Gsg Gmbh & Co. Kg Stroj Za Odstranjevanje Oblog Z Žično Krtačo nakup rabljenega (131.675)

Leto izdelave: 2003, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 03234, Stroj za odstranjevanje oksida s 6 krtačami (3 pari) za jekleno žico premera 5,5–16,0 mm (nizkoogljično jeklo). Pari krtač so razporejeni s 60-stopinjskim zamikom za maksimalen učinek. Zelo čist in urejen stroj. Priporočamo ogled in pregled na lokaciji. Podpfx Ajx R Uzdoa Dopt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Ppsdpou Tha Iefx Aa Djt Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Leto izdelave: 2015, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, SURFACE GANTRIES AND AUTOMATED INSERTING UNIT FOR METAL SHEET INLAYS This system is part of a larger production line; please also refer to our other listings for more information. The offered system includes 3 provisioning stations for cover layers, an automated adhesive application machine for sandwich bonding, a lay-up conveyor for the manual assembly of the inlay/ribbing, surface gantries for the handling of cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): Ppedpfx Aasyt Nm Se Djt GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING PORTAL FOR CONTOUR & SURFACE APPLICATION (of cover layers & inlays): Number of needle valves for surfaces: 104 Number of needle valves for contour: 1 Adhesive system: 1C-PUR Number of nozzles for water spray unit: 8 ANCILLARY UNITS: Climatic chamber (storage for 1C-PUR adhesive) Vacuum pump for surface gantries Punching unit

Stanje: rabljeno, Leto izdelave: 2002, Tehnične podrobnosti: Ppodpfoxc E Icsx Aa Det Maks. premer kolesa: 40-200 mm Skupna potrebna moč: 31,3 kW Teža stroja pribl.: 4 t Potreben prostor pribl.: 1,8 x 2,2 x 1,8 m

Stanje: dober (rabljeno), Leto izdelave: 1982, Wheel diameter – max. 600 mm Wheel width – 500 mm Module – max. 15 Module – min. 1 Total power requirement – 2 kW Machine weight – approx. 2 t Space requirement – approx. 2 x 1.5 x 2 m The gear tooth rounding process is achieved by the combination of the cutter’s changeover movement and the continuous rotation of the workpiece. The alternating movement of the cutter is accomplished via the rotation of a specially shaped cam that produces either a radius or edge rounding. A set of four cams allows machining of modules ranging from 1 to 16. An adjustment mechanism enables changing between minimum and maximum module values for each individual cam. The rotation of the workpiece is controlled by a three-step gearwheel system that functions as the dividing mechanism. Workpiece locking and rapid positioning of the cutter towards the workpiece are controlled by pneumatic servomechanisms. The practicality and speed of the equipment, along with the wide selection of profiles available on the cams and the capability to process internal gears, make this machine a universal tool suited to both small and large batch production. --> Technical specifications Max. module: 15 Max. diameter: 600 mm Spindle/head rotational speeds: 1450 – 2100 – 2800 rpm Production capacity (teeth per minute): 35 – 50 – 75 Spindle motor output: 2800 rpm – 1.5 HP Ppodewftuxepfx Aa Dst Workpiece rotation motor output (self-braking): 1.5 HP Automatic system motor output (self-braking): 0.35 HP Cooling system motor output: 0.25 HP Dimensions: 2000 x 1500 mm Total weight: 2000 kg Accessories: - 5x Cams - Dividing gears - Tools - Serial No. 152/0589/94 - Machine with full enclosure - Counterholder

Stanje: rabljeno, Premer kolesa – maks. 300 mm Širina kolesa 200 mm Modul – maks. 12 Modul – min. 0,5 Skupna potrebna moč 2 kW Teža stroja pribl. 1 t Potrebni prostor pribl. 0,8 x 1,2 x 1,5 m Ppjdpjxu Nttsfx Aa Det

Stanje: rabljeno, Deburring brush machine, tube deburring machine ERINI Type 250 Year of manufacture: approx. 1995 Brush diameter: 250 mm Pjdpepu R Ngofx Aa Dspt Brush width: 25 - 60 mm Speed: 1500 / 3000 rpm Power: 2.2 / 2.8 kW Power supply: 380 Volt, 50 Hz - Material support - new deburring brush - Extraction connection Ø 100 mm Dimensions (L x W x H): 620 x 500 x 1150 mm Weight: 100 kg In good condition

Stanje: rabljeno, Stroj za odstranjevanje iglic s krtačo, verjetno BAUER Letnik: cca 1985 Premer krtače: 250 / 300 mm Pedpfxsxrgupo Aa Dopt Širina krtače: 20 - 60 mm Hitrost vrtenja: 1500 / 3000 obr./min. Moč: cca 2 / 3 kW Priključitev na omrežje: 380 V, 50 Hz - s podnožjem mize Dimenzije (D x Š x V): 700 x 600 x 1250 mm Teža: 120 kg Dobro ohranjeno

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 25392, Ponudba 25392 Pedoygk Ttopfx Aa Djpt Tehnični podatki: - 2 delovni postaji za notranjo in zunanjo obdelavo - Notranje in zunanje posnemanje robov do 4 mm - 2 delovni hitrosti 100 + 200 1/min - 2 vpenjalna vretena MK 3 - Pogon 400 V / 1,1 / 1,3 kW - Potrebni prostor pribl. Š 500 x G 550 x V 700 mm - Teža pribl. 70 kg - Delovna miza z 1 predalom in vrati: Š 1300 x G 840 x V 900 mm - Teža pribl. 150 kg

Stanje: rabljeno, Stroj za odstranjevanje robov s ščetko, stroj za odstranjevanje robov s cevi RSA tip STL 1 Letnik: cca 1990 Premer ščetke: 250 mm Širina ščetke: 25 - 60 mm Število obratov: 1430 / 2870 obr/min Moč: 2 / 3 kW Priključek električnega omrežja: 380 V, 50 Hz - Podpora za material - Priključek za odsesavanje Ø 75 mm Mere D x Š x V: 650 x 550 x 440 mm Teža: 100 kg Ppjdpfx Aoxpqy Rja Djt Dobro ohranjeno

Stanje: rabljeno, Električni verižni dvig, elektro dvigalo, žerjav STAHL tip R 12 Tovarniška št.: 3437532 Leto izdelave: 1979 Nosilnost: 1250 kg Premik kljuke: 2,4 metra Hitrost dviga pri eni verigi: 8 m/min Fina hitrost dviga pri eni verigi: 2 m/min Hitrost dviga pri dveh verigah: 4 m/min Fina hitrost dviga pri dveh verigah: 1 m/min 2 verigi = 1250 kg Moč motorja: 1,25 / 0,25 kW Priključek: 380 V, 50 Hz - brez verižne vreče Pedpfx Aodz Sp Isa Dspt - Voziček za KBK 2 - dvonosilni mostni žerjav Voziček brez 4 KBK koles V dobrem stanju

Leto izdelave: 1963, stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 512804, 1963 Bobst SP900E met dubbelwerkende stripper in redelijke/goede staat. Goed onderhouden; de afgelopen jaren zijn onder andere de tandwielen, hoofdgrijperkettingen, tegenplaat onder de snijplaat en cardankoppelingen naar de aanvoerkop vernieuwd (originele Bobst onderdelen). De grijperbalken zijn de laatste tijd niet vervangen, maar verkeren nog in goede staat. De kniegewrichten vertonen vrijwel geen slijtage; deze zijn vermoedelijk eerder vervangen en de machine is daarna weinig gebruikt. Er zitten nauwelijks krassen op. Podpfx Aotyqizoa Dspt De machine is gedemonteerd opgeslagen in ons magazijn in Zuid-Nederland; dus momenteel niet aangesloten op stroom. Bij serieuze interesse van een potentiële koper zullen wij de machine verder opwaarderen, assembleren en de mogelijkheid bieden deze naar wens uitvoerig te testen. In dat geval bedraagt de prijs 22.000 euro, geladen op uw transportmiddel, EX WORKS.

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ščetkalični in sortirni stroj / Univerzalni stroj s ščetkami Ppedpfexrlgqox Aa Dot Proizvajalec: Leif Lorentz / Universal Finishing Systems Tip: B 4 1000 Univerzalna uporaba kot sortirna enota, za odpraševanje in čiščenje obdelovancev ali za brušenje Letnik izdelave: 2005 Delovna širina: 800 mm Širina traku: cca 850 mm Prehodna višina: cca 60 mm 2 ščetkalni enoti od zgoraj, vsaka 1,1 kW, brezstopenjska regulacija hitrosti, 350-900 obr./min Opremeljeno s ščetinami kot na voljo. Dimenzije stroja: cca 2400 x 1300 x 1700 mm

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 6034, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 450 mm, pomik po osi Z: 590 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 25 m/min, hitri pomik na osi Z: 25 m/min, nazivna (navidezna) moč: 45 kVA, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: Bahnsteuerung iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 12.500 mm, skupna širina: 4.810 mm, skupna masa: 14.000 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 12.000 obr/min, obratovalni tlak: 7 letvica, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN contouring control iTNC 530 • 4 axes • Travel paths X / Y / Z axes: 7200 / 450 / 590 mm • Working area X / Y / Z axes: 7000 / 400 / 350 mm • Weight: 14 t Equipment - Robust base structure as a welded frame construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X-axis (50 m/min) by rack-and-pinion drive - Y/Z axes (25 m/min) by ball screw drive - B-axis 9,000°/min - Swiveling operator panel - Automatic central lubrication - Traveling tool changer for 12 tool holders SK 40 - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar Ppjdpfx Ajyzxfnoa Det - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 – 25 – 25 m/min - Infinitely variable feed: 0 – 5,000 mm/min - Tool change: disc changer with 12 tool stations SK 40 - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 liters - Spindle speed: 100 – 12,000 rpm - Speed correction: 80 – 120% - Drilling capacity in St 60 / Al: up to 28 mm Ø - Thread cutting capacity in St 60 / Al: up to M24 - Position measuring system: rotary encoder/length measuring system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel paths X / Y / Z axes: 7,200 / 450 / 590 mm - Working area X / Y / Z axes: 7,000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB (A)

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 10,2 m³/h, vhodna napetost: 230 V, 2018 Pompa próżniowa RZ 9 Nr seryjny: 100018206 Pjdpfxew Rqx Ds Aa Djpt Wydajność nominalna: 10,20 Typ: RZ 9 Podłączenie elektryczne: 230 Dane techniczne Maks. wydajność pompowania przy 50 Hz (mbar): 8,9 m3/h Maks. wydajność pompowania przy 60 Hz (cfm): 6,0 cfm Próżnia końcowa: 2 x 10⁻³ mbar / 1,5 x 10⁻³ torr Próżnia końcowa z balastem gazowym: 1 x 10⁻² mbar / 0,75 x 10⁻² torr Próżnia częściowa bez balastu gazowego: 4 x 10⁻⁴ mbar / 3 x 10⁻⁴ torr Tolerancja pary wodnej: 40 mbar / 30 torr Liczba stopni: 2 Dopuszczalny zakres temperatur otoczenia (praca): 15 – 40°C Dopuszczalny zakres temperatur otoczenia (magazynowanie): -10 – 60°C Maks. ciśnienie na wyjściu (absolutne): 1,1 bar Pojemność oleju min./maks.: 0,45 / 0,85 l Przyłącze wlotowe: mały kołnierz KF DN 25 Przyłącze wylotowe: mały kołnierz KF DN 25 Moc znamionowa silnika: 0,30 kW Prędkość znamionowa 50/60 Hz: 1500/1800 min⁻¹ Klasa ochrony IEC 60529: IP 40 Wymiary (D x S x W): 503 mm x 156 mm x 240 mm Waga: 24,8 kg Poziom hałasu (ciśnienie akustyczne) w dBA przy 50 Hz lub 1500 obr./min (62%): 52 dBA Certyfikat NRTL – brak

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10044/0218, Podrobne fotografije in specifikacije izdelka so na voljo v priloženi PDF datoteki. Ppjdpfx Aajy S Sz Re Djt Stružnice so posebej zasnovane za obdelavo poročnih prstanov in zapestnic. Ločitev notranje in zunanje obdelave na dva stroja zagotavlja visoko produktivnost. Vse potrebne stružne operacije (ravnanje, radiji, bočna obdelava in posnemanje robov) je možno izvajati zaporedno, brez potrebe po prilagoditvah ali predelavah strojev. Tehnični podatki: Parameter Vrednost Pogon 0,55 kW z električno zavoro Napajanje 380 V / 50 Hz Regulacija obratov potenciometer Razpon obratov 0–1400 vrt/min Dimenzije 100 × 70 × 130 cm Teža 170–190 kg

Leto izdelave: 2006, obratovalne ure: 5.840 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6398921, Prosimo, navedite svojo ponudbeno ceno. Prodaja samo znotraj Evrope, vključno s Turčijo. ----- Ppodpfoy Ta Aljx Aa Dot Tehnični podatki so navedeni v priloženem dokumentu. Brez embalaže; Če želite napravo razstaviti sami, prosimo, navedite to v vaši ponudbi. Za pravilnost tehničnih podatkov, popolnost pribora in orodij ter za izpolnjevanje vseh varnostnih in okoljskih zahtev, navedenih v predpisih za preprečevanje nezgod, ne prevzemamo nobene odgovornosti. Vsaka garancija je izključena.

Stanje: novo, Leto izdelave: 2026, Enostavno vzdrževalna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predsobo s prizmatičnim ločevalnikom, v osnovi sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 2.16.B250 za 30.000 m³/h (na voljo tudi druge velikosti) Ppjdpfjw Ivqmjx Aa Djt Sestavljen iz stabilnega, vakuumsko neprepustnega 3 mm jeklenega ohišja, razdeljenega na surovi plinski prostor s filtrskimi kartušami, filtrsko predsobo s prizmatičnim ločevalnikom in čistim plinskim prostorom s čiščenjem filtra z uporabo stisnjenega zraka, vsak z ločenimi servisnimi vrati Easy Open. Lijak za zbiranje prahu z režnim ventilom ali zvezdastim dozatorjem za odstranjevanje prahu z Big Bag vrečami. Krmiljenje magnetnega ventila z indikatorjem diferenčnega tlaka za optimalno nastavitev čiščenja filtrov. Servisna vrata kot nihajna vrata – enostavno vzdrževanje.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Psdpou Ey Dljfx Aa Djpt Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2026, Shot blasting booth components: flat conveyor floor, cross screw conveyor, bucket elevator, air separator, screen, abrasive bunker, blasting machine, filter unit, fan, air ducts, lamella extraction wall, blast feed box, electrical control system supplied as a kit without installation. Alternatively, the system components can also be installed on your premises by our professional technicians. Psdpfx Ajhc T Nlja Dspt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Podpfeyz Af Esx Aa Dept Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, tlak (maks.): 250 letvica, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for demanding geometries to right- or left-hand bending. The plug-in bending tools enable quick changeovers to different tube sizes. Fast hydraulics to reduce downtimes is a key factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store a virtually unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In "Simple Bending", the length and rotation of each bend relative to each other are displayed automatically. In "Controlled Bending" mode, the data is stored beforehand, and during the bending process, a continuous target/actual comparison is performed. As a result, mispositioning within a tolerance window is ruled out and user-related error rates are minimized. General error messages are shown in full text on the large screen. The mandrel retraction is programmable and can automatically retract early when the bending angle is reached. The compact drive unit with detachable mandrel holder offers benefits for installation on site as well as for special designs with large tube feed, and is also available as a stationary version with a tool and mandrel rod organizer. The cost-effective alternative to a fully controlled CNC machine. POTENTIAL APPLICATIONS: • Hydraulic tubing installation • Pipeline construction Ppodpfx Aeng Exaoa Det • Plant construction, e.g. for chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity: Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunction machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Maximum bending angle: 180° • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot pedal OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic braking function or manual stops operated by foot pedal • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Pipe calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touchscreen with integrated pipe calculation • Bending radii up to 250 mm • Data transfer by cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demonstration room • Consulting and information session at your site • Consultation and processing of leasing/financing purchases through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance for your machine

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. Pjdpfx Aajnh R Eks Dspt TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, minimalni polmer upogibanja: 9 mm, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance Psdpfxsndn Ags Aa Djpt

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta aktuacije: električni, Premer cevi (maks.): 35 mm, Debelina stene cevi (maks.): 2 mm, Kot upogiba (maks.): 360 °, radij upogibanja (maks.): 150 mm, minimalni polmer upogibanja: 32 mm, skupna masa: 28 kg, trajanje garancije: 12 meseci, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping Ppsdpfx Asnfvx Nja Dst • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location