Mm 2010 Druckstrahlkabine Integrierter Patronenfilter nakup rabljenega (80.337)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Our powerful sandblasting cabinet "MM 2010" operates using the pressure blasting method and is suitable for all types of blasting media thanks to its innovative media recirculation system. The bucket elevator, which is firmly connected to the blasting cabinet, allows even the heaviest media types, such as stainless steel shot, steel cast grit, and other metallic abrasives, to be used without issue. Unlike competing systems, the abrasive is not vacuumed back but transported to the adjacent bucket elevator using a flat conveyor system. The bucket elevator lifts the material upwards and deposits it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed blasting media recirculation and recycling system ensures continuous abrasive supply regardless of the extraction system’s suction capacity. Thanks to the recirculation system for blasting media and innovative fan technology, the blasting cabinet features very low energy consumption (0.75 kW fan motor). Because the abrasive is not vacuumed back, there is no need for an oversized dust extraction system with high power consumption, as is required by many competing systems. For maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure vessel. This vessel includes a pressure regulator for infinitely adjustable blasting pressure, ranging from 0.1 to 12 bar. For safe operation, a water separator is permanently installed on the blasting pressure vessel, protecting the blasting media from moisture. The pressure blasting nozzle is made from highly wear-resistant boron carbide, enabling service lives of up to 1,000 hours depending on the abrasive used. The blasting chamber is lined with wear-resistant rubber, which enhances the service life of the blasting media and protects the cabinet from wear. An air blow gun is installed for cleaning blasted workpieces and the interior walls of the cabinet. Lsdewc Nrnspfx Adlshg The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber and maximum service life for the blasting media. The dedusting unit features continuous filter cartridge cleaning by means of pulse-jet compressed air, ensuring long filter service life and consistently stable extraction performance in the long term. Loading of the blasting chamber is carried out via an angled front flap which swings fully upwards, allowing loading by forklift or crane. The robust working grating supports up to 500 kg. To ensure optimal visibility inside the chamber, two powerful and energy-saving LED lights are mounted on the cabinet roof, dust- and wear-protected by their rooftop installation. The system is operated via a modern touch display. For safe operation, the blasting cabinet is fitted with a door safety switch. The installed viewing windows are made of toughened safety glass (ESG) and protected with a wear-resistant film.

Stanje: dober (rabljeno), Kontejner, transportni kontejner, pomorski kontejner, jekleni kontejner, ISO kontejner, materialni kontejner Lhodpfx Adsyv Axhjlsg - Jekleni kontejner: materialni kontejner z lesenim podom, razsvetljavo in obešalnimi kljukami - Notranja mera kontejnerja: 2940/2010/V2000 mm - Mere za transport: 3050/2100/V2140 mm - Transportna teža: 560 kg

Stanje: dober (rabljeno), Kontejner, transportni kontejner, pomorski kontejner, jekleni kontejner, ISO kontejner, materialni kontejner -Proizvajalec: Säbu, jekleni materialni kontejner s policami Lhedpfx Adew Tkf Neljg -Notranje mere kontejnerja: 2920/2010/H2010 mm -Transportne mere: 3000/2100/H2125 mm -Transportna teža: 760 kg

Stanje: dober (rabljeno), Clamping plate, scribing/surface plate, measuring plate, measuring table, straightening plate, marking plate, inspection plate, precision measuring table - Clamping plate: with support ribs - Clamping surface: 2010 x 4010 mm - Plate thickness: 55 mm Lhedpfx Ajw Hz Rkodlog - Plate: with support ribs - Quantity: 1 clamping plate available - Price: per piece - Dimensions (each): 2010/4010/H350 mm - Weight: 6100 kg/piece

Stanje: dober (rabljeno), T-slot plate, clamping plate with holes, plate field, welding table - Dimensions: 3012/2010/H710 mm - Plate thickness: 82 mm - Plate: with support ribs - Weight: 3370 kg Ledpscpc Spofx Adlshg

Stanje: dober (rabljeno), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley - Angle steel frame: 90 x 90 x 10 mm - Heavy-duty transport trolley - Load capacity: 1000 kg - Quantity: 1 unit available - Price: per unit - External dimensions: 1385/2010/H360 mm Lhjdpfxeb Hw Dgo Adlsg - Net weight: 126 kg

Stanje: dober (rabljeno), Aluminum table, aluminum workbench Lsdpfx Ajb Rgyqedljhg -Material: aluminum -1x base shelf -2x plastic worktops -Dimensions: 1210/2010/H800 mm -Weight: 70 kg

Leto izdelave: 2010, stanje: rabljeno, Leto izdelave: november 2010 Novo: Ne Lhedpfx Adjxva Udsljg RABLJENE PRIKOLIČNE GUME 425/65 R 22.5 | 12 MM 200 EUR | 6 MM 125 EUR | 3 MM 100 EUR | VKLJUČNO S PLATIŠČEM.

Leto izdelave: 2010, stanje: rabljeno, Leto proizvodnje: november 2010 Novo: Ne RABLJENE PRIKOLIČNE GUME 425/65 R 22.5 8 MM 150 EUR, 6 MM 125 EUR, 4/3 MM 100 EUR VKLJUČNO S PLATIŠČEM. Lhedpfx Ajxvbaujdljg

Leto izdelave: 2010, stanje: rabljeno, Letnik izdelave: november 2010 Novo: Ne Lodpfxsxva Sve Adlshg RABLJENE PRIKOLIČNE GUME NA PLATIŠČU Z 10 LUKNJAMI ZA KMETIJSTVO ALI TRANSPORT.

Leto izdelave: 2010, stanje: rabljeno, Leto izdelave: november 2010 Novo: Ne Lhedoxvbc Nopfx Adljg RABLJENE PRIKLOPNE GUME 425/65 R 22.5, PROFIL 4/6 MM, 100 EVROV NA KOS, ZA KMETIJSTVO ALI TRANSPORT.

Stanje: zelo dobro (rabljeno), V-belt pulley, pulley with taper bush, taper tension bush, taperlock tension bush Lodpsm T Ahlsfx Adlohg - V-belt pulley: 10-groove pulley, unused - V-belt width: 22 mm - Taper bush mount: Ø 100 x 100 mm (interchangeable) - Dimensions: Ø325 x 265 mm - Weight: 66 kg

Stanje: rabljeno, Predalnik, omara za orodje, kovinska omara, delavniška omara, kovinska garderobna omara - Omara za orodje: kovinska omara z 2 policama Lodpfx Adjx D T Uyjlohg - Širina: 935 mm - Globina: 410 mm - Višina: 2010 mm - Vrata: zaklepajoča, brez ključa - Teža: 59 kg

Stanje: rabljeno, Različni konzolni regali 4x regal: Mere: 6.125 x 2.400 x 3.000 mm Teža cca: 8.000 kg 2x regal: Mere: 5.650 x 2.400 x 3.000 mm Teža cca: 7.380 kg Statični izračuni na voljo Lsdpfxjyrq Nle Adljhg !! Slika 1 prikazuje regal v sestavljenem stanju !!

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, delovna širina: 260 mm, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 260 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 4.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, Oprema: kabina, motorna zavora, Weinig Profimat 23 E Delovna širina: 260 mm, Delovna višina: 170 mm, 5 vreten, Premer vretena: 40 mm, Razporeditev vreten: 1- Spodaj - 5,5 kW 2- Desno + 3- Levo - 11 kW 4- Zgoraj - 5,5 kW 5- Spodaj - 11 kW Lhsdpfxsy S E Spj Adlog Pomik: 6 – 24 m/min - 4 kW Zračni jastuk v mizi En pogonski valj v mizi pri izhodu. Z orodjem.

Stanje: zelo dobro (rabljeno), Naprodaj opora (steady rest) za stružnico. Profesionalna delavniška oprema za stabilno vodenje dolgih in težkih obdelovancev med obdelavo. Močna lita konstrukcija – maksimalna togost in vzdržljivost. Delovna odprtina pribl. 150 mm (izmerjeno s suvilnikom). Odpirajoč okvir – hitro in udobno vpenjanje obdelovanca. Nastavljivi čepi z drsnimi konicami. Priprava za pritrditev na ležišče stružnice preko osnove z odprtino. Podpira je namenjena struženju gredi, cevi, palic in drugih dolgih elementov, ki zahtevajo oporo med obdelavo. Lodpfsw Sfpyox Adlohg

Stanje: zelo dobro (rabljeno), Na prodaju je profesionalni mjerni set japanske tvrtke Mitutoyo, model SBM-25CXST (kat. br. 568-925). Set je namijenjen za precizno mjerenje promjera otvora i cilindričnih elemenata u rasponu od 12 do 25 mm. Sadržaj seta: digitalni unutarnji mikrometar Mitutoyo ABSOLUTE Digimatic s LCD zaslonom, tri mjerne glave: 12–16 mm, 16–20 mm, 20–25 mm, podešavajući prsteni: Mitutoyo 19,997 mm i HK66 19,001 mm, produžeci i dodatna oprema, originalna drvena kutija Mitutoyo s prilagođenom pjenom. ABSOLUTE sustav jamči stabilna mjerenja bez potrebe za ponovnim postavljanjem nule pri svakom uključivanju. Digitalno očitanje omogućuje brza i pouzdana mjerenja visoke točnosti. Set je u vrlo dobrom stanju, kompletan i spreman za rad. Idealan je za mjeriteljske laboratorije, odjele kontrole kvalitete i alatničke radionice. Ledpfx Adjw R E Hvelshg

Stanje: zelo dobro (rabljeno), Stroj za presejanje in sortiranje sipkih materialov ali drobnih kovinskih elementov. Zelo dobro ohranjen – popoln, z originalnim pogonom, krmilno omaro in kompletom kalibracijskih sit. • Proizvajalec: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Leto izdelave: 1972 • Pogon: motor Bauknecht 0,55 kW, 380/220 V, 2850 vrt/min • Krmilna omara: Carl Kurt Walther GmbH, Wuppertal • Jeklena konstrukcija, stabilen okvir s transportnimi kolesci • Trifazno napajanje 400 V • Komplet presejalnih sit v lesenih okvirjih (številke 1–6) • Velikost mrež sit: od 2 mm do 15 mm • Možnost prilagoditve in zamenjave sit • Glavno stikalo, upravljanje start/stop in zaščita pred preobremenitvijo • Zelo dobro stanje – po demontaži iz obrata, mehansko brezhiben Stroj je pripravljen za delo po osnovnem pregledu. Idealno za: kovinske obrate, livarne, industrijske laboratorije, sortiranje granulata, peska ali drobnih delov. Lodpexmt Eqefx Adljhg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, obratovalne ure: 11.652 h, nosilnost: 2.000 kg, dvižna višina: 2.010 mm, težišče tovora: 600 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 1.750 mm, dolžina vilic: 1.150 mm, lastna masa: 980 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION Our forklifts are technically reconditioned in accordance with FEM-4.004 and up-to-date safety standards – ensuring maximum quality and your safety. From chassis to battery, including drive, brakes, steering, and electrics – every machine is thoroughly inspected and serviced. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Visit us to test and receive consultation – we'll find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Model: High-Lift Pallet Truck ERD 220 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2018 Operating hours: 11,652 Lift height: 2,010 mm Mast type: Duplex Initial lift: Yes Overall height: 1,750 mm Lhsdpey Rnv Usfx Adljg Fork length: 1,150 mm Unladen weight: 980 kg Load center: 600 mm Tyres: Polyurethane Model variant: ERD 220 Battery type: PzS

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) Lhodpfx Aomhhypjdlog - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Lhsdemhh Dhepfx Adlsg Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. Lodpfx Adomhh Dzslshg The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) Lhsdpomhhx Iofx Adleg - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg Lhodpfsmhhyaox Adlsg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Lhsdpfxoh Ek Das Adljg - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.