Hsm Vk 8818 nakup rabljenega (380)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Iijdsyz Af Ejpfx Abxoc Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, Technical data: Press force: 1,000 kN Specific press force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency controlled Voltage/Frequency: 400 V / 50 Hz Cycle time (idle): 8.3 s Idle capacity (theoretical): 643 m³/h Capacity at 50 kg/m³ (theoretical): 32.15 t/h Feed opening width x length: 970 x 1,800 mm Bale width x height x length: 1,100 x 750 x 600–2,000 mm Maximum bale weight: 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with associated shaft covers - 1 support structure and maintenance platform for conveyor and hopper - 1 STADLER feeder - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500 kg soft wire coils - 10 wire reel trolleys - 1 multi-control system for the baler - Full set of design documentation and maintenance history - Maintained and serviced by the manufacturer Commissioning upon request. Weight: 33,000 kg Binding type: Wire Processable materials: Plastic film, mixed paper, cardboard, hollow containers made of HDPE/LDPE, and plastic bottles Iisdpfx Aboygud Aoxec The system is operational and can be inspected while running. The machine will be dismantled on 16.02. and can be inspected at our premises thereafter. Available immediately!

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 990 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 23.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), volumenski pretok: 643 m³/h, Good day, We hereby offer, without obligation, a used baling press including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we do not assume any liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Iijdpfeymmtcjx Abxec Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions including conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be viewed in operation with material feed. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 11.850 h, stiskalna sila: 88 t, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 23.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), Te koop: gebruikte balenpers + gebruikte transportband Merk: HSM VK 88 + Stadler KF1800 Balenpers is een VK 88 R – FU, met frequentieregelaars, 2 x 45 kW. * Ontblokkeercilinder optie * Kogelgewricht bevestiging hoofd cilinder * Stadler transportband, 1600 mm intern Bouwjaar 2012 11.850 uur Stang hoofdcilinder en afdichtingsset nieuw. Te vervangen: 2 secties van de voorste bodem van de perskamer: het middelste en het voorste gedeelte naar het kanaal toe. Smering / vervanging: Enkele zij-diabolo’s zijn gebruikt en nog in bedrijf, sommige zijn roestig, sommige in goede staat. Pers werkt goed en knoopmechanisme functioneert zoals het hoort. Perswielen OK Pers zijwielen OK Stang hoofdcilinder: vrijwel nieuw Afdichtset hoofdcilinder: vrijwel nieuw Nylon strips aan perszijden: 80–90% goed; geometrie eventueel fine-tunen door het toevoegen van vulringen (klant heeft onderdelen op voorraad). Mes / contrames: goed, 70% Naaldwielen: oké maar vervanging aanbevolen + de sluitplaten. Hoofd frequentieregelaar 1 van 2: In totaal 2 x 45 kW: één is defect. Onbekend of deze nog vervangen wordt. Pers draait momenteel op één pomp. Iedpfsyuyg Sox Abxsic Zijwanden kamer: Zijwanden zijn versleten op de plekken waar de nylon geleideplaten schuiven: slijtage van enkele millimeters tot gemiddeld 2 mm. Transportband: Kettingrollen zijn gebruikt met wat speling. Smering ontbreekt maar zijn nog in goede staat. Geleidestrips zijn goed. Voerlatten zijn nagenoeg allemaal versleten. Start/stop met frequentieregelaar. Zijwanden zijn goed op het hellende deel en in de put. Draadrolplatform: niet inbegrepen.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, dolžina bale: 1.200 mm, širina bale: 750 mm, višina bale: 1.100 mm, teža bale: 550 kg, Oprema: dokumentacija / priročnik, Automatic baler HSM VK 4812 The machine is in perfect condition. It has only 1,950 operating hours and has processed just 1,314 bales of material. The baler has been regularly serviced and has operated indoors since new. It has worked with very low-contaminant material—mainly textile offcuts. Key advantages of the machine: - Actual throughput: 6–13 t/h - Optimal continuous operation: 6–10 t/h - Very fast cycle → ideal for integration with conveyor lines - Significantly better performance than the 15–22 kW version with high material flow Technical data: Pressing force: 480 kN (approx. 48 tons) Iijdpfxezb H E Us Abxoc Motor power: 30 kW Connection load: approx. 32 kW Power supply: 3 × 400 V / 50 Hz Specific pressure: 58.2 N/cm² Volume throughput: up to 332 m³/h Weight throughput (practical): approx. 6 t/h (20 kg/m³) approx. 13 t/h (50 kg/m³) Theoretical max. throughput: up to 16.6 t/h at 50 kg/m³ Idle cycle time: approx. 11.2 s Bale dimensions: 1100 × 750 × 600–1200 mm Bale weight: up to approx. 550 kg Press channel: 1100 × 750 mm Feed opening: approx. 1020 × 1250 mm We also have other balers in stock. Transportation costs depend on weight, volume and, most importantly, distance. For inquiries, please provide the following information: delivery address (postal code and city). Further details require a phone call, so please inquire by phone about transportation costs and alternative delivery methods. Our contact details can be found in the seller’s legal information. We sell and export worldwide. Thanks to our large warehouse capacity, we can also supply larger quantities flexibly and quickly. We issue intra-Community invoices – VAT-exempt. Opening hours: Mon-Fri: 8:00–16:00 Sat: closed

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 450 kg, Oprema: dokumentacija / priročnik, HSM VK 4812 P Year of manufacture: 2017 Fully automatic baler. The machine has undergone service and maintenance performed by an authorized HSM Service Center with a location in Germany. Baling operation after extensive servicing – further details available upon direct contact. The baler is supplied complete with a ramp for ejecting finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage/Frequency: 400V/50Hz Throughput at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 – 1200 mm Total length x width x height: 6661 x 3994 x 2583 mm Machine weight: 10.2 t Pressed materials: film, mixed paper, cardboard, punching waste Bale tying: 4-fold with wire We also have other balers in stock. Iodpfsy Udzhox Abxsic Transport costs depend on weight, volume, and especially distance. For inquiries, the following information is essential: delivery address (postal code and locality). For further details, telephone contact is required; therefore, please call us to inquire about shipping costs and other delivery options. Our contact details can be found in the seller’s legal notice. We sell and export worldwide, and due to our large warehouse capacity, we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices – without VAT. Opening hours Mon-Fri: 8:00 a.m. – 4:00 p.m. Sat: closed

Stanje: delavnici obnovljeno (rabljeno), dolžina bale: 1.200 mm, širina bale: 700 mm, višina bale: 800 mm, teža bale: 380 kg, Stiskalnica v idealnem stanju, po obnovi ni bila uporabljena. Servisirana izključno pri proizvajalcu. Idealno stanje. Popolnoma samodejno delovanje. Nastavljiva dolžina bale 600-1200 mm. Motor 15 kW. Leto 2007. Teža bale približno 380 kg. Iisdpfx Abox S Sbdsxoc

Stanje: pripravljen za uporabo (rabljen), Baler HSM VK 42/1200 fully automatic Pressing force: 42 tons Iedora Nrxepfx Abxjic Bale dimensions: 700 x 800 x 600 – 1200 mm Bale weight: approx. 450 kg Press length: approx. 7 meters Press weight: approx. 6,000 kg Tying: 4x automatic wire tying

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 20.580 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 450 kg, vhodni tok: 59 A, skupna masa: 12.000 kg, transportna višina: 2.750 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), transportna širina: 2.300 mm, transportna dolžina: 8.500 mm, kapaciteta rezervoarja: 300 l, Good day, We are pleased to offer you, without obligation, a used baler manufactured by HSM, model VK 4812. Iedpfxjt H Rcas Abxsic The following technical data has been taken from the manufacturer's operating manual and brochures, for which we do not assume any responsibility for accuracy or completeness. Manufacturer: HSM Model: VK 4812 Year of manufacture: 2011 Operating hours: 20,580 hours Main press force: 48 t Drive power: 30 kW Machine weight (press): 12 t The machine documentation is available in German. An inspection can be arranged by appointment at our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, teža bale: 350 kg, Oprema: dokumentacija / priročnik, HSM HL 4010 Re / Li horizontalna balirna preša. Opremljena s prekucnikom za košaro. Letnik proizvodnje: 2015. Zelo dobro ohranjena – redno vzdrževana v pooblaščenem servisnem centru. Pripravljena za uporabo. Možna vezava z žico, vrvico ali polipropilenskim trakom. Polavtomatski balirni prešni sistem s 40-tonskim pritiskom za učinkovito zmanjšanje prostornine ostankov (reciklažnih materialov) v industriji in trgovini: Iiedpfx Ajzd R Tajbxsc Karton Tetrapak Folije Pene PET plastenke Izolacijske podloge in drugi stisljivi materiali. Tlačna sila: 400 kN Transportna širina: 1,767 m Transportna višina: 2,489 m Transportna dolžina: 5,573 m Teža: 4.500 kg Moč pogona: 7,5 kW Teža bala (odvisno od materiala): 300–350 kg Dimenzije bale d x š x v: 750 x 1200 x 750

Stanje: dober (rabljeno), HSM ProfiPack P425 stroj za mletje kartona Ta stroj izdeluje polnilni material iz kartonskih odpadkov. Izdelano v Nemčiji. Stroj je v kot-novem stanju in je pripravljen za uporabo v proizvodnji. Opis: Ta visoko zmogljiv stroj za polnilni material predela več plasti kartona v blažilne preproge ali polnilni material, glede na vaše potrebe. Karton se hkrati narezuje in profilira, pri čemer nastane prilagodljiva preproga želene širine. Stroj je opremljen s kolesi za enostavno premikanje. Ijdpfxozdawie Abxjic Prednosti: – Kaljena rezalna valja iz masivnega jekla – Močan in učinkovit pogon, primeren za neprekinjeno obratovanje – Nastavljiva hitrost pomika materiala – Nastavljiva količina izhodnega materiala – Brezstopenjsko nastavljanje delovne širine s skalo, ki omogoča rezanje polnilnega materiala na katerokoli dimenzijo – Intuitivno upravljanje preko vzdržljive nadzorne plošče z LED opozorili – Integrirana turbo funkcija preprečuje zamašitve – Varno delovanje s pomočjo varnostnega stikala – Opremljen s kolesi z zavorami – Močan pogon, ki omogoča rezanje 2-3 kartonskih plasti – Teža: 175 kg – Dimenzije (V x D x Š): 1040 x 570 x 770 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Horizontalna balirna stiskalnica HSM HL 7009 Re/Li. Stroj je v zelo dobrem stanju in ga redno vzdržuje pooblaščen servisni center. Ta balirna stiskalnica je zasnovana za večje projekte odstranjevanja odpadkov v maloprodaji ter v manjših in srednje velikih centralnih skladiščih. Stiski modela HL 7009 imajo prečni prerez 1100 x 1100 mm in lahko pri dolžini baleta 1200 mm tehtajo do 600 kg. To zagotavlja optimalno izkoriščenost nosilnosti tovornjaka. Pritisna sila: 700 kN Specifična pritisna sila: 58 N/cm² Pogonska moč: 10,5 kW Napetost / frekvenca: 400 V / 50 Hz Nazivna prostorninska zmogljivost (teoretično): 42,97 m³/h Odprtina za polnjenje – širina x dolžina: 890 x 1020 mm Dimenzije baleta – širina x višina x dolžina: 1100 x 1100 x 1200 mm Skupne dimenzije – dolžina x širina x višina: 5366 x 2525 x 2559 mm Teža baleta: 600 kg Iisdpjzck Uiofx Abxjc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Used vertical baler HSM V-Press 1160 Plus, manufactured in 2015. The machine is regularly serviced by an authorized service center. The baler is fully operational and in very good technical condition. Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 1100 x 1200 mm Machine dimensions (W x D x H): 1780 x 1568 x 2985 mm Machine weight: 2403 kg Bale material: film, mixed paper, cardboard, cutting waste Freight costs depend on weight, volume, and especially the distance. For inquiries, the following information is relevant: delivery address (postal code and town name). Further details require a phone call, so please contact us by phone to discuss transport costs and delivery modalities. Our contact details are found in the legal information of the seller. Payment in cash upon collection on site is possible. We sell and export worldwide. Thanks to our large storage capacity, we can also supply larger quantities flexibly and quickly. Please contact us before purchase. We issue intra-community invoices (VAT excluded). Iodpszck Tljfx Abxsic Business hours: Mon-Fri: 8:00 – 16:00 Sat: closed

Stanje: zelo dobro (rabljeno), Baling Press HSM HL 4809 - Large filling opening, ideal for bulky boxes - Container tipper for convenient loading Pressing force in kN: 480 - Motor power in kW: 10.7 - Voltage/Frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Machine dimensions length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4-fold with wire Year of manufacture: 2015-2017 Baler complete, side covers removed for transport Iisdpfxsv Ak Npj Abxec Balers inspected by authorized service

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, Oprema: dokumentacija / priročnik, Used vertical baler HSM V-Press 1160 Plus, manufactured in 2015. The machine is regularly serviced by an authorized service center. The baler is fully operational and in very good technical condition. Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 1100 x 1200 mm Machine dimensions (W x D x H): 1780 x 1568 x 2985 mm Machine weight: 2403 kg Bale material: film, mixed paper, cardboard, cutting waste Freight costs depend on weight, volume, and especially the distance. For inquiries, the following information is relevant: delivery address (postal code and town name). Further details require a phone call, so please contact us by phone to discuss transport costs and delivery modalities. Our contact details are found in the legal information of the seller. Payment in cash upon collection on site is possible. We sell and export worldwide. Thanks to our large storage capacity, we can also supply larger quantities flexibly and quickly. Iodpfx Abjzbrxgexsic Please contact us before purchase. We issue intra-community invoices (VAT excluded). Business hours: Mon-Fri: 8:00 – 16:00 Sat: closed

Stanje: pripravljen za uporabo (rabljen), Pritisk: 185 kN, mere odprtine za polnjenje: 1195x541 mm, največja teža bale odvisno od materiala: 200 kg, največje dimenzije bale: 1200x780x700 mm, zmogljivost: 2-5 bal/h, čas cikla v prostem teku: 35 s, vezava: 4-krat s poliestrskim trakom, zmogljivost stiskanja v prostem teku: 68 m³/h, dimenzije stiskalnega zaboja: 1200x780x1300 mm, napetost: 3x 400V, moč motorja: 3 kW, dolžina: 1700 mm, širina: 1046 mm, višina: 2370 mm, teža: 994 kg. Ogled na lokaciji možen. Ijdpezcfkfsfx Abxsic

Stanje: dober (rabljeno), Leto izdelave: 1999, Balinirke, HSM, stiskalna moč 30 t – rabljeno - : Cena na lokaciji: samo 2.950 € (neto) Proizvajalec: HSM Tip: 225.1 VL Leto izdelave: 1999 Številka stroja: 6124.834. N Serijska številka: 200014505 Stiskalna moč: 30 t Ijdpezbygfofx Abxeic 400V, 5,5kW Stanje: dobro Na voljo: od Q4/2026 Lokacija: Hamburg

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Powerline FA 500.3, HSM Powerline 500.3 The flagship model of the HSM Powerline high-performance shredders. This powerhouse is perfectly suited for destroying large volumes in archives or central shredding facilities. The high-quality materials and the proven high manufacturing standard 'Made in Germany' by HSM ensure that the product is safe and durable. Specification Area of application: Archives / Central facilities Cut type: Particle cut Cut width: 3.9 mm Particle length: 40 mm Security level (DIN 66399): E-3|F-1|O-3|P-4|T-4 Shredding capacity (80 g/m² sheets): 180–200 Cutting speed: 210 mm/s Paper throughput: 340 kg/h Drive power: 7.5 kW Voltage / frequency: 400 V / 50 Hz Feed width: 500 mm Collection volume: 530 l Noise level (idle): approx. 65 dB(A) Weight: 905 kg Colour: Anthracite, iron grey, light grey Shreddable materials: Paper, staples and paper clips, credit cards, CDs/DVDs, USB sticks, crumpled paper, floppy disks, computer files. Ijdpfjy Anvrex Abxsic

Stanje: pripravljen za uporabo (rabljen), HSM 155 VL Baler Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 200 – 250 kg (cardboard) Technical specifications: L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressing force: 16 tons Power supply: 400 V (three-phase) Motor power: 4 kW Ijdpfx Abera Nrmoxsic Bale ejector HSM 155.1 VL Baler Pressing force: 18 tons Price for HSM 155.1 VL baler – 2,600 EUR HSM 155.2 VL Baler Pressing force: 16 tons Price for HSM 155.2 VL baler – 2,800 EUR

Stanje: pripravljen za uporabo (rabljen), Sila stiskanja: cca 700 kN (cca 70 ton) Moč motorja: cca 11 kW Napajanje: 3 × 400 V / 50 Hz Teža posamezne bale: do cca 600 kg Dimenzije bale: cca 1100 × 1100 × 1200 mm Dimenzije stroja: cca 5,9 m dolžina, 2,5 m širina, cca 2,6 m višina Iijdpfx Aera Dddsbxsc Teža stroja: cca 7 ton Cikel: cca 45–47 s Konstrukcijske značilnosti: - velik polnilni odprtina za karton - možnost avtomatskega nalaganja (npr. s transportnim trakom) - ročno vezanje z žico (4 žice) - hidravlična blokada palete in vrat za odstranitev bale Prednosti te preše: - velike bale = manj prevozov - visoka sila stiskanja - prilagojena za neprekinjeno delo Na voljo letniki: 2018–2020

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Znamka: HSM Tip: V-Press 1160 plus Leto izdelave: 2009 Pritisna sila: 532 kN Napetost: 400 V Maks. teža bale: do 550 kg (odvisno od materiala) Dimenzije bale: 120 x 110 x 120 cm Teža stroja: 2403 kg Dimenzije stroja: 180 x 157 x 298,5 cm Iiodpfx Aezdpctjbxec Dimenzije polnilne odprtine: 119,5 cm × 65 cm Stanje: zelo dobro! Video delujočega stroja na voljo na zahtevo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 12 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 630207349, HSM V-Press 825 Plus Pro – skoraj nerabljena, stisnjenih le 16 bal Na prodaj je balirni stroj HSM V-Press 825 Plus Pro v izjemno malo rabljeni kondiciji. Isdpfx Aoyy Ddasbxsic Stroj je skupaj izdelal le 16 bal, zato je praktično kot nov. Idealno za podjetja, ki iščejo visokokakovosten balirni stroj brez plačevanja cene nove naprave.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Znamka: HSM Tip: 155 VL Leto izdelave: 1994 Iiedpfxjzc Hhxo Abxoc Tlačna moč: 157 kN Napetost: 400 V Največja teža bale: 250 kg Dimenzije bale: 110 × 70 × 95 cm Teža stroja: 950 kg Dimenzije stroja: 144 x 100 x 234 cm Dimenzija polnilne odprtine: 110 × 59 cm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 119 h, Funkcionalnost: popolnoma funkcionalen, Presse verticale à balles HSM V-Press 860 plus B, Année 2019 Données techniques : Fabricant : HSM Modèle : V-Press 860 plus B Année : 2019 Heures de fonctionnement : 119 Force de compression : 60 t Puissance motrice : 4 kW Ouverture de chargement : 1500 x 651 mm Hauteur de chargement : 1129 mm Dimensions de la balle : env. 1500 x 1200 x 780 mm Poids de la balle : 550 kg Liaison : manuelle Temps de cycle théorique à vide : 25 s Rendement théorique : 32,5 m³/h Dimensions : 2099 x 1245 x 2985 mm (L x P x H) Poids : 2340 kg Matériaux : Film, papier, cartons Remarque : La presse est en très bon état. Veuillez noter : Toutes les données techniques sont basées sur les indications du fabricant. Nous n'assumons aucune responsabilité quant à l'exactitude des informations ou de possibles erreurs. Iedpfxjy I Rnue Abxeic Offres sous réserve, sous réserve de vente préalable et révocables à tout moment. Les visites sont possibles sur rendez-vous. Vente sur site, sans garantie ni responsabilité. Nos conditions de paiement : 100% paiement d'avance.

Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 245 h, Funkcionalnost: popolnoma funkcionalen, Vertical baler HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2021 Operating hours: 245 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Iedpoy Tvzdjfx Abxoic Bale weight: 480 kg Tying: manual Theoretical cycle time (idle): 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Foil, paper, cardboard Note: The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the information provided or for possible errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Viewings can be arranged by appointment. The sale is ex location, without warranty or guarantee. Our terms of payment are 100% advance payment.