Index G200 C nakup rabljenega (56.403)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, moč vretenovega motorja: 22.000 W, skupna višina: 2.050 mm, skupna masa: 4.000 kg, proizvajalec krmilnikov: INDEX, model krmilnika: C200-4 / C200-8, This 5-axis turning-milling center Index G200 C was manufactured in 2000. Consider the opportunity to purchase this Index G200 C turning-milling center. Contact us for more information. Additional Equipment Lasdsyailzjpfx Al Nsa • Synchronous device for sub-spindle machining • Tool carrier 3 for synchronized spindle (backside machining) • Additional milling spindle • Thread milling and polygon turning attachment • Non-gripper tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • with C-axis • No driven tools Machine Advantages Technical Advantages • Space requirement (without bar feeder): 3580 x 3108 mm • Control unit: Resolution: 0.001 mm (input/output/correction) • Extensive travel ranges with multi-axis configuration • High precision with 0.001 mm resolution on the numerical control • Versatile expansion options and additional devices for extended functionality Additional Information Movement Cross Slide 1 (upper) - XYZB axes: X-axis: Travel 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Travel 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotary): 360° swivel range, angle steps 5° (with detent), resolution 0.001° (with clamping), indexing time for 180°: 1 s Cross Slide 2 (lower) - XZ axes: X-axis: Travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Travel 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Right Turret: X-axis: Travel 120 mm Z-axis: Travel 400 mm Tailstock center distance: 400 mm Max force: 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Flow rate: 18 l/min System pressure: 90 bar Fill volume: 70 liters Coolant system: Pump output (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Fill volume: approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal taper / D140 external, optional short taper Sub-spindle: D140 external (only tensile force permitted with collet and chuck clamping) 1: Spindle bore (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle diameter at front bearing: 75 mm (with 30 mm bore) / 85 mm (42 mm) / 100 mm (60+65 mm) Max speed: 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Bar capacity (workpiece diameter): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Max torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Max power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), Swing diameter: 200 mm, turning length: 400 mm, max. turning diameter: 420 mm, bar capacity: 60 mm, max. chuck diameter: 160 mm, spindle speed: 5,000 rpm, turrets: 2, stations: 2 x 14, rapid traverse X/Z: 20 m/min / 30 m/min. Machine dimensions (X/Y/Z): approx. 7,500 mm / 2,100 mm / 2,100 mm, weight: approx. 4,500 kg. Documentation available. An on-site inspection is possible. Ljdpfx Aleu T Rgks Neaa

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Max. turning diameter: 200 mm, max. turning length: 400 mm, spindle speed: 6,000 rpm, bar capacity: 42 mm, weight: approx. 4,300 kg. Laedpfx Aletdwwqo Nsa

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Stroj je v zelo dobrem stanju. Deloval je do konca, zdaj je v skladišču in ni priključen na elektriko. Stroj je 100 % popoln. Lsdowq Rwnopfx Al Nsaa Na voljo sta transportni trak za dele in transportni trak za odrezke. Premer izvrtine vretena 42 mm. 2x 3-čeljustna vpenjalna glava 160 mm 2x Hainbuch vpenjalna glava za vpenjalne puše 42 mm

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2005, Funkcionalnost: nefunkcionalno, stružna dolžina: 600 mm, premer struženja: 140 mm, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 110 mm, pomik po osi Z: 360 mm, model krmilnika: Siemens 840 D PowerLine, Hydraulic unit, main and counter spindle defective TECHNICAL DETAILS Turning diameter: 140 mm Turning length: 600 mm Distance between spindles: 615 mm Travel X-axis: 110 mm Travel Z-axis: 360 mm Travel Y-axis: 70 mm B-axis: 2x +/-1° Rapid traverse (X / Y / Z axis): 25 / 12 / 50 m/min Main spindle Maximum speed: 5,000 rpm Laodpfeyxgc Nex Al Noa Drive power: 20 / 27 kW Maximum torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max bar diameter: 65 mm Spindle bearing diameter: 110 mm Counter spindle Maximum speed: 5,000 rpm Drive power: 20 / 27 kW Maximum torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max bar diameter: 65 mm Travel X-axis: 150 mm Travel Y-axis: 600 mm Spindle bearing diameter: 110 mm Tool turret Quantity: 3 Tool holder: VDI 25 x 48 DIN 69880 Number of tool stations: 3 x 12 Number of driven tool positions: 3 x 12 Max speed driven tools: 6,000 rpm Drive power driven tools: 8 kW Max torque: 16 Nm MACHINE DETAILS Total power requirement: 53 kVA Dimensions & weight Space requirement: 8.0 x 3.5 x 2.5 m Machine weight: 6.5 t EQUIPMENT 2(3) Y-axes +/-35 mm 2 B-correction axes (+/-1°) Chip conveyor Parts catcher Tool breakage control Bar feeder: IRCO Profimat 65.6

Stanje: rabljeno, Leto izdelave: 1996, Tip: Večvreten stružnica Ljdpoyn Hmxefx Al Njaa Proizvajalec: Index Model: G200 Leto izdelave: 1996 Stanje: Rabljeno Količina: 1

Stanje: dober (rabljeno), Leto izdelave: 2006, Leto izdelave od 1998 do 2006 Lsdpfxjypltgs Al Neaa Z lokacije

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC nasprotno-vreteni stružnica Index z Y-osjo in podajalnikom palic MBL 42. Dolžina struženja: 400 mm, premer struženja: 420 mm, prehod palice: 60 mm, hitrost vrtenja: 6000 o/min, dimenzije stroja X/Y: 4750 mm/1950 mm. Dokumentacija je na voljo. Ogled na lokaciji je možen. Lajdpfx Aeym Dgmel Nja

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), Maximum spindle speed: 5,000 rpm, bar capacity: 65 mm, maximum turning diameter: 200 mm, maximum turning length: 400 mm. Number of spindles: 2, tool changers: 2 x 14, Siemens control system. Includes discharge conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), control cabinet with cooling unit, CO2 extinguishing system, and INDEX bar loader. Completely overhauled in 2016. Lsdstdwwmspfx Al Neaa

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 22 kW - Spindle speed: 6000 rpm - Max. bar diameter: 60 mm - Max. machinable diameter: 200 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 Laedpfou Hadhox Al Noa - Spindle drive power: 22 kW - Spindle speed: 6000 rpm - Max. bar diameter: 60 mm - Minimum C-axis resolution: 0.001° - Z travel: 445 mm TURRET 1 - Number of positions: 14 - Number of driven positions: 14 - Travel X/Z: 105/400 mm - Travel Y: 120 mm - B-axis stroke: +90/-270° - Tool type: VDI 25 - Driven tools speed: 6000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 4,975 x 2,890 mm - Machine height: 2,050 mm - Machine weight: 4,800 kg EQUIPMENT - Control: Siemens 840C - Coolant tank * with high-pressure pump - Chip conveyor - Parts removal system - Parts conveyor belt - Bar feeder: LNS

Stanje: rabljeno, CNC multi-spindle automatic lathe INDEX MS 32 C Laedpfjuhaqbox Al Nea

Stanje: rabljeno, TECHNICAL DATA Laedpfx Asuhauyel Nsa - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - Bar feeder magazine: IEMCA SIR MS32/33/P - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Stanje: rabljeno, TECHNICAL DATA SPINDLES - Number of spindles: 6 - Bar passage: 40 mm - Rotational speed: 7,000 rpm - Spindle power: 13 / 24 kW CONTROLLED AXES: 27 - Slide unit 1.1: X and Z axes, NC-controlled - Slide unit 1.2: X and Z axes, NC-controlled - Slide unit 2.1: X and Z axes, NC-controlled - Slide unit 2.2: X and Z axes, NC-controlled - Slide unit 3.1: X and Z axes, NC-controlled - Slide unit 3.2: Z axis, NC-controlled - Slide unit 4.1: X and Z axes, NC-controlled - Slide unit 4.2: Z axis, NC-controlled - Slide unit 5.1: X and Z axes, NC-controlled - Slide unit 5.2: Z axis, NC-controlled - Slide unit 6.1: Z axis, NC-controlled + SCARA axis - Slide unit 6.2: X and Z axes, NC-controlled - Slide unit 6.3: X axis, NC-controlled ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed power: 65 kW DIMENSIONS AND WEIGHT - Footprint: 3,329 x 2,032 mm - Height: 2,654 mm - Weight: 7,100 kg OPERATING HOURS - Power-on hours: 45,965 h - Production hours: 19,065 h ACCESSORIES - Siemens 840D CNC (PL) with dual NCU - 2 CNC operating panels - 6 TOPLUS collet receivers with integrated stop - 1 counter-spindle in position 6.1 - Clamping device on counter-spindle: Röhm chuck KFD-HS 110/3 Laodpfxjuhante Al Nsa - Counter-spindle internal coolant supply - CNC options for counter-spindle / polygon turning attachment - Rear machining system on slide 6.2: 3x fixed - Preparation for 2 additional operations with electronic shaft, positions 1.2.3 - Preparation for 2 additional operations with electronic shaft, positions 4.5.6 - STAUBLI robot, type TX60 (6 axes) - Robot gripper, external double clamping type PZN50 - Swiveling plate (4 positions) - KNOLL coolant tank with articulated chip conveyor, 2 HP pumps at 40 bar - Büschel oil mist extraction system - RIEDEL cooling system - ARTIS preparation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 720052, stružna dolžina: 600 mm, premer struženja: 140 mm, prehod palice: 65 mm, model krmilnika: Siemens 840 D PowerLine, razdalja med vreteni: 615 mm, DÉTAILS TECHNIQUES Lsdpfx Alexg Im Aj Njaa Diamètre de tournage : 140 mm Longueur de tournage : 600 mm Diamètre de barre max. : 65 mm Distance entre broches : 615 mm Vitesse de broche max. : 5 000 tr/min Puissance de la broche principale : 20/27 kW Nez de broche : ISO 702/1 140 mm Diamètre du palier de broche : 110 mm Couple max. : 105/145 Nm Axe C : 0,001 Diamètre de mandrin : 140 - 160 mm Tourelle porte-outils : 3 Axes Y : 2 à 3 axes +/- 35 mm Axes de correction B : 2 axes +/-1 Positions d’outils entraînés : 3 x 12 Prise d'outil : VDI 25 x 48 DIN 69880 Puissance entraînée outils : 8 kW DÉTAILS MACHINE Commande : Siemens 840 D PowerLine Dimensions & Poids Encombrement : env. 8,0 x 3,5 x 2,5 m Poids de la machine : env. 6 500 kg Données électriques Tension nominale : 400 V AC Courant nominal : 101 A Puissance nominale : 59 kW Nombre de phases : 3 Fréquence : 50 Hz Tension de commande : 24 V DC Demande totale de puissance : 53 kVA ÉQUIPEMENT Alimentation automatique de barres Index MBL

Stanje: rabljeno, Single-column hydraulic press SCHÖN Type FES / C 7 Machine No. 4281 Year of manufacture 1995 Pressing force: 7 tons Throat depth: 170 mm Throat depth at rotary indexing station: 60 mm Table size: 310 x 200 mm Rotary indexing table: Ø 400 mm, with 12 indexing stations Ram area: approx. Ø 100 mm Ram plate: 315 x 200 x 35 mm Ram stroke: 100 mm Lajdpfxer I E Itj Al Nja Installation height (rotary table to ram plate): max. 130 mm Table height above floor: 890 mm Ram rapid traverse speed downward: approx. 300 mm/sec. Ram rapid traverse speed upward: approx. 300 mm/sec. Ram working speed: approx. 30 mm/sec. Motor power: 1.5 kW Power supply: 380 Volt, 50 Hz Tank capacity: approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7-1200 - Pneumatic rotary indexing table GECHTER with 12 stations - Mechanically adjustable fixed stop - Adjustable dwell time at BDC - Electric two-hand operation Space requirement (L x W x H): 1450 x 850 x 1900 mm Weight: 700 kg Good condition

Stanje: dober (rabljeno), Index HBF hydraulic pump and oil pump bar feeder Ledpfjd Tx A Tsx Al Nsaa

Stanje: rabljeno, Leto izdelave: 2006, Used INDEX MS 32 C Lathe Equipment: - 2 NCU units - SIR MS32P bar loader with shelves, length 3300 mm, bolted rails - Counter spindle - Complete KNOLL system with 1 high-pressure pump - Bar end control - Programmable inputs/outputs - 4 tool breakage monitors - 1 driven tool drive NCU1 and 3 NCU2 - 1 WTO stroke doubler, 3 positions, motorised on station 1 - 2 drilling units with 6044 motors, included with the machine - Transmit unit Equipment listed below with: CNC axes: 1.1 XZ 1.2 Z 2.1 Z 2.2 XZ 3.1 XZ 3.2 XZ 4.1 XZ 4.2 XZ 5.1 XZ 5.2 XZ 6.1 XZ 6.2 XZ Laedexgh Elspfx Al Nea

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 140 mm Turning length 615 mm Control C200-4D Spindle bore 65 mm Spindle speed 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Turret slides 1, 2 and 3 X-axis travel 110 mm Laodpfewzynqsx Al Nsa Z-axis travel 360 mm Y-axis travel 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Slide travel X-direction 150 mm Slide travel Z-direction 600 mm Spindle speed 5,000 rpm B-axis, B-correction axis +/- 1° Tool turret – number of stations: 3 x 12 Tool holder DIN 69880 VDI 25 x 48 C-axis 0.001° Total connected load 61 kW Machine weight approx. 6.5 t Space requirement approx. 9.75 x 3.10 x 2.85 m Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 for bars with length from 500–3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading system BREUNING ILS-REX-7208, year 2007

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 23109, CNC soustruh s 6 vřeteny Index MS42C Rok výroby: 1998, výrobní číslo: 23109 Řídicí systém: Index Podavač tyčí: Index/Hydag Max. průměr tyče: 42 mm Dopravník třísek a filtrační zařízení s rounem: Knoll CO2 hasicí systém: Kraft & Bauer ----- Laodpfxsyzicws Al Noa Atraktivní nabídka – flexibilně a bez starostí Nabízíme vám nejen kvalitní produkt, ale také financování na míru dle vašich potřeb. Záloha, splátky nebo individuální finanční modely – společně najdeme to pravé řešení. Na přání zajistíme kompletní organizaci přepravy. Od plánování až po spolehlivé doručení garantujeme hladký a včasný průběh, abyste se nemuseli o nic starat. 📞 Kontaktujte nás pro více informací nebo nezávaznou nabídku. Rádi vám poradíme osobně a kompetentně.

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 28102, Torno CNC a 6 husillos Index MS42C Año de fabricación: 2003, número de serie 28102 Control: Siemens Sinumerik Alimentador de barras: lemca SIR-MS52 Ljdpfx Aloyzicks Njaa Diámetro máx. de barra: 42 mm Cinta transportadora de virutas y sistema de filtración de fieltro: Knoll Sistema de extinción por CO2: Kraft & Bauer ----- Oferta atractiva – flexible y sin preocupaciones Le ofrecemos no solo un producto de alta calidad, sino también opciones de financiación a medida que se adaptan a sus necesidades. Ya sea pago inicial, pago a plazos o modelos de financiación personalizados, juntos encontraremos la mejor solución. Si lo desea, también nos encargamos de toda la organización del transporte. Desde la planificación hasta la entrega fiable, garantizamos un proceso sin contratiempos y a tiempo, para que usted no tenga que preocuparse por nada. 📞 Contáctenos para más información o una oferta sin compromiso. Le asesoramos de manera personal y profesional.

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 31102, CNC 6-vretenová sústruh Index MS42C Rok výroby: 2006, sériové číslo 31102 Ovládanie: Siemens Sinumerik Lsdpfxoyzibys Al Neaa Podávač tyčí: Lemca SIR-MS52 Max. priemer tyče: 42 mm Dopravník triesok a filtračné zariadenie na rúnko: Knoll CO2 hasiaci systém: Kraft & Bauer ----- Atraktívna ponuka – flexibilne a bez starostí Ponúkame vám nielen kvalitný produkt, ale aj financovanie šité na mieru podľa vašich potrieb. Či už záloha, splátkový kalendár alebo individuálne finančné modely – spoločne nájdeme vhodné riešenie. Na požiadanie preberieme aj kompletnú organizáciu dopravy. Od plánovania až po spoľahlivé doručenie sa postaráme o hladký a včasný priebeh, aby ste sa nemuseli starať o nič. 📞 Kontaktujte nás pre viac informácií alebo nezáväznú ponuku. Radi vám odborne a osobne poradíme.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 29105, CNC revolverová 6-vretenová sústružnícka linka Index MS42C Rok výroby: 2004, Výrobné číslo: 29105 Riadiaci systém: Siemens Sinumerik Zakladací zásobník: Lemca SIR-MS52 Max. priemer tyče: 42 mm Dopravník triesok a flísový filtračný systém: Knoll CO2 hasiaci systém: Kraft & Bauer ----- Atraktívna ponuka – flexibilne a bez starostí Ponúkame vám nielen kvalitný produkt, ale aj financovanie šité na mieru vašim potrebám. Či už ide o akontáciu, splátky alebo individuálne finančné riešenia – spoločne nájdeme ideálny variant. Na želanie prevezmeme aj kompletnú organizáciu prepravy. Od plánovania až po spoľahlivé doručenie zabezpečíme hladký a včasný priebeh, aby ste sa nemuseli o nič starať. 📞 Kontaktujte nás pre viac informácií alebo nezáväznú ponuku. Lasdoyzibaspfx Al Nsa Radi vám poradíme osobne a odborne.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, največja hitrost vretena: 7.000 obr/min, Premer palice (maks.): 42 mm, potovalna razdalja osi X: 70 mm, pomik osi Y: 70 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 31i-B, število osi: 10, This 10-axis Index C100 horizontal lathe was manufactured in 2018. It features impressive axis travels of 70 mm in the X and Y directions, and 400 mm in the Z direction. The machine is equipped with three turrets with driven tools capable of reaching 8,000 rpm, and a counter spindle diameter of 42 mm. If you are looking for a high-quality turning machine, you should consider the Index C100, which we are offering for sale. Contact us for more details. • Production hours: approx. 15,000 h • Spindles: Main and counter spindles with D42; counter spindle Ø42 mm, 7,000 rpm • Turrets: 3x VDI25 with Index W-gearing; driven tools on all three turrets, up to 30 powered tool positions, 8,000 rpm • Coolant system: Emulsion; flushing next to main and counter spindle; through the counter spindle; 8 bar pump; 18 bar booster pump (no Eco Fluid 80 bar); mechanical coolant filter (no paper filter); coolant tower for the cooling of main/counter spindles and control cabinet • Software/Functions: Milling cycles Transmit / Tracyl • Monitoring: Index Motorforce tool monitoring for Fanuc • Interfaces/Preparation: Ünimag4 interface for bar feeder; preparation for oil mist extraction system (mechanical flange D200 mm; electrical Harting connector 3x240 V) Lasdpfx Aloyuwyvo Nea • Clamping: SK45 in the main spindle (without collets); E173 in the counter spindle (without collets) • Storage/Condition: The machine is stored under power in a heated warehouse Additional equipment • Bürener chip conveyor, 840 mm height, hinged chain type • Handling unit with 2-finger gripper for finished parts and remnants • Conveyor belt for finished parts with flap for remnants • Bar feeder: LNS, 1,500 mm Technical Specification Counter spindle: Yes

Stanje: dober (rabljeno), Leto izdelave: 2002, CNC večvretenski stružni stroj Proizvajalec: INDEX Model stroja: MS 42C Krmiljenje: Siemens SINUMERIK 840C Letnik izdelave: 2002 Število krmiljenih osi: 12 Število vreten: 6 TEHNIČNI PODATKI Vreteno - Premer prehoda palice (mm): 42 - Največje število obratov (obr/min): 5.000 Laodpfxjy Ak S Ns Al Nea OPREMA + 12 linearnih osi + Centralni hladilni sistem + Centralno avtomatsko mazanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 6.000 obr/min, pomik po osi Z: 700 mm, moč vretenovega motorja: 32.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: C200-sl, število osi: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning. This machine is ideal for precision and efficiency in metalworking, providing a significant upgrade for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for further information. Additional Equipment • Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control. • Environmental data: Noise level: 73.8 dB(A) Machine Advantages Technical Advantages • Control system: Based on SINUMERIK 840D SolutionLine (SL) with SINAMICS S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operating interface in German. • Interfaces: 4x USB 2.0 (2 on the control panel, 2 in the panel). Network enabled for NC data transfer (logical drives). • Safety: Siemens Safety Integrated (ProfiSafe). • Turret mechanics: Hydraulic locking, AC motor with spur gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm. • Tool holder: Cylindrical shank D25x48 (DIN69880) with W-slots for higher repeat accuracy. Driven tools possible at every station (can only be rotated in working position). • Cooling unit: 13 kW for hydraulics, spindles and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, 25% glycol). • Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter container, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps. • Interface for bar loader: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with switch for finished parts/cut-offs. Additional Information Control Panel Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Nominal output: 54kW Connected load: 65kVA Rated current: 94A Max. pre-fuse: 100A Main Drive Main and counter spindle Spindle head mount: OD 140mm, ID 85mm Front bearing diameter: 110 mm Lsdpfsyyuvtsx Al Noaa Max. torque (100%/40%): 125/170 Nm Min./max. clamping pressure: 8/80 bar Piston area pressure: 57 cm² Piston area tension: 57 cm² Max. clamping force: 45,600 N Max. traction force: 45,600 N C-Axis: Drive: Spindle hollow shaft motor; direct spindle angle measurement system Position deviation (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool Carrier 1 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 320 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 2 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 550 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 3