Hebrock Stroj Za Rezkanje Robov nakup rabljenega (93.008)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Dodpfxjr A Eq Rj Afljwa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, skupna dolžina: 3.950 mm, skupna širina: 1.220 mm, skupna višina: 1.610 mm, skupna masa: 1.900 kg, Fully automatic large-format edge polishing machine with CNC control and swiveling milling/polishing unit for finishing cut or pre-milled surfaces. The machine is suitable for transparent, technical, or decorative plastics (PMMA, PC, PETG, etc.) as well as for processing composite materials (PMMA with paper or aluminum). The required process parameters can be conveniently selected via the integrated material library, based on the material to be processed and the desired surface finish. Tool recommendations and the required tooling setup for the specific process are also displayed. The high precision of the polishing table minimizes streak formation during processing. Additional mounting points for side stops or further guiding aids allow for flexible adaptation to any product. Key features: - CNC control with material library - Machine base and front stop - Milling/polishing unit - Working area - Multifunction table - Tools Technical Data*: Material thickness (0°/45°/60°): 2 – 120/85/60 mm Material length: 20 – 3,050 mm (With pass-through) up to 6,100 mm Table width: 525 mm Swivel range: 0° – +63° Milling depth (0°/45°/60°): 0.05 – 1.5/3/3 mm Motor speed: 6,000 – 12,000 rpm Feed speed: 0.1 – 5 m/min Return speed: 50 m/min Number of clamping cylinders: 6 (optionally up to 20) Number of side stops: 1 (optionally up to 8) Extraction port Ø: 100 mm Machine length: 3,950 mm Machine width: 1,220 mm Machine height: 1,610 mm Working height: 926 mm Compressed air supply: 6 bar Operating voltage: 400 V, 50 Hz, +PE +N Milling motor power: 4.5 kW Drive motor power: 1.2 kW Total power: 7.5 kW Weight: 1,900 kg Tool type: EURACRYL ES with quick-change system Vacuum table: Included Remote maintenance: Included Tool holder: Included (1x tool holder for 4 cutting edges) Tool: Not included *Subject to material tests, depending on material type, tooling setup, and surface finish Dsdpfx Afoxd Si Asljwa Scope of delivery: - 1 operating manual Item no. 0175200

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter – max. 400 mm Number of teeth – max. 150 Module – max. 5 Total power requirement: 16 kW Machine weight approx. 10 t Djdpfx Aot Hwylsflewa PRÄWEMA CNC Gear Edge Milling Machine using Continuous Hobbing Process For chamfering external and internal gears on sliding sleeves, synchronizer rings, clutch hubs, starter pinions, spur gears, etc. Type SynchroForm W 2 - 1 Year of manufacture: 1991 Machine no. 05610 Workpiece diameter min./max.: 30 – 400 mm Number of teeth: 6 – 150 Maximum module: 5 Tool holder / shank Ø: SK 30 / 20 mm Tool speed / spindle power max. continuous: 4,000 rpm or 1.8 kW Feed rates transverse & longitudinal: 0.001–12 m/min Max. workpiece rotation speed (1.5 kW) - C axis: 2,000 rpm Total drive: approx. 16 kW – 380 V – 50 Hz Weight: approx. 10,000 kg Accessories / Special Equipment: • BWO (HECKLER & KOCH) CNC control Type 785 H for up to 7 axes with screen input and all necessary monitoring and fault diagnosis systems for fully automatic operation • Two milling spindle units (left and right), adjustable in all necessary angular positions, CNC-controlled: Z and W axes = tool cross slide / X and U axes = tool longitudinal slide, L and O axis = milling spindle, C axis = workpiece spindle rotation. Manually controlled: Tool slide rotary table (B and E axis), tool slide vertical adjustment (V and Y axis), tool head tilt (A and D axis), each with ROD for digital position indication in the control. • Hydraulically actuated workpiece clamping device in conjunction with loading automation via workpiece feeder/conveyor belt and swing loader, as well as air system monitoring for the workpiece. • Coolant unit with chip conveyor, soundproof enclosure, central lubrication, built-in hydraulic system, pneumatically operated safety doors, deburring device, etc. The machine operates on the hobbing principle with electronically synchronized tool and workpiece axes for machining both symmetrical and asymmetrical straight chamfer shapes. Characterized by high productivity and precision. Condition: good to very good – soon ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further machines for processing transmission components are always in stock. Please inquire about your requirements with us.

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter - max. 0 mm Number of teeth - max. 0 Module - max. Module - min. Total power requirement kW Machine weight approx. t Space requirement approx. m Dwedot Hwv Hjpfx Aflja CNC-controlled synchronizer ring milling machine ideal for synchronizer rings, BWO control 785 H

Leto izdelave: 1975, stanje: rabljeno, Wheel Diameter – max. 280 mm Number of Teeth – max. 100 Module – max. 6 Module – min. 1 Total Power Requirement: 6 kW Machine Weight: approx. 2,500 kg Space Requirement: approx. __ m H U R T H Automatic Gear Edge Milling Machine for universal use in deburring and chamfering gears Model: ZK 7 - Year of Manufacture: 1975 Serial No.: 26 000 _____ Max. Workpiece Diameter: approx. 280 mm Workpiece Length: approx. 200 mm Module Range for Deburring: 1-6 module for Simplified Shifting: 1-4 module Workpiece Tooth Count: 6 - 100 Workpiece Spindle Bore: 102 mm Horizontal Adjustment of Workpiece Head: approx. 340 mm Vertical Adjustment of Milling Slide: 180 mm Dodpfx Afst Hw Dkjlswa Swiveling Range of Milling Slide: 105° Traverse Adjustment of Milling Slide: approx. 300 mm Cutter Speeds: 250-2,800 rpm Cutter Stroke Rates: 30–210/min Adjustable Cutter Stroke: 6–12 mm Milling Spindle Taper: 40 SK Total Drive: approx. 6 kW – 380 V – 50 Hz * Weight: approx. 2,500 kg Accessories / Special Equipment: • Electric workpiece clamping device with collet chuck setup, facility for expanding mandrels, and standard workpiece holder, extensive clamping devices included. Foot switch for clamp release. • Mechanical indexing device for tooth numbers, with approx. 20 different indexing plates • Adjustable tooth gap-centering device mounted on the workpiece head • Mechanical collet adapter installed on the tool head for various cutter diameters and types (profile/face/bell cutters, etc.), approx. 50 various used and new cutters included. • Hydraulic working stroke of tool spindle towards the workpiece, with integrated hydraulic unit. • Workpiece counter Condition: Good – demonstration-ready, very interesting due to extensive accessories. Delivery: ex stock – as inspected * Payment: strictly net – upon receipt of invoice We look forward to your order. Approximately 100 different gear cutting machines are still available in stock for selection. Please inquire with us.

Stanje: zelo dobro (rabljeno), SCM Praktika in excellent condition Dwsdpfx Ajt Hkq Rjfloa

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: 0-260-06-0228, Foot control 1200 x 800 mm Extraction nozzle 80 mm Pneumatic connection Cable + 16 A plug 1 set of operating tools 1 set of measuring rollers Dodpfoigadljx Aflswa

Leto izdelave: 1998, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Edge milling machine, manufacturer: IMAC Year of manufacture: 1998 Model: CB 18 Series: B20 Dodpszfwh Tjfx Afljwa

Stanje: dober (rabljeno), Leto izdelave: 2000, Stroj za rezkanje robov, naprava za rezkanje robov, posnemalec robov, mobilni rezkalni stroj, oblikovalec varilnih robov, naprava za pripravo varilnih robov, stroj za oblikovanje varilnih robov, naprava za odstranjevanje ostružkov, stroj za odstranjevanje ostružkov -Stroj za rezkanje robov: z nastavljivo hitrostjo vrtenja -Nastavitev globine: 0 - 7 mm -Pogon: 0,75 kW -Nastavljivo število obratov: 0 - 6000 obr/min -Kot: 45° -Pribor: glava za rezkanje Widia Dwedpfxsy Rt Aae Afloa -Dimenzije: 650/560/H1190 mm -Teža: 94 kg

Leto izdelave: 2003, stanje: rabljeno, Tehnični podatki: Teža stroja pribl.: 8,5 t Dwedpfezbbx Aex Afloa Wera VA 240-R stroj za rezkanje robov zobnikov Uporaba: izdelava sinhronega zobčenja, posnemanje robov sinhronega zobčenja in odstranjevanje srha Vložni in izložni trak Letnik proizvodnje: 2003 Krmiljenje 840 D PL Mere vključno z vložnim in izložnim trakom: 4,8m x 2,4m x 2,4m

Stanje: rabljeno, Technical details: electric version - voltage/frequency: 380 V/Hz Total power requirement: 1.1 kW Machine weight approx.: 18 kg Dimensions L x W x H: 0.32 x 0.50 x 0.25 m Dwjdpfx Aeu Nggnsflsa EDGE CHAMFERING MACHINE, benchtop unit Application: chamfering, deburring Equipped with milling head Ø 65 mm with carbide inserts Motor speed 2,780 rpm Workpiece holding via 45° prism, with 2 supports (L x W: 500 x 40 mm), rotatable 15° - 45° Maximum chamfer width: 5.0 mm, angle 15° - 45°

Stanje: rabljeno, Technical details: Height above floor: 930 mm Machine weight approx.: 75 kg (+ 27 kg base frame) Dimensions (L x W x H): 0.6 x 0.48 x 0.43 m EDGE BEVELING MACHINE Dedpfx Afsu Ngdtslswa Application: For beveling Machine table (W x D): 600 x 240 mm with guide rail (L x H): 400 x 25 mm Installed tool: Cutter approx. 50 mm with 45° milling profile Bevel width: approx. 6 mm Voltage: 380 V with ON/OFF switch

Stanje: rabljeno, Technical Details: Voltage: 380 V Total power requirement: 4.0 kW Approx. machine weight: 1,270 kg Dimensions (L x W x H): 1.4 x 1.0 x 1.9 m Application: Beveling of discs and flat material - Smallest straight edge = 3 mm - Max. material tensile strength = 70 kp/mm (690 N/mm²) Dedju Ngfdepfx Aflowa - Max. feed speed: at 10 mm bevel width = 3.1 m/min at 15 mm bevel width = 2.9 m/min at 20 mm bevel width = 2.7 m/min at 25 mm bevel width = 1.5 m/min With bevel angle adjustment (bevel angle) 25° - 55° Scale for adjusting the straight edge Manual pressure hold-down with handwheel Cutting wheel size Ø 200 mm; gearing: fine / medium / coarse Support stand size: D: 220 x W: 620 x H: 350 mm; driving roller approx. Ø 350 x 100 mm; display via linear scale

Stanje: skoraj kot novo (rabljeno), Edge milling machine for deburring/chamfering various internal and external contours. Chamfer size adjustable up to max. 10 mm at 45°. 45° cutter / 8 cutting edges, double row – KIF/MF. Suitable for steel, light metals, stainless steel, cast iron, and non-ferrous metals. Includes 21 packs of 10 indexable inserts X11.30.35.45 P25 BS TiCN each Includes 7 packs of 10 clamping screws for X11.30.35.45 Available at extra cost: 1 milling head 30° Dodpjtwcn Refx Afljwa 1 milling head 35° 1 milling head 45° 1 milling head 60° Ex works, plus VAT.

Stanje: dober (rabljeno), Leto izdelave: 2003, I am selling a HEBROCK HFF08 edge radius milling machine for moulded parts, year of manufacture 2003. Suitable for curved elements. Good condition, can be inspected! Dodpowun H Uefx Aflewa It is also possible to purchase the edge banding machine AKV 088D.

Stanje: rabljeno, Leto izdelave: 2012, skupna višina: 1.600 mm, skupna dolžina: 5.250 mm, skupna širina: 1.440 mm, Machine à placage de chants HEBROCK AKV 3006 DK FS Épaisseur de chant maximale : 3/8 mm Dedpfewnhb Sex Aflowa Épaisseur minimale/maximale de la pièce : 10/40 mm Longueur minimale de la pièce : env. 200 mm Largeur minimale de la pièce : env. 80 mm Vitesse d'avance : env. 10 m/min Prête en env. 6 minutes. Puissance maximale absorbée : 12 kW Raccordement électrique : 400 V / 3 Ph / 50 Hz Pré-fraisage Unité d’encollage Rouleau de pression Scie à recouper Unité de fraisage Unité de fraisage Arrondisseur d’angles Racloir à rayon Racloir plat Unité de nettoyage Dimensions (L x l x h) : 5250 x 1445 x 1600 mm, Poids : 1550 kg - Année de construction : 2012 - Documentation disponible : Non - Certificat CE disponible : Non - Dimensions de transport : 5250mm x 1445mm x 1600mm (L x l x h) Informations financières : TVA : Le prix indiqué s'entend hors TVA TVA/régime de la marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Yorick Diebels

Leto izdelave: 2005, stanje: dober (rabljeno), številka stroja/vozila: 412060, Offer 23001 Technical Specifications: - Chamfer width: 1 – 15 mm - Cutter head with indexable inserts - Chamfer angles: 30° – 37.5° – 45° – 60° - Drive: 220 V / 1100 Watts - Required space approx.: W 450 x D 300 x H 350 mm Dedpsi Ab Unsfx Afljwa - Weight approx.: 20 kg - Transport case

Stanje: novo, Leto izdelave: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Dedpfxog Tu Rke Aflowa Weight: approx. 1700 kg Whispercut jointer head Corner rounding unit (radius R = 2 mm) Quick-change device for corner rounding unit Corner rounding change motor (radius EF R = 1 mm) Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spraying Nesting function Pneumatic 3-point adjustment Multi-function milling cutter (R2/R1/chamfer) Equipment for short workpieces

Stanje: novo, Leto izdelave: 2026, Maks. debelina roba: 3 mm Min/Maks. debelina obdelovanca: 8 - 50 mm Min. dolžina obdelovanca: ca. 160 mm Pripravljenost za obratovanje: ca. 3,5 min. Teža: ca. 900 kg Maks. priključna moč: Ø ca. 7,4 kW Priključek za odsesavanje: Ø 1 x 140 mm Električni priklop: 400 V - 3 faze - 50 Hz Višina delovne mize: ca. 900 mm Podajalna hitrost: ca. 10 m/min Dimenzije stroja: ca. 4.300 x 1.300 x 1.400 mm (D x Š x V) Kombinirana rezkalna glava Dwodpshymgdefx Aflja Radijusni rezkar R=2 mm Rezkanje kotnih robov R=2 mm Radijusno vlečno rezilo R=2 mm Sprejni sistem za rob Pnevmatska 3-točkovna nastavitev (radialno, fazno, poravnano rezkanje)

Stanje: novo, Aceti Edge Milling Machine Art.61 A stable, robust edge milling machine for machining visible and welding edges. Bevel size adjustment via handwheel and scale. Table is hardened, with 500 mm clamping length. Axial adjustment of the milling table for full utilization of the ISO/DIN indexable inserts. Suitable for all materials, including plastics, by using different indexable inserts. Standard equipment: - Milling head fully equipped with 10 ISO indexable inserts - Hardened, axially adjustable guides - Bevel adjustment via handwheel with locking mechanism - Angle adjustment via circular guide 15-45° - Table design with 4 rubber feet Technical data: Dwjdpfeiwxwtjx Afloa Motor: 400V 1.1 kW Speed: 2800 rpm Milling table: 500 x 100 mm Cutter: 80 mm Bevel: 0 – 6 mm Angle: 15 – 45° Weight: 35 kg Incl. 10 pcs. SPUN 1203 indexable inserts

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, cutting motor, spindle motor, milling motor -Manufacturer: Peske, milling motor type VS 31.09-4 -Power: 0.37 kW, 8540 rpm at 300 Hz -Voltage: 165 volts -Mount: Collet chuck -Tool: Ø 8 mm -Quantity: 2 motors available -Price: per unit -Dimensions: 260/60/H140 mm / 255/60/H155 mm Dwedpfjb A Tcwox Aflea -Weight: 3.5 kg each

Stanje: rabljeno, Double-end tenoner, edge processing machine, scoring motor, cutting motor, milling motor, spindle motor - Manufacturer: Perske, milling motor type DVMS 903/2 - Power: 0.4 kW, 12,000 rpm at 200 Hz - Voltage: 133 volts - Shaft interface: Ø 30 x 32 mm - Tool: Ø 70 x 20 mm / indexable insert milling cutter Dsdpemdygijfx Aflswa - Quantity: 1 unit available - Dimensions: 250/59/H140 mm - Weight: 3.8 kg

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor, spindle motor - Manufacturer: Perske, milling motor type KN 71.14/2 with mounting bracket - Power: 3 kW 2880 rpm - Voltage: 380 V / 50 Hz - Shaft mount: Ø 30 x 70 mm - Tool: max. Ø 440 mm - Dimensions: 700/570/H480 mm - Weight: 100 kg Dwjdpfx Afjpyk Nbjlsa

Stanje: dober (rabljeno), Double-end profiler, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor - Manufacturer: Haffner, Milling motor type M 30 - Power: 300 W 17,000 rpm Dodpfx Aeku Hrreflowa - Voltage: 200 V 300 Hz - Dimensions: 240/70/90 mm - Weight: 2.5 kg

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, machining motor, milling motor, spindle motor - Power: 0.4 kW, 12,000 rpm at 200 Hz - Voltage: 133 volts - Mounting shaft: Ø 20 mm - Tool: Ø 70 x 20 mm Djdpob A Tctefx Afljwa - with indexable insert milling cutter - Quantity: 1 unit available - Dimensions: 285/60/H170 mm - Weight: 5 kg