Hess Hydromat Hs Iii nakup rabljenega (4.473)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Nemčija
650 km
Tovarna za proizvodnjo betonskih blokov
HessHydromat HS III
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Na voljo je stacionarni stroj za izdelavo betonskih stopničastih kamnov Hess. Proizvodna površina X/Y: 750 mm/1500 mm, proizvodna višina: 300 mm, dimenzije desk X/Y/Z: 1700 mm/550 mm/300 mm, material desk: aluminij, število desk: 290, vibracijski postaji: 2, tip vibracijske postaje: HFZ 2500, vibracijska sila: 89,5 kN, obstoječi tipi kalupov: stopničasti blok s posnetjem/stopničasti blok Ortenau/globoki robnik, krmiljenje: Siemens SPS. Vključno s transportnim trakom z napravo za obračanje za 180° in dvema dvižnima napravama, dvižnim lestvami, potisnim odrom, izravnalno lestvijo, izhodom desk, čiščenjem desk in skladiščem desk. Kompaktni zunanji vibratorji so bili predelani v tlačne vibratorje. Gre za celoten obrat s perifernimi in transportnimi enotami. Dokumentacija je na voljo. Ogled na lokaciji je možen.
Hfsdpfjy Rtg Ssx Adroh
Mali oglas
Helmstedt
738 km
Tri-nož semi-avtomatski
Sperr & LechnerHydromat SL III M-900
Pokliči
Stanje: delavnici obnovljeno (rabljeno),
Mali oglas
Avstrija
237 km
Stroj za okroglo krivljenje pločevine - 4 valji
HESSE by SAHINLER4R HS 15-150
Pokliči
Stanje: novo, Condition: new
Delivery time: approx. 12 weeks from order
Country of origin: Turkey
Price: €28,450
Leasing rate: €543.40
Bending length: 1,550 mm
Max. bending capacity – construction steel: 7 mm
Max. sheet thickness without pre-bending at D=5x top roller: 7 mm
Max. sheet thickness without pre-bending at D=1.5x top roller: 4.5 mm
Max. sheet thickness with pre-bending at D=5x top roller: 4.5 mm
Max. sheet thickness with pre-bending at D=1.5x top roller: 3.5 mm
Top roller diameter: 150 mm
Hsdpsyb Szhofx Adrsfh
Bottom roller diameter: 150 mm
Side roller diameter: 130 mm
Rolling speed: 1.5 / 6 m/min
Motor power: 4 kW
Length: 3,750 mm
Width: 960 mm
Height: 1,100 mm
Weight: 2,500 kg
4 rollers
Top roller driven by hydraulic motor and planetary gearbox, lower rollers driven by gear and cardan shaft
Hydraulic adjustment of lower and side rollers
Digital display for lower and side roller positions
Hardened rollers
Cone bending device
Hydraulic release of top roller
Hydraulic drop-end bearing
2 working speeds
Overload protection
Mobile control panel
Equipment according to CE directive
OPTIONS:
(Delivery time with options approx. 10 weeks)
Infinitely variable rolling speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT POINTS FOR CONICAL ROLLING:
Maximum sheet thickness is 50% of rated capacity
Cone length must be max. 30% or more than 60% of roller length
Hardened rollers are recommended

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HS 30-245
Pokliči
Stanje: novo, Condition: new
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €55,900
Leasing rate: €1,056.51
Bending length: 3,100 mm
Max. bending capacity (mild steel): 9 mm
Max. sheet thickness without pre-bending at D=5x top roller: 8 mm
Max. sheet thickness without pre-bending at D=1.5x top roller: 7 mm
Max. sheet thickness with pre-bending at D=5x top roller: 7 mm
Max. sheet thickness with pre-bending at D=1.5x top roller: 5 mm
Top roller diameter: 245 mm
Bottom roller diameter: 245 mm
Side roller diameter: 180 mm
Rolling speed: 1.5 / 6 m/min
Motor power: 7.5 kW
Length: 5,350 mm
Width: 1,600 mm
Height: 1,470 mm
Weight: 6,850 kg
4 rollers
Top roller drive via hydromotor and planetary gearbox, bottom roller drive via gear and cardan shaft
Hydraulic adjustment of bottom and side rollers
Digital readout for bottom and side roller positions
Hardened rollers
Cone bending device
Hydraulic relief for top roller
Hydraulic drop-end bearing
2 working speeds
Overload protection
Mobile control panel
CE-compliant equipment
OPTIONS:
Infinitely variable rolling speed
Hydraulic side support
Hydraulic top support
Hjdpfjyb Sz Iex Adrefh
NC control
IMPORTANT NOTES FOR CONICAL BENDING:
The max. sheet thickness is 50% of the nominal capacity
The cone length must be a maximum of 30% or more than 60% of the roller length
Hardened rollers are recommended
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HS 25-220
Pokliči
Stanje: novo, Condition: new
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €48,100
Leasing rate: €918.71
Bending length: 2,550 mm
Max. bending capacity (mild steel): 9 mm
Max. sheet thickness without pre-bending at D=5x top roll: 9 mm
Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm
Max. sheet thickness with pre-bending at D=5x top roll: 7 mm
Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm
Top roll diameter: 220 mm
Bottom roll diameter: 220 mm
Side roll diameter: 160 mm
Rolling speed: 1.5 / 6 m/min
Motor power: 5.5 kW
Length: 4,900 mm
Width: 1,150 mm
Height: 1,250 mm
Weight: 4,600 kg
4-roll system
Top roll drive via hydraulic motor and planetary gearbox, bottom rolls driven by gears and cardan shaft
Hydraulic adjustment of bottom and side rolls
Digital display for bottom and side roll positions
Hardened rolls
Cone bending device
Hydraulic release of the top roll
Hydraulic drop end
2 working speeds
Overload protection
Mobile control panel
Equipment complies with CE regulations
OPTIONS:
Infinitely variable rolling speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT POINTS FOR CONICAL BENDING:
The max. sheet thickness is 50% of the nominal capacity
The cone length may be max. 30% or must be more than 60% of the roll length
Hardened rolls are recommended
Hedpfxoyb Sywj Adrsfh
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HS 20-245
Pokliči
Stanje: novo, Condition: new
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €49,900
Leasing rate: €953.09
Bending length: 2050 mm
Max. bending capacity (mild steel): 13 mm
Max. sheet thickness, pre-bending at D=5x top roll: 13 mm
Max. sheet thickness, pre-bending at D=1.5x top roll: 10 mm
Max. sheet thickness, with pre-bending at D=5x top rolls: 10 mm
Max. sheet thickness, with pre-bending at D=1.5x top roll: 8 mm
Top roll diameter: 245 mm
Bottom roll diameter: 245 mm
Side roll diameter: 180 mm
Rolling speed: 1.5 / 6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1470 mm
Weight: 5450 kg
4 rolls
Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft
Hydraulic adjustment of bottom and side rolls
Digital display for bottom and side roll positions
Hardened rolls
Cone bending device
Hydraulic relief of the top roll
Hydraulic drop-end bearing
2 working speeds
Overload protection
Mobile control panel
Hfsdpfx Adeyb Sydoreh
Equipment compliant with CE specifications
OPTIONS:
Stepless variable rolling speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT POINTS FOR CONICAL BENDING:
The max. sheet thickness is 50% of the nominal capacity
The cone length must be max. 30% or more than 60% of the roll length
Hardened rolls are recommended
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HS 20-150
Pokliči
Stanje: novo, Condition: New
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €31,600
Leasing rate: €603.56
Bending length: 2,050 mm
Max. bending capacity - mild steel: 6 mm
Max. plate thickness without pre-bending at D=5x top roll: 6 mm
Max. plate thickness without pre-bending at D=1.5x top roll: 4 mm
Max. plate thickness with pre-bending at D=5x top roll: 4 mm
Max. plate thickness with pre-bending at D=1.5x top roll: 3 mm
Top roll diameter: 150 mm
Lower roll diameter: 150 mm
Side roll diameter: 130 mm
Rolling speed: 1.5 / 6 m/min
Hfodpfoyb Szbox Adreh
Motor power: 4 kW
Length: 4,250 mm
Width: 960 mm
Height: 1,100 mm
Weight: 2,800 kg
4 rolls
Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft
Hydraulic adjustment of the lower and side rolls
Digital display for lower and side roll positions
Hardened rolls
Conical bending device
Hydraulic top roll release
Hydraulic drop-end bearing
2 working speeds
Overload protection
Movable control panel
Equipment in accordance with CE regulations
OPTIONS:
Infinitely variable rolling speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT POINTS FOR CONICAL ROLLING:
Max. plate thickness is 50% of the nominal capacity
The cone length may be max. 30% or must be more than 60% of the roll length
Hardened rolls are recommended
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HS 25-260
Pokliči
Stanje: novo, Condition: New
Hfodpjyb Sy Refx Adreh
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €57,000
Leasing rate: €1,077.30
Bending length: 2,550 mm
Max. bending capacity - structural steel: 13 mm
Max. plate thickness without pre-bending at D=5x top roll: 13 mm
Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm
Max. plate thickness with pre-bending at D=5x top roll: 10 mm
Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm
Top roll diameter: 260 mm
Lower roll diameter: 260 mm
Side roll diameter: 200 mm
Rolling speed: 1.5 / 6 m/min
Motor power: 7.5 kW
Length: 4,800 mm
Width: 1,600 mm
Height: 1,550 mm
Weight: 6,800 kg
4 rolls
Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft
Hydraulic adjustment of lower and side rolls
Digital display for lower and side roll positions
Hardened rolls
Conical bending device
Hydraulic top roll relief
Hydraulic drop-end bearing
2 working speeds
Overload protection
Mobile control panel
Equipment in accordance with CE regulation
OPTIONS:
Infinitely variable rolling speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT POINTS FOR CONICAL BENDING:
Maximum plate thickness is 50% of nominal capacity
The cone length may be max. 30% or must be more than 60% of the roll length
Hardened rolls are recommended
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HS 20-220
Pokliči
Stanje: novo, Condition: new
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €46,300
Leasing rate: €884.33
Bending length: 2,050 mm
Max. bending capacity – mild steel: 11 mm
Max. plate thickness without pre-bending at D=5x top roll: 11 mm
Max. plate thickness without pre-bending at D=1.5x top roll: 9 mm
Max. plate thickness with pre-bending at D=5x top roll: 9 mm
Max. plate thickness with pre-bending at D=1.5x top roll: 7 mm
Top roll diameter: 220 mm
Bottom roll diameter: 220 mm
Side roll diameter: 160 mm
Rolling speed: 1.5 / 6 m/min
Motor power: 5.5 kW
Length: 4,400 mm
Width: 1,150 mm
Height: 1,250 mm
Weight: 4,080 kg
4 rolls
Top roll driven by hydraulic motor and planetary gearbox; bottom roll driven by gear and cardan shaft
Hydraulic adjustment of bottom and side rolls
Digital display for bottom and side roll positions
Hsdpfx Adjyb Szuorsfh
Hardened rolls
Cone bending device
Hydraulic top roll release
Hydraulic drop-end bearing
2 working speeds
Overload protection
Mobile control panel
Equipment compliant with CE regulations
OPTIONS:
Infinitely variable roll speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT POINTS FOR CONICAL ROLLING:
Max. plate thickness is 50% of nominal capacity
Cone length must be max. 30% or more than 60% of roll length
Hardened rolls are recommended
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HS 25-245
Pokliči
Stanje: novo, Condition: New
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €52,700
Leasing rate: €996.03
Bending length: 2550 mm
Max. bending capacity – structural steel: 10 mm
Max. sheet thickness without pre-bending at D=5x top roll: 10 mm
Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm
Max. sheet thickness with pre-bending at D=5x top roll: 8 mm
Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm
Top roll diameter: 245 mm
Bottom roll diameter: 245 mm
Side roll diameter: 180 mm
Rolling speed: 1.5 / 6 m/min
Motor power: 7.5 kW
Length: 4800 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6170 kg
4 rollers
Top roll drive via hydraulic motor and planetary gearbox; bottom roll driven via gears and cardan shaft
Hydraulic adjustment of bottom and side rolls
Digital display for position of bottom and side rolls
Hardened rolls
Cone bending device
Hydraulic release of top roll
Hydraulic drop-end bearing
2 working speeds
Overload protection
Mobile control panel
Equipment conforms to CE regulations
OPTIONS:
Hfodpfeyb Syksx Adrsh
Infinitely variable rolling speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT POINTS FOR CONICAL BENDING:
Max. sheet thickness is 50% of the rated capacity
Cone length must be max. 30% or more than 60% of roll length
Hardened rolls are recommended
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HS 20-260
Pokliči
Stanje: novo, Condition: new
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €53,700
Leasing rate: €1,014.93
Bending length: 2,050 mm
Max. bending capacity (mild steel): 16 mm
Max. sheet thickness without prebending at D=5x top roll: 16 mm
Max. sheet thickness without prebending at D=1.5x top roll: 13 mm
Max. sheet thickness with prebending at D=5x top roll: 13 mm
Max. sheet thickness with prebending at D=1.5x top roll: 10 mm
Top roll diameter: 260 mm
Lower roll diameter: 260 mm
Side roll diameter: 200 mm
Rolling speed: 1.5 / 6 m/min
Motor power: 7.5 kW
Length: 4,300 mm
Width: 1,600 mm
Height: 1,550 mm
Weight: 6,100 kg
4 rolls
Top roll drive via hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft
Hydraulic adjustment of lower and side rolls
Digital position display for lower and side rolls
Hardened rolls
Hodjynm Ehopfx Adrefh
Cone bending device
Hydraulic relief for top roll
Hydraulic drop-end bearing
2 working speeds
Overload protection
Mobile control panel
Equipment complies with CE regulations
OPTIONS:
Infinitely variable rolling speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT POINTS FOR CONICAL ROLLING:
The max. sheet thickness is 50% of the rated capacity
The cone length must be max. 30% or more than 60% of the roll length
Hardened rolls are recommended
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HS 30-260
Pokliči
Stanje: novo, Condition: New
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €60,600
Leasing rate: €1,145.34
Bending length: 3,100 mm
Max. bending capacity (mild steel): 10 mm
Max. sheet thickness without pre-bending at D = 5x top roller: 10 mm
Max. sheet thickness without pre-bending at D = 1.5x top roller: 8 mm
Max. sheet thickness with pre-bending at D = 5x top roller: 8 mm
Max. sheet thickness with pre-bending at D = 1.5x top roller: 6 mm
Hfodpeynm D Rjfx Adroh
Top roller diameter: 260 mm
Bottom roller diameter: 260 mm
Side roller diameter: 200 mm
Rolling speed: 1.5 / 6 m/min
Motor power: 7.5 kW
Length: 5,350 mm
Width: 1,600 mm
Height: 1,550 mm
Weight: 7,685 kg
4 rollers
Top roller driven by hydraulic motor and planetary gearbox, bottom rollers driven by gear drive and cardan shaft
Hydraulic adjustment of bottom and side rollers
Digital display for bottom and side roller positions
Hardened rollers
Cone bending device
Hydraulic release of the top roller
Hydraulic drop-end bearing
2 working speeds
Overload protection
Mobile control console
Equipment in accordance with CE regulations
OPTIONS:
Infinitely variable rolling speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT NOTES FOR CONICAL BENDING:
Maximum sheet thickness is 50% of the rated capacity
Cone length must be a maximum of 30% or more than 60% of the roller length
Hardened rollers are recommended
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HS 15-180
Pokliči
Stanje: novo, Condition: new
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €32,480
Leasing rate: €620.37
Bending length: 1,550 mm
Max. bending capacity - structural steel: 9 mm
Max. plate thickness without pre-bending at D=5x upper roll: 9 mm
Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm
Max. plate thickness with pre-bending at D=5x upper roll: 7 mm
Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm
Upper roll diameter: 180 mm
Lower roll diameter: 180 mm
Side roll diameter: 150 mm
Rolling speed: 1.5 / 6 m/min
Motor power: 5.5 kW
Length: 3,900 mm
Width: 1,150 mm
Height: 1,250 mm
Weight: 3,250 kg
4 rolls
Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft
Hydraulic adjustment of lower and side rolls
Digital display for lower and side roll positions
Hardened rolls
Cone bending device
Hydraulic top roll release
Hydraulic drop-end bearing
2 working speeds
Overload protection
Hfedsynmzpopfx Adrsh
Mobile control panel
Equipment according to CE regulations
OPTIONS:
Infinitely variable rolling speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT POINTS FOR CONICAL BENDING:
The maximum plate thickness is 50% of the nominal capacity
The cone length must be a maximum of 30% or more than 60% of the roll length
Hardened rolls are recommended
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HS 20-200
Pokliči
Stanje: novo, Condition: New
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €40,900
Leasing rate: €781.19
Bending length: 2050 mm
Max. bending capacity – mild steel: 10 mm
Max. plate thickness without pre-bending (at D = 5x top roll): 10 mm
Max. plate thickness without pre-bending (at D = 1.5x top roll): 8 mm
Max. plate thickness with pre-bending (at D = 5x top roll): 8 mm
Max. plate thickness with pre-bending (at D = 1.5x top roll): 6 mm
Top roll diameter: 200 – 220 mm
Lower roll diameter: 200 – 220 mm
Side roll diameter: 160 mm
Rolling speed: 1.5 / 6 m/min
Motor power: 5.5 kW
Length: 4400 mm
Width: 1150 mm
Height: 1250 mm
Weight: 3950 kg
4 rolls
Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gears and cardan shaft
Hydraulic adjustment of lower and side rolls
Hfjdpeynmyfofx Adreh
Digital display for lower and side roll positions
Hardened rolls
Cone bending device
Hydraulic top roll release
Hydraulic drop-end bearing
2 working speeds
Overload protection
Mobile control panel
Equipment in accordance with CE regulations
OPTIONS:
Infinitely variable rolling speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT POINTS FOR CONE BENDING:
The max. sheet thickness is 50% of the nominal capacity
The cone length may be a maximum of 30% or must be more than 60% of the roll length
Hardened rolls are recommended
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HS 15-220
Pokliči
Stanje: novo, Condition: new
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €43,550
Leasing rate: €831.81
Bending length: 1,550 mm
Max. bending capacity – mild steel: 12 mm
Max. sheet thickness without pre-bending at D=5x top roller: 12 mm
Max. sheet thickness without pre-bending at D=1.5x top roller: 10 mm
Max. sheet thickness with pre-bending at D=5x top rollers: 10 mm
Max. sheet thickness with pre-bending at D=1.5x top roller: 8 mm
Top roller diameter: 220 mm
Lower roller diameter: 200 mm
Side roller diameter: 160 mm
Rolling speed: 1.5 / 6 m/min
Motor power: 5.5 kW
Length: 3,900 mm
Width: 1,150 mm
Height: 1,250 mm
Weight: 3,600 kg
4-roll design
Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft
Hydraulic adjustment of lower and side rolls
Digital display for lower and side roll positions
Hardened rolls
Conical bending device
Hydraulic top roll lifting
Hydraulic drop-end bearing
2 working speeds
Hfsdeynmx Ijpfx Adrjh
Overload protection
Movable control panel
Equipment according to CE regulations
OPTIONS:
Infinitely variable roll speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT NOTES FOR CONICAL ROLLING:
Max. sheet thickness is 50% of the nominal capacity
The cone length may be max. 30% or must be more than 60% of the roll length
Hardened rolls are recommended
Mali oglas
Hessisch Lichtenau
682 km
Hidravlične nihajne škarje za pločevino, hidravlične pločevinaste škarje, hidravlične plošče-škarje
HERAHSS III
Pokliči
Stanje: rabljeno, Hydraulic Swing Beam Shear HERA Type HSS III
Serial No. 598 Year of manufacture: 1986
Cutting length: 3100 mm
Cutting thickness: 3 mm
Frame throat depth: 200 mm
Blade strokes: 25 strokes/min.
Power supply: 380 Volt, 50 Hz
Motor power: 3 kW
- Motorised backgauge, adjustable to 1070 mm
- Actual value digital display for backgauge
- Cutting gap adjustment
- Cutting length adjustment
- Front side gauge left, 1000 mm
Hfsdpfx Ajq A I Upsdrjh
- 4 sheet support arms, 1000 mm
- Electric foot switch
Space requirement without sheet support arms (L x W x H): 3630 x 2200 x 1600 mm
Weight: approx. 4000 kg
Good condition
Mali oglas
Passau
308 km
Obdelovalni center VISION III-TT-L
ReichenbacherVISION III-TT-L – 5-Achs, 3-Achs, MBG8
Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4480, skupna dolžina: 14.500 mm, skupna širina: 7.800 mm, skupna višina: 3.500 mm, skupna masa: 20.000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-axis, 3-axis, MBG8, 5x SNA
Equipment:
5-axis unit with gimbal-mounted spindle:
Max. speed: 24,000 rpm
Nominal speed: 10,000 rpm
Power in S1*: 15 kW
Max. power in S6: 20 kW
Torque in S1*: 14.5 Nm
Torque in S6: 19 Nm
Nominal voltage: 380 V
Nominal current: 37 A
Nominal frequency: 380 Hz
Speed programmable from 0 – 24,000 rpm, adjustable in 1 rpm increments
Clockwise/counterclockwise rotation programmable
Drive by frequency converter
Maintenance-free
Water-cooled
Hybrid bearing
Automatic spindle stop in emergency stop situation
Orientated stop for tapping
Tool holder:
HSK-F63 hollow shaft taper as per DIN 69893-6
Max. usable tool length from spindle nose: 240 mm
Max. usable tool weight: 6 kg
3-axis unit with vertically mounted spindle:
Hedpfx Adjywzq Sjrefh
Max. speed: 24,000 rpm
Nominal speed: 10,000 rpm
Power in S1*: 15 kW
Max. power in S6: 20 kW
Torque in S1*: 14.5 Nm
Torque in S6: 19 Nm
Nominal voltage: 380 V
Nominal current: 37 A
Nominal frequency: 380 Hz
Speed programmable from 0 – 24,000 rpm, adjustable in 1 rpm increments
Clockwise/counterclockwise rotation programmable
Drive by frequency converter
Maintenance-free
Water-cooled
Hybrid bearing
Automatic spindle stop in emergency stop situation
Orientated stop for tapping
Tool holder:
HSK-F63 hollow shaft taper as per DIN 69893-6
Max. usable tool length from spindle nose: 240 mm
Max. usable tool weight: 6 kg
8-spindle drilling unit (1 pc):
L-shape, Grotefeld
Drilling spindles: individually selectable
Rotation direction: clockwise/counterclockwise
Hole pitch: 32 mm
Power: 2.5 kW
Speed: fixed at 5,000 rpm
Z +75
Mount: D = 10 mm H7
Feed stroke: 80 mm
Grooving unit (5 pcs):
GROTEFELD angle saw unit F100-S
Working/milling stroke pneumatically actuated.
Drive: three-phase motor with Poly-V belt
LEFT-hand design
Drive rotation direction: clockwise/counterclockwise
Speed ratio: 1:2.86 – belt drive
Power: 2.20 kW – 220-240/380-415 V – 50 Hz
Speed: n1 = 2,800 rpm n2 = 8,011 rpm at 50Hz
Spindle power: 2.2 kW
Feed rate: 150 mm
Tool holder: ø30 x 1.5 mm – 5.0 mm
Tool holder rotation: counter to drive rotation
Feed force: 2,565 N
Underfloor drilling unit in machine bed (1 pc):
GROTEFELD angle milling head G06-1.1-P
Working/drilling stroke pneumatic.
Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz
Drive rotation: right
Speed ratio: 1:1.55 gear drive
Drive speed: 2,800 – 5,600 rpm
Tool spindle speed: 4,340 – 8,680 rpm
Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°)
for collet chuck ER25 DIN 6499-B, ø0.5–16 mm max.
Tool holder rotation: right
Flange clamp: FK45
Feed slide: with pneumatic cylinder, dual steel shafts
Feed: 80 mm
Mali oglas
Nemčija
650 km
CNC lesnoobdelovalni center
Hamuel ReichenbacherVision III-TT-L-5-Achs
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, A CNC multi-spindle woodworking center by Reichenbacher with automatic support table and vacuum pods is available. Travel range X1/X2: 8540mm, travel range Y1: 2500mm, travel range Z1: 480mm, B-axis swivel: 180°, C-axis swivel: 360°, X3-axis: subfloor drilling unit, U2-U10: support movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, rotation speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of supports: 9, vacuum pods per support: 8, vacuum pod diameter: 100mm, support positioning: +/-1000mm, min. support spacing: 300mm, total number of vacuum pods: 72, vacuum pod stroke: 100mm, usable vacuum pod stroke: 25mm, tool changer positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensions X/Y: approx. 15000mm/8000mm, weight: approx. 20000kg. Documentation available. On-site inspection possible. Expected to be available from the end of September 2025.
Hfjdpfxsw Azuze Adreh
Mali oglas
Plettenberg
768 km
Hidravlične giljotinske škarje
HERAHSS III
Pokliči
Leto izdelave: 1988, stanje: rabljeno, Sheet width 1500 mm
Sheet thickness 3 mm
Machine weight approx. 4 t
Hodpfjlp U Txjx Adrjfh
Space requirement approx. WxDxH 2000x1500x1800 mm
Motorized back gauge
Mali oglas
Niederlangen
930 km
Hidravlične giljotinske škarje
HERAHSS III / 3100 x 2,0
Pokliči
Stanje: rabljeno, Leto izdelave: 1978, Sheet width: 3100 mm
Sheet thickness: 2 mm
Backgauge: 1000 mm
Cutting angle: 1°06’
Strokes per minute: 45 spm
Total power requirement: 3.0 kW
Space requirements (approx.): 3600 x 2200 x 1600 mm
Weight: 4500 kg
Equipment:
- Electrically powered backgauge
- With digital ELGO position display
- Manual blade gap adjustment
- 1x side gauge with mm scale
- 2x support arms
- 1x free-moving double foot pedal
- Front finger guard
Hfjdsuagxpjpfx Adreh
Special accessories included:
- Pneumatic sheet support device for cutting thin sheet metal
Mali oglas
Nemčija
840 km
Hidravlične giljotinske škarje
HERAHSS III / 2600 x 5,0
Pokliči
Stanje: rabljeno, Leto izdelave: 1981, Širina pločevine: 2600 mm
Debelina pločevine: 5 mm
Zadnji prislon: 1000 mm
Kot reza: 1°06’
Število hodov: 45 hodov/min
Napetost: 380 V / 50 Hz
Skupna zahtevana moč: 5,5 kW
Teža: 4500 kg
Potrebni prostor cca: 3600 x 2200 x 1600 mm
Oprema:
Hfjdpfxexuv Hyo Adrjh
- električno-motorizirani zadnji prislon
- ročna nastavitev reže reza
- 2 naslona
- nožni pedal
- rezervni nož
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HSS 25-350
Pokliči
Stanje: novo, Condition: New
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €103,100
Leasing rate: €1,948.59
Bending length: 2550 mm
Max. bending capacity – structural steel: 25 mm
Max. sheet thickness without prebending at D=5x top roll: 25 mm
Hjdpfoynm Eujx Adrjfh
Max. sheet thickness without prebending at D=1.5x top roll: 20 mm
Max. sheet thickness with prebending at D=5x top roll: 20 mm
Max. sheet thickness with prebending at D=1.5x top roll: 16 mm
Top roll diameter: 350 mm
Bottom roll diameter: 350 mm
Side roll diameter: 260 mm
Rolling speed: 1.5–5 m/min
Motor power: 22 kW
Length: 5500 mm
Width: 2000 mm
Height: 1900 mm
Weight: 13,000 kg
4 rolls
Fully hydraulic drive of top and bottom rolls
Hydraulic adjustment of bottom and side rolls
Digital display for lower and side roll positions
Hardened rolls
Cone bending device
Hydraulic release of top roll
Hydraulic drop-end bearing
2 working speeds
Central lubrication
Overload protection
Movable control panel
Equipment according to CE regulations
OPTIONS:
Infinitely adjustable rolling speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT NOTES FOR CONICAL BENDING:
The maximum sheet thickness is 50% of the nominal capacity
The cone length may be max. 30% or must be more than 60% of the roll length
Hardened rolls are recommended
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HSS 20-350
Pokliči
Stanje: novo, Condition: New
Delivery time: approx. 12 weeks from order
Country of origin: Turkey
Price: €97,400
Lease rate: €1,840.86
Bending length: 2,050 mm
Max. bending capacity (mild steel): 30 mm
Max. plate thickness without pre-bending at D=5x upper roll: 30 mm
Max. plate thickness without pre-bending at D=1.5x upper roll: 25 mm
Max. plate thickness with pre-bending at D=5x upper roll: 25 mm
Max. plate thickness with pre-bending at D=1.5x upper roll: 20 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Side roll diameter: 260 mm
Rolling speed: 1.5–5 m/min
Motor power: 22 kW
Length: 5,000 mm
Width: 2,000 mm
Height: 1,900 mm
Weight: 11,000 kg
4 rolls
Fully hydraulic drive of upper and lower rolls
Hydraulic adjustment of lower and side rolls
Digital display for lower and side roll positions
Hardened rolls
Conical bending device
Hydraulic top roll release
Hydraulic drop-end bearing
2 working speeds
Centralized lubrication
Overload protection
Hfsdpfxoynm Enj Adreh
Mobile control panel
Equipment according to CE regulations
OPTIONS:
Infinitely variable rolling speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT NOTES ON CONICAL ROLLING:
The max. plate thickness is 50% of the rated capacity
The cone length may be a maximum of 30% or must be at least 60% of the roll length
Hardened rolls are recommended
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HSS 30-350
Pokliči
Stanje: novo, Condition: New
Delivery time: approx. 10 weeks from order
Country of origin: Turkey
Price: €111,500
Leasing rate: €2,107.35
Bending length: 3,100 mm
Max. bending capacity – mild steel: 20 mm
Max. plate thickness without pre-bending (D=5x top roll): 20 mm
Max. plate thickness without pre-bending (D=1.5x top roll): 16 mm
Max. plate thickness with pre-bending (D=5x top roll): 16 mm
Hsdpfx Adeynm Eborjfh
Max. plate thickness with pre-bending (D=1.5x top roll): 12 mm
Top roll diameter: 350 mm
Lower roll diameter: 350 mm
Side roll diameter: 260 mm
Rolling speed: 1.5–5 m/min
Motor power: 22 kW
Length: 6,000 mm
Width: 2,200 mm
Height: 1,900 mm
Weight: 15,000 kg
4-roll design
Full hydraulic drive of top and bottom rolls
Hydraulic adjustment of lower and side rolls
Digital readout for lower and side roll positions
Hardened rolls
Conical bending device
Hydraulic release of the top roll
Hydraulic drop-end bearing
2 working speeds
Centralized lubrication
Overload protection
Mobile control panel
Equipment according to CE regulations
OPTIONS:
Infinitely variable rolling speed
Hydraulic side support
Hydraulic top support
NC control
IMPORTANT POINTS FOR CONICAL BENDING:
The maximum plate thickness is 50% of the nominal capacity
The cone length must be a maximum of 30% or more than 60% of the roll length
Hardened rolls are recommended
Mali oglas
Avstrija
237 km
Valjčna stiskalnica za pločevino
HESSE by SAHINLER4R HSS 20-280
Pokliči
Stanje: novo, Condition: New
Delivery time: approx. 12 weeks from order
Country of origin: Turkey
Price: €73,200
Leasing rate: €1,383.48
Bending length: 2,050 mm
Max. bending capacity – mild steel: 20 mm
Max. sheet thickness without prebending at D=5x upper roll: 20 mm
Max. sheet thickness without prebending at D=1.5x upper roll: 16 mm
Hodpfxeynmyle Adrefh
Max. sheet thickness with prebending at D=5x upper roll: 16 mm
Max. sheet thickness with prebending at D=1.5x upper roll: 12 mm
Upper roll diameter: 280 mm
Lower roll diameter: 280 mm
Side roll diameter: 220 mm
Rolling speed: 1.5 / 5 m/min
Motor power: 16.5 kW
Length: 4,350 mm
Width: 1,700 mm
Height: 1,850 mm
Weight: 8,550 kg
4 rolls
Fully hydraulic drive for upper and lower rolls
Hydraulic adjustment of lower and side rolls
Digital display for lower and side roll positions
Hardened rolls
Cone bending device
Hydraulic release of upper roll
Hydraulic drop-end bearing
2 working speeds
Centralized lubrication
Overload protection
Mobile control panel
Equipment according to CE regulations
OPTIONS (PRICES ON REQUEST):
Steplessly variable rolling speed
Hydraulic side support
Hydraulic top support
NC control system
IMPORTANT NOTES ON CONICAL BENDING:
The max. sheet thickness is 50% of the nominal capacity
The cone length must be max. 30% or more than 60% of the roll length
Hardened rolls are recommended
Olajšamo vam iskanje: "hess hydromat hs iii"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec











































































































































