Martin Martin T72 nakup rabljenega (673)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Ahlen
811 km
Formatna žaga
MartinT72
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: V165126, Funkcionalnost: popolnoma funkcionalen, Naprodaj je visokokakovostna formatna krožna žaga znamke Martin (Otto Martin Maschinenbau, izdelano v Nemčiji) – robusten in vzdržljiv profesionalni stroj za mizarje in tesarje.
Duodpjy D Iyaofx Afaju
Proizvajalec: Martin
Letnik: cca 1989
Žagin list: Ø 200–450 mm
Hitrosti: 2800 / 4000 / 5500 obr/min
Napetost: 380 V / 50 Hz
S stabilnim pomičnim vozičkom
Paralelni in prečni prislon prisotna
Priključek za odsesavanje prisoten
Stanje:
Rabljeno, vendar popolnoma funkcionalno
Običajni znaki uporabe (glejte slike)
Zelo robustna industrijska kvaliteta – ni izdelano za hobi uporabnike
Ogled in preizkus po dogovoru možen.
Idealno za mizarsko delavnico, obrt ali zahtevnejšo lesno obdelavo.
Lokacija: 45356 Essen
Mali oglas
Bastogne
812 km
MARTIN T72
MARTINT72
Pokliči
Stanje: rabljeno, 3200 mm voziček
Nagibno rezilo s hidravličnim dvigom in spustom
Rezalnik
Dodpfxsyf Epts Afajuu
380V
Prodano v stanju, kot je, brez pregleda
Mali oglas
Miastko
885 km
Drsna namizna žaga
MartinT72
Pokliči
Stanje: zelo dobro (rabljeno), Motor 5,5 kW
Schnitthöhe 9 cm
Tischlänge 330 cm
Durchlass 100 cm
Duedowtl Ndepfx Afaou
Vorritzer
Schnittwinkel und -höhe hydraulisch einstellbar
Mali oglas
Wijchen
922 km
Formatna krožna žaga Martin T 72 - 3,3, leto 1996
MartinT 72 - 3,3
Pokliči
Stanje: rabljeno, Leto izdelave: 1996, skupna dolžina: 3.900 mm, skupna širina: 2.100 mm, skupna višina: 1.520 mm, Weight: 1,500 kg
- Year of manufacture: 1996
- Documentation available: No
Djdpfx Aexdlx Refaeuu
- CE marking present: Yes
- CE certificate available: No
- Serial number: V233567
- Roller table length [mm]: 3200
- Table width [mm]: 1300
- Min. saw blade diameter [mm]: 200
- Max. saw blade diameter [mm]: 450
- Saw blade bore diameter [mm]: 30
- Dust extraction nozzle diameter [mm]: 120
- Controlled axes: Tilting
- Manually adjustable axes: Cutting height
- Options: Scoring unit
- └ Scoring blade diameter [mm]: 120
- └ Scoring blade bore diameter [mm]: 22
- Spindle speed:
- └ Min. spindle speed [rpm]: 2800
- └ Max. spindle speed [rpm]: 5500
- └ Spindle speed adjustment: Stepped
- Voltage [V]: 400
- Power consumption [A]: 13
- Fuse [A]: 16
- Transport dimensions: 3900mm x 2100mm x 1520mm (L x W x H)
- Transport weight [kg]: 1500 kg
- Number of transport packages: 1
Financial information
VAT: The stated price is exclusive of VAT
VAT/margin scheme: VAT deductible for businesses
Delivery and trade-in possible at any time for all types of industrial equipment
Yorick Diebels
Mali oglas
Bergatreute
441 km
Drsna namizna žaga
MartinT 72 A
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2000, Formatna žaga s predrezilom
3 m pomični voziček
Digitalni prikazi
Širinsko nastavljanje ni več motorizirano
Višinsko nastavljanje predelano na nožno hidravliko
Dsdpfx Afotw Hd Asaouu
Pritisna letva ni vključena v ceno
Mali oglas
Saerbeck
858 km
Formatna žaga
MartinT 72
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 1995, Formatna krožna žaga
Proizvajalec: Martin
Tip: T72
Leto izdelave: 1995
- Po vklopu stroja potrebuje prikazovalnik na upravljalni enoti približno 15 minut, da se kaj prikaže.
- Manjka ploščati jermen za predrezilo. Potrebno ga je zamenjati.
- Pnevmatsko vpenjanje vzporednega prislona ne drži.
Dolžina sani: 3.300 mm
Širina reza: ca. 1.200 mm
Višina reza: ca. 170 mm
Največji premer žaginega lista: 500 mm
Moč: 5,5 kW
Duodpfx Ajy A I Nrofaju
Število obratov: 2.800 / 4.000 / 5.500 obr/min
Predrezilo: Da
Zavorni motor: Da
Mali oglas
Schwanberg
69 km
Drsna namizna žaga
MARTINT60
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Sliding table length: 3700 mm
Duedpfoxzfqbjx Afaju
Cutting width at rip fence: 850 mm
Cutting width at crosscut fence: 3200 mm
Cutting depth: 120 mm
Scoring unit: no
Saw blade height adjustment: electric / position control
Saw blade tilt adjustment: electric / position control
Rip fence adjustment: manual
Saw blade diameter: 400 mm
Speeds: 4000 / 4800 / 6000 rpm
Motor power: 7.5 kW, 400 V, 50 Hz
Extraction connection: 80 and 120 mm
INCLUDES:
Laser cut-line indicator
MITREX double mitre fence
Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm
Weight approx. 1200 kg
Note for used machines:
• Errors in technical details and prior sale excepted.
• Stated prices are ex location – loaded free of charge!
• The machines have been cleaned and function-tested.
• All machines are sold as seen with no warranty or guarantee of any kind. Buyers are welcome to inspect machines on site.
• Special agreements are only valid in written form.
(We will only respond to inquiries that include your address & phone number!)
Mali oglas
Nattheim
457 km
Formatna žaga
MartinT 73 Automatic
Pokliči
Stanje: rabljeno, Leto izdelave: 2006, Motorizirani paralelni prislon, vzdolžni prislon z zaslonom, enostranski motoriziran nagib, drsni voziček 3000 mm, 5,5 kW predrezilo. Lokacija zaloge: dobavitelj
Djdpfx Aozawiuofajuu
Mali oglas
Eislingen/Fils
489 km
Center stružnica
MARTINDL 500
Pokliči
Stanje: rabljeno, Leto izdelave: 1951, številka stroja/vozila: 6886, Swing diameter over bed: 500 mm
Swing diameter over cross slide: 300 mm
Swing diameter in gap: 760 mm
Turning length: 1100 mm
Centre height: 250 mm
Feed rates - cross: 0.023 - 0.32 mm/rev
Feed rates - longitudinal: 0.07 - 1.0 mm/rev
Leadscrew pitch: 4 / 12 settings
Spindle bore: 65 mm
Spindle speed: 13 - 600 rpm
Thread cutting - metric pitch: 0.5 - 84 mm
Thread cutting - imperial: 0.375 - 14 TPI
Tailstock quill travel: 200 mm
Total power requirement: 3 kW
Machine weight approx.: 2.7 t
Dsdpfx Ascxxq Ujfasuu
Space requirements approx.: 2.8 x 1.2 x 1.25 m
with longitudinal and cross feed, 3-jaw chuck Ø 380 mm; swing diameter over bed without bridge 760 mm;
Mali oglas
Sankt Englmar
357 km
Namizni rezkar
MartinSchwenkfräse T26 Duo Control
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, številka stroja/vozila: V 453572, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 1.770 h, moč: 6 kW (8,16 KM), vhodna napetost: 400 V, vhodni tok: 19 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, premer vretena: 30 mm, vrtilni razpon: 90 °, nastavitev vzdolžnega vodila: poganjan z motorjem, vrsta aktuacije: električni, največja hitrost vrtenja: 9.000 obr/min, vrtljajska hitrost (min.): 3.000 obr/min, širina mize: 900 mm, dolžina mize: 2.405 mm, skupna dolžina: 3.000 mm, skupna širina: 1.260 mm, skupna višina: 1.800 mm, skupna masa: 1.300 kg, leto zadnje generalne obnove: 2026, Oprema: CE označba, Martin T26 DuoControl Spindle Moulder
5/6 kW (6.8/8.2 HP) - 400 V, 50 Hz with neutral conductor, CE-compliant configuration with 2-axis control for spindle height and fence positioning, electromechanical tilt adjustment with digital display, including swiveling control panel with CPS Gamma V safety system
*with 40 mm / 160 mm long milling arbor
// Table size:
2405 mm x 900 mm
// Table height:
900 mm
// Table openings:
electrical adjustment 70 mm - 220 mm
// Weight: 1300 kg
// Spindle speeds:
3000 / 4500 / 6000 / 9000 rpm
with quick-action belt tensioning system
// Displays:
electric speed display
digital (LED) display for spindle height (absolute and relative),
as well as tilt angle
automatic correction value display for milling depth
dual hour meter for total and batch operating hours
// Milling spindle:
electrically tiltable +/- 45.50° via button,
electric height adjustment with rapid and fine feed, steep taper SK 40,
Dornfix quick change system
including torque wrench
maintenance-free electric braking
Electro-pneumatic locking via selector switch
// Spindle travel:
150 mm at 5/6 kW and 7.5 kW, 125 mm
// Milling fence:
Aigner integral fence
Milling jaws made of hard-coat aluminum, with mountings for profile board or guide rail
Handwheel adjustment with mechanical digital counters
Infeed jaw adjustable separately
Dsdpfx Aozamwuofaouu
Max. tool diameter: 250 mm
// Extraction system:
Extraction port 120 mm diameter at the fence
Extraction port 120 mm diameter under table
// Maintenance equipment:
Central lubrication via pump
Spindle lubrication via grease quantity controller
1 x open-end wrench
1 x torque wrench for Dornfix system
1 x oil gun
1 x grease gun filled with long-life grease
1 x ball bearing for guide ring 62 mm
1 x FRS95 arc guard for work on the guide ring, with extraction port and feed strip
// Electrical equipment:
Lockable main switch, automatic star-delta starter, wear-free electric brake
Contact for extraction system control, undervoltage release, CEE torque socket for feed unit (5-pin socket)
Selector button for direction of rotation, motor protection switch, and winding protection
BG inspection certificate no. 991002
GS-certified for wood dust no. 991001
EC type-tested no. 991003
Additionally:
1 x electrically adjustable table opening
1 x support for swiveling feeder mount with motorized height adjustment with control panel
1 x extension for pull-out table width
Mali oglas
Egenhofen
373 km
Formatna žaga
MartinT75
Pokliči
Stanje: rabljeno, Dolžina vozička: 2500 mm
Širina reza na vzdolžnem prislonu: 1000 mm
Širina reza na prečnem prislonu: 2800 mm
Globina reza: 120 mm
Predrezilo: ne
Višinsko nastavljanje žaginega lista: ročno kolo
Nagibno nastavljanje žaginega lista: ročno kolo
Nastavljanje vzdolžnega prislona: ročno
Prikaz kota žaginega lista: skala
Prikaz višine reza: -
Prikaz vzdolžnega prislona: skala
Duodpey S Rq Djfx Afaju
Prikaz prečne letve: skala
Premer žaginega lista: max 400 mm
Št. obratov: 2800 / 4000 / 5500
Moč motorja: 5,5 kW
Priključek za odsesavanje: 120 mm
Dolžina stroja: 3000 mm
Širina stroja: 1800 mm
Teža: pribl. 1300 kg
Mali oglas
Bitburg
758 km
Široki skobeljnik
MartinT45 - sofort verfügbar -
Pokliči
Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead
The T45 thickness planer offers ideal conditions for modern production:
It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly.
• Planing width: 630 mm
• Weight: approx. 1,200 – 1,400 kg
Duodpfx Aoqlck Nefaou
• Planing height: 2.8 – 300 mm
• Table length: 1,260 mm
• Minimum workpiece length: 270 mm
• Spindle speed: 5,000 rpm
• Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter
• Cutterhead: Solid steel Xplane cutterhead
Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included;
The emission sound pressure level LpA during machining is reduced by 10 dB(A)
• Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface
• Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar
• Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s
• Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples
• Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV
• Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)]
Idle sound (without extraction) P1 65
Idle sound (with extraction) P1 77
Operating sound (without extraction) P2 65
Operating sound (with extraction) P2 78
Sound power level LWA according to DIN EN ISO 3746 [dB(A)]
Idle sound (without extraction) 84
Operating sound (with extraction) 90
Dust emission: Low-dust per DGUV 209-044 / BGI 739-1
Location: ex stock 54634 Bitburg
- Immediately available -
Mali oglas
Bitburg
758 km
Široki skobeljnik
MartinT45 - sofort verfügbar -
Pokliči
Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead
The T45 thickness planer provides ideal conditions for modern manufacturing:
It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions.
• Planing width: 630 mm
• Weight: approx. 1,200 - 1,400 kg
• Planing height: 2.8 - 300 mm
• Table length: 1,260 mm
• Minimum workpiece length: 270 mm
• Speed: 5,000 rpm
• Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter
• Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change
• Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface
• Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed
• Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s
• Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple
• Accessories: 1 grease gun (filled with long-life grease)
1 oil gun
1 open-ended wrench
1 tool for knife change
1 pair of dummy knives 640 mm
2 pairs of TERSA reversible knives 640 mm CV
• Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)]
Idle noise (without extraction) P1 65
Idle noise (with extraction) P1 77
Operating noise (without extraction) P2 65
Operating noise (with extraction) P2 78
Dsdpfeqlckpjx Afaouu
Sound power level LWA according to DIN EN ISO 3746 [dB(A)]
Idle noise (without extraction) 84
Operating noise (with extraction) 90
Low-dust emissions according to DGUV 209-044 / BGI 739-1
Location: ex stock 54634 Bitburg
- immediately available -
Mali oglas
Bitburg
758 km
Vrtljiva drsna namizna žaga
MartinT66 - sofort verfügbar -
Pokliči
Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66
Cutting height: 155 mm
Saw blade diameter: 450 mm
Tiltable: one side
Drive power: 5.5 kW
Sliding table length: 3.0 m
Cutting width: 1350 mm
Rip fence adjusted by handwheel
Standard crosscut table with length stop for angle cuts
Analog length stop with continuous fence
Rear table extension
T66
T6615/2-a Drive power 5.5 kW
T6630/3-a Sliding table length 3.0 m
T 6635/3-a Cutting width 1350 mm
T 6641-a Rip fence moved by handwheel
T6660/1-a Standard crosscut table for angle cuts
T 6670-a Analog length stop
T 6680/1-a Rear table extension
Location: ex-stock 54634 Bitburg
- immediately available -
Some of the options shown in the photos
are not included in the offer.
Dusdpsv Erkaefx Afaju
Mali oglas
Bitburg
758 km
Površinski skobeljnik
MartinT 54 - sofort verfügbar
Pokliči
Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer
Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course.
Technical Data:
Table width: 500 mm
Table length: 2,840 mm
Maximum depth of cut: 8 mm
Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4
Speed: 5,000 rpm
Motor power: 5.5 kW
Fence adjustable up to 45°
Auxiliary fence for small workpieces
Dsdpfepgkmwsx Afaouu
Motorized table adjustment
Features:
T 54
T 5462-a Suvamatic
T 541-a Tersa 4-knife cutterblock
Location: In stock, 54634 Bitburg
- available immediately -
Mali oglas
Bitburg
758 km
Oblikovalec površin s spiralnim rezilom
MartinT 54 - sofort verfügbar -
Pokliči
Stanje: novo, Leto izdelave: 2025, Surface Planer Martin T 54
Only with a high-quality surface planer can you truly achieve the perfect foundation. The T54 was developed precisely with this goal in mind. It enables you to easily plane workpieces at the most modern standards and safely fit them with accurate angled edges. The machine comes as standard with a TERSA solid steel cutter block. The Xplane cutter block with shear-cut action is available as an option. Chamfering is effortless, as the user-friendly single-handed adjustment allows any angle between 90° and 45° to be quickly set. The robust cast iron tables of the T54 provide a secure platform, even for large and heavy workpieces. If additional support surface is required, both the infeed and outfeed tables can be extended by 380 mm each—also made of cast iron, of course.
Technical Data
Table width: 500 mm
Table length: 2840 mm
Maximum cutting depth: 8 mm
Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4
Rotation speed: 5000 rpm
Motor power: 5.5 kW
Fence adjustable up to 45°
Auxiliary fence for small workpieces
Electrically driven table adjustment
Equipment:
T 54
T 5462-a Suvamatic
T5406/3-a solid steel Xplane cutter block with 3 spiral knife rows (each row with 26 domed carbide knives; 2 counter knives), includes full knife set and a Torx T20 T-wrench; spindle speed 6,000 rpm included.
The emission sound pressure level LpA during operation is reduced by 8 dB(A).
Location: ex-stock 54634 Bitburg
Duodspq If Djpfx Afaeu
- immediately available -
Mali oglas
Bitburg
758 km
Oblikovalec debeline
MartinT 42 - Top -
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 1982, Rabljeni debelinski skobeljni stroj Gebr. Martin, tip: T 42
Leto izdelave: 1982
Širina skobljanja: 630 mm
Višina skobljanja: 250 mm
Podajalna hitrost: 8-20 m/min
Sesalni priključek: 160 mm
Teža: cca 870 kg
Djdpfxjt U Rn Ss Afaouu
Gumirani vstopni in izstopni valji
Dvo-nožni valj z ravnimi rezili
Centralno mazanje
Višina skobljanja nastavljiva z ročnim kolesom
Preklopno stikalo zvezda-trikot
Lokacija: na zalogi 54634 Bitburg
- takoj na voljo -
Mali oglas
Bitburg
758 km
Drsna namizna žaga
MartinT 77 - sofort verfügbar -
Pokliči
Stanje: novo, Leto izdelave: 2025, Martin panel saw T 77 – new stock machine –
Top Features – Double-sided tilting –
Dodsw D T Dkjpfx Afasuu
Equipment:
- T 7710/2-a PREX saw unit, double-sided tilting
- T 7725/2-a Cutting height 205 mm
- T 7720/2-a Infinitely variable drive power 5.5 kW
- T 7730/4-a Sliding table length 3.3 m
- T 7735/3-a Cutting width 1350 mm
- T 7743-a Electronically controlled parallel fence, can be lowered in end position
- T 7755-a 3-axis scoring unit
- T 7757-a Scorer lighting Safe Light
- T 777572-a RadioCompens angle cutting system with continuous fence
- T 7780/1-a Rear table extension 610 x 860 mm
- T 7792/2-a Sensor monitoring for side-shiftable safety guard, 2 x 45 degrees
- T 7704/2-a ConnectPad 12.9" / 13"
- T 7704/20-a OtterBox Defender Case
- T 7706/1-a ConnectApp at Classic operation level
Location: ex stock 54634 Bitburg
- available immediately -
Mali oglas
Bitburg
758 km
Oblikovalec debeline
MartinT45 - sofort verfügbar -
Pokliči
Stanje: novo, Leto izdelave: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock
Accessories: 7.5 kW
The T45 thickness planer offers the ideal conditions for modern production:
It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control makes setting the planing height very easy thanks to 99 programmable planing dimensions, so that already the first workpiece fits perfectly. The thickness table can be moved at the push of a button or adjusted upwards in increments of 0.1 mm. The feed control switches are also conveniently located. The heavy, vibration-damping composite frame, together with the high-quality bearing of the cutterblock, ensures outstanding surface results. Thanks to the sound-dampening design, the machine already operates at low noise levels even in the standard version.
• Planing width: 630 mm
• Weight: approx. 1,200 – 1,400 kg
• Planing height: 2.8 – 300 mm
• Table length: 1,260 mm
• Min. workpiece length: 270 mm
• Spindle speed: 5,000 rpm
• Operation: Single-axis control for planing dimensions; up to 99 values can be stored, 49 of which are available for a freely programmable sequence; push buttons for manual rapid and fine adjustment of the planing thickness through digital display, push buttons for cutterblock start/stop, integrated operating hours counter
• Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. lock for easy knife change
• Thickness table: Electric thickness table adjustment with fine setting, traversing speed 10 mm/s, securely guided on 4 supporting spindles, finely planed table surface
• Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are gentle on material and self-cleaning, rollers can be changed easily; segmented pressure bar at the infeed
• Extraction: Hinged, divided hood with chip extraction port Ø 160 mm, optionally connectable left/right (in special cases on both sides); minimum extraction air volume: 27 m³/min at 20 m/s
• Maintenance equipment: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterblock via nipples
• Accessories: 1 grease gun filled with long-life grease
1 oil gun
1 open-ended spanner
1 tool for knife change
1 pair dummy knives 640 mm
2 pairs TERSA reversible knives 640 mm CV
• Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)]
Idle noise (w/o extraction) P1 65
Idle noise (w/ extraction) P1 77
Operating noise (w/o extraction) P2 65
Operating noise (w/ extraction) P2 78
Dujdsqlclbopfx Afasu
Sound power level LWA according to DIN EN ISO 3746 [dB(A)]
Idle noise (w/o extraction) 84
Operating noise (w/ extraction) 90
Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1
Location: ex stock 54634 Bitburg
- immediately available -
Mali oglas
Bitburg
758 km
Obrnilni vretenasti rezkar - takoj na voljo -
MartinT 27 Flex
Pokliči
Stanje: novo, Leto izdelave: 2025, Martin Spindle Moulder T 27 Flex – double-sided tilting –
Flexibility for today and tomorrow.
Setting up a tilting spindle moulder is usually a big challenge. Not with the T27 Flex and its modern touchscreen control: thanks to the integrated tool compensation, you can set up even complex moulding profiles with a tilted spindle in no time at all. This is how you can efficiently utilize the large tilt range of 2 x 46° – allowing you to completely cater to your requirements. Additionally, the machine can be precisely customized to the individual needs of your operation.
Equipment:
T 27 Flex
T 2711-a Digital display of fence jaw position in the controller
T 2731-a Table extension on both sides + extendable workpiece support
T 2740-a Centrex guard
T 2742-a Integral fence
T 2743-a Auto Lock fence jaw clamping system
Dsdpfxer Hr D Ne Afaeuu
T 2790-La Console for feed stand attachment, left side
The photo shows a sample machine only / feed and support are not included
Included items are detailed in the description
Location: Arriving at stock 54634 Bitburg
– Available in two weeks –
Mali oglas
Gerolzhofen
542 km
Nagibna vretenasta rezkalnica
MARTINT23
Pokliči
Stanje: rabljeno, Leto izdelave: 1982, Vključno s povsem novim stikalom zvezda-trikot (Stern-Dreieck-Schalter)
rabljeno
v dobrem stanju
očiščeno
preverjeno delovanje
prenovljeno
Izdelovalec: Martin
Tip: T23
Leto izdelave: 1982
Št. stroja: 82468
Motor, ojačana moč kW: 4,7 / 5,7
nagibno od do: 0 - 45 °
motorna / mehanska zavora: nožna zavora
Motor, 2 hitrosti / preklopno število polov: da
Število obratov/min: 3 / 4,5 / 6 / 9000
Možen obrat desno-levo: da
Velikost mize d x š mm: 1100 x 950
Premer vretena za rezkanje mm: 30
Rezkalni naslon z natančno nastavitvijo: da
Dujdpfxszbc D He Afaeu
Vtičnica za podajalni aparat: da
Priključek za izpuh mm: 100 / 120
Potrebni prostor pribl. d x š x v mm: 1100 x 950 x 1100
Teža pribl. kg: 1000
Lokacija skladišča: 97447 Gerolzhofen, prosto naloženo, nezapakiran
Predaja v obstoječem stanju kot ogledano
brez garancije ali jamstva
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Nattheim
457 km
Obračalni vreteni rezkalnik z drsno mizo
MartinT 25
Pokliči
Stanje: rabljeno, Leto izdelave: 1991, Upravljalna plošča v višini oči Aigner z integralnim prislonom, vključno s podajalcem s pomično sani (brez prislonskega ravnila). Frezerski prislon z digitalnim prikazom in mehanizmom za odklon. Lokacija skladišča: Nattheim.
Djdpsyi A Tdsfx Afaeuu
Mali oglas
Nemčija
614 km
Sredinski stružnica in stružnica za vreteno
MartinKMK 40
Pokliči
Stanje: rabljeno, Leto izdelave: 1975, Technical Details:
Duodpfeu Ix E Hox Afaju
Swing diameter over bed: 400 mm
Swing diameter over carriage: 220 mm
Turning length: 1100 mm
Centre height: 180 mm
Spindle bore: Ø 45 mm
Speed range: 31.5 - 1,400 rpm / 12 steps
Feed range x-axis: longitudinal: 0.08 - 1.10 m/min
Feed range y-axis: cross: 0.028 - 0.40 m/min
Tailstock quill taper: MT4
Tailstock quill travel: 200 mm
Total power requirement: 4.0 kW
Machine weight approx.: 1.7 t
Machine dimensions (LxWxH) approx.: 2.5 x 1.1 x 1.4 m
Equipment:
- Three-jaw chuck Ø 250 mm manufacturer Forkardt with exchangeable jaws
- Multifix tool post
- Coolant system with pump
- Chuck guard
- Chip tray
- Splash guard
Accessories:
- Chuck key
- Tool holder
- 2 gears
Mali oglas
Langenfeld (Rheinland)
808 km
Vrtalno rezkalni stroj z vrtljivo vreteno 2x 45 stopinj
MartinT26
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Robust tilting spindle moulder T 26, tiltable from -45 to +45 degrees
Pole-changing drive motor 5 / 6 kW with automatic motor brake
Forward/reverse operation
Tilting angle electrically adjustable from -45 to +45 degrees
Height adjustment max. 150 mm, electrically adjustable
When adjusting the height, the correction factor for the tilt angle is shown in the top display and can then be set at the stop, allowing for settings based on drawings
Four speeds: 3000, 4500, 6000 and 9,000 rpm
Spindle diameter 30 mm, quick-change spindle with torque wrench
Comfort fence T226 with digital displays for total adjustment and individual infeed jaw, as well as input for cutter diameter—in this case, the cutting depth is calculated automatically
Fence with lifting device, swivels out of the way (for curve milling operations)
Duedezbm Tfspfx Afaou
Table extensions left and right with pull-out workpiece support
Support can be extended by 700 mm
Table length approx. 2400 mm
Fold-away fence for slot milling
Workpiece pressure device Aigner Centrex
Original Martin cast jaws left 500 mm, right 500 mm with two insert rulers
3-roller power feed HolzHer ET117, with 8 speeds, forward/reverse, new rollers
Feeder socket can be switched from the control panel
Comfort stand with electrically height-adjustable feeder support, which can be swung away for machine setup and then simply locked back in place.
Extraction port 2 x 120 mm
Compressed air connection 6 bar
Emergency stop switch
Some parts of the machine have been newly repainted (special colour RAL1015)
V-belt replaced
Operating manual
CE mark
Dimensions approx. 3000 x 1500 x 1830 mm (LxWxH). Weight approx. 1800 kg.
The machine can be demonstrated on site by prior appointment. We only offer machines that are ready for demonstration in our warehouse; see “more offers from this supplier.”
Mali oglas
Bad Honnef
756 km
Namizni rezkalni stroj MARTIN -uporabljen-
MARTIN
Pokliči
Stanje: rabljeno, Martin Spindle Moulder -used-
Fine-adjustable milling fence, reversible rotation (clockwise/counterclockwise)
----- Technical Data -----
Table size: 1,000 x 930 mm
Working table height: 860 mm
Spindle diameter: 40 mm
Usable spindle length: 160 mm
Max. cutter diameter: 255 mm
Max. retractable cutter diameter: 255 mm
Height adjustment: 150 mm
Speeds: 3,000/4,500/6,000/9,000 rpm
Motor: 4.7/5.7 kW
Dedpsu R Td Njfx Afaouu
Extraction port Ø: 120 mm
Dimensions (LxWxH): 1,000 x 930 x 1,050 mm
Olajšamo vam iskanje: "martin martin t72"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.





























































































































































































