Večnamenski stružnica

MORI SEIKI NTX1000 SZ

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 8.000 obr/min, število osi: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control unit with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle offers a 32-mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It includes an upper tool turret with double drive and a lower turret with nine tool holders. Consider the opportunity to purchase this TRAUB TNL 32 Swiss-type lathe. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; TFT color flat screen; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), thread cutting without compensating chuck, part-off tool breakage monitoring, part-off tool ejection monitoring, axis disabling, T-ATC • Main spindle: motor spindle with hollow clamping system; 32 mm bar/drill capacity; C-axis max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; double drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter spindle operation • Measurement/feedback: glass scales on X axes (upper and lower turret); encoder on C axis • Backworking: 8-position rear station with combined drive for up to 3 tools; ready for internal coolant feed • Clamping: clamping direction reversal device and counter clamping pressure unit on main and counter spindle • Coolant system: standard unit with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), flow rate 19 l/min • Extraction: D 150 mm connection for central extraction system Kodpfxjx D Drcs Abysdr Additional equipment • None specified (no robots, bar feeders, chip conveyors, or external automation listed)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 346 h, število osi: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and a rapid traverse rate of 24 m/min on the X-axis. If you are looking for high-quality turning and milling capabilities, the Hurco CNC TMX 8 MYSi turning-milling center should be considered. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max. turning diameter: 508 mm • Max. turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Max. main spindle speed: 4,500 rpm • Max. sub-spindle speed: 6,000 rpm • Synchronizing spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar pass-through: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Maximum motor current: 32 A • Full load: 58 kVA • Full load current: 83 A Kdedjym T Itepfx Abyjr • Short-circuit resistance: 5 kA RMS symmetric • Interruption capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included; swiveling holders are not included.

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), skupna masa: 3.800 kg, največja hitrost vretena: 600 obr/min, število osi: 5, This 5-axis SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a robust grinding spindle peak power of 16 kW. The machine accommodates a wide range of workpiece sizes with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking for high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we are offering for sale. Contact us for more details. Kdedpfx Abeyiz R Uoyer • Workpiece Carrier A-Axis: Direct drive/hollow shaft motor; Indexing accuracy ±15''; Indexing possibilities 1-999; Cumulative lead error over 100 mm: 8 µm; Max. speed: 600 rpm • Tool holder: ISO 50 • Spindle sleeve clearance: max. 28 mm (automatic clamping: Ø20 mm) • Rated drive power: - Grinding spindle S1-100%: 7.5 kW; peak: 16 kW - X-axis longitudinal travel: 2 kW - A-axis workpiece carrier: 2 kW - Z-axis cross slide: 2 kW - Y-axis grinding head slide (vertical): 2 kW - B-axis grinding head rotation (rotary table): 2 kW • Position measuring systems: - A-axis: direct measuring system - B, X, Y, Z axes: indirect measuring system - Resolution X/Y/Z: 0.0001 mm (0.1 µm) - Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; pre-fusing: separate supply from network • Compressed air: 15-17 Nm³/h; min/max pressure 6/8 bar (600/800 kPa); quality ≥ class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated with included measurement instructions (no marked reference points) Additional Equipment • Workpiece changer options (automation): - Option 1: Pick-up variant - Max. workpiece: Ø20 mm × 120 mm; 1 kg - Capacity per pallet: • Ø3.0-5.0 mm shank: 40 pcs • Ø5.1-8.0 mm: 32 pcs • Ø8.1-11.0 mm: 28 pcs • Ø11.1-14.0 mm: 24 pcs • Ø14.1-20.0 mm: 20 pcs - Option 2: Chain loading magazine (with gripper unit) - Capacity: 64 workpieces - Max. workpiece: Ø32 mm × 200 mm; 2.5 kg - Features: chaotic loading of various workpieces; automatic collet change possible - Clamping sleeves: Ø6, 8, 10, 12, 14, 16, 20 - Option for external chain loader: increases machine weight to approx. 3,800 kg and required space to 3,000 mm × 1,875 mm • Coolant filtration system (TRANSOR): installation by customer; air for backflushing approx. 700 Nl/min for 5 min every 6-9 hours

Stanje: rabljeno, STRUŽNIŠKI CENTER "MORI SEIKI" MOD. ZL 200SMC Z dvojno motorizirano revolversko glavo in kontraspenjalom CNC MSC-501 Dolžina struženja mm 452 Maksimalni premer struženja mm 388 Maksimalni premer nad ležiščem mm 510 Razdalja med konicama mm 751 Vpenjanje vretena A2-6 Hitrost vretena 4.000 vrt/min Moč vretena 11 kW Kdodpfsxwxwtjx Abysr Število orodij 12

Stanje: zelo dobro (rabljeno), Dvojvretena izvedba z osjo C, z osjo Y S pogonjenimi orodji Krmiljenje FANUC/MORI MSX 501 Premer struženja: 190 mm Dolžina struženja: 235 mm Vrtljaji vretena: 50–5.000 min⁻¹ Revolverska držala 1+2 s 16 pogonjenimi pozicijami Os C: 0,001° Kdsdpfjx I A Awox Abysr Podajalnik palic FMB Turbo 8-80 Naprava za prevzem delov Prednastavitveni aparat za orodja Razni dodatki MARCELS MASCHINEN CH

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 503 mm, premer struženja: 190 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 135 mm, pomik po osi Z: 503 mm, moč vretenovega motorja: 11.000 W, hitro pomikanje X-os: 16 m/min, hitri pomik os Y: 6 m/min, hitri pomik na osi Z: 40 m/min, vrsta vhodnega toka: trifazni, vrtilni moment: 75 Nm, skupna masa: 6.200 kg, nos vretena: A2-5, CNC stružnica NAKAMURA-TOME WT100 TEHNIČNE ZNAČILNOSTI: Kdodpszhvwlofx Abyjr Leto izdelave: 2012 CNC krmilje: FANUC 31i-B Razdalja med vreteni: 735 mm Največji premer obdelave: 190 mm Največja dolžina struženja: 503 mm Hod Y-osi: -31 / +31 mm Hod Z1-osi: 503 mm Hod X1-osi: 135 mm Hod Z2-osi: 503 mm Hod X2-osi: 135 mm Hitrost pomika X1-osi: 16.000 mm/min Hitrost pomika X2-osi: 16.000 mm/min Hitrost pomika Z1-osi: 40.000 mm/min Hitrost pomika Z2-osi: 40.000 mm/min Hitrost pomika Y-osi: 6.000 mm/min Vreteno, pritrdilna površina: A2-5" Največji premer palice v vretenu: 42 mm Prehod vretena: 56 mm Največja hitrost vretena: 6.000 min⁻¹ Inkremenat C-osi: 0,001° Moč vretena: 11 kW Navor vretena: 75,4 Nm Proti-vreteno, pritrdilna površina: A2-5" Prehod proti-vretena: 56 mm Hod proti-vretena: 525 mm Največja hitrost proti-vretena: 6.000 min⁻¹ Inkremenat C-osi proti-vretena: 0,001° Moč proti-vretena: 11 kW Navor proti-vretena: 75,4 Nm Največji presek držala orodja: 20 x 20 mm Število orodnih postaj – Revolver 1: 12 Število pogonskih orodnih postaj – Revolver 1: 12 Največja hitrost pogonskih orodij – Revolver 1: 6.000 min⁻¹ Število orodnih postaj – Revolver 2: 12 Število pogonskih orodnih postaj – Revolver 2: 12 Največja hitrost pogonskih orodij – Revolver 2: 6.000 min⁻¹ Moč pogonskih orodij: 7,1 kW Skupna priključna moč: 55,2 kVA Napetost: 400 V Teža: 6.200 kg DODATNA OPREMA: x1 IEMCA BOSS 545 E tip 32 L podajalec palic (kapaciteta palic: 3 m) x1 SMW-AUTOBLOK Mario Pinto PPBE-42 A5 vpenjalna glava s podajnikom (vreteno S1) x1 Vpenjalna glava (vreteno S2) x4 radijalna pogonska orodna držala x2 aksialna pogonska orodna držala x16 statičnih orodnih držal x1 nožni pedal za odpiranje/zapiranje vpenjalne glave x1 pobiralec kosov na zgornjem revolverju s transporterjem x1 transportni trak za odrezke x1 avtomatski sistem za mazanje x1 tribarvna svetilka za prikaz statusa x1 transformator x1 USB ključek za varnostno kopiranje parametrov Stroj je mogoče videti pod napetostjo pri nas po dogovoru. Cena po dogovoru, nakladanje na tovornjak vključeno. Možna dostava po vsem svetu. Podatki so bili pridobljeni po najboljših močeh, zato za točnost ne odgovarjamo. Obdelovalni stroj primerljiv z obdelovalnimi in stružnimi centri ter rezkalnimi stroji blagovnih znamk Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG in Mazak. CNC stružnica, CNC stružni center, CNC obdelovalni stroj, rezkalni stroj, CNC rezkalni center, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm Control Fanuc MSX-701III Maximum turning diameter: 660 mm Ksdpfx Ajy Spuusbyjdr Maximum turning length: 1498 mm Swing diameter over cross slide: max. 400 mm Spindle speed: 3000 rpm Tool magazine with 40 stations Turret with 10 positions Total connected load: 90 kVA Machine weight approx. 26.6 t Space required approx. 5301 x 2997 x 2788 mm Capacity: Swing diameter over cross slide (Tool spindle 1): 750 mm Swing diameter over cross slide (Turret 2): 400 mm Max. turning diameter (Tool spindle 1): 660 mm Max. turning diameter (Turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Axes travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120°, full B-axis 1° indexed and 0.0001° clamped X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (sub spindle): 1610 mm Rapid traverses: (X1, Z1) 50 m/min., (Y, X2, Z2, SZ) 30 m/min. Main and sub spindle: Infinitely variable spindle speeds (Spindle 1 + 2): 30-3000 rpm C-axis (Spindle 1 + 2): 0.001° Main spindle motor: 22/18.5 kW Sub spindle motor: 22/18.5 kW Torque (Spindle 1 + 2): 1000 Nm Disc turret: Number of tool stations: 10 Speed of driven tools: 6000 rpm Drive power: 5.5/3.7 kW Milling spindle: Tool holder: HSK A63 Max. speed: 12000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40 positions Tool diameter: 70/140 mm Tool length: 400 mm Tool weight: 8/10 kg Total connected load: 90 kVA Overall dimensions (L x W x H): 5301 x 2997 x 2788 mm Machine weight: 26.6 t Equipment/Accessories: - Upper milling spindle (B-axis), full 4th axis, positioning 0.0001° - 40-position tool magazine - Lower 10-position turret, all positions driven - 2 x 3-jaw quick change chuck KNCS-N 315/91 - KNOLL high-pressure coolant system, pressure selectable 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter unit - Chip conveyor - Blow-off system for main spindle chuck (M-function control) - Blow-off system for tool cutting edge (M-function control) - Coolant gun incl. accessories - Oil mist extraction - Direct measuring system for X1, X2, Y axis - Bar feeder interface - Dual foot switch for both spindles - Islands and pockets programming for MAPPS - High speed fixed cycle for MAPPS - Program memory extension to 8 MB - Program restart - 3-stage signal lamp - Memory card 512MB (CF Card) - Measuring arm (image) for tool measurement in machine - Tool holder + case, reduction sleeves, driven tools - Jaw set - Collet set

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, premer nad prečnim suportom: 360 mm, maksimalni premer struženja: 366 mm, maksimalna dolžina struženja: 705 mm, prehod pre palico: 80 mm, hitrost vretena: 4.000 o/min, hitrost rezkanja: 10.000 o/min, moč glavnega vretena: 18,5 kW, os C: 0,001 stopinje, os Y: -/+ 50 mm, revolverska glava s 12 postajami. Mori upravljanje M730BM, opremljen z merilcem orodja, transporterjem odrezkov, trivrato vpenjalno glavo, pobiralnikom delov, podajalnikom palic. Ksdpox Eitusfx Abyodr

Stanje: dober (rabljeno), Leto izdelave: 2003, stružna dolžina: 1.505 mm, Turning-milling center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Kdjdpfx Ajwzbq Tebyer Control: Sinumerik Power Line Technical specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs. Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK 63 Lower turret: X-axis: Z-axis: Driven tool speed: Number of turret stations: 12 pcs. Tool holder: VDI 40 Equipment/accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Counter spindle tailstock function - Automatic sliding doors

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen,