Hidravlične Enostebrne Stiskalnice nakup rabljenega (4.776)

Stanje: novo, Pressure: 100Motor: 11Installation Height: 500Max. Stroke Length: 400Ram Adjustment: 790 x 600Table Height: Floor to Top of Table - 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmWeight approx.: 5,500Oil Fill: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 bar Control / Key Switch Modes: Setup Mode – Manual, without light curtain Automatic Mode – Full speed with light curtain Hydraulic System: Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 units, Ø 50 x 30 mm Auxiliary Guides: 2 units, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc – 23 l/min, helical gear pump Speeds: Advance: 110 mm/sec Return: 200 mm/sec Pressure Phase: 9 mm/sec Machine Dimensions: Installation height: 500 mm Stroke length: 400 mm Ram plate: 790 x 600 mm (with T-slots) Table plate: 790 x 600 mm (with T-slots) Table height: 850 mm (from floor to top of table) Hydraulic Accessories: Hydraulic control block & components by REXROTH Bodpewrkctefx Akrsdc Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Pressure holding valve Control Accessories: Siemens S7-1200 control system Main control cabinet Safety PLC by SICK Safety light curtains by SICK (700 mm) Linear scale for stroke adjustment 10" BEIJER touchscreen (German & English) Movable two-hand control Ethernet interface for remote maintenance Fault indicator with light and audible alarm Dual workspace lighting Side safety doors (can be swung out) Hydraulic proportional valves Dual-channel safety control Operating manual & parts list (German) Complies with current machinery directive EN 693 Oil quantity: 220 liters (tank volume: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 light grey & RAL 7016 anthracite grey

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Bdjdpfswzzzfsx Akroc Ram Area: 900 x 600 mm Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Operating instructions & parts list (German), including maintenance plan

Stanje: novo, Pressure: 40 Stroke: 500 mm Table surface: 700 x 500 mm Installation height: 600 mm Rapid traverse: 26 mm/s Working speed: 9 mm/s Motor: 4 kW Bdjdpfx Akjwwx Areroc Features: - Two-stage hydraulic pump – compactly integrated in the machine frame - Lever and push-button operation – with secure two-hand control - Cylinder stroke: 500 mm – for versatile applications - Milled work table (bottom) – robust and precisely finished - Two working speeds – for fast and precise operation - Adjustable maximum pressure – individually adaptable to the application - Integrated manometer – for precise monitoring of working pressure

Stanje: novo, Pressure: 150 Stroke: 500 Table surface: 800 x 600 Installation height: 630 Bsdjwwx Afepfx Akrodc Rapid traverse: 22 Working speed: 3 Motor: 4 Dimensions (LxWxH): 1800 x 1200 x 2400 Approx. weight: 4500 Features: Two-stage hydraulic pump – compactly integrated into the machine frame Lever and button control – with secure two-hand operation Cylinder stroke: 500 mm – for versatile applications Milled work table (lower) – robust and precisely machined Two working speeds – for fast yet precise work Adjustable maximum pressure – individually adaptable depending on the application Integrated pressure gauge – for precise monitoring of working pressure

Stanje: novo, Pressure: 200 Bjdpfx Ajwwx Alskrjdc Stroke: 500 Table surface: 1000 x 600 Installation height: 640 Rapid traverse: 21 Working speed: 2 Motor: 5.5 Dimensions (LxWxH): 1800 x 1300 x 2500 Weight approx.: 6400 Features: - Two-stage hydraulic pump – compactly integrated into the machine frame - Lever and push-button control – with safe two-hand operation - Cylinder stroke: 500 mm – for versatile applications - Milled work table (lower) – robust and precisely manufactured - Two working speeds – for fast and precise operation - Adjustable maximum pressure – individually adaptable depending on application - Integrated manometer – for precise monitoring of working pressure

Stanje: novo, Pressure: 70 Stroke: 500 Table size: 700 x 500 Installation height: 600 Rapid advance: 25 Working speed: 5 Motor: 4 Dimensions (LxWxH): 1400 x 900 x 2250 Weight approx.: 1900 Features: Two-stage hydraulic pump – compactly integrated into the machine frame Lever and push-button control – with safe two-hand operation Cylinder stroke: 500 mm – for versatile applications Milled working table (bottom) – robust and precisely machined Bsdpjwwx Axefx Akredc Two working speeds – for fast yet precise operation Adjustable maximum pressure – individually adaptable depending on the application Integrated manometer – for precise monitoring of working pressure

Stanje: novo, Pressure: 100Stroke: 500Table surface: 800 x 600Installation height: 615Rapid advance: 26Working speed: 4Motor: 4Dimensions (L x W x H): 1600 x 900 x 2300Weight approx.: 3100Features:Two-stage hydraulic pump – compactly integrated into the machine frame Lever and button control – with safe two-hand operation Cylinder stroke: 500 mm – allows versatile applications Bodpfxowwxz Uj Akrsdc Milled working table (lower) – robust and precisely manufactured Two working speeds – for both fast and precise work Adjustable maximum pressure – individually adaptable to the application Integrated manometer – for precise monitoring of working pressure

Stanje: rabljeno, Leto izdelave: 2000, skupna dolžina: 1.000 mm, skupna širina: 1.900 mm, skupna višina: 2.000 mm, Farba: Sivá Prevádzková hmotnosť: 3 000 kg - Rok výroby: 2000 - Dokumentácia k dispozícii: Nie - Označenie CE prítomné: Áno - Certifikát CE k dispozícii: Nie - Sériové číslo: 205570 - Ovládanie: Konvenčné - Lisovacia sila [ton]: 160 - Max. zdvih [mm]: 100 - Dĺžka stola [mm]: 420 - Šírka stola [mm]: 410 Bodpfxoy Ew Euj Akredc - Priemer otvoru stola [mm]: 60 - Dĺžka piestu [mm]: 120 - Šírka piestu [mm]: 120 - Prepravné rozmery: 1000 mm x 1900 mm x 2000 mm (d x š x v) - Prepravná hmotnosť [kg]: 3 000 kg - Prepravné balíky [ks]: 1 Finančné informácie DPH: Uvedená cena je bez DPH DPH/režim rozdielu: DPH je možné odpočítať pre podnikateľov Doručenie a výkup možné kedykoľvek pre akékoľvek stroje z priemyselného sektora Lukas van Rossum

Stanje: novo, Leto izdelave: 2025, Tlak 060 t Hod 350 mm Bdjdpfx Aexu Nvzekrjc Površina mize 750x344 mm Vgradna višina 197/750 mm Razdalja med stebri 750 mm Premer bata 75 mm - Nova stroj - - Motorizirana izvedba - s fiksnim cilindrom, ročno nastavljanje višine mize, manometer za tlak v okviru in joystick za premikanje gor in dol (Art. št. 105166) * Za več informacij o točni serijski opremi in razpoložljivih opcijah obiščite našo spletno stran ali nas pokličite neposredno *

Stanje: novo, Leto izdelave: 2025, Tlak 100 t Hod 380 mm Površina mize 1100x424 mm Vgradna višina 180/750 mm Prehod med stebri 1100 mm Premer bata 90 mm - Nova stroj - - Motorni izvedbi - s nastavljivim cilindrom, hidravlična enota z avtomatskim preklapljanjem, ročna nastavitev višine mize s pomočjo verige, manometer v okviru in avtomatski povratek bata Bodpsxu Nv Isfx Akrjdc (art. št. 103633) * Za več informacij o točni serijski opremi in razpoložljivih možnostih obiščite našo spletno stran ali nas kontaktirajte neposredno *

Stanje: rabljeno, Leto izdelave: 2015, Tlak 30 t Hod 300 mm Svetla razdalja med stebri 700 mm Vgradna višina 850 mm Premer cilindra 140 mm Premer bata 60 mm Površina mize 700 x 390 mm Teža stroja pribl. 0,35 t Potreben prostor pribl. 1,2 x 0,8 x 2,2 m Delavniška stiskalnica - pomični cilinder - 2 kos podložnih prizem Bdodpjy Umbwofx Akrec - naprava za nujni izklop

Stanje: rabljeno, Machines for export from business liquidation Stock No. 62506 = Double Mitre Saw RAPID Type DGL 5000 / 500 = Weight approx. 1200 kg = Special price EUR 1,800 Stock No. 54183 = Hydraulic Press MÜLLER 10 ton. Without hydraulic pump = Weight approx. 1200 kg = Special price EUR 1,000 Stock No. 57780 = Hydraulic Press MÜLLER Type HEP 40 = Weight approx. 2200 kg = Special price EUR 1,900 Hydraulic Press – Hydraulic unit positioned separately = Weight approx. 3000 kg Stock No. 60507 = WEBO Drilling Machine with 4 heads = Weight approx. 1900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL Drilling Machine with 2 heads = Weight approx. 1700 kg = EUR 1,200 Stock No. 60699 = Column Drilling Machine WEBO MK5 = Weight 1600 kg = Special price EUR 1,600 Stock No. 60177 = Radial Drilling Machine WEBO Type R4bR = Weight approx. 2800 kg = Special price EUR 1,900 Bedpoy Erzdefx Akrsdc Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4000 kg = Special price EUR 1,900 --- Many more machines for export available immediately. For example: 10 pcs welding machines CLOOS, ESS etc. 2x CNC Lathes HITACHI SEIKI

Stanje: rabljeno, Leto izdelave: 1967, skupna dolžina: 2.000 mm, skupna širina: 1.750 mm, skupna višina: 2.850 mm, Barva: siva Lastna teža: 6.000 kg - Leto izdelave: 1967 - Dokumentacija na voljo: Ne - CE certifikat: Ne - Serijska številka: 1166 - Upravljanje: konvencionalno - Tlačna sila [ton]: 100 - Najv. hod [mm]: 250 - Dolžina mize [mm]: 740 - Širina mize [mm]: 500 - Hod pobijača [mm]: 250 - Prostor pod ramom [mm]: 350 - Transportne mere: 2000mm x 1750mm x 2850mm (d x š x v) - Transportna teža [kg]: 6000kg - Število transportnih paketov [kos]: 1 Finančne informacije DDV: Naveden cena ne vključuje DDV DDV/obračun razlike: DDV je odbiten za podjetja Bdsdpfxox N Sxdo Akrec Dostava in odkup možna kadarkoli za vse iz industrijskega področja. Lukas van Rossum

Stanje: novo, Pressure: 100 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 800 x 600 Ram area: 800 x 600 Table height: 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Approx. weight: 5,500 Oil capacity: 200 Control / Key switch: 1. Set-up mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Mounting height: 500mm Stroke length: 400mm Table plate: 800 x 600 (with T-slots) (custom designs possible) Ram plate: 800 x 600 (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Bdodpfx Akom Nntyjrsc Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2x workstation lighting 8 free inputs & outputs on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable safety Operating manual & parts list (German) With side safety door (doors slide to the rear)

Stanje: novo, Stroke length (max.): 400 mm Bdjdpfx Ajr Etuljkrjc Pump capacity: 45 cc – 65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Table area: 3500 mm x 2000 mm Clear width: 2200 mm Bridge travel: 2800 mm Return speed: 50 mm/sec Dimensions (LxWxH): 3500 x 3200 x 3600 mm Cylinder: Ø 370 mm – Capacity: 3000 kN (280 bar – 300 ton) Key Specifications: - Cylinder diameter: Ø 370 mm - Table dimensions: 3500 x 2000 mm (clear width: 2200 mm) - Load-bearing surface: 3000 x 2000 mm - Bridge travel: 2800 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Maximum installation height: 1200 mm (distance from table or cover plate to cylinder piston WITHOUT mandrels) - Stroke length: 400 mm - Motor: 22 kW (IE-3) - Pump: 45 cc – 65 L/min (KAWASAKI) - Forward speed: 10 - 5 mm/sec - Return speed: 50 mm/sec - Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Equipment: - Hydraulics: DUPLOMATIC - Control: Siemens S7-1200 - BEIJER 7'' display - Control cabinet mounted to side wall of bridge - Swivel operator panel - Pressure adjustable via display (50 – 300 ton) - Speed adjustable via throttle valve - Cylinder with chrome plating - Wired remote control - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3 phase power supply - Anti-rotation lock for cylinder - Lateral movement of cylinder via drive motor - Bridge movement via drive motor - Bridge area safeguarded by light curtain (Datalogic) - Cylinder mandrels: Ø 200 / 400 / 600 mm, in length - 3 extension mandrels included (Example photo)

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45cc–65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without base plate) / 820 mm (with base plate) Table dimensions: 3000 mm x 2000 mm Clearance width: 2200 mm Bridge traverse: 2300 mm Return speed: 50 mm/s Capacity: 3000 kN (280 bar – 300 tons) - Cylinder: Ø 370 mm - Table size: 3000 x 2000 mm; clearance width: 2200 mm - Bridge traverse: 2500 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Installation height: max. 1200 mm (distance from table or base plate to cylinder piston) WITHOUT MANDRELS - Stroke length: 400 mm - Pump: 45 cc – 65 L/min Bedpfsr D U I Djx Akrodc - Forward speed: 10 – 5 mm/sec - Return speed: 50 mm/sec - Motor: 22 kW (IE-3) - Table height: 750 mm (without base plate), 820 mm (with base plate) Accessories: - Hydraulics: DUPLOMATIC - Control: LENZE & SCHNEIDER - Control cabinet mounted on bridge sidewall - Pressure adjustable via rotary valve - Speed adjustable via throttle valve - Cylinder chrome-plated - Remote control (wired) - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3-phase - Rotary lock for cylinder - Cylinder laterally adjustable by drive motor - Bridge traversable by drive motor - Soft starter for motor - Cylinder piston mandrels: Ø 200 / 400 / 600 mm, long - 3 extension mandrels included (Sample photo)

Stanje: dober (rabljeno), Pressure 63 t Stroke -400 mm Installation height 700 mm Table size 1800x500 mm Bodpfsch Dacjx Akredc MARCELS MASCHINEN CH

Stanje: rabljeno, Tlak 100 t Hod 220 mm Svetla razdalja med stebri 1190 mm Vgradna višina 700 mm Premer cilindra 190 mm Premer bata 120 mm Površina mize 1600 x 800 mm Teža stroja cca 1,3 t Potrebni prostor cca 1,9 x 1,4 x 2,0 m Bjdpfx Ajy Ehxfjkrjdc

Stanje: novo, Stroke length (max.): max. 400 mm Table height: Floor to upper edge of table top 850 mm Installation height: 600 mm Speeds: Approach 120 mm/s, Pressing 13 - 4 mm/s, Return 170 mm/s Output: 65 L/min (REXROTH axial piston pump) Motor: 15 kW – 1500 RPM Dimensions (LxWxH): 2,100 x 2,400 x 4,300 mm Weight approx.: 11,000 kg Capacity: 1500 kN (150 tons – at 245 BAR) Operating Mode Selection: Via key switch - Manual / setup mode via two-hand operation without light curtain safety on front (always active at rear) - Automatic via two-hand operation at full speed (with active light curtain safety) Main cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs. Ø 70 x 50 mm Motor: 15 kW – 1500 RPM (IE-3) Pump: 45 cc – 65 L/min – REXROTH axial piston pump Speeds: Approach 120 mm/s – Pressing: 13 – 4 mm/s – Return 170 mm/s Clear width: 1300 mm Worktable: 1200 x 800 x 90 mm – with T-slots Ram plate: 1200 x 800 x 600 mm – with T-slots & ribbed reinforcement Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 850 mm (floor to upper edge of table top) Hydraulics: (Hydraulic accessories mounted on top of press) Control block & valves (REXROTH proportional valves) Pre-fill valve (NG.125) 8-fold guide system Hydraulic ram safety Mechanical ram safety for upper dead center position Pressure adjustment via PLC Speed adjustment via PLC Pressure hold valve for 600 sec Air cooler Automatic lubrication for guideways Auxiliary motor Auxiliary pump Control System: Main control cabinet (mounted laterally to press frame) Swiveling control panel SIEMENS S7-1200 KTP 9” SIEMENS touchscreen (language selection DE/ENG) Safety PLC (SICK) Light curtain for front & rear of working area (SICK 750 + 150 mm) Soft starter Movable two-hand control SECOMEA Ethernet connection Linear encoder for stroke adjustment (450 mm – NOVOTECHNIK 16 bit) Work area lighting (2x, IP66) - 8 free I/O ports at PLC for external connections ----- - Safety rail around hydraulic unit - Side access ladder ----- Documentation: Operator manual GERMAN (1x paper, 1x USB), Hydraulic & control diagrams Bdsdpfxempfwdo Akrec Parts lists CE certificate Standard: EN 16092/1/3 ----- Overall dimensions: approx. 2400 x 2100 x 4100 mm Total weight: approx. 11,000 kg Paintwork: frame RAL 7035 light grey

Stanje: rabljeno, Leto izdelave: 2025, skupna dolžina: 1.100 mm, skupna širina: 800 mm, skupna višina: 2.200 mm, Poids à vide : 540 kg Prix : Sur demande Cylindre de presse mobile - Année de fabrication : 2025 Bdjdpfx Ajw N St Hokrsc - Documentation disponible : Oui - Marquage CE : Oui - Certificat CE : Oui - Heures de fonctionnement : 0 - Commande : Conventionnelle - Modèle de presse : Presse à bâti en C - Force de pression [tonnes] : 60 - Course maximale [mm] : 380 - Longueur de la table [mm] : 1000 - Largeur de la table [mm] : 260 - Longueur du coulisseau [mm] : 100 - Profondeur de col de cygne [mm] : 750 - Réglage en hauteur [mm] : 750 - Puissance moteur : 2,2 kW - Dimensions de transport : 1100mm x 800mm x 2200mm (L x l x h) - Poids de transport [kg] : 540kg - Nombre de colis de transport : 1 Informations financières TVA : Le prix indiqué s'entend hors TVA TVA/Taxe sur la marge : TVA récupérable pour les professionnels Livraison et reprise possibles à tout moment pour tout matériel industriel Lukas van Rossum

Stanje: novo, Stroke length (max.): max. 400 mm Table height: Floor to top of table 900 mm Installation height: 600 mm Speeds: Advance 120 mm/sec, Pressing 13 - 4 mm/sec, Return 170 mm/sec Pump capacity: 103 L/min (REXROTH axial piston pump) Motor: 22 kW - 1500 rpm Dimensions (LxWxH): 2000 x 3200 x 4300 mm Weight approx.: 10,000 kg Oil filling: 700 L Hydraulic double-column press 250 t KK Kletzer Capacity: 250 Tonnes (at 245 BAR) Operation: Via key switch - Manual/setup mode with two-hand operation, without light curtain - Automatic mode with two-hand operation, full speed with light curtain Main cylinder: Ø 350 mm Auxiliary cylinders: 2 pcs. Ø 80 x 60 mm Motor: 22 kW – 45 hp Pump: 103 L/min REXROTH – axial piston pump Speed: Advance 120 mm/sec, Pressing 13 – 4 mm/sec, Return 170 mm/sec Clear opening: 1100 mm Table plate: 1000 x 1000 mm, T-slotted Ram plate: 1000 x 1000 mm, T-slotted & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 900 mm (floor to top of table) Hydraulics: - Block & valves (REXROTH) (hydraulic accessories mounted on top of press) - Pre-fill valve - Hydraulic & mechanical ram safety - Pressure adjustment via PLC (min. pressure 35 t) - Speed adjustment via PLC - Pressure holding valve for 600 sec. - Air cooler (temperature adjusted via screen) - Automatic lubrication for guides (adjustable via screen) - Sides of working area enclosed with sheet metal - Guide rails for parallelism - Auxiliary motors: 5.5 kW + 2.2 kW - Auxiliary pumps: 22 cc + 5.5 cc - Safety railing around hydraulics and side ladder - Oil tank: 800 liters - Oil quantity: approx. 700 liters Control system: - SIEMENS S7-1200 - Main switch cabinet - Movable control panel - Soft starter for motor Bdjdpfxsgta Rce Akrec - Safety PLC: SICK - PLC display 9’’ Siemens - Two-hand operation (movable) - Linear scale for stroke adjustment 450 mm – NOVOTECHNIK - Light sensor front & rear of working area – SICK 900 + 150 mm - SECOME & Ethernet connection for remote maintenance – Siemens - Dual workspace lighting - 8 free I/Os on PLC - Automatic pressure compensation for oil loss Documentation: - Operating manual in German - Hydraulic circuit diagrams - Control schematics The price stated is approximate, as steel prices are subject to change.

Stanje: novo, Pressure: 60 Motor: 11 Installation height: 450 mm Max. stroke length: 400 mm Table size: 600 x 500 x 80 mm Ram surface: 600 x 500 x 90 mm Table height: 850 mm Dimensions (L x W x H): 1,300 x 2,000 x 2,700 mm Weight approx.: 4,000 kg Oil fill: 200 L Control / key switch: 1. Setup mode, manual, without light sensor (max. 10 mm/sec speed) 2. Automatic mode (at full speed) with light sensor Main cylinder: Ø 150 mm Auxiliary cylinders: 2 pcs Ø 60 x 40 mm Auxiliary guide: 2 pcs Ø 40 mm Motor: 7.5 kW / 11 hp (IE3) Pump: 18 cc – 26 L / ASC Speed: advance 110 mm/sec – return 120 mm/sec; pressure: 11 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 600 x 500 x 80 mm (with T-slots) Ram plate: 600 x 500 x 90 mm (with T-slots) Table height: 850 mm (floor to top edge of table) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10–60 tonnes) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Bodpfxemmuq Is Akrodc Main control cabinet Swiveling operator panel Safety PLC: SICK Light sensors: SICK 700 + 150 mm Linear encoder for stroke length setting 7” PLC display – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for malfunctions (visual & audible) Double work area lighting 8 free I/Os on the PLC for external connections The press meets the Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating instructions & parts list (German) With side safety door (doors can be slid back)

Stanje: novo, Pressure: 60 Stroke: 250 Total power requirement: 7.5 kW Weight approx.: 4000 kg Dimensions (LxWxH): 1,820 x 960 x 2,400 mm Table size: 750 x 500 mm Ram surface: 500 x 430 mm Table borehole: 100 mm Installation height: 450 mm Working speed: 8.5 mm/s Return speed: 47 mm/s Rapid traverse: 26 mm/s Front light curtain Pressure adjustment Two-hand operation Bdsdpfxsd Ab Ixs Akroc T-slots in table and ram Stroke adjustment 2 ram round guides In accordance with CE regulations (Sample image)

Stanje: novo, Column spacing: 2000 x 1000 Return speed: 150 mm/s Approximate weight: 35,000 kg Stroke: 800 mm Total power requirement: 30 kW Installation height: 1000 mm Rapid traverse: 120 mm/s Pressure: 500 bar Bodpfx Akjd Aca Asrjdc Working table: 2500 x 1500 mm Working speed: 12 mm/s Dimensions (LxWxH): 2500 x 2700 x 5400 mm We also build custom presses for your specific application. DETAILS: 4-Column Press, 500 tons Capacity: 500 tons (at 250 bar – 510 tons) Control: Automatic via two-hand operation with key switch selection 1. Manual via operating panel for setup mode 2. Automatic with single cycle via two-hand operation, without drawing cushion Main cylinder: Ø500 mm Auxiliary cylinders: 2 pcs, Ø120 x 80 mm (move alongside main cylinders) Motor: 37 kW – 50 HP Pump: 100 cc = 150 l/min REXROTH axial piston pump Cylinder speed: Advance 150 mm/s – Return 170 mm/s – Pressure phase 15-8 mm/s Working area: 2500 x 1300 mm (Table & ram plate with T-slots) (T-slot dimensions as per customer drawing) Distance between columns: 2000 x 800 mm Installation height: 1000 mm (max. distance between table & ram plate) Stroke length: 800 mm (length adjustable via linear scale) Columns: Ø180 mm Hydraulic accessories: Hydraulic tank with control block & valves (complete REXROTH) Oil tank capacity: 1500 l; Oil volume: 1200 l Advance valves: 2 pcs Hydraulic & mechanical ram securing system Pressure regulator via PLC (min. pressure 60 tons) Air cooler Hydraulic accessories mounted on top of the press Auxiliary motors Auxiliary pump Filter: Rexroth Additional valve for spring-loaded opening Speed adjustment via display Hydraulic accessories mounted on top of the press Safety railing around hydraulic tank Side access ladder Control accessories: Controller: SIEMENS S7 1214 Safety PLC: SICK Swiveling control panel Ethernet connection for remote maintenance Two-hand operation (mobile, sufficient cable length for front & rear operation) Main control cabinet 12" Beijer PLC display Light sensors at front & rear – SICK 1000 + 150 mm Linear scale for stroke length adjustment (Novatechnik) Soft starter for main motor 8 free inputs & outputs Working area lighting On side of working area: windowed door secured with limit switch (400 x 600 mm) Table height: 1000 mm (floor to top edge of table plate) Total weight: approx. 35,000 kg Overall dimensions (LxWxH): approx. 2500 (including hydraulics) x 2700 x 5400 mm (including railing) Foundation: mandatory The price is valid until 30.12.2022! Training and commissioning are included in the price.

Stanje: novo, Bore in table: 120 mm Draw cushion return speed: 52 mm/s Draw cushion stroke: 200 mm Draw cushion pressing force: 30 t Motor power: 11 kW Return speed: 165 mm/s Working speed: 8.5 mm/s Rapid traverse: 100 mm/s Installation height: 750 mm Pressure: 100 t Ram dimensions: 900 x 600 mm Table size: 1100 x 700 mm Dimensions (LxWxH): 2,180 x 1,600 x 3,350 mm Approx. weight: 9,300 kg Bdedpfx Akjd Ab Imjrsc Total power requirement: 11 kW Stroke: 500 mm Equipment: - Light barrier - Draw cushion - Manual and automatic operation - Self-lubricating ram guides - Execution according to CE regulations