Mreža Za Varjenje Mrež nakup rabljenega (84.655)

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Technische Daten: - Zum Verkauf steht eine vollautomatische Schweißgitteranlage PITTINI / EVG - Gitterbreite: max. 2400 mm - Gitterlänge: max. 8000 mm - Längsdraht-Ø: max. 10 mm - Querdraht-Ø: max. 10 mm Iajdpfx Aljfwm D Tsast - Max. Anzahl Längsdrähte: 24 - Längs- und Querdrahtzufuhr von Spulen - Querdraht-Einzugseinheit: EVG - Arbeitsgeschwindigkeit: max. 110 Takte/min - Installierte Leistung: 1,5 MW - Automatische Gitterpaketierungseinheit

Stanje: rabljeno, Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D34E/8218, Ponudbena številka: D34E/8218 Vrsta stroja: Stroj za varjenje mrež Proizvajalec: SCHLATTER Tip: PG8 Letnik: 1970 Iodpfx Alowi Thmsaeat Premer žice: 1,5-6,5 mm Delovna širina: 850 mm Razdalje vzdolžnih žic: 20-60 mm Razdalje prečnih žic: 10-100 mm Lokacija: V Evropi

Leto izdelave: 1988, stanje: pripravljen za uporabo (rabljen), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm–1600mm, mesh length range: 600mm–2900mm, minimum cross wire spacing: 15mm, minimum longitudinal wire spacing: 25mm, increments of longitudinal wire spacing: 5mm, wire diameter range: 3mm–8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50% duty cycle: 6 x 130 kVA. An on-site inspection is possible. Iajdpfx Aewfg Ewelaet

Stanje: novo, Leto izdelave: 2025, Starweld PE STARWELD PE je visoko zmogljiva varilna linija za izdelavo drobnih in lahkih mrež v zvitkih ali zvitkih in listih. Mehanizmi so zasnovani tako, da je izdelana mreža kakovostna, tudi če je obdelana žica zelo majhnega premera. Izdelki se lahko uporabljajo za kletke, ograje itd. Lastnosti: Napajalna in križna žica, ki se napaja iz tuljave Obrezovanje robov Rezanje mrežaste tkanine Popolnoma ali polavtomatski sistem za rezanje, valjanje in izvrtanje mrež Odlična natančnost mrežnega očesa Popolnoma avtomatski CNC programabilen Visoka hitrost Visoka natančnost z napredno servo tehnologijo Enostavne prilagoditve stroja Enostavno vzdrževanje in uporaba Ijdpfx Asd Rlaislaoat Visoka zanesljivost in dolga življenjska doba Specifikacije Model PE2100 PE2600 PE3100 Širina mrežnega očesa (mm) 2100 2600 3100 Najmanjši razmik med žicami (mm) 25 25 25 Najmanjši razmik med žicami (mm) 12,5 12,5 12,5 Območje premera žice (mm) 1,2-3 ali 1,4-3 ali 1,4-3,5 1,2-3 ali 1,4-3 ali 1,4-3,5 1,2-3 ali 1,4-3 ali 1,4-3,5 Delovna hitrost (gibi / min) do 160 do 150 do 130

Stanje: novo, Leto izdelave: 2025, STARWELD PO je visokozmogljiva mrežna varilna linija za izdelavo srednje težkih in težkih žic ali ojačitvenih mrežastih plošč. To je linija, primerna za velike proizvodne potrebe. Oblikovanje je narejeno v skladu s specifičnimi parametri projekta in vrste mreže - npr. po želji lahko stroj ima tudi valjarni mehanizem za izdelavo zvitkov. PRATTO lahko dobavi vso potrebno pomožno opremo. Izdelki se lahko uporabljajo v gradbeni industriji. Uporabljajo se tudi za police, mreže, kletke, palete in posode, pa tudi za ograje (navadne in upognjene). Lastnosti: Dovod žice iz tuljave Prečna žica, ki se napaja iz tuljave Obrezovanje robov (neobvezno) Zlaganje plošč (neobvezno) Nagibanje plošče (neobvezno) Kotalni mehanizem (neobvezno) Upogibna enota (neobvezno) Odlična natančnost mrežnega očesa Popolnoma avtomatski CNC programabilen Isdpfx Aljd Rlalsaeat Visoka hitrost Visoka natančnost z napredno servo tehnologijo Enostavne prilagoditve stroja Enostavno vzdrževanje in uporaba Visoka zanesljivost in dolga življenjska doba

Stanje: rabljeno, Automatic Reinforcement Mesh Welding Machine MCC001 This machine is designed for welding steel reinforcement meshes from pre-cut reinforcement rods in compliance with EN 10080. Technical data: Reinforcement rod diameter: 4 mm, 5 mm, 6 mm Number of longitudinal rods: 2 – 12 Length of longitudinal rods: 200 mm – 3000 mm Minimum distance between longitudinal rods: 100 mm Spacing between transverse bars: 10 mm – 999 mm Length of transverse bars: 100 mm – 1250 mm Mesh movement speed: 0.1 m/s – 1 m/s Clamping force: 60 kg – 190 kg Productivity: 1 cycle/min Electrical: Supply voltage: 400 V Supply frequency: 50 Hz Connection type: TN-C Total power: 100 kVA Maximum motor power: 0.8 kW Single welding transformer power: 35 kVa Iaodsymcpyopfx Alaet Pneumatics: Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling: Cooling type: Water cooling Circulation type: Forced circulation Maximum incoming coolant temperature: 35 °C Coolant consumption: 60 l/min

Stanje: rabljeno, EVG G95 Reinforcement Mesh Welding Line 2.5 x 6 m Welding lines for efficient production of standard reinforcement mesh in medium to large batch sizes. - Fully automatic and ultra-dynamic feeding of wires from coils - Very high production speeds on single-pass welding lines - Utilization of double spot welding as the ideal technology for the thicker wire diameter range Scope of supply: Complete machine with supports. Optional: Fixed coils up to the outfeed conveyor belt. Iedpfoymb Unjx Alasat Technical data: Longitudinal and cross wire diameter: 5 – 12 mm Longitudinal wire spacing: 100, 150, 200 mm 36 horizontal longitudinal wire supports for 3-ton coil Cross wire switch with double horizontal decoilers Bundling and lifting machine for sheets not included Maximum welding width: 2,600 – 3,200 mm Longitudinal and cross wire diameter: 5 – 12 mm Longitudinal wire spacing: 100, 150, 200 mm 36 horizontal line wire supports: for 3-ton reel

Stanje: rabljeno, Automatic mesh welding line TE 30 S manufactured by EUROLLS Model: TE 30 S Maximum stacking height: 500 mm Wire diameter: - Top line (ds – smooth or barbed): 4 to 12 mm - Bottom line (di – smooth or barbed): 4 to 12 mm - Diagonal wire (dg – smooth or barbed): 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot- and cold-drawn wire: max. 30 m/min Iajdpfx Aljvtqaceaet Maximum feeding coil weight: 3,000 kg

Leto izdelave: 1978, stanje: zelo dobro (rabljeno), Tehnične podrobnosti: - Proizvajalec: DRAWEBA - Model: DDANS 17 l - Leto izdelave: 1978 Ijdpfx Alslf Iqnsaoat - Premer žice: 1,4 - 1,6 mm - Velikost odprtine mreže: najmanj 10 x 10 mm - Širina mreže: 1600 mm

Stanje: dober (rabljeno), Ideal for pallet racks with a frame depth of 800 mm and 2700 mm beams. Also suitable for other applications. Size: 1340*820 mm (55*105 mm) Load capacity: approximately 400 kg/m² If you require shelving or accessories in different configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories, and are happy to assist you with your planning. Further accessories such as: Frame protectors, corner and collision guards, push-through protections, chipboard panels, wire mesh shelves, rear mesh panels, and depth supports are available. Shipping: Please inquire about shipping costs, specifying your postal code, location, and the required quantity of articles. Additional services: Planning, rack assembly/disassembly, purchase/sale Specifications, information, and prices are subject to change and errors excepted. Sale subject to prior sale! Ijdpshbhavofx Alaeat

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), HM saw blade side grinding machine Petschauer model FL600 Isdjd Emc Uepfx Alaeat

Leto izdelave: 2003, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Platforms with double dosing units. Ijdpsudwl Uofx Alasat - Control cabinet (electrical cabinet) - Extraction system - Differential pressure gauge - Safety features - Anti-slip floor

Stanje: novo, Leto izdelave: 2025, STARWELD PCB-SA je visokozmogljiva mrežna varilna linija za izdelavo srednje težke in težke žice ali ojačitvenih mrežastih plošč iz predhodno poravnanih in vnaprej odrezanih palic. Je bolj varčna in bolj poceni varilna linija v primerjavi z linijami za obdelavo žic iz tuljav; zaradi tega je STARWELD PC-SA primerna linija, kadar je na voljo manj prostora. Zasnova je narejena v skladu s specifičnimi parametri tipa projekta in mreže. PRATTO lahko dobavi vso potrebno pomožno opremo. Izdelki se lahko uporabljajo v gradbeni industriji. Uporabljajo se tudi za police, rešetke, kletke, palete in posode, pa tudi za ograje (navadne in upognjene). Iajdjf Ar N Uepfx Alast

Stanje: generalkompletno obnovljen (rabljeno), SCHLATTER MG24 Electro-Welded Mesh Production Line Completely refurbished WORKING RANGE Panel width: max. 2500 mm Cross wire length: min. 900 mm Cross wire length with QF5 distributor: min. 300 - 1600 mm Distance between extreme longitudinal wires: max. 2400 mm Mesh length (longitudinal wire length): max. 2500 - 6000 mm Longitudinal wire spacing: min. 100 mm Cross wire spacing: 25-250 mm Adjustable via cutting device (0-1) Longitudinal wire diameter: 4.0 - 12.0 mm Cross wire diameter: 4.0 - 12.0 mm Number of longitudinal wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Basic equipment includes: - 1 Machine frame - 1 Upper support for press reception, infinitely adjustable by handwheel - 1 Magnet supports with holding magnets and monitoring of cross wires - 1 Row of pneumatic solenoid valves for press operation - 1 Air and water supply installation - 2 Pneumatic rotary actuators with oil damping - Static torque at 5 bar compressed air: 480 Nm - Front section continuously adjustable from: 25 - 250 mm, adjustable via cutting device (0-1) - 1 Forward feed carriage with panel lifting device - 1 Tool set for machine adjustment WELDING SECTION includes: 8 Type C transformers Rated power per transformer: 100 kVA Secondary no-load voltage: 7.1 V Rated secondary current: 14 kA 8 ES 130 thyristor contactors 12 Welding presses: 5.0 kN 12 Longitudinal current bridges for wire spacing: 50-100 mm 12 Longitudinal current bridges for wire spacing (for staggered wires): 100 mm 10 Longitudinal current bridges for wire spacing: 100-150 mm 8 Longitudinal current bridges for wire spacing (for staggered wires): 150 mm 6 Longitudinal current bridges for wire spacing: 150 - 200 mm 6 Longitudinal current bridges for wire spacing (for staggered wires): 200 mm 24 Lower Cu electrode holders with standard angle electrodes, each with a water-cooled current cable, width: 58 mm 24 Wire holding clamps Panel width: max. 2500 mm Cross wire length: min. 900 mm Cross wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme longitudinal wires: max. 2400 mm Mesh length (longitudinal wire length): max. 2500 - 6000 mm Spacing between longitudinal wires: min. 100 mm Iajdpfx Alswu Tu Deaot Spacing between cross wires: 25-250 mm Longitudinal wire diameter: 4.0 - 12.0 mm Cross wire diameter: 4.0 - 12.0 mm Number of longitudinal wires: max. 24

Stanje: dober (rabljeno), Škarje za rezanje pločevin iz jeklene žice Rezalna dolžina: 3900 mm Dimenzije: Dolžina: 5100 mm Iajdpfjgiplvjx Alaet Širina: 1700 mm Višina: 3100 mm

Stanje: pripravljen za uporabo (rabljen), Stroji za uporovno varjenje, uporovni varilnik, Meritus RAS 150 VSH, rabljeni stroj Isdpfxordf Ace Alajat Proizvajalec: Meritus Tip: RAS150VSH, MPW-RW 811-1410 Skupne mere: 900 x 1370 x 2450 mm Električni podatki: 415 V; 150 kVA; 50 Hz Opremljen s svetlobno zaveso Orodje s hlajenjem z vodo

Stanje: pripravljen za uporabo (rabljen), Stroj za varjenje PE-KPE cevi, stroj za čelno varjenje, varilec plastičnih cevi, stroj za zrcalno varjenje, DYTRON ST 160, rabljeni stroj Proizvajalec: DYTRON Model: ST 160 Skupne dimenzije: Dolžina: 1000 mm Širina: 530 mm Višina: 1160 mm Električni podatki: 230 V Iajdpfx Alsxnqt Ueast DYTRON – Varilna klop ST-160 ST 160 varilna klop je namenjena za čelno in zrcalno varjenje termoplastičnih cevi. Omogoča: - Zrcalno (čelno) varjenje: 40 – 160 mm premera - Puhalno (ragljo) varjenje: 40 – 110 mm premera Za lažje zrcalno varjenje vsebuje set: - Posebna mobilna delovna klop - Električni obrezovalnik cevi - Varilni agregat POLYS P-4a (1200 W) - Vložki za vpenjalke v dimenzijah: d40, 50, 63, 75, 90, 110, 125, 140 mm - Varilni nastavki (pari): d40, 50, 63, 75, 90, 110 mm - Primež-vpenjalni mehanizem za fitinge - Zrcalni nastavek: d170 - Kovček za dodatke - Podporno stojalo - Inbus ključa: 4 mm in 8 mm ST-160 varilna klop je opremljena z mikroprocesorsko nadzorovanim varilnim agregatom. Standardni komplet vključuje tudi posebno delovno klop in kovček z dodatki. Tehnične specifikacije ST-160 Funkcija: Tehnični podatki - Puhalno (ragljo) varjenje: 40 – 110 mm - Zrcalno (čelno) varjenje: 40 – 160 mm - Moč varilnega agregata: 1200 W - Moč obrezovalnika: 630 W - Napajanje: 230 V / 115 V - Regulacija temperature: elektronski regulator - Temperaturno območje: 180 – 280 °C - Indikator temperature: LED dioda - Obrezovalnik: Električni - Teža: 70 kg

Stanje: rabljeno, 1 postavka = 720 kg varilnih elektrod BÖHLER-THYSSEN Varilne elektrode za elektrovarjenje Skladiščeno na suhem, v 6 kg paketih Tip: Phoenix SH Gelb B + Phoenix Spezial Gelb AWS A5.1-91 Št. artikla: 18952 Premer elektrode: Ø 5 mm Dolžina elektrode: 450 mm DIN: EN 499-E38 2 RB 12 - Rutilno-bazična obložena palica. - Enostavno varjenje koreninskega, polnilnega in zaključnega sloja - Odlične lastnosti za navpično varjenje Iodjxcnktopfx Alajat - Primerno za rentgensko čisto varjenje v cevovodih, kotlih in rezervoarjih - Uporabno na predhodno obdelanih pločevinah - V originalni, neodprti embalaži, skladiščeno Skupna teža: 720 kg

Stanje: rabljeno, Straightening and welding plate, cast steel/cast iron, heavily ribbed Cast plate, heavy-duty straightening plate Length: 1500 mm Width: 1000 mm Thickness: 100 mm Iodpsrl U Swsfx Alaoat Plate thickness: approx. 37 mm throughout Table height: 860 mm - Table base made of steel (custom-built) Weight: 640 kg Good condition

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The pneumatic butt welding machine type Sv‑63P features a robust vertical structure comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable slides connected to a horizontal cylinder for compressing the workpiece. The movements of the slides are mechanically limited in both directions—for clamping and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the set jaw distance is controlled via foot pedals. An additional control cabinet with switches and buttons allows for individual or simultaneous clamping and supports both manual and automatic welding. Once welding is complete, the clamping jaws open, and the slides return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the machine cover, a compressed air maintenance unit with a pressure regulator is fitted for adjusting the clamping force. The machine’s main power switch is located on the controller used for setting the welding parameters. Iodpfx Aljyqr Sxoaoat

Leto izdelave: 1999, stanje: dober (rabljeno), Dolžina žebljev - 50 - 90 mm Hitrost - 100 žebljev/sek. (regulator frekvence) Iedpfxodmbp Us Alasat Upravljanje - PLC Siemens S5

Stanje: rabljeno, Leto izdelave: 2002, Oprema: dokumentacija / priročnik, Tehnični podatki v prilogi. Robot vključuje pozicioner obdelovanca in varilno tehnologijo. Iaodpfx Aley Emz Seaot

Leto izdelave: 2026, obratovalne ure: 5 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovno območje: 500 mm, številka stroja/vozila: RC-1-0505, CNC stud welding machine RC-1-0505 consisting of: 2-axis system 500 x 500 mm, motor-driven KAH100 welding head with automatic stud feeding system Tip ignition welding unit CDP-99 Stud diameter: M3-M8, length range: 8-25mm Welding materials: steel, stainless steel, aluminum Full enclosure with pneumatically operated safety door plus additional light curtain safety system User-friendly control system The RC-1-0505 stud welding unit stands out with its high-quality features and safety enclosure with protective windows and additional light curtain. A CDP-99 stud welding device for tip ignition welding, a fully automatic stud feeder, and a KAH100 welding head are included. The machine's working area is 500 x 500 mm. The system is easy to operate and program, even for untrained users. Weld positions can be set via cross laser and hand control unit Iedpfx Alsy Stahjasat using the teach-in method. Model RC-Z-0505 NEW and unused Working area X 500 mm x Y 500 mm motor-driven, Z 150 mm manual External dimensions L 1016 mm x W 1350 mm x H 1663 mm Traverse speed max 40 m/min Compressed air 6 bar, buffer tank for pressure fluctuations included Power supply 380 V / 50 Hz, CEE 16A connection, 2.5 kW

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Friction welding machine from manufacturer MTI, equipped for welding turbochargers. The machine features: - Siemens PLC, CPU 315 - Rexroth hydraulics - German operator interface - CE certification Upon request, this machine can be retrofitted for many other welding applications. Iodpfev Uzf Esx Alaoat

Stanje: novo, Leto izdelave: 2023, doseg roke: 1.400 mm, nosilnost: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Model: AB6-C1400 Iaodpfx Aeqnt N Dolast -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control -Wire feeder -Welding power source: TIG WSM400R -Cooler