Krauss Maffei 650 Gx Sp 3000 (2018) nakup rabljenega (21.346)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, vpenjalna sila: 6.500 kN, Spannkraft: 650 t Schneckendurchmesser: 80 mm Schussgewicht: 1170 g Abstand zwischen den Holmen (vertikal): 960 mm Abstand zwischen den Holmen (horizontal): 1110 mm Schussvolumen: 1.284 cm³ Maschinentyp: Horizontal Antrieb: Hydraulisch Guedpfx Ajy Eyxdedkof --- Spritzgießmaschine – KM 650 GX Einspritzeinheit: SP 3000 Schneckendurchmesser: 80 mm Schließeinheit Klemmkraft: 6500 kN Werkzeughaltekraft: 455 kN Plattenmaße (H × V): 1.540 × 1.440 mm Holmenabstand (H × V): 1.110 × 960 mm Max. Werkzeughöhe: 1.450 mm Werkzeugeinbauhöhe (min./max.): 450 / 1.000 mm Öffnungshub: 1.000 mm Auswerferhub: 250 mm Auswerferkraft (vor/zurück): 95 / 49 kN Spritzeinheit Schneckendurchmesser: 80 mm L/D-Verhältnis: 21,3 Einspritzdruck: 1.538 bar Schussvolumen: 1.284 cm³ Schussgewicht (PS): 1.170 g Einspritzrate: 141 cm³/s Einspritzgeschwindigkeit: 133 mm/s Einspritzleistung: 60 kW Plastifizierleistung (PS): 139 g/s Heizleistung installiert: 36 kW Düsenrückzugskraft: 7 kN Antrieb und Energie Installierte Pumpenleistung: 90 kW Trockencykluszeit (EUROMAP 6): 3,0777 s Trockencykluszeit (KM-Norm): 2,5555 s Maschinenmaße und Gewicht Abmessungen (L × B × H): 8,03 × 2,88 × 2,45 m Eigengewicht: 12.000 kg Max. Werkzeuggewicht: 11.000 kg Öltankkapazität: 1.180 l

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Oprema: dokumentacija / priročnik, KraussMaffei KM650-4300 GX Machine Clamping force kN: 6500 Tie bar spacing (h x v) mm: 1110 x 960 Mould opening stroke mm: 1450 Minimum mould height mm: 450 Maximum mould height mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (HPS-M mixing) L/D ratio: 20 Injection pressure bar: 1839 Shot volume cm³: 2290 Control version: MC5 Screen language: German Gsdpfoy Apdqsx Adkouf Condition: tested, operational Equipment: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Full insulation of the plasticizing cylinder for reduced energy consumption - 2 x pneumatic valve on moving mounting platen for blowing function - 2 x pneumatic valve on fixed mounting platen for blowing function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner - Conveyor control - Mechanical robot interface to EUROMAP 18 - Hydraulic ejector plate including threaded holes and through holes in moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, 1-fold on moving platen - Pneumatic core pull system, 1-fold on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for "plasticizing" signal at HAN 3 A socket - Switching to holding pressure depending on cavity pressure (Kistler) - Quality statistics - Chip card reader unit - Graphic display and analysis package with 10 charts - Trend graphics - PV control - Interface for production data consisting of 5 potential-free contacts in control cabinet - 3 freely programmable inputs and outputs in control cabinet KraussMaffei Linear Robot LRX 350: - Fully integrated control - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demoulding stroke: 1200 mm - Maximum payload: 35 kg

Stanje: pripravljen za uporabo (rabljen), Brizgalni stroj pripada hidromehanski dvoploščni seriji, sila zapiranja: 550 t, delovni čas: približno 80 ur, opremljen s sistemom za manipulacijo Krauss Maffei KM 250/LRX-S 250. Ogled stroja je možen na kraju samem, stroj se nahaja v Mehiki. Guedpfezrn Hmox Adkjf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 420-3000 CX Year of manufacture: 2011 Control system: MC5 Clamping unit: Clamping force: 4200 kN Tie bar clearance (h x v): 900 x 800 mm Mounting platen dimensions (h x v): 1400 x 1250 mm Min. mould height: 780 mm Maximum daylight between platens: 1400 mm Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Injection volume: 1608 cm³ Shot weight (PS): 1464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Gjdpfx Adoydbbveksuf Nozzle contact force: 129.4 kN Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pull control – moving platen 1 x hydraulic core pull control – fixed platen Masterbatch dosing unit control 14 GK zones Electrical and general data: Pump motor power: 75 kW Installed heating power: 36 kW Power supply: 400 V / 50 Hz Oil quantity: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Stanje: rabljeno, Krauss Maffei main board Gusdpfx Aju Axihjdksf

Stanje: novo, Leto izdelave: 2025, Vpenjalna sila: 1600 t Gujdoy Umpuopfx Adkjf Premer vijačnega bata: 70 mm Masa brizga: 1490 g Razdalja med stebrički V: 1420 mm Razdalja med stebrički H: 1870 mm Prostornina brizga: 1232 cm³ Tip: Horizontalen Pogon: Hidravlični

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, vpenjalna sila: 3.500 kN, premer vijaka: 70 mm, injekcijska masa: 998 g, Ta Krauss Maffei KM 350-3000 je bila izdelana leta 2003. Ima zapiralno silo 3500 kN in maksimalni gib odpiranja 920 mm. Stroj je zmožen predelave različnih materialov, kot so PA, PP, PE in ABS. Če iščete visokokakovostne zmogljivosti brizganja, razmislite o naši hidravlični brizgalni stiskalnici Krauss Maffei KM 350-3000, ki je na voljo za prodajo. Za dodatne informacije nas kontaktirajte. • Prostornina hoda: 1097 cm³ • Obdelovani materiali: PA, PP, PE, ABS • Temperatura cilindra: do 450 °C Gsdpfx Adsyyxmvokjuf • Sila odpiranja orodja: 220 kN • Dvižna sila (premična plošča): odpiranje 105 kN / zapiranje 95 kN • Maks. hod odpiranja: 920 mm • Min. višina orodja: 380 mm • Maks. odprtina orodja: 1300 mm • Dimenzije plošč za orodje (Š x V): 1060 x 1095 mm • Razdalja med stebri (Š x V): 710 x 710 mm • Hod izmetalca: 250 mm • Sila izmetalca (naprej/nazaj): 95 / 49 kN • Maks. teža orodja: 4950 kg Dodatna oprema • Sistem za rokovanje: Wittmann robotski sistem (2013) z naslednjimi hodi robota (X/Y/Z): 420 / 1200 / 2000 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 70.936 h, vpenjalna sila: 4.200 kN, premer vijaka: 80 mm, This Krauss Maffei 420 - 4300 CX hydraulic injection molding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Please check the possibility to purchase this Krauss Maffei 420 - 4300 CX hydraulic injection molding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Minimum mold installation height: 380 mm • Opening stroke: 1020 mm • Daylight (distance between platens): 1400 mm • Max. mold weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS) • Shut-off nozzle: 2-stage hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Shot volume: 1810 cc • Shot weight (PS): 1647 g Gjdpfx Aeyhby Hodkjuf • Injection rate (PS): 498 g/s • Plasticizing rate: 106 g/s • Screw L/D ratio: 22.5 • Nozzle radius: 12 mm • Armored injection unit: Yes Additional equipment • KM linear robot, year of manufacture: 2021 • Hot runner control, 12 zones • Mold sensors: Priamus (p=2 / t=0)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, vpenjalna sila: 4.200 kN, premer vijaka: 80 mm, injekcijska masa: 1.464 g, skupna višina: 2.500 mm, skupna masa: 25.500 kg, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, največja dolžina izdelka: 7.300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. The robust hydraulic injection molding machine from Germany features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. With a dry cycle rate of 1200 cycles/h, it is ideal for high-volume production. Contact us for further information about this machine. • Electrical Data: • Power supply: 400 V / 3N~ / 50 Hz Guodpfxeydnp Hj Adkjf • Installed heating capacity: 36 kW • Rated power of pump motor: 75 kW • Number of barrel heating zones: 7 • Performance and Control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping Unit: • Mold opening force: 249.6 kN • Tie bar distance: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen size: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Moving platen opening stroke: 1400 mm • Injection Unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 46.424 h, vpenjalna sila: 3.500 kN, premer vijaka: 80 mm, proizvajalec krmilnikov: KRAUSS MAFFEI, model krmilnika: MC5, Hidravlični stroj za brizganje iz leta 2012. Ta Krauss Maffei 350-3000 CX ima zapiralno silo 350 t in premer polža Ø 80 mm. Nudi zmogljivost brizganja PP 640 g in največjo odprtost orodja 1260 mm. Če iščete visokokakovosten stroj za brizganje, priporočamo Krauss Maffei 350-3000 CX, ki ga imamo na voljo za prodajo. Za več informacij nas kontaktirajte. Gsdpey S Tvvofx Adkjuf • Kapaciteta brizganja PP: 640 g • Minimalna dimenzija orodja: 380 mm • Razdalja med stegni: 710 × 710 mm • Največja odprtost orodja: 1260 mm

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 Gsdpfx Adew U N Ixokjuf • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: novo, Gre za nove, neuporabljene rezervne dele. Krauss Maffei MC 5 prikazovalnik M5V121, nov, neuporabljen. Kupljen za Krauss Maffei stroj z zmogljivostjo 2300 ton. Prikazovalna enota M5, 12-mestna, dimenzije D x Š x V 310 x 360 x 60 mm, teža 3600 g. Gjdpoygucfsfx Adkeuf

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Na voljo je popolnoma hidravlični, velik dvoplatinski stroj za brizgano oblikovanje Krauss Maffei z linearnim robotom LRX350. Sila zapiranja: 6500 kN, brizgalna enota: SP3000, premer vijačnega valja: 70 mm, razmerje L/D: 22,9, maks. brizgalni tlak: 2389 bar, prostornina enega stiskanja: 1232 cm³, teža enega odlitka: 1121 g, pretok vbrizgavanja: 462 cm³/s, hitrost vrtenja vijačnega valja: 285 vrt/min, zmogljivost plastifikacije: 108,6 g/s, sila pritiska šobe: 129 kN, sila odpiranja orodja: 345 kN, hod odpiranja orodja: 1150 mm, min. višina vgradnje orodja: 600 mm, maks. širina odprtine: 1750 mm, hod izmetalnika: 250 mm, sila izmetalnika: 95 kN, maks. teža orodja: 11400 kg, notranja širina: 1200 mm/1120 mm, dimenzije pritrdilne plošče X/Y: 1510 mm/1370 mm. Nosilnost robota: 35 kg, pot gibanja X/Y/Z: 1200 mm/2000 mm/4000 mm, dimenzije tekočega traku X/Y: 2500 mm/800 mm, višina odlagališča: 1000 mm, maks. temperatura traku: 70 °C. Dimenzije stroja X/Y/Z: približno 8000 mm/3000 mm/2700 mm, teža: približno 31 t, delovni čas: približno 75900 ur. Dokumentacija je na voljo. Ogled na licu mesta je možen. Predvidoma bo na voljo od novembra 2026. Gsdpfezqfwyjx Adksuf

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Na voljo je velikofomratni brizgalni stroj Krauss Maffei. Zapiralna sila: 6500 kN, razdalja med stebri X/Y: 1000 mm / 930 mm, dimenzije pritrdilnih plošč X/Y: 1530 mm / 1450 mm, maks. hod odpiranja: 900 mm, območje višine orodja: 350 mm - 650 mm, maks. razmik plošč: 1550 mm, hod izmetalca: 250 mm, izmetna sila: 110 kN. Dimenzije stroja X/Y/Z: ca. 10000 mm / 2800 mm / 2450 mm, teža: ca. 46000 kg. Priložena je manipulatorna enota Wittmann. Dokumentacija na voljo. Ogled na lokaciji je možen. Gujdpszc Rd Dsfx Adksf

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), A total of 9 partially dismantled Krauss Maffei injection moulding machines are available: 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical components. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical components. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical components. Gedpfougmx Asx Adksuf All injection moulding machines are supplied with robots from Kuka, Krauss Maffei, SAR, or Sepro. Documentation is available. On-site inspection is possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Krauss Maffei Injection Moulding Machine KM 350-3000 CX Year of manufacture: 2017 Fully hydraulic clamping system. MC6 control system based on an industrial computer using real-time Ethernet technology, equipped with an integrated 19-inch control panel featuring a colour touchscreen, LED backlighting, and visualisation of all ongoing processes (ProcessDesigner). Plasticising unit Complete plasticising unit for thermoplastics, abrasion-resistant version, with an 80 mm screw diameter, non-return valve and open nozzle. TECHNICAL DATA – STANDARD VERSION Clamping unit Clamping force: 3500 kN Opening force: 221 kN Platen dimensions (h x v): 1060 x 1095 mm Tie bar clearance (h x v): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould height: 380 mm Maximum daylight: 1300 mm Ejector stroke: 250 mm Godpfx Asy Tp Rljdkouf Ejector force forward/backward: 95/49 kN Injection unit Screw diameter: 80 mm L/D ratio: 20.0 Injection pressure: 1855 bar Shot volume: 1608 cm³ Shot weight: 1464 g Injection speed: 95 mm/s Injection rate: 478 cm³/s Standard screw speed: 220 rpm Plasticising capacity: 109.5 g/s Electrical-hydraulic equipment Pump motor rated power: 75 kW Installed heating power: 36 kW Number of heating zones (barrel): 7 Dry cycle time / stroke as per Euromap 6: 2.3 s / 497 mm Oil tank capacity: 720 l Dimensions and weight Net weight including control cabinet: 16.3 t Machine dimensions (L x W x H): 7.21 x 2.17 x 2.25 m

Stanje: skoraj kot novo (rabljeno), Plasticizing unit Krauss Maffei CX machine screw diameter: 50 mm injection volume: 432 ccm shot weight: 393 g practically new – only used for testing in the tool shop Gsdpfx Adov R Ucpokouf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Fabricant : Krauss Maffei Type : KM 650-3500-700 CZ Année de fabrication : 2007 Commande : MC 4 Guodpfx Adezgwbceksf Unité de fermeture : Force de fermeture : 650 t Course d’ouverture : 1150 mm Hauteur minimum d’installation du moule : 600 mm Distance maximale entre plateaux : 1750 mm Entraxe colonnes (h x v) : 1100 x 900 mm Dimensions des plateaux (h x v) : 1510 x 1370 mm Centrages (buse – plateau éjecteur) : 200 / 200 mm 1ère unité d’injection : Diamètre de vis : 80 mm Poids de dose max. en PS : 1400 g Volume de dosage : 1543 cm³ Pression d’injection : 2205 bar 2ème unité d’injection : Diamètre de vis : 45 mm Poids de dose en polystyrène : 278 g Volume de dosage : 305 cm³ Pression d’injection : 2336 bar Accessoires : 2 électrovannes Cascade 16 voies 3 tirages de noyaux sur plateau mobile 3 tirages de noyaux sur plateau fixe 20 zones de régulation pour canaux chauds Interface robot : Euromap 67 Dimensions : Poids total : 34 500 kg Dimensions totales (L x l x h) : 7,8 x 2,5 x 2,5 m Heures de fonctionnement : 45 400 h La machine peut également être utilisée comme machine monocomposant (1K).

Stanje: rabljeno, Leto izdelave: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Guedpfxew Hwthj Adkef

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, Clamping Unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Opening width: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit: Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Stroke volume: 1,097 cc Shot weight (PS): 998 g Gjdpov Stbmsfx Adkjuf Injection flow rate: 393 cc/s Screw speed: 218 rpm Plasticizing throughput: 83 g/s Nozzle contact force: 173 kN Electrohydraulic Equipment: Rated power of pump motor: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 Dimensions and Weights: Space requirement (approx.): 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Accessories: Oscillation elements Additional Equipment: - 1 x air valve - 8-way pneumatic cascade control - Accumulator - 2 x hydraulic core pulls on BWAP - 2 x hydraulic core pulls on FWAP - Robot interface according to EUROMAP 67

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Godetunccjpfx Adkeuf Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS (g/polystyrene) Clamping force: 6,500 kN Machine weight approx.: 32 t From series production

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Stock no. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Control type: MC 3-F Screen language: German Location: D-52249 Eschweiler Clamping Unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen size (H x V): 1,704 x 1,700 mm Clear distance (H x V): 930 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum opening width: 1,750 mm Ejector stroke: 250 mm Ejector force fwd/rev: 226 kN Injection Unit: Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Stroke volume: 6,172 ccm Shot weight (PS): 5,617 g Injection flow rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing throughput: 238 g/s Nozzle contact force: 246 kN Electrohydraulic Equipment: Godpfxsub S R Hj Adkeuf Pump motor rated power: 132 kW Installed heating capacity: 70 kW Cylinder heating control zones: 7 Dimensions and Weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Accessories: - Vibration damping elements Additional Equipment: - 1 x air valve - 2 x hydraulic core pulls on BFAP - 2 x hydraulic core pulls on FFAP - 8 x hot runner controllers - Robot interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 6,500 kN Maximum mold opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Clamping platen (H x V): 1,520 x 1,470 mm Clear daylight (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force (forward/backward): 95 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 cc Shot weight (PS): 3,064 g Injection flow: 690 cc/s Screw rotation speed: 153 rpm Gusdpsx Hzzcjfx Adkef Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 50 kW Number of temperature control zones for barrel heating: 7 Dimensions and weights: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Accessories: - Vibration dampers - Krauss Maffei robot LR300 X axis: 1,200 mm, servo-driven Y axis: 1,000/1,000 mm, telescopic, servo-driven Z axis: 3,500 mm, servo-driven C axis: 0 - 90° pneumatic - Conveyor belt - Safety enclosure Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control - 12 hot runner controllers - 2 x hydraulic core pulls on the moving platen (BWAP) - 2 x hydraulic core pulls on the fixed platen (FWAP)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, tlak vbrizgavanja: 2.389 letvica, hod izmetalca: 135 mm, odmični hod: 1.825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate dimensions (H x V): 1,520 x 1,470 mm Daylight opening (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Maximum opening width: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw rotational speed: 218 rpm Plasticizing capacity: 83 g/s Nozzle contact force: 173 kN Guedpfoycqc Tsx Adkjf MACHINE DETAILS Dimensions & Weight Floor space (approx.): 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated pump drive power: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 FEATURES Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulator 2 x hydraulic core pulls on moving platen 2 x hydraulic core pulls on fixed platen Robot interface according to EUROMAP 67

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2004, Krauss-Maffei KM 650-3500 C 1 650 t Krauss-Maffei injection moulding machine, year 2004, with only approx. 45,000 operating hours in automatic mode. The machine will be delivered fully refurbished. REFURBISHED MACHINE Equipment: - 6 pneumatic cascade valves - 24 hot runner zones - 1 core puller on the fixed platen - 1 core puller on the moving platen - Electric screw drive Technical specifications: - CLAMPING FORCE: 6,500 kN - PLATEN SIZE: 1,540 x 1,440 mm - CLEARANCE BETWEEN BARS: 1,110 x 960 mm - MAX. MOULD OPENING STROKE: 1,150 mm - DAYLIGHT OPENING: 1,750 mm - SCREW DIAMETER: 90 mm - MIN. MOULD INSTALLATION HEIGHT: 600 mm - YEAR OF MANUFACTURE: 2004 - SHOT VOLUME: 1,953 cm³ Gedpfjhy Nnbox Adkouf - SHOT WEIGHT: 1,777 g - INJECTION PRESSURE: 1,742 bar