Grecon 2004 nakup rabljenega (1.077)

Stanje: dober (rabljeno), Leto izdelave: 1992, I am selling an automatic pneumatic cross-cut saw, GreCon Dimter 2004, year of manufacture 1992. Kdodpot Ir Nqefx Abxjn Automatic infeed table / through-feed system Outfeed table 3 ejectors on the left outfeed table Total length: 15.50 m Optimization with automatic defect detection and automatic cut pattern programming. Available immediately. Spare parts and documentation included.

Stanje: zelo dobro (rabljeno), GreCon Type 2004 Optimizing Cross-Cut Saw Kodpfx Aon Hwl Ajbxodn with infeed cross conveyor with outfeed conveyor belt featuring 4 ejectors with chain bed Technical Specifications: Max. workpiece width: 250 mm Max. workpiece thickness: 80 mm Saw blade diameter: 450 mm Cutting speed: 90 m/sec. Saw motor: 5.5 kW Saw shaft control: pneumatic Chain drive: servo motor Min. working width: 40 mm Min. infeed length: 500 mm Net weight: approx. 1,800 kg Was completely overhauled and then not used again Location: Austria, near Ried im Innkreis

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Optimizator Grecon Dimter Opticut S50 Maksimalna vhodna dolžina materiala: 5000 mm Minimalna/maksimalna širina lesa: 20-300 mm Minimalna/maksimalna debelina lesa: 10-100 mm Možnost rezanja paketov Izrezovanje napak v materialu Kdjdpozaug Refx Abxsn CE certifikat

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Kjdpowtgcxjfx Abxjdn Rated power: 11 kW Fusing: 25 A Condition: used

Stanje: rabljeno, Rezkalno vreteno Vretena za rezkalnike za zatiče Stroj za rezkanje žlebičev z lastovičjim repom različne dolžine različni modeli na zalogi v spletni trgovini www jöma Ksdsqwgrpepfx Abxjdn Proizvajalci: GreCon, Sauter, DIMTER

Stanje: zelo dobro (rabljeno), skupna dolžina: 3.000 mm, skupna širina: 1.500 mm, Stiskalnica za plošče v zelo dobrem delovnem stanju + finger jointing Grecon Kjdpfx Abet Uduxsxodn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Linija za spajanje lesa GRECON ULTRA TT Leto izdelave: 2006 Kedozcuv Ropfx Abxodn Stroj je opremljen s podrezovalnimi enotami za lepljenje na ravno ali vzdolž žleba, kar omogoča univerzalno uporabo – lahko lepi elemente v cikcak spoju ali na ravno. Tehnični podatki: Mere stroja: - Dolžina: 15.000 mm - Širina: 6.000 mm - Višina: 2.100 mm Dimenzije lepljenega materiala: - Širina: min. 40 mm – maks. 205 mm - Debelina: min. 20 mm – maks. 80 mm - Dolžina: min. 150 mm – maks. 1.000 mm - Dolžina stiskanja: min. 3.000 mm – maks. 6.100 mm Napajanje: - Nazivna napetost: 400V - Poraba moči: 43,5 kW - Priključna varovalka: 100A Stroj je sestavljen iz naslednjih sklopov: 1. Nakladalni trak 2. Avtomatska vrtljiva miza 3. Miza za rezkanje 4. Rezkalni stroj 5. Vhodna postaja 6. Stiskalnica 7. Izhod iz stiskalnice Stroj je popolnoma delujoč in v dobrem stanju.

Stanje: pripravljen za uporabo (rabljen), - Pralna za zlepljanje z zobatimi utori (Keilzinkenanlage) - Naprava za spojevanje furnirnih paketov s prsti - Vhodna dolžina lesa ... 800-5400 mm (opcija 600-6000 mm) - Širina lesa ..... 70 - 255 mm - Debelina lesa ..... 22 - 100 mm - Končna dolžina lesa .... neomejena - Stiskalna sila 12 t (opcija stiskalnica za 30 t) Sestavljeno iz: - dvojni valjčni transporter - avtomatska žaga s prepoznavo črt (15 kW) - pakiranje - avtomatski centralni rezkar (80 kW) - prečni sortirni transporter - valjčna proga - hidravlična stiskalnica z intervalnim delovanjem (20 kW) - čelilna žaga (5 kW) - elektro omara s Siemens S5 krmiljenjem, leto 1996 OPCIJE - glejte PDF v prilogi Kedpjbqqzgsfx Abxjdn OPCIJE za zelo velike preseke lesa: 01 - Stiskalnica s silo 30 t 02 - Avtomatska čelilna žaga DIMTER - XXL s prepoznavo črt (23 kW) druge možnosti so možne

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Linija obratuje še do sredine julija. Linija je sestavljena iz rentgenske naprave (GreCon), prečne krožne žage (GreCon), linije za paketiranje, avtomatskega stroja za rezkanje čelnih spojev, prečnega transporterja in preše za čelni spoj (vse GreCon). Preša za čelni spoj, leto 2004, tip TP 12-25 Zmogljivost: Pri povprečni dolžini desk 3,74 m je zmogljivost v 8 urah približno 10.000 tm smreke Pri povprečni dolžini desk 2,43 m je zmogljivost v 8 urah približno 7.000 tm macesna Širine desk: 90 mm/160 mm in 110 mm Min.: debelina 17 mm, širina 70 mm Maks.: debelina 90 mm, širina 270 mm Kodjy N Uu Ispfx Abxjdn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Tehnični podatki: Kdjdpfxey N D A Ue Abxon Dolžina lesene obdelovanca: 150–700 mm Širina lesa: 40–150 mm Debelina lesa: 20–50 mm Dolžina stiskalnice: 6100 mm Pritisna sila: 120 kN/12 t Moč rezkalne vretena: 15 kW Moč sekalnika: 5,5 kW Sistem nanosa lepila: Flankenjet / Lepljiva šoba Učinkovitost: Čepilni stroj – 2 paketa na minuto Stiskalnica – 2 takta na minuto

Stanje: skoraj kot novo (rabljeno), Spare parts + accessories Dimter + GreCon + REX + Kupfermühle + Cook Bolinders Various items in stock for planing machines and finger jointing lines: Kodpfx Abslifbdsxsdn Kupfermühle Rex Cook Bolinders Dimter GreCon Just inquire.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Avtomatski kapovalni stroj za odstranjevanje napak Levi stroj Prepoznavanje označb Podmizna kapovalna žaga Prerezi lesa glej diagram rezanja Največja širina lesa: 300 mm Največja debelina lesa: 90 mm Žaga 7,5 kW Podajanje 6,9 kW Uporabljano 1995 - 2012 približno 4 ure/dan Opcijsko: Kjdpjkv Untofx Abxedn Predelava PC krmiljenja na Siemens S7 z zaslonom na dotik

Stanje: rabljeno, Leto izdelave: 2007, No. 3177 Kodpfsu Atmusx Abxsdn Grecon Dimter OptiCut 200-1 Optimizing Crosscut Saw Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: Infeed lengths min./max. 3,000 – 5,000 mm Infeed widths min./max. 80 – 200 mm Infeed thicknesses min./max. 38 – 80 mm Max. wood cross-section: 200 x 50 mm End product length min./max. 700 – 1000 mm Average number of cuts per board: 5 Wood types: softwood or hardwood Performance data: Feed speed max. 180 m/min, infinitely variable Time per crosscut incl. braking: 0.7 – 1.2 s Component overview: Pos. 1: Infeed conveyor belt in front of the saw Length 1.5 m, linked to the saw’s feed motor Pos. 2: Automatic crosscut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and built-in waste extraction unit Graphical input terminal, 1/4 VGA display, with numeric keypad and function keys, including OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor/sorting station with drive unit, without ejector Belt length approx. 1.5 m The machine is already dismantled and in storage. The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The conveyor table is included, only the rubber belt is missing. Sale on behalf of client, ex location Austria, without transport and assembly Subject to errors in description and price Optional transport and loading by us possible To avoid misunderstandings, an on-site inspection by appointment is possible and recommended Sale in as-is condition Technical data, condition description, year of manufacture and scope of supply according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale No warranty given for used machines; the sale is governed by “purchased as seen” Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Stanje: rabljeno, Leto izdelave: 2004, WEINIG GRECON DOUBLE-END FINGER JOINT LINE MOD. PJ 150/500 - CE - USED - Infeed wood length: 150 - 700 mm - Wood width: 40 - 150 mm - Wood thickness: 18 - 80 mm Kdodpfjwry I Eox Abxjn - Press length: 6100 mm - Pressing force: 120 kN - Milling motor: 15 kW - Scorer: 5.5 kW - Year: 2004 CE

Leto izdelave: 2021, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prodajam stroje iz tehnološke linije za proizvodnjo konstrukcijskega lesa KVH. V sestavi proizvodne linije so med drugim: 1. Poševni izmetni transporter 2. Podajalna miza za vizualno klasifikacijo lesa 3. Buffer pred izrezovalcem napak 4. Avtomatski izrezovalec napak s kamero za fluorescenčno kredo 5. Buffer pred strojem za spoj z zobatim klini Ksdpfoy Dd Nkex Abxodn 6. Stroj za kliničaste spoje z nanosom lepila in žago za rezanje na želeno dolžino do 13 m 7. Verižni skladiščni transporter iz lepilnega stroja do skobeljnega stroja 8. Avtomatski podajalnik v štiristranski skobeljni stroj 9. Štiristranski skobeljni stroj Winter 6-33 10. Valjčni izhod iz štiristranskega skobeljnega stroja 11. Samodejni stroj za pakiranje skobljanega lesa 12. Verižni podajalnik 13. Merilnik trdnosti lepljenega lesa

Stanje: novo, Leto izdelave: 2023, Nanašalni glavnik, oblika zob 10 mm Nanašalni glavnik, oblika zob 15 mm Nanašalni glavnik, oblika zob 20 mm Profil klinastih zobcev Nanašalni glavnik za lepilo Nanašalni glavnik za lepilni nanos Kdjdpfx Abeiacbpjxsn Lepilni glavnik Lepilni glavniki >>Dobavni rok iz zaloge

Stanje: dober (rabljeno), Grecon finger jointing line Infeed cross buffer with packet formation 2 connected milling machines, 600 mm table width Each milling machine equipped with glue rollers - Automatic transfer - Continuous press - Crosscut saw - Outfeed roller conveyor with side transfer Infeed lengths: 500 - 4000 mm The system has been dismantled and is available at short notice. Control system is defective; a new control unit with software is included (not installed, software not tested). Kdsdsh I Dufjpfx Abxsn

Stanje: pripravljen za uporabo (rabljen), Nanos lepila s profilnimi valji GRECON nanos lepila 10 - 15 - 20 mm čepi Kjdpfjlxx Dqjx Abxjdn

Stanje: rabljeno, Leto izdelave: 2000, Complete production line for manufacturing slatted frames (bed bases). From wood processing all the way to final assembly/packaging. Includes all components, such as milling machines, saws, profiling machines, forklifts, compressors, etc. The larger machines/systems are from around the year 2000. Consisting of: Solid Wood Side Rail Production - 2 x Multiple-blade saws RAIMANN KR 450 + KS 310 - Optimizing saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling/Finishing Longitudinal Rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC Drilling and Sawing Machines: - KOCH drilling and sawing line with turning and stacking system - ISE CNC drilling and sawing system with stacking unit Kdodpfex S Sb Dex Abxon - 2 x ISE CNC woodworking centers / drilling systems - ISE CNC cross rail milling machine - 2 x Manual rail drilling machines Single Machines: - GANNOmat CNC drilling and dowel insertion machine - Panhans spindle moulder - 2 x EiMa double saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combined saw-milling machine - 2 x multi-spindle drilling machines - 2 x belt sanders - Paint spray booth - Various small machines Assembly - Assembly automation for standard slatted frames - End cap pressing machine/line - 14 x pneumatic assembly tables Logistics – Factory Equipment - 3 x LINDE forklifts E16 / E20 - 7 x LINDE high-lift/ electric pallet trucks - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system for outdoor area - Batch of mesh box pallets + Euro pallets - Racking systems, various Packaging - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Goods - Remaining stock of wood/cross rails - Remaining stock of end caps/plastic parts - Remaining stock of various assembly material Many more PHOTOS and detailed DATA available upon request.

Stanje: rabljeno, Complete production line for manufacturing slatted frames (bed bases). From wood processing all the way to final assembly/packaging. Includes all components, such as milling machines, saws, profiling machines, forklifts, compressors, etc. The larger machines/systems are from around the year 2000. Consisting of: Solid Wood Side Rail Production - 2 x Multiple-blade saws RAIMANN KR 450 + KS 310 - Optimizing saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling/Finishing Longitudinal Rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC Drilling and Sawing Machines: - KOCH drilling and sawing line with turning and stacking system Ksdpfxex S Scbe Abxodn - ISE CNC drilling and sawing system with stacking unit - 2 x ISE CNC woodworking centers / drilling systems - ISE CNC cross rail milling machine - 2 x Manual rail drilling machines Single Machines: - GANNOmat CNC drilling and dowel insertion machine - Panhans spindle moulder - 2 x EiMa double saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combined saw-milling machine - 2 x multi-spindle drilling machines - 2 x belt sanders - Paint spray booth - Various small machines Assembly - Assembly automation for standard slatted frames - End cap pressing machine/line - 14 x pneumatic assembly tables Logistics – Factory Equipment - 3 x LINDE forklifts E16 / E20 - 7 x LINDE high-lift/ electric pallet trucks - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system for outdoor area - Batch of mesh box pallets + Euro pallets - Racking systems, various Packaging - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Goods - Remaining stock of wood/cross rails - Remaining stock of end caps/plastic parts - Remaining stock of various assembly material Many more PHOTOS and detailed DATA available upon request.

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), Workpiece dimensions: 150-1000 x 50-205 x 35-50 mm, output length: 3000-6000 mm, connected load: 80 kW, length: 15,480 mm, width: 5,500 mm, height: 2,000 mm, weight: 10.5 t, including documentation. Kedpfxeign Efs Abxodn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Grecon Ultra Finger Jointing Line - Made in Germany - Year of manufacture: 2001 - Suitable for softwood and hardwood - Documentation (DTR) included TECHNICAL PARAMETERS: Minimum/maximum element length: 150/1000 mm Kjdpfjrf Ty Ssx Abxsdn Minimum/maximum element width: 40/205 mm Minimum/maximum height: 20/80 mm Minimum length to maximum width ratio: 2:1 Initial length, min/max: 3000/6100 mm Saw blade motor power: 5.5 kW Saw spindle diameter: 30 mm Shaper motor power: 22 kW Shaper spindle diameter: 50 mm Total length: 11,500 mm Width: 5,300 mm Total power consumption: 39 kW Air pressure: 8 bar Air consumption: 660 NL/min Extraction port diameter: 250 mm and 100 mm Extraction requirement: 6,150 m³/h at 30 m/s Transport dimensions: 13,000 mm x 2,200 mm x 2,000 mm Weight: 6,700 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, GreCon Dimter OPTICUT 204 R Optimizing Cross-Cut Saw – Year of manufacture: 1998 – Full optimization Kedpfoh Hfknox Abxjdn – Defect detection and cutting (cutting to mark) – Width measurement – Capability to cut aluminum TECHNICAL SPECIFICATIONS: – Max. cutting length: 4000 mm – Min. workpiece length: 200 mm – Max. cutting height: 100 mm – Max. cutting width: 260 mm – Saw blade diameter: 500 mm – Motor power: 9 kW – Max. feed speed: 160 m/min – Acceleration: 2 m/s² – Length and value optimization – Pneumatic material clamping – Three ejectors – Discharge tables – Rotary table – Total length: 2000 cm Transport dimensions: – Length: 1300 cm – Width: 245 cm – Height: 220 cm – Weight: 3500 kg

Stanje: dober (rabljeno), Type FEr LD 180/600/1000 100% operational, automatic rotation Kjdpsuhtmiofx Abxjdn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Hochleistungs-Optimierkreissäge GRECON DIMTER OptiCut S75-4 mit Auskappfunktion. Diese Maschine ist ideal für den präzisen Zuschnitt von Massivholz und verfügt über eine automatische Erkennung und Entfernung von Materialfehlern. Technische Daten: Maximale Vorschublänge: 6300 mm (Schieber) Minimale Schnittlänge: 50 mm Maximale Schnittbreite: 360 x 30 mm / 240 x 160 mm Maximale Vorschubgeschwindigkeit: 60 m/min Hauptmotor (Säge): 7,5 kW Sägeblattdurchmesser: 400 mm Baujahr: 2001 Drehstrom: 400 V / 50 Hz Steuerspannung: 230 VAC / 24 VDC Nennleistung: 11 kW Sicherung: 25 A Maschinenabmessungen: - Einlauf: L 7600 x B 800 x H 1100 mm - Säge: L 1400 x B 1200 x H 1650 mm - Auslauf: L 5200 x B 600 x H 900 mm Arbeitshöhe gesamt: 850 mm Fehlererkennung: Automatische Identifikation und Auskappung von Holzfehlern (Äste, Risse usw.). Kedpfjyxwyrjx Abxedn Ertragsoptimierung: Softwaregestützte Berechnung zur bestmöglichen Ausnutzung des Rohholzes. Bedienungsanleitung in Englisch und Deutsch sowie Elektroplan im Lieferumfang. Besichtigung im laufenden Betrieb möglich. WHATSAPP-Video auf Anfrage.