Komax Connector Housings nakup rabljenega (5.445)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, 1. Currently everything is made only for use with Inarca connectors/housings. To use others that are not physically identical to Inarca connectors, conversion is required (the Komax team knows this best). 2. Double crimping is not possible. So single crimping is possible. 3. The ZETA 633/654 machine has 4 presses. The ZETA 633/656 machine has 3 presses (visible from the picture PP from the first email). 4. The Zeta 654 machine has an automatic coating insertion on the fastons. Possible for 6.3 and 4.8 plugs. 5. The system can be adapted to different numbers of poles in the connectors. We used connectors with different numbers of poles (2P, 3P, 4P, 7P, 8P). Depending on the needs of the buyer of the sets. On the 654 machine, the dosing of connectors into the machine is automatic via a vibrator. On the 656 machine, the connectors are manually inserted into the pallet (one is inserted, the other pallet is in the stack and the conductors are automatically inserted). 6. The presses are "smart" and automatically adjust the height of the clamp pressing onto the conductor. Pgodpjy Nfm Iefx Andsn 7. The machines do not have an injection unit. 8. In practice, we had a maximum of 1.500 mm. According to the technical data, it can be even more (see technical data listed below for each machine). 9. On the Zeta 656, it is possible to insert connectors on both ends of the conductors. On the Zeta 654, it is only possible on one side (see picture below).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, 1. Currently everything is made only for use with Inarca connectors/housings. To use others that are not physically identical to Inarca connectors, conversion is required (the Komax team knows this best). 2. Double crimping is not possible. So single crimping is possible. 3. The ZETA 633/654 machine has 4 presses. The ZETA 633/656 machine has 3 presses (visible from the picture PP from the first email). 4. The Zeta 654 machine has an automatic coating insertion on the fastons. Possible for 6.3 and 4.8 plugs. 5. The system can be adapted to different numbers of poles in the connectors. We used connectors with different numbers of poles (2P, 3P, 4P, 7P, 8P). Depending on the needs of the buyer of the sets. On the 654 machine, the dosing of connectors into the machine is automatic via a vibrator. On the 656 machine, the connectors are manually inserted into the pallet (one is inserted, the other pallet is in the stack and the conductors are automatically inserted). 6. The presses are "smart" and automatically adjust the height of the clamp pressing onto the conductor. 7. The machines do not have an injection unit. 8. In practice, we had a maximum of 1.500 mm. According to the technical data, it can be even more (see technical data listed below for each machine). Pgjdpfx Aoy I Dr Tjnden 9. On the Zeta 656, it is possible to insert connectors on both ends of the conductors. On the Zeta 654, it is only possible on one side (see picture below).

Stanje: dober (rabljeno), The scope of delivery includes: 01x Shelf Connector, used Manufacturer: Stow Type: Pal Rack NS Material color: sendzimir galvanized Total length: approx. 150 mm Rack spacing: approx. 150 mm Pjdpfx Ansv Ua S Redsgn Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Borehole diameter: approx. 11 mm Weight: 0.200 kg | each 02x Bolts M10 x 35 mm 02x Nuts M10 04x Washers M10 Your points of contact in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding this item: This item is only available for collection. Any transport or shipping of this item that may be required will incur additional costs, which can be provided upon request depending on the place of delivery or scope of delivery.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Rack connector, used Material color: blue Clear span: approx. 730 mm L-profile: approx. 30 x 30 mm End plate: approx. 95 x 60 x 6 mm Weight per piece: approx. 1.510 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Podork I D Repfx Andegn General information about the item: This item is available for collection only. If transport or shipping of this item is required, additional costs will apply. These can be individually requested from us depending on the place of delivery and scope of the order.

Stanje: dober (rabljeno), Technical specifications for the racking connector: Racking system: Polypal Scope of delivery includes: 01x racking connector, used Psdpfswmng Sjx Andjgn for rack spacing: 250 mm total length: approx. 310 mm U-profile dimensions: approx. 50 x 15 mm material colour: sendzimir galvanized material thickness: approx. 2 mm borehole diameter: 10 mm weight: 0.270 kg | per piece Including: 02x bolts M10 x 35 mm 02x nuts M10 02x washers M20 Your contact persons in our company: Mr Andre Evering Mr Mario Klöver Mr Falk Deutsch General information about the item: This item is only available for collection. Any requested transport or shipping of this item is subject to additional costs, which may vary depending on delivery location or scope and can be requested from us separately.

Stanje: dober (rabljeno), Technical specifications for the shelf connector: Shelving system: Polypal The delivery includes: 01x Shelf connector, used for shelf gap: 200 mm overall length: approx. 260 mm U-profile dimensions: approx. 50 x 15 mm Material finish: Sendzimir galvanized Drill hole Ø: 11 mm Weight: 0.250 kg | pc. including: 02x Bolts M10 x 35 mm Pgedpjwhkbzjfx Andjn 02x Nuts M10 02x Washers M20 Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is only offered for collection. If transportation or shipping of this item is required, additional costs will apply. These can be requested from us separately depending on the place of delivery and volume.

Stanje: dober (rabljeno), The scope of delivery includes: 01x Shelf connector, used Manufacturer: Schäfer Type: PR600 Pgedpfx Ajwv Rg Hsnden Material color: RAL 5010 blue Total length: approx. 280 mm Shelf spacing: approx. 200 mm L-profile: approx. 40 x 40 x 3 mm Weight: 0.400 kg | each 02x Bolts M8 x 20 mm 02x Nuts M8 04x Washers M8 Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, this will incur additional costs, which can be inquired separately from us depending on the delivery location and scope of delivery.

Leto izdelave: 2008, obratovalne ure: 30.000 h, stanje: pripravljen za uporabo (rabljen), Avtomatiziran sistem iz leta 2008. Ta KOMAX Alpha 433 L je namenjen avtomatski obdelavi kablov, vključno z rezanjem, odstranjevanjem izolacije, krimpanjem in varjenjem. Vključuje zalogovnik žice Komax ADS 123, zaščitni pokrov, odsesovalni sistem ter različne krimp in predelovalne module. Če iščete kakovostne možnosti za obdelavo kablov, razmislite o nakupu pri nas ponujene naprave KOMAX Alpha 433 L. Za dodatne informacije nas kontaktirajte. Komax ADS 123 (skladišče žic) • Proizvajalec: Komax France • Napajanje: 3 × 400 V (3P+N) • Frekvenca: 50–60 Hz • Največja priključna moč: 5.500 VA • Zračni tlak: 4–6 bar Cosmotec hladilna enota • Proizvajalec: Cosmotec • Model: XVA36 03 320 • Frekvenca: 50/60 Hz • Tok: 0,51 A Schunk KM-CFK-564MF (varilni modul 1) • Proizvajalec: Schunk • Model: KM-CFK-564MF • Leto izdelave: 2012 • Nazivna moč (50 % delovni cikel): 120 kVA • Nazivna primarna napetost: 500 V • Nazivna frekvenca: 1000 Hz • Izhodna moč: 43 kVA • Sekundarni delovni tok (50 % delovni cikel): 15,6 kA • Sekundarni kratkostični tok: 120 kA • Napetost v prostem teku na sekundarni strani: do 8 V • Sila elektrod: 31–187 daN • Teža: 180 kg Schunk KM-CFK-564MF (varilni modul 2) • Proizvajalec: Schunk • Model: KM-CFK-564MF • Leto izdelave: 2012 • Nazivna moč (50 % delovni cikel): 120 kVA • Nazivna primarna napetost: 500 V • Nazivna frekvenca: 1000 Hz • Izhodna moč: 43 kVA • Sekundarni delovni tok (50 % delovni cikel): 15,6 kA Psdpfszg Hm Uex Andsgn • Sekundarni kratkostični tok: 120 kA • Napetost v prostem teku na sekundarni strani: do 8 V • Sila elektrod: 31–187 daN • Teža: 180 kg Obseg sistema: • Popolnoma avtomatski stroj Komax Alpha 433 L • Zalogovnik žic Komax ADS 123 • Zaščitni varnostni pokrov • Odsesovalna enota (AAT 260) • Industrijski računalnik in krmilnik • Različni krimp in predelovalni moduli, opcijsko • Dodatna opcijska oprema na zahtevo Področje uporabe: • Naprava je pripravljena za obratovanje in bila uporabljena za avtomatsko obdelavo kablov, vključno z rezanjem, odstranjevanjem izolacije, krimpanjem in varjenjem • Vsi sistemi so trenutno še vedno pod električno napetostjo in v popolnoma delujočem stanju • Približno 30.000 delovnih ur

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Machine tool from 2005. This KOMAX GAMMA 333 PC features a configuration with several MCI711 presses, equipped with contact strip cutters and various feed options. It includes two 2-metre conveyor belt extensions for efficient operation. If you are looking for high-quality automation solutions, consider the KOMAX GAMMA 333 PC, which we are offering for sale. Contact us for further details. • Machine configuration: • Side 1: • 1x MCI711 press with contact strip cutter; rear contact feed – passive • 1x MCI711 press with contact strip cutter; rear contact feed – passive; side contact feed – active (with paper strip winding) • Side 2: • 1x MCI711 press with contact strip cutter; rear contact feed – passive • Control software: TopWin 2.4.3.24 • Note: Machine is sold without mini-applicators Pgedjy Ukfaspfx Andjn Additional equipment: • Conveyor belt: 2x 2-metre conveyor belt extensions

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Krmilnik sile stiskanja. Pjdpoy Ivdbjfx Andegn

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Gamma 333 popolnoma funkcionalna. Pedsy Ah R Nspfx Andjgn

Stanje: rabljeno, Električno ogrevanje: 18 kW Nastavljiva kroženje zraka Pnevmatsko krmiljen dovod svežega zraka, odvod zraka in dimna loputa Čiščenje: čiščenje s peno Dovod dima: integriran znotraj komore Dimni material: lesni sekanci Brez sistema za naknadno zgorevanje Mere naprave (v cm): Širina: 130 Dolžina: 120 Višina: 230 Mere zaboja (v cm): 90 × 90 × 160 (višina) Podpof U Tb Rsfx Andegn Dobavni rok: 30 delovnih dni po predplačilu

Leto izdelave: 2005, stanje: rabljeno, Used machine Year of manufacture: 2005 Equipment and technical data: Pgsdpfx Asyxyanonden - Log House Milling Machine BL100A – Four-Head Unit - For producing chalet corner joints via milling on four sides of the log beam in a single setup, using 2 × vertical and 2 × horizontal milling spindles - Processing dimensions: 140 × 200 mm - Milling spindles: Ø 30 mm - Cutter: max. 4 × 220 × 100 mm - Motor power: 4 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, infinitely variable, with rapid traverse - Operation: two-hand control / via PLC control system - Milling depth adjustment: spindle with digital counter - Workpiece clamping: 2 × vertically pneumatic - Extraction: underfloor collection funnel Ø 160 mm - Equipment: complete with electrical system, PLC control, and pneumatics - Machine frame: prepared for end tenoning unit, drilling device, and crosscut saw - Machine guarding: closed design, hinged protective hood (gas spring) with viewing window - Control cabinet: on pedestal with 3.0 m cable conduit - Delivery condition: ready for operation, without tools - Horizontal clamps in machine table: 2 pcs - Operation: pneumatically from the front - Clamping cycle: automatic via PLC control - End tenoning unit integrated - Milling spindle: Ø 30 mm - Cutter: max. 180 × 40 mm - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, infinitely variable, with rapid traverse - Height adjustment: spindle with digital counter - Workpiece clamping: 1 × additional vertical pneumatic - Equipment: integrated, with electrical system and pneumatics, without cutter - Horizontal drilling device integrated with drill guide and splinter guard - Drill diameter: max. 30 mm - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatic, infinitely variable, with rapid traverse for idle stroke - Height adjustment: spindle with digital counter - Workpiece clamping: 1 × additional vertical pneumatic - Equipment: integrated, with electrical system and pneumatics, incl. Ø 20 mm drill bit - Under-table crosscut circular saw integrated (automatic mode only) - Max. cutting dimension: 200 × 140 mm (W × H) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Feed: pneumatic - Workpiece clamping: pneumatic - Extraction: extraction funnel Ø 120 mm - Equipment: integrated, with electrical system and pneumatics, incl. saw blade - Prepared for automatic operation - Sliding table: mechanics, pneumatics and electrics for end tenoning unit - Interface: electrical for external Tigerstop control - Infeed table length: 9,000 mm - Outfeed table length: 4,000 mm Availability: short notice Location: Röllbach

Stanje: rabljeno, Leto izdelave: 2023, Used installation Year of construction: 2023 Condition: as new, system has only a few operating hours Equipment and technical data: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and chips - Fan: 2 x 7.5 kW - Airflow: 10,000 m³/h - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs, each 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Pressure relief area: 0.84 m² (bursting disks) - Base frame with discharge hopper and rotary valve; dry discharge system with C-coupling Consisting of: - ECO JET DUO 6 UPPER SECTION, 2 x 7.5 KW: Clean air filter unit; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; including pressure relief area and Dry discharge system with C-coupling; without filters and control system; including pressure transducers - ECO JET DUO 6 ZWR XL – 1100 MM: Extension ring for increasing height/expansion with 2 suction inlets for extraction stubs - Substructure with discharge hopper and built-in rotary valve 960/1 FG: For chip disposal via customer-provided transport fan into an existing silo or similar; Transport duct DN 200 mm, approx. 1,260 mm length under rotary valve; connection to customer’s transport duct Rotary valve certified according to ATEX directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class/construction: IP 54 / B3 Insulation class: F Speed: 41 rpm Throughput*: 15,744 l/h* No. of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pieces required Filter BIA Category ‘M’ – electrically conductive; 2.50 m length, incl. support cages; 77.6 m² filter area - Suction stub 400 mm: with non-return flap in rectangular duct - ECO JET non-return flap 910x346x500 mm - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency converter up to max. 37 kW; suitable power modules and controls as well as the frequency converter are included in the base unit; the frequency converter is installed in the control cabinet. Cascade control with frequency converter handover: Pgedpoyk I U Asfx Anden Fan 1 runs on the frequency converter; when the threshold value is reached, it switches to mains operation; fan 2 takes over the frequency converter and adjusts as required. Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault message Display of fault message in clear text on the display and collective fault lamp on the door Manual start of discharge via display button Start cleaning via differential pressure Manual cleaning start via button Post-cleaning Fire protection monitoring

Stanje: zelo dobro (rabljeno), Rezervno ogrevanje Buderus 2500 kW. Olje + plin. V 20-stopinjskem pomorskem kontejnerju. Podpfxox U Eyfe Andsgn

Stanje: rabljeno, Cable connector PNEUMAX Parker PES-C11F4. Pgjdpfslkcihex Andjn

Stanje: rabljeno, Cable connector PNEUMAX Parker PES-C11F4. Pgodpfx Ajlkch Iendsn

Stanje: novo, Leto izdelave: 2025, trajanje garancije: 12 meseci, največja višina reza: 120 mm, največja širina rezanja: 200 mm, moč: 16 kW (21,75 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine for machining components for modern log house construction, offering the perfect price-performance ratio for beginners, small-scale productions, or as an addition for special parts. Components are placed and positioned manually – after activation of the processing unit using the two-hand control buttons, the milling operation runs automatically. Optional roller tables and positioning stops are available to assist with the positioning of the components. Pgjdpfx Anjwnt Htodsn

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 1 h, Proizvodna linija za prefabrikacijo sten / stropnih panelov / strešnih elementov v leseni konstrukciji – BOOSTON MACHINERY – Ponudba vključuje proizvodno linijo dolžine 9 m (na voljo tudi druge dolžine od 3 m do 15 m) Smo proizvajalec – nudimo popolne proizvodne linije / naprave / metuljaste mize / vrtljive mize / delovne postaje za prefabrikacijo lesenih sten, namenjene obratom za prefabrikacijo montažnih, modularnih hiš in proizvajalcem lesenih konstrukcij. Ponujeni komplet omogoča izvedbo celotnega proizvodnega procesa: od montaže okvirja, oblaganja sten, obračanja prefabrikatov do transporta končnih elementov. Sestava proizvodne linije: 1. Delovna postaja ER-00R/900 Montažna miza za izdelavo lesenih okvirjev, opremljena s pnevmatsko dvižnimi transportnimi valji. Parametri: Pgsdpfx Anszc Uwboden * dolžina: 9000 mm * skupna širina: 3600 mm * delovna višina: 700 mm * 2 liniji pnevmatsko dvižnih valjev Namen: * montaža okvirjev sten * pozicioniranje konstrukcijskih elementov * transport prefabrikatov med postajami 2. Komplet prislonskih cilinderjev SD-01 Komplet 6 prislonskih cilinderjev za delovno postajo ER-00R. Parametri: * količina: 6 kos * pritisk: 140 kg pri 8 barih Namen: * pritiskanje konstrukcijskih elementov med montažo * stabilizacija prefabrikatov med zbijanjem in sestavljanjem 3. Most za materiale MT-01 Mobilni most za transport plošč in konstrukcijskih elementov. Parametri: * nosilnost: 800 kg * 360° vrtljiva kolesa * ročno premikanje med delovnimi postajami Namen: * transport konstrukcijskih plošč in materiala med postajami 4. Metuljasta miza ER-03H/900 z hidravličnim pogonom Postaja za obračanje prefabriciranih sten in dodatna delovna postaja za zbitoje okvirjev in oplatenje (krilo št. 1) - Krilo št. 1 Parametri: * dolžina: 9000 mm * širina: 3600 mm * višina: 700 mm * največja obremenitev: 2500 kg * 3 linije pnevmatsko dvižnih valjev Namen: * montaža in transport prefabrikatov * obračanje sten - Krilo št. 2 Parametri: * dolžina: 9000 mm * širina: 2300 mm * višina: 700 mm Oprema: Komplet valjčnih zatičev za navpični transport prefabrikatov do transportnih vozičkov 5. Komplet transportnih vozičkov WP-01 Komplet 3 transportnih vozičkov za prevzem gotovih sten. Parametri: * nastavljiva višina podpore * največja nosilnost kompleta: 2500 kg Namen: * prevzem končnih prefabrikatov * transport sten v navpičnem položaju ## Zakaj BOOSTON MACHINERY? ✔ Smo proizvajalec strojev – kupujete neposredno pri proizvajalcu, brez posrednikov. ✔ Možnost ogleda strojev v proizvodni in skladiščni hali. ✔ Izdelki in sestavni deli so proizvedeni v Evropi. ✔ 12 mesecev garancije proizvajalca. ✔ Enostavna, robustna in preizkušena konstrukcija za delo v obratih za prefabrikacijo. ✔ Brez zapletene avtomatike ali zahtevne elektronike – zanesljiva mehanika za dolgoletno uporabo. ✔ Modularna zasnova omogoča kasnejšo nadgradnjo delovnih postaj. ## Možnosti nadgradnje Proizvajamo mize in proizvodne linije v dolžinah: 3,0 m • 4,5 m • 6,0 m • 7,5 m • 9,0 m • 10,5 m • 12,0 m • 13,5 m • 15,0 m

Stanje: rabljeno, Manufacturer: EATON Type: AB 12240 E 36 units available Pgjdpfxjd N Sv Ns Andsn New stock

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 10.900 mm, dolžina podajanja os X: 10.200 mm, dolžina pomika po osi Y: 1.960 mm, dolžina podajanja os Z: 1.850 mm, višina skobljanja: 1.850 mm, širina skobljanja: 1.750 mm, hitrost vretena (min.): 9.000 obr/min, WALDRICH COBURG Hydraulic Double-Column Planer and Grinding Machine Control: Conventional contactor control system Operation: Original Waldrich Coburg main control panel with push buttons, rotary switches, analog displays, and emergency stop Display / Positioning: 2 x HEIDENHAIN POSITIP digital position indicators / position control aids at the main control panel Additional control units: Siemens SIMATIC HMI KTP700 / KTP400 for grinding support and grinding attachment Partial retrofit 2021: approx. EUR 170,000 Ongoing modernizations / retrofit until 2021 Retrofitted grinding attachment Modernized grinding support Siemens / Lenze drive technology Electrical cabinet and modernization documentation available Working area Maximum planing width / clamping width: 1,750 / 1,790 mm Maximum pass-through height: 1,850 mm Total clamping surface: 10,900 x 1,500 mm Additionally documented: 2 x 4,750 x 1,500 mm Usable table/length according to card: approx. 10,200 mm T-slots: 7 T-slot spacing: 210 mm T-slot width: 28 mm Smallest width between crossrails/end stands: 420 mm Crossrail / Columns / Supports Number of crossrails: 2 Number of columns: 2 Crossrail horizontal travel: 1,960 mm Crossrail vertical travel: 250 mm Column horizontal travel: 550 mm Column vertical travel: 1,850 mm Support swiveling range: +/- 60° Support tilting range: +/- 25° Speeds / Feeds Working speed: 5 - 60 m/min Return speed: 5 - 60 m/min Vertical feed cross-planer slide: 0.1 - 7.5 mm Horizontal feed cross-planer slide: 0.1 - 15 mm Vertical feed column slide: 0.1 - 7.5 mm Horizontal feed column slide: 0.1 - 7.5 mm Dimensions / Weight / Electrical Connection Floor space required: 22.67 x 3.97 m Height: 3.95 m Weight: approx. 51,872 kg Voltage: 500 V Fuse: 125 A Current type: Three-phase current Frequency: 50 Hz Grinding support / Grinding attachment Grinding support with grinding spindle Guideway system with base body and Z-axis Y-axis grinding support retrofitted to ballscrew 40 x 10 Preloaded double nut Single-axis control for infeed axis Bevel gear motor 72 Nm Synchronous servo motor 11 Nm with absolute encoder Rittal compact control cabinet Grinding spindle / Grinding wheel drive Siemens asynchronous motor for grinding spindle 9 kW at 1,500 rpm / 57 Nm 10 kW at 1,750 rpm / 55 Nm Max. speed: 9,000 rpm Siemens SINAMICS drive technology Siemens SIMATIC operator unit for grinding support / grinding attachment Psdpfx Aney Ubn Sodogn Lenze L-force axis drive for Y-axis grinding support Separate control cabinets for grinding wheel drive and Y-axis grinding support Cooling / Hydraulics Schimpke DK150-V cooling unit Cooling capacity approx. 17.5 kW Cooling medium: Oil ISO VG46 Gear pump approx. 135 l/min at 10 bar Pump motor approx. 5.5 kW Transformer 500 V to 400 V Separate hydraulic / aggregate block available Mechanics / Overhaul Partial overhaul on bed/table, crossbeam with slides Y1/Y2, Z1-axis planer support, and lubrication system Machine bed hand-scraped Bed geometry restored Table hand-scraped Guideways reworked Slides Y1/Y2 hand-scraped Gibs coated and hand-scraped Steel band replaced Central lubrication system expanded Wipers replaced Crossbeam lift repaired Worm shaft, central drive shaft, coupling pieces and rolling bearings replaced Bellows on X-axis replaced Condition / Equipment Column area newly painted Table and functional surfaces in very good condition Accessories, assemblies, and spare parts available

Stanje: rabljeno, Ohišje ploščnega filtra za končno filtracijo piva ali drugih tekočin. Na voljo v poljubnih velikostih, zmogljivostih in stopnjah ločljivosti. Proizvajalci: Sartorius/Seitz/Pall/Filtrox/Eaton. Z veseljem nam lahko sporočite vaš primer uporabe (medij, hitrost pretoka, ločljivost), da najdemo ustrezno rešitev za vas. Podpfew Uu U Rsx Andegn Stroj (dodatno): Končna filtracija Material: nerjaveče jeklo Položaj: samostoječe Osnovna konstrukcija: cilindrično ohišje na cevnih nogah s kalotami Oprema: manometer, ohišje s pritrdilnimi vijaki ali napenjalnim obročem.

Stanje: rabljeno, Filter cabinet, dust extractor, extraction unit, filter unit, dust filter Pjdpfx Anjwyf T Asdegn Dimensions: 680 mm x 680 mm x 2800 mm Discharge diameter: 200 mm Capacity: 1,500 m³/h New top filter 3 round filter cartridges need replacement Complete with control cabinet and pneumatically cleaned filter cartridges

Stanje: novo, Nudimo gradnjo celoletnih lesenih hišk, izdelanih iz najkakovostnejših materialov z natančno pozornostjo do vsake podrobnosti. Tehnične specifikacije predstavljenega modela (3,20 m x 9,50 m): Konstrukcija: certificiran les C24 (skandinavska smreka) Izolacija tal: 20 cm izolacije Izolacija strehe: 15 cm izolacije Izolacija sten: 10 cm izolacije Popolna prilagoditev po želji naročnika: Dimenzije: Gradimo po meri! Predstavljeni model meri 3,20 m x 9,50 m, lahko pa za vas izvedemo katerikoli drug projekt in velikost. Barve: Zunanjo, notranjo barvo ter barvo oken in vrat izberete sami. Uporabljamo izključno profesionalne in obstojne barve znamke Tikkurila. Pgsdpfxezdwf Ns Anden 💰 Cena: že od 1000 € / m² Vse podrobnosti, individualne ponudbe in odgovore na vprašanja z veseljem predstavim po telefonu. Vabljeni k kontaktu!

Leto izdelave: 2013, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo sortirno napravo, ki obsega: - Sito boben - Dvigovalni trak - Transportni trak - Sortirni trak s 6 sortirnimi mesti - Bunker Napravo je potrebno razstaviti. V uporabi je bila le kratek čas. Prodaja po ponudbi. Podpfxezdq Uwj Andsgn Za dodatna vprašanja smo vam z veseljem na voljo. Prodaja po ponudbi. Prodaja brez garancije, jamstva, izjave o skladnosti ali izjave proizvajalca.