Heuft Systemtechnik Gmbh Inšpektor Za Prazne Steklenice nakup rabljenega (115.224)

Stanje: rabljeno, Leto izdelave: 2016, Inšpekcijski stroj za kontrolo praznih steklenic pred polnjenjem. Pregleduje se dno, stranska stena in vrat steklenice. Poleg tega se identificirajo steklenice z ostanki lužil iz procesa čiščenja steklenic. Pred inspektorjem se nahaja še ena inšpekcijska enota, ki predhodno izloči tuje in poškodovane steklenice. Merila se beležijo s kamerami kot tudi s HF- in IR-tehnologijo. Stroj (dodatno): Kontrola praznih steklenic Guodoy Nnbbopfx Afwob Kapaciteta polnilne linije: 12.000 steklenic/uro Električni tok: 6 A Napetost: 400 / 230 V Frekvenca: 50 Hz Smer teka: levo -> desno Upravljanje / krmiljenje: Simatic S7 Lokacija / pozicija: v ohišju na nogah Osnovna konstrukcija: ravni transporter Oprema: upravljalni in vizualizacijski panel, ohišje z varnostnimi vrati, izločanje steklenic.

Stanje: rabljeno, Leto izdelave: 2000, Pregledovalnik praznih steklenic Proizvajalec: Krones Model: Linatronic 712-M1; Letnik: 2000 Stroj (dodatno): Stroj za pregled praznih steklenic Gedpfx Aow Taypofweub Zmogljivost: 32.000 steklenic/uro Dolžina: 4200 mm Širina: 1100 mm Višina: 2900 mm Formati: 0,5L NRW, 0,33L Vichy, 0,33L Euro, 0,35L Limonada Smer delovanja: desno -> levo Upravljanje: Simatic S7-300 Postavitev: samostoječ Osnovna konstrukcija: okvir iz kvadratnih cevi na kalotnih nogah Oprema: osnovni stroj, sistemi za zaznavanje in pregled, sistemi za izločanje, napajanje / zaščita stroja, pogoni, transportni trak

Stanje: rabljeno, Leto izdelave: 2016, Heuft inspektor za prazne boce, opremljen sa: - kontrola ulaska sa zaustavljanjem trake - inspekcija dna - inspekcija grla boce - IR detekcija preostale tečnosti - HF detekcija preostale tečnosti - jednostavna detekcija bočnog zanošenja na izlazu - jedno-segmentno izbacivanje sa kontrolom izbacivanja Mašina (dodatno): Mašina za inspekciju boca Kapacitet: 8000 boca/sat Napon: 400 volti Frekvencija: 50/60 Hz Pritisak vazduha: minimum 5 bara Dužina: 2030 cm Širina: 950 cm Gedsw S T N Ijpfx Afwoub Visina: 1830 + visina transportne trake cm Smer kretanja: desno -> levo Rukovanje / upravljanje: Heuft Spectrum reflexx, Heuft speedy lokalna kontrola za upravljanje motorima Pozicija: samostojeća Periferija: sinhronizovani segmenti za transport ambalaže nakon inspektora Težina: 1600 kg

Leto izdelave: 2017, stanje: rabljeno, Leerlflascheninspektor zur Überwachung leerer Glasflaschen. Folgende Kriterien werden von der Maschine über Kameras, Hochfrequenz und Infrarot inspiziert: - Kontur, Höhe, Farbe - Seitenwand - Restlaugeerkennung - Mündung - Gewinde - Restflüssigkeitserkennung - Bodeninspektion - Glasscherben- und Folienerkennung - Dichtflächeninspektion Flaschen außerhalb der Spezifikationen werden über Pusher ausgeschleust. Maschine (Zusatz): Geradläufer in Modulbauweise Strom: 6 A Spannung: 400 / 230 V Frequenz: 50 Hz Wasser: 3-5 bar Druckluft: 6-10 bar, 1/2"-Anschluss Länge: 2980 mm Formate: 1,0 l; 0,5 l; 0,2 l Laufrichtung: rechts -> links Bedienung / Steuerung: Simatic S7-300 Lage / Position: auf Füßen stehend Basiskonstruktion: Geradläufer Ausstattung: Kamera, Seitenwandmodule, Testflaschenerkennung, Hochfrequenz- und Infrarotinspektion, Seitenmündungsinpektion, Gewindeinspektion, Dichtflächeninspektion, Lichtschranke, Pusher am Ein- und Auslauf, Ausleitkontrolle, Bedienpanel Gusdpfx Afsyr Ifkowob

Stanje: rabljeno, Leto izdelave: 2003, Inšpektor praznih steklenic za steklene steklenice Stroj (dodatno): stroj za pregled praznih steklenic Zmnožnost polnilne linije: 7000 steklenic/uro Moč: 2000 VA Napetost: 230 voltov Frekvenca: 50/60 Hz Formati: 0,5 l NRW, 0,33 l Steinie, 0,33 l Longneck Guodpfxsxbn Uve Afweb Upravljanje / Krmiljenje: Heuft Položaj / Postavitev: prosto stoječ Osnovna konstrukcija: samonosilno ohišje / miza stroja, na kvadratnih ceveh z kupolastimi nogami

Leto izdelave: 2007, stanje: rabljeno, Stroj (dodatno): kontrola preostalih tekočin, dna, ustja, stranske stene Moč: 3,6 kW Napetost: 400 V Frekvenca: 50/60 Hz Gjdpfxexbpg Ho Afwjub Stisnjen zrak: min. 6 - maks. 10 bar Dolžina: 2,5 m Širina: 1 m Višina: 2,5 m Formati: Longneck, Steini, Vichy 0,33 l steklenice / 0,5 l Longneck, NRW 0,5 l steklenice Smer teka: desno-levo Upravljanje / Krmiljenje: Heuft Oprema: preostala tekočina, dno, ustje, stranska stena Teža: 1700 kg

Stanje: rabljeno, Leto izdelave: 1991, Machine (additional feature): Empty bottle inspection Rated output: 60,000 bottles/h Power: 10.7 kW Water: max. 4 bar, consumption: 1.3 l/min Compressed air: 6 bar, consumption: 2.5 bar, 30 Nm³/h Length: approx. 2,995 mm Width: approx. 2,370 mm Height: approx. 2,600 mm Formats: 0.33 l LongNeck, 0.5 l NRW bottles, bottle height: min. 150 mm / max. 350 mm, bottle diameter: 50–71 mm Gjdpfx Asvcqyhofwoub Machine pitch: 94 mm Operation / control: Siemens S5 Equipment: Inspections: bottom inspection, finish (mouth) inspection, sidewall inspection, high-frequency caustic detection, infrared residual liquid detection, evaluation for identifying and ejecting bottles with heavy abrasion, height detection Weight: 5,200 kg

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Throughput capacity: 24,000/h, belt speed: 0.5 m/s, formats: 0.25l GASTRO / 0.5l GASTRO / 0.7l GBD / 0.75l GBD, GASTRO, with sorting system HEUFT SPECTRUM SX TI 36, system was overhauled in October 2021. Godehix Ukopfx Afwsub

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Output capacity: 39,600/h, additional accessories are available. Guodomdry Hopfx Afweb

Stanje: rabljeno, Leto izdelave: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK, and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and covers all major processing steps from depalletizing to palletizing. The labeller will be finalized according to the buyer’s requirements, allowing the system to be tailored to the intended bottle types and product portfolio. This system is suitable for returnable glass beverage applications. Based on the listed machines, the line is set up for crate handling, bottle washing preparation, empty bottle inspection, high-performance filling/capping, and repacking of returnable crates. For bottles with screw caps, the RINK machine can be integrated upstream of the bottle washer; for crown cap bottles, an additional format kit is required as per your note. Godpfx Afoytvyfewjub Technical Data - Capacity: 33,000 bottles/hour - System type: Returnable glass bottling line - Main machine year of manufacture: mostly 1998 or later - Bottle type: Returnable glass bottles - Closure types: Crown cork and screw cap - Packaging type: Beverage crates / returnable plastic crates - Filling system: KRONES isobaric filling block - Special notes: - RINK KM 790/4K-3K QL: only for bottles with screw caps - For crown cap bottles, an appropriate format kit is required - Labelling machine: supplied/completed according to customer requirements Scope of Supply - Depalletizer | Profipack | – | 2006 - Decrater | KRONES | Linapac A-T 1600 | 1998 - Crate washer | Hormes | Crate washer | 1992 - Case opener | RINK | KM 790/4K-3K QL | 2020 - Bottle washer | KRONES | Lavatec-KES | 1998 - Empty bottle inspector | HEUFT | Spectrum TX | 2015 - Filler block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 - Labeller | to be assembled per customer requirements - Crater | KRONES | Linapac F-T 1800 | 1998 - Palletizing system | Profipack | 2006 - Pallet wrapper | Robopack | 2006 - Pallet securing | Vertical strapping | 2006 Additional Information Bottle formats: - 0.25 l single bottle – Ø 57.5 × 215 mm - 0.33 l ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 l ale bottle – Ø 68.5 × 234.5 mm - 0.5 l ale bottle – Ø 68.5 × 270 mm - 0.5 l steinware bottle – Ø 70.5 × 174 mm - 0.5 l Bavaria bottle – Ø 70 × 260 mm - 0.5 l NRW bottle – Ø 67 × 260 mm - 0.5 l single bottle – Ø 82 × 295 mm - 0.7 l GDB bottle – Ø 79 × 290 mm - 0.75 l GDB bottle – Ø 79 × 290 mm - 1.0 l GDB bottle (lightweight) – Ø 84 × 305 mm - 1.0 l AMG bottle – Ø 83.7 × 298 mm Crate formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Stanje: rabljeno, Leto izdelave: 2012, Overview  This complete returnable glass bottle filling line was manufactured in 2012 by leading European producers Krones, Sidel, and Kettner. The system is designed for high-output beverage production, handling up to 42,000 bottles per hour in the 0.33-liter contoured bottle format. It includes all necessary components from depalletizing to final palletizing and labeling, providing a turnkey solution for filling operations. The line underwent its annual maintenance in August 2025 and was decommissioned on September 1, 2025. It remains installed and connected, and can be inspected upon request. Technical Specifications Capacity: 42,000 bph Formats: 0.33 L contoured bottle Applications: Beer, CSDs or other beverages in returnable glass bottles Line dimensions: approximately 103 × 29 m Condition: Excellent; serviced until decommissioning (September 2025) Availability: Immediate Status: Still installed and connected Scope of delivery Depalletizer | Kettner | 60 pallets/h | 1992 | Automatic, for glass bottles Case unpacker (Decrater) | Kettner | 2,500 crates/h | 1992 | For returnable crates Case washer | Seroba | 2,500 crates/h | 1992 | Stainless steel, single tank Bottle washer | Krones | 47,200 bph | 2010 | Multi-zone cleaning Empty bottle inspection | Heuft | 46,000 bph | 2012 | Camera system Filler | Krones | 42,300 bph | 2012 | Glass bottles, counter-pressure operation Labeller | Krones Topmatic | 2012 | 2 stations (body & back label), 125mm pitch + Checkmat Fill level & closure control | Heuft | 43,000 bph | 2012 | Sensor & camera system CIP & mixer station | KHS | 16,500 l/h | 2011 | Integrated, fully automatic Printer | Videojet | 43,000 bph | 2012 | Inkjet printer Packer (Crater) | Kettner | 2,200 crates/h | 1992 | Automatic Palletizer | Kettner | 50 pallets/h | 1992 | Automatic Pallet wrapper | Robopac | 50 pallets/h | 1992 | With stretch film Pallet labeller | Logopak | 60 pallets/h | 2014 | Pallet labeling Bottle conveyors | Sidel Gebo | – | 2012 | Stainless steel conveyor technology Godpfx Aoxrcv Nsfwoub

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 690 mm, skupna dolžina: 600 mm, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, potrebna višina: 900 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, making it ideally suited for small parts or, for example, nameplates. Due to its compact design, the machine is very practical and can be used virtually anywhere. The device is very easy to operate and requires no programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created in just a few clicks, without extensive programming skills. The software automatically increments serial and item numbers after initial setup. In addition, the software can retrieve data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also possible. A laptop with a Windows operating system and laser software comes as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 30-watt fiber laser (optional: 20 watts, 50 watts) - Laser class 1 - Wavelength 1064 nm - Marking field size 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (easy preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm Gusdpfx Ajy I Nbmefweb - Grid bores for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: Fume extraction (incl. activated carbon filter) - Welded construction made of sheet steel - 230 V connection - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (W x D x H): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, hitri pomik os Y: 20 m/min, največja hitrost vretena: 60.000 obr/min, montažni premer: 3 mm, skupna širina: 800 mm, vrsta vhodnega toka: Klimatska naprava, dolžina mize: 320 mm, višina mize: 560 mm, trajanje garancije: 12 meseci, delovna širina: 560 mm, temperatura okolja (min.): 18 °C, okoljska temperatura (maks.): 30 °C, priključek za stisnjen zrak: 6 letvica, delovna dolžina: 320 mm, število osi: 3, The compact table-top version LOW MINI was specifically developed for depaneling small-format series, small quantities of large-format PCBs, and cost-conscious production. PCB materials with remaining tab connections can be quickly and economically separated up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled in all axes, with the milling spindle operating from above. The real highlight of the machine is the easy and straightforward switch of working area from small (320x280mm) to large (320x560mm) format. • Short cycle times due to shuttle operation • X-/Y-axes with linear motor technology • PCB fixation with pin technology • Flexible handling • PCBs with residual tab connections Gsdjxmfdxjpfx Afweub • Milling spindle adjustment with servo technology • Extraction unit • Easy operation • Excellent price/performance ratio Manual depaneling – flexible and cost effective The concept of manual depaneling offers significant advantages in terms of flexibility and cost. Medium batch sizes can be quickly and with minimal dust separated using the LOW MINI. The standard version features dual loading with linear motor technology; for enlarging the working area, single-shuttle operation is possible. Ease of maintenance and operation, combined with the outstanding price/performance ratio, provide a comfortable working experience, making the investment in this depaneler economically worthwhile as well. Axis speed: 160mm/s Repeatability: 0.02 mm Separation accuracy: 0.1mm Shank tools: 0.8 - 2.4mm

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 350 mm, skupna širina: 605 mm, skupna višina: 1.080 mm, vhodna napetost: 230 V, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 70 mm, širina območja skeniranja: 70 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base frame, it can be moved directly to the workpieces to be marked. This makes it suitable for both large, heavy, and small workpieces. The powerful laser software enables text, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a hand scanner is also possible. Made in Germany Gedsu Smcbspfx Afwjub • Fiber laser 20W (optional: 30 watt, 50 watt) • Laser class 1 • CE compliant, according to EU directives • Wavelength 1064nm • Marking field size 70x70mm (optional: 110x110mm) • Signal light for operating status (on handheld unit) • Marking software: EZCAD • Power connection: 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of portable laser unit (handheld): 2.8 kg • Fiber optic cable approx. 2.50 m • Integrated extraction system

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 1.500 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, skupna masa: 120 kg, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, potrebna širina: 1.550 mm, potrebna višina: 2.100 mm, valovna dolžina laserja: 1.064 nm, vhodna frekvenca: 50 Hz, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is designed for a wide range of marking applications. Thanks to its integrated fiber laser, you can mark nearly all materials, including steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, utilizing a laser for permanent marking has become indispensable. The powerful laser software enables easy creation of texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no advanced programming knowledge required. The software can automatically increment serial and article numbers as preset. In addition, it can import data (such as drawing numbers, project labels, etc.) from existing tables and automatically transfer them to predefined fields. The use of a hand scanner is also supported. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be outfitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (larger sizes optional) • Signal lamp indicating operational status • Options: rotary axis (3-jaw chuck) • Options: extraction unit (including activated carbon filter) • Options: digital height measuring system • Options: autofocus system for automatic focus adjustment • EZCAD marking software in German/English (other software available on request) • Pilot laser (easy preview, plain text preview) • Focus finder (simple focus adjustment) • Max. component height: approx. 300 mm • Electrically adjustable Z-axis • Integrated PC running Windows • Height-adjustable monitor and keyboard mount • Frame made of aluminum profiles • Air-cooled • Door width: approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) Godpfx Afsrxrrhswjub with monitor mount: approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, skupna masa: 150 kg, skupna višina: 2.300 mm, skupna dolžina: 1.200 mm, skupna širina: 600 mm, model krmilnika: SPS-Steuerung, delovna širina: 300 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, število predalov: 1, natančnost pozicioniranja: 1 mm, delovna višina: 30 mm, delovna dolžina: 400 mm, delovno območje: 400 mm, Oprema: CE označba, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head Guedpfjyx Hgbjx Afwjb • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.500 mm, skupna višina: 2.050 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, natančnost ponavljanja: 0,01 mm, vrsta laserja: vlakenski laser, Oprema: USB priključek, osvetlitev, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software automatically increments serial and item numbers after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side cantilevers for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Guedsyxccrspfx Afwjb Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction unit (including activated carbon filter) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touchscreen and height-adjustable keyboard platform • Aluminum profile frame • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, položaj glave za glodanje: mittig, največja hitrost vretena: 60.000 obr/min, skupna višina: 1.550 mm, skupna dolžina: 1.870 mm, skupna širina: 1.040 mm, največja hitrost vrtenja: 60.000 obr/min, vrsta vhodnega toka: trifazni, skupna masa: 560 kg, delovno območje: 420 mm, trajanje garancije: 12 meseci, vrsta pogona: Linearmotor, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Semi-automatic depaneling / Base machine with parallel shuttle The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes and meets the growing demands of the production process. PCB panels made of various materials are separated with maximum product flexibility, precision, and throughput using dust- and stress-minimizing sawing and milling techniques. Highly dynamic linear motor axes, tools, and grippers meet the highest quality standards, guaranteeing the depaneling machine superior durability and reliability. Semi-automatic depaneling – Solutions tailored to your needs The LOW 4322 allows for fast product changeovers while maintaining short separation and handling times. Panel loading is carried out via a parallel shuttle, with pick-up and fixation via pin clamping technology, and, if required, in combination with vacuum suction cups. Guedpfxoxt Dk Rs Afwob Made in Germany The machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measuring system • Dual loading module designed as a parallel shuttle, separate left and right with sliding doors • Profile frame with two maintenance doors – left and right, ESD compliant • Standard vision system base module for teach-in programming • Working area of 420 x 330 mm per side • Automatic cutter length compensation • Remote maintenance/support via remote connection • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Cutter breakage control for slot cutters only • Prepared for vacuum clamping technology • Disc and sliding doors ESD compliant An optional dust extraction unit can be offered retrofitted if needed.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna širina: 600 mm, skupna dolžina: 1.200 mm, skupna višina: 2.300 mm, skupna masa: 150 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, delovno območje: 400 mm, višina izdelka (maks.): 30 mm, model krmilnika: SPS-Steuerung Siemens Simatic HMI, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, natančnost pozicioniranja: 1 mm, Oprema: CE označba, dokumentacija / priročnik, osvetlitev, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) Gedpfx Asyx Hrksfweub • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small parts. Thanks to its compact design, the unit is highly practical and can be used anywhere. Gujdpoy Emthefx Afwob The device is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created and marked with just a few clicks and minimal programming knowledge. The software automatically increments serial and article numbers after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. A laptop with Windows operating system and laser software is included as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 watt (optional: 30 watt, 50 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-trap safety stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, vrsta hlajenja: zrak, skupna masa: 120 kg, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, potrebna širina: 1.550 mm, potrebna višina: 2.050 mm, valovna dolžina laserja: 1.064 nm, vhodna frekvenca: 50 Hz, The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent markings, the use of a laser is indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos in just a few clicks, without advanced programming knowledge. The software can automatically increment serial and article numbers after initial setup. Furthermore, the software is capable of reading data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transferring it to predefined fields. The use of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W, or 50W Gjdpfx Afjxd Az Njwjub • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optional larger) • Signal light to indicate operating status • Optional: rotary axis (3-jaw chuck) • Optional: fume extraction (including activated carbon filter) • Optional: digital height measuring system • Optional: autofocus system for automatic focus distance determination • Optional: extension arms for large components (one-sided, double-sided) • Marking software EZCAD in German / English • Pilot laser (simple preview, plain text preview) • Focus finder (easy focus adjustment) • Max. part height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Monitor and keyboard tray with adjustable height • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (pass-through): approx. 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small components. Due to its compact design, the system is highly practical and can be used anywhere. The device is very easy to operate even without programming skills. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optionally: 20 watt) - Laser class 1 - Wavelength 1064nm Gusdswkpxkopfx Afweb - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta hlajenja: zrak, valovna dolžina laserja: 1.064 nm, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. Laser marking has become indispensable in many industries for permanent labeling. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without advanced programming skills. Serial and part numbers can be automatically incremented by the software following initial setup. Furthermore, the software can retrieve data (variable information such as drawing numbers, project names, etc.) from existing spreadsheets and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard configuration includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30-watt, 20-watt, or 50-watt options • Laser class 1 • Wavelength: 1064nm • Marking field size: 150x150mm (larger sizes optional) • Signal lamp for operating status indication • Optional: rotary axis (3-jaw chuck) • Optional: extraction system (incl. activated carbon filter) • Optional: digital height measuring system • Optional: autofocus system for automatic determination of focus distance • Marking software EZCAD in German / English (other software available on request) • Pilot laser (simple preview, plain text preview) • Focus finder (easy focus adjustment) • Max. component height: approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • IPS PCAP touch screen and adjustable keyboard tray Guodpfxowlc Stj Afwjb • Frame made from aluminum profiles • Air-cooled • Door width: approx. 700mm / Door height (pass-through): approx. 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts or, for example, nameplates. Thanks to its compact design, the system is highly practical and can be used anywhere. The device is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without the need for extensive programming expertise. Serial and article numbers can be automatically incremented by the software after a simple initial setup. Furthermore, the software can import data (variable information such as drawing numbers, project names, etc.) directly from existing tables and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 Watt (optional: 30 Watt) Gedpfjw Et Ilsx Afweub - Laser class 1 - Wavelength 1064nm - Marking area size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-pinch protection - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Power supply 230V - Air cooled - Laptop with Windows operating system (German or English) - Dimensions: W x D x H 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, including steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. The use of lasers for permanent marking has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Lot and article numbers can be automatically incremented by the software after prior configuration. Additionally, the software can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also supported. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side arms for marking long parts, movable Z-axis, drawer systems, etc., are available. Programmable, software-controlled axes (X, Y, Z axes) and database connectivity are also possible. Gsdowkpvvepfx Afwjub Made in Germany Fiber laser: 30 W, 20 W or 50 W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optionally available) • Marking software: EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – for automatic focal distance determination • Optional: programmable X, Y, and Z axes (software-controlled) • Pilot laser (easy preview, contour preview) • Focus finder (for easy focus adjustment) • Signal beacon for operating status display • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard support • Frame made of aluminum profiles • Air cooled • Door width approx. 700 mm / Pass-through door height: 400 mm • 230 V power connection • Dimensions: approx. 900 x 800 x 1900 mm (L x W x H) • Weight: approx. 120 kg