Life Tecnologies Onetouch Es nakup rabljenega (9.386)

Stanje: rabljeno, Ta ponudba se nanaša na Life Technologies Ion Torrent OneTouch 2 z OneTouch ES. Sistem Life Technologies Ion OneTouch 2 z Ion OneTouch ES je sestavljen iz dveh modulov: instrumenta Ion OneTouch™ 2 in sistema za obogatitev Ion OneTouch™ ES. Poenostavlja delovne procese z avtomatizirano rešitvijo za pripravo matrik v različnih obsegih in z visoko ponovljivostjo. Uporablja se za DNA sekvenciranje v zdravstvu, laboratorijih in znanostih o življenju. Optimizira celoten potek dela z Ion polprevodniškim sekvenciranjem, kar pomeni znatne časovne prihranke in večjo produktivnost sekvenciranja. Sistem omogoča vzporedno pripravo matrik s hkratnim sekvenciranjem vzorcev na sekvencerjih Ion Proton™ ali Ion PGM™. S tem je mogoče čas od vzorca do zaporedja skrajšati na en dan in omogočiti obdelavo več vzorcev dnevno. Kombinacija Ion polprevodniškega sekvenciranja in sistema Ion OneTouch™ 2 maksimizira hitrost izvajanja vsakega eksperimenta in minimizira skupni čas do zaključka projekta. Modularna zasnova omogoča tudi QC preverjanje Ion Sphere™ delcev, kar izboljša nadzor in uspešnost posameznega eksperimenta. Lastnosti: - Integracija več ročnih postopkov priprave matrik v enoten sistem - Omogoča vzporedno obdelavo več vzorcev dnevno zaradi modularne zasnove - Podpora skalabilni pripravi matrik za vse Ion polprevodniške sekvenčne čipe - Podpora do 400 baz na sistemu Ion PGM™ in do 200 baz na sistemu Ion Proton™ - Vključuje možnost polnega temperaturnega ciklanja za optimizacijo parametrov PCR - Peristaltični črpalni tekočinski sistem izloča potrebo po plinu - Zaradi kompaktnih mer je primeren za katero koli laboratorijsko delovno površino Tehnične specifikacije: - Teža, OneTouch 2: 10,4 kg (23 lbs) - Teža, OneTouch ES: 5,4 kg (12 lbs) - Dimenzije, OneTouch 2: 30 x 41 x 36 cm (12'' Š x 16'' G x 14'' V) - Dimenzije, OneTouch ES: 24 x 32 x 28 cm (9,5'' Š x 12,5'' G x 11'' V) - Delovna vlažnost: 20–80 % (brez kondenzacije) Dodpfxexzg Ubj Aplokl - Delovna temperatura: 15–25 °C - Multiplex zmogljivost: do 384 vzorcev s črtno kodo - Visokoprepustna združljivost: avtomatizirani protokoli, multiplexing, visokoprepustna uporaba - Napajanje: 100–240 VAC, 50/60 Hz, maks. 5,5 A

Stanje: rabljeno, Ta oglas je za Life Technologies Ion Torrent OneTouch ES. Enota ne vključuje sistema Ion Torrent OneTouch ES. Gre za komponento za obogatitev v okviru sistema za amplifikacijo templata in pripravo vzorcev Ion OneTouch 2. Napajanje: 110-240VAC, 50/60Hz, 0,5A. Dksdpfx Aexzg T Roplel

Stanje: rabljeno, Dieses Inserat bezieht sich auf ein Life Technologies Ion Torrent OneTouch 2 Gerät. Das Ion OneTouch 2 Instrument übernimmt die Template-Amplifikation als Teil des manuellen Workflows für die Ion PGM, Ion Proton, Ion S5 und Ion S5 XL Systeme. Es bietet skalierbare Template-Vorbereitung für alle Ion Halbleiter-Chips. Das kompakte Gerät lässt sich problemlos auf jeder Laborarbeitsfläche platzieren. Für einen vollautomatisierten Workflow empfehlen wir das Ion Chef Instrument. Dkedoxzg T Dopfx Aplol Das Ion OneTouch ES Anreicherungsmodul ist in diesem Angebot nicht enthalten. Das Angebot gilt nur für das Ion OneTouch 2 Instrument (ohne ES Modul). Effizienz und Flexibilität Das Ion OneTouch 2 Instrument integriert mehrere manuelle Schritte der Template-Vorbereitung in ein einziges System. Durch das modulare Design ermöglicht es die parallele Bearbeitung mehrerer Proben pro Tag. Es ist flexibel und unterstützt die skalierbare Template-Vorbereitung für alle Ion Halbleiter-Sequenzierchips: bis zu 400 Basen auf dem Ion PGM, bis zu 200 Basen auf dem Ion Proton System, bis zu 400 Basen auf den Ion 520 und Ion 530 Chips sowie bis zu 200 Basen auf dem Ion 540 Chip. Der Bedarf an Gas entfällt durch die Verwendung einer peristaltischen Pumpe. Leistungsstarke Technologien Im Kern des Ion OneTouch 2 Instruments stehen drei innovative Technologien zur Verfügung, die die automatisierte Bereitstellung der Template Ion Sphere Partikel ermöglichen. Erstens sorgt der Reaktionsfilter für die Bildung von Millionen Mikroreaktoren, in denen die klonale Amplifikation erfolgt. Zweitens der vollintegrierte Thermocycler mit einer Einweg-Amplifikationsplatte, der robuste Temperaturzyklen der Mikroreaktoren sichert. Drittens die integrierte Zentrifuge zur Rückgewinnung der Template Ion Sphere Partikel. Zusammen ermöglichen diese Funktionen hochparallele klonale Amplifikation und Rückgewinnung in kompakter Bauweise für den Labortisch.

Stanje: zelo dobro (rabljeno), Ponujam profesionalne hidravlične cilindre – razpirala HURST – Jaws of Life, ki se uporabljajo pri tehničnem reševanju (gasilci, reševalne službe). Djdpfx Aoyxta Ijplokl Oprema ugledne blagovne znamke HURST Rescue Systems (ZDA) – vodilni proizvajalec hidravličnega reševalnega orodja. Stanje: Oprema deluje brezhibno, preizkušena. Popolnoma funkcionalna – pripravljena za delo. Vidne so običajne sledi uporabe (praske, umazanija – vidne na slikah), ki ne vplivajo na delovanje. Podatki: Proizvajalec: HURST Rescue Systems Tip: hidravlični cilinder / razpiralo Uporaba: tehnično reševanje, gasilska služba Vključeni hitri hidravlični priključki Komplet vsebuje: 2x hidravlični cilinder HURST Hidravlične cevi (kot na slikah) Področja uporabe: gasilske enote (prostovoljni/profesionalni) cestno reševanje hidravlika servisi in delavnice. CENA JE NAVEDENA ZA 1 KOS

Stanje: rabljeno, Polnilec Dkjdpoynpwyefx Aplol

Stanje: rabljeno, Polnilec Dedpfxsynpwte Aplokl

Leto izdelave: 2011, stanje: dober (rabljeno), Newmix Atmi Life Sciences Djdpfx Aped Tw Izeljkl Dvoplaščni mešalnik z lopaticami 15883-005 Leto 2011, nerjavni farmacevtski mešalnik s 500L mobilno posodo s dvojnim plaščem, upravljanje preko zaslona na dotik, minimalna - maksimalna temperatura 0-90 °C, volumen plašča 6L, enofazni priklop

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, REZALNIK ES-300 ASTD, MOSTNI REZALNIK ZA REZANJE MARMORJA, GRANITA IN KERAMIKE, MOD. ES-300 A Z AVTOMATSKIM PREMIKANJEM OSI X IN Z, ZADNJI OMEJEVALEC S KOLESOM IN 2 PROSTO VRTLJIVIMA VALJEMA. Dkjdpfx Aey Dch Eoplel

Stanje: rabljeno, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2014, Leto izdelave: 2014, Oprema: ABS, * ES-GE 3-STL nizkopodna prikolica * Prva registracija: 04-2014 * ABS * Kolesne vdolbine * Krmilna os * Lastna teža: 7.690 kg Dksdpfx Aoy Hzrneplel * Več slik in videoposnetkov prek WhatsApp * Podatki brez garancije, vmesna prodaja pridržana.

Stanje: rabljeno, Leto izdelave: 2007, Extendable body: Yes Dkjdoyrtm Hepfx Aplel Please contact Theo Lelie for further information.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2007, skupna dolžina: 13.400 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17.5, medosna razdalja: 9.800 mm, barva: bela, Leto izdelave: 2007, Oprema: ABS, SAF axle. 2 x steered trailing axles. Extendable. Lifting roof. Sliding roof. Loading bed length: 910 cm. Floor height: 80 cm. Neck length: 390 cm. = Further information = Axle configuration Tire size: 205/65R17.5 Brakes: drum brakes Suspension: air suspension Dedpey N Aw Rjfx Aplokl Rear axle 1: twin tires; tire tread left inner: 30%; tire tread left outer: 30%; tire tread right inner: 30%; tire tread right outer: 30% Rear axle 2: twin tires; tire tread left inner: 30%; tire tread left outer: 30%; tire tread right inner: 30%; tire tread right outer: 30% Rear axle 3: twin tires; tire tread left inner: 30%; tire tread left outer: 30%; tire tread right inner: 30%; tire tread right outer: 30% Rear axle 4: twin tires; tire tread left inner: 40%; tire tread left outer: 40%; tire tread right inner: 40%; tire tread right outer: 40% Weights Unladen weight: 9,940 kg Payload: 37,660 kg Gross vehicle weight: 47,600 kg Identification Type number: 4STL48 / 4 AXLE / SLIDING ROOF / = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We do our best to provide accurate information, but no rights can be derived from the published texts.

Stanje: rabljeno, največja dovoljena obremenitev: 69.060 kg, skupna masa: 84.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2013, naslednji pregled (TÜV): 07/2026, skupna širina: 2.540 mm, Oprema: ABS, Celotno zalogo vozil, ki so na voljo takoj ali v kratkem času, najdete na naši spletni strani. Izvleček iz opreme. Celoten seznam opreme je na voljo na zahtevo. • Šasija iz visokokakovostnih QSTE drobnozrnatega jekla, s centralnim nosilcem, ni teleskopska Dodpfey Ikbhsx Aplskl • Pritrdilne zanke, pritrdilna sila približno 100 kN na zanko, zložljive • 4 pari žepov za stebre v območju nakladalnih stojal, približno 80 x 80 mm • Hidravlične opore (elektro-hidravlične) • 6 x 11.000 kg (tehnično), SAF osi • Zračno vzmetenje • 1. os vodilna, 2. os toga • 3. – 6. os prisilno vodene • Tridec krmiljenje • Dodatno krmiljenje • Nato vtičnica • 1. os dvižna • Pnevmatike 265/70R19.5 • 3,5-palčni zatič, zamenljiv • Wabco ABS/EBS zavore • Jeklena sprednja stena, približno 400 mm visoka • 2 stranski steni na labodjem vratu • Barvanje enobarvno v RAL 3000 rdeči barvi

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Life Technologies Amex 1000 Evos XL Core digitalni mikroskop Povečave: 4x, 10x, 20x Dimenzije: pribl. 410mm x 320mm (D x Š) Višina: pribl. 550mm Letnik: 2016 Vljudno vabljeni na ogled naprave. Po želji vam lahko organiziramo ugodno dostavo prek prevozniškega podjetja. Prejeli boste ustrezen račun. Za tuje stranke lahko izdamo tudi neto račun; pogoj je veljavna ID za DDV. Vmesna prodaja pridržana. Obiščite našo trgovino in si oglejte tudi druge ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih imetnikov in so uporabljena izključno za identifikacijo in opis izdelkov. Dedpfx Apeyx A Smelskl Odstopanja v tehničnih podatkih in napake v opisu so možne in pridržujemo si pravico do sprememb.

Stanje: dober (rabljeno), Polar Mohr 78 ES rezalnik papirja Stroj v zelo dobrem stanju, servisiran in pripravljen za uporabo. Izdelan v Nemčiji. Tehnične specifikacije: Širina reza: 780 mm Višina kupa: 120 mm Dkedpsywdq Iefx Aplsl LCD zaslon Napajanje: 400V Teža: 1400kg Stranske mize Kromirana površina mize Osvetlitev mize in optična rezalna linija Neomejeno nastavljiv pritisk Dodatni zadnji pokrovi mize Rezervni nož, rezalne letve, kladivni blok in orodje za uporabo.

Stanje: rabljeno, lastna masa: 9.140 kg, največja dovoljena obremenitev: 28.860 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2007, dolžina tovornega prostora: 11.600 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: v tranzitu / na poti, 2 osi, zračno vzmetenje, zadnja os vodilna, ABS (protiblokirni sistem), razširljiv do 3 m, pritrdilna ušesa, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, podpore, dvojna montaža pnevmatik. Nadgradnja: 2-osna nizkopodna polprikolica s hidravličnimi rampami. Vse informacije brez garancije, ker je polprikolica v tranzitu! Podatki o dodatni opremi brez garancije, spremembe, vmesna prodaja in napake pridržane! Dkjdpfsyzgndox Aplsl

Stanje: novo, največja dovoljena obremenitev: 15.825 kg, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles, including units available for immediate or short-term delivery, on our website. Excerpt from equipment specification. Full equipment details available upon request. Chassis: * Steel welded construction made of welded longitudinal beams and punched Z-cross members, close cross member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly under the load floor, two insertion slots for one ramp each, with locking plate in the rear header frame Underride guard: * According to EC regulations Front landing gear: * Single-sided operated landing legs Rear support: * Two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, manufacturer SAF, drum brakes approx. 300 x 200 mm, hub-centered wheel fixing for twin tyres, ABS, total air suspension travel approx. 200 mm (raise approx. 140 mm, lower approx. 60 mm), operated by hand lever with ratchet function Tyres: * 8 units, 235/75R 17.5 – make as per our choice, on steel rims 6.75 x 17.5, fitted with offset Splash protection: * PVC spray guards in front of and behind axles, EC compliant Dkjdpfey Auhbex Apljl Load securing: * On the outer frame approx. every 150 mm a hole for lashing straps, tensile strength approx. 2.5 t (lashings can be hooked in with side walls closed, bevelled outer frame) * 6 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 8 t * Stake pockets for removable stanchions 80/50: 3 pairs of stake pockets on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EC regulations with EBS * Two spiral hoses as connection to the towing vehicle with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame Front wall: * Made from 25 mm removable front board Lighting system: * Lighting in accordance with EC regulations, 24 volt, multi-chamber tail lights, number plate lights, side marker lights and lane control lights at the rear, connection plate on the left of the drawbar including connection cable with 15-pin and two 7-pin plugs Accessories: * 2 wheel chocks with holders * Removable warning beacon at the rear * Additional 40 mm coupling device supplied (max. GVW 13,500 kg) * Rear extension approx. 800 mm including underride guard, extendable loading platform with load capacity approx. 2 t, locking positions every approx. 200 mm * Mechanically adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolt-on towing eye approx. 50 mm as per DIN 74053 * 4 rows of crosswise stake pockets evenly distributed across the loading platform * 12 removable stanchions made of galvanized pipe, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for one 20’ container, container locks extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair aluminum ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 pieces of 25 mm side walls and a rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm), includes side wall holder at front wall Paintwork: * Chassis shot-blasted, cleaned, and hot-dip galvanized to latest standards * Structure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized & RAL 3002 carmine red * Side walls: RAL 3002 carmine

Stanje: novo, največja dovoljena obremenitev: 32.155 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, with immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details on request. Chassis: * Welded construction made from high-quality steel profiles with punched cross-members. Designed for high point loads. Coupling Device: * Fifth wheel plate with 2-inch kingpin. Underrun Protection: * In accordance with EC regulations, bolted design. Side Protection: * In accordance with EC regulations. Landing Legs: * 2 x 12 t landing legs with compensating foot and single-side operation (right side in driving direction). Axles: * 3 x 9 t air-suspension axle assemblies, SAF make, with disc brakes approx. 430 x 45 mm, centrally aligned wheel connection ET120, ABS, total air suspension lift approx. 180 mm (lift approx. 110 mm, lower approx. 70 mm). * Air suspension control via manual regulator with stop function. Steering: * Last axle steered automatically by rod linkage. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Brake System: * Dual-circuit compressed air brake system in accordance with EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, swap-proof coupling heads fixed to the front cross member, without connecting line to the truck. * Manufacturer: Wabco. Tyres: * 6 x, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in driver’s cab (pre-installed by chassis manufacturer). Mudguards: * In accordance with EC, 1/4 PVC fenders in front of and behind the axle assembly. Load Securing: * 9 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 8.0 t each). * 8 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 2.5 t each). * On the outer frame, holes every approx. 500 mm for lashing straps (lashing straps can be hooked in with side boards closed; chamfered outer frame). Stanchion Pockets: * 10 pairs of stanchion sockets on the outer frame, evenly distributed. * 4 rows of stanchion sockets across the loading area. * Plug-in stanchions: 20 pieces, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm. * Rack inside front wall for 20 plug-in stanchions. Front Wall: * Reinforced steel construction, fixed, lined inside with approx. 9 mm phenolic plywood (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor fitted into the outer frame. Dedpfoy Auhzox Apljkl Sideboards: * 4 x 250 mm side boards and rear wall made from anodized aluminium hollow profiles, folding down and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under the chassis. * Insertion rails for sideboards and stanchions on left and right. Lighting System: * In accordance with EC, 24 volt with multi-chamber lamps, LED side marker lamps, LED position lights front white, LED contour lights rear, number plate lights. * 1 x 15-pin and 2 x 7-pin socket connectors on front cross member. Equipment: * Wheel chocks with double holder. * Warning signs according to ECE 70. * Work spotlight on lamp bracket (actuated via reverse gear). * Bracket for beacon at rear, including beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paintwork: * Chassis and front wall cleaned by sandblasting, primed and top-coated in single colour. * Chassis: hot-dip galvanized + RAL colour of your choice. * Front wall: RAL colour of your choice. * Sideboards: anod

Stanje: novo, največja dovoljena obremenitev: 16.180 kg, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, skupna širina: 2.480 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and soon-available stock on our website. Excerpt from the features list. Full specification available on request. Chassis: * Welded steel construction with welded longitudinal beams and perforated Z-cross members, closely spaced cross members for high floor load capacity * Ramp compartment: between the longitudinal beams, behind the axle assembly underneath the loading floor, two insertion pockets for one each loading ramp, with locking plate in the rear headframe Underrun Protection: * According to EU regulations Landing Gear: * Front: landing legs with one-sided operation * Rear: two adjustable drop supports Axles: * 2 x 10 t air suspension axle assembly, manufacturer SAF, drum brakes approx. 300 x 200 mm, center-aligned for twin tires, ABS, total air suspension stroke approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), operated via hand lever with detent function Tires: * 8-fold, 235/75 R17.5 – our choice of brand. Mounted on 6.75x17.5 wheels with offset Spray Protection: * PVC, in front of and behind the axles, according to EU regulations Load Securing: * On outer frame, approx. every 150 mm, a hole for lashing straps, tensile strength approx. 2.5 t * 6 pairs of foldable lashing rings evenly distributed, tensile strength approx. 8 t * Stake pockets for slip-in stakes 80/50: 3 pairs of stake pockets in the outer frame, evenly distributed Brake System: * Compressed air brake system as per EU standards with EBS * Two spirals as connection to the towing vehicle with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor sunk into the outer frame Lighting System: * Lighting system as per EU standards, 24 volts, multi-chamber tail lights, license plate lights, side marker and track marker lights at the rear, connection plate on the left drawbar, incl. interconnection cable with 15-pin and 2 x 7-pin connectors Dkjdpfx Ajy Auf Toplel Accessories: * 2 wheel chocks with holder * Removable flashing beacon at the rear * 40 mm towing device supplied (max. gross weight 13,500 kg) * Rear extension approx. 800 mm including underrun protection, extendable loading platform with load capacity approx. 2 t, locking positions every 200 mm * Mechanically length-adjustable rigid drawbar, 6 x approx. 100 mm, with bolted towing eye approx. 50 mm as per DIN 74053 * 4 rows of crosswise stake pockets across the load floor, evenly distributed * 12 galvanized steel stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20’ container * Container locks for 1 x 20’ container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technical standards * Superstructure parts cleaned, primed, and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 9011 graphite black * Outer frame: hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Add-on parts: galvanized / KTL black

Stanje: novo, največja dovoljena obremenitev: 39.070 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from specifications. Complete specification available upon request. Chassis: * Welded construction made of high-quality steel profiles with punched cross-members. Designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Djdpfx Apsyz E T Selekl Coupling Device: * 2-inch kingpin (also suitable for 3.5-inch reception) Underride Guard: * In accordance with EC regulations, bolted design Side Impact Protection: * In accordance with EC regulations Landing Legs: * 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S foot Axles: * 3 x 9 t air suspension axle assembly, manufacturer: SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheels, offset 120 mm, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary valve with locking function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on lifting/lowering device bracket * Smartboard/TIM/Infocenter, no TPMS display Lift Axle: * First axle liftable, fully automatic load-dependent lift control, starting aid via button in the cab (15-pin socket PIN12). Button in cab is not included in delivery Brake System: * Two-line compressed air brake system according to EC guidelines with EBS and RSS, automatic load-sensing, spring-loaded cylinders as parking brake, non-reversible coupling heads fixed to front cross-member, without connecting line to motor vehicle, Wabco brand Tyres: * 6-fold, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), offset 120 mm * Basic version tyre pressure monitoring, connected to the EBS CAN bus system * Tyre pressure display in the cab (pre-installed by tractor manufacturer) Mudguards: * In accordance with EC, PVC mudguards (semi-shell) over all axles * Mud flaps with anti-spray Load Securing: * 8 pairs of welded hook plates in the outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings on the sides of the outer frame, evenly distributed (tensile strength approx. 10 t) Stake Sockets/Posts: * 5 pairs of stake sockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake sockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 removable posts made of galvanized square tubing, approx. 80 x 80 x 4 mm, stop at bottom Front Wall: * Bolted front wall, approx. 1,200 mm high, panelled with sheet metal Stake Magazine: * Magazine for removable posts inside front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting System: * EC-compliant, 24 volt with multi-chamber lights, LED side marker lights, LED front position lights white, LED rear outline marker lights, license plate lights * 1x15-pin and 2x7-pin sockets on the front cross-member Equipment: * Warning panel according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for revolving beacon at rear (including beacon) * 1 rear access ladder, foldable and extendable (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of front wall * Smartboard with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the support legs (switched via revers

Stanje: rabljeno, številka stroja/vozila: W09BLH3556EE32123, Leto izdelave: 2006, Contact Theo Lelie for further information. Dodpfx Ajy Dgkqoplskl

Stanje: rabljeno, Dieses Angebot betrifft den FluidX IntelliXcap 96 Dekapper/Recapper. Das Gerät befindet sich in einwandfreiem, betriebsbereitem Zustand und ist sofort einsatzfähig. Es wurde für die effiziente, automatisierte Handhabung von 96er-Probenröhrchen entwickelt und verbessert die Prozessgeschwindigkeit sowie Konsistenz, während es den manuellen Arbeitsaufwand in Hochdurchsatz-Laborumgebungen reduziert. Transparenzbericht und Technische Prüfung: • Herkunftsnachweis: Biotech-/Forschungseinrichtung • Zustand: Direkt vom Labortisch (dekontaminiert/original) • Funktionstest: Bestätigt; Digitaldisplay aktiv, Beleuchtung funktionsfähig, Lüftersystem in Betrieb • Integrität: 100 % Originalteile (nicht überholt) Djdsy Hq Apjpfx Aplskl Software- und Medienhinweis: Als Direkt-vom-Labor-Angebot sind eventuell enthaltene Original-Softwaremedien oder Zubehörteile im Lieferumfang als Service enthalten. Lizenzhinweis: Softwarelizenzen oder -schlüssel werden nicht bereitgestellt, übertragen oder garantiert. Für Software-Lizenzierung, Registrierung und Kompatibilität der Arbeitsstation ist der Käufer über den Hersteller verantwortlich. Beschaffungshinweis: Das Gerät wird wie besehen verkauft. Wir prüfen den Einschaltstatus und die physische Unversehrtheit, führen jedoch keine analytische Validierung, Fluidiktests oder operationelle Kalibrierungen durch. Ideal für Labore mit eigenem technischem Know-how oder bestehendem Wartungsvertrag. Nachhaltigkeitshinweis: Durch die Wahl von direkter Wiederverwendung vermeiden Sie den CO₂-Fußabdruck der Neuproduktion und verhindern, dass Spezialmaterialien in den Abfallstrom gelangen. Die direkte Weitergabe ins Labor ist der kohlenstoffeffizienteste Weg, ein modernes Labor auszustatten.

Stanje: zelo dobro (rabljeno), Hydraulic motor for screw conveyor Injection unit size ES3550 Dkedpsfnqagofx Apljl Hägglunds Drives type CA50 20 2 0 0 N 004

Stanje: novo, največja dovoljena obremenitev: 63.960 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment features. Full equipment details available upon request. Chassis: * Welded construction made from high-quality steel profiles with punched cross members, designed for high point load capacity * Outer frame: UNP steel Towing device: * 2-inch king pin Underrun protection: * In accordance with EC regulations, bolted design Side impact protection: * In accordance with EC regulations Landing legs: * Landing legs with single-side operation, support load approx. 66 t/lifting capacity approx. 24 t Axles: * 5 x 10 t air suspension axle assemblies, SAF brand, with drum brakes approx. 400 x 200 mm * ABS * Centrally located 10-hole wheel connection with offset ET 0 * Total air suspension lift approx. 200 mm, raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with lock function Steering: * 1 axle self-steering at the front, 2nd axle fixed, 3rd, 4th, and 5th axle forced steered via linkage * Centralized lubrication points positioned externally Axle lift: * First and second axles can be raised automatically, with additional deactivation on the chassis Brake system: * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, Wabco 4S/3M brand * Spring chamber cylinders as parking brake, anti-mistake coupling heads permanently mounted to the front panel, without connection line to the tractor unit * Aluminium air reservoirs Tyres: * 10 x 445/65 R22.5 164J on 11.75 x 22.5 ET 0 rims – Manufacturer of our choice TPMS: * Tyre Pressure Monitoring System (TPMS) according to ECE R141, with data transmission to the tractor unit Mudguards: * In accordance with EC, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axle each front and rear with a 1/4 PVC mudguard * Rear mudguards with spray flaps Load securing: * 5 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 14 t) * 11 pairs of hook plates welded into the outer frame (lashing capacity approx. 3 t) * 10 pairs of side lashing rings welded into outer frame, evenly distributed (lashing capacity approx. 8 t) Stake pockets: * 10 pairs of stake pockets recessed into the outer frame * 6 pairs of stake pockets recessed into the floor (on the outer longitudinal frame) Insertable stakes: * 16 galvanized insertable stakes, approx. 80 x 80 x 8 mm, approx. 850 mm usable length Stake magazine: * One magazine for 8 insertable stakes (approx. 80/80 mm) on each side in front of the front wall Front wall: * Bolted corner posts, filled with aluminium hollow profiles, internally with a steel impact plate over full width and height Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame, flush-mounted Dkodpfx Apjwx Dcaelol Lighting system: * According to EC, 24 Volt with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline lights rear * Number plate lights 1x15 and 2x7-pin connector at the front panel Equipment: * Two wheel chocks with holder * Warning panel as per ECE 70 * Work spotlight on light carrier (activated by reverse gear) * Holder for rotating beacon at the rear (including beacon) * Fixed access ladder on both left and right, including plug-in step * Smart Board * Sticker: "Vehicle swings out" and load center of gravity indication Paintwork: * Chassis and front wall blast-cleaned and high-quality top-coated * Chas

Stanje: novo, največja dovoljena obremenitev: 56.570 kg, skupna masa: 66.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Extract from the equipment features – full specifications available upon request. Chassis: - Chassis frame construction made of welded longitudinal beams and pass-through cross members - Rear under-run bar approx. 700 mm wide - Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams - Cross member spacing max. 400 mm (for longitudinally laid floor) - King pin 3.5 inch according to SAE standard, replaceable - Outer frame as UNP 200, open to the outside Landing Gear: - 24 t telescopic landing gear JOST -MODUL CH (Heavy Duty) S-foot Axles: - 4 x 10 t SAF axles with large drum brake - 22.5 single tires - Axle distances approx. 1,700/1,810/1,810 mm - Air suspension unit, each with 10 t lifting capacity, lifting and lowering device with 1 rotary slide valve Knorr/Wabco - Holder for lifting and lowering device, bolted version Brake: - Smartboard/TIM/Infocenter at the lifting/lowering gear bracket, in addition to the lift/lower valve, without battery (operable only with towing vehicle) - Holder for light and brake at the front, mounted on the underrun bar, total height approx. 700 mm - Tire pressure monitoring basic version, connected to the EBS CAN bus system - With dual release valve for brake and spring actuator - Test nipple for brake cylinder pressure at right front brake cylinder - 1 red and 1 yellow coupling head each - Lifting/lowering device mounted in driving direction rear left - EBS braking system Wabco make, CAN bus EBS diagnostics (EBS plug), no diagnostic cable led outside! Tires: - 8 x 445/65 R 22.5 premium brand tires of our choice - Central centering Lubrication: - Grease nipple strips at the bogies and at the steering front. No central lubrication Superstructure: - Without body certificate according to DIN EN 12642 XL - 2x LED work lights on top of the front wall (facing rear), switch at the lift/lower bracket - Front wall for platform, reinforced version - Side contour marking yellow, rear yellow - Front wall approx. 800 mm high, with sheet metal cladding, bolted version Lighting: - 2x LED work lights, mounted in lamp panel, switched via reverse gear - 2x LED work lights, switched via reverse gear, 1 each side near landing gear - 2x LED reversing lights, 1 per side in front of the 1st axle - Lighting/wiring system brand of our choice - Number plate lighting - The towing vehicle must provide sufficient electrical capacity for the chosen lighting (esp. reversing light) - Position marker lights at the front, lower, white, 1 per side left and right (LED) - 24V lighting system with large multifunction rear lamp Dsdpewx Dctefx Aplskl - Side marker lights (LED) flashing - 1x 15-pin and 2x 7-pin sockets in multifunction box at the front - EBS socket output - 1 pair lane keeping lights (LED) Floor: - Hardwood floor approx. 28 mm, alternating with galvanized omega steel profiles Paint/Coating (no metallic shades): - Chassis painted in RAL color of choice - Front wall (steel construction) in RAL color of choice - Axle hubs matching chassis color - Axles and landing gear black - Wheels in aluminum/silver similar to RAL 9006 - Wheel nuts untreated - Under-run protection painted RAL 9010 pure white (aluminum) Accessories: - Lifting device for 1st axle - 9 welded lashing plate hooks per side in the outer frame, lashing capacity max. 3,000 daN each - 12 RUD-SLP lashing points per side with

Stanje: novo, največja dovoljena obremenitev: 34.350 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Partial list of equipment. Full equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with reinforced crossmembers, designed for high floor and point loads, with heavy-duty outer frame * Rear loading floor as steel welded construction, with two welded-in external drive tracks made from 5-hole steel sheet (Lohr/Rolfo hole pattern system), approximately 2,250 mm long, hydraulically lowerable by approx. 350 mm * Rear of the vehicle features an integrated loading platform, extendable by approx. 1,500 mm hydraulically; steel welded construction with 5-hole steel sheet cover (Lohr/Rolfo hole pattern system), integrated lights, two ramp storage compartments, and ramp supports * Rear end drive and control via electrical-hydraulic power pack, mounted in a stainless steel box on the left side of the chassis, with radio remote control * Power supply from the tractor unit’s vehicle battery (NATO socket on the front wall, without connecting cable to the truck) Coupling Device: * 2-inch king pin, replaceable from below Underride Protection: * Fixed installation as per EU regulations Landing Legs: * 2 x 12 t support legs with 2-speed gear Axles: * 3 x 9 t air-suspended axle units * SAF brand with disc brakes approx. 370 x 45 mm * ABS * 10-hole centrally located wheel bolt circle, ET120 * Total air suspension stroke approx. 310 mm, with lift approx. 220 mm and lowering approx. 90 mm * Air suspension control via hand lever with stop function Lifting Axle: * 1st and 3rd axles can be lifted automatically, also manually via control at the chassis frame or via PIN 12 of the light socket Tyres: * 6 units, 445/45R19.5, fitted on 14.00x19.5 rims, 10 holes, ET120 Mudguards: * As per EU standards, 1/4 PVC mudguards * 1st axle front and rear; 2nd and 3rd axles rear Brake System: * Wabco brand * Dual-circuit braking system in accordance with EU regulations, with EBS and automatic load-dependent control * Spring-actuated parking brake active on 2 axles * Reversed coupling heads solidly mounted on front crossmember, no connection line to truck Lighting Equipment: * As per EU standards, 24 Volt * Multi-chamber tail lights * Number plate lights * LED side marker lights * White LED position lights at the front and LED lane marker lights at the rear * 15-pin socket and 2x7-pin sockets firmly attached to the front crossmember, no connecting lines to truck Load Securing: * 9 pairs of foldable lashing rings evenly distributed, traction approx. 8 t * 8 pairs of foldable lashing rings evenly distributed, traction approx. 2.5 t * 2 pairs of foldable lashing rings at the rear, traction approx. 2.5 t * On the outer frame, holes for lashing straps every approx. 500 mm Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pocket Sockets: * 8 per side recessed into the outer frame * 4 rows of sockets transversely across the loading area Floor: * Approx. 28 mm Z-hardwood floor, recessed in outer frame Front Wall: * Solid front wall * Storage for 16 plug-in stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders Dkedpewt Iylefx Aplel * 2x PVC toolbox, approx. 600/400/500 mm * Rear rotating beacon holder incl. beacon * 2 LED reversing lights (at rear) * 2 aluminum loading ramps, approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair