Motorizirana vrtljiva in nagibna miza za varjenje

GCB ZHBJ 06

Stanje: novo, Table length: 1220 mm Table width: 760 mm Table height: 910 mm Weight: 226 kg Nitrided welding table workbench + 66 accessories included Benefit from the best of both worlds: the functionality and quality of GERD WOLFF welding tables combined with the mobility of a cart. The workbench has a replaceable, robust tabletop that accommodates all TM fixture components with a diameter of approximately 1.6 cm. This allows you to create ultimate, high-performance, compact mobile workstations. Expand your clamping and fixturing possibilities and be prepared for new projects with the GERD WOLFF welding table workbench + fixture set. The GERD WOLFF welding table workbench with fixture set is a turnkey system for holding and clamping during welding and manufacturing. Clamp and fixate at any point on the reversible, double-sided precision ground, nitrided (heat-treated) 121.92 x 76.2 cm tabletop to ensure accuracy in all your setups. Fpodpsxqrhlofx Aprsk Technical specifications Hole diameter: approx. 1.6 cm Grid pattern: approx. 5 cm x 5 cm Tabletop size: 121.92 cm x 76.2 cm Tabletop thickness: approx. 1.6 cm ±0.01 cm Table flatness: ±0.0381 cm per 60.96 cm x 60.96 cm Table height: approx. 91 cm Static load capacity: approx. 680.4 kg Gross weight: approx. 222.26 kg Fixture Set (5/8-inch = 1.5875 cm) 2 x Inserta clamps, suitable for 1.5875 cm boreholes (UDN5150) 2 x Side clamps, suitable for 1.5875 cm boreholes 2 x Inserta locking pliers – suitable for 1.5875 cm boreholes (PTT522K) 2 x Inserta locking pliers – suitable for 1.5875 cm boreholes (PTT634K) 2 x Magnetic V-pads for surface 2 x Locating pins, suitable for 1.5875 cm boreholes 2 x Angle brackets, 1.5875 cm boreholes (T50305) 2 x Angle brackets, 1.5875 cm boreholes (T50304) 4 x Stops, suitable for 1.5875 cm boreholes (T54203) 4 x Stops, suitable for 1.5875 cm boreholes (T54205) 4 x V-block spacers, suitable for 1.5875 cm boreholes 8 x D-stop bars, 1.5875 cm boreholes 8 x V-blocks, suitable for 1.5875 cm boreholes 10 x Ball lock bolts, suitable for 1.5875 cm boreholes 12 x Magnetic rests

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna višina: 4.200 mm, skupna širina: 3.620 mm, skupna dolžina: 1.760 mm, nosilnost na odsek shranjevanja: 350 kg, gradbena širina: 3.050 mm, trajanje garancije: 12 meseci, Oprema: varnostna svetlobna zapora, Kardex IND 351-1418, model 2000 Število naprav: 2 Naprava je razstavljena in zapakirana. Ponudba vključuje tudi transport in ponovno montažo. Dimenzije naprave: Višina: 4200 mm Širina: 3620 mm Globina: 1760 mm Dimenzije nosilca: Nosilnost: 340 kg Širina: 3050 mm Globina: 520 mm Višina nosilca: 400 mm Skupna nosilnost: 4440 kg, prazna teža: 2000 kg Barva: bež Na voljo: takoj Fpsdjzizhrjpfx Aprsk DGUV bo ob dostavi na novo izdan. Obveščamo vas, da trenutno prodajamo ali dostavljamo samo v države D-A in Beneluks. Prosimo za vaše razumevanje. Števila naprav: 1598, 1599

Stanje: novo, 50 m paletnih regalov Jungheinrich, tip MPB, nova roba Nova roba, glejte slike. Fpsdpolp Ntgjfx Aprsk Višina 9 m Globina 110 cm, modra Dolžina nosilca 2,7 m, rumena Nosilec s kapaciteto/polico 3000 kg Pogajanje o ceni: 12.750 €, neto, dobava iz skladišča Ponudba vključuje: + 19 kosov okvirjev, predmontiranih, globina 110 cm, višina 9 m + 144 kosov nosilcev, dolžina 2,7 m, kapaciteta 3000 kg/polica + 288 kosov varnostnih zapah + 78 kosov betonskih sidrov Tabele s podatki o nosilnosti, dokumentacija itd. so seveda vključene. Dodatne dodatke najdete v katalogu dodatne opreme. Okvirji so modri, poličnice so pocinkane. Na zalogi so višine od 3,5 m do 9 m. Nosilnost polja je 12 ton. Nosilci so rumeni. Blago je na zalogi. Transport in montaža sta možna po dogovoru. Ogled je možen kadarkoli po dogovoru. Dodatne informacije so na voljo po povpraševanju. Stalno imamo na zalogi več kot 5000 m paletnih regalov različnih proizvajalcev. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, specifikacijah in cenah ter do vmesne prodaje! Glejte naše splošne pogoje, vse cene so brez DDV, dobava iz skladišča). Lenox Trading – vrhunska skladiščna tehnika in regalni sistemi za težke obremenitve, rabljeni in novi. Opis: Iščete kakovostne skladiščne regale za nakup? Lenox Trading je z okoli 100 zaposlenimi eden največjih trgovcev z novo in rabljeno skladiščno opremo v celotnem območju DACH (Avstrija, Nemčija, Švica). ⚡ TAKOJ NA VOLJO: • Več kot 10.000 tekočih metrov regalov, ki so na voljo takoj • 20.000 m² skladiščnih ploščadi in jeklenih konstrukcij, na voljo takoj • Tedensko 30–50 tovornjakov s tovorom za maksimalen izbor 📦 NAŠA PONUDBA (UGODEN NAKUP V SPLETU): Ne glede na to, ali kupujete paletne regale, regale za težke obremenitve, visoke regale, regale s policami, regale za pnevmatike ali regale za IBC-kontejnerje – dostavljamo in montiramo po vsej Evropi s svojo lastno ekipo! Vključno z načrtovanjem v CAD, transportom, demontažo in montažo. 🏭 VRHUNSKE BLAGOVNE ZNAMKE, RABLJENE IN IZ LIKVIDACIJE/STEČAJA: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tip MPB, tip E, regali za težke obremenitve Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Regali s konzolnimi rokami (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠ DRUGI POSLOVNI STEBER: SPLETNE AVKCIJE IN LIKVIDACIJA Pri demontaži in čistilnih delih ponujamo resnično celovito storitev: 1. Pristojna nakup: nakup trgovskega blaga, opreme in celotnih skladiščnih zalog, vključno s popolnim čiščenjem. 2. Provizijska dražba: izvedba dražb v imenu stranke. Naša storitev s polnim obsegom, ki jo izvajajo naši lastni zaposleni: katalogizacija, priprava pisarne, ogled, izročitev blaga, logistika, demontaža in čistoča ob izročiti. Ne glede na to, ali ste o nas izvedeli prek regalov za težke obremenitve ali iščete pocinkan regal za težke obremenitve / regalski sistem za težke obremenitve – zagotavljamo najboljše pogoje. Kontaktirajte nas za neobvezujočo ponudbo!

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06007153/001, skupna višina: 6.050 mm, skupna širina: 3.380 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 210 kg, gradbena višina: 6.050 mm, vhodna napetost: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of manufacture: 2006 Total Load: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available on request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (The height of the Kardex can be adjusted to the available height) Power supply: 3/N/PE 400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed. More or heavier trays available on request. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - One access opening with sliding doors for safety of personnel and stored goods - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest order picking - Distances can be set in 25 mm increments by arranging the support profile, a prerequisite for high-density storage - Weight management controls the tray load - Including light pointer Fedpfxexq Tbtj Aprepk Price: On request via email only Price: excl. VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Stanje: novo, Leto izdelave: 2025, najv. debelina jeklene pločevine: 3 mm, - Capacity 1070 x 3 mm - Roll diameter 90 mm - Electrically adjustable rear roll - Digital display - Hardened rolls - Capability for conical rolling - Swiveling top roll - Brake motor - Foot control - Emergency stop - Documentation Fpsdoi E Tzqopfx Aprsk - 400V

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Rabljena 2-metrska CNC upogibna stiskalnica Trumpf Tip: V85 Kapaciteta: 2050 x 85 ton Delem CNC upravljanje CNC upravljanje osi Y1, Y2, X in R Wila hidravlična zgornja pritrditev Letnik izdelave: 2005 Fpjdpsx I N Awofx Aprek Brez orodij

Stanje: novo, Bernardo TM 36 BLO/ R 1200 Electric Tapping Machine Technical Specifications Tapping Capacity*: M5 - M36 Tool Holder: GT 24 Max. Speed: 30 - 150 rpm Adjustable Angle: 0° - 90° Max. Working Radius: R 1200 mm Quick-Change Collets (DIN 376): M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor Power: 1200 W Voltage: 230 V Approx. Weight: 35 kg * For material strength of 400 N / mm² Scope of Delivery: - Operation via touchscreen - Digital drilling depth display - Micro-spray system - Chip blower unit - Quick-change tool holder - Quick-change collets according to DIN - Electric motor - 90° angle adjustment - Mounting flange Features: - Fitted as standard with a micro-spray system for constant cooling and minimal coolant consumption - Includes chip blower unit for removing chips, ensuring optimal view of the borehole - Includes quick-change collet for use with taps for through and blind holes - Swiveling motor unit allows tapping at any desired angle between 0° and 90° - Higher accuracy compared to manual tapping; threads are guaranteed to be perpendicular (90°) - High productivity, significant time savings compared to manual tapping - Quick-change collet with integrated slip clutch prevents tap breakage Fpedpfxjpag R Rs Aprok - Includes swivel arm with large radius for easy positioning of the tap to the workpiece - Suitable for tapping in steel, stainless steel, aluminum, and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series €830.00 plus 19% VAT

Stanje: novo, Table diameter 900 mm Table load capacity 1.0 t Swivel range 135 degrees Rotational speed 0.12 - 1.2 rpm Faceplate height 820 mm Welding current 500 amperes Total power requirement 0.75 + 0.55 kW Machine weight approx. 1.1 t Space requirement approx. 1.5 x 1.0 x 0.9 m • Self-locking gearbox, therefore no overrun or backrun under eccentric load. • Electronic components from Schneider, Siemens, and Delta. • Infinitely variable speed control of the turntable via frequency inverter. • High stability due to robust construction. • Welding current transmission. • CE certificate. • Excellent price / quality ratio. • The D-HBE series is supplied as standard with a wired remote control and foot switch. Fsdpfx Aofv Axxjprjpk

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Pressure: 60.0 t Bending length: 1270 mm Frame gap: 1000 mm Throat depth: 410 mm Ram speed: 160 mm/sec Working speed: 10.0 mm/sec Return speed: 165 mm/sec Stroke: 275 mm Installation height: 530 mm Table height: 900 mm Table width: 90.0 mm Backgauge - adjustable max.: 800 mm Oil capacity: 150 ltr. Operating voltage: 400 V Motor power: 7.5 kW Weight: 4320 kg Dimensions (L x W x H): 2250 x 1960 x 2750 mm Demonstration/Showroom machine (!!) From our showroom (like NEW) Very low operating hours The POWER BEND PRO press brake from ERMAK is an extremely versatile, productive, and precisely controlled machine, available in various bending lengths from 1,270 mm up to 6,000 mm. It offers a wide range of press forces from 40 to 400 tons to meet your individual requirements. This CNC-controlled press brake can also be configured as a tandem machine, providing extensive flexibility regarding bending lengths. It features numerous functions that ensure easy and safe operation. The robust machine design, in combination with precise CNC control, guarantees long-lasting and reliable performance. Furthermore, the machine offers a variety of expansion and configuration options to tailor it to your specific needs. The DELEM DA CNC graphical control enables convenient operation via touchscreen and provides a comprehensive safety package. The machine can be easily operated using an LCD touchscreen located on the left swivel arm. Bending operations are initiated by means of a foot switch. In addition to this safety feature, the operator is protected by a safety laser in the working area and a rear light curtain. The CNC control automatically calculates pressing force, bending tolerance, crowning adjustment, embossing force, and tool safety zones for the press brake. ----- Fpodpfxsxabt As Aprok POWER BEND PRO CNC press brake with special equipment: * "ERGO" design – knee clearance for the operator * Flexible articulated arm mount for the control unit * Increased installation height * Enlarged cylinder stroke * Increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" Graphic/Touchscreen * 2D graphical programming * 15" high-resolution TFT color display * Bend sequence calculation * Product programming and display to actual size * USB interface - CNC-controlled axes: Y1 - Y2 - X - R - CNC electro-motorized backgauge * Backgauge with R-axis, on recirculating ball screws * Travel ranges: X = 800 mm // R = 250 mm * Traverse speed X-axis: 230 mm/s * With 2x manually adjustable stop fingers - ROLLERI gooseneck upper tool "PS 135.85-R08," system "A" * Including quick-change clamp * Including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * Including 1x die shoe "C 1050-R" - Rear safety device: Light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device...

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, rabljeni kontejnerski objekt, suh, tesen, čist - proizvajalec ALHO - sestavljen iz 16+2 kosov 20 ft kontejnerjev = približno 270 m² - trenutna uporaba: nadomestna šola - prost od 31. 07. 2026 dalje Mere posameznega kontejnerja: Dolžina: 6,00 m Širina: 2,50 m Zunanja višina: 2,95 m Notranja višina: 2,50 m Izolacija: Stena: 80 mm Tla: 100 mm Strop: 80 mm Fedozhgt Rjpfx Apropk Oprema: - osrednje stopnišče iz 2x 20ft kontejnerjev - 4 učilnice, vsaka sestavljena iz 4x 20ft kontejnerjev - 2 evakuacijski stopnici za zgornje nadstropje - PVC okna z izolacijskim steklom in nagibno/vrtilno funkcijo - žaluzije - električno ogrevanje - tesnilne gume - stenske obloge - stropne obloge - prehodne pločevine - spojne sponke za kontejnerje - akustični elementi Proizvajalčeva dokumentacija je na voljo. Nakladanje in transport je možno organizirati. Odgovarjamo samo na resne in kredibilne poizvedbe z navedbo imena, e-poštnega naslova in telefonske številke.