Graver Brusilni Stroj Brusilni Stroj nakup rabljenega (28.008)

Stanje: dober (rabljeno), Leto izdelave: 1988, Deckel SOE engraving cutter grinding machine, year 1988. Accessories: collets. In good, fully operational condition. Hedpfeuqv Naox Agxel

Stanje: dober (rabljeno),

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1996, Brusilni stroj za dleto Proizvajalec: Deckel Model: S0 Leto izdelave: 1996 – preizkušen v delavnici Hjdpex Hx Eljfx Agxol Št. stroja: 26617 Dodatki: - Brusilni disk s prirobnico - Navodila za uporabo Rabljeno, kot je vidno Stroj tehnično ustreza stanju iz letnika izdelave.

Stanje: delavnici obnovljeno (rabljeno), Stroji za ostrenje rezil Proizvajalec: harich (Deckel) Model: SSM (S0E) prenovljen s CE z garancijo Oprema: - stojalo za stroj - integrirano odsesavanje prahu - brusilni kolut s prirobnico - orodje za oblačenje - navodila za uporabo vključuje novo strojno elektriko po najnovejših varnostnih predpisih vključno z novo izdelavo elektro načrta vključno s CE dokumentacijo vključno s CE označevanjem vključno z izjavo o skladnosti CE Hedsx A U Rgspfx Agxol

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Graver brusilni stroj Proizvajalec: Maschinenfabrik Baden-Baden Model: FSS Leto izdelave: 1988 - obnovljen, na novo prebarvan RAL7012 bazaltno siva, RAL 7035 svetlo siva Št. stroja: 3018 Hedpfx Agsxxyt Soxsl Garancija: 12 mesecev za enoizmensko delo od dobave. Pri strojih zunaj našega severobavarskega prodajnega območja stroške poti krije kupec. Oprema: - Stojalo za stroj - Brusilni disk s prirobnico - Navodila za uporabo vklj. z novo električno napeljavo Stikalo za vklop/izklop v novem ohišju z undervolt tuljavo za izvedbo zaščite pred ponovnim zagonom, na primer pri izpadu elektrike ali izklopu vtiča rabljeno kot vidno Stroj je tehnično v stanju, ki ustreza letu izdelave.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Engraving Cutter Grinder Manufacturer: Deckel Model: S0E Year of manufacture: 1984 - overhauled, newly repainted RAL7035 light grey / RAL7012 basalt grey Machine No.: 84-5532 with warranty Accessories: Hjdpfx Ageqctp Ssxel - Machine stand - Microscope with mount - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual Including installation of an on/off switch with undervoltage release for restart protection (e.g., in case of power failure or disconnection of the power plug) including fabrication of a mounting adapter plate - Used, as seen -

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, Pantograph Cutter Grinder Manufacturer: Maschinenfabrik Baden-Baden Model: FSS Year of Manufacture: 1985 – overhauled, newly painted RAL 7012 basalt grey, RAL 7035 light grey Machine No.: 2992 Warranty: 12 months for single-shift operation from delivery date on the mechanics overhauled by us. Electrical and electronic components are excluded as they have only undergone a functional test. For machines located outside our North Bavarian sales area, travel expenses are to be borne by the customer. Hsdpfotqdqgjx Agxjl Accessories: - Grinding wheel with flange - Operating manual Includes new electrics On/off switch in new housing with undervoltage release coil for restart protection, e.g. in the event of a power failure or unplugging Used, as seen The machine is technically in accordance with the standards of its year of manufacture.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1986, Engraving Cutter Grinder Make: Deckel Model: S0E Year of manufacture: 1986 - overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine no.: 86-5751 with warranty Equipment: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual Incl. installation of an on/off switch with undervoltage release for implementation of restart protection for example, in case of power failure or unplugging the mains plug incl. fabrication of a mounting adapter plate Hedpfsqctniox Agxel Used condition, sold as seen The machine meets the technical specifications of its original year of construction.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Cutter Grinder Manufacturer: Deckel Model: S0E Hodpfolxpfmox Agxjl Year of manufacture: 1988 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine No.: 88-6730 Warranty: 12 months for single-shift operation from delivery For machines located outside our North Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual Including installation of an on/off switch with undervoltage release for restart protection (e.g., in the event of a power failure or unplugging) including the production of a mounting adapter plate Sold as seen Technically, the machine corresponds to the state of the art at the time of manufacture.

Stanje: pripravljen za uporabo (rabljen), Deckel SOE Engraving Cutter Grinder Maximum collet bore: 17.5 mm Maximum grinding length: 90 mm Maximum grindable angle: 180° Maximum grindable radius: 10 mm Coarse traverse: 100 mm Fine adjustment: 15 mm Swivel range of indexing head carrier: 90° Coarse adjustment of indexing table slide: 40 mm Fine adjustment of indexing table slide: 12 mm Height from tube guide center to grinding spindle center: 140 mm Wheel size: 100 x 50 x 20 mm Accessories: Optics Collets You are welcome to come for an inspection. You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. If you have any questions, please feel free to call us. The telephone number can be found at the very bottom of the item page in the legal notice / seller’s information section. Visit our shop to view our other offers. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. The installation and electrical connection of the machine or equipment must be carried out or checked by a qualified specialist. Deviations from technical data as well as errors in the article description may occur and are reserved. Hedjv T T Ivopfx Agxel Shipping is exclusively to businesses – private buyers can only collect in person.

Stanje: pripravljen za uporabo (rabljen), Deckel SOE Punch and Die Grinder Maximum grinding length: 90 mm Maximum grindable angle: 180° Maximum grindable radius: 10 mm Coarse travel: 100 mm Fine adjustment: 15 mm Swivel range of indexing head carrier: 90° Coarse adjustment of indexing head slide: 40 mm Hodpfx Aexyv Axegxsl Fine adjustment of indexing head slide: 12 mm Height from tube guide center to grinding spindle center: 140 mm Wheel size: 100 x 50 x 20 mm You are welcome to arrange a viewing. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Should you have any questions, please feel free to contact us by phone. The telephone number can be found at the bottom of the article page in the legal notice / seller’s legal information section. Visit our shop and have a look at our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. The installation and electrical connection of the machine/equipment must be carried out and/or checked by a qualified professional. Deviations from technical data and errors in the item description may occur and are subject to change. Shipping is only available to business customers – private buyers can only collect in person.

Stanje: pripravljen za uporabo (rabljen), Deckel SOE Engraving Cutter Grinder Maximum collet bore: 17.5 mm Maximum grinding length: 90 mm Maximum grindable angle: 180° Maximum grindable radius: 10 mm Coarse slide travel: 100 mm Fine adjustment: 15 mm Swiveling range of dividing head carrier: 90° Coarse adjustment of dividing head slide: 40 mm Fine adjustment of dividing head slide: 12 mm Height from centre of tube guide to centre of grinding spindle: 140 mm Hodpfx Aeq U R Tzogxjl Wheel size: 100 x 50 x 20 mm Accessories: Guide rail for twist drills Optics Collets Grinding wheels You are welcome to visit for an inspection. We can also arrange affordable shipping for you! You will receive a proper invoice. For customers from abroad, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description of the products only. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Stanje: dober (rabljeno), Leto izdelave: 1977, Funkcionalnost: popolnoma funkcionalen, Deckel S0E Engraving Cutter Grinding Machine with Accessories Technical Data: >> Machine No.: SOE 77-3997, Year of Manufacture: 1977 >> Drive Motor Speed: 2800 rpm >> Grinding Spindle Speed: 4500 rpm >> Drive Power: 0.55 kW / 380 Volt >> Approx. Weight: 200 kg Hsdpfxowrm Nvo Agxol Accessories and Equipment: >> Collets >> Grinding Wheels >> Machine Stand / Base >> Dressing Device >> Tools >> Grinding Dust Extraction About the Machine: A Deckel SOE engraving cutter grinding machine with accessories is being offered. Mechanically and electrically tested. A well-maintained and fully functional machine. Take advantage of the opportunity to view and test the machine under power at our location.

Stanje: rabljeno, Cutter Grinder, Grinding Machine, Angle Grinder, Lathe Tool Grinder, Tap Grinder, End Mill Grinder, Surface Grinder, Drill Grinder, Bench Grinder, Double Bench Grinder, Tool Grinder - Manufacturer: Feinmechanik Weilheim, Deckel Tool Grinder Type SO/64-6550 - Motor Power: 0.37 kW 2800 rpm Hedpfx Aepix Nregxjl - Speed: 2800 rpm - Grinding Wheels: Ø 100 mm - Dimensions: 510/450/H1280 mm - Weight: 67 kg

Stanje: zelo dobro (rabljeno), Stroj za brušenje rezkarjev, brusilni stroj, kotna brusilka, brusilka za stružne nože, brusilka za navoje in svedre, brusilka za rezkarje, ravnalna brusilka, brusilka za svedre, dvostranska brusilka, kovinski dvostranski brusilni stroj, orodjarska brusilka -Proizvajalec: Deckel orodjarska brusilka tip SOE -Število napenjalnih klešč: 48 kos -Moč motorja: 0,55 kW -Hitrost vrtenja: 2800 obr/min -Brusni kolut: Ø 100 mm -Dolžina brušenja: 90 mm -Največji brusilni kot: 180° Hjdpjy Ifc Tefx Agxel -Največji brusilni radij: 10 mm -Groba premik: 100 mm -Fina nastavitev: 15 mm -Nagibna os nosilca delovne glave: 90° -Fina nastavitev delovne sani: 12 mm -Višina središča cevi do središča brusilne vretena: 140 mm -Dimenzije: 430/530/H1200 mm -Teža: 131 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GD12002, teža obdelovanca (maks.): 150 kg, dolžina brušenja: 1.000 mm, premer brušenja: 360 mm, skupna masa: 4.700 kg, TEHNIČNI PODATKI Maks. premer brušenja: 360 mm Maks. dolžina brušenja: 1.000 mm Maks. teža obdelovanca: 150 kg PODATKI O STROJU Moč glavnega pogona: 5 kW Dimenzije & Teža Dimenzije (D x Š x V): 3.030 x 2.250 x 2.030 mm Teža: 4.700 kg OPREMA PLC krmiljenje Kontra konica Hsdpfx Agoy A Nl Uexsl Delovno vreteno Brusilno vreteno s prirobnico in brusilnim kolutom Notranja brusilna naprava Sistem za mokro brušenje Električni ročni kolešček Delovna luč Centrična konica Vpenjalna glava Navodila za uporabo

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Wide Belt Sander VIET Target 211 B Calibration and fine sanding machine with 2 sanding units and a single top sanding motor Working width: 1100 mm Sanding belt dimensions: 2200 x 1130 mm Workpiece dimensions: 4 - 160 mm Motor for table height adjustment: 0.18 kW, 400 V, 50 Hz Main motor: 8.0 kW, 400 V, 50 Hz 2 feed speeds 1st Unit: Sanding roller, rubber-coated, 90 Sh, 2nd Unit: Sanding pad, fixed & air-cushion sanding pad, time-controlled Compressed air requirement: approx. 6 bar Extraction connection diameter: 2 x 150 mm Approximate dimensions (L x W x H): 1700 x 1750 x 1800 mm Weight: approx. 1400 kg Hsdpfoy Exhwex Agxjl Automatic workpiece thickness adjustment with digital display Workpiece thickness adjustment via foot pedal Automatic conveyor belt centering Sanding belt oscillation Sanding belt (emergency) stop with disc brakes Table extension with 2 rollers at infeed and outfeed Emergency stop Main switch CE compliant INCLUDES many sanding belts INCLUDES 2 new graphite sanding shoe inserts NEW ball bearings for return rollers NEW drive motor V-belts Note on used machines: • Errors in technical specifications and prior sale reserved. • Quoted prices are ex works – free loading at location! • Machines have been cleaned and function tested. • All machines are sold as viewed, without any warranty or guarantee claims. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered if your address and telephone number are provided!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Širokopasovni brusilni stroj SCM Sandya S600 RCS 110 | ODLIČNO stanje | Leto izdelave 2015 Naprodaj je visokokakovosten širokopasovni brusilni stroj proizvajalca SCM (Sandya S600 RCS 110) v zelo dobrem stanju. Stroj je popolnoma funkcionalen in takoj pripravljen za uporabo. Delovna širina: 1.100 mm Delovna višina: 4–170 mm Glavni motor: 15 kW Hitrost traku: 3–16 m/s Hitrost podajanja: 3–18 m/min Dolžina traku: 2.150 mm Hjdoy Hn U Aspfx Agxsl Jekleni kalibracijski valj R (Ø 140 mm) Kombinirana enota CS: Gumijasti valj (Ø 160 mm, 30 Sh) Elektronski segmentni brusilni čevelj (širina segmenta 30 mm) Leto izdelave: 2015 Zelo lepo ohranjeno, tehnično brezhibno Vse informacije brez garancije. Tehnični podatki po navedbah proizvajalca oz. prejšnjega lastnika. Pridržujemo si pravico do napak, sprememb in vmesne prodaje. Brez jamstva ali garancije.

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg Hsdpjych Igofx Agxjl 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machines: • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Hodpfxjychqzs Agxel Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Working width: 190 mm Hodpfx Agewyda Ujxjl Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2001, Abrasive belt length 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Cross belt version 1st unit cross belt pad: Electronic segmented pad Abrasive belt width 1st unit: 150 x 4800 mm Drive 1st unit: kW 2nd unit: Longitudinal roller 2nd unit version: Steel calibration roller Abrasive belt length 2nd unit: 2150 mm Abrasive belt width 2nd unit: 1350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: Pad unit 3rd roller version: electronic segmented pressure beam SDS system Pad 3rd unit: electronic segmented pads, 32 mm width Abrasive belt length 3rd unit: 2150 mm Abrasive belt width 3rd unit: 1350 mm Suitable for lacquer sanding: Yes Belt blow-off: Yes Vacuum conveyor: Yes Hedpfx Agoxzi S Nexjl Feed speed, fixed: infinitely variable 5 - 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electric Infeed height: variable (lower table travels) Table adjustment: electro-motorized Table display: digital Working height or feed table height: 880 mm Location: Nattheim

Stanje: dober (rabljeno), Koda: 0373 Znamka: SBF STEFANI - ITALIJA Model: 2W 556 - CE standard Avtomatski širokopasovni brusilni stroj z dvema pasovoma za mizarstvo, pohištvo, pohištvo po meri, plošče, vrata, lesene okvirje in drugo – CE standard Tehnični podatki: Maksimalna delovna širina: 1100 mm Maksimalna delovna višina: 160 mm Minimalna delovna višina: 3 mm Dolžina brusnega traku: 2150 mm Hitrost podajanja traku: 5–10 m/min Vhodni in izhodni valjčni transporterji Avtomatsko pozicioniranje mize Sestava: 1° Kalibracijski valj premera 150 mm 2° Brušilni valj premera 150 mm Oba sta nastavljiva po višini Avtomatski sistem centriranja traku Moč motorja: 15 Hp Premer odsesovalnih nastavkov: 150 mm Hedey Ia Idjpfx Agxel Stisnjen zrak: 6 bar Skupne dimenzije (mm) 1700 x 1850 x 2050 h Teža: 1650 kg

Stanje: novo, Leto izdelave: 2026, Model: Mechanical with touch panel Tooth profiles: All common tooth profiles Blade width: Bandsaws up to 230 mm Blade thickness: 0.6 - 6.0 mm Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Rake angle: 0 - 40° Hsdpfxsyz Srbs Agxjl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A80722MM2, širina brušenja: 1.350 mm, moč: 31 kW (42,15 KM), vrsta nastavitve višine: električni, Automatic calibrating wide belt sander suitable for fine sanding of solid wood. This sander belongs to the top tier of automatic wide belt sanders, characterized by its compact size, excellent sanding quality, easy operation, and high reliability. It was used for final sanding of solid parquet flooring. 2 main units: soft sanding rollers, 1350 mm width Additional units: scotch brite brush, cleaning brush, cleaning air blowers Total maximum power consumption: 31 kW Sanding width: 1350 mm Constant working height – suitable for in-line integration Motorized adjustment of working thickness with LCD display Stepless feed speed adjustment of the conveyor belt Stepless speed adjustment of both working units Pneumatic air blowers for working units Ammeter for motor load monitoring Remote shutdown of units from the control panel 4-position stop for compensation of belt grit Perforated feed belt with vacuum suction option Roller table extension at infeed and outfeed Pneumatic oscillation, electronically controlled CE safety standard Weight: 3800 kg Year of manufacture: 2008 Hedpfxjy Idxye Agxsl Damage to the first sanding roller – see photo Price negotiable: 30,000 EUR excl. VAT Machine is fully operational, sold as-is In stock in Telnice near Brno, Czech Republic Testing, demonstration, and operator training available