Konrad Rump Oberflächentechnik Gmbh & Co 20-W-1500-4 nakup rabljenega (118.230)

Leto izdelave: 2012, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9332067, VALJČNI TRANSPORTER - POGRADNA STROJNA LINJA ZA PESKANJE PROIZVAJALEC: RUMP TIP: 20-W 1500-4 Proizvajalec: Rump Klodpfsy Entisx Aqqjt Tip: 20W-1500-4 Letnik: 2012 Dimenzije si lahko ogledate v tehnični risbi, prav tako tudi število obratovalnih ur. Vključuje: filtrirno napravo, zvočno izolacijo, krmilno omaro, celotno dokumentacijo itd. ODLIČNO STANJE Gre za rabljeno, pripravljeno napravo za takojšnjo uporabo. Prodaja brez garancije in jamstva. Pridržujemo si pravico do vmesne prodaje in napak.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Laserski vir: Klsdpsxzuimefx Aqqet Proizvajalec: SYNRAD, podjetje skupine Novanta Model: FSV40SFD Tip: V40 Serija: firestar Leto izdelave: 2018

Stanje: novo, Leto izdelave: 2025, Turbine rotary table system Kledpfx Aodtq Anoqqst Diameter: 1500 mm; 2 x 7.5 kW blast wheels If you have any questions regarding technical specifications, please contact us in writing or by phone. The machines are manufactured at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known contact persons.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: - Number of spindles: 1 - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm Kledpfx Aqjw E H E Roqst - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106546-11, skupna višina: 3.550 mm, skupna dolžina: 7.185 mm, skupna širina: 4.720 mm, skupna masa: 8.000 kg, The drilling method of the deep hole drilling machine is single-lip (gun drilling). Drilling Unit Information: - Number of spindles: 1 - Spindle speed, steplessly adjustable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Maximum drilling depth: 1,000 mm (in one pass, without retraction) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter with indexable inserts: 40 mm - Maximum thread tapping: M27 - Milling material removal rate: 250 ccm/min Travel Axes: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steady rests) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 1,200 liters - 1x hinge belt chip conveyor - 1x screw conveyor system - 1x hydraulic unit and pneumatic unit/equipment - 1x central lubrication - 1x submersible pump: Pump delivery rate: 200 l/min - 1x low-pressure pump: Pump delivery rate: 100 l/min Pump drive: 2.2 kW - 1x compact belt filter: Filtration rate: 175 l/min For machining steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW Ksdpfx Aexdm Awjqqelt - 1x air cooler (heat exchanger) 22.5 kW - 1x oil mist extraction system, Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with SK 40 tool holder Tool Change Magazine consists of: - Tool magazine with intermediate gripper - SK 40 tool holders - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Tool storage positions: 80 - 2x swivelling tool steadies for guiding and supporting long drilling tools, with automatic return to home position. Clamping table with B axis and NC rotary table: - Length/width: 800x600 mm - B axis: 360° - Positioning accuracy B axis: +/- 30" - Table travel: 800 mm - Payload (centrical): 1,500 daN Electrical Equipment: - 1x CNC control, Heidenhain iTNC 530 - 1x drilling process monitoring - 1x RENISHAW probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Leto izdelave: 2003, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 03234, Stroj za odstranjevanje oksida s 6 krtačami (3 pari) za jekleno žico premera 5,5–16,0 mm (nizkoogljično jeklo). Pari krtač so razporejeni s 60-stopinjskim zamikom za maksimalen učinek. Zelo čist in urejen stroj. Priporočamo ogled in pregled na lokaciji. Kedpfex R Uzdex Aqqelt

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Kledpfx Aqohx Elfjqet Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16501575, volumenski pretok: 4.800 m³/h, vhodna napetost: 380 V, moč: 2,5 kW (3,40 KM), Oprema: Na voljo je tipska ploščica, The dirt particles, emulsion and oil mist, as well as smoke generated are captured directly at the source and guided through the individual filter stages. The separated liquid collects at the bottom of the device and can be returned to the machining center via the siphon. In the first filter stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filter stage captures the majority of the fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the level of contamination. The third filter stage consists of a large-area particulate air filter of class H13. A consistent high efficiency of 99.95% for particle sizes from 0.3μ DOP is ensured here. Type testing according to DIN EN 1822-1 H13 permits the recirculation of the filtered air back into the workspace. Kedpfx Aeyz Sn Njqqjlt

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.064 mm, teža obdelovanca (maks.): 250 kg, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, skupna višina: 2.700 mm, delovno območje: 175 mm, vrsta nastavitve višine: mehanski, dolžina območja skeniranja: 175 mm, širina območja skeniranja: 175 mm, dolžina mize: 1.200 mm, širina mize: 1.200 mm, potrebna višina: 2.700 mm, valovna dolžina laserja: 1.064 nm, delovna višina: 500 mm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, premer ekstrakcijske šobe: 50 mm, delovna širina: 175 mm, Oprema: kabina, IPG vláknový laser typ M · Laserová trieda 1 · Vyrobené v Slovinsku Delovna postaja XXL – posebna konstrukcija: - Stojišče z višino mize v stoječi izvedbi - Zložljiva drsna vrata, desno popolnoma zastekljena, varnostno steklo LK 1 - Svetla delovna luč - Priključek DN50 iz nerjavečega jekla - Sistem težkih predalov: do 250 kg, notranje mere 1,2 × 1,2 m - Položaj zunaj: nakladanje/raztovarjanje - Položaj znotraj: lasersko obdelovanje - Programabilen samodejni zagon, magnetno stikalo kot varovalo - Obostranska reža za izjemno dolge dele, zaščitna krtača za žarke - Višina strehe za dele do 500 mm pod 254 mm objektivom - Z-os ročno, osnovna vrednost shranljiva - Zunanja višina stroja: ca. 2,50 – 2,70 m Kjdpfxeyimz Aj Aqqelt Laser – IPG MOPA: - Diodno črpani iterbijev vlaken laser - Moč: 20 W - Nastavljiva dolžina pulza (tudi za plastiko) - Valovna dolžina: 1064 nm - Pilotni laser + 2 distančna laserja (650 nm,

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.070 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, vrsta hlajenja: zrak, skupna širina: 920 mm, skupna višina: 940 mm, skupna dolžina: 1.760 mm, širina odprtine vrat: 670 mm, višina odprtine vrat: 500 mm, dolžina območja skeniranja: 175 mm, širina območja skeniranja: 175 mm, pomik po osi Z: 400 mm, višina mize: 710 mm, dolžina mize: 710 mm, širina mize: 400 mm, potrebna širina: 920 mm, potrebna višina: 940 mm, valovna dolžina laserja: 1.070 nm, zahteva za prostor dolžina: 1.760 mm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, premer ekstrakcijske šobe: 50 mm, delovna širina: 175 mm, Oprema: kabina, Fiber laser system for professional marking and engraving of metals and plastics. Featuring the SK-LASER Workstation, Laser Class 1, with automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door automatically opens - Door opening approx. H 500 × W 670 mm - Operator protection via safety control Laser – IPG (Made in Germany): - Power: 20 W - Pulse energy: 1.0 mJ - Pulse duration: 100 ns - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 - Air cooled, < 400 W Optics & Scanner: - F-Theta f = 254 mm - Marking field: 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control System: - Windows 11 Pro, SSD, 23" monitor Kodeyimpaepfx Aqqolt - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Sit/stand workstation, aluminum enclosure - Worktable 710 × 400 mm, 25 mm hole grid - Dimensions: 1760 × 920 × 940 mm Motorized Z-axis (400 mm) - Extraction nozzle DN50 - Safety (PL4) - Emergency stop - 2-channel interlock Safety Relay - Rear service door (when open, Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine - CE · Made in Germany

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, moč: 65,9 kW (89,60 KM), vhodni tok: 102 A, GWK industrijska hladilna in ogrevalna naprava, weco 48.1 wzttx + twd 18, weco e b 20 w m20 pt 5x x c x Tehnični podatki: Obratovalna napetost: 400/460V AC ±10 % Nazivni tok: 102A Maks. predvarovalka: 160A Frekvenca: 50/60Hz Krmilna napetost: 24/230V Električna priključna moč: 65,9kW Številka vezalne sheme: 489850 Nazivna hladilna moč: 20/25kW Maks. obratovalna temperatura: 30°C Kedpfxjx Aprlj Aqqelt Hladilno sredstvo: R449A Maks. polnilna masa: 10kg CO₂ ekvivalent: 13,97 t Globalni potencial segrevanja: 1397 Maks. obratovalni nadtlak Psh: 23bar Maks. obratovalni nadtlak Psl: 10bar Volumenski pretok kompresorja: 140/168m3/h Hitrost kompresorja: 2900/3500 obr/min Končni tlak kompresorja: 29,5bar Pomembno obvestilo: Vsebuje fluorirane toplogredne pline, ki jih zajema Kjotski protokol!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 10.600 mm, laserska moč: 60 W, vrsta hlajenja: zrak, skupna širina: 800 mm, skupna višina: 1.800 mm, skupna dolžina: 1.700 mm, delovno območje: 1.200 mm, trajanje garancije: 6 meseci, vrsta nastavitve višine: električni, višina mize: 7.000 mm, dolžina mize: 4.000 mm, Oprema: kabina, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Data - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air-cooled - Power supply: 230 V / 50 Hz - Scanner & Optics - X-Y galvo scanner with mirror mount - F-Theta lens: F = 200 mm, anti-reflection protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Enclosed workstation - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Control & Software - Industrial PC Marking software: - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap files - Intuitive user interface, user-friendly Scope of Delivery & Safety - Complete machine, workstation - 6-month warranty - CE, TÜV certified Condition & Delivery Kjdpoyfucvofx Aqqelt - Refurbished, technically tested Offer ex works plus delivery, while stocks last

Leto izdelave: 2026, stanje: novo, Bosporas Machinery | AYIKA je proizvajalec linij za obdelavo kolutov pločevine, linij za profiliranje (roll forming) in sistemov za podajanje na stiskalnice, ki nudi visokokakovostne in po meri prilagojene industrijske rešitve. Visokozmogljiva težka linija za vzdolžno razrezovanje pločevine (cut to length) je zasnovana za natančno rezanje pločevine z naprednimi konfiguracijami in kapaciteto koluta do 20 ton. TEHNIČNI PODATKI Debelina pločevine: 0,5 – 3 mm / do 4 mm (težka izvedba) Širina koluta: do 1500 mm Teža koluta: do 20 ton Vrsta reza/škarij: Gonilno krmiljene giljotinske škarje, pnevmatske ekscentrične škarje, hidravlične škarje, rotacijske škarje Hitrost linije: do 40 m/min (odvisno od konfiguracije) Sistem ravnanja: Večvaljna natančna ravnalna enota, visokoprecizni ravnalec Sistem zlaganja: Avtomatski zlagalec (možnost enojnega ali dvojnega zlaganja) Material: Hladno valjana, vroče valjana, pocinkana, nerjavna jekla, aluminij Ta težka cut to length linija je zasnovana za natančno in učinkovito obdelavo jeklenih kolutov s širino do 1500 mm in težo do 20 ton. Sistem zagotavlja visoko natančnost, stabilnost delovanja in zanesljivost v dolgoročnih industrijskih proizvodnih okoljih. Linijo sestavljajo integrirane enote: hidravlični odvijalec, sistem za nalaganje kolutov, enota za ravnanje, podajanje, rezalna enota, transportni sistem in avtomatski zlagalni sistem. KONFIGURACIJA IN FLEKSIBILNOST Kljdpoyy R Rmsfx Aqqst Sistem je mogoče konfigurirati glede na proizvodne potrebe in specifikacije materiala: - Standardna konfiguracija: 0,5 – 3 mm - Težka izvedba: do 4 mm Odvisno od zahtevane hitrosti, natančnosti in vrste materiala so na voljo različne rezalne tehnologije: - Gonilno krmiljene giljotinske škarje - Pnevmatske ekscentrične škarje - Hidravlične škarje - Rotacijske škarje Linijo je možno zasnovati z enojnim ali dvojnim izravnalnim jarkom (pit loop) za optimizacijo hitrosti, pretoka materiala in postavitve v proizvodni hali. GLAVNE PREDNOSTI - Težka konstrukcija za kolute do 20 ton - Visokonatančno rezanje pločevine - Napredni sistem ravnanja za nadzor ravnosti - Več možnosti rezanja - Avtomatizirani sistemi zlaganja in transporta - Robustna mehanska zasnova za dolgo življenjsko dobo INŽENIRING IN ZMOGLJIVOSTI Stroj je zgrajen iz robustnih mehanskih komponent visoke kakovosti, kar zagotavlja dolgotrajno delovanje tudi v najzahtevnejših industrijskih pogojih. Visokoprecizni sistem ravnanja odpravi notranje napetosti in izboljša ravnost pločevine, kar omogoča natančne in ponovljive rezultate rezanja. Napredni avtomatizacijski in krmilni sistemi zagotavljajo stabilno delovanje, zmanjšujejo odvisnost od operaterja in omogočajo učinkovito upravljanje proizvodnje. DELOVNE PREDNOSTI - Kratek dobavni rok v primerjavi z evropskimi proizvajalci - Visoka proizvodna učinkovitost in neprekinjeno delovanje - Nizki stroški vzdrževanja - Prilagodljiva in modularna zasnova - Zanesljivo delovanje v zahtevnih industrijskih pogojih PODROČJA UPORABE - Jeklarski servisni centri - Avtomobilska industrija in proizvodnja kovinskih komponent - Gradbeništvo in infrastruktura - Splošna obdelava pločevine DODATNA OPREMA - Dvojni zlagalni sistem - Vakuumski sistem zlaganja - Sistemi za manipulacijo in transport kolutov - Napredne avtomatizirane rešitve *Slike v tem oglasu prikazujejo referenčne inštalacije podobnih linij za razrez pločevine (razpon debelin 3 mm in 4 mm), uspešno izdelanih in zagnanih v zadnjih letih v različnih državah. Ti referenčni projekti potrjuj

Leto izdelave: 2026, stanje: novo, Bosporas Machinery | AYIKA je proizvajalec naprav za obdelavo kolutov, linij za profilno oblikovanje ter sistemov za napajanje stiskalnic, ki ponuja visokokakovostne in prilagojene industrijske rešitve. Težka linija za vzdolžno rezanje pločevinastih kolutov (slitting) je zasnovana za natančno rezanje jeklenih kolutov z možnostjo konfiguracije debeline do 4 mm. TEHNIČNI PODATKI Debelina koluta: 0,3 – 3 mm / do 4 mm Širina koluta: 300 – 1500 mm Teža koluta: do 20 ton Hitrost rezanja: do 100 m/min Natančnost rezanja: ±0,1 mm Minimalna širina reza: min. 50 mm Vrsta materiala: hladno valjana (CR), toplo valjana (HR), pocinkana, nerjaveča pločevina, PPGI, hladno valjano jeklo, aluminij Ta linija za vzdolžno rezanje je namenjena visokopreciznemu rezanju jeklenih kolutov z visoko nosilnostjo in zanesljivim delovanjem. Primerna je za obdelavo materialov debeline 3–4 mm, širine do 1500 mm ter teže kolutov do 20 ton. Na voljo je z enojno ali dvojno jamo (loop pit), kar optimizira pretok materiala, hitrost linije in proizvodno učinkovitost. Sistem je sestavljen iz popolnoma integriranih enot, vključno s hidravličnim odvijalcem (decoiler), vozičkom za nalaganje kolutov, začetnim odlepljevalcem, izravnalnikom, rezalno glavo, navijalcem odrezkov, napenjalnim sistemom ter hidravličnim navijalcem, kar zagotavlja neprekinjeno in stabilno proizvodnjo. Linija je na voljo v različnih konfiguracijah, odvisno od proizvodnih zahtev: Ta prilagodljiva zasnova omogoča optimizacijo sistema glede na vrsto materiala, debelino in proizvodne potrebe. KLJUČNE LASTNOSTI - Težka izvedba za 20-tonske kolute - Visoka natančnost rezanja (±0,1 mm) - Napredna rezalna glava z natančnim nastavitvenim sistemom - Hidravlični in avtomatizirani operativni sistemi - Visokohitrostna proizvodnja (do 100 m/min) - Robustna mehanska konstrukcija za dolgoročno uporabo Klodpeyy Ru Eofx Aqqst PREDNOSTI - Kratek dobavni rok v primerjavi z evropskimi proizvajalci - Visoka učinkovitost in neprekinjena proizvodnja - Zmanjšan čas izpada - Možnost prilagoditev konfiguracije - Zanesljiv in uporabniku prijazen avtomatiziran sistem UPORABA - Servisni centri za jeklo - Avtomobilska industrija - Gradbeni sektor - Objekti za obdelavo kovin DODATNA OPREMA - Rotacijski križni izmenjevalnik (turnstile) - Sistemi za manipulacijo in transport kolutov - Napredne rešitve avtomatizacije - Po meri oblikovane konfiguracije *Slike, prikazane v tem oglasu, vključujejo referenčne instalacije podobnih linij za vzdolžno rezanje kolutov (debeline 3 mm in 4 mm), ki so bile uspešno načrtovane, proizvedene, dobavljene in zagnane v različnih državah. Ti projekti dokazujejo naše izkušnje pri dobavi zanesljivih in visoko zmogljivih linij za rezanje kolutov po vsem svetu.

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: Kodpfx Aqonh R Eksqslt • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, številka stroja/vozila: 1018, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, Premer cevi (maks.): 50 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, trajanje garancije: 24 meseci, Oprema: CE označba, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping Kedpfx Aonfvy Uoqqjlt • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers once configured. In addition, the software is capable of reading data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transferring them into predefined sections. The use of a handheld scanner is also possible. Kledpfx Aqov Sybyjqjt The standard equipment includes a laptop with mount and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral extensions for marking long workpieces, are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – system for automatic determination of focus distance • Signal lamp to indicate operating status • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height approx. 270mm • Electrically adjustable Z-axis (work surface adjustment) • Frame made of aluminum profile • Connection 230V • Air cooled • Laptop with Windows OS • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Stanje: novo, Leto izdelave: 2025, Priprava abraziva 1x pometna jama 1x vedričasti transporter 1x zračni separator 1x električno vibracijsko sito 1x bunker za abraziv 1x tlačna peskalna naprava 200 l 1x peskalna cev, peskalna šoba, varnostno stikalo, krmilni kabel 1x krmilna omarica Kedpfx Ajw Ivvcoqqjlt Opcijska oprema: - Prečna polžna transportna naprava čez celotno širino peskalne hale (tudi kot dodatni zalogovnik za večurno peskanje) - Razširitev na 2 abraziva: feritno in mineralno - Bubenski magnetni separator - Končna stopnja demagnetizacije - Magnetni predal

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 5t z baterijskim pogonom za peskalno napravo - Nosilnost 5t Ksdpfx Ajyyxidsqqelt - Za tirni sistem - Baterijski pogon - Daljinsko upravljanje - Dimenzije: dolžina 3000 mm, širina 1000 mm - Površine za namestitev držal za obdelovance

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 10t za peskalno napravo s pnevmatskim pogonom. - Pnevmatski pogon za obremenitev 10 t - Obremenitev: 10 t - Dimenzije: D=2000mm Š=2000mm V=500mm - Za tirni sistem - S sprejemnimi površinami za vpenjanje obdelovancev Kledpfsyyxfrex Aqqjt - Rotacijska miza kot opcija

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Ročni strojni voziček za peskalno napravo, nosilnost 5 t - D= 3000 mm, Š= 1500 mm, V= 500 mm - Nosilnost: 5 t - Peskalni voziček s obročastimi valji za tirnice v peskalni hali - Profili postavljeni pokonci, da lahko peskalni material odteče - Vlečne zanke za viličarja Kledoyyxa Nspfx Aqqet - Vrtljiva miza na voljo kot opcija

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Kodpeu Hl R Tefx Aqqjlt Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Stanje: rabljeno, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S, 25 mm stroke with Heidenhain measuring system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50/60 Hz Connected load: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (stand-alone, detachable control device) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault control and process monitoring - Monitoring of current, voltage, power, and energy - Test impulse for part recognition - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Ksdpfxjpy Uzyo Aqqelt Rated capacity: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force initiation from 1.2 to 550 N - Heidenhain displacement measuring system Welding unit with 5 pneumatic cylinders and Festo valve manifold Type CPX Welding head mounted on horizontal guide rail and can be shifted 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 with 46 mm stroke, 1 with 20 mm stroke). Projection distance of welding tip: 300 mm Welding tip height above floor: 315 mm Welding unit dimensions W x H x D: 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 almost identical units available, price per complete unit

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 6.720 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 22.303, višina skobljanja: 300 mm, širina skobljanja: 400 mm, največja hitrost vrtenja: 5.800 obr/min, vrsta nastavitve višine: električni, priključek za stisnjen zrak: 7 letvica, vhodna napetost: 400 V, število vreten: 12, moč: 111,2 kW (151,19 KM), odstranjevanje ostružkov: 20 mm, vhodna frekvenca: 50 Hz, vhodni tok: 327 A, Na prodaj je težek, industrijsko primeren štiristranski skobeljni stroj Rex 410 z obsežno HIT mehanizacijo, zasnovan za učinkovito obdelavo gradbenega lesa, KVH/BSH izdelkov in profiliranega blaga. Naprava je primerna za: Klodpeyk E R Iefx Aqqjt • Predskobljanje • Skobljanje letev • Fino skobljanje KVH/BSH • Proizvodnjo profilov • Neprekinjeno obdelavo nosilcev skupaj z obračanjem in popravili Stroj ima 12 vreten, vključno z rezkališči za posne robove, in je zasnovan za velike odvzeme materiala ter obdelavo večjih prečnih prerezov. Prodaja iz obratovalnega mesta (stroj ni razstavljen). Za dodatne informacije ali vprašanja nam pišite ali nas pokličite.