Harald Baumgarten/Sema Systemtechnik Tm 400S nakup rabljenega (18.328)

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Na voljo je celotna linija za ločno rezanje. Dolžina izdelka: 750 mm–1400 mm, premer izdelka: 75 mm/100 mm, največji upogib pri 1400 mm: 10 mm, toleranca pri 75 mm: +/-5 mm, toleranca pri 100 mm: +/-9 mm, obratovalne ure: 20653 h. Komponente linije: 1) Rezkalnik Harald Baumgarten. 2) Paketni podajalnik Sema Systemtechnik. 3) Naprava za lomljenje palic. 4) Pogon in merilna postaja za vrtenje palic. 5) Tehtalna postaja z razvrščanjem odrezkov. 6) Odsesovalna in filtrirna naprava. 7) Zvočno izolirana kabina z varovalnim ograjenim območjem. 8) Štiristebrna preša Winter. 9) Hidravlična enota s črpalkami. 10) Krmilna omara in upravljalna konzola. Dokumentacija je na voljo. Ogled na kraju možen. Predvidoma na voljo od maja 2026. Gujdpfxoyu T Eno Ac Heg

Leto izdelave: 2015, stanje: skoraj kot novo (rabljeno), KOMBI-PAKKER I RUSTFRIT STÅL Multipack Guodpfx Aceh Hq U Uo Heg Producent: Sema Systemtechnik Maskinemodel: 1400s-FN-TPW Produktionsår: 09/2015 Fremstillet i komplet rustfrit stål Maskinen har ikke været brugt i lang tid, fremstår som næsten ny!

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small components. Due to its compact design, the system is highly practical and can be used anywhere. The device is very easy to operate even without programming skills. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optionally: 20 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis Gjdpfx Acjzpwlmo Hsug - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 140 kg, skupna dolžina: 900 mm, skupna širina: 800 mm, skupna višina: 2.000 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of lasers has become indispensable in many industries. The powerful laser software enables the creation of text, numbers, 2D codes, QR codes, and logos with just a few clicks and little programming knowledge. The software automatically increments serial and article numbers as preset. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically insert them into predefined fields. Using a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optional larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal light for operating status display • Max. workpiece height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm Gusdpfx Asxuvk Esc Heg • Connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 120 kg

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-0243-B400 AC servo motor SN:C064G7066 z A860-2000-T301 Pulsecoderjem, strokovno popolnoma obnovljen in testiran z 12-mesečno garancijo, 100 % funkcionalen, obseg dobave v skladu s fotografijami. Za ta artikel dogovorjeni popusti ne veljajo. Za ceno prosim povprašajte posebej! Guodpfx Ajltryyjc Hsg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 350 mm, skupna širina: 605 mm, skupna višina: 1.080 mm, vhodna napetost: 230 V, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 70 mm, širina območja skeniranja: 70 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged using a quick-change system. Its mobile base allows it to be conveniently moved to the workpieces to be marked. This makes it suitable for both large and heavy as well as small workpieces. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after the initial setup. Additionally, it can read data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. Using a handheld scanner is also possible. Made in Germany • Fiber laser 20W (optional: 30 Watt, 50 Watt) • Laser class 1 • CE compliant, according to EU regulations • Wavelength 1064nm Gsdpfx Asznr Umec Heug • Marking field size 70x70mm (optional: 110x110mm) • Status signal light (integrated in handheld unit) • Marking software EZCAD • Connection 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 45 kg • Weight of portable laser unit (handpiece): 2.8 kg • Fiber optic cable: approx. 2.50 m • Integrated extraction system

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 600 mm, skupna širina: 400 mm, skupna višina: 690 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small parts. Thanks to its compact design, the unit is highly practical and can be used anywhere. The device is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created and marked with just a few clicks and minimal programming knowledge. The software automatically increments serial and article numbers after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. A laptop with Windows operating system and laser software is included as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 watt (optional: 30 watt, 50 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-trap safety stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts Gjdpfsy Emthox Ac Houg - Welded steel sheet construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 100 kg, skupna višina: 1.660 mm, Leto izdelave: 2026, vhodna napetost: 230 V, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, Laser for Product Marking – The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, laser technology has become indispensable for durable marking. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software increases serial and article numbers automatically after initial setup. Furthermore, the software can extract data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Standard equipment includes a laptop with a holder and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, are also available. Gedpfx Aezpwmdec Hjug Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – system for automatic focus distance determination • Signal tower for operating status display • Marking software EZCAD (optional additional laser software) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (work level adjustment) • Frame made of aluminum profile • 230V connection • Air cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660 mm (L x W x H) • Weight: approx. 80 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 350 mm, skupna širina: 605 mm, skupna višina: 1.080 mm, vhodna napetost: 230 V, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 70 mm, širina območja skeniranja: 70 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged using a quick-change system. Its mobile base allows it to be conveniently moved to the workpieces to be marked. This makes it suitable for both large and heavy as well as small workpieces. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after the initial setup. Additionally, it can read data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. Using a handheld scanner is also possible. Made in Germany • Fiber laser 20W (optional: 30 Watt, 50 Watt) • Laser class 1 • CE compliant, according to EU regulations • Wavelength 1064nm • Marking field size 70x70mm (optional: 110x110mm) • Status signal light (integrated in handheld unit) • Marking software EZCAD • Connection 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 45 kg • Weight of portable laser unit (handpiece): 2.8 kg • Fiber optic cable: approx. 2.50 m Guodpfxszxcfko Ac Hsg • Integrated extraction system

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts or, for example, nameplates. Thanks to its compact design, the system is highly practical and can be used anywhere. Guedpsznr Srsfx Ac Hog The device is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without the need for extensive programming expertise. Serial and article numbers can be automatically incremented by the software after a simple initial setup. Furthermore, the software can import data (variable information such as drawing numbers, project names, etc.) directly from existing tables and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 Watt (optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking area size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-pinch protection - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Power supply 230V - Air cooled - Laptop with Windows operating system (German or English) - Dimensions: W x D x H 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 560 kg, skupna dolžina: 1.870 mm, skupna širina: 1.040 mm, skupna višina: 1.550 mm, priključek za stisnjen zrak: 6 letvica, natančnost pozicioniranja: 0,01 mm, natančnost ponavljanja: 0,01 mm, največja hitrost vrtenja: 60.000 obr/min, vrsta vhodnega toka: trifazni, Polavtomatsko razrezovanje uporab – Osnovni stroj s paralelnim preklopnikom Guedoznr Slepfx Ac Hog Dinamični uporabni rezalnik LOW 4322 je posebej primeren za srednje do velike količine izdelkov in izpolnjuje naraščajoče zahteve v proizvodnem procesu. Uporabne plošče iz različnih materialov se s pomočjo žaginih in rezkalnih tehnik z malo prahu in napetosti razrezujejo z najvišjo produktivno prilagodljivostjo, natančnostjo in zmogljivostjo. Visoko dinamične linearne motorske osi, orodja in prijemala izpolnjujejo najvišje standarde kakovosti, s čimer zagotavljajo dolgo življenjsko dobo in zanesljivost rezalnika. Izdelano v Nemčiji Polavtomatsko razrezovanje uporab – rešitve po meri Uporabni rezalnik LOW 4322 omogoča hitro menjavo izdelkov ob hkratnem ohranjanju kratkih časov rezanja in rokovanja. Vstavljanje uporabnih tiskanih vezij poteka s paralelnim preklopnikom, prijem in pritrditev s tehnologijo zatičnega vpenjanja, po potrebi v kombinaciji z vakuumskimi priseski. Stroj je opremljen z: • Grednim in kolutnim orodnim razrezovalnim modulom na Z-osi (samodejno vrtljiv 0–90°) • X-Y križni vbodni modul v tehnologiji linearnega motorja z visoko ločljivim merilnim sistemom • Dvojni nakladalni modul, izdelan kot paralelni preklopnik, ločeno levo in desno s pomičnimi vrati • Okvir iz aluminijastih profilov z dvema servisnima vratoma – levo in desno • Osnovni modul standardnega vision sistema za Teach-In programiranje (kamera 400 × 330 mm) • Delovno območje 420 × 330 mm • Samodejna obdelava dolžine rezkarjev (samo v kombinaciji z modulom za gredni rez) • Oddaljeno vzdrževanje/podpora preko oddaljene povezave (TeamViewer) ali s strani stranke • Touch IPC z operacijskim sistemom Windows • Lasersko merjenje osi z dokumentacijo • Ionizacija zraka • Kontrola loma rezkarjev samo za gredne rezkarje • Priprava na vakuumsko vpenjalno tehniko • ESD-zaščitno steklo in drsna vrata Opcijsko je mogoče naknadno ponuditi tudi enoto za odsesavanje prahu. Visoka zmogljivost rezalnika z vgrajenim žaginim ali rezkalnim modulom, polavtomatsko obdelavo dolžine rezkarja, slikovno podprtim Teach-In kamerami in dvema enostavno naloženima napravama za tiskanine se lahko razširi z veliko prilagodljivimi rešitvami in dodatno opremo (npr. vision sistem). Natančna laserska meritev osi pred zagonom je pri vseh linijskih in samostojnih uporabniških sistemih Systemtechnik Hölzer del individualne storitve za stranke.

Leto izdelave: 2010, stanje: rabljeno, Natančen nadzor nivoja za zaznavanje premajhne ali prevelike napolnjenosti steklenic. Stroj (dodatna oprema): Nadzor višine polnila P maks.: 10 bar Tok: 8 A Napetost: 230 V Frekvenca: 50/60 Hz Dolžina: 1,2 m Širina: 0,93 m Gsdpfx Acoztzcds Hjug Višina: 2,2 m Oprema: Zaznavanje višine polnila in zaprtosti, vključno s pihanjem zraka v ustje steklenice pred polnjenjem in odvajanjem s pomočjo zbirne mize. Teža: 350 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Gjdpfx Acjdwktke Houg Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Godpfx Acjgl Nlme Hjug Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 60 mm, skupna višina: 1.660 mm, skupna dolžina: 80 mm, skupna masa: 80 kg, The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, laser usage is essential in many industries. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no extensive programming knowledge needed. Serial and article numbers are automatically incremented by the software after initial setup. Additionally, the software can read data (such as part numbers, project names, etc.) from existing tables and transfer them automatically to predefined fields. The use of a hand scanner is also supported. Standard equipment includes a laptop with a mounting bracket and Windows operating system. Optionally, the LAS 28 can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, are also available. Made in Germany • Fiber laser 30W (optional 20 or 50 watts) • Wavelength 1064nm • Marking field size: 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) Gjdpsunh Hrefx Ac Hsug • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Signal lamp for operating status indication • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminum profile • 230V power connection • Air-cooled • Laptop with Windows OS • Dimensions: 800x600x1660mm (LxWxH) • Weight: approx. 80 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 900 mm, skupna širina: 1.550 mm, skupna višina: 1.900 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, Laser za označevanje izdelkov – univerzalno uporabni laserski sistem za označevanje LAS 28 XLe podjetja Systemtechnik Hölzer GmbH je primeren za širok spekter različnih vrst označevanj. Z vgrajenim vlakenskim laserjem lahko označujete skoraj vse materiale, kot so jeklo, trda kovina, aluminij in plastika. Guedpfxeunh H Ss Ac Hsg Glede na zahteve lahko sistem opremite s 20, 30 ali 50-vatnim vlakenskim laserjem. Za trajno označevanje je uporaba laserja v številnih panogah nujna. Z zmogljivo lasersko programsko opremo lahko ustvarjate besedila, številke, 2D-kode, QR-kode in logotipe brez obsežnega znanja programiranja, in to le z nekaj kliki. Programska oprema samodejno šteje serijske in artikel številke po predhodni nastavitvi. Poleg tega lahko programska oprema prebere podatke (spreminjajoče se informacije, kot so številke risb, imena projektov itd.) iz obstoječih tabel in jih samodejno prenese v predhodno določena območja. Uporaba ročnega skenerja je prav tako možna. Standardna oprema vključuje vgrajen računalnik z operacijskim sistemom Windows in lasersko programsko opremo. Po želji lahko laserski model LAS 28 XLe opremite z rotacijsko osjo (3-čeljustna vpenjalna glava) za označevanje cilindričnih delov. Na voljo so tudi druge možnosti, kot so stranski podaljški za označevanje dolgih delov, premikalna os Z, sistemi za predale itd. Izdelano v Nemčiji Vlakenski laser 30 W, 20 W ali 50 W • Laserski razred 1 • Valovna dolžina 1064 nm • Velikost označevalnega polja 150 x 150 mm (po želji večje) • Programska oprema za označevanje EZCAD v nemščini/angleščini • po želji: rotacijska os (3-čeljustna vpenjalna glava) • po želji: digitalni sistem za merjenje višine • po želji: sesalni sistem (vključno z aktivnim ogljikom filtrom) • po želji: samodejni sistem za ostrenje – sistem za samodejno določanje razdalje žariščne točke • Pilotni laser (enostaven predogled, predogled konture) • Žariščni iskalnik (enostavna nastavitev žarišča) • Signalna luč za prikaz delovnega stanja • največja višina obdelovanca približno 300 mm • Električno nastavljiva os Z • Vgrajen računalnik z operacijskim sistemom Windows • IPS PCAP zaslon na dotik in opora za tipkovnico, nastavljiva po višini • Okvir iz aluminijastega profila • Hlajeno z zrakom • Izjemno velik notranji prostor • Širina vrat približno 700 mm / višina vrat (dovodni odprtini): 400 mm • Priključek 230 V • Mere: približno 900 x 800 x 1900 mm (D x Š x V) • Teža: približno 120 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LAS 23, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with custom-made attachments that can be individually swapped out using a quick-change system. Thanks to its mobile underframe, it can be wheeled directly to the workpieces to be marked. This makes it suitable for both large and heavy as well as small workpieces. The fume extraction system is integrated into the device. The powerful laser software enables easy marking of texts, numbers, 2D codes, QR codes, and logos with just a few clicks and no extensive programming knowledge. The software can automatically increment serial and article numbers after pre-configuration. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also supported. Made in Germany Gsdpfx Acsu Smd Ss Hsug • Fiber laser 30W (optional: 20W, 50W) • Laser class 1 • Wavelength 1064nm • Marking field size 70x70mm (larger sizes optional) • EZCAD marking software in German/English • Pilot laser (simple preview, plain text preview) • Laptop with mount included, featuring Windows OS • Aluminium profile construction • 230V connection including cable reel • Air-cooled • Dimensions: approx. 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of the portable laser unit approx. 2.8 kg • Integrated extraction system

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 14 kg, skupna širina: 245 mm, skupna dolžina: 420 mm, skupna višina: 450 mm, vhodna napetost: 230 V, raven hrupa: 59 dB, trajanje garancije: 12 meseci, volumenski pretok: 420 m³/h, Oprema: Na voljo je tipska ploščica, šasija, Fume extraction unit with remote control and extraction hose Air inlet interface øm flange Gsdpfx Acjxt Dq Re Houg Max. power 300W Air velocity 24 m/s Filtration efficiency 0.3 µm / 99.97% Noise level

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 1.550 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, skupna masa: 120 kg, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, potrebna širina: 1.550 mm, potrebna višina: 2.100 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, Univerzalni laserski sistem za označevanje LAS 28 XLe podjetja Systemtechnik Hölzer GmbH je primeren za širok nabor različnih vrst označevanj. Z integriranim vlakenskim laserjem lahko označujete skoraj vse materiale, kot so jeklo, trdi kovinski material, aluminij in plastika. Odvisno od zahtev je mogoče sistem opremiti z vlakenskim laserjem moči 20, 30 ali 50 W. Za trajno označevanje je uporaba laserja v mnogih panogah danes nujna. Z zmogljivo lasersko programsko opremo lahko ustvarjate besedila, številke, 2D-kode, QR-kode in logotipe brez obsežnega znanja programiranja, in to z le nekaj kliki. Programska oprema samodejno generira serijske in artikel številke po predhodni nastavitvi. Poleg tega lahko programska oprema prebere podatke (variabilne informacije, kot so številke risb, imena projektov itd.) iz obstoječih tabel in jih samodejno prenese v predhodno določene območja. Uporaba ročnega skenerja je prav tako možna. Standardna oprema vključuje integriran osebni računalnik z operacijskim sistemom Windows in lasersko programsko opremo. Po želji je mogoče laserski model LAS 28 XLe opremiti z rotacijsko osjo (3-čeljustna vpenjalna glava) za označevanje cilindričnih delov. Na voljo so tudi druge možnosti, kot so stranski nosilci za označevanje dolgih delov, premakljiva os Z, sistemi predalov itd. Izdelano v Nemčiji Vlakenski laser 30 W (po želji 20 W ali 50 W) • Razred laserja 1 • Valovna dolžina 1064 nm • Velikost območja označevanja 150 x 150 mm (po želji večje) • Signalna luč za prikaz delovnega stanja • po želji: rotacijska os (3-čeljustna vpenjalna glava) • po želji: sistem za odsesavanje (vključno z filtrom iz aktivnega oglja) • po želji: digitalni sistem za merjenje višine • po želji: samodejni sistem za ostrenje za samodejno določanje razdalje do goriščne točke • Programska oprema za označevanje EZCAD v nemščini/angleščini (druga programska oprema na zahtevo) • Pilotni laser (enostaven predogled, predogled v čisti obliki) • Iskalnik goriščne točke (enostavna nastavitev goriščne točke) • maks. višina obdelovanca pribl. 300 mm • Električno nastavljiva os Z • Integriran osebni računalnik z operacijskim sistemom Windows • IPS PCAP zaslon na dotik in naslon za tipkovnico, nastavljiv po višini Godewlc Stopfx Ac Hjug • Okvir iz aluminijastega profila • Hlajen s zrakom • Izjemno velik notranji prostor • Širina vrat pribl. 700 mm / višina vrat (prehod): pribl. 400 mm • Priključek 230 V • Dimenzije: pribl. 900 x 800 x 1900 mm (D x Š x V) z nosilcem za zaslon pribl. 1500 x 800 x 1900 mm (D x Š x V) • Teža: pribl. 120 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts or, for example, nameplates. Thanks to its compact design, the system is highly practical and can be used anywhere. The device is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without the need for extensive programming expertise. Serial and article numbers can be automatically incremented by the software after a simple initial setup. Furthermore, the software can import data (variable information such as drawing numbers, project names, etc.) directly from existing tables and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 Watt (optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking area size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis Gjdpfx Acsw Et Ile Hsug - Electric door with anti-pinch protection - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Power supply 230V - Air cooled - Laptop with Windows operating system (German or English) - Dimensions: W x D x H 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.064 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 1.500 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, delovno območje: 600 mm, skupna masa: 120 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, dolžina mize: 600 mm, širina mize: 600 mm, potrebna širina: 1.550 mm, potrebna višina: 2.100 mm, valovna dolžina laserja: 1.064 nm, delovna višina: 950 mm, vhodna frekvenca: 50 Hz, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking tasks. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, even without extensive programming knowledge. The software can automatically increment serial and item numbers upon initial configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to defined fields. Using a hand scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, motorized Z-axis, and drawer systems, are also available. Made in Germany Fiber Laser 30 Watt • Laser class 1 • Wavelength 1064 nm • Marking field size 150x150 mm • Signal light for operating status display • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (incl. activated carbon filter) • Marking software EZCAD in German / English (other software available on request) • Pilot laser (simple preview, plain text preview) • Focus finder (easy focus adjustment) • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (L x W x H) with monitor mount approx. 1500 x 800 x 1900 mm (L x W x H) Guodpfx Aey T Ixnec Heg • Weight: approx. 120 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, skupna masa: 150 kg, skupna višina: 2.300 mm, skupna dolžina: 1.200 mm, skupna širina: 600 mm, nosilnost na stojalo: 5 kg, delovno območje: 400 mm, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped Guedexrgkwspfx Ac Hsg • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 14 kg, trajanje garancije: 12 meseci, vhodna napetost: 230 V, skupna dolžina: 420 mm, skupna višina: 450 mm, skupna širina: 245 mm, volumenski pretok: 420 m³/h, Oprema: nizka raven hrupa, šasija, Fume extraction unit with remote control and extraction hose Air inlet interface øm flange Gedpfxoxrgl Ie Ac Heug Max. power 300W Air velocity 24 m/s Filtration efficiency 0.3 µm / 99.97% Noise level

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 100 kg, skupna dolžina: 800 mm, skupna širina: 600 mm, skupna višina: 1.660 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta laserja: vlakenski laser, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. Godpfev Sybyox Ac Houg The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers once configured. In addition, the software is capable of reading data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transferring them into predefined sections. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mount and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral extensions for marking long workpieces, are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – system for automatic determination of focus distance • Signal lamp to indicate operating status • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height approx. 270mm • Electrically adjustable Z-axis (work surface adjustment) • Frame made of aluminum profile • Connection 230V • Air cooled • Laptop with Windows OS • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, Univerzalno lasersko označevalno sistema LAS 28 XLe podjetja Systemtechnik Hölzer GmbH je primerno za širok spekter označevanj. Z vgrajenim vlakenskim laserjem lahko označujete skoraj vse materiale, kot so jeklo, trda zlitina, aluminij in plastika. Odvisno od zahtev lahko sistem opremite z 20, 30 ali 50-vatnim vlakenskim laserjem. Za trajno označevanje je uporaba laserja v mnogih panogah danes nujna. Z zmogljivo lasersko programsko opremo lahko besedila, številke, 2D-kode, kode QR in logotipe ustvarite z nekaj kliki, pri čemer ni potrebno veliko znanja programiranja. Programska oprema samodejno šteje serijske in artikel številke po predhodni nastavitvi. Poleg tega lahko programska oprema prebere podatke (spreminjajoče se informacije, kot so številke risb, imena projektov itd.) iz obstoječih tabel in jih samodejno prenese v predhodno določena območja. Možna je tudi uporaba ročnega skenerja. Standardna oprema vključuje vgrajen osebni računalnik z operacijskim sistemom Windows in lasersko programsko opremo. Po želji lahko laserski model LAS 28 XLe opremite z vrtilno osjo (3-čeljustna glava) za označevanje cilindričnih delov. Na voljo so tudi druge možnosti, kot so stranski nosilci za označevanje dolgih delov, premikajoča se Z-os, sistemi predalov itd. Možne so tudi programirljive osi, ki jih upravlja programska oprema (osi X, Y, Z), kot tudi povezava z bazo podatkov. Izdelano v Nemčiji Vlakenski laser: 30 W, 20 W ali 50 W • Razred laserja: 1 • Valovna dolžina: 1064 nm • Velikost označevalnega polja: 150 x 150 mm (po želji večje) • Programska oprema za označevanje: EZCAD (v nemščini/angleščini) • Po želji: Vrtilna os (3-čeljustna glava) • Po želji: Digitalni sistem za merjenje višine • Po želji: Odsesavanje (vključno z aktivnim ogljičnim filtrom) • Po želji: Sistem za samodejno ostrenje - sistem za samodejno določanje razdalje do žariščne točke • Po želji: Programirljivi osi X, Y in Z (upravljane s programsko opremo) • Pilotni laser (enostaven predogled, predogled konture) • Iskalnik žariščne točke (enostavna nastavitev žariščne točke) • Semaforski signal za prikaz delovnega stanja • Maksimalna višina obdelovanca: približno 300 mm Godpowkpvvjfx Ac Hjug • Električno nastavljiva Z-os • Vgrajen osebni računalnik z operacijskim sistemom Windows • Nastavljiva višina stojala za zaslon in tipkovnico • Okvir iz aluminijastega profila • Hladjenje z zrakom • Izredno velik notranji prostor • Širina vrat: približno 700 mm / višina vrat (odprtina): 400 mm • Priključna napetost: 230 V • Dimenzije: približno 900 x 800 x 1900 mm (D x Š x V) • Teža: približno 120 kg