Mehanska Dvostebrična Vlečna Stiskalnica nakup rabljenega (3.823)

Stanje: novo, Leto izdelave: 2025, Pressure: 1000 t Upright Distance: 4250 mm Stroke: 400 mm Control: SIEMENS S7-1500F Table Dimensions (longitudinal): 4000 mm Table Dimensions (transverse): 1600 mm Total Power Requirement: 200 kW Machine Weight: approx. 250 t Space Requirement: approx. 7.5 x 4.8 x 7.4 m This new FAGOR TSE2-1000-4000-1600 transfer press is available IMMEDIATELY! DESCRIPTION: New transfer press! Stored and has never been installed. COMPLETE with electronic beam transfer 0 – 800 mm transfer stroke and 500–1300 mm distance between transfer beams. Lifting stroke = 0–150 mm. 2 x T-slot sliding tables, extendable. Maximum total tool weight: 20,000 kg, upper part max. 10,000 kg. Ram weight compensation via pneumatic cylinder. Automatic pressure adjustment with setpoint specification from the tool memory. Lubrication: Main bearings, gears are continuously supplied by the recirculating lubrication system. LED tool area lighting. 2 auxiliary control panels, scrap chute baffles, press force measuring device, vibration elements by KTI. Technical Data: Frame design: Transfer press Drive type: Mechanical Side window in frame: Yes Drop-through hole in table: Yes Sliding table: Yes Number of tables: 2 Press Forces Rated press force: 1000 t Press Table Clamping surface (left-right): 4000 mm Clamping surface (front-back): 1600 mm Height above floor: 600 mm automatic tool clamping system: Yes Ram Stroke: 400 mm Ram (mechanical press) Ram adjustability: 300 mm Strokes per minute: min. 8 /min Strokes per minute: max. 50 /min Hydraulic overload protection: Yes Tool Installation Dimensions Die installation height (stroke down, adjustment): 766 mm Distance between uprights (left-right): 4250 mm Free lateral passage (width): 1800 mm Maximum tool weight: 20,000 kg Transfer System Ksdpfxjym D E Aj Al Nolr Gripper rail inside width closed max.: 500 mm Gripper rail inside width open max.: 1300 mm Electrical Connection Data Total power consumption: 200 kW Connected load: 350 kVA Connection voltage: 400 V Mains frequency: 60 Hz Dimensions / Weights Space requirement length: 7500 mm Space requirement width: 4800 mm Height above floor: 7360 mm Height below floor: 4000 mm Total weight: approx. 250,000 kg Additional Equipment for Presses Light curtain: Yes Shear shock damping: Yes automatic tool clamping system: Yes Hydraulic overload protection: Yes Transfer unit: Yes

Stanje: rabljeno, Leto izdelave: 2001, Proizvajalec: SCHULER SMG, Tip: HZPU-T 1000-2500/2100, Leto izdelave: 2001, Serijska št.: 7.5592, Tlačna sila: 1.000 t, Izmenljiva miza: 2.500 x 2.100 mm, Površina bata: 2.500 x 2.100 mm, Največji hod bata: 1.300 mm, Pritisk izvlečne blazine: 30-200 t, Hod izvlečne blazine: 300 mm, Upravljanje stiskalnice z OP Siemens Simatic OP 37, Upravne in krmilne omare Kljdpsx Ry Ntjfx Al Nor +++ Pozor: Stroj je del spletne dražbe! +++

Stanje: rabljeno, Leto izdelave: 1996, Tlak 100 t Iztegnitev 510 mm Hod 600 mm Vgradna višina 1000 mm Površina mize 1025 x 650 mm Sila izvlečnega blazine 25 t Hod izvlečnega blazine 200 mm Površina izvlečnega blazine 600 x 400 mm Višina mize nad tlemi 970 mm Površina bata 1025 x 650 mm Hitrost iztega 350 mm/sek Hitrost vračanja 330 mm/sek Delovna hitrost 30–43 mm/sek Kedovuunmjpfx Al Nolr Količina olja 540 l Skupna električna moč 48,0 kW Teža stroja ca. 12,0 t Prostorske zahteve ca 1,2 x 2,7 x 3,9 m Odobreno za ročno vpenjanje v skladu s CE-normo z oljno hidravličnim pogonom, hidravlična izvlečna blazina v mizi Na voljo video dokončane ‘sestrske’ naprave – z novo krmilno enoto

Stanje: rabljeno, Leto izdelave: 1991, Tlak 63 t Izteg 325 mm Hod 560 mm Vgradna višina 700 mm Površina mize 640 x 640 mm Sila izvlakovega blazine 25 t Hod izvlakovega blazine 200 mm Površina izvlakovega blazine 450 x 450 mm Višina mize nad tlemi 800 mm Površina bata 560 x 560 mm Količina olja 450 l Skupna potrebna moč 15,0 kW Teža stroja cca 7,0 t Potreben prostor cca 1,2 x 2,0 x 3,1 m Leto izdelave 1971 - Generalna obnova 1991 Kledjvuuacepfx Al Ner Dovoljeno za ročno delo v skladu z nemškimi predpisi o varnosti pri delu (UVV) Z olje-hidravličnim pogonom, hidravlično izvlakovim blazino v mizi, dvoročno upravljanje Stiskalnico je možno videti v delovanju v našem skladišču.

Stanje: dober (rabljeno), Leto izdelave: 1995, moč: 22 kW (29,91 KM), stiskalna sila: 120 t, hod: 400 mm, širina mize: 1.250 mm, dolžina mize: 1.000 mm, višina mize: 950 mm, sila umika: 5 t, skupna dolžina: 2.100 mm, skupna širina: 2.050 mm, skupna višina: 3.800 mm, višina krmilne omare: 1.900 mm, dolžina elektro omare: 600 mm, širina krmilne omare: 500 mm, vgradna višina: 900 mm, Oprema: varnostna svetlobna zapora, Hidravlična globokotlačna stiskalnica, pritisk 120 t, hod 400 mm, vgradna višina 900 mm, z oljnim hladilnikom, svetlobna pregrada, dimenzije 2100x2050x3800 mm, cca 13400 kg Klodpfx Aleycin Ue Ner

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ta oglas ponuja hidravlično stiskalnico za vulkanizacijo gume, proizvajalca TERENZIO, model »G« MATRICOLA - N, izdelano leta 1967. Stroj tehta približno 35.000 kg, kar odraža njegovo robustno industrijsko zasnovo, primerno za zahtevne aplikacije pri obdelavi gume. Ta hidravlična stiskalnica je primerna za kupce, ki iščejo težko vulkanizacijsko napravo priznanega italijanskega proizvajalca z dolgoletno tradicijo. Kljdpsyqxm Nsfx Al Nor

Stanje: rabljeno, Single-Column Hydraulic Press with Drawing Cushion RÖCHER Type REP 100.01 SZ Hydraulic Drawing Press Machine No. 15,499 Year of manufacture: 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with through-hole Ø 150 mm Klodpfx Aeyupulol Nor Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tons (400 kN) Drawing cushion stroke: 200 mm Drawing cushion surface: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Max. hydraulic operating pressure: 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Electrical connection: 400 Volt, 50 Hz (63 Amps) - Operation and programming via control panel PC 670 touch panel, keyboard and mouse - Machine control via Siemens S7-300 PLC - Ram stroke and pressing force programmable via the control system - Drawing cushion with drawing and ejector function - Drawing cushion force infinitely adjustable - Ram and drawing cushion fitted with direct travel measurement systems - Drawing cushion can be moved in and out under the press area, for punching operations using the through-hole - Floor-level installation, drawing cushion does not extend into the floor - Pressure and travel shut-off - Fixed stop with indirect measuring system - Pressure holding time infinitely programmable - Table surface with holes for drawing cushion ram rods - Ram with ejector - Cutting stroke damping - Stroke release via two-hand operation, foot switch, hand lever, and push button on the control panel - LEUZE light barrier as reach-in protection in safety mode - Front mirror columns on the press table laterally adjustable - Electrical control cabinet mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose lines for tool temperature control or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirement for the press (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Stanje: novo, stiskalna sila: 200 t, DURENDUS 200 T Deep Drawing Press – DoubleColumn Press – 900 × 900 mm Table, 80 T Drawing Cushion The machine shown here was built and delivered to customer order. We can manufacture this machine for you at short notice – including individual options upon request. This is a hydraulic deep drawing press with an integrated drawing cushion function for forming processes, drawing operations, and precise sheet metal working. Base price: €76,000 net Options (on request): The listed options are based on realized customer projects and enable targeted customization of the machine for the specific application. The basic machine is a functional standard version – in practice, it is usually extended with additional equipment and configured specifically for the project. * T-slots and drill holes according to customer specification * Adjustment of stroke, installation height, and press force range * Extended drawing cushion configuration * Individual control adaptations * Extended safety and monitoring systems ===== Technical Data + Information: ==== General Information * Design: Double-column press * Press force: 40–200 t (adjustable) * Total weight: approx. 5,500 kg * Overall dimensions (W × D × H): 2,370 × 1,300 × 3,300 mm ==== Working Area * Table size: 900 × 900 mm * Ram face: 900 × 900 mm * Installation height: max. 800 mm ==== Table & Ram * Table height: 1,000 mm * Ram stroke: 0–500 mm (adjustable) * Column guide: 4 columns Ø 120 mm ==== Speeds * Pressing speed: 4–10 mm/s * Idle speed: 10 mm/s * Return speed: 16 mm/s * Drawing cushion speed: 20 mm/s ==== Hydraulics & Drive * Operating pressure: max. 260 bar * Pump capacity: 70 l/min Kledpfxoyzf A Ho Al Nor * Servo motor power: 15 kW * Pressure accuracy: ±5 bar * Hydraulic system with air cooling and oil monitoring ==== Control & Operation * Two-hand operation * Operating mode selector switch (key switch) * Operating modes: Setup, manual cycle * Connection: 400 V / 50 Hz * Total connected load: approx. 20 kW ==== Equipment * Drawing cushion: 30–80 t, stroke 200 mm * CE-compliant design * Safety limit switches * Hydraulic interlock * Control cabinet IP54 with branded components (SIEMENS, ALLEN BRADLEY, SICK) * Two-coat paint finish according to RAL ===== Deep drawing, sheet metal forming, forming technology, draw part production, series production, metalworking Deep drawing press, hydraulic press, double-column press, drawing cushion press, forming press, sheet metal press Are you looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are manufactured in accordance with German Machinery Guidelines as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations.

Stanje: rabljeno, Double-column Hydraulic Press NEFF Type RHS 125 Z Hydraulic Drawing Press Kjdjguvtlepfx Al Nelr Machine no. 3973 Year of manufacture: 1983 Pressing force: 125 tons Column spacing: 1,050 mm Lateral column opening: 550 mm Table surface: 1,000 x 800 mm Ram surface: 1,000 x 800 mm Ram stroke: 350 mm Max. installation height: 750 mm Table height above floor: 960 mm Blank holder force: approx. 12 tons at 105 bar Blank holder stroke: 100 mm Table opening diameter: Ø 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid return speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1,000 liters Main pump motor power: 22 kW Control pump motor power: 4 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Hydraulic blank holder under the table with bore through the table plate Ø 202 mm - Precise 4-column guidance system on ram corners - Infinitely variable pressing force adjustment - Adjustable fixed stop, electrically controlled via hydraulic motor - Cutting stroke damping - Two-hand control panel for ram stroke activation on the press - Free-standing control cabinet (1,600 x 500 mm) - Documentation available, including operating manual, electrical diagrams, and PLC program printout Space requirement (L x W x H): 2,600 x 2,400 x 4,270 mm Weight: approx. 14 tons In good condition

Stanje: rabljeno, Single-column eccentric press PELS - RICHTER Type PEKR 125 Machine No. 20684 Year: 1967 Press force: 125 tons Kodpfjfim Thjx Al Njlr Throat depth: 430 mm Table size: 1100 x 750 mm Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height with max. stroke at top: max. 450 mm Clamping shank bore: Ø 50 mm Strokes per minute: 60 spm Table height above floor: 900 mm Motor power: 7.5 kW Electrical connection: 380 Volt, 50 Hz - Overload protection by fracture plate in ram - Pneumatic clutch-brake combination DESCH - Ram counterbalance cylinder - Manual ram adjustment - Two-hand operation - Cam controller - Central lubrication system Vögele - Stroke counter Required space L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Stanje: rabljeno, Single-column eccentric press WEINGARTEN Type ER 63 Mach. No. 52A / 63 Year of manufacture: 1963 Press force: 63 tons Throat depth: 280 mm Table size: 630 x 530 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Strokes per minute: 65 spm Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz - Clutch-brake combination using WEINGARTEN friction thread clutch - Electrically actuated stroke release via foot switch - Gear drive - Overload protection with shear plate - Front crankshaft support bearing Required floor space (L x W x H): 1500 x 1100 x 2500 mm Weight: 4.5 tons Good condition Kjdpfx Aljlb I Dzj Nolr

Stanje: rabljeno, Single Column Eccentric Press WEINGARTEN Type ERV 40 Machine No. 537 / 65 Year of manufacture: 1965 Pressing force: 40 tons Throat depth: 230 mm Table size: 570 x 470 mm Ram area: 250 x 200 mm Clamping pin bore: Ø 40 mm Max. installation height: approx. 520 mm Stroke adjustment: 8 – 88 mm Ram adjustment travel: 63 mm Number of strokes: 70 strokes per minute Klsdpfx Aleffm Hhj Nsr Drive power: 3 kW Mains connection: 380 Volt, 50 Hz - Table height adjustment - Overload protection via shear plate - Clutch-brake combination using WEINGARTEN friction screw clutch - Electric two-hand control and foot switch - Central lubrication via hand pump Space requirement (L x W x H): 1600 x 1150 x 2300 mm Weight: approx. 2.6 tons

Stanje: rabljeno, High-speed Manzoni 40 Ton Press, 150/300 strokes per minute Used – special offer Kljdpskn Hk Tsfx Al Ner

Stanje: rabljeno, Manzoni high-speed press 60 tons, strokes 110/308 Kedpfxokn Hqgo Al Nslr Used - Bargain

Stanje: novo, Leto izdelave: 2017, številka stroja/vozila: DF0152, stiskalna sila: 80 t, HIDRALMAC Four-Column Press – 80 t – 800 × 800 mm – Deep Drawing Press with Cushion For sale is a hydraulic four-column press (deep drawing press) manufactured by HIDRALMAC, offering a press force of 80 t. This machine is designed for drawing and forming processes and features an integrated deep drawing cushion, as well as state-of-the-art control and safety technology. Thanks to its compact design and robust components, it is ideally suited for small batch production, toolmaking, and precision forming tasks. ==== Technical Data & Information: Hydraulic Four-Column Press – Deep Drawing Press – 80 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine Type: Deep Drawing Press - Design: Four-Column Press - Pressing Force: 80 t - Machine Weight: approx. 5.1 t - Total Power Requirement: 12 kW - Operation: Two-hand operation - Main Cylinder: 1 unit ==== Working Area - Working Area: 800 × 800 mm - Table Size: 800 × 800 mm - Working Height: 800 mm - Table Height: 800 mm - Stroke: 500 mm - Travel Path: 700 mm ==== Table & Ram - Ram Plate: 2,800 × 1,300 mm - Column Diameter: 75 mm ==== Speeds - Approach Speed: 9.8 mm/sec - Working Speed: 9.8 mm/min - Return Speed: 18 mm/sec ==== Deep Drawing Unit - Cushion Force: 25 t (at 280 bar) - Cushion Stroke: 200 mm - Rod Diameter: 30 mm - Cushion Speed: 80 mm/sec - Deep Drawing Cushion Motor: 10 kW Klodpfx Alofxyh He Ner ==== Hydraulics & Performance - Main Motor: WEG 15 kW - Pump: Rexroth / Parker axial piston pump - Hydraulic Block & Valves: Rexroth / Parker - Hydraulic Tank: 300 l (oil requirement approx. 250 l) - Additional Oil Tank: 150 l - Hydraulic Pressure Regulation: via PLC (from 10 t) - Air cooling with electric fan - Lubrication: manual via grease nipples or cartridges ==== Control & Operation - Control System: Siemens / Moeller - Operating Modes: automatic, semi-automatic, manual (setup mode) - Control Panel on swivel arm - Movable two-hand operation - USB interface for data transfer - Remote control (Siemens remote maintenance) - Spacer sensors for stroke length adjustment - Pressure consistency: 0–10 sec ==== Safety & Equipment - Light barriers in front and rear (Schmersal, 800 mm) - Additional diagonal guards in lower area - Hydraulic safety monitoring ===== Drawing, forming, small batch production, toolmaking, sheet metal forming Hydraulic press, deep drawing press, four-column press, forming press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery guidelines, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety guideline NR 12, which builds on the aforementioned standards. Our core strengths include custom machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 315 t, hod: 400 mm, širina mize: 2.500 mm, dolžina mize: 1.400 mm, širina plošče bata: 1.400 mm, dolžina plošče bata: 2.450 mm, sila matricne blazine: 63 t, hod blazine orodja: 160 mm, razdalja med stojali: 2.500 mm, nastavitev hidravličnega cilindra: 400 mm, PKZZ I 315.1 je robustna enostranska mehanska stiskalnica z dvotočkovnim pogonom, namenjena visokonatančnemu preoblikovanju velikih pločevinastih delov. Tog dvostebrni okvir zagotavlja odlično stabilnost in enakomerno porazdelitev obremenitve po delovni površini. Kledpfx Aleyx Evze Nor Stiskalnica je v odličnem stanju in je še vedno priključena na električno energijo.

Stanje: rabljeno, Leto izdelave: 1963, Enobatna hidravlična stiskalnica MÜLLER ZE 250/300-12,5 1.3-U, št. 586, letnik 1963, sila stiskanja 250 t, delovno območje 1.300 x 1.100 x 1.000 mm, naknadno vgrajena varnostna rolo vrata ROMA (letnik 2012). Klodeyhqqnjpfx Al Ner

Stanje: rabljeno, Leto izdelave: 1987, številka stroja/vozila: 87 / 906, Pressure: 63 t Stroke: 8 - 80 mm Strokes per minute: 60 - 300 spm Kjdjcxxpcepfx Al Njlr Distance between uprights: 720 mm Table area: 710 x 700 mm Table through-hole: 345 x 100 mm Lateral upright clearance: 320 x 200 mm Ram area: 500 x 400 mm Ram adjustment: 80 mm Throat depth: 350 mm Installation height: 250 / 275 mm Feed length: 220 mm Table height above floor: 1000 mm Total power requirement: 9.2 kW Machine weight approx.: 6.5 t With SZV 3-S gripper feeder designed for strip width of 270 mm, infinitely variable speed adjustment, separate control cabinet, emergency stop safety feature, selector switch for set-up, single stroke and continuous operation, adjustable stroke

Stanje: dober (rabljeno), Leto izdelave: 1984, Tovarna avtomatskih stiskalnic Varšava-Włochy Klodpfx Asw Uaxzjl Ner TIP PXS 100 Ekscentrična stiskalnica, pritisk 100 t Leto proizvodnje: 1984

Stanje: rabljeno, TECHNICAL DATA - Pressure: 4 [t] - Design: * Number of uprights: 2 - Fixed table: * Length: 210 [mm] * Width: 210 [mm] - Frame type: fixed - Table hole: Diameter 80 [mm] - Number of strokes: from 50 to 150 [strokes/min] - Adjustable slide: 40 [mm] - Fixed stroke: 27 [mm] - Max tool height: 148 [mm] - Clearance between uprights - Longitudinal: 230 [mm] Klsdjuhakbspfx Al Nsr - Electrical connection: 380 [Volt] - Total installed power: 0.75 [HP] - Weight: 640 [kg] - Space requirement (Length x Depth x Height): 1100 x 1000 x 1500 [mm]

Stanje: rabljeno, TECHNICAL DATA - Pressure: 4 [t] - Number of columns/frames: 2 Klsdjuhahmspfx Al Njr - Fixed table dimensions: 210 x 210 [mm] - Fixed press frame - Hole Ø in table: 80 [mm] - Number of strokes: 50 - 150 [spm] - Adjustable slide: 40 [mm] - Fixed stroke: 27 [mm] - Max. tool height: 148 [mm] - Longitudinal clearance between uprights: 230 [mm] - Max. workpiece diameter in regrinding: 30 [mm] - Max. workpiece thickness in regrinding / cutting: 1.5 / 2 [mm] - Voltage: 380 [V] - Installed power: 4.5 [kW] - Space requirement: 1100 x 1100 x 1650 [mm] - Weight: 500 [kg]

Stanje: rabljeno, TECHNICAL DATA - Pressure: 4 [t] - Max. workpiece diameter: 30 [mm] - Max. workpiece thickness: 2 [mm] - Strokes per minute: 150 - Gap between supports: 230 [mm] - Distance between table and slide: 148 [mm] - Table diameter: 220 [mm] Ksdpfeuhahajx Al Nslr

Stanje: rabljeno, TECHNICAL DATA - Pressure: 4 [t] - Number of columns: 2 - Fixed table dimensions: 210 x 210 [mm] - Fixed press frame - Hole Ø in table: 80 [mm] - Number of strokes: 50 - 150 [spm] - Adjustable slide: 40 [mm] - Fixed stroke: 27 [mm] - Max. tool height: 148 [mm] - Longitudinal clearance between columns: 230 [mm] - Max. workpiece diameter for regrinding: 30 [mm] - Max. workpiece thickness for regrinding / cutting: 1.5 / 2 [mm] - Voltage: 380 [V] - Installed power: 4.5 [kW] Kedpouhahgjfx Al Nelr - Space requirement: 1100 x 1100 x 1650 [mm] - Weight: 500 [kg]

Stanje: rabljeno, TEHNIČNI PODATKI - glejte slike Klsdpfsuhakhsx Al Njr

Stanje: rabljeno, TECHNICAL DATA - Pressure: 4 [t] - Max. part diameter: 30 [mm] - Max. part thickness: 2 [mm] - Strokes per minute: 150 - Gap between uprights: 230 [mm] - Distance between table and slide: 148 [mm] - Table diameter: 220 [mm] Kljdpeuhag Asfx Al Nsr