Kallfass Kc5050/400 Universal nakup rabljenega (21.753)

Stanje: rabljeno, Leto izdelave: 2005, Semi-automatic L-sealing machine – Kallfass KC5050/450 Universal, Year 2005, Serial No. VD 12.05.741 - Mounted on mobile frame - Automatic transport into shrink tunnel after sealing - Excellent condition – TOP condition - Online video inspection possible via Skype Pgjdpfx Agsqxwk Tsxok - We look forward to your visit – more machines in stock - Immediately available – ready for inspection - Located in Emskirchen / Nuremberg – testing possible on site

Stanje: rabljeno, Leto izdelave: 2000, Fully automatic shrink-wrapping machine with shrink tunnel - Automatic foil sealing machine Kallfass Universa 400 NT - Universal 450 N, Year 2000 - Serial no. S 04.00.9 Online video inspection via Skype video Pgodpfx Agjr H N U Hoxok We would be pleased to welcome your visit – more machines in stock Available immediately – Can be inspected Located in Emskirchen / Nuremberg – Testing possible

Stanje: rabljeno, Leto izdelave: 1989, Semi-automatic L-sealing machine - Kallfass KC5050/400, Year 1983 - Serial No. V 6.83.1891 - Mounted on a mobile frame - After sealing, automatic transfer into heat shrink tunnel - Online video inspection possible via Skype - We welcome your visit—additional machines in stock - Immediately available—inspection possible - Located in Emskirchen / Nuremberg—testing on site possible Psdpfxeinla To Agxsgk

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Fabricant : Kallfass GmbH Type : Compact-Schrumpfer KC 5040/450 Universal Année de fabrication : 2010 Données techniques : Dimensions du cadre de soudure : 500 x 400 mm Largeur maximale des rouleaux de film : 550 mm Hauteur de travail : 870 - 970 mm Alimentation : 380 V triphasé Soudeuse en L facile à utiliser, combinée à un tunnel de rétraction. Exécution particulièrement robuste pour une utilisation industrielle. Dimensions du cadre de soudure 500 x 400 mm. Technologie de soudage par impulsion éprouvée avec fil de soudage séparateur téflonné Psdpjyyxr Eofx Agxogk pour un fonctionnement totalement sans odeur. Équipée d’un mécanisme de fermeture automatique par pression pour garantir le respect précis du temps de soudure réglé et permettre la soudure propre de films épais. Inspection et démonstration possibles dans nos locaux sur rendez-vous. Garantie de fonctionnement, pas de garantie contractuelle.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Manufacturer: Kallfass GmbH Type: Shrink Tunnel Universal 950 HV Year of manufacture: 2007 Dimensions: approx. 2540 x 1655 x 1600 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical Data: Tunnel passage width: 900 mm Tunnel passage height: 500 mm Length of heated tunnel hood: 1700 mm Length of additional insulation hood: 2200 mm Tunnel outfeed, extended: approx. 600 mm Working height: 800 - 900 mm Power supply: 400 V three-phase current Rated power: 39 kW Rated current at 400 V: 56 A (single operation) Pgodpeyw Rm Aofx Agxjk Universally applicable, high-performance shrink tunnel with laterally adjustable air flaps and externally adjustable outlet openings at the bottom for precise control of hot air flow, ensuring optimal shrinking results even for challenging product contours. The recirculation system, a tunnel hood with an additional double-chamber system, and significantly enhanced all-round insulation provide energy-efficient operation. Equipped with rod chain conveyor, infinitely variable speed control. Functional guarantee, no warranty Offer validity: 30 days, subject to prior sale Please note that all machines are delivered without power cables.

Stanje: zelo dobro (rabljeno), Dimensions of the feed opening: 400 x 200 mm Dimensions: Length: 2,995 mm Pgodpfx Agetrtztsxjk Width: 1,250 mm Height: 1,550 mm

Stanje: rabljeno, Popolnoma avtomatski bočni varilni stroj za pakiranje izdelkov – ne glede na njihovo dolžino – z popolnim ovijanjem in brez prekrivanja folije. Z novim prečnim varilnim letev. Spletni video pregled preko WhatsApp - MS Zoom - Telegram Pgedpfx Agjxcufdsxsk Na zalogi v Emskirchn/Nürnberg – Na voljo takoj – Možnost preizkusa.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Manufacturer: Kallfass GmbH Type: Compact Shrink Wrapper KC 8060/650 Universal Year of Manufacture: 2014 Dimensions: approx. 3550 x 1350 x 1450 mm (LxWxH) Weight: approx. net 690 kg / gross 790 kg Technical data: Sealing frame dimensions: 800 x 600 mm Film roll width: max. 750 mm Working height: 870 - 970 mm Podpfxsx H R Nio Agxsgk Passage height: 100 - 400 mm Power supply: 380 V three-phase Easy-to-use L-sealer, combined with shrink tunnel. Especially robust design for industrial use. Sealing frame dimensions: 800 x 600 mm. Proven impulse sealing technology with PTFE-coated cutting/sealing wire for absolutely odorless operation. Equipped with a closing mechanism as a pressing automatic to precisely maintain the set sealing time and to enable trouble-free sealing, even of thick films. Inspection and demonstrations are possible by appointment at our premises. Functional guarantee, no warranty.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, višina izdelka (maks.): 400 mm, največja širina izdelka: 450 mm, Stroj za pakiranje v skrčljivo folijo Proizvajalec: Kallfass Tip: Pack JET 1000/450 SIM + Universal 450 N CE oznaka Pakirna linija za transportna pakiranja / ovijanje, npr. profiliranega lesa, letvic ipd. Pgedpfxoyinzgs Agxsk Linija izvira iz obrati za proizvodnjo talnih desk in panelov. Sestavljena iz: - vhodnih valjčnih prog - stroj za ovijanje v folijo - skrčljivi tunel - izhodne valjčne proge Širina prehoda ca. 450 mm Višina prehoda ca. 400 mm Napredovanje neprekinjeno nastavljivo, max. ca. 20 m/min Stisnjen zrak 6 bar Vključno z nekaj rolami pakirne folije, če so na voljo.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Fully automatic flow wrapping machine for packaging products – regardless of their length – with complete wrapping and without film overlap. Product feeding is carried out via a conveyor belt while simultaneously enclosing the product in a center-folded film using a forming shoulder. Product indexing is achieved through a photoelectric sensor. The infeed conveyor can be easily adjusted for different product widths. Longitudinal sealing is carried out by a continuous side sealing unit. The height position of the forming shoulder and sealing units can be manually adjusted. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is in full working order. Technical data: Cross sealing bar: 450 mm Film: center-folded film, approx. 12–80 µm Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Min. product length: 120 mm Min. product width: 80 mm Pass-through height: 200 mm Working height: 780–930 mm Power supply: 400 V three-phase, 50 Hz, with protective earth Rated power: 3.5 kVA Rated current: 5.1 A Tunnel pass-through width: 650 mm Tunnel pass-through height: 200 mm Inspection and demonstrations can be arranged by appointment at our premises. Functional guarantee, no warranty. Pgodpfx Aow U A Eqjgxok

Leto izdelave: 2005, stanje: dober (rabljeno), As the machine is equipped with numerous special options and technical features (e.g. electromechanical welding frame closure, motor-driven film holder, product conveyor belt with adjustable speed, and much more), it is particularly well-suited for flexible service provider applications. The machine has been fully overhauled and cleaned. Psdpfx Agsmcw T Ejxogk If you are interested, a viewing appointment including a packaging sample demonstration can be arranged. The price is ex works, unpacked, and subject to VAT.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 250 mm, stružna dolžina: 1.000 mm, premer struženja: 400 mm, izvrtina vretena: 52 mm, največja hitrost vretena: 1.810 obr/min, hitrost vretena (min.): 65 obr/min, moč vretenovega motorja: 2.200 W, skupna višina: 1.650 mm, skupna dolžina: 1.900 mm, skupna širina: 830 mm, vrsta vhodnega toka: trifazni, skupna masa: 790 kg, Key Features Precision Tapered Roller Bearings for the Spindle The spindle is equipped with high-precision roller bearings, ensuring high machining accuracy and reliable operation even during intensive use. Hardened and Ground Gears in the Headstock All gears in the headstock are made of high-quality steel, hardened and ground. This guarantees smooth, quiet running and a long service life. Easy and Quick Gearbox Operation The intuitive gearbox design allows for quick and comfortable speed changes as well as easy adjustment of operating parameters. Powerful Drive Motor The machine is equipped with a powerful motor that ensures stable operation even under heavy load. D1-5 Camlock Spindle Mount The spindle system with D1-5 Camlock allows for fast and secure mounting of chucks and accessories. Wide Thread Cutting Range The machine enables cutting of various thread types (metric, imperial, module and others), making it extremely versatile. Technical Specifications 🔩 Turning Capacities Swing over bed: 400 mm Swing over cross slide: 250 mm Swing in bed gap: 520 mm Distance between centers: 1000 mm Max. workpiece length (chuck + tailstock): ~920 mm 🛠️ Slides and Travel Top slide travel: 125 mm (accuracy 0.02) Cross slide travel: 240 mm (accuracy 0.04) Longitudinal travel: 750 mm (0.2) ⛓️ Drive and Speeds Main motor power: 2.2 kW / 400 V Coolant pump power: approx. 40 W Spindle speeds: 18 steps (I/II) 65 – 1810 rpm 🧰 Threads and Feeds Metric threads: 0.4 – 7 mm Imperial threads: 4 – 60 TPI Module threads: 0.4 – 3 mm DP threads: 8 – 84 DP Longitudinal feed: ~0.053 – 1.291 mm/rev Cross feed: ~0.011 – 0.276 mm/rev 🧱 Construction and Spindle Bed width: 218 mm Spindle bore: 52 mm Spindle taper: MT6 Spindle mount: D1-5 Camlock Tailstock: Quill diameter: 50 mm Quill stroke: 110 mm Taper: MT4 📏 Dimensions and Weight Machine dimensions (L × W × H): approx. 1900 × 830 × 1650 mm Weight: approx. 640 – 790 kg (depending on equipment) Standard Equipment 2-axis digital readout (optical linear scales) 200 mm 3-jaw chuck + set of inside jaws 200 mm 4-jaw chuck 280 mm faceplate Fixed steady rest Travelling steady rest 2 fixed center points MT4 Reducing sleeve spindle MT6 / MT4 Set of change gears Coolant system Work light Lubrication pump Chuck key and tool post key Set of service tools Safety covers according to CE standards User manual (Polish) Psdpeyr Ihljfx Agxsgk CE Declaration of Conformity Delivery to customer available. Transport costs are calculated individually by the haulage company.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 40167, Dražba univerzalnega rezkalnega stroja MAHO! Podpfx Aex Ngkzjgxsgk

Stanje: rabljeno, Leto izdelave: 1997, potovalna razdalja osi X: 3.708 mm, pomik osi Y: 1.208 mm, pomik po osi Z: 1.002 mm, dolžina podajanja os X: 5.000 mm, dolžina pomika po osi Y: 5.000 mm, dolžina podajanja os Z: 5.000 mm, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 35 obr/min, CNC Bed Milling Machine - Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical Data: X-travel: 3708 mm Y-travel: 1208 mm Z-travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35 - 3000 rpm Pgsdpfx Aowtpfpogxjk Spindle motor: 22 kW Feed rate: 6 - 5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/- 120° (stepless) Milling head in the rear axis automatically swivelling / swing 90° Coolant system Machine can be inspected under power. Availability: immediately Sale from location Westerkappeln Dismantling and loading can be arranged upon request.

Stanje: novo, lastna masa: 680 kg, največja dovoljena obremenitev: 2.320 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.030 mm, barva: srebrn, gradbena višina: 830 mm, delovna širina: 2.040 mm, Hydraulics, automatic reverse mechanism, full aluminum floor / winch / loading ramps, hot-dip galvanized, * IMMEDIATELY AVAILABLE * incl. full aluminum floor / winch / loading ramps Technical Data: - Type: New vehicle - Inspection (TÜV): New/2 years - Availability: IMMEDIATE! - Permissible total weight: 3,000 kg - Unladen weight: 680 kg - Payload: 2,320 kg - Internal dimensions: 400 x 203 x 0 cm (L x W x H) - Overall external dimensions: 537 x 204 x 83 cm (L x W x H) - Loading edge height: 60 cm - Tyres: 195/55R10 steel rims - Brakes: yes - Jockey wheel: yes, automatic - 100 km/h approval: at extra cost - incl. vehicle registration documents Pgsdju Hrw Hspfx Agxsk Vehicle Construction: - Floor: Full aluminum floor! - Side walls: optional, can be retrofitted - Side wall height: 0 cm - Chassis: High loader, KNOTT rubber suspension axle - Tipping function: no - Hydraulics: none - Loading angle: approx. 13° - Wheel stops: prepared front & rear - Coupling and brake: KNOTT - Frame/chassis: welded steel frame, hot-dip galvanized - Lashing rings: 14 pieces in the floor - Winch: yes, manual, with adjustable winch support - Supports: available at extra cost - Ramps: full steel, grid grating, slide-in, 255 cm long - Lighting connector: 13-pin - Approval: COC documents Standard Equipment: - 18mm aluminum floor – extremely robust - Preparation for side walls - Cable winch with winch support standard - Cable winch removable and insertable on the left or right, length adjustable - Very sturdy welded steel frame - Frame fully hot-dip galvanized by immersion - Many sturdy crossmembers for high point loads - Additional longitudinal beams fully welded - 14 lashing rings inside the loading area - Steel grating ramps, 255 cm, can be slid under the loading area - Automatic reversing mechanism - KNOTT coupling head and parking brake - KNOTT cast coupling head - Very robust reinforced V-drawbar - 13-pin plug - Reversing light - Large dimensioned safety lighting - Integrated rear fog light - Tail lights recessed in rear frame - Automatic jockey wheel central - Vehicle documents: ZBII and COC documents Optional accessories, available on request: - 100 km/h approval with shock absorbers - Anti-theft protection - Side walls - Wheel chocks - Spare wheel - Storage box - Rear supports - High tarpaulin - Additional lashing rings - Reversing spotlight - Lashing straps - And much more New vehicle with warranty and inspection (TÜV). We are pleased to offer you suitable financing! Descriptions and images are copyright protected!! Over 800 trailers immediately available from us! For more than 30 years, authorized dealer & repair workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Delivery within Germany available for a surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions, and prior sale excepted.

Stanje: rabljeno, Leto izdelave: 1905, Body type: Eisemann G4000P generator, 230 V single-phase, 14.8 A, 3.4 kVA, Pmax 3.7 kVA, 3000 rpm, 50 Hz, insulation class F / 70 dB(A). Engine: Honda GX 240 (240 cc), weight: 62 kg Sale to businesses only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION SUBJECT TO CHANGE, INCLUDING EQUIPMENT AND ACCESSORIES. Pgsdpfjiadmrjx Agxjk

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 18262080, lastna masa: 580 kg, največja dovoljena obremenitev: 2.120 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.150 mm, barva: črn, Leto izdelave: 2026, Lademaß ca. 2150 mm x 4000 mm Außenmaße ca. 2160 mm x 5550 Pgedpfsvr S Edsx Agxjk zulässiges Gesamtgewicht: 2700 kg Nutzlast: ca. 2120 kg (Nutzlast variiert je nach Zusatzausstattung) Hersteller: Temared Besonderheiten - Autotransportanhänger "Universal" - Stahlrahmen (geschraubt) - Rampenschacht unter der Ladefläche - Auffahrrampen (Stahl) - Seilwinde (manuell) - 8 Verzurrösen in den Seitenprofilen - 2 Verzurrösen im vorderen Rahmenprofil - Weitere Verzurrösen längsseitig im Rahmenprofil weitere Ausstattung - Bodenplatte: Holzboden - Bereifung 195/55R10C - Keile + Halter Fahrwerk - Gummifederachse mit Einzelradfederung | V-Deichsel mit Zugkugelkupplung | Stützrad | Elektrik - 12 Volt | 13-poliger Stecker | Seitenleuchten | Begrenzungsleuchten Sie möchten diesen Anhänger kaufen oder haben weitere Anhänger-Rückfragen dann benutzen Sie bitte unsere interne Autotransportanhänger "Nr.18262080".

Stanje: novo, Leto izdelave: 2026, Industrial metal lathe CORMAK GOLIAT 660 x 4000 mm – features a robust cast iron bed construction and is equipped with a 12-speed gearbox paired with a powerful 7.5 kW / 400V induction motor, ensuring maximum torque and a large spindle bore of 105 mm. Key Advantages: - Centralized feed control system, lead screw and feed shaft for threading operations - Digital readout operates in three movement axes: longitudinal, cross, and top slide. The processed electronic signal from optical encoders displays the axis movement values on the digital screen. - Lathe is fitted with a high-quality, reinforced spindle bearing system. The main spindle uses modern ball bearings for optimal support. - Superior work results are ensured by a large 105 mm spindle bore, 4000 mm center distance, 320 mm 3-jaw chuck, and powerful 7.5 kW motor. - Rapid longitudinal and cross feed systems significantly reduce machining time and improve productivity. - Hardened and precision-ground gears in the spindle gearbox ensure long-term operational stability. - Equipped with a lead screw and feed shaft for thread cutting, as well as automatic longitudinal and cross feeds. - Easy adjustment of spindle speed and automatic feed from the ergonomic control panel on the gearbox. - Ability to machine a wide range of threads without changing gears in the gear train. Wide range of thread types: metric (22) 1–14 mm, imperial (25) 2–28 TPI, module (18) 0.5–7 M.P., DP thread (24) 4–56 D.P. Capable of cutting both right- and left-handed threads. - Thread chasing dial ensures precise revolution counting, saving time during multi-pass operations by allowing manual, quick carriage return to the original position. - The bed is fitted with a removable bridge for machining larger diameter workpieces such as flanges. This lathe model allows machining of workpieces up to 870 mm maximum diameter with the bridge removed. Technical Specifications Max. turning diameter over bed: Ø660 mm Max. turning diameter over carriage: Ø420 mm Max. turning diameter in the gap: Ø870 mm Gap length: 240 mm Distance between centers: 4000 mm Max. turning length: 3950 mm Spindle bore: Ø105 mm Spindle nose diameter/taper: Ø113 mm 1:20 Spindle mount: D1-8 CAMLOCK Spindle speeds: 12 speeds (36–1600 rpm) Number and range of longitudinal feeds: 65 (0.063–2.52 mm/rev) Number and range of cross feeds: 65 (0.027–1.07 mm/rev) Metric threads: 22 (1–14 mm) Imperial threads: 25 (28–2 TPI) Module threads: 18 (0.5–7 mm) Pedsvw Abgspfx Agxsgk DP threads: 24 (56–4 DP) Rapid longitudinal feed: 4.5 m/min Rapid cross feed: 1.9 m/min Lead screw pitch: 12 mm Distance from spindle axis to tool surface: 28 mm Tool size: 25x25 mm Max. top slide travel: 145 mm Max. cross slide travel: 380 mm Tailstock quill diameter: 75 mm Tailstock taper: MT5 Max. tailstock quill travel: 150 mm Tailstock cross travel: ±15 mm Main motor S1/S6: 7.5/9 kW / 400V Rapid feed motor: 250W Coolant pump: 60W, 25 L/min Dimensions (L/W/H): 5500 x 1100 x 1450 mm Weight: 5,200 kg

Stanje: novo, Leto izdelave: 2026, CORMAK 400 metal lathes are the new, improved version of the popular metalworking lathes. Upgrades include an improved tool post guard, spindle bearing system, new digital readout. They are suitable for manufacturing plants, workshops, and toolrooms—ideal for single-piece and small batch production. NEW, ENHANCED MODEL!!! - High-quality and reinforced spindle bearing system - New protection system compliant with CE standards - Latest model of axis digital readout - Reinforced, modernized lathe base with tool drawers and retractable chip tray Machine Features - REINFORCED, RIBBED BED SURFACE ENSURES MAXIMUM VIBRATION REDUCTION, BED IS ALSO PRECISELY GROUND AND HARDENED - 2-AXIS DIGITAL READOUT INCLUDED AS STANDARD - OPTIMAL PERFORMANCE THANKS TO LARGE 52 mm SPINDLE BORE - PROPER BED WIDTH ENSURES STABLE AND PRECISE WORKING CONDITIONS - MACHINE EQUIPPED WITH HIGH-QUALITY, REINFORCED SPINDLE BEARING SYSTEM - EFFICIENT MACHINING WITH TWO AUTOMATIC FEEDS AND FITTED WITH LEADSCREW AND FEED SHAFT - HARDENED GEARS IN THE SPINDLE GEARBOX - ADJUSTABLE OVERLOAD CLUTCH ON THE FEED SHAFT - FULL THREAD RANGE WITHOUT NEEDING TO CHANGE GEARS - FEED SELECTION LOCK: VIA LEADSCREW OR FEED SHAFT - REMOVABLE GAP FOR MACHINING WORKPIECES OF INCREASED DIAMETER - RETRACTABLE CHIP TRAY AND TOOL DRAWERS FOR IMPROVED AND EFFICIENT WORKFLOW Technical Specifications MAXIMUM TURNING DIAMETER: 400 mm MAXIMUM TURNING DIAMETER OVER CARRIAGE: 250 mm MAXIMUM TURNING DIAMETER IN GAP: 520 mm TURNING LENGTH BETWEEN CENTERS: 1000 mm BED WIDTH: 218 mm SPINDLE NOSE: CAMLOCK D5 SPINDLE TAPER: MK6 SPINDLE BORE: 52 mm SPINDLE SPEED RANGE: 65–1810 rpm Pjdpsiz Tczjfx Agxsgk NUMBER OF SPINDLE SPEEDS: 16 ranges LONGITUDINAL FEED RANGE: (40) 0.053–1.291 mm/rev CROSS FEED RANGE: (40) 0.011–0.276 mm/rev MAXIMUM TOOL SIZE: 25 mm x 25 mm METRIC THREAD: 0.4–7 mm INCH THREAD: 4–60 T.P.I. MODULAR THREAD: (22) 0.4–3 mm DIAMETRICAL PITCH THREAD: (28) 8–84 D.P. TAILSTOCK SLEEVE DIAMETER: 50 mm TAILSTOCK SLEEVE TRAVEL: 110 mm TAILSTOCK SLEEVE TAPER: MT4 MAIN MOTOR POWER: 2.2 kW COOLANT PUMP POWER: 0.1 kW WEIGHT: 640 kg DIMENSIONS: 2000 x 820 x 1650 mm Standard Equipment - 2-axis digital readout - Fixed steady rest - Travelling steady rest - 3-jaw chuck 200 mm - 4-jaw chuck 200 mm - Faceplate 280 mm - Fixed center MT4 x 2 - Reducing sleeve MK6/MK4 - Keys For more information, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20225202986, skupna masa: 50 kg, nosilnost: 12 kg, doseg roke: 1.300 mm, vrtilni razpon: 360 °, Oprema: dokumentacija / priročnik, TEHNIČNI PODATKI Nosilnost: 12,5 kg Doseg rok: 1.300 mm Območje vrtenja: 360° PODROBNOSTI O STROJU Širina krmilne omare: 500 mm Višina krmilne omare: 500 mm Vhodna napetost: 240 V Vhodni tok: 8 A Vrsta vhodnega toka: izmenični tok (AC) Skupna teža: 50 kg OPREMA Priročnik Krmiljenje Teach Pendant Psdjy D I Ikepfx Agxegk Originalna embalaža in dokumentacija

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Kallfass stroj za ovijanje neuničljiv in povsem pripravljen za uporabo Pedpfx Agoxz Tryjxogk

Stanje: dober (rabljeno), Vse tehnične podatke najdete na slikah. Po želji je mogoče organizirati prevoz in nakladanje po vsej Evropi za doplačilo. Pgodpfx Agoy H Iigexek Cene so navedene brez DDV. Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam z veseljem pomaga. Stroji nakup/prodaja NAKUP/PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV, ORODJARNIH STROJEV IN DRUGEGA. Potrebujete kakovosten, a cenovno ugoden stroj za vašo proizvodnjo? Ali želite svoj stroj prodati? Za več informacij ali kontakt nas dosežete preko kontaktnega obrazca.

Stanje: novo, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Flange taper Reishauer 0 Grinding wheel dimensions 300 x 145 x 160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) + grinding wheel included T1SP 300x145x160 M 2.5 EW20° 3GG Cubitron by 3M Pgodpfouayy Tox Agxsk Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to machine type Reishauer Profiling according to module m, number of starts gg, pressure angle EW Advantages: - Near-zero risk of grinding burn - Up to 50% shorter grinding times - Dressing effort reduced by a factor of 2 - Double the grinding wheel lifetime - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools

Stanje: novo, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Flange taper Reishauer 0 Grinding wheel dimensions 300x145x160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) + including grinding wheel T1SP 300x145x160 M 1.5 EW20° 3GG by 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to Reishauer machine type Profiling according to specified module m, tooth system gg, pressure angle EW Pedpfxeuayy Hj Agxjgk Advantages: - Grinding burn risk reduced to nearly zero - Up to 50% shorter grinding times - Dressing effort reduced by 2x - Double the grinding wheel tool life - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools

Stanje: novo, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Podpfx Agouayyyjxogk Flange taper Reishauer 0 Grinding wheel dimensions 300x145x160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) + grinding wheel included T1SP 300x145x160 M 2.25 EW20° 3GG by 3M Ceramic grinding wheels for gear flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specified module m, tooth flank quality gg, pressure angle EW Advantages: - Grinding burn risk virtually eliminated - Up to 50% shorter grinding times - Dressing effort reduced by half - Double the grinding wheel service life - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools