Kreuzmayr 6000 Liter nakup rabljenega (8.482)

Leto izdelave: 2020, stanje: novo, Designed as a plug-and-play complete system mounted on a mobile stainless steel base plate with juice pump, featuring a 63 kW Wolf oil-fired boiler, 2 heat exchangers, pasteurization section for approx. 20–30 seconds with automatic control, consisting of: heating circuit, heating circuit pump, and expansion vessel; 2 plate heat exchangers for juice preheating/cooling and heating up to 80°C; 24 m pasteurization section; automatic pneumatic temperature control. Rcjdpfxecx R Dds Alted Capacity: 5,000 liters of juice per hour (depending on inlet juice temperature).

Leto izdelave: 2020, stanje: novo, 1000 l/h Stainless steel frame on 4 adjustable feet Minimum/maximum level sensor in the pressure tank Stainless steel pressure vessel The product is pushed into the tank via a multi-nozzle head; Product pump: Non-return valve at the product inlet Sight glass at the product inlet CO2 pressure regulating valve for installation on the CO2 bottle Sight glass in the pressure vessel Max. pressure: 6 bar incl. electronic control Rsdpfx Aecx Smbeltscd incl. pressure boosting pump

Stanje: rabljeno, Opis: CTS klimatska preizkusna celica CW-60/6 Temperaturno območje: -60°C do +120°C Prostornina: 6000 litrov (6 m³) Temperaturno odstopanje: ±0,5 do 1 K časovno Ogrevanje: 1 K/min od -40 °C do +80 °C Hlajenje: 1 K/min od +80 °C do -40 °C Temperaturno območje: +10 °C do +95 °C Razpon vlage: 10 % do 85 % rel. vlage Območje rosišča: +5°C do +89 °C Rcsdpfoygr E Rox Alted Temperaturno odstopanje: ±0,5 K časovno Odstopanje vlažnosti: ±1 do ±3 % r.v. časovno Notranje dimenzije: Prostornina: približno 6.000 litrov (6 m³) Približne notranje mere: Višina: 2000 mm, Širina: 2000 mm, Globina: 1500 mm

Stanje: novo, 🧰 Lastnosti izdelka • Stanje: novo • Barva: siva • Prostornina: 650 l • Nosilnost: 4000 kg (pri 5 °C) • Lastna teža: 43 kg • Dolžina: 120 cm • Širina: 100 cm • Višina: 78 cm • Možnost zlaganja: Da Rsdpfxohvrk Tj Altocd • Ohranja obliko: Da • Posebnosti: primerno za skladiščenje na paletah, odporno proti tekočinam, možen odtočni ventil 💰 Cena: 155 € neto, brez DDV • Popusti za večje količine: na zahtevo • Stroški pošiljanja: po vsej Evropi, na zahtevo • Čas dostave: na voljo takoj • Ogled in prevzem: možen kadar koli po dogovoru Nenehno imamo na zalogi več kot 5000 tekočih metrov paletnih regalov številnih proizvajalcev. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, specifikacijah in cenah ter do predčasne prodaje! Glejte naše splošne pogoje poslovanja, vse cene so brez DDV, ob dostavi iz skladišča.) Lenox Trading – vrhunska skladiščna oprema in regali za težke obremenitve, rabljeni in novi Opis: Iščete visokokakovostne skladiščne regale za nakup? Lenox Trading je z okoli 100 lastnimi zaposlenimi eden največjih trgovcev z novo in rabljeno skladiščno opremo v celotnem območju DACH (Avstrija, Nemčija, Švica). ⚡ HITRO DOVOLJOVO: • Več kot 10.000 tekočih metrov regalov je na voljo takoj • 20.000 m² skladiščnih ploščadi in jeklenih konstrukcij je takoj na voljo • Vsak teden 30–50 tovornjakov s tovorom za največjo izbiro 📦 NAŠA PONUDBA (UGODEN NAKUP V SPLETU): Ne glede na to, ali iščete paletne regale, regale za težke obremenitve, visoke regale, regalne police, regale za pnevmatike ali regale za IBC-kontejnerje – dobavljamo in montiramo po vsej Evropi z našo lastno ekipo! Vključno z načrtovanjem CAD, transportom, demontažo in montažo. 🏭 VRHUNSKE ZNAMKE, RABLJENE IN IZ LIKVIDACIJE/STEČAJA: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tip MPB, tip E, regali za težke obremenitve Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Regali s konzolami (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠA DRUGA PODROČJA POSLOVANJA: SPLETNE AUKCIJE IN LIKVIDACIJE Pri demontaži in izpraznitvi ponujamo pravo celovito rešitev: 1. Pavšalni nakup: nakup blaga, opreme in celotnih zalog, vključno z izpraznitvijo. 2. Prodaja s provizijo: izvedba dražb v našem imenu. Naše celovite storitve, ki jih izvajajo naši zaposleni: katalogizacija, priprava pisarne, pregled, izročitev blaga, logistika, razstavitev in izpraznitev. Ne glede na to, ali ste na nas naleteli prek regale za težke obremenitve ali iščete pocinkane regale za težke obremenitve / regalne sisteme za težke obremenitve – zagotavljamo najboljše pogoje. Obrnite se na nas za neobvezujočo ponudbo!

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 100-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit is also equipped with a fixed-mounted water separator, which removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation, our safety cut-off system is included. This system starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. The pressure blasting unit is delivered fully assembled, operational, and space-saving in a mesh box. Only the compressed air supply needs to be connected and the unit filled with blasting media. Transport can be carried out conveniently using a forklift or pallet truck. For protective clothing, spare parts, etc., a lockable aluminum storage box is installed. Scope of delivery includes: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently installed - 1" water separator, permanently installed - SAPI safety cut-off system - Blasting media sieve - Cover - 10 m blasting hose ø 25x7 mm, fully assembled - Silicon carbide venturi long nozzle, available in 6 mm, 8 mm, or 10 mm diameter - RED 2 sandblasting helmet - Sandblasting overall (nylon/cotton) - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled - SAF breathing air / activated carbon filter - Wear parts kit consisting of: - 100 tear-off visors for RED 2 - 10 inner lenses for RED 2 - 1 blasting hose coupling 25x7 mm nylon - 2 rubber seals for blasting hose coupling - 1 nozzle holder 25x7 mm - Mesh box with blasting hose holder - Lockable aluminum box Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Rigid 1" piping (internal and external) Rcodpswc Ri Iofx Altod - Rubber-coated metal cone with rubber seal - Large handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 100 l - Total height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight: approx. 75 kg Mesh box dimensions: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight incl. all accessories: 260 kg

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The blasting unit is also equipped with a permanently mounted water separator, which removes moisture from the compressed air and prevents the blasting medium from clumping due to excessive moisture. For safe operation of the sandblasting equipment, our safety shutoff is included. This starts and stops the blasting process by actuating the hand lever, which is mounted on the blasting hose. The scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - 1 1/4" pressure regulator, permanently installed - 1 1/4" water separator, permanently installed - SAPI safety shutoff Technical data pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate Rcedewc Rk Eepfx Altjd - Fixed piping 1 1/4" inside and outside - Rubber-coated metal cone with rubber seal - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Total height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shutoff - Fastest switching times while complying with trade association regulations (VBG 48) - Pressure settings can be precisely adjusted before blasting – continuously adjustable from 0.1 – 12.0 bar - Reduced blasting media consumption, as the pressure vessel remains constantly pressurized with no unnecessary run-on - Upon restarting, full blasting pressure is instantly available at the nozzle – no pressure build-up required → lower consumption & less hose wear - No condensate forms in the vessel, as it remains pressurized at all times → no venting or aeration at each start/stop - Optimal media dosing with hardened fine-dosing valve - Lower compressed air requirement → noticeably reduced diesel consumption - Single-person operation possible, as the pressure can be read and adjusted directly at the manometer – even without starting - No failure-prone components such as control valves, membranes, or seals → maintenance-friendly and reliable in operation - Only the blasting hose in the safety shutoff needs to be checked and replaced if necessary

Stanje: novo, Our SAPI pressure blasting unit, type 'Mammut', with a 60-litre vessel capacity, is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the integrated pressure regulator. A water separator is also permanently installed on the blasting unit; this removes moisture from the compressed air and prevents the blast media from clumping due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off is included. This initiates and stops the blasting process by actuating the hand lever mounted on the blast hose. The scope of delivery includes: - SAPI pressure blasting unit 'Mammut 60 L' - 1" pressure regulator, permanently mounted - 1" water separator, permanently mounted - SAPI safety shut-off Technical data - Pressure Blasting Unit: - Precisely adjustable from 0.1 to 12 bar - TÜV certified with certificate - Fixed piping 1" internal and external - Rubber-coated metal nozzle with rubber seal - Large maintenance opening - Chassis with rubber wheels - Media dosing valve (suitable for all common blasting media) - Tank capacity 60 l - Total height 1,130 mm - Tank diameter 360 mm - Overall diameter 700 mm - Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off: - Fastest on/off times, fully compliant with occupational safety guidelines (VBG 48) - The pressure setting can be precisely adjusted prior to operation: continuously adjustable from 0.1 to 12.0 bar Rsdjwc Afhopfx Altocd - Reduced abrasive consumption as the pressure vessel remains under pressure, preventing unnecessary discharge of media - Upon restarting, full blast pressure is immediately available at the nozzle, eliminating build-up time—thus, significant reduction in both media consumption and wear on the blast hose - No moisture (condensate) forms inside the vessel, as it remains pressurised at all times and is not vented with each start/stop. Additional benefits include: - Optimum media dosing via hardened precision valve - Lower compressed air requirement, significantly reducing fuel (diesel) consumption - One-person operation, as vessel pressure is constantly indicated and can be adjusted via the pressure gauge without needing to start the device first - No sensitive components such as control valves, membranes or gaskets—resulting in low maintenance and reliable operation. Only the blast hose within the safety shut-off needs to be checked and replaced if necessary.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.220 kg, največja dovoljena obremenitev: 24.780 kg, skupna masa: 33.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/1986, Leto izdelave: 1986, Good condition 29,000 litres Rjdpswkdnmefx Altscd 1 compartment DST 29/V2A

Stanje: rabljeno, Leto izdelave: 2018, Pregled Ponujena polnilna linija za vrečke je bila zasnovana pri švicarskem podjetju in dobavljena leta 2018. Glavni proizvajalec je Linapack. Linija je bila uporabljena le za sezonsko proizvodnjo (2 meseca na leto), zato so delovne ure zelo nizke. Ker prodaja ni več naraščala, se je prodajalec odločil linijo prodati in ukiniti proizvodnjo. Linija je še vedno sestavljena in jo je mogoče ogledati. Možno je polniti različne formate vrečk in izvajati vroče polnjenje do 85°C. Trenutni lastnik jo je uporabljal za koktajle, sicer pa je primerna tudi za različne druge brezalkoholne pijače. Tehnične podrobnosti Rodpfxevptt Rs Altocd - Zmogljivost: - 50 vrečk/uro, odvisno od volumna - 750 - 900 l/h - Dimenzije vrečk: - Širina: 80 - 180 mm - Višina: 100 - 300 mm - Temperatura polnjenja: 71 - 85 °C - Siemens PLC Linija je sestavljena iz: - 1.000 l vmesnega tanka - Mešalnik - Merilec pretoka - Nadzor nivoja - Čistilna pršilna glava - Integrirano v nadzor pasteurja - Linija za kratkotrajno pasterizacijo Kreuzmayr PAS-900 - Zmogljivost: 750 - 1.000 l/h - Ogrevanje s paro - Popolnoma avtomatska - Avtomatsko čiščenje z: - Vroča voda - Para - Kislina - Lug - Z cevnim toplotnim izmenjevalnikom - Avtomatski polnilni stroj Linapack LFS-1000 Duplex - s Siemens PLC - Sedem-postajni sistem - Motoriziran podajalnik z Pick-and-Place sistemom za dovod vrečk - Odpiranje vrečk z vakuumskim prijemalom - Polnilna enota z merilcem pretoka in temperaturnim senzorjem, samodejno izločanje pri prenizki temperaturi - Zatesnitev vrečk - Zatesnitev vrečk - Hlajenje zatesnitve - Prazenje vrečke - Kontrolna tehtnica - Hladilnik in sušilec za vrečke - Hladilna kopel z vodo - Z UV-sijalkami za razkuževanje - Sušenje z ventilatorjem, pet šob - Transportni trakovi in zbirna miza

Stanje: rabljeno, Materialni rezervoar - 6.000 litrov V2A, cena: 1.650 €, kontaktna oseba: gospod Rainer Eckerle Rcsdpfx Alobbkhnetsd

Leto izdelave: 2025, stanje: novo, Kreuzmayr fruit drying cabinet OTS 11, 11 m² drying surface, electrically heated, with temperature and humidity control, connected load 7.5 kW, full stainless steel construction, suitable for drying fruit, vegetables, meat, etc. Rcsdpsb Ipxwefx Alted

Leto izdelave: 2025, stanje: novo, Fruit belt press with a belt width of 1250 mm Hourly capacity up to 10,000 kg, depending on fruit type and ripeness 27 rollers, all-stainless steel construction with pre-juice extraction zone, main press roller profiled and enclosed, main press zone with 7 press rollers, high-pressure pressing zone with 6 press rollers, 2 post-press rollers Belt cleaning with rotary brushes and high-pressure water jet Infinitely variable speed control Rjdpfxobpz D Ae Altecd Removable dosing box, powered dosing roller, height-adjustable Overall height 2.7 m

Leto izdelave: 2025, stanje: novo, Machine length: 1,500 mm Working width: 560 mm Capacity: up to 2,000 kg/h Standard features: - Rubber lining at infeed and outfeed - Chassis with swivel and fixed wheels - Height-adjustable frame (infeed height: 1,000–1,200 mm / outfeed height: 630–830 mm) - Corrugated brushes - Stainless steel construction Rcjdjcx R D Hopfx Altsd - Fresh water spray unit Water consumption: 5 l/min at 5 bar Power: 1.1 kW Dimensions (L x W x H): 1,550 x 1,000 x 1,750 mm Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2025, Pre-installed mobile complete unit with impeller juice pump, high-efficiency boiler, heat exchanger, and automatic control system. 41 kW gas boiler Circulation pump Pressure compensation tank Automatic temperature control Tube-in-tube heat exchanger With LPG version includes gas bottle holder and gas pressure regulator Output: 500 liters of juice per hour, heating from 10°C to 80°C Rcodpjb Ilnysfx Alted Weight: 450 kg Filler not included

Leto izdelave: 2025, stanje: novo, Kreuzmayr fruit drying cabinet OTS 22, 22 m² drying area, electrically heated, with temperature and humidity control Rsdpfxjb Iztue Altecd connected load 7.5 kW, fully stainless steel construction for drying fruit, vegetables, meat, etc.

Leto izdelave: 2020, stanje: novo, Pre-installed mobile complete unit featuring an impeller juice pump, efficient boiler, heat exchanger, and automatic control system, consisting of: Chassis mounted on 2 fixed and 2 swivel castors 160 kW WOLF gas boiler Circulation pump Expansion vessel Rcodpfscl Shvjx Altod Automatic temperature control Stainless steel plate heat exchanger (1.4401) In the liquefied gas version: including gas bottle holder and gas pressure regulator Capacity: 2,000 l juice/hour Weight: approx. 1,000 kg

Leto izdelave: 2025, stanje: novo, Disc slicer for fruit and vegetables Rcsdpfx Aeykg Njltjd manual operation stainless steel design disc thickness approx. 6.5 mm (other thicknesses available on request) Fruits up to a diameter of 110 mm can be easily sliced in one stroke.

Leto izdelave: 2025, stanje: novo, hydraulic large box tipping unit for fruit bulk bins suitable for 1.2x1.0 m boxes lifting capacity 500 kg discharge equipped with control slide gate Rcedpfeykhbjx Altsd stainless steel construction

Leto izdelave: 2025, stanje: novo, Capacity up to 2000 kg/h Mill motor 3.0 kW Elevator motor 0.37 kW Infinitely variable speed control via frequency inverter Automatic start-stop control for the elevator via 3-rod probe in the mash box of the subsequent machine (press, mash pump, etc.) Rceds Hmtdepfx Altjd Stainless steel construction on 4 wheels (2 swivel, 2 fixed castors) Dimensions (LxWxH): 3100x675x2200 mm Mash discharge height: 1310 mm Weight: 230 kg Integrated foldable sorting table Central floor drain for wash water (ø75 mm)

Leto izdelave: 2020, obratovalne ure: 30 h, stanje: novo, Semi-automatic filler for hot or cold filling of fruit or vegetable juices or other liquids into bag-in-box pouches with Vitop or Postmix closures. Rsdpfx As Uwrqsltjcd Consisting of: - Feed tank with level monitoring - Pneumatically actuated filling valve - Stainless steel design with 4 swivel castors - Filling volumes from 3 to 20 l pouch capacity - Filling output for 10 l pouches: approx. 2,000 l/h - Filling output for 5 l pouches: approx. 1,200 l/h The filling process is monitored by a built-in flow meter and controlled via a pneumatic valve. Pre-evacuation of pouches Optionally available with nitrogen overlay after filling Optionally available with 4- or 6-head inline filling configuration

Leto izdelave: 2020, obratovalne ure: 20 h, stanje: kot nova (razstavni stroj), The mobile units are used for on-site processing of fruit juices. The fruit is unloaded from the large box tipper into the washing tank, transported to the mill, ground, and then fed to the belt press. The produced juice is automatically pumped into tanks, heated to approximately 80 degrees Celsius in the pasteurization unit, and filled into Bag in Box containers. Rjdoc Rghyjpfx Altecd The following machines are installed on the trailer: • Large box unloading unit Kreuzmayr GKE • Washing elevator Kreuzmayr KWEM 2000 • Single-belt press Kreuzmayr KEB 750 with cleaning brush • Large juice pan for KEB 750 • Movable pomace conveyor belt made entirely of stainless steel • Stainless steel always-full tank 530 l with immersion sieve • Pasteurizer Kreuzmayr Pas 1500 liters oil • Bag in Box filler Kreuzmayr KBF 2000 special design for the mobile plant • Accessories such as pumps, compressed air compressor, high-pressure cleaner, hoses, and connectors • Trailer with tarpaulin body, compressed air braking system, and ABS The trailer has very low operating hours and is therefore in like-new condition.

Leto izdelave: 2025, stanje: novo, Rated capacity 3000 kg/h (depending on fruit type & operating conditions up to 6000 kg/h possible) Yield up to 75% Belt width/length: 1000 mm / approx. 7000 mm Working width/height: 900 mm / 0–50 mm, continuously adjustable Belt speed continuously adjustable: 1.0–5.2 m/min Electrical connection: drive motor 2.2 kW 400V Washing arm motor 0.25 kW 400V Water consumption: 3 l/operating minute Weight: approx. 2300 kg Dimensions LxWxH: 2750x1890x1690 mm Rsdpfx Aeygmwsltscd without high-pressure cleaner and without compressor

Leto izdelave: 2025, stanje: novo, consisting of: - Trailer - Washing elevator KWEM 1000 - Belt press KEB 400 - 2 x 220 l tanks with immersion sieve - Pasteurizer PAS 500 oil - Bag-in-box filler KBF 2000 for mobile unit - Accessories such as pumps, air compressor, high pressure cleaner, ... Rsdpfx Alecl Tq Ujtecd

Leto izdelave: 2020, stanje: novo, Deaerator is used for the elimination of air bubbles from the puree. The air bubbles become mixed with the puree during the straining process. Made from stainless steel. Deaeration takes place in a vacuum vessel. Operating temperature approximately 50°C. A water ring pump is integrated to generate a vacuum in the vessel. The puree is drawn in by the pasteurizer pump. Level sensors are included to measure the inflow and outflow of the liquid. Rodocl Tt Rspfx Altecd Power supply: 400V / 50 Hz / 16A Power consumption: 2.2 kilowatts Water supply: approximately 100 l/h

Leto izdelave: 2025, stanje: novo, For emptying fruit and vegetables from wooden or plastic crates into a washing system, onto a sorting belt, or into a water bath. The discharge volume from the crate can be regulated via a stepless hydraulic tipping mechanism and a dosing slide gate. Filling the large crate tipper can be done using a forklift or pallet truck. Rsdpfx Aecl Tx Doltecd Standard version: Lifting capacity: up to 550 kg per crate Drive motor power / electrical connection: 2.2 kW; 240 V, 3-phase, 60 Hz Weight: 350 kg Dimensions: 1680 x 1420 x 1255 mm Discharge width: 500 mm Tilting cycle time: 15 seconds.