Mitsubishi Indeksni Vložki - Rezkalnik Za Obraz nakup rabljenega (85.610)

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), Face milling cutter with indexable inserts Manufacturer: Mitsubishi Type: AHX 640 W 160 C 22 R Multicorner Dsdpfx Ajfc Tq Ejb Hokn Face mill designed for high feed rates For 22 heptagonal inserts Cutter diameter: 160 mm

Leto izdelave: 2016, stanje: kot nova (razstavni stroj), Face milling cutter Cutter head Manufacturer: Mitsubishi Dsdpfx Asfmch Ijb Hjkn Type: AHX 640 W-315 CA28 R Diameter: 315 mm Weight: 31 kg

Stanje: rabljeno, Funkcionalnost: nepreverjeno, moč: 27,38 kW (37,23 KM), vrsta prenosa: hidrostat, vrsta goriva: bencin, skupna masa: 670 kg, konfiguracija osi: 2 osi, Leto izdelave: 2008, obratovalne ure: 69 h, Stump Grinder LASKI F-500 H / 37 HP, year of manufacture 2008. The machine was first put into operation in 10/2010. Twin-axle stump grinder with Kohler engine (installed 05/2021), four-stroke petrol injection engine with 37 HP output and hydrostatic drive on the front axle. Grinding depth below ground level up to 380mm. Grinding wheel with 18 Laski teeth, diameter including teeth 510mm. Optional grinding wheel with 6 Multitip teeth. Grinding wheel is driven via multi-V belt drive and electro-magnetic clutch. Tyres: 4 narrow / 4 wide. Weight approx. 670 kg fully fueled. A new engine was installed in 05/2021 (currently with 69 operating hours). Original engine had approx. 260 operating hours. Due to a seized piston (my fault – forgot to refill oil), a new engine was fitted in 05/2021. Runs smoothly and is ready for use. Last service (air filter, oil and filter change): 11/2025. Last operation of grinder: 08/2025. The machine is stored in a hall in 90762 Fürth and is available for inspection and testing by appointment. Accessories: - Large quantity of original Laski cutter teeth (used) Dksdpfjzb H Szox Ab Hon - 2 stainless steel ramps, each 250 cm (load capacity per ramp: 500 kg) - 2 large petrol cans - 1 grease gun (new) + grease nipples (new) - 1 diamond grinding disc for angle grinder (for sharpening the cutter teeth) - 1 grinding wheel for 6 Multitip cutter teeth Important Notice! Due to the new legal regulations, the sale is made under exclusion of any warranty, guarantee, and return rights. Sold as seen! The sale is made with exclusion of any liability for material defects!! Liability for damages to health, body, or life, and for gross negligence and/or intentional breach of duty remains unaffected! The grinder, including accessories, is sold as a donor for spare parts! As this is a private sale, I cannot offer any guarantee. By purchasing, the buyer agrees to and accepts these terms. If you have any questions or need more information, please feel free to send us a message.

Stanje: novo, Leto izdelave: 2025, Dimensions and Weights Length approx.: 2000 mm Width/Depth approx.: 1110 mm Weight approx.: 430 kg Jointer Infeed Table Length: 1034 mm Maximum Cutting Depth: 5 mm Dust Extraction Connection Diameter of Thicknessing Extraction Ports: 2 x 120 mm Thickness Planer Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Cutting Depth: 5 mm Electrical Data Main Drive Motor Power: 5 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min The TERSA cutterhead system ensures particularly quiet operation. Helically serrated steel infeed roller for consistent and even material feed Material feed with two selectable speeds Numerical digital readout for thickness table height The 2,000 mm long jointer tables allow easy jointing of large workpieces. Worktables are made of cast iron, annealed and stress-relieved, ensuring durability and long-term flatness Robust, large aluminium fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical digital height display The high machine weight provides maximum precision and smooth operation. Powerful industrial motor Sturdy steel/cast-iron construction Feature Details Jointer Fence Sturdy, large jointer fence made of aluminium (1200 x 160 mm) with precise round bar guidance Dust Extraction Hose Connection The extraction ports for jointer and thickness planer are both oriented in the same direction, allowing the extraction hose to be connected to both planing modes from one side of the machine. No need for a hose to run around the machine. Cutterhead Assembly Helically serrated steel infeed rollers for consistent and even material feed Heavy-duty anti-kickback fingers to prevent workpiece kickback 4-knife cutterblock ensures an optimal planed finish Chain Drive Robustly designed chain drive Drive sprockets made of steel Massive cast iron bearing blocks Two Feed Speeds Standard with two feed speeds, conveniently selectable from the machine’s operator side Material Feed Helically serrated steel infeed rollers ensure consistent and even material feeding without indentations Multiple teeth engage at the same time for powerful feeding Maintenance-free compared to rubber feed rollers Thickness Table Adjustment Dodpehkz E Tofx Ab Hokn Adjustment via handwheel Numerical digital display of planing height Accurate to 1/10 mm Tersa Cutterblock No setting or screwing required Knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Leto izdelave: 1996, stanje: rabljeno, Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vice clamping width: 100 mm Dkedpjq Awg Esfx Ab Hsn Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed via foot switch activation Profile clamping via steplessly swiveling vice.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Various used rack cutters / rack milling cutter groups from different manufacturers Manufacturer: Arnold Dold GmbH & Co. KG 32 pcs. rack milling cutters available Module 0.5 – group cutter Module 0.7 – group cutter Module 0.9 – TiN coating Module 1 – 2 pcs. available – group cutter Module 1.25 – group cutter Module 1.5 – TiN coating Module 1.75 – group cutter Module 2 – 4-flute – one damaged spot Module 2 – TiN coating Module 2.5 – 8-flute – one damaged spot Module 3 – reground Module 3 – 7-flute – one damaged spot Module 3 – 7-flute – reground – BPIII – Ü Module 3 – TiN coating Module 5 – 4-flute – reground Module 5 – 4-flute – TiN coating Module 6 – 3-flute – TiN coating Module 6 – 3-flute – TiN coating – reground Module 7 – 3-flute – reground Module 8 – 3-flute – reground Module 10 – TiN coating Module 10 – reground – finishing cutter Module 12 – TiN coating – finishing cutter Module 12 – one damaged spot Module 13 – finishing cutter Module 14 – reground Module 16 – reground Pressure angle: 20° BPII-Ü Bore diameter [mm]: 40; 50 Keyway [mm]: 10; 12 Width [mm]: 32.5; 45.5; 44; 17/21; 16/20; 14/18; 21/25; 18/22; 65/73; 48/57; 31; 66/72; 69/77; 70/78; 60/64; 60/66; 82; 72/80; 82; 40; 39; 47; 52; 56; 64 Outside diameter [mm]: 169; 140; 141; 200; 150; 198; 195; 199; 197; 201; 200; 219; 192; 191 Manufacturer: Saazor – Wälztechnik ZORN GmbH & Co. KG 7 pcs. rack milling cutters available Module 1 – 16-flute – TiN coated – one damaged spot Module 1.5 – 9-flute group cutter, 9 teeth per row; 2 – tangential cutter; 6 – tangential cutter; Module 10 – TiN coating Pressure angle: 20° DIN 3972 II – Ü or DIN 3972 II Cl. A – Ü Bore diameter [mm]: 40 Keyway [mm]: 10 Width [mm]: 52/60; 55/85; 60/90; 33/40 Outside diameter [mm]: 176; 200; 198; 199 Dkedpfoytrh Esx Ab Hsn Manufacturer: Klingelnberg – 6 pcs. rack milling cutters available Module 2.5; 2.75; 3.25; 3.75; 4.5 Pressure angle: 20° Bore diameter [mm]: 40 Keyway [mm]: 10 Width [mm]: 30/38; 28/36; 35/42; 39/47; 44/52 Outside diameter [mm]: 148; 149; 150 All technical details subject to typing errors/mistakes. Price on request Sale exclusively to countries within the EU.

Stanje: zelo dobro (rabljeno), Na prodaj profesionalni posnemovalec/ukosevalnik za pločevino TRUMPF TruTool TKA 500 (1A1). Stroj je namenjen izdelavi posnetij za varjenje in obdelavi robov jeklenih pločevin. Rabljeno, tehnično brezhibno, običajni sledovi uporabe so vidni na fotografijah. Industrijski razred – izdelava Švica/Nemčija. Tehnični podatki Moč 1.400 W Napajanje 230 V / 50–60 Hz Tok 6,5 A Model TruTool TKA 500 (1A1) Leto izdelave 2009 Proizvajalec TRUMPF Uporaba Posnemanje robov pločevine pred varjenjem Poševno rezanje za V- in X-zvare Obdelava konstrukcijskega in strojegradbenega jekla Delavnice, proizvodnja, jeklene konstrukcije Dodpfxeyhnukj Ab Hskn V kompletu Posnemovalec TRUMPF TruTool TKA 500 Originalni transportni kovček TRUMPF Dokumentacija/navodila proizvajalca Pribor, viden na fotografijah Naprava pripravljena za delo. Možnost preizkusa na mestu. Pošiljanje ali osebni prevzem – po dogovoru.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za rezkanje ključavnic vrat SL 100 - z rezkalnimi motorji za čelno ploščo in kljuko - s pnevmatskimi vpenjalniki - 1,7 kW Djdpoygm Awofx Ab Hjkn Prevoz je mogoč za doplačilo! Zaradi starosti rabljenega stroja je pri prodaji poslovnim strankam izključena garancija.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2001, I am selling an automatic CNC machining center for BLOCK-HOUSE production, AUER BL100. Year of manufacture: 2001. Infeed table / Max. element length: 9.00m Djdpfx Ajrccakob Hskn Tenoning cutter up to dia. 200mm / 4kW Horizontal milling cutter up to dia. 200mm / 4kW Vertical milling cutter up to dia. 200mm / 4kW Automatic feed system AUER Austria BL100MS programming Zebra label printer TOS Svitavy PWM 45.11 end-cut saw at the rear Ideal for timber construction! Available immediately.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 3 vložki za Multifix, velikost C, Dodey Hf Awepfx Ab Hokn

Stanje: zelo dobro (rabljeno), Face driver Diameter: 250 mm Clamping range: 120 - 200 mm Maximum rotational speed: 3500 rpm Weight: 30 kg Dkedpfx Absf Dx Skj Hjn

Stanje: zelo dobro (rabljeno), various lathe chucks and faceplates as shown Dksdpfxofr T N Ue Ab Hen

Stanje: dober (rabljeno), Leto izdelave: 1980, Dolžina reza 3100 mm Višina reza 45 mm Moč motorja 1,8 kW Teža stroja cca 500 kg - pnevmatska pritrdilna prečka - odlagalna miza za furnir - paralelni prislon s 6 podajalnimi prsti - naprava za izsesavanje odrezkov Dedpfx Absyku U No Hekn

Leto izdelave: 2007, stanje: rabljeno, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). SIMEX TF 800 Rock Cutter / Milling Attachment / Tunnel Cutter / incl. Liebherr SW48 Adapter Plate / Year of manufacture: 2007 / In stock & immediately available Price: €13,890.00 net / €16,529.10 gross Drum width: 800 mm Milling speed: 75 - 115 rpm Hydraulic motor power: 61 (83) kW (HP) Required oil flow: 105 - 190 l/min Required oil pressure: 350 - 200 BAR Max. vertical force: 31.8 kN Operating weight (standard drum): 1,035 kg Recommended excavator weight: 14 - 22 tons Equipment: - incl. Liebherr SW48 adapter plate We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a very large selection of different attachments available in our warehouse for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. Upon request, we are happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. Dedpfx Asyxagneb Hekn We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 310390 = Further information = Unladen weight: 1,035 kg Please contact Marius Herden for further information.

Stanje: skoraj kot novo (rabljeno), Various infeed timbers for Maweg glue star Different dimensions, mostly unused. Made from laminated oak Dksdpfx Absfl Ikkj Hon

Stanje: dober (rabljeno), Leto izdelave: 2000, Zum Verkauf: AXYZ 4010 CNC-Fräse (Baujahr 2000) – Hergestellt in Kanada, zuverlässig & vielseitig Wir bieten eine gebrauchte AXYZ 4010 CNC-Fräse, Baujahr 2000, hergestellt in Kanada, zum Verkauf an. Diese CNC-Fräse ist bekannt für ihre Langlebigkeit, Präzision und Vielseitigkeit und eignet sich ideal für verschiedene Schneid-, Gravur- und Fräsanwendungen. Die Maschine wurde regelmäßig gewartet und befindet sich in einem guten, voll funktionsfähigen Zustand – eine kosteneffiziente Wahl für Unternehmen, die ihre Bearbeitungsmöglichkeiten erweitern möchten. Dkodpjvzaguefx Ab Hjn Technische Daten & Ausstattung: Arbeitsbereich: 1220 mm x 2540 mm (48" x 100") Tisch: Vakuumtisch Spindeltyp: 2x Hochgeschwindigkeits-Frässpindeln Steuerung: AXYZ eigene CNC-Steuerung Antriebssystem: Schrittmotorantrieb für präzise Bewegungen Materialverträglichkeit: Geeignet zum Bearbeiten von Holz, Kunststoffen, Aluminium, Verbundwerkstoffen und mehr Softwarekompatibilität: Kompatibel mit gängiger CAD/CAM-Software Hergestellt in: Kanada Zustand: Gebraucht, in gutem, funktionsfähigen Zustand Ihre Vorteile: Kanadische Qualität: Gefertigt nach hohen Industriestandards für Zuverlässigkeit und lange Lebensdauer. Präzision & Effizienz: Für präzise Fräs- und Gravurarbeiten mit hoher Genauigkeit ausgelegt. Vielseitige Einsatzmöglichkeiten: Ideal für Beschriftungen, Holzverarbeitung, Prototypenbau und leichte Metallbearbeitung. Kosteneffiziente Investition: Preiswerte Alternative zur Anschaffung einer neuen CNC-Fräse. Die AXYZ 4010 CNC-Fräse ist die perfekte Ergänzung für Werkstätten, Schildermacher und Metall- oder Holzverarbeitungsbetriebe, die zuverlässige Maschinen zu einem attraktiven Preis suchen.

Stanje: dober (rabljeno), Obojestranske ploščice za rezkanje lesa, nožne ploščice, oblikovne rezkalne ploščice -Širina rezila: 39 mm -Debeljina rezila: 2 mm Djdpfx Abeb A Sucj Hokn -Polmer: 15 mm -Cena/prodaja: komplet -Teža: 0,9 kg

Stanje: dober (rabljeno), Carbide insert knives for wood milling, profile cutter knives, and form cutter inserts - Knife width: 39 mm - Knife thickness: 2 mm - Radius: 7.5 mm Dsdeb A Subspfx Ab Hokn - Price: complete set - Weight: 0.8 kg

Stanje: dober (rabljeno), Wood cutter reversible plates, knife inserts, profile cutter inserts Dkedpjb A Sugsfx Ab Hon - Knife width: 40 mm - Knife thickness: 2 mm - Price: complete set - Weight: 0.3 kg

Stanje: delavnici obnovljeno (rabljeno), Popolnoma obnovljen podajalni sistem za tračno žago v odličnem stanju Dkodpfxohpyako Ab Hen

Stanje: pripravljen za uporabo (rabljen), Mitsubishi / Mazak FX 231D BN624A550G52 card, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos Dkjdpfxei Eb Ezo Ab Hsn

Stanje: pripravljen za uporabo (rabljen), Mitsubishi FX01B BN624A236H05 card, used, normal signs of wear, 100% functional Djdpfxoi Eb H As Ab Hekn

Stanje: pripravljen za uporabo (rabljen), Mitsubishi / Mazak FX31C BN624A377 board, used, normal signs of wear, 100% functional Dkedpji Eb H Ujfx Ab Hsn

Stanje: pripravljen za uporabo (rabljen), Mitsubishi / Mazak FX 53A BN624A240H05 card, used, normal signs of wear, 100% functional, scope of delivery as per photos Dkjdpfx Asi Eb E Tjb Hjn

Stanje: pripravljen za uporabo (rabljen), Mitsubishi / Mazak FX25A BN624A189H01 card, used, normal signs of wear, 100% functional Dksdei Eb H Rjpfx Ab Hon