Microstep 9001.35P nakup rabljenega (30)

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, delovno območje: 9.000 mm, najv. debelina pločevine: 100 mm, skupna masa: 1.100 kg, vhodna napetost: 400 V, skupna širina: 3.500 mm, rezalni tok: 154 A, vhodna frekvenca: 50 Hz, Ponujamo ta rabljeni MicroStep 9001.35P plazemski rezalni stroj, letnik 2020. Tip: MasterCut Model: 9001.35P Serijska št.: 2815 Dsdpfeyu Hkwox Apljkl Leto izdelave: 2020 Nazivni tok: 154 A Kratkostični tok: 6 kA Teža: 1100 kg IP zaščita: 43/20 Napajanje: 3L+N+PE AC 400/230V, 50Hz Če imate dodatna vprašanja ali potrebujete več informacij, nam prosim pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2019, Ta CNC plazemski rezalni stroj MicroStep Master Cut, tip RS, je predmet spletne dražbe na naši industrijski ali strojni dražbi – inventar podjetja ZINK NFZ GmbH & Co. KG. Djdpfxey Hqmze Aplokl To in številne druge pozicije najdete na naši platformi.

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2202, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodni tok: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control: IMSNC Oxyfuel cutting table: 3000 x 1500 mm Extraction duct left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions via soft-switch inverter and microprocessor control • Optimal process management through extremely fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition and power source • Operating status and error indication via LED and display • Analog and serial interface for CNC control integration • Stepless adjustment of cutting current from 10 - 160 A and for marking from 5 - 25 A • Optimal piercing thanks to stepless delay for main arc and adjustable current ramp-up • Adjustable current reduction for corners, start, and end signals of the guidance system • Automatic display of preset cutting current • Serial data transfer for diagnostic purposes on PC Plasma Cutting Technology Contour Cut • Advancement of HiFocus technology for mild steel • Optimized for cutting fine inner and outer contours • High cut quality and contour accuracy Dksdpey Nd Hysfx Aplel • Holes with angular deviations according to DIN EN ISO 9013 in the range of 2-4 • Minimal angular deviation and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No time-consuming reworking – high productivity and low costs • No additional equipment, software, or new consumables needed • Standard equipment Plasma Torch PerCut 200/210 • PerCut 200 plasma machine torch for standard and high-precision bevel cutting • PerCut 210 quick-change torch with threaded lock for fast and convenient fitting • Special torches available for special applications • Higher cutting speeds reduce cost per cut meter • Long service life of consumables saves resources • Narrower kerf, resulting in less emissions and waste • Significantly lower gas consumption compared to competitors due to efficient liquid cooling to the nozzle tip • Lower noise level thanks to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking with the same consumables Power Source HiFocus 161i Mains connection: 400 V; 3-phase; 50 Hz Max. connected load: 28 kVA (100% duty cycle) Main fuse, slow: 50 A Protection class: IP 22 Open-circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: - Maximum: 50 mm - Recommended: 0.5 – 38 mm Maximum piercing thickness: 30 mm Weight: 206 kg Plasma Machine Torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Stanje: dober (rabljeno), Leto izdelave: 2007, CNC portalna plazemska rezalna naprava Proizvajalec: Microstep Tip: SPL-P 12001.20 Leto izdelave: 2007 CNC upravljanje 1 plazemski rezalnik z napajalnikom Kjellberg HiFocus 160i Sesalna miza: 2 x 12 m Dkjdpeuv Hkgsfx Apljl Filtrirna naprava Donaldson Torit DCE

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, proizvajalec krmilnikov: MicroStep, model krmilnika: iMSNC, število osi: 3, This 3-axis plasma cutting machine MicroStep 3001.15P/ME was manufactured in 2021. It offers a working area of 1500x3000 mm, making it ideal for precise and large-scale cutting tasks. If you are looking for high-quality cutting capabilities, you should consider the MicroStep 3001.15P/ME machine, which we have available for sale. Please contact us for further information. • Working area: 1500 x 3000 mm • Permissible sheet thickness: robust design for material thickness up to 100 mm Djdpfxeycvq Ao Aplskl • Guides/drives: high-quality linear guides and backlash-free dual-sided drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic core gas console • Table surface: slatted cover on the cutting table • Height control: "THC" module for automatic height adjustment via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: dual-sided rope safety system (collision protection) for the gantry with emergency stop • Optical signaling: 2-color LED signal tower on the gantry crossbeam • Operator interface: externally mounted MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Stanje: rabljeno, Leto izdelave: 2024, CNC plazemski rezalni stroj Dodpfx Apsytqmmslokl Proizvajalec: Microstep Tip: MasterCut Compact 3001.15P Leto izdelave: 2024 Delovno območje: 1.500 x 3.000 mm 1 x plazemski gorilnik z virom Kjellberg Q1500 in avtomatsko plinsko konzolo O² (O², N²) 1 x filtrirni sistem TEKA za zunanjo postavitev 1 x program za gnezdenje na krmilniku stroja Razpoložljivost: takoj

Stanje: rabljeno, Leto izdelave: 2019, CNC portalni plazemski rezalni stroj Proizvajalec: Microstep Tip: MG 4501.20 BkP Letnik: 2019 CNC krmiljenje Dkjdpjyay H Ajfx Aplel Delovno območje: 2.000 x 4.500 mm 1 x 2D plazemski gorilnik z napajalnikom Hypertherm XPR300, vključno z Optimix plinsko konzolo 1 x vrtalno vreteno 26 kW do premera 40 mm, vključno z 8-pozicijskim menjalcem orodja 1 x priprava za naknadno vgradnjo rotatorja (za poševne reze) 1 x program za razporejanje na CNC krmiljenju ä5526 Razpoložljivost: maj 2026

Stanje: rabljeno, Leto izdelave: 2019, CNC portalni plazemski rezalni stroj Proizvajalec: Microstep Tip: MasterCut Compact 4001.20Ptk Letnik izdelave: 2019 CNC krmiljenje Dkjdoxnmbnopfx Aplol Delovno območje: 2 x 4 m Plazemski rotator „MasterCut“ s popolnoma avtomatsko podporo za pripravo varilnih spojev 1 plazemski gorilnik z napajalnikom Kjellberg HiFocus 280i Filtrirna naprava TEKA št. ä5526

Stanje: dober (rabljeno), Leto izdelave: 2012, CNC portalni plazemski rezalnik Proizvajalec: Microstep Tip: SPL PAA 9001.25 Leto izdelave: 2012 CNC krmiljenje Delovno območje: 2.500 x 9.000 mm Dodpfx Apsu U Hm Aolokl 1 plazemska gorilnika z napajalnim virom Kjellberg HiFocus 280i 2 avtogena gorilnika za propan Nihajna vibracijska miza Beuting Filtrirna naprava Donaldson DFPRO12 za zunanjo namestitev 5526ä

Stanje: rabljeno, Leto izdelave: 2012, CNC laserski rezalni stroj Proizvajalec: Microstep Tip: FibreLas MSF 3001.15L Leto izdelave: 2012 CNC krmiljenje: iMSNC Windows Delovne ure laserja cca: 4.000–5.000 Moč laserja: 2,5 kW Delovna površina: 3.000 x 1.500 mm Debelina pločevine jeklo (max.): 15 mm Debelina pločevine nerjavno jeklo (max.): 8 mm Debelina pločevine aluminij (max.): 8 mm Delovna temperatura: +10 do +30 °C in max. 90 % relativna vlažnost (pri 20° C) Izpušni kanal (levo in desno): izhod levo Ø 250 mm Laserski vir: IPG Ytterbium Laser System YLS 2,5 kW Laserski hladilnik LC 170.01-A.3.5 Napetost: 400 V / 3F / 50 Hz Dkedpsx Eh Drjfx Apljl Filter naprava TEKA 4H 5,5 kW Zunanje mere: ca. 10.400 x 3.610 mm

Stanje: dober (rabljeno), Leto izdelave: 2011, CNC Gantry Flame Cutting Machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Exhaust table 1 oxy-fuel torch Cutting thickness up to 150 mm 1 Kjellberg plasma marking unit Laser pointer Technical details in detail: 1x oxy-fuel torch (1 x fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator units mounted on the gantry Laser pointer with automatic offset transmission iMSNC control parameter database / Windows® Programming system “AsperWin-Basic” for direct programming at the machine control Module macro library “AsperWin Select” Module NC simulator “AsperWin NC-Sim” Module “Plasma marking” (for scribing) via plasma source Dedpfx Apjudn Rzjlekl Module “THC” / automatic height control via arc voltage USB 2.0 port for storage media MicroStep® Remote Diagnostics Module “iFDS Win” Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Energy supply lines Gas hoses for heating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylen FIT+ 1 piece capacitive height control IHT / for oxy-fuel 1 piece electric ignition unit RHÖNA-Acetylen Double-sided rope safety system (collision protection) for the portal bridge via emergency stop Kjellberg® plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma marking system FineMarker CNC interface for FineMarker / integration into the CNC control Module for automatic activation of the marking device

Stanje: rabljeno, Leto izdelave: 2016, CNC plazemski rezalni stroj Dksdpfxsy Auxme Aplel Proizvajalec: Microstep Tip: MasterCut Eco (A) Plus Leto izdelave: 2016 CNC upravljanje Delovno območje: 1.500 x 3.000 mm 1 x plazma z virom energije Kjellberg HiFocus 161i Pripravljeno za naknadno vgradnjo avtogenskega gorilnika Filtrirni sistem Kemper System 8000 s predločevalnikom Program za gnezdenje Asper Basic na CNC krmilniku ä16426

Stanje: dober (rabljeno), MicroStep SPL-PA Plazemski rezalni stroj z odsesovalno in kompresorsko tehniko Proizvajalec: MicroStep Group Model: SPL-PA 4501.15+S50 Tip stroja: CNC plazemski rezalni stroj CNC krmiljenje: iMSNC Izvedba: portalna konstrukcija z linearnimi vodili Odsesovalna naprava: Donaldson Torit DCE Električni priključek odsesovalne naprave: 400 V Dodpfx Apjyvd Uiolekl Moč motorja odsesovalca: 7,5 kW Proizvodnja stisnjenega zraka: vijačni kompresor Proizvajalec kompresorja: Kaeser Model kompresorja: TA 8 CE oznaka: prisotna Lokacija: Waltenhofen, Nemčija Demontaža in nakladanje s strani prodajalca vključena.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Ta MicroStep EasyCut 6001.25PrGB je bila izdelana leta 2011. Gre za CNC plazemski/oksigazni rezalni stroj, namenjen za industrijsko, težko uporabo. Ima veliko delovno površino 6000 × 2500 mm, mostovni portal z dvojnim pogonom ter združljivost s CAM programsko opremo kot sta mCAM in AsperWin. Podpira do 6 oksigaznih gorilnikov in ponuja možnosti, kot je samodejna kontrola višine. Opomba: plinska konzola je v okvari. Za več informacij o stroju nas kontaktirajte. Dedpfx Apex D Hz Hsljkl Vrste uporabe: Rezanje

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Microstep Mastercut Eco Plus 3001.15, Year of manufacture: 2016, Control: IMSNC, Cutting table: 3000 x 1500 mm, Extraction channel left/right, Plasma source: Kjellberg Hi Focus 161i, adjustable 10 - 160 A, Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions through soft-switch inverter and microprocessor control • Optimal process control via rapid regulation of cutting current • Monitoring of process parameters such as torch cooling, ignition time, pilot arc duration, and short-circuit time at torch and power source • Operating status and fault indication via LED and display • Analog and serial interface for connection to CNC controllers • Stepless cutting current adjustment from 10 - 160 A, and for marking 5 - 25 A • Optimal piercing through stepless main arc delay and adjustable current ramping • Adjustable current reduction for corner, start, and end signals from the guiding system • Automatic display of preset cutting current • Serial data transfer for PC diagnostics Plasma Cutting Technology Contour Cut • Advanced HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cut quality and contour accuracy • Holes with angular deviation according to DIN EN ISO 9013 in range 2-4 • Low angular deviation and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No time-consuming post-processing – high productivity and low cost • No additional equipment, software or new consumables required • Standard as default Dkedpoyzy S Aofx Apljl Plasma Torch PerCut 200/210 • PerCut 200 plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded cap for fast and convenient setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf reduces emissions and waste • Significantly lower gas consumption compared to competitors due to efficient liquid cooling to the tip • Lower noise due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power Source: HiFocus 161i Mains supply: 400 V; 3 Ph; 50 Hz Max. connected load: 28 kVA (100% duty cycle) Line fuse, slow blow: 50 A Protection class: IP 22 Open-circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range 50 mm max. 0.5 – 38 mm recommended Max. piercing thickness: 30 mm Weight: 206 kg Plasma torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 1.400 h, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, Naprodaj je vodni rezalnik MicroStep WaterCut 2001.30W v odličnem stanju, letnik 2023. Stroj je opremljen z visokotlačno črpalko BFT Ecotron 40.37 – 4000 bar in 37kW, eno izmed najbolj zmogljivih in zanesljivih črpalk na trgu. Dkodpfxey Ecr Hs Apljl Glavne tehnične specifikacije: - Delovno območje: 2000 x 3000 mm - Rezalna glava: 3-osna z antikolizijskim senzorjem - Skupne delovne ure: pribl. 1400 h Stroj se prodaja kot popoln, za uporabo pripravljen paket, vključno z: - 1-tonsko dozirno enoto za abraziv (Allfi) - Avtomatski sistem za odstranjevanje mulja (sistem čiščenja rezervoarja) Ta oprema omogoča takojšen zagon proizvodnje brez dodatnih investicij. Stroj je na voljo takoj.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 11.500 h, številka stroja/vozila: 3098, laserske ure: 6.900 h, laserska moč: 10.000 W, najv. debelina pločevine: 30 mm, najv. debelina jeklene pločevine: 30 mm, moč: 10 kW (13,60 KM), leto zadnje generalne obnove: 2024, delovno območje: 4.020 mm, Oprema: dokumentacija / priročnik, hladilna enota, varnostna svetlobna zapora, MSF Pro 4001.20LB MicroStep CNC Cutting System of the MSF Pro series featuring: • 2D laser cutting head with IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic drilling spindle HSK 63 • High-performance Donaldson DFPRO 6 filtration system with 7.5 kW Dodpfx Apovw Tdlolokl Technical Data: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Z-axis acceleration: 0.75 G Positioning accuracy (Pa*): 0.07 mm as per VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm as per VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Laser cutting head EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical Data: Drilling range: Ø 4 mm - Ø 30 mm Tapping range: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Speed: up to 10,000 rpm Tool cooling: internal cooling Tool changer: automatic Automatic measurement of drilling tools Pneumatic hold-down device Brush for removal of drilling chips Donaldson® filter system DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Airflow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With Witt gas mixer Machine has always been operated with maintenance and support contract

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 11.500 h, številka stroja/vozila: 3098, laserska moč: 10.000 W, najv. debelina pločevine: 30 mm, najv. debelina jeklene pločevine: 30 mm, delovna širina: 2.000 mm, potovalna razdalja osi X: 4.020 mm, pomik po osi Z: 150 mm, Machine overhauled in 2024. TECHNICAL DETAILS Working area: 4,020 mm Processing area: approx. 4,000 x 2,000 mm Max. sheet thickness: 30 mm Max. steel sheet thickness: 30 mm Laser cutting head: EX-TRABEAM® Pro Laser source: IPG YLS 10000 U fiber laser source Laser power: 10,000 W Output: 10 kW (13.60 HP) Traverse speed: up to 100,000 mm/min Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Z-axis acceleration: 0.75 G Drilling Drilling from/to: Ø4 mm – Ø30 mm Holder: HSK-63 Thread cutting from/to: M5 – M20 Max. material thickness: up to 25 mm Output: 21 kW Speed: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Drilling tool measurement: automatic MACHINE DETAILS Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90 % Filter system: Donaldson DFPRO 6 Cyclopeel Fan power: 7.5 kW Air volume flow: 4,500 m³/h Dkedpfxewyaxmj Aplel Mechanics and control Drives: maintenance-free Panasonic AC servo motors Measuring system: IRC 2500 (incremental encoder) Hold-down device: pneumatic Chip brush: available Laser hours: 6,900 h EQUIPMENT Documentation/manual Cooling unit Safety light barrier Fully automatic shuttle table Fully automatic HSK 63 drilling spindle LU3K cleaning and calibration station Automatic nozzle changer with 8 nozzles Donaldson® DFPRO 6 Cyclopeel filtration system Asper Nesting® automatic nesting software Witt gas mixer Maintenance and support contract

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč plazemski rezalni stroj v zelo dobrem stanju. MicroStep PLS 7501.25PG Opremljen z dvema gorilnikoma: plazma in plin. Dedowinpxepfx Aplokl Vir napajanja: Hypertherm, HyPerformance Plasma HPR260. Reže črno in nerjavno jeklo. Dimenzije mize: 7,5 m x 2,5 m. Stroj je možno pregledati med obratovanjem v Vilni.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Splošni podatki Širina: 4100 mm Globina: 10169 mm Teža stroja: 5500 kg Dkodpfex D Ey Iex Apljl Krmilna enota Znamka: MicroStep Model: IMSNC Glavni pogon Število osi: 3 Ta triosna plazemska rezalna naprava MicroStep PLS 7501.25PG je bila izdelana leta 2008. Opremljena je z robustnim krmilnim sistemom MicroStep MSNC500 in ponuja dvojno rezanje z HPR 260 AGC plazemskim gorilnikom ter acetilenskim plinskim gorilnikom. Stroj omogoča največjo debelino reza 50 mm in učinkovito deluje na velikem delovnem območju. Če iščete kakovostno rezalno zmogljivost, razmislite o napravi MicroStep PLS 7501.25PG, ki je naprodaj pri nas. Za več informacij nas kontaktirajte. Vrste uporabe Rezanje

Stanje: rabljeno, MicroStep MG 18001.30 PraG Dkedpfx Ajytga Nsplel Dimenzije: 18.000 x 3.000 mm 1x plazemski rotator: obnovljen leta 2022 1x ravni avtogeni gorilnik Plazemski izvor Hypertherm HPR 260XD Filter enota ni vključena

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), A complete CNC double-gantry plasma cutting system from Microstep with oxy-fuel torch for nesting, bevel cutting, and pipe processing is available. 1) Plasma cutting machine, max. processing length: 16,500 mm, max. processing width: 2,500 mm, max. processing width including channel: 3,700 mm, max. material thickness stainless steel/mild steel: 20 mm/40 mm, number of gantries: 2. Gantry 1: equipped with a plasma rotator and a Kjellberg HiFocus 280i neo plasma power source. Gantry 2: fully automatic acetylene oxy-fuel torch with the option to install a second torch carriage. Pipe cutting device: pipe diameter range: 30 mm–700 mm, max. pipe length: 16,500 mm, operating hours: approx. 15,000 h. 2) Donaldson Cyclopeel DFPRO 16 filtration system, air volume: 16,000 m³/h, filter elements: 16. Documentation available. On-site inspection possible. Expected to be available from late 2025/early 2026. Images are from commissioning in 2014. Dodpfowmqwyox Aplekl

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), A nearly new MicroStep CNC plasma cutting system, including a Hypertherm air plasma power source, nesting software, and Aigner filtration unit, is available. 1) MicroStep MasterCut Compact CNC plasma cutting machine, year of manufacture: 2023, working dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, controller: MicroStep iMSNC, operating hours: approx. 2,588h. 2) Hypertherm Powermax 45 XP plasma cutting and gouging unit, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter unit, weight: approx. 500kg. Documentation is available. On-site inspection is possible. Expected to be available from the end of 2025. Dkedpfxown H Uds Aplol

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Year of manufacture: 2006 Working area: 6,000 x 2,000 mm Incl. 500 mm pipe channel for pipe and beam processing 1 x Kjellberg HiFocus 160i plasma cutting system with automatic gas console Cutting range for steel up to 30 mm, interchangeable torch head Manufacturer’s data sheet: Kjellberg HiFocus 160i 2 x oxy-fuel cutting torches up to 150 mm Support table, extraction table 2,000 x 6,000 mm Channel for processing pipes and profiles (without pipe cutting attachment) Dkjdorurrajpfx Apljl Complete gas supply with pressure reducer MMI console with 15″ touchscreen Machine control: MicroStep MSNC500® (based on Windows XP) Software: MicroStep CAM AsperWin Basic® Version 3.2 Spare parts and spare parts cabinet for plasma and oxy-fuel torches Filter unit: Donaldson DFPRO 6 with existing supply pipes

Leto izdelave: 2018, stanje: rabljeno, x-axis travel 4000 mm y-axis travel 2000 mm z-axis travel mm Waterjet cutter 4000 bar Total power requirement 35 kW Machine weight approx. t Space requirement approx. m² MicroStep CNC Waterjet Cutting System AquaCut-W 4001.20 with the following features: BFT High-Pressure Pump ECOTRON 40.37 Sludge removal system (scraper conveyor) for 4,000 mm length Water softening via water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm) MicroStep machine control with MMI console and 24" touchscreen Two LCD operating units on the gantry Laser pointer with automatic offset transfer iMSNC Module / Expert system iMSNC Module / Assistant for service and maintenance tasks iMSNC Module / Assistant for loading CNC programs iMSNC Module / Automatic calibration of mechanical tactile sensing iMSNC Module / Management of cutting programs (MRP) iMSNC Module / EcoInfo iMSNC Module / MachineInfo iMSNC Module / User management Programming system "AsperWin Basic" for onsite programming directly at the machine controller Module macro library "AsperWin Select" Module NC simulator "AsperWin NC-Sim" 2. USB 3.0 connectivity for storage media 3. MicroStep RemoteDiagnostics remote maintenance module Remote access via TeamViewer 4. Waterjet cutting table with slat support / 4,000 x 2,000 mm working area 5. Automatic height control for the waterjet cutting head 6. BFT high-pressure pump ECOTRON 40.37 7. Automatic pump control 8. Allfi cutting head type IV (1 pc) 9. Allfi abrasive head CENTERLINE type II "Long Life" (1 pc) 10. Allfi abrasive metering system 11. Allfi abrasive feed system type II 12. Automatic abrasive dosing via the CNC controller 13. High-pressure installation material for connecting the high-pressure pump to the existing water network 14. Error messages via SMS through the iMSNC controller 15. GSM modem for the iMSNC controller 16. Double-sided cable safety (collision protection) of the gantry bridge via Dksdpfx Apog N Nlvolol emergency stop 17. Sludge removal system (scraper conveyor) for 4,000 mm length 18. Water stabilization by dosing device and addition of water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming