Microstep Microcut-P 3001.15Pme nakup rabljenega (40.988)

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 403/05, dolžina mize: 3.000 mm, moč servomotorja: 1.500 W, širina mize: 1.500 mm, Oprema: dvostranski, S sistemom za plazemsko rezanje HyperTherm Powermax 1100 in sušilnikom zraka M.T.A. DE009. Stroj je bil uporabljen za izdelavo prezračevalnih kanalov in spojnih elementov. Vključuje posebne programe za upravljanje stroja in izdelavo detajlov za prezračevalne proizvode: - AsperWin (osnovni program za upravljanje CNC stroja za Windows. Možen je uvoz dxf datotek), Dcsdsw I D Iaepfx Apleg - Asper Nesting (omogoča učinkovito razporeditev velikega števila različnih rezanih kosov za najboljšo možno izrabo materiala z minimalnimi odpadki), - Air Select (za proizvajalce kanalov omogoča hitro in udobno načrtovanje HVAC komponent).

Stanje: dober (rabljeno), Leto izdelave: 2007, CNC portalna plazemska rezalna naprava Proizvajalec: Microstep Tip: SPL-P 12001.20 Leto izdelave: 2007 CNC upravljanje 1 plazemski rezalnik z napajalnikom Kjellberg HiFocus 160i Dsdpfxouv Hkgs Aplocg Sesalna miza: 2 x 12 m Filtrirna naprava Donaldson Torit DCE

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2202, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodni tok: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control: IMSNC Oxyfuel cutting table: 3000 x 1500 mm Extraction duct left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions via soft-switch inverter and microprocessor control Dcedpfoy Nd Hysx Aplog • Optimal process management through extremely fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition and power source • Operating status and error indication via LED and display • Analog and serial interface for CNC control integration • Stepless adjustment of cutting current from 10 - 160 A and for marking from 5 - 25 A • Optimal piercing thanks to stepless delay for main arc and adjustable current ramp-up • Adjustable current reduction for corners, start, and end signals of the guidance system • Automatic display of preset cutting current • Serial data transfer for diagnostic purposes on PC Plasma Cutting Technology Contour Cut • Advancement of HiFocus technology for mild steel • Optimized for cutting fine inner and outer contours • High cut quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 in the range of 2-4 • Minimal angular deviation and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No time-consuming reworking – high productivity and low costs • No additional equipment, software, or new consumables needed • Standard equipment Plasma Torch PerCut 200/210 • PerCut 200 plasma machine torch for standard and high-precision bevel cutting • PerCut 210 quick-change torch with threaded lock for fast and convenient fitting • Special torches available for special applications • Higher cutting speeds reduce cost per cut meter • Long service life of consumables saves resources • Narrower kerf, resulting in less emissions and waste • Significantly lower gas consumption compared to competitors due to efficient liquid cooling to the nozzle tip • Lower noise level thanks to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking with the same consumables Power Source HiFocus 161i Mains connection: 400 V; 3-phase; 50 Hz Max. connected load: 28 kVA (100% duty cycle) Main fuse, slow: 50 A Protection class: IP 22 Open-circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: - Maximum: 50 mm - Recommended: 0.5 – 38 mm Maximum piercing thickness: 30 mm Weight: 206 kg Plasma Machine Torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, proizvajalec krmilnikov: MicroStep, model krmilnika: iMSNC, število osi: 3, This 3-axis plasma cutting machine MicroStep 3001.15P/ME was manufactured in 2021. It offers a working area of 1500x3000 mm, making it ideal for precise and large-scale cutting tasks. If you are looking for high-quality cutting capabilities, you should consider the MicroStep 3001.15P/ME machine, which we have available for sale. Please contact us for further information. • Working area: 1500 x 3000 mm • Permissible sheet thickness: robust design for material thickness up to 100 mm • Guides/drives: high-quality linear guides and backlash-free dual-sided drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic core gas console • Table surface: slatted cover on the cutting table • Height control: "THC" module for automatic height adjustment via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: dual-sided rope safety system (collision protection) for the gantry with emergency stop Dcodpfjycvq Asx Aplsg • Optical signaling: 2-color LED signal tower on the gantry crossbeam • Operator interface: externally mounted MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Stanje: rabljeno, Leto izdelave: 2024, CNC plazemski rezalni stroj Proizvajalec: Microstep Tip: MasterCut Compact 3001.15P Leto izdelave: 2024 Delovno območje: 1.500 x 3.000 mm 1 x plazemski gorilnik z virom Kjellberg Q1500 in Dcsdpfx Apjytqmmolsg avtomatsko plinsko konzolo O² (O², N²) 1 x filtrirni sistem TEKA za zunanjo postavitev 1 x program za gnezdenje na krmilniku stroja Razpoložljivost: takoj

Stanje: rabljeno, Leto izdelave: 2019, CNC portalni plazemski rezalni stroj Proizvajalec: Microstep Tip: MG 4501.20 BkP Letnik: 2019 CNC krmiljenje Delovno območje: 2.000 x 4.500 mm 1 x 2D plazemski gorilnik z napajalnikom Hypertherm XPR300, vključno z Optimix plinsko konzolo 1 x vrtalno vreteno 26 kW do premera 40 mm, vključno z 8-pozicijskim menjalcem orodja 1 x priprava za naknadno vgradnjo rotatorja (za poševne reze) 1 x program za razporejanje na CNC krmiljenju Dedsyay H Aepfx Aplecg ä5526 Razpoložljivost: maj 2026

Stanje: rabljeno, Leto izdelave: 2019, CNC portalni plazemski rezalni stroj Dcodpfx Apjxnmbnjlsg Proizvajalec: Microstep Tip: MasterCut Compact 4001.20Ptk Letnik izdelave: 2019 CNC krmiljenje Delovno območje: 2 x 4 m Plazemski rotator „MasterCut“ s popolnoma avtomatsko podporo za pripravo varilnih spojev 1 plazemski gorilnik z napajalnikom Kjellberg HiFocus 280i Filtrirna naprava TEKA št. ä5526

Stanje: dober (rabljeno), Leto izdelave: 2012, CNC portalni plazemski rezalnik Dodeu U Hm Aopfx Aplocg Proizvajalec: Microstep Tip: SPL PAA 9001.25 Leto izdelave: 2012 CNC krmiljenje Delovno območje: 2.500 x 9.000 mm 1 plazemska gorilnika z napajalnim virom Kjellberg HiFocus 280i 2 avtogena gorilnika za propan Nihajna vibracijska miza Beuting Filtrirna naprava Donaldson DFPRO12 za zunanjo namestitev 5526ä

Stanje: dober (rabljeno), Leto izdelave: 2011, CNC Gantry Flame Cutting Machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Exhaust table 1 oxy-fuel torch Cutting thickness up to 150 mm 1 Kjellberg plasma marking unit Laser pointer Technical details in detail: 1x oxy-fuel torch (1 x fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator units mounted on the gantry Laser pointer with automatic offset transmission iMSNC control parameter database / Windows® Programming system “AsperWin-Basic” for direct programming at the machine control Module macro library “AsperWin Select” Module NC simulator “AsperWin NC-Sim” Module “Plasma marking” (for scribing) via plasma source Module “THC” / automatic height control via arc voltage USB 2.0 port for storage media MicroStep® Remote Diagnostics Module “iFDS Win” Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Energy supply lines Gas hoses for heating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylen FIT+ 1 piece capacitive height control IHT / for oxy-fuel 1 piece electric ignition unit RHÖNA-Acetylen Djdpfxsudn Rze Aplecg Double-sided rope safety system (collision protection) for the portal bridge via emergency stop Kjellberg® plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma marking system FineMarker CNC interface for FineMarker / integration into the CNC control Module for automatic activation of the marking device

Stanje: rabljeno, Leto izdelave: 2016, CNC plazemski rezalni stroj Proizvajalec: Microstep Tip: MasterCut Eco (A) Plus Leto izdelave: 2016 CNC upravljanje Delovno območje: 1.500 x 3.000 mm Dcodpfxjy Auxmj Aplsg 1 x plazma z virom energije Kjellberg HiFocus 161i Pripravljeno za naknadno vgradnjo avtogenskega gorilnika Filtrirni sistem Kemper System 8000 s predločevalnikom Program za gnezdenje Asper Basic na CNC krmilniku ä16426

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, delovno območje: 9.000 mm, najv. debelina pločevine: 100 mm, skupna masa: 1.100 kg, vhodna napetost: 400 V, skupna širina: 3.500 mm, rezalni tok: 154 A, vhodna frekvenca: 50 Hz, Ponujamo ta rabljeni MicroStep 9001.35P plazemski rezalni stroj, letnik 2020. Tip: MasterCut Model: 9001.35P Serijska št.: 2815 Leto izdelave: 2020 Nazivni tok: 154 A Kratkostični tok: 6 kA Teža: 1100 kg Dcjdpfjyu Hkwjx Apleg IP zaščita: 43/20 Napajanje: 3L+N+PE AC 400/230V, 50Hz Če imate dodatna vprašanja ali potrebujete več informacij, nam prosim pošljite sporočilo ali nas pokličite.

Stanje: dober (rabljeno), MicroStep SPL-PA Plazemski rezalni stroj z odsesovalno in kompresorsko tehniko Proizvajalec: MicroStep Group Model: SPL-PA 4501.15+S50 Tip stroja: CNC plazemski rezalni stroj CNC krmiljenje: iMSNC Izvedba: portalna konstrukcija z linearnimi vodili Dodpfx Aoyvd Uijpljcg Odsesovalna naprava: Donaldson Torit DCE Električni priključek odsesovalne naprave: 400 V Moč motorja odsesovalca: 7,5 kW Proizvodnja stisnjenega zraka: vijačni kompresor Proizvajalec kompresorja: Kaeser Model kompresorja: TA 8 CE oznaka: prisotna Lokacija: Waltenhofen, Nemčija Demontaža in nakladanje s strani prodajalca vključena.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Ta MicroStep EasyCut 6001.25PrGB je bila izdelana leta 2011. Gre za CNC plazemski/oksigazni rezalni stroj, namenjen za industrijsko, težko uporabo. Ima veliko delovno površino 6000 × 2500 mm, mostovni portal z dvojnim pogonom ter združljivost s CAM programsko opremo kot sta mCAM in AsperWin. Podpira do 6 oksigaznih gorilnikov in ponuja možnosti, kot je samodejna kontrola višine. Opomba: plinska konzola je v okvari. Za več informacij o stroju nas kontaktirajte. Vrste uporabe: Dcsdpfx Apsx D Hz Heleg Rezanje

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Microstep Mastercut Eco Plus 3001.15, Year of manufacture: 2016, Control: IMSNC, Cutting table: 3000 x 1500 mm, Extraction channel left/right, Plasma source: Kjellberg Hi Focus 161i, adjustable 10 - 160 A, Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions through soft-switch inverter and microprocessor control • Optimal process control via rapid regulation of cutting current • Monitoring of process parameters such as torch cooling, ignition time, pilot arc duration, and short-circuit time at torch and power source • Operating status and fault indication via LED and display • Analog and serial interface for connection to CNC controllers • Stepless cutting current adjustment from 10 - 160 A, and for marking 5 - 25 A • Optimal piercing through stepless main arc delay and adjustable current ramping • Adjustable current reduction for corner, start, and end signals from the guiding system • Automatic display of preset cutting current • Serial data transfer for PC diagnostics Plasma Cutting Technology Contour Cut • Advanced HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cut quality and contour accuracy • Holes with angular deviation according to DIN EN ISO 9013 in range 2-4 • Low angular deviation and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No time-consuming post-processing – high productivity and low cost • No additional equipment, software or new consumables required • Standard as default Plasma Torch PerCut 200/210 • PerCut 200 plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded cap for fast and convenient setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf reduces emissions and waste • Significantly lower gas consumption compared to competitors due to efficient liquid cooling to the tip • Lower noise due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power Source: HiFocus 161i Mains supply: 400 V; 3 Ph; 50 Hz Max. connected load: 28 kVA (100% duty cycle) Dedpfxeyzy S Aj Apljcg Line fuse, slow blow: 50 A Protection class: IP 22 Open-circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range 50 mm max. 0.5 – 38 mm recommended Max. piercing thickness: 30 mm Weight: 206 kg Plasma torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 11.500 h, številka stroja/vozila: 3098, laserske ure: 6.900 h, laserska moč: 10.000 W, najv. debelina pločevine: 30 mm, najv. debelina jeklene pločevine: 30 mm, moč: 10 kW (13,60 KM), leto zadnje generalne obnove: 2024, delovno območje: 4.020 mm, Oprema: dokumentacija / priročnik, hladilna enota, varnostna svetlobna zapora, MSF Pro 4001.20LB MicroStep CNC Cutting System of the MSF Pro series featuring: • 2D laser cutting head with IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic drilling spindle HSK 63 • High-performance Donaldson DFPRO 6 filtration system with 7.5 kW Technical Data: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Dcjdpfx Aovw Tdlspleg Z-axis acceleration: 0.75 G Positioning accuracy (Pa*): 0.07 mm as per VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm as per VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Laser cutting head EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical Data: Drilling range: Ø 4 mm - Ø 30 mm Tapping range: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Speed: up to 10,000 rpm Tool cooling: internal cooling Tool changer: automatic Automatic measurement of drilling tools Pneumatic hold-down device Brush for removal of drilling chips Donaldson® filter system DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Airflow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With Witt gas mixer Machine has always been operated with maintenance and support contract

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 11.500 h, številka stroja/vozila: 3098, laserska moč: 10.000 W, najv. debelina pločevine: 30 mm, najv. debelina jeklene pločevine: 30 mm, delovna širina: 2.000 mm, potovalna razdalja osi X: 4.020 mm, pomik po osi Z: 150 mm, Machine overhauled in 2024. TECHNICAL DETAILS Working area: 4,020 mm Processing area: approx. 4,000 x 2,000 mm Max. sheet thickness: 30 mm Max. steel sheet thickness: 30 mm Laser cutting head: EX-TRABEAM® Pro Laser source: IPG YLS 10000 U fiber laser source Laser power: 10,000 W Output: 10 kW (13.60 HP) Traverse speed: up to 100,000 mm/min Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Z-axis acceleration: 0.75 G Drilling Drilling from/to: Ø4 mm – Ø30 mm Holder: HSK-63 Thread cutting from/to: M5 – M20 Max. material thickness: up to 25 mm Output: 21 kW Speed: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Drilling tool measurement: automatic Dcedpjwyaxmofx Apleg MACHINE DETAILS Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90 % Filter system: Donaldson DFPRO 6 Cyclopeel Fan power: 7.5 kW Air volume flow: 4,500 m³/h Mechanics and control Drives: maintenance-free Panasonic AC servo motors Measuring system: IRC 2500 (incremental encoder) Hold-down device: pneumatic Chip brush: available Laser hours: 6,900 h EQUIPMENT Documentation/manual Cooling unit Safety light barrier Fully automatic shuttle table Fully automatic HSK 63 drilling spindle LU3K cleaning and calibration station Automatic nozzle changer with 8 nozzles Donaldson® DFPRO 6 Cyclopeel filtration system Asper Nesting® automatic nesting software Witt gas mixer Maintenance and support contract

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč plazemski rezalni stroj v zelo dobrem stanju. MicroStep PLS 7501.25PG Opremljen z dvema gorilnikoma: plazma in plin. Vir napajanja: Hypertherm, HyPerformance Plasma HPR260. Reže črno in nerjavno jeklo. Dcodowinpxopfx Aplog Dimenzije mize: 7,5 m x 2,5 m. Stroj je možno pregledati med obratovanjem v Vilni.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Splošni podatki Širina: 4100 mm Globina: 10169 mm Djdpjx D Ey Isfx Aplscg Teža stroja: 5500 kg Krmilna enota Znamka: MicroStep Model: IMSNC Glavni pogon Število osi: 3 Ta triosna plazemska rezalna naprava MicroStep PLS 7501.25PG je bila izdelana leta 2008. Opremljena je z robustnim krmilnim sistemom MicroStep MSNC500 in ponuja dvojno rezanje z HPR 260 AGC plazemskim gorilnikom ter acetilenskim plinskim gorilnikom. Stroj omogoča največjo debelino reza 50 mm in učinkovito deluje na velikem delovnem območju. Če iščete kakovostno rezalno zmogljivost, razmislite o napravi MicroStep PLS 7501.25PG, ki je naprodaj pri nas. Za več informacij nas kontaktirajte. Vrste uporabe Rezanje

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), A nearly new MicroStep CNC plasma cutting system, including a Hypertherm air plasma power source, nesting software, and Aigner filtration unit, is available. 1) MicroStep MasterCut Compact CNC plasma cutting machine, year of manufacture: 2023, working dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, controller: MicroStep iMSNC, operating hours: approx. 2,588h. 2) Hypertherm Powermax 45 XP plasma cutting and gouging unit, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter unit, weight: approx. 500kg. Documentation is available. On-site inspection is possible. Expected to be available from the end of 2025. Dodpfown H Udsx Aplocg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Year of manufacture: 2006 Working area: 6,000 x 2,000 mm Incl. 500 mm pipe channel for pipe and beam processing 1 x Kjellberg HiFocus 160i plasma cutting system with automatic gas console Cutting range for steel up to 30 mm, interchangeable torch head Manufacturer’s data sheet: Kjellberg HiFocus 160i 2 x oxy-fuel cutting torches up to 150 mm Support table, extraction table 2,000 x 6,000 mm Dcjdpfx Aperurraoleg Channel for processing pipes and profiles (without pipe cutting attachment) Complete gas supply with pressure reducer MMI console with 15″ touchscreen Machine control: MicroStep MSNC500® (based on Windows XP) Software: MicroStep CAM AsperWin Basic® Version 3.2 Spare parts and spare parts cabinet for plasma and oxy-fuel torches Filter unit: Donaldson DFPRO 6 with existing supply pipes

Stanje: zelo dobro (rabljeno), Here we offer you a 3DMICROMAC laser marking system. microCUT Enclosure Laser source: IPG Raylase 3-axis scan system Power meter 1 Power meter 2 Camera system for positioning Camera system for quality inspection Chiller Exhaust system Control cabinet with industrial PCs Coolant distribution unit Machine dimensions: Machine weight: 2 tons Width: 922 mm, Depth: 4653 mm, Height: 2925 mm Components: Exhaust system: Height 2869 mm, Width 760 mm, Depth 1577 mm Chiller: Height 1697 mm, Width 1440 mm, Depth 860 mm, Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm, Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current 74A Frequency 50/60Hz Power input 51.3kW Control voltage 24/5VDC Main fuse NH 100A gG Modules: Laser source: Mains voltage 400 VAC, Frequency 50/60Hz, Power 16.7 kW, Current 59A Chiller: Mains voltage 400V, Frequency 50/60Hz, Current 40A Machine operating fluids: Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solids: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Dew point 3°C Consumption < 120 l/min Chilled water cooling module: Chilled water outlet temperature 21°C Chilled water return temperature 26°C Setpoint tolerance 1K Chilled water flow rate 69 l/min Available pump head 1.5 bar DI water cooling module: DI water outlet temperature 26°C DI water return temperature 31°C Setpoint tolerance 1K Flow rate 10 l/min Available pump head 1.5 bar Laser source manufacturer: IPG, Type: YLS-5000, Modes: CW, Quasi-CW Wavelength: 1070nm Power: 5kW Frequency: 5 kHz Scanner manufacturer: Raylase AG, Type: Axialscan-30-Y Field size: 1000x1000 mm Spot diameter: 87 1/e²(µm) Resolution: < 31 µm Working distance: 1198 mm Chiller: Manufacturer Riedel, Type: PC 250.01-NZ-DI-S Refrigerant: R407C 50 Hz Net cooling capacity: 38 kW 60 Hz Net cooling capacity: 40.3 kW Camera system: Manufacturer e2V, Type: AVIIVA TM UM2 GE Quality cameras: Manufacturer e2v, Type: DiViiNA LM1 CL Extraction unit: Manufacturer Donaldson Filtration, Type: DOWNFLO Oval 3-3 Max. fan speed: 3000 rpm Operating pressure: 4.2 bar Dedpfxefgbt Es Aplecg Pulse duration: 100 ms Pressure vessel volume: 92 l Type: Laser Marking System microCUT Condition: used Scope of delivery: (see pictures) (Technical data subject to change. Errors and omissions excepted!) For further questions, we are happy to assist you by phone.

Stanje: pripravljen za uporabo (rabljen), Parker / Compumotor SX83-135 Microstep Drive SN:93090100026, used, normal signs of wear, fully functional, scope of delivery as per photos Dcedjtvct Uspfx Apleg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, najv. debelina pločevine: 38 mm, skupna masa: 3.500 kg, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, TEHNIČNI PODATKI Območje rezanja jekla: 1-38 mm Pomik X-osi: 3.000 mm Pomik Y-osi: 1.500 mm PODROBNOSTI O STROJU Dodpfjx I Ehpsx Aplocg Rezanje medij: HiFocus 161i Krmiljenje: MicroStep Skupna potreba po električni moči: 6 kA Teža stroja: pribl. 3.500 kg OPREMA Plazemski napajalnik Kjellberg HiFocus Plus 161i

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 6.023 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.020 mm, pomik osi Y: 510 mm, pomik po osi Z: 510 mm, največja hitrost vretena: 8.000 obr/min, število osi: 4, TEHNIČNE PODROBNOSTI Pomik osi X: 1.020 mm Pomik osi Y: 510 mm Pomik osi Z: 510 mm Dolžina mize: 1.150 mm Širina mize: 500 mm Orodno vpenjalo: BT40 Djdpfxjy Hh Iio Apljcg Glavna moč vretena: 11 kW Največje število vrtljajev vretena: 8.000 min⁻¹ PODROBNOSTI STROJA Krmiljenje: CNC Število osi: 4 Moč: 15 kW Dimenzije & Teža Dimenzije (D x Š x V): 3.500 x 2.000 x 2.500 mm Lastna teža: 5.000 kg Transportni paketi: 1 Obratovalne ure: 6.023 h OPREMA Transporter za odrezke Zunanje hlajenje Orodni magazin

Stanje: rabljeno, Leto izdelave: 2019, Ta CNC plazemski rezalni stroj MicroStep Master Cut, tip RS, je predmet spletne dražbe na naši industrijski ali strojni dražbi – inventar podjetja ZINK NFZ GmbH & Co. KG. Djdpfx Asy Hqmzepljcg To in številne druge pozicije najdete na naši platformi.