Holzkraft T 45C Ll nakup rabljenega (76.768)

Stanje: novo, Table spindle moulder HOLZKRAFT t 45c LL With table extension on both right and left sides, as well as extendable workpiece support ----- Technical data ----- Table size: 1,945 x 695 mm, Max. spindle projection above table: 130 mm, Usable spindle length: 100 mm, Max. retractable cutter diameter: 180 mm, Chodpfxsu U Rfpo Agtja Speeds: 3,500 / 7,000 / 10,000 rpm, Motor 400 V: 6.6 HP / 5.0 kW, Extraction port diameter: 2 x 120 mm - Special price - - New display machine -

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm Chedpfx Agehp Rcrotoa SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax ti 55es LL - Spindle Moulder Image shows T 55 i elite s standard version The professional joiner's machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting Stable steel/cast iron construction Large-dimension spindle unit made from cast iron, tiltable up to -45° to the rear Spindle speeds displayed via LEDs Quick and easy speed change thanks to eccentric clamp Reversible spindle rotation (clockwise/counter-clockwise) Height and tilt indication accurate to 0.1 mm Heavy-duty professional fence: fine adjustment via rack-and-pinion, digital readout, aluminum fence jaws, 3-position settings for fast repeatability Chjdpfodqzh Rsx Agtoa Scope of delivery: Aluminum fence jaws Curved guard Table extension left and right Model: minimax ti 55es LL Article No.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table size: Useful spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilt: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V/50 Hz/S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax tw 45c Chsdpjhp Rcyofx Agtea With aluminium sliding table and tilting spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Weight (net) approx. 290 kg Dust Extraction Connection Extraction port diameter 2 x 120 mm Work Table Work table length 1000 mm Sliding table length 1000 mm Work table width 435 mm Sliding table width 270 mm Table height 900 mm Installation Information Required length 1945 mm Machine body width/depth 710 mm Required width/depth 2220 mm Working area length 1600 mm Explanation required space The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm Working area explanation Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Electrical Data Mains voltage 400 V Main drive motor power 5.0 kW Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 to -45° Spindle speeds 3500/7000/10000 min⁻¹ Usable spindle length 100 mm Spindle shaft diameter 30 mm Maximum spindle projection above table 130 mm Maximum Cutter Diameter Max. retractable cutter diameter 180 mm Max. cutter diameter for tenoning 275 mm Max. cutter diameter for profile milling 210 mm SCOPE OF DELIVERY Curved workpiece safety hood Anodised aluminium sliding table Telescopic mitre fence Aluminium fence jaws

Stanje: novo, - NEW - Description - Robust steel grey cast iron construction - Milling spindle tiltable backwards from 0° to -45° - Three spindle speeds from 3,500 – 10,000 rpm - Standard with reversing (left/right rotation) for milling spindle - Large dimensioned milling unit made of cast iron, mounted directly to the table - Solid and precise cast iron table - Fast and trouble-free speed change - Powerful 5.0 kW industrial motor - Arc milling safety hood included as standard Equipment Details Aluminum sliding table - Equipped with a field-proven ball contact system - Torsion-resistant, high-precision, easy to operate, and Chjdpfx Aevwf Ucsgtsa trouble-free for daily use - 10-year Holzkraft guarantee on wear of guideways Cast iron milling unit - Mounted directly onto the milling table - Spindle bearings positioned high with precision ball bearings, resulting in minimal bearing load and maximum service life - 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors - Equipped with a powerful three-phase motor Milling guard - The milling guard is equipped as standard for maximum safety with height-adjustable guide rail and protective shield Milling fence - Precise milling fence with quick adjustment and fine-tuning feature, including scale on the fence jaw - Integrated extraction port ensures clear visibility Milling table opening - Large milling table opening allows use of large panel raising cutters and tenoning and slotting tools above and below the table Arc milling safety hood - Included as standard Reversible fence jaws - Versatile, integrated fence to bridge the tool gap - Enables safe work even with narrow workpieces Technical Data: Dimensions and Weights Net weight approx. 290 kg Extraction Connection Extraction port diameter 2 x 120 mm Work Table Work table length 1,000 mm Sliding table length 1,000 mm Work table width 435 mm Sliding table width 270 mm Table height 900 mm Installation Information Space requirements length 1,945 mm Machine body width/depth 710 mm Space requirements width/depth 2,220 mm Working area length 1,600 mm Explanation of Space Requirements Dimensions take into account maximum travels or usable lengths. Working Area width/depth 1,600 mm Machine body length 1,000 mm Explanation of Working Area Please add the stated measurements to the space requirements to determine the recommended free installation area for the machine. Electrical Data Connection voltage 400 V Mains frequency 50 Hz Phase(s) 3Ph Drive motor power 5.0 kW Current type AC Milling Spindle Spindle tilt 0 to -45° Spindle speed(s) 3,500/7,000/10,000 rpm Usable spindle length 100 mm Spindle shaft diameter 30 mm Max. spindle projection above table 130 mm Max. Milling Tool Diameter Max. lowerable tool diameter 180 mm Max. tenoning tool diameter 275 mm Max. profile cutter diameter 210 mm Delivery Scope Arc milling safety hood Anodised aluminum sliding table Telescopic mitre fence Aluminum fence jaws . 5502045

Stanje: novo, - Stable steel and cast iron construction - Dynamically balanced milling unit anchored to the worktable - Particularly robust design - Smooth operation due to precision assemblies and high own weight - Standard with forward/reverse rotation and electronic lockout during direction change - Five speeds from 3,000 to 10,000 rpm - Speed changes are simple and convenient from the machine side - Standard with MK 4 interchangeable spindle system - Large cast iron worktable for lasting precision - Easy operation via control elements and speed display on the machine front - Large-dimension milling fence with fine adjustment and standard aluminum fence jaws - Fence adjusted via handwheel - Numeric display of set spindle height, accurate to tenths of a millimeter - High-performance industrial motors This item comes with a 3-year Stürmer warranty upon online registration. Warranty applies only to end customers in Germany and Austria. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3 - PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Weight (net): approx. 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Port diameter: 80 mm - Number of fence extraction ports: 1 - Fence extraction port diameter: 120 mm Worktable: - Worktable length: 2500 mm - Worktable width: 810 mm - Table height: 923 mm Chodpfx Asu T Hhkogtja Setup Information: - Space requirements: The stated dimensions include maximum travel paths or usable lengths. - Working area length: 3700 mm - Working area width/depth: 5000 mm - Working area explanation: Please add the stated working area dimensions to the space requirements to determine the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, setting from the front via handwheel with digital numeric display - Curved milling guard - Manual spindle height adjustment - Manual spindle tilt adjustment - Manual height and tilt adjustment of milling unit - Position of controls: On machine body - Table design: Table extensions left and right and pull-out workpiece support (total width 2500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Motor output: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45 ° - Usable spindle length: 140 / 180 mm - Usable spindle length details: For spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Spindle stroke: 90 mm - Interchangeable spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. milling tool diameter: - Max. retractable tool diameter: 320 x 60 mm - Max. tool diameter for profile milling: 250 mm - Max. tool diameter for tenoning: 350 mm - Max. tool diameter for form milling: 160 mm

Stanje: rabljeno, Leto izdelave: 2023, Rabljen stroj Cjdpfx Agozk Ni Toteha Letnik izdelave: 2023 Stanje: skoraj novo, izvedeno le nekaj vrtanj Oprema in tehnični podatki: Število vrtljajev vretena: 3.000 vrt/min Širina vrtanja: 240 mm Maksimalna globina vrtanja pri 90°: 180 mm Nastavitev višine vrtalne glave: 160 mm Območje vpenjanja orodja: 0–20 mm Vrtenje delovne mize: ±60° Dolžina delovne mize: 565 mm Širina delovne mize: 315 mm Premer odvodnega priključka: 90 mm Oddajana moč: 2,2 kW Napetost priključka: 400 V Omrežna frekvenca: 50 Hz Dimenzije: 1.290 × 980 × 1.270 mm Teža: 260 kg Razpoložljivost: v kratkem roku Lokacija skladišča: Röllbach

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Dowel hole boring unit: pitch 16, 22, 25, 32 Drilling depth: 180 mm Slot length: 240 mm Height adjustment range: 160 mm Motor power: 2.2 kW Speed: 3000 rpm Extraction connection: 100 mm Machine length: 1280 mm Chjdpfx Aov N Tyqsgtja Machine width: 960 mm Weight: 260 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, številka stroja/vozila: DC-2075, Work table 700 x 300 mm, drilling width 240 mm, drilling depth 150 mm, maximum travel 230 mm, Csdovl Eynspfx Agteha drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, spindle speed 3,000 rpm, motor 2.2 kW, 400 Volt, 50 Hz, weight approx. 345 kg, location: Seevetal, without transport, as inspected, sale subject to prior sale.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: AB00017920, Funkcionalnost: popolnoma funkcionalen, moč: 7 kW (9,52 KM), vhodna napetost: 400 V, premer vretena: 30 mm, vrtilni razpon: 45 °, največja hitrost vrtenja: 10.000 obr/min, vrtljajska hitrost (min.): 3.000 obr/min, širina mize: 810 mm, dolžina mize: 2.500 mm, skupna masa: 510 kg, vrsta nastavitve višine: mehanski, dolžina vretena za rezkanje: 180 mm, pomik vretena: 90 mm, delovna višina: 923 mm, Oprema: motorna zavora, - Sturdy steel and grey cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high dead weight - Standard features include right/left rotation and electronic interlock when changing direction - Five speeds from 3000 to 10000 rpm - Speed change is simple and convenient from the machine side - Standard MK 4 interchangeable spindle system - Large grey cast iron worktable for lasting precision - Easy handling thanks to control elements and speed display on the front of the machine - Large-dimensioned milling fence with fine adjustment and aluminium fence jaws as standard - Fence adjustment via hand crank Cedpowwkqhofx Agtjha - Numeric display of set spindle height, accurate to one tenth of a millimeter - High-performance industrial motors

Stanje: novo, - New - Description: - Premium features for high productivity in a compact footprint! - Intuitive operation with the eye-S control system and large 10" touchscreen: HMI Maestro Active Edge. Features include graphical display of all machining units and their operating status, graphic simulation of machining processes, control of all machining units, glue pot temperature regulation, setup assistance as per the processing program, error diagnostics for rapid troubleshooting, machining parameter statistics, USB interface, network connectivity ready, and Industry 4.0 readiness with API REST data transfer protocol. - Outstanding accessibility to all working units thanks to the large hood, providing protection and noise reduction. - Monoblock steel construction ensures maximum machine stability and rigidity. - Automatic unit positioning when changing panel thickness. - Automatic feed of strip edges with edge magazine (me 35 t s): Solid wood strip edges are auto-loaded and synchronized with panel feed. - Panel feed via chain conveyor with rubber glide shoes. - Extendable workpiece support table. - Infeed fence adjustment by spacer plates. Technical Data: Dimensions and Weight Length: approx. 3314 mm Height: approx. 1300 mm Width/Depth: approx. 1085 mm Weight: approx. 545 kg Flush/Radial Milling Unit Motor power: 2 x 0.35 kW Spindle speed: 12,000 rpm Cutter diameter (carbide-tipped): 55.3 mm Extraction port diameter: 2 x 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Glue Unit Glue pot motor power: 0.25 kW Glue pot extraction port diameter: 60 mm Working temperature: 190°C Glue pot capacity: 0.8 kg Pneumatic Connection Operating pressure: 6.5 bar Air consumption: 470 l/min Feed Feed motor power: 0.55 kW Feed speed: 7 m/min Edges Edge thickness, rolls: 0.4 – 3.0 mm Edge thickness, strips: up to 5.0 mm Codpfx Aovwfmljgteha Pre-Milling Unit Motor power: 3 kW Diamond cutter diameter: 80 mm Material removal: 0.5 / 2 mm Spindle speed: 7200 rpm Cutter height: 56 mm Extraction port diameter: 2 x 80 mm Scraper Units Radius scraper: 2 mm Buffing Unit Motor power: 2 x 0.14 kW Speed: 2800 rpm Workpiece Workpiece thickness: 8 – 50 mm Minimum workpiece width: 110 mm Minimum workpiece length: 120 mm Item No. 5507235

Stanje: novo, - NEW - Description Equipped with TERSA cutterhead for lightning-fast planer knife changes The TERSA planer knife system ensures exceptionally quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed Extra-long one-piece surfacing tables enable effortless processing of workpieces Large surfacing fence remains in position when opening the surfacing tables Surfacing tables open to the rear The substantial machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction. Tables made of annealed and stress-relieved cast iron, making them resistant and permanently flat Table lips for quiet operation Equipment details: TERSA cutterhead No adjusting or screwing required Planer knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Extraction hose connection The extraction ports for surfacing and thicknessing face the same direction. The hose connection is made from only one side. No hose needs to be looped around the machine. Drive Sturdy chain drive Drive wheels made of steel Solid cast iron bearing block Planing unit Heavy-duty kickback protections prevent workpiece kickback TERSA cutterhead with three knives ensures optimal planing surface Material feed Helically toothed steel infeed rollers for continuous and even material feed without marking Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Technical data: Dimensions and weights Length (product) approx. 2015 mm Weight (net) approx. 330 kg Width/depth (product) approx. 990 mm Drive power Drive motor power 5 kW Surfacer Total table length 1800 mm Max. cutting depth, surfacer 4 mm Working height 900 mm Chsdpfxovwga Hs Agtsa Extraction connection Extraction port diameter, thicknesser 2 x 120 mm Setup information Required installation length 2015 mm Machine body width/depth 596 mm Required width/depth 1460 mm Working area length 1000 mm Notes on required space Dimensions include maximum travel or effective lengths. Working area width/depth 3500 mm Machine body length 659 mm Notes on working area Add the listed measurements to the required space to obtain the recommended free space for the machine. Thicknesser Thicknessing table length 605 mm Max. working height, thicknesser 230 mm Thicknessing table width 420 mm Max. cutting depth, thicknesser 4 mm Min. working height, thicknesser 3 mm Electrical data Connection voltage 400 V Current type AC Phases 3 Ph Network frequency 50 Hz Planer cutterhead Cutterhead type TERSA Cutterhead speed 5200 min¯¹ Cutterhead diameter 72 mm Max. planing width 410 mm Number of knives 3 pcs Feed Feed speed 7 m/min Included in delivery TERSA cutterhead Anodised aluminium surfacing fence No. 550 3414

Stanje: rabljeno, prevoženi kilometri: 108.300 km, moč: 220 kW (299,12 KM), prva registracija: 11/2020, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2020, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, * Special equipment: * TK refrigerated box body by Kiesling, year 2020 * Rear portal doors * Cold curtain * Aluminum floor * Load securing rails, two each on right and left * Load securing crossbars * Thermoking T 600R electric/diesel refrigeration unit with generator * Night power socket including cable for refrigeration unit * BÄR 1.5 t tuck-under tail lift * Leather steering wheel * Turn assist system * Lane keeping assist * Stability control assist * Attention assist * Active Brake Assist 5 * Predictive Powertrain Control (PPC) * Navigation system * Automatic climate control * Bi-Xenon headlights * Low engine tunnel storage compartment * Overhead storage above windscreen with lid * Comfort package * Visibility package * 220 Ah battery * CB radio * Interactive multimedia cockpit * Air horns (2) on cab roof * Electrical pre-installation in cab 24V / 100A * Driving assistance system: turn assist * 12-speed gearbox – type G 211-12 * Manual lifting roof (steel) * Heated fuel filter * Fuel tank: 390 l aluminum, left side * Reinforced engine brake * Reinforced engine compartment encapsulation * Wheelbase variant 5,500 mm * Rear overhang 2,400 mm * Smoker package * Acoustic reversing warning (external warning signal) * Tail lift switch * Additional remote control key * Fleet management system interface * Circuit breaker * External sun visor * 12V / 15A socket in passenger footwell * 24V socket in passenger footwell * Pre-wiring for 4 surround cameras (display in control monitor) * Preparation for additional spotlights * Preparation for cool box/refrigerator * Auxiliary heater (water) Csdpfx Asxafgysgteha * Further equipment: * Emission standard EURO 6 d * Front axle 8.0 t * Actros 5 * Heated front mirrors * 2-line trailer brake system * Left side connections * 24V / 15-pin trailer socket * Exhaust pipe routed to center of vehicle * Side-by-side batteries, rear axle differential lock * Compressed air connection in cab * Compressed air unit with condensate monitoring * Automatic headlight activation (light sensor) * Driver assistance system: Attention Assist (drowsiness detection sensor) * Driver assistance system: Autonomous Emergency Brake Assist (Active Brake Assist 5) * Driver assistance system: lane keep assist * ClassicSpace, 2.30 m, tunnel 320 mm * LED outline marker lights * Suspension: full air/air suspension * Electric window lifts * Tinted windscreen * Urea (AdBlue) tank: 60 l * Central locking system * Forward-facing air intake * 2-stage air compressor * Heated air dryer * Engine 7.7 l – 220 kW R6 diesel (OM 936) * Docking mirror * Disc brakes, front and rear axle * Remote control key * Flashing LED side marker lights * Cab seats: passenger function seat * Front splash guards * 12V socket in passenger footwell * Tachograph / EU control device * Truck Data Center 7 (fleet management system) front * Pre-installation for toll recorder * Pre-wiring Truck Data Center (fleet management system) * Drop forged front axle * Gross weight 18.00 t * Tires 315/60R22.5 * And much more. * Errors, changes, and prior sale excepted.

Stanje: rabljeno, številka stroja/vozila: YV2T0X1A4FZ103767, prevoženi kilometri: 704.656 km, moč: 188 kW (255,61 KM), prva registracija: 09/2015, vrsta goriva: dizel, velikost pnevmatike: 285/70 R19.5, konfiguracija osi: 4x2, medosna razdalja: 5.600 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 300 l, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, število sedežev: 2, skupna dolžina: 9.300 mm, skupna širina: 2.550 mm, dovoljena osna obremenitev (os 1): 5.000 kg, dovoljena osna obremenitev (os 2): 8.480 kg, dolžina tovornega prostora: 7.400 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 2.550 mm, Leto izdelave: 2015, Oprema: centralno zaklepanje, dvižna zadnja plošča, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, spojler, tempomat, = Dodatne možnosti in oprema = - Strešni spojler - Voznikov komfortni sedež 5 - Zadnja dvižna vrata - Ogrevana zunanja ogledala - Stranska vrata - Sončna zaslonka - Priprava za OBU (cestninska enota) - Centralno zaklepanje z daljinskim upravljanjem = Opombe = Zadnja dvižna vrata Dolžina platforme: 255 cm Nadgradnja Letnik: 2015 Material: vezana plošča = Dodatne informacije = Tehnične informacije Število valjev: 6 Prostornina motorja: 7.698 ccm Pogonski sklop Tip motorja: Volvo I SYNC Konfiguracija osi Dimenzije pnevmatik: 285/70 R19.5 Vzmetenje: zračno vzmetenje Prednja os: Maks. osna obremenitev: 5.000 kg; profil pnevmatike levo: 80 %; profil pnevmatike desno: 80 % Zadnja os: dvojna montaža; Maks. osna obremenitev: 8.480 kg; profil pnevmatike levo znotraj: 80 %; levo zunaj: 80 %; desno znotraj: 80 %; desno zunaj: 80 % Codoytgidepfx Agtjha Teže Lastna masa: 8.537 kg Nosilnost: 3.553 kg Dovoljena skupna masa: 11.990 kg Funkcionalno Dvižna nakladalna ploščad: HOLLANDIA DHLM, zadnja dvižna vrata, 2.500 kg Identifikacija Registrska številka: 62-BLB-4

Stanje: rabljeno, Leto izdelave: 2018, Nosilnost 350 kg, minimalna višina mize 757 mm, maksimalna višina mize 1157 mm, dolžina mize 3000 mm, širina mize 1000 mm. Dolžina ca. 3010 mm, širina/globina ca. 1040 mm, višina ca. 1157 mm. Priporočena zmogljivost odsesavanja 2200 m³/h, število priključnih nastavkov 3 x 220 V, premer priključnih nastavkov 140 mm. Teža: 130 kg. Skladišče: Nattheim. Chsdpfx Agsxnlavstoa

Stanje: novo, Leto izdelave: 2025, Gluing unit: Yes Chedpfxek Eai Uj Agtsa Edge thickness: up to 3 mm Workpiece thickness: from 8 mm to 50 mm Minimum workpiece width: 110 mm Glue pot: Granulate, quick-change pot End trimming unit: Yes End trimming / flush cutting: Yes Milling station: Chamfer / Radius Corner copying: Yes Flat scraper: Yes Radius scraper: Yes Buffing unit: Yes Anti-adhesive spray unit: Yes Infeed fence adjustment: Manual Workpiece thickness adjustment: Manual Power consumption: 5 kW Machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Dowel hole drilling unit: spacing 16, 22, 25, 32 mm Drilling depth: 150 mm Slot length: 250 mm Vertical adjustment travel: 145 mm Motor power: 1.5 kW Speed: 3,000 rpm Extraction connection: 100 mm Machine length: 1,280 mm Machine width: 960 mm Cedpjgzlq Eefx Agtoha Weight: 160 kg

Stanje: rabljeno, prva registracija: 11/2018, Oprema: ABS, Delovne ure: 2.586 ur, dizel; 589 ur, omrežje. Carinski zaporni sistem z odobritvijo in potrditvijo. Zaščita pred podvozjem, pritrjena v skladu z direktivo 70/221/EGS. Barva: bela. Nadgradnja FERROPLAST v ojačani izvedbi, primerna za intenzivno delovanje hladilnega sistema. Vse tri osi imajo funkcijo dviga in pomoč pri zagonu (?3x zavore?). Posebna izvedba nosilca za podporno vetrobransko konzolo za 3-osne vlečne enote. Paletni zabojnik za 36 euro/ISO palet. Dinamična zaščita rampe (DRP). Dodaten par blatnikov med osmi (plastika). Paket storitev TrailerConnect – „Temperatura“ (12 mesecev vključeno). Osvetlitvena naprava z 2 kombiniranima LED lučema + varnostne luči SL2. 4 temperaturni senzorji za beleženje temperature. Desni priključek za rezervoar + rezervoar za gorivo, primeren za biodizel. Indikator nivoja -40 °C do +40 °C, natančnost razred 2 v skladu z DIN 16203. Zadnja podlaga s 1.000 mm ustavljalnikom. Hladilna enota: Carrier 1950 MT. Chedpfxozr A Rte Agtea

Leto izdelave: 2022, stanje: rabljeno, Used equipment Year of manufacture: 2022 Features and technical data: - Enables a single person to effortlessly load panels onto the platform frame and swivel them from the vertical to the horizontal position - Designed for use with panel saws, dividing saws, storage racks, or during transfer between workstations - Swivel frame with two-position locking (vertical and horizontal) - Table height adjustment to the desired working level via foot-operated hydraulic system - Easy-running scissor lift mechanism ensures the platform is always raised and lowered completely parallel - Robust support rollers on the lower side and multiple omnidirectional rollers for ergonomic maneuverability Cedpfx Aszk Nqdjgtsha - Counterweight integrated in the lower frame for maximum stability and safe positioning when moving the table - Operator pedal remains easily accessible at all times - Simple maneuverability via four swivel castors (diameter 125 mm) - Two castors are equipped with brakes - Swivel frame can be mounted and removed from the platform base with just a few motions - Meets the safety specifications of EN 1570-1 - Load capacity: 300 kg - Max. table height: 1010 mm - Min. table height: 400 mm - Swivel frame width: 1800 mm, length: 1500 mm - Roller diameter: 125 mm - Dimensions: 1200 x 740 x 400 mm - Weight: approx. 80 kg - Swivel frame weight: 10 kg Availability: short notice Location: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 2023, Rabljen stroj Chsdpfxezk Nn Ao Agtea Letnik proizvodnje: 2023 Stanje: kot nov, stroj ni bil uporabljen Oprema in tehnični podatki: - Število vrtljajev vretena: 3.500 / 6.000 / 8.000 / 10.000 vrt/min - Nagib vretena: 0 do -45° - Uporabna dolžina vretena: 125 mm - Premer vretena: 30 mm - Kazalnik vrtljajev: LED-prikaz na sprednji strani stroja - Največji premer orodja (standard): 240 mm - Največji premer orodja, ki ga je mogoče spustiti: 230 mm - Največji premer orodja za profilno frezanja: 240 mm - Največji premer orodja za čelnično frezanja: 320 mm - Dolžina delovne mize: 1.200 mm - Širina delovne mize: 530 mm - Višina mize: 900 mm - Dolžina drsnega nosilca: 1.200 mm - Širina drsnega nosilca: 360 mm - Višina drsnega nosilca: 142 mm - Premer odvodne cevi: 2 × 120 mm - Moč pogonskega motorja: 5,0 kW - Napetost: 400 V - Frekvenca omrežja: 50 Hz Mere: 1.200 × 2.000 mm Teža: 510 kg Razpoložljivost: kratkoročno Lokacija skladišča: 63934 Röllbach

Stanje: novo, Leto izdelave: 2025, Woodworking machinesSliding Table Spindle Moulder Minimax twf55 es Item number: 5502261 Robust steel and cast iron construction Anodised aluminium format sliding table Large-scale spindle unit made of cast iron, tiltable backwards up to -45° Four spindle speeds from 3500 to 10000 rpm Clockwise and counterclockwise rotation standard Height and tilt display precise to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-relieved and annealed for permanent precision Powerful 5.0 kW industrial motor Curved section hood included Made in Italy Dimensions and Weights Length (Product) approx. 1200 mm Width/Depth (Product) approx. 2000 mm Weight (Net) approx. 510 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1200 mm Table width: 530 mm Table height: 900 mm Sliding table length: 1200 mm Sliding table width: 360 mm Sliding table height: 142 mm Setup Information Required Space Length: 2800 mm Required Space Width/Depth: 2910 mm Space Requirement Note: Dimensions account for maximum travel paths or usable lengths. Machine body length: 1200 mm Machine body width/depth: 846 mm Working area length: 1600 mm Working area width/depth: 2300 mm Working area note: Please add the specified dimensions to the required space to determine the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Motor output: 5.0 kW Spindle Spindle tilting: 0 to -45° Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Spindle speed display: LED at machine front Spindle shaft diameter: 30 mm Max. Tool Diameter Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tool diameter for profile milling: 240 mm Max. tool diameter for tenoning: 320 mm EQUIPMENT Features Aluminium sliding table: ✔ Spindle fence: Heavy-duty professional design with hold-down, safety cover and aluminium spindle fence jaws Chodpfx Agsi Dphtjtsa Telescopic mitre fence: with two flip stops Extension table: ✔ Curved section safety hood: ✔ Eccentric clamp: ✔ Handle on sliding table: ✔ Manual spindle height adjustment Manual spindle tilt adjustment Control: Manual height and tilt adjustment of the spindle unit Control elements location: On machine body Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Holzkraft Combined Surface and Thickness Planer - Immediately available - Ideal for demanding craftsmen and joiners The extra-long, single-piece surfacing tables allow easy straightening of workpieces Working tables are made of cast iron for durability and long-term flatness Rearward, simultaneously opening surfacing tables with spring assist for fast and convenient changeover Thanks to the fixed-mounted extraction hood, there is no need to change the extraction hose during setup, saving valuable work time Helical steel infeed roller ensures constant and even wood feed Rubber outfeed roller in the thicknessing outfeed for consistent wood extraction Material feed with four selectable speeds Height adjustment of the thicknessing table via handwheel with integrated height scale DIGITAL version: with electric thickness table height adjustment and digital readout On/off switch within operator's reach Powerful industrial motor High machine weight provides maximum precision and smooth operation Preparing for slot mortising unit Quality Made in Italy Dimensions and Weights Length approx. 2,250 mm Width/depth approx. 1,370 mm Weight approx. 695 kg Surfacing Total table length 2,250 mm Max. cutting depth 5 mm Fence length 1,200 mm Fence height 150 mm Chedpfx Agoih Dxdotsa Dust extraction connection Thicknesser extraction port diameter 1 x 120 mm Drive performance Main motor 7 kW Setup Information Space requirement length 2,250 mm Space requirement width/depth 1,440 mm Notes on space requirement: dimensions account for max travel or working lengths. Thicknessing Thicknessing table length 850 mm Thicknessing table width 520 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Max. cutting depth 5 mm Electrical data Supply voltage 400 V Phases 3-phase Current type AC Mains frequency 50 Hz Cutterblock Type TERSA Diameter 120 mm Number of knives 4 Speed 5,000 rpm Max. planing width 520 mm Feed Speed 5 / 8 / 12 / 18 m/min Location: From stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Surface planer and thicknesser with TERSA quick-change cutterhead system. Equipped with the TERSA quick-change system for rapid cutter knife replacement in seconds. The TERSA cutterhead system ensures exceptionally quiet operation. Helically-toothed steel infeed roller for consistent and even material feed. Robust planing tables made of ribbed, milled, and stress-relieved grey cast iron, ensuring resistance to deformation and long-term flatness. Large, tiltable planing fence for precise planing, reversible 90°/45°, with quick clamping mechanism. Planer table opens to the rear. Powerful motor. Solid steel/grey cast iron construction. Long-hole drilling unit retrofittable. Equipment details: TERSA cutterhead No adjustment or screwing required Knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Jointer: Standard with TERSA quick-change cutterhead system Large-scale planing tables The jointer and thicknesser tables made of grey cast iron guarantee maximum operational smoothness and vibration-free running. Thickness planer: With the powerful feed mechanism, workpieces up to 200 mm in height can be planed. The helically-toothed feed roller guarantees constant material feed. Conversion from jointer to thickness planer is completed in seconds with a single action. Chsdpfx Ajdqy Uqegtsa Drive: Sturdy chain drive design Drive wheels made of steel Heavy-duty cast iron bearing support Planing system: Heavy-duty anti-kickback devices prevent workpiece kickback. Three-knife TERSA cutterhead ensures optimal planing results. Special features: Large planing fence, reversible 90°/45° for precise planing, with quick clamping mechanism Includes: Large, reversible 90°/45° planing fence for precise planing with quick clamping mechanism TERSA cutterhead Model: minimax fs 30g TERSA Article no.: 5503036 Technical data: --- Planer specifications --- Total table length: 1200 mm Infeed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. depth of cut: 3 mm --- Thicknesser specifications --- Thicknesser table dimensions: 450 x 300 mm Min./max. working height: 3/200 mm Feed speed: 6 m/min Cutterhead diameter/number of knives: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction port diameter: 2 x 120 mm Weight: 140 kg

Stanje: novo, Leto izdelave: 2025, FS 41 Classic Tersa – Surface and Thickness Planer with TERSA Quick-Change Cutterhead System Equipped with a TERSA cutterhead for tool-free, seconds-fast knife changes The TERSA blade system enables exceptionally quiet operation Helically serrated steel feed roller for consistent and even wood feed Extra-long one-piece surfacing tables ensure accurate and easy planing of workpieces Large tilting fence can remain in its set position when opening the surfacing tables Surfacing tables open towards the rear High machine weight guarantees maximum precision and smooth running Powerful industrial motor Durable steel and cast iron construction Model: FS 41 Classic Tersa Article no.: 5503414 Technical Specifications --- Surfacing Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. cutting depth: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./Max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter / knives: 72 mm / 3 pcs Cutterhead speed: 5200 rpm Chjdpfx Ajcnxayogtea Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa Cutterhead System No more adjustment or screwing Knife change in seconds Self-locking Exceptionally quiet operation Safety Features Heavy-duty anti-kickback devices prevent workpiece kickback 3-knife Tersa cutterhead for optimal planed finish Wood Feed System Helically serrated steel feed rollers ensure consistent and even material feed without markings 13 teeth engage simultaneously for powerful feed Maintenance-free, unlike rubber feed rollers Extraction Hose Connection Extraction ports for both surfacing (1) and thicknessing (2) are oriented in the same direction Hose connection accessible from one machine side only No hose routing required around the machine

Stanje: novo, Leto izdelave: 2026, Maximum specification for professional users. Multi-function combination machine with TERSA cutterblock, mitre cutting unit, and tilting spindle moulder. Ø 350 mm main saw blade with 118 mm maximum cutting height, even with scoring blade installed. Scoring unit with separate motor and Ø 120 mm saw blade, easily adjustable from outside. High-precision sliding table made of anodised aluminium on hardened and polished steel guide rails. Large outrigger table (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to 3300 mm. Saw aggregate tilts from 90° to -45°. Tilting spindle moulder from 90° to -45° towards the fence. Four spindle speeds. Spindle moulder with reversible rotation direction. Quick conversion to thicknesser thanks to parallely opening surface tables. 2-speed feed on thicknessing table. Helical-toothed steel infeed roller for consistent wood feed. Three independent industrial motors. Includes separate rip fence and separate jointer fence. Equipped with lockable main switch. Equipment details: Crosscut fence Immediate control Outrigger table Outrigger with angle-adjustable telescopic crosscut fence with degree scale. Sliding table with ball contact system Made of anodised aluminium Guides made of hardened and ground F550S steel, 15% harder than conventional steel Guides are riveted, not glued Smooth-running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guideways Cast iron dual trunnion saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to saw blade, supported on both sides Height and tilt adjustable up to 45° Scoring unit with separate 0.55 kW scoring motor as standard Dual trunnion spindle moulder unit Large dimensioned, tilting cast iron dual trunnion spindle moulder unit Spindle fence Heavy-duty professional version The high-quality spindle fence made of cast iron is supplied with fine adjustment as standard 3-position for quick recall of settings Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Planer section Helical-toothed steel infeed rollers ensure consistent wood feed Massive anti-kickback devices prevent workpiece kickback 4-knife Tersa cutterblock for optimal planing results Table lips ensure quieter operation Tersa planer cutterblock No more setting or screwing Knife change in seconds Self-locking Extremely quiet operation Chodpecnxa Ssfx Agtoa Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, guaranteeing maximum stability under all working conditions Special lifting device ensures table position is maintained precisely, even without locking Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Reversible aluminium fence ruler No gap in measurement, guide bars are overlapping Separate surface fence Large professional design (1800 x 150 mm) Tiltable 0-45° With quick adjustment Stable round bar guide made of ground steel Simultaneous opening Art. no.: 5500557