Ifm A 300 Da0001 nakup rabljenega (85.962)

Stanje: dober (rabljeno), Underspeed Monitor, Standstill Monitor, Standstill Monitoring, Safety Relay - Manufacturer: ifm, Standstill Monitoring Safety Relay Crsdpjb A Hb Ajfx Ac Noc - Model: DA0001 A300/230VAC - Price: per piece - Quantity: 7 available - Dimensions: 55/80/H110 mm / box 150/110/H65 mm - Weight: 0.3 kg/unit

Stanje: rabljeno, Profibus single module for PLC control, fieldbus, PROFIBUS - Manufacturer: ifm - Model: ecomat300 AC5215 - Quantity: 36 modules available - Price: per unit - Weight: 0.15 kg/unit Cedpfob Nkvcjx Ac Nsrc

Stanje: dober (rabljeno), Inductive sensor, electronic sensor Crsdpfxsd Tqkbj Ac Nsc - Manufacturer: IFM - Product type: IFA3002-BPKG/US-100-DPS - Weight: 30 g

Stanje: zelo dobro (rabljeno), Induktivni senzor, elektronski senzor, bližinsko stikalo, magnetni senzor, magnetni varnostni senzor, senzor za magnetno polje, senzor za valj -Proizvajalec: ifm, Induktivni senzor bližinsko stikalo Ovp -Tip: IEA3002BHBPKG/IE5260 Crodpfx Aoxwpiysc Nsc -Dimenzija škatle: 95/65/V30 mm -Teža: 0,1 kg

Stanje: dober (rabljeno), Inductive sensor, electronic sensor - Manufacturer: IFM - Product type: IGA3008-APKG - Quantity: 3 available - Price: per unit Crsdpfxob A E Uvj Ac Nec - Weight: 0.2 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, vhodni tok: 25 A, vhodna frekvenca: 50 Hz, PROFILNA BRUSILKA FLADDER 300/L.S.4 Csdoyrqzbepfx Ac Nsrc Leto izdelave: 1996

Stanje: dober (rabljeno), Leto izdelave: 2001, Fladder 300/GYRO je stroj za obdelavo ravnih površin (npr. pločevine, aluminijasti, jekleni ali plastični elementi). Uporablja se predvsem za: odstranjevanje robov (odstranjevanje ostrih robov), čiščenje površin po laserskem ali plazemskem rezanju ali prebijanju, zaokroževanje robov, pripravo površin za barvanje/premazovanje, odstranjevanje rje, lusk in ostankov oksidov. Tehnični podatki: Model: Fladder 300/GYRO-1300 VAC Credpjw Uabpefx Ac Nsc Delovna širina: 1300 mm Napajanje: 3 × 400 V, 50 Hz Poraba toka: 63 A Stopnja zaščite: IP54 Motorji: neodvisni pogoni za delovne enote in trak Hitrost podajalnega traku: nastavljiva Sistem GYRO: orbitalno-rotacijske delovne glave (enakomerno odstranjevanje robov in končna obdelava površin) Oprema: tračni transporter z odsesavanjem prahu (VAC), upravljalna plošča, gumb za nujni STOP Leto izdelave: 2001 Stroj v dobrem tehničnem stanju Kompleten, pripravljen za delo Možnost ogleda na kraju samem

Stanje: dober (rabljeno), 2 vozička 1000x1000x2000 mm; skupne mere 1500x2600x3500 mm; napajanje 400 V; gre moč skupno 60 kW; grelna moč 54 kW; motorji 2x2,2 kW; nov računalnik; zunanji generator dima. Crodpfx Aed Sk N Asc Noc

Stanje: dober (rabljeno), Fibre optic light sensor Crodpfxob A Scte Ac Njc -Manufacturer: IFM -Type: FT-30-A-A-R8 -Quantity: 4 units available -Price: per piece -Weight: 0.2 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Pressing force 300 t Stroke 500 mm Distance between columns 1250x1000 mm Daylight opening 1000 mm Rapid approach speed 22 mm/s Working speed 2 mm/s Motor 7.5 kW Length 2000 mm Width 1500 mm Height 3300 mm 4-column guide Round ram guidance Table and ram with T-slots Two-hand operation Cedpfx Asvgncnoc Norc Manual Siemens touchscreen control and new electrical control cabinet Up to 50 programs storable, programmable for: - Upward and downward stroke quantity - Dwell time at bottom dead center - Decompression time - Working pressure adjustment - Piece counter - Pre-stop for upward and downward motion - Selection between manual and automatic operation - Alarm and fault management

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Cutting diameter: 300 mm Saw blade length: 3660 x 27 x 0.9 mm Cutting capacity at 90 degrees (flat): 320 x 290 mm Cutting capacity at 45 degrees (round): 290 mm Cutting capacity at 45 degrees (flat): 260 x 280 mm Cutting capacity at 60 degrees (round): 200 mm Cutting capacity at 60 degrees (flat): 180 x 170 mm Coolant capacity: approx. 100 l Control system: PLC Total power requirement: 2.4 kW AC Weight: 904 kg Dimensions (L x W x H): 2410 x 1920 x 2020 mm Machine in well-maintained condition Original price approx. €22,000 Special price on request Equipment: - Robust electro-hydraulic miter bandsaw, fully automatic (INDUSTRIAL) Codsy Uy S Aopfx Ac Njrc * Fully automatic operation with automatic material feed * Material feed unit with ball screw spindles - Including MITSUBISHI PLC control unit * 20 programs available, each programmable with 15 cut lengths and quantities - For angles from 0° to 60°, with ball-bearing turntable * Miter cuts up to 45° possible in automatic mode * Miter cuts up to 60° possible in semi-automatic mode * Manual miter angle adjustment * Infinitely variable miter angle setting - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Heavy-duty machine bed and torsion-resistant saw arch - Infinitely variable saw blade speed - Coolant device - Operating manual for machine and control included * Special accessories included: - 1x PEGAS chip conveyor - Spare saw blades

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 10/2019, skupna dolžina: 14.040 mm, skupna širina: 2.600 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, medosna razdalja: 8.910 mm, barva: bela, Leto izdelave: 2019, Oprema: dvižna zadnja plošča, = Weitere Optionen und Zubehör = - Hecktüren - Hubachse - Luftfederung Csdeza Shfopfx Ac Nsrc - Nebelleuchten - Scheibenbremsen = Weitere Informationen = Achskonfiguration Reifenmaß: 385/65 R 22.5 Bremsen: Scheibenbremsen Federung: Luftfederung Hinterachse 1: Max. Achslast: 9000 kg; Reifen Profil links: 95%; Reifen Profil rechts: 95% Hinterachse 2: Max. Achslast: 9000 kg; Reifen Profil links: 40%; Reifen Profil rechts: 40% Hinterachse 3: Liftachse; Max. Achslast: 9000 kg; Reifen Profil links: 20%; Reifen Profil rechts: 20% Gewichte Leergewicht: 8.368 kg Zuladung: 30.632 kg zGG: 39.000 kg Funktionell Ladebordwand: DHOLLANDIA DHSM.30, unterfahrbare Klappe, 2500 kg Marke des Aufbaus: THERMO KING SLX i300 Kühlmotor: Diesel und elektrisch (4463 Betriebsstunden Diesel; 25 elektrisch) Wandstärke: 5 mm Zustand Technischer Zustand: sehr gut Optischer Zustand: sehr gut Identifikation Kennzeichen: OT-51-RG

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Two complete blister packaging lines from the pharmaceutical industry are available. 1.1) Automatic case packer IMA CP 28 BA, year of manufacture: 2000, min. carton dimensions L/W/H: 220mm/120mm/120mm, max. carton dimensions L/W/H: 600mm/400mm/350mm, output: 8 cartons/min, machine dimensions L/W/H: approx. 4900mm/1900mm/2650mm, weight: approx. 1500kg. 1.2) Bundle wrapping machine IMA BFB MS 300 A with stretch banding, year of manufacture: 2005, bundle length range: 20mm-360mm, bundle width range: 55mm-220mm, bundle height range: 55mm-220mm, output: approx. 40 bundles/min, max. film roll diameter: 300mm, machine dimensions L/W/H: approx. 2900mm/1300mm/1950mm, weight: approx. 1500kg. 1.3) Mini robot. Total system dimensions L/W/H: 10750mm/2350mm/2250mm, transport weight 1/2: approx. 4700kg/5000kg, total weight: approx. 10000kg. Shrink tunnel not included. 2.1) Blister packaging line IMA Giant 1 BH 100 A, year of manufacture: 2006, products: tablets/capsules, design: modular, max. packaging output: approx. 350 blisters/min, max. blister dimensions L/W/H: 90mm/145mm/12mm, max. carton dimensions L/W/H: 100mm/155mm/105mm. System dimensions L/W/H: approx. 7100mm/1300mm/2250mm. Documentation available. On-site inspection possible. Preferably to be sold as a package. Expected to be available from October 2026. Codpjy I Acqofx Ac Norc

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Italy Price: €120,000 Leasing rate: €2,268 Pressing force: 300 t Stroke: 500 mm Ram: 1000 x 500 mm Table: 1200 x 800 mm Installation height: 600 mm Throat depth: 400 mm Rapid traverse: 22 mm/s Working speed: 2 mm/s Motor: 7.5 kW Length: 2300 mm Width: 1500 mm Height: 3100 mm Weight: 11,200 kg 4-fold round guidance Table and ram with T-slots Two-hand operation Siemens PLC Pressure gauge Operating manual Light barrier Price: on request Siemens control unit for programming the stroke and pressing time Price: on request Siemens touchscreen control, 50 programs storable, programmable for: - Upstroke and downstroke ratio - Dwell time at bottom dead centre - Decompression time - Working pressure adjustment - Piece counter - Prestop in upstroke and downstroke - Configuration for manual and automatic operation - Alarm and anomaly management Price: on request Hour counter Price: on request Piece counter Price: on request Decompression valve Price: on request Oil cooler with decompression valve Price: on request Crsdpfoynm H Ejx Ac Noc Pressure switch Price: on request

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Cedpfx Acoiyyf Ij Njrc Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: novo, Condition: New Delivery time: Approx. 4 months from order placement Country of origin: Italy Price: €172,500 Lease rate: €3,260.25 Pressing force: 300 t Stroke: 500 mm Clearance between columns: 1250 x 1000 mm Daylight opening: 600 mm Rapid traverse: 22 mm/s Working speed: 2 mm/s Motor: 7.5 kW Length: 1750 mm Width: 1500 mm Height: 2800 mm 4-column design Round ram guide Table and ram with T-slots Two-hand operation Siemens PLC Pressure gauge Operating manual OPTIONS: Light curtain € on request Siemens touchscreen control, up to 50 programmable programs, for configuring: - Upstroke and downstroke quotas - Bottom pause time - Decompression time - Working pressure setting - Piece counter - Pre-stop for upstroke and downstroke - Setting for manual and automatic operation - Alarm and fault management € on request Hour counter € Crjdpfswir Acex Ac Nsc on request Piece counter € on request Decompression valve € on request Oil cooler with decompression valve € on request Pressure switch € on request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Vakuumska črpalka / Vakuumski sistem Volumenski pretok: 280 m3/h Motor: 7,5 kW Vakuumska posoda: 500 L Crsdpsxcb Ixefx Ac Nsc

Leto izdelave: 2023, obratovalne ure: 5 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 105 mm, število rezil: 12, premer rotorja: 300 mm, številka stroja/vozila: 20711, GETECHA Granulator / Mlin za plastiko ob stroju (Konfiguracija A 2.2.2) Uporaba: Profesionalni mlin za drobljenje ob brizgalni ali kot manjši centralni mlin za reciklažo livnih kanalov in srednje velikih plastičnih delov. Ima povišano ogrodje za enostaven izpust materiala v vreče ali posode. Tehnične specifikacije: Rezkalni sistem: - Premer rotorja: 300 mm - Dolžina rezanja: 105 mm - Število rotor nožev: 10 (HSS) - Število statorskih (fiksnih) nožev: 2 - Tip rezanja: Škarjasta geometrija (zmanjšuje nastajanje prahu, hrup in porabo energije) - Hitrost vrtenja: cca. 230 min⁻¹ Učinkovitost: - Prostornina predelave: cca. 80 kg/h (odvisno od materiala in velikosti sita) - Sito: 6 mm (okrogle perforacije) Pogonski sklop in moč: Cedpfxsyv A A Ts Ac Norc - Moč motorja: 5,5 kW - Električni priklop: 3 x 400 V + N, 50 Hz Dimenzije in teža: - Dovodna odprtina v komoro: 450 x 335 mm - Teža: cca. 420 kg Barvna izvedba: RAL 7035 (siva) / RAL 5015 (modra) Konfiguracijske značilnosti (različica A 2.2.2): - Visoko postavljeno ogrodje: Konstrukcija v višji izvedbi za ergonomski izpust materiala. - Ročno vtočišče: Zvočno izoliran lijak z veliko vtočno odprtino (450 x 360 mm). - Izpustni sistem: Gravitacijski izhod, optimiziran za zbirne vreče ali zabojnike. Ključne prednosti: - Vrhunsko rezanje: Škarjasti rotor z 10 rezili zagotavlja kakovosten mleti material z minimalnim deležem finih delcev. - Enostavno vzdrževanje: Konstrukcija za hiter dostop omogoča hitro menjavo sita in nastavitev nožev, idealno za pogoste menjave materiala ali barve. - Zaščita pred obrabo: Opcijsko je na voljo obrabno odporen premaz za obdelavo materialov, ojačanih s steklenimi vlakni (GF).

Stanje: dober (rabljeno), Hydraulic power unit, hydraulic pump, universal unit, hydraulic station, hydraulic torque pump, torque wrench pump -Manufacturer: HAWE, hydraulic power unit -Type: MP 24-H 1.77/B 5-A 1/300- -Motor: 0.55 kW / 1390 rpm / 380 V -Pressure: up to 310 bar Crsdpfxsivqm Ee Ac Noc -Flow rate: 1.73 l/min -Single components: see photos -Dimensions: 325/160/H295 mm -Weight: 19 kg

Stanje: rabljeno, Screw Vacuum Pump - Unused Manufacturer: Alcatel / Adixen Model: A 300 P Motor: 380-460V Crjdpfx Aocw Idaoc Noc Condition: Used; As-new Warranty: 12 months Pumping Speed: 320 m³/h Connection: ISO-K 63 Ultimate Pressure: approx. 1.2×10⁻² mbar (abs.) Includes: Operating manual

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Cutting diameter: 300 mm Saw band length: 3660 x 27 x 0.9 mm Cutting range at 90 degrees (flat): 320 x 290 mm Cutting range at 45 degrees (round): 290 mm Cutting range at 45 degrees (flat): 260 x 280 mm Cutting range at 60 degrees (round): 200 mm Cutting range at 60 degrees (flat): 180 x 170 mm Coolant capacity: approx. 100 l Control: PLC Total power requirement: 2.4 kW AC Weight: 904 kg Dimensions (L x W x H): 2410 x 1920 x 2020 mm In well-maintained condition. Original price approx. 22,000 euros. Special price upon request. - Fully inspected - Machine video - ?v=LAhu_AI9J5A Equipment: - Heavy-duty electro-hydraulic mitre band saw, fully automatic (INDUSTRIAL) * Fully automatic operation with automatic material feed * Material feed unit equipped with ball screw spindles - incl. MITSUBISHI PLC control unit * 20 programs, each programmable with 15 cutting lengths and quantities - For angles from 0° to 60°, featuring a ball bearing turntable * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Infinitely variable mitre angle setting - Saw band guides made from carbide plates - Saw feed can be continuously regulated via fine throttle - Robust machine base and twist-free saw arch - Stepless speed adjustment for the saw band - Coolant system - Operating instructions for both the machine and control unit Cjdpjx A H T Hsfx Ac Nerc * Special accessories included: - 1x PEGAS chip conveyor - Replacement saw bands

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 04032026/040036S, Hochleistungs-Trocknungssystem bestehend aus dem LUXOR 400 Trockenluft-Generator sowie zwei isolierten LBA 300-H Trocknungstrichtern (je 300 Liter). Ausgelegt für den Dauerbetrieb in großvolumigen Kunststoffverarbeitungsbetrieben, gewährleistet diese Konfiguration eine präzise Trocknung hygroskopischer Granulate mit hohem Durchsatz und konstanter Taupunktregelung. Das System verfügt über einen Doppelbett-Adsorptionstrocknungszyklus mit automatischer Umschaltung, für unterbrechungsfreien Betrieb. In Kombination mit Luft-Luft-Wärmetauschern bietet die Anlage eine energieeffiziente Performance. Der LUXOR 400 unterstützt die Verwaltung mehrerer Trocknungstrichter,inklusive präziser Steuerung und individueller Parametrierung für jeden Behälter. Ideal für anspruchsvolle industrielle Anwendungen, bei denen Energieeffizienz, Prozesssicherheit und Materialqualität im Fokus stehen. Crodpfsw Dpurox Ac Njc _____ Technische Daten: Trockner: MOTAN LUXOR 400 • Trockenluftvolumenstrom: bis ca. 400 m³/h • Regenerationssystem: Doppelbett mit automatischer Umschaltung • Heizleistung: ca. 22 kW • Stromversorgung: 3/N/PE 400 V, 50 Hz • Steuerung: Bedienfeld OP7 / LOGO! / SPS abhängig von Konfiguration • Baujahr: 2004 • Gewicht: ca. 400–450 kg (ohne Trichter) Trocknungstrichter: 2x MOTAN LBA 300-H • Inhalt (je): 300 Liter • Heizleistung (je): 4,5 kW • Spannung: 3/PE 400 V • Integrierte Luft-Luft-Wärmetauscher für energiesparenden Betrieb • Isolierte Edelstahlkonstruktion • Rückluftanschlüsse zum Trockenluft-Generator • Gesamtsystemkapazität: 600 Liter _____ Hauptmerkmale: • Dauerbetrieb mit niedrigem Taupunkt • Energieeffizient durch integrierte Wärmerückgewinnung • Geeignet für großvolumige Materialtrocknung • Für Mehrschichtbetrieb und automatisierte Produktion einsetzbar • Optional integrierbar in Förder- und Rezepturverwaltungssysteme

Stanje: rabljeno, Welding rectifier, electrode welding unit, electrode welding machine, electrode welding rectifier - Welding current: max. 300 A - Welding cable with electrode holder - Ground cable - Quantity: 1 welding unit available - Dimensions: 600/1230/H930 mm - Weight: 294 kg Crjdod I Szqopfx Ac Nec

Stanje: dober (rabljeno), TIG welding machine, inverter welding machine, TIG welder, inverter welder - Manufacturer: Jäckle, water-cooled TIG welding machine - Model: WIG 301i DC Cedpsqwprnsfx Ac Norc - Welding current: max. 300 A, see rating plate - Cooling unit: KG 2 - Accessories: incl. ground cable, hose package - Dimensions: 730/620/H1180 mm - Weight: 73 kg

Stanje: rabljeno, Pneumatic cylinder, air cylinder, standard cylinder, clamp cylinder -Manufacturer: Festo -Type: DNC-32-300-PPV-A -Piston diameter: 32 mm -Stroke: 300 mm -Pressure: max. 12 bar Crjdpfx Aod Nhinjc Nec -Dimensions: 455/45/45 mm -Weight: 1.5 kg