Mae S 100 Sz nakup rabljenega (91.405)

Stanje: rabljeno, številka stroja/vozila: 51568, Pressure: 100 t Stroke: 0–500 mm Table surface: 800 x 650 mm Ram surface: 800 x 600 mm Table through-hole: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Machine weight approx.: 5.7 t Throat depth: 310 mm Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Iijdpfecxxrrox Abxec Installation height specified with ram at top dead center. Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun speed measurement: 135 mm/s, Overrun distance: 44 mm.

Stanje: rabljeno, Leto izdelave: 1979, Tlak 100 t Hod 500 mm Površina mize 4000x500 mm Teža stroja ca. 5,7 t Hidravlična ravnalna stiskalnica tip HY – S 100 RH MAE komplet z ravnalno enoto Leto izdelave 1979 Pregledano po UVV Hod 500 mm Tlačna moč 100 t Miza 4000 x 500 mm Teža 5700 kg Ijdpjy Tpr Aofx Abxjic

Leto izdelave: 1991, stanje: rabljeno, Pressure: 100 t Throat depth: 380 mm Stroke: 300 mm Table area: 1700x700 mm Ram area: 1400x700 mm Installation height: 650 mm Total power requirement: 30 kW Machine weight approx. 10 t Space requirements approx. 2400x3600x3400 mm Pressure- and stroke-dependent shut-off BWS for safety and cycle operation Fixed stop Pressure switch Rapid approach and working stroke Two-hand operation Approved for manual loading operations Iisdpfx Ajlp U Aysbxsc

Stanje: pripravljen za uporabo (rabljen), DROOP & REIN SZ 100 / Stroj za vlečenje mazalnih utorov - Največji obdelovalni premer: 140 mm - Vretensko vreteno: 40 mm - Dolžina utora v enem zamahu: 100 mm - Razdalja med vpenjalno glavo stružnice in konico konjička: 350 mm - 3 delovne hitrosti - Električna zaščita vpenjalne glave - Splošno dobro/delovno stanje Dimenzije (D x Š x V): 0,9 x 0,6 x 1,5 m / Teža: 300 kg Iodsyl R Etopfx Abxoic Pridržujemo si pravico do napak in tipkarskih napak.

Stanje: rabljeno, Max. delivery volume: 108.8 ml/stroke, speed: 5–6 strokes/min, capacity: 2 x 20 l, with documentation. The machine has hardly been used. Ijdjw D Dc Djpfx Abxoic

Stanje: rabljeno, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture: approx. 1977 Rated pressing force: 63 t Pressing force: 50 tonnes (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Isdpfedzp Trox Abxeic Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. daylight opening: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 l Drive power: 15 kW Power connection: 380 V, 50 Hz - Hydraulic drawing cushion beneath the table with bored holes through the table plate - Two-hand operation - Electrical control cabinet damaged Space requirement (L x W x H): 2000 x 1200 x 3420 mm Weight: approx. 5 t The machine is operational, but the control cabinet is mechanically damaged. During test operation, the machine achieves a pressing force of 50 tonnes; it is presumed that a pressure relief valve is opening.

Stanje: generalkompletno obnovljen (rabljeno), S&F Vibrating Screen Machine | Screening Machine Type ASM-100 factory-refurbished (completely overhauled) with new bearings (flange bearings) and new oscillating elements (rubber buffers) Brand: S&F GmbH Model: ASM-100 Year of manufacture: 2022 Screening capacity: approx. 10 - 12 m³/h (for wood chips, depending on material) Fractions: 3 Screening area: 2.0 m² per mesh size Screen decks: 2 units Mesh size of screens: - 1st deck: punched perforated plate screen, D = 40 mm or as agreed - 2nd deck: punched perforated plate screen, D = 8 mm or as agreed Drive power: 1.1 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Version: ECO Line Machine weight: approx. 650 kg Machine color: RAL 7040 window grey // Safety housing: RAL 3020 traffic red Screen inserts freely selectable Suitable for screening the following bulk materials, among others: Iisdpfxszbvy Uj Abxec - Wood chips - Wood shavings and sawdust - Biomass - Wood pellets - Charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibratory screening machine | Flat screen | Vibrating screen | Roller sifter | Screening machine for wood chips | Screening machine for CHP plants

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Iiodpfx Absk Eakvexec Electrical specifications: - 230 V - 0.7 A - 50 Hertz - IP65

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Model: Unicon-D 2000/400/450/100 Year of manufacture: 2015 Electrical data: - 230 V - 0.7 A Iisdpfxolatz Do Abxoc - 50 Hertz - IP65 Dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Stanje: novo, Schmersal MZM 100 ST2-SD2PREM-A safety interlock, unused in opened original packaging, 100% functional, scope of delivery as shown in photos Iijdjpnpntopfx Abxjc

Stanje: rabljeno, Single-Column Hydraulic Press with Drawing Cushion RÖCHER Type REP 100.01 SZ Hydraulic Drawing Press Machine No. 15,499 Year of manufacture: 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with through-hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tons (400 kN) Drawing cushion stroke: 200 mm Drawing cushion surface: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Max. hydraulic operating pressure: 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Electrical connection: 400 Volt, 50 Hz (63 Amps) - Operation and programming via control panel PC 670 touch panel, keyboard and mouse - Machine control via Siemens S7-300 PLC - Ram stroke and pressing force programmable via the control system - Drawing cushion with drawing and ejector function - Drawing cushion force infinitely adjustable - Ram and drawing cushion fitted with direct travel measurement systems - Drawing cushion can be moved in and out under the press area, for punching operations using the through-hole - Floor-level installation, drawing cushion does not extend into the floor - Pressure and travel shut-off Iodpjyupulofx Abxjic - Fixed stop with indirect measuring system - Pressure holding time infinitely programmable - Table surface with holes for drawing cushion ram rods - Ram with ejector - Cutting stroke damping - Stroke release via two-hand operation, foot switch, hand lever, and push button on the control panel - LEUZE light barrier as reach-in protection in safety mode - Front mirror columns on the press table laterally adjustable - Electrical control cabinet mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose lines for tool temperature control or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirement for the press (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Stanje: dober (rabljeno), Technical data for the pallet pull-out: Racking system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x pallet pull-out, used Iiodpfx Absww Im Hjxjc for rack depth: 800 mm Material color: blue Total depth: approx. 810 mm Total width: approx. 1,295 mm Height: approx. 265 mm Extension: 100% = 740 mm Weight per unit: approx. 100 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If you wish to have the item transported to you or shipped, this will incur additional costs, which can be provided separately depending on delivery location and scope of delivery.

Stanje: novo, številka stroja/vozila: S-CL-100-FN-EC, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, volumenski pretok: 134 m³/h, skupna višina: 475 mm, skupna dolžina: 250 mm, skupna širina: 250 mm, skupna masa: 17 kg, Oprema: Na voljo je tipska ploščica, ISI S-CLEANER Mechanical Air Filtration Unit (Solder Fume Extraction) For up to 1 workstation Iodpfx Ajwpu Twjbxjic Type: 100 FN Design: Semi-mobile (glide skids / no castors) Control: none Horizontally oriented, semi-mobile mechanical air purifier with EC radial fan for extracting soldering fumes. TECHNICAL SPECIFICATION: Airflow: - 134 m³/h (air volume) - 100 m³/h (effective air output) (depending on filter configuration, without extraction elements) Inlet connection: NW 50 mm (rear) Filter configuration: - Pre-filter - HEPA filter H13 - Activated carbon cassette (refillable) Colour: RAL 7035 light grey Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-efficient EC technology Airflow: not adjustable Dimensions: Length 250 mm / Width 250 mm / Height 475 mm Weight: 16.5 kg

Stanje: rabljeno, Leto izdelave: 1961, Premer obdelovanca - maks. 100 mm Premer obdelovanca - min. 10 mm Dolžina obdelovanca 1000 mm Skupna potrebna moč 16 kW Teža stroja cca 3 t Iiedpfx Aowwl I Ijbxoc Potrebni prostor cca 0 m Vodila so bila obnovljena pred 10 leti.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, obratovalne ure: 76.482 h, stružna dolžina: 800 mm, premer struženja: 430 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 455 mm, pomik po osi Z: 800 mm, največja hitrost vrtenja: 6.000 obr/min, dolžina podajanja os X: 455 mm, dolžina podajanja os Z: 430 mm, teža obdelovanca (maks.): 5 kg, skupna višina: 8.500 mm, skupna dolžina: 2.500 mm, skupna širina: 2.495 mm, skupna masa: 8.500 kg, CNC Control: Fanuc FS31IA5 (MAPPS 4) Capabilities Turning length mm: 800 Max. turning diameter mm: ø430 TURNING-MILLING SPINDLE X-axis travel mm: 455 Y-axis travel mm: 800 B-axis index degree: ±120 (0.001º) Max. spindle speed rpm: 12,000 Spindle drive power kW: 9/5.5 Y-axis stroke mm: ±105 Tool magazine Tool positions: 76 Tool holder: Capto C5 Max. tool length mm: 250 Max. tool diameter mm: 70/130 Max. tool weight kg: 5 Lower Turret X-axis travel mm: 160 Y-axis travel mm: 730 Number of tool stations: 10 Main Spindle Max. spindle speed rpm: 6,000 Spindle bore mm: 73 Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Sub Spindle Max. spindle speed rpm: 6,000 Spindle drive power kW: 7.5/5.5 Chuck type: Solid chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal light High-pressure pump Ijdpfjy Rpq Tsx Abxoic Foot switch (dual) for main and sub spindles Coolant pistol Machine run times: Power-on hours: 76,482 Spindle No. 1: 14,010 Spindle No. 2: 4,306 Rated power kVA: 48 Base machine: Dimensions / Weight Length mm: 2,500 Width mm: 2,495 Height mm: 8,500 Weight kg: 8,500

Stanje: rabljeno, Leto izdelave: 1977, Tlak 25 t Izvenos 250 mm Hod 400 mm Površina mize 600x480 mm Površina bata Ø135 mm Višina mize 980 mm Ijdpfxjy Slius Abxeic Teža stroja ca. 1,5 t Potreben prostor ca. 2000x2000x2700 mm Številka stroja: 552677 Dvoročna upravljalna naprava Izklop po hodi in tlaku Dovoljeno samo za varna orodja

Stanje: rabljeno, Guideway and Surface Grinding Machine WMW FRITZ HECKERT Aschersleben Model: SZ 1000 x 1250 x 3000 / 344 Serial No.: 13.2236.2 Year of manufacture: 1989 Nominal grinding range: 3000 x 1250 mm Table clamping surface: 3240 x 1000 mm Maximum grinding length: 3300 mm Machining width: 1250 mm Machining height: 1250 mm Grinding wheel diameter (surface grinding support): max. 600 mm Grinding wheel width (surface grinding support): max. 100 mm Grinding wheel diameter (swivel support): max. 450 mm Electrical connection: 400 Volt, 50 Hz - Swivelling grinding support, drive power 16.5 kW, stepless speed control - Grinding support for surface grinding, drive power 15 kW, stepless speed control - new electrical control system based on SIEMENS S7, installed in 2001 - new electrical control cabinet, separate, year 2001 - Stepless grinding wheel speed adjustment on both grinding supports - Swivelling grinding spindle head for guideway and profile grinding - Swivelling and height-adjustable control panel - Coolant system, freestanding Iiedpfxehv A A Do Abxec - Hydraulic system, freestanding - Oil circulation lubrication, freestanding - Various grinding wheels and mountings included Total required space (L x W x H): 11900 x 7700 x 4600 mm Weight: 45 tons In very good condition

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Ponujamo rabljeni GÜNTNER Hermeticool-Hybrid HC-H 100 S-GFHE 080.5/A-N(S)-G4/2P zračno hlajen povratni hladilnik vode, leto izdelave 2017. Projektna številka: 101048869 Oznaka naprave: S-GFHE 080.5/A-N(S)-G4/2P Serijska številka naprave: 404549442/19.02129 Leto izdelave: 2017 Minimalna temperatura okolja: -30,0 °C Maksimalna temperatura okolja: +50,0 °C Volumen: 116,2 l Dovoljena temperatura (TS) min.: -50,0 °C Dovoljena temperatura (TS) max.: +100,0 °C Preizkusni tlak: 11 bar Hitrost ventilatorja: 2609 obr/min Tok ventilatorja: 22,4 A Isdoy Akgyjpfx Abxjic Če imate dodatna vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Electric dual screwdriving unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit features a pneumatic double stroke actuated via Festo valves and cylinders. Additionally, various monitoring devices are installed for complete automation. Technical data: Electric screwdriver torque: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Power consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Spacing between screwdriving tools: 73 mm - Equipped with a TORX Bit T27 or TP27 (presumably for M6 screws) - Requires a Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 each consist of the following components: Rexroth type Servo motor Rexroth type 0 Planetary gearbox Rexroth type 0 Encoder Rexroth type 0 Straight drive Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material no.: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Power consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive Rexroth Type: 2GA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 – 34 N Tool holder: 1/4" square Max torque: 10 Nm Gear ratio: 1 Iiedpfshxvu Eox Abxoc Weight: 0.2 kg Installation length: 90 mm A 7 m motor connection cable is included. Overall dimensions (W x H x D): approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Stanje: rabljeno, Leto izdelave: 2003, Tlak . t Iztek . mm Hod . mm Maksimalna tlačna sila 63 t Skupna potrebna moč . kW Teža stroja pribl. 4 t Isdpow Syfcjfx Abxsic

Leto izdelave: 1993, stanje: delavnici obnovljeno (rabljeno), leto – 1993 / 2020 popolnoma obnovljen s sistemom PLC vodenja največji premer cevi: 100 mm debelina stene – 10 mm največja dolžina vleka cevi – 6000 / 12000 mm krivljenje s trnom do debeline stene cevi 4 mm; krivljenje brez trna od debeline stene 5,0 do 10 mm Iijdpfxeiau Uuo Abxec natančnost kota krivljenja ± 0,2 ° skupna priključna moč – 50 kW teža stroja pribl. 6 t

Leto izdelave: 2006, stanje: rabljeno, največja debelina roba: 12 mm, hitrost pomika os X: 40 m/min, višina plošče: 60 mm, dolžina plošče: 2.400 mm, širina plošče: 1.000 mm, številka stroja/vozila: 0-202-48-1184, No reserve price – guaranteed sale to the highest bidder! Collection of the machine must take place between 10.06.26 and 30.06.26! The machinery package consists of four machines as follows: Item 1 – KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Movement system with frame Suction cups Item 2 – HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Bonding system: PUR, Laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Max. panel length: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling unit Corner rounding unit Grooving unit Pressure system Panel support guides NC positioning Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically sequenced engagement NC unit positioning Unit 2: Double milling top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm NC positioning Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically sequenced engagement NC positioning Gluing and edging system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel edge Edge processing units Number of edge processing units: 8 Edge processing unit 1: End trimming unit Number of motors: 2 NC positioning Iisdpfx Aoy Ur Hlobxec Edge processing unit 2: Rough trimming top and bottom Number of motors: 2 Edge processing unit 3: Fine trimming for flush and radius milling Number of motors: 2 NC positioning Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change NC positioning Edge processing unit 5: Milling/planing unit Number of motors: 1 Unit 5 motor power: 12 kW Unit 5 speed: 10,000 rpm Automatic tool change NC positioning Edge processing unit 6: Edge scraping blade NC positioning Edge processing unit 7: Glue scraping blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Item 3 – KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Movement system with frame Suction cup system Item 4 – LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return conveyor for edge banding machine Max. panel width: 1,000 mm Max. panel length: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8522

Stanje: novo, SCHUNK DPG 100 paralelni prijemalec SN: 370253 + dodatki DPG 100/1 in DPG 100/1 S, neuporabljen v odprti originalni embalaži, 100 % delujoč, obseg dobave po fotografijah Iiodpfx Aezd I Eyobxoc

Stanje: pripravljen za uporabo (rabljen), Baumüller GSF 100-S servo motor, serial number as per photo, mounting hole spacing: 151 x 151 mm, drive shaft diameter: 32 mm, used, heavy signs of wear, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Iiodpfxoi D E Ele Abxoc

Stanje: pripravljen za uporabo (rabljen), Baumüller GSFG 100-S servo motor, serial number as per photo, mounting hole spacing: 150 x 150 mm, drive shaft diameter: 32 mm, used, heavy signs of wear, 100% functional, scope of delivery as shown in photos. PLEASE NOTE: Please enquire separately for packaging and shipping costs! ATTENTION: Please enquire for charges for packing and transport separately! Iisdoi D E Ewspfx Abxsc