Giben Prismatic 2 H100 Spt nakup rabljenega (80.786)

Stanje: rabljeno, Leto izdelave: 1999, - Uporabna dolžina reza: 1600 mm - Previs plošče: 100 mm - Debelina plošče: 6 - 22 mm (+/- 1 mm toleranca na ploščo in znotraj plošče) Ploščna žaga z mizo za nalaganje in napravjo za odlaganje Proizvajalec: Giben Tip: Prismatic 2 h100 SPT Leto izdelave: 1999 Tehnični podatki - Uporabna dolžina reza: 1600 mm - Previs plošče: 100 mm - Odprtina vpenjalnega nastavka: 117 mm - Višina delovne površine: 950 mm - Dimenzije dvižne mize: 1600 x 2700 mm - Največja višina sklada: 620 mm - Dimenzije: 2444 x 1220 mm, 2500 x 1250 mm - Debelina plošče: 6 - 22 mm (+/- 1 mm toleranca na ploščo in znotraj plošče) Žaga z visokohitrostnim vozilom - 2 vodilni gredi: 40 mm - Pogon žage preko motorja z regulirano frekvenco - Hitrost podajanja: 1 - 100 m/min Nwodpfx Anjzuyywepsn - Hitrost povratka: 100 m/min Nastavitev hitrosti žage iz nadzorne plošče. Avtomatsko uravnavanje dolžine reza glede na dimenzije plošče - Hitrost predrezila: 5035 vrt/min - Hitrost žaginega lista: 3760 vrt/min - Moč motorja glavne žage: 11 kW - Moč motorja predrezila: 2,2 kW - Glavni žagini list: 400 mm - Glavna žagina gred: 75 mm - Predrezilo: 215 mm - Nastavitev predrezila od zunaj v korakih: 0,025 mm - Menjava glavne žage in predrezila preko sistema za hitro vpenjanje (pnevmatično) Sani - Miza za nalaganje na območju sani z brezvzdrževalnimi valjčnimi tirnicami - Sani na vrhu z 3 plavajoče nameščenimi vpenjalnimi nastavljami s patentiranimi, zložljivimi spodnjimi vpenjalnimi prsti - Pogon sani preko servomotorja - Pogonski moment: 6,5 Nm - Hitrost podajanja: 1 - 60 m/min - Hitrost povratka: 60 m/min - Vodilo kablov preko vlečnega kabla - 2 sprednja vodila Avtomatsko nalaganje preko dvižne mize - Dimenzije: 1600 x 2700 mm - Dvižna miza s 4 stebri in 12 brezvzdrževalnimi valjčnimi skupinami - Avtomatsko štetje višine sklada pri dvigovanju plošč preko krmiljenja - min. dimenzije plošče: 2000 x 1200 mm - največja višina sklada brez jaška: 620 mm - največja obremenitev: 12 t - višina vhoda: 330 mm Miza za nalaganje - 2 kos mize za nalaganje z PVC oblogo 2000 x 510 mm Krmiljenje stroja G-Drive 1D Sesalni sistem - 1 sesalni priključek na pritiskalni palici: 115 mm - 1 sesalni priključek na spodnji strani stroja: 200 mm - Odvod žagovine poteka neposredno na žagnem agregatu preko jeklenih kanalov v žagovinski kanal, ki je razporejen vzdolž žagovne linije in je zatesnjen s fleksibilnimi gumijastimi robovi. Parametri zmogljivosti - Povprečni čas cikla/reza: približno 25 s Kakovost - Natančnost reza: +/- 0,15 mm je zagotovljena (pri ravnih ploščah) - Kotnost: +/- 0,15 mm/m Opomba: Tehnični podatki in opisi so prepis takratne potrditve naročila. Podatki so namenjeni za informiranje in niso zavezujoči.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Sezionatrice Giben model Prismaic 2 SPT H 100 – Leto 2002 Stroj v odličnem stanju, popolnoma delujoč in pripravljen za uporabo. Opremljen z zadnjim stranskim nalaganjem. Nsdpfsy R D Rhox Anpown Širina reza: 4300 mm. ✔ Opravljeni preizkusi delovanja ✔ Popolno vzdrževanje (pnevmatsko, mehansko in elektronsko) Stroj je pregledalo in obnovilo specializirano podjetje za servis in vzdrževanje. 📞 Kontaktirajte nas za več informacij ali za preizkus stroja.

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, moč: 14 kW (19,03 KM), največja širina rezanja: 3.800 mm, Oprema: CE označba, Naprodaj je prizmatična žaga Giben Prismatic 2 SP H.100, leto izdelave 2000! Njdpfxsz H H U No Anpown Delovna širina: 3800 mm Število objemnikov: 6 Izstop žaginega lista: 100 mm Nameščena moč: 14 kW

Stanje: rabljeno, Leto izdelave: 2006, z avtomatskim sistemom za dovod materiala na dvižno mizo, opremljeno s 4 natančnimi vreteni, kar zagotavlja, da je kup vedno enakomerno nameščen v pravi ravnini. S 4 pogonjenimi skupinami valjev. Dimenzije dvižne mize: 6000 x 2200 mm. Stran dovodnega sistema: levo (gledano s strani operaterja). Max. višina kupa: 450 mm. Višina dvižne mize v spodnjem položaju: določiti. Hitrost za dviganje in spuščanje: 0,7 m/min. Pogonski sistem dvižne mize: 3 kW. Pogonjena skupina valjev: 4. STANDARDNA KONFIGURACIJA. Uporabna dolžina reza: 6000 mm. Dovod materiala na dvižno mizo: da. Višina delovne površine: 950 mm. Previs žage: 100 mm. Odprtina vpenjalnika: 117 mm. Nadzorni sistem stroja: G Drive RT. Število vpenjalnikov, ki se premikajo v smeri X: 1. Število vpenjalnikov, ki se premikajo v smereh X in Y: 1. Število fiksnih vpenjalnikov: 1 kos. Min. debelina materiala (z bočnim usmerjevalnikom): 10 mm. Min. debelina materiala (z dovodom na dvižno mizo): 10 mm. Min. dimenzije plošče (z dovodom na dvižno mizo): 2400x1200 mm. Max. dimenzije plošče (z dovodom na dvižno mizo): 5500x2070 mm. Max. dimenzije plošče (brez dovodnega sistema na dvižno mizo): 5800x2010 mm. Varnostni sistem v skladu s CE: vključen. Napetost: 400 V / 50 Hz. KONFIGURACIJA STROJA. Osnova stroja: Konstrukcija osnove stroja iz jekla je varjena s postopkom varjenja z oblokom, nato pa je obdelana in končno obdelana na CNC stroju. Trdna konstrukcija osnove stroja zagotavlja visoko kakovost reza in hkrati visoko hitrost reza ter izjemno dolgo življenjsko dobo celotnega stroja. Previs žage: 100 mm. Moč motorja glavne žage: 7,5 kW. Moč motorja predrezalne žage: 2,2 kW. Premer glavne žage: 400 mm. Premer predrezalne žage: 215 mm. Hitrost podajanja voznega mehanizma žage: naprej: 1-170 m/min. Nazaj: 170 m/min. Pogonski sistem za podajanje voznega mehanizma žage: servo pogon. Premer sesalne odprtine na spodnji strani (1x): 200 mm. Premer sesalne odprtine na zgornji strani (2x): 115 mm. Zahvaljujoč trdni konstrukciji osnove stroja se mase optimalno porazdelijo, kar preprečuje izkrivljanje in s tem zagotavlja popolnoma navpično gibanje žage. Miza stroja iz jekla z ločenimi, snemljivimi opornimi elementi iz visokokakovostnega in trpežnega materiala. Vozni mehanizem žage se premika po dveh okroglih vodilih, ki so horizontalno nameščena. Veliki prizmatični valji (premer 86 mm), z vzmetno nameščenimi povratnimi valji, zagotavljajo gladko linearno podajanje, zelo majhen kontaktni tlak in omogočajo skoraj brezhibno delovanje voznega mehanizma žage. Teža in sile, ki delujejo na vozni mehanizem žage, se enakomerno porazdelijo na obe vodili (50/50) in na vsak posamezen prizmatični valj. Vozni mehanizem žage se premika po vodilih popolnoma brez maziva. Obe vodili sta oddaljeni od linije reza, zunaj neposrednega območja prahu. Premer vodilnih drogov je 40 mm, zato so to največja in najtrdnejša vodila, vgrajena v tem sektorju. Pnevmatski sistem za hitro vpenjanje; za hitro in udobno menjavo orodja. Ta sistem je izjemno zanesljiv, saj je mehansko napet s prirobnico z bajonetno zaporo in vzmetno silo ter se s pnevmatskim hitrim spojnikom odklene. Prirobnico je treba zavrteti za približno 10°, da jo je mogoče odstraniti. Zaradi odlične dostopnosti in dejstva, da operater ne potrebuje nobenega drugega orodja, je menjava orodja zelo enostavna in jo je mogoče izvesti v nekaj sekundah. Nastavitev predrezalne žage se izvaja od zunaj. Nedpfx Aezn N Ikenpewn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Ponujamo to pripravljeno za uporabo tračno žago za plošče Giben KG.8250, letnik 2001. Proizvajalec: Giben Model: KG.8250 Nwedpezaiwdsfx Anpjn Letnik izdelave: 2001 Stanje: pripravljeno za uporabo Kategorija ID: 1426 Tip ID: 844 Tip stroja: tračna žaga za plošče Če imate kakršnakoli vprašanja ali potrebujete dodatne informacije, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Tehnični podatki: Nwodpfx Anjzd Evvjpen Maks. širina skobljanja: 500 mm Maks. višina skobljanja: 250 mm Premer nožnega valja: 110 mm Število nožev: 3 2 hitrosti podajanja Ročno dviganje Napajanje: 380 V Moč motorja: 4 kW Skupne dimenzije: Dolžina: 1000 mm Širina: 1100 mm Višina: 1400 mm

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 58.764 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 502748, vpenjalna sila: 1.000 kN, premer vijaka: 30 mm, razmak između stupova: 420 mm, delovna prostornina: 144 cm³, tlak vbrizgavanja: 1,905 letvica, izmetalna sila: 41 N, hod izmetalca: 150 mm, odmični hod: 500 mm, dolžina plošče: 590 mm, širina plošče: 590 mm, vgradna višina: 250 mm, skupna dolžina: 4.550 mm, skupna širina: 1.450 mm, skupna višina: 2.000 mm, skupna masa: 4.800 kg, ogrevalna zmogljivost: 9 kW (12,24 KM), moč črpalke: 30.000 W, vrsta nastavitve višine: hidravlični, hod: 150 mm, višina orodja: 250 mm, teža orodja: 700.000 g, Oprema: dokumentacija / priročnik, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral devices The injection moulding machine is in good condition and ready for operation. Offered for sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all associated Wittmann peripheral devices can be included for an additional charge. We acquired the Demag ERGOtech in 2020 as part of our company expansion for a customer project and equipped it with appropriate Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and shows no defects. Nodpfstltvzex Anpjwn OPTIONALLY, we are also offering all related Wittmann peripheral equipment for sale: Peripheral devices from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: - 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l - 1 pc. Flow measurement – ultrasonic 140–180° - 1 pc. Digital interface 20mA - 1 pc. Packaging for temperature control unit List price: €6,980.00 Sales price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects List price: €4,750.00 Sales price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granulate - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granulate, hinged lid with built-in collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for installation of a separator of the 200 series - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused List price: €8,467.00 Sales price: €4,233.50 All prices are net, plus statutory VAT of 19%. PLEASE NOTE: The offer does not include relocation or transport costs for the machine. These can be offered and organised as an additional service if required. For further questions, please feel free to contact me directly at any time.

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, SOPREM Präzisions-Bandanlagenzuführung (Abwickler + Richtwerk) — 2003. Komplette, abgestimmte Zuführeinheit für dünnes Präzisionsband, einsatzbereit zur Kombination mit einer kleinen Hochgeschwindigkeitspresse. Abwickler — Typ H1000.1000ZV. Maximales Coil-Gewicht: 1.000 kg. Coil-Ø: 1.000 mm außen / 375–520 mm innen. Abwickelgeschwindigkeit: 2–20 U/min, 1,5-kW-Antrieb. Richtwerk — Typ BR 19 . 160 . 12 . U . Bandkapazität: bis 0,5 mm Dicke × 160 mm Breite. Hydraulisch angetriebene Präzisions-Richtmaschine. Beide Einheiten Baujahr 2003 · 400 V / 50 Hz · Synchronisierte Linie mit Not-Halt-Verkettung zur nachfolgenden Presse · Hergestellt in der Schweiz. Technische Daten Abwickler / Coilhaspel H1000 / 1000ZV / 10M / LK.LF / N1 / G Fabrik-Nr. (Typenschild): 110103 Max. Coilgewicht: 1.000 kg Coil-Außendurchmesser: max. 1.000 mm Coil-Innendurchmesser: 375–520 mm Nsdpszav H Sefx Anpown Abwickelgeschwindigkeit: 2–20 U/min Motor: KSMV 90L (4), 1,5 kW, 1.400 U/min Getriebe: RMI 110 FL LCB, Übersetzung i = 70 Rutschkupplung: eingestellt auf 400 Nm Bandabtastung: Bodenkontaktplatte (Schlaufenregelung) Präzisionsrichtwerk (Richtmaschine) BR19.160.12.U Funktion: Beseitigung der Coilkrümmung vor der Presse Max. Banddicke: 0,5 mm Max. Bandbreite: 160 mm Antrieb: hydraulisch angetriebene Präzisionsrichtmaschine Elektr. Anschluss: 400 V AC, 50 Hz, 3~ + N + PE Absicherung: 25 A Vorsicherung

Stanje: novo, Leto izdelave: 2026, The SPT Series capsule filling machines are designed for fully automatic filling of hard gelatin capsules in sizes #00 to #4 (optionally #000 and #5) with powder, granules, or pellets for the pharmaceutical and nutraceutical industries. Dosing is performed via a dosing disc, ensuring high accuracy of fill quantities. Key features of the new SPT Series of fully automatic capsule filling machines include: - Capsule sizes #000 to 5 - Suitable for filling powder, granules, and pellets - Fast and easy format changeover without additional tools - Touch screen interface - User-friendly operation via HMI (Human Machine Interface) - Manufactured according to GMP guidelines - CE certified - 2-year warranty - Installation and repair service based in Germany Specifications: Nwjdpfxody Dyfs Anpsn - Number of segments: 1 / 2 / 3 - Maximum output (capsules per hour): 8,500 / 17,000 / 25,000 - Capsule sizes: #00, 1, 2, 3, 4 (optional #000, 5) - Maximum rotation speed: 140 rpm - Speed control: Inverter - Machine dimensions: 900 x 1,100 x 1,700 mm

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 3.500 l, Oprema: dokumentacija / priročnik, BRINOX 3,500 L Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Storage tank / process tank Nominal volume: 3,500 liters Total volume: 4,082 liters Jacket volume: 226 liters Empty weight: approx. 1,760 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) Jacket material: 1.4404 CE marking: CE 0036 Permissible pressure PS vessel: -1 / +3 bar Permissible pressure PS jacket: -1 / +6 bar Test pressure PT vessel: 5.6 bar Test pressure PT jacket: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV approval including design inspection, final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel was fully inspected and released ex works. Carried-out inspections incl.: • Pressure test according to PED • Design inspection by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing comparison (as-built) • Verification of material certificates • Calibration of manometers • Checking of markings • Documentation check as per test list FAT and TÜV protocols fully available. DESIGN • Cylindrical, horizontal storage tank • Double jacket for heating/cooling • High-grade pharmaceutical design • Manhole with round pressure locking system • CIP piping system • J-tube / internal piping • Sight glass DN80 • Multiple reserve- and process connections • Biocontrol flanges • Heavy-duty mounting blocks / trunnion design • Lifting lugs • Nameplate with complete PED identification DOCUMENTATION – fully and structurally available • EU Declaration of Conformity • TÜV certificate with acceptance report (Module G) • TÜV design inspection and certification • 3.1 material certificates • Welder lists and work samples • Non-destructive test reports (RT, PT) • Dimensional inspection reports • Calibration certificates for manometers • Surface and manufacturing reports • Parts list • Detailed drawings (body, lid, CIP, J-tube, etc.) • Operating and maintenance manuals Complete digital documentation file available. CONDITION • Never used in production Nwedpfx Anoylnwyopon • Stock item • Internal surfaces as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production plants • Process and disposal systems SPECIAL FEATURE High-quality BRINOX pharmaceutical manufacturing with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking and documented FAT inspection. Not a standard tank – but certified project quality with comprehensive GMP-compliant documentation.

Leto izdelave: 2026, stanje: novo, Small rotary tablet press SPT-TPL 200 (suitable for small scale production); Touchscreen and PLC control platform; HMI system; The machines conform to GMP regulations and are CE certified; Njdpfx Asdy Dzionpewn Number of stations (Max.): D=13 | B=16 | BB=19 1. Max. tablet output per hour (T/h): 46,000 | 57,000 | 68,000 2. Max. tablet diameter - Round (mm): 25 | 16 | 13 - Shaped (mm): 25 | 19 | 14 3. Max. tablet thickness (mm): 8.5 4. Max. main compression force (t): 5 5. Max. pre-compression force (t): 1 6. Dimensions (mm): 600 x 1106 x 1705

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 3.500 l, Oprema: dokumentacija / priročnik, BRINOX 3,500 L Storage Tank – 1.4404 – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o., Slovenia Type: SVBBH-3500 Item No.: Serial Number: 1003461 Year of Manufacture: 2020 Condition: As new / unused BH6771-BH1001 Package 29 TECHNICAL DATA Product Type: Storage Tank / Process Vessel Nominal Volume: 3,500 liters Total Volume: approx. 4,082 liters Empty Weight: approx. 1,750 kg Product-contact Material: 1.4404 (AISI 316L) Internal Surface: Electropolished Surface Roughness: tested according to roughness protocol (Ra ≤ 0.8 µm) Permissible Pressure PS Vessel: -1 / +3 bar Test Pressure PT Vessel: 5.6 bar Permissible Pressure PS Jacket: -1 / +6 bar Test Pressure PT Jacket: 10.8 bar Permissible Temperature TS: -10°C to +150°C Nwodpfx Anjylnppepen Fluid Group: 2 Design to AD 2000 Pressure vessel according to PED 2014/68/EU Category III Module G – Single Inspection CE Marked FAT – Factory Acceptance Test Complete FAT acceptance conducted on 26 August 2020. Documentation Review: complete and released Welding documentation checked and compliant Delta ferrite test performed, no deviations Surface roughness checked and passed All tests rated as "OK". FEATURES • Horizontal cylindrical pressure vessel • Dished ends (Klöpperbottoms) • Multiple CIP ports at the front end • CIP spray ball system • Manway with round pressure closure • Pressure and temperature connections • Bottom outlet • Stainless steel support legs • Pharmaceutical-grade weld seams DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV certificate • Module G Individual Inspection • FAT protocols • Welding documentation • WPQR / WPS • 3.1 Material certificates • Non-destructive test reports • Delta ferrite test report • Roughness protocol • Dimensional accuracy check • Calibration certificates • Technical drawings • Parts list • Operation and maintenance manual Complete digital documentation file available. CONDITION • Never in productive use • Stored as warehouse stock • Internal surfaces absolutely as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotechnological applications SPECIAL FEATURES Custom-manufactured BRINOX pharmaceutical vessel with full FAT acceptance, inspected welding documentation, delta ferrite verification, documented surface roughness and comprehensive PED Module G individual inspection. Not a standard tank – but pharmaceutical-grade, validation-ready, with comprehensive technical documentation.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, Pressing force: 1000 kN / 100 t, ram stroke: 200 mm, max. operating pressure: 290 bar, control system: DNC70, safety distance: 166 mm, overrun time: 104 ms, overrun distance: 7 mm. Nodewcz Axjpfx Anpswn

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 3.500 l, Oprema: dokumentacija / priročnik, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial Number: 1003460 Year of Manufacture: 2020 Condition: As new / unused Package 28: BH6770-BH1001 TECHNICAL DATA Product Type: Batch Tank / Pressure Vessel Working Volume: 3,500 litres Total Volume: 4,304 litres Jacket Volume: 202 litres Empty Weight: 1,958 kg Wetted Material: 1.4435 Jacket: 1.4404 CE Marking: CE 0036 Permissible Pressure Vessel PS: -1 / +3 bar Test Pressure Vessel PT: 5.6 bar Permissible Jacket Pressure PS: -1 / +6 bar Test Pressure Jacket PT: 10.8 bar Permissible Temperature TS: -10 °C to +150 °C Fluid Group: 2 Design Standard: AD 2000 Pressure vessel according to PED 2014/68/EU Category III Module G – Individual Inspection Notified Body: TÜV SÜD Industrie Service GmbH (Identification number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The tank was subjected to a complete FAT at the factory and released. Inspections performed include: • Pressure test according to PED • Visual inspection of all weld seams • Non-destructive examinations (RT, PT as per test plan) • Dimensional and drawing check (as-built) • Interior roughness measurement (Ra ≤ 0.8 µm) • Calibration check of pressure gauges • Verification of labelling • Complete documentation review Full FAT protocols available. DESIGN • Cylindrical, horizontal tank • Double jacket with half-pipe coil • Internally electropolished and passivated • High-gloss polished product-contact surface • Pharmaceutical-grade weld seams • Manhole DN 500 • Powder/product inlet nozzle DN 300 • CIP connections • Safety valve • Pressure and temperature ports • Agitator connection • Heavy-duty trunnion mounting • Lifting lugs DOCUMENTATION – complete and structured Comprehensive project-specific quality and manufacturing documentation, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive test reports (RT, PT etc.) • Analysis certificates for welding consumables and gases • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates • Reports and EU conformity for installed components • Compilation with parts list • Partial drawings • Operating and maintenance manuals Complete digital documentation file available. CONDITION • Never in productive use • Stored as inventory • Internal surface absolutely as new • No corrosion • No signs of use • Absolutely mint industrial condition • Available immediately SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotech applications SPECIAL FEATURE Nsdpfx Asylng Usnpswn High-quality BRINOX pharmaceutical manufacturing with full PED Module G individual certification by TÜV SÜD, CE 0036 marking, and documented FAT test. Not a standard tank – but certified project quality with comprehensive GMP-compliant documentation.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 3.200 l, Oprema: dokumentacija / priročnik, BRINOX 3,200 L Solution Tank – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Package 17 Manufacturer: BRINOX d.o.o. Tag-No.: BH6762-BH1001 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: ELUTION / Solution Tank Capacity: 3,200 liters Material: 1.4404 (AISI 316L) CE marking: Present (CE 0036) Tank pressure: Operating pressure: -1 / +3 bar Test pressure: According to TÜV approval Jacket pressure (heating/cooling jacket): Operating pressure: -1 / +6 bar Test pressure: According to TÜV approval Temperature range: -20 °C to +150 °C Pressure vessel according to PED 2014/68/EU Module G – Individual inspection Acceptance by notified body (ID number 0036) FAT – Factory Acceptance Test The tank was inspected as part of a documented FAT process. The tests included, among others: • Welding documentation inspection • Visual inspection of weld seams • Leak test • Pressure test • Surface roughness test • Sensor calibration test • Layout and dimensional inspection • Documentation review Complete FAT report including all test protocols available. SPECIFICATION • Double jacket for heating/cooling • Completely made of stainless steel 316L • Mirror-polished internal surface Nedpoykkhrefx Anpown • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manholes/revision openings • Clamp and flange connections • Instrumentation prepared (pressure, temperature, sensor technology) • Heavy-duty project configuration • Lifting lugs for crane handling CONDITION • Never used in production • Stock item from project surplus • Interior absolutely clean • No corrosion • No signs of use • Industrial as-new condition • Immediately available DOCUMENTATION – complete and well-structured Comprehensive, project-specific quality and manufacturing documentation is available for the tank, including: • EU Declaration of Conformity and Warranty Certificates • TÜV certificate with acceptance report • TÜV design inspection and certification • Material certificates (3.1) • Welders’ lists and welding procedure qualifications (WPQR/WPS) • Non-destructive test reports (NDT) • Analysis certificates for welding filler metal and shielding gas • Surface roughness protocol • Surface treatment report • Dimensional accuracy inspection • Internal pressure test • Calibration certificates • Assembly documentation • Part drawings • Operating and maintenance manuals Complete documentation folder available digitally. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production facilities • CIP media SPECIAL FEATURE This is not a standard tank, but a premium BRINOX project-built unit in genuine pharmaceutical quality with certified pressure design, full PED conformity (Module G), documented FAT inspection, and extensive quality documentation. Project-quality for sterile applications – immediately available.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A0008858, Rabljen Verderer VA25S-A01AS2SSSSPTPT, zračno upravljan črpalka z dvojno membrano (AODD), iz nerjavečega jekla, serijska številka: A0008858; leto izdelave: 2012. V zelo dobrem stanju. Posebna koda konfiguracije (VA25S-A01AS2SSSSPTPT) označuje robustno kovinsko črpalko, izdelano z delom za tekočino iz nerjavečega jekla, sedeži iz nerjavečega jekla in kroglami in membranami iz PTFE (teflona). Opredeljuje robustno konfiguracijo črpalke Verderair VA 25, ki je odporna proti koroziji. Ta posebni model je običajno zasnovan za obdelavo agresivnih kemikalij, močnih kislin, topil in tekočin pri visokih temperaturah. Meje delovanja in fizične lastnosti za Verderair VA 25 SS SS TF TF vključujejo naslednje parametre: Velikost priključka (tekočina): 1" BSP ali NPT (navojni) Velikost priključka (zrak): 1/2" NPT Največja pretočna zmogljivost: 189 litrov na minuto (50 GPM) Največji izhodni tlak: 8,6 bar (125 PSI) Največja temperatura tekočine: 104 °C (220 °F) – omejeno s komponentami iz PTFE Največja višina sesanja (suho): 3,0 do 4,9 metra Največja višina sesanja (mokro): 6,0 do 8,8 metra Največja velikost delcev: 3,2 mm (zmogljivost obdelave trdnih snovi) Teža črpalke: približno 16,5 do 18,8 kg (težka zaradi konstrukcije iz kovine) Certifikati: ATEX (varna za uporabo v eksplozivnih okoljih) Dimenzije: D 470 mm x Š 250 mm x V 360 mm SS (del za tekočino): ohišje in razdelilniki iz nerjavečega jekla 316. Zagotavlja visoko kemično odpornost in mehansko vzdržljivost; SS (del za zrak / sedeži povratnih ventilov): odvisno od generacije, to predstavlja robusten središčni del za zrak iz nerjavečega jekla ali sedeže ventilov iz nerjavečega jekla. Preprečuje tveganje korozije ali pokanja, povezano z aluminijastimi ali plastičnimi komponentami v težkih okoljskih razmerah; TF (krogle povratnih ventilov): krogle iz PTFE (teflona). Zagotavlja tesno zapiranje in široko kemično združljivost med ciklom delovanja; TF (membrane): membrane iz PTFE (teflona) (običajno podprte s plastjo EPDM za večjo prožnost). PTFE zagotavlja najvišjo stopnjo univerzalne odpornosti proti korozivnim tekočinam. Nedpfoz Abcpex Anpswn Cena: 2.290 EUR + DDV, po dogovoru, FCA: Oradea/Romunija Pridržana pravica do sprememb, napak in predhodne prodaje. Govorimo angleško. /Govorimo nemško./ Govorimo madžarsko. /Govorimo francosko/Govorimo romunsko.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 5976/07, Funkcionalnost: popolnoma funkcionalen, moč: 2,5 kW (3,40 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, skupna širina: 1.850 mm, skupna dolžina: 2.500 mm, skupna višina: 1.750 mm, skupna masa: 420 kg, premer vrtanja: 130 mm, pritisk: 6 letvica, delovna višina: 1.000 mm, Oprema: dokumentacija / priročnik, RBB Trapano dvostranski vrtalni stroj tehnično obnovljen v našem skladišču v Belgiji. Vključen je komplet rabljenega orodja – glej sliko. Nwedpjxg Ngqjfx Anpon

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BH6723-BH1001, kapaciteta rezervoarja: 1.000 l, Oprema: dokumentacija / priročnik, BRINOX 1,000 L Pre-Filling Vessel – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Nodpoykqmzofx Anpswn Manufacturer: BRINOX d.o.o. Model: SVMMBI-1000 Tag No.: BH6723-BH1001 Serial No.: 1003454 Year of manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling / Process Vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: approx. 610–762 kg Product-contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual Inspection Notified body: TÜV SÜD Identification number: 0036 TÜV CERTIFICATION EU Declaration of Conformity (Module G) Certificate No.: Z-EU-SI-LJU-20-05-2702107-19125214 Test Report No.: P-EU-SI-LJU-20-05-2702107-19125214 Final inspection according to PED Annex I No. 3.2 carried out Pressure test according to Annex I No. 3.2.2 carried out Accepted without deviations Permissible number of load cycles: 10,000 cycles (1.3 bar) Date of acceptance: 20.05.2020 FAT – Factory Acceptance Test Complete factory FAT performed: • Pressure test • Visual inspection of weld seams • NDT testing (RT/PT) • Dimensional check • Surface roughness measurement (≤ 0.8 µm) • Calibration test • Documentation verification FAT fully documented. CONSTRUCTION • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade welding • Manway DN 500 • CIP connection • Safety valve • Pressure gauge • Multiple process and measuring nozzles • Designed for pressure and vacuum operation CONDITION • Never used in production • Factory-tested • TÜV Module G certified • As-new industrial condition • No signs of use • Immediately available DOCUMENTATION Comprehensive, structured documentation available, including: • EU Declaration of Conformity • TÜV certificate with acceptance report • TÜV design inspection • FAT protocols • Material certificates to EN 10204 3.1 • WPS/WPQR and welder lists • NDT reports • Surface roughness protocols • Internal pressure test reports • Dimensional protocols • Calibration certificates • Parts list and drawings • Operating and maintenance manuals Digital documentation file available. • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP plants • Biotechnology High-end BRINOX pharmaceutical design with PED Cat. IV Module G individual inspection by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – certified project quality. Immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 9.000 l, Oprema: dokumentacija / priročnik, BRINOX 9000 L GMP Washing and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical production facility. Suitable for the production, storage, and supply of process solutions in GMP-regulated environments. Construction and Equipment Cylindrical stainless steel tank in horizontal design Nwsdpeykkk Hofx Anpsn End-face process connections Large manway with pressure closure Integrated CIP system with spray ball High-gloss polished internal surface Hygienic, product-contacting connections Multiple measuring and instrumentation nozzles Documented weld seams with full traceability Separate stainless steel feet included in delivery Condition Very good optical and technical condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and auxiliary components are present as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Welding Documentation Inspection”, the welding documentation was inspected as part of factory acceptance testing (FAT 01, 23.10.2020). The following were confirmed, among others: Identification of welders and weld seam inspectors Welder qualifications per EN ISO 9606-1 WPS and WPQR documentation Proof of shielding gas suitability Documented test welds Spot sample visual inspection without defects Traceability according to material certificates 3.1 The complete welding documentation is included in the Turn-Over-Package. Documentation – Fully Available FAT plan and FAT report Layout and construction drawings P&ID diagrams Calibration protocols Surface and roughness tests Leak test Welding plan WPQR WPS Welder qualifications Borescopy report Incoming goods inspection reports Sensor calibrations The complete technical documentation is available in digital format. Special Features Fully documented GMP version with certified welding documentation and comprehensive quality package. Very well suited for reinstallation in pharmaceutical production plants or validation-required applications.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 1.500 l, Oprema: dokumentacija / priročnik, BRINOX 1,500 L Process Vessel – 1.4435 – Double Jacket – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6726-BH1001 Type: SVMBBI-1500 Year of Construction: 2020 Serial No.: 1003458 Equipment No.: 20051401 CE Marking: CE 0036 Condition: As new / unused Empty Weight: 866 kg TECHNICAL DATA Product Type: Main Filling Vessel / Process Vessel Design: Cylindrical with dished heads Working Volume: 1,500 litres Total Volume: 1,785 litres Product-contact Parts Material: 1.4435 Jacket Material: Stainless steel (double-jacket design) Max. Permissible Pressure (PS) Vessel: -1 / +3 bar Test Pressure (PT): 5.4 bar Max. Permissible Temperature (TS): -10 °C / +150 °C Pressure vessel according to PED 2014/68/EU Module: G Fluid Group: 1 SURFACE & EXECUTION Internal Surface: High-gloss polished, pharmaceutical design Product-contact areas in 1.4435 Welds neatly ground Pharma CIP-capable design EQUIPMENT • Double jacket for heating/cooling • Large manway with clamp closures • Multiple instrument and process nozzles • Pressure sensor / temperature ports • Bottom outlet • CIP/spray ball connections • Various blank flanges • Insulated media connections on jacket • FDA-compliant seals CONDITION • Never used in production • Stored as stock Nwsdpfxsykuhis Anpsn • Interior absolutely as new • No corrosion • No signs of use • Immediately available DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV inspection documents • PED Module G documentation • 3.1 material certificates • Pressure test protocol (PT 5.4 bar) • Technical drawings • FAT documentation • Operating manual SPECIAL FEATURE Large-capacity BRINOX main filling vessel 1,500 L in 1.4435, PED Category IV Module G, CE 0036, with complete documentation, pharmaceutical surface finish and pressure test at 5.4 bar. Project quality for sterile applications – available immediately.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BH6721-BH1001, kapaciteta rezervoarja: 1.000 l, Oprema: dokumentacija / priročnik, BRINOX 1,000 L Pre-filling Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBBl-1000 Tag-No.: BH6721-BH1001 Serial number: 1003453 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling tank / process vessel Nominal capacity: 1,000 liters Total capacity: 1,400 liters Empty weight: 762 kg Product contact material: 1.4435 (AISI 316L pharmaceutical grade) CE marking: CE 0036 Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 1 Design in accordance with AD 2000 regulations Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (identification number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The vessel was fully FAT tested and released at the factory. Tests performed include: • Pressure test to PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT per testing plan) • Dimensional and drawing verification (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration test of pressure gauges • Check of labeling • Complete documentation check FAT protocols fully available. DESIGN • Cylindrical, horizontal vessel • Double jacket for heating/cooling • Internally electropolished and passivated • Highly polished product contact surface • Pharma-grade weld seams • Manway DN 500 • CIP connections • Safety valve • Pressure gauge • Bottom diaphragm valve • Agitator connection (DN 200) • Multiple spare connections • Heavy-duty trunnion bearing/mount • Transport and lifting device DOCUMENTATION – fully available and structured Extensive project-related quality and manufacturing documentation available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with inspection report (Module G) • TÜV design test and certification • Material certificates 3.1 • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive testing reports (RT, PT, etc.) • Analysis certificates for welding consumables and shielding gases • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy inspection report • Internal pressure test report • Calibration certificates of pressure gauges • Reports and EU conformity of installed components • Compilation with parts list • Component drawings • Operating and maintenance manuals Full digital documentation folder available. CONDITION • Never used in production • Stored as stock • Internal surface absolutely as new • No corrosion • No signs of use • Industrial as-new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURE High-quality BRINOX pharmaceutical manufacturing with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking, and documented FAT testing. Not a standard tank – but certified project quality with comprehensive GMP-compliant documentation. Immediately available. Nsdpfx Asykpqrjnpewn

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 1.000 l, Oprema: dokumentacija / priročnik, BRINOX 1,000 L Pre-Filling Tank – 1.4435 Stainless Steel – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Model: SVMMBI-1000 Tag No.: BH6725-BH1001 Serial No.: 1003455 Year of Manufacture: 2020 CE Marking: CE 0036 Condition: Like new / unused TECHNICAL DATA Product type: Pre-filling / Process vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: 762 kg Product-contact material: 1.4435 Permissible pressure (PS): -1 / +3 bar Test pressure (PT): 5.4 bar Permissible temperature (TS): -10 / +150°C Fluid group: 1 Design standard: AD 2000 Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual Inspection Notified body: TÜV SÜD Identification number: 0036 FAT – Factory Acceptance Test Complete FAT carried out and documented by the manufacturer. Nwedpfeykt T Rsx Anpsn Tests include pressure test, NDT, dimensional inspection, surface roughness measurement, and documentation release. SPECIFICATION • Cylindrical horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade welding • Manway DN500 • Multiple process and measurement nozzles • Safety valve • CIP connections • For pressure and vacuum operation CONDITION • Never used in production • TÜV Module G certified • Industrial as-new condition • Immediately available DOCUMENTATION – complete and available Structured documentation package including: • EU Declaration of Conformity • TÜV certificate with acceptance report • TÜV design review • FAT documentation • Material certificates • Welder lists and WPS/WPQR • NDT reports • Surface roughness record • Surface treatment report • Internal pressure test • Dimensional report • Calibration certificate for pressure gauge • Part drawings • Assembly with bill of materials • Operating and maintenance manuals (unit & components) • Qualification certificates • Analysis certificates for welding consumables and protective gas Digital documentation folder fully available. SUITABLE FOR • Pharmaceutical applications • WFI / PW • GMP plants • Sterile liquid processes • Biotechnology High-quality BRINOX pharmaceutical vessel with PED Cat. IV Module G individual inspection by TÜV SÜD, full FAT, and complete technical documentation. Immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 1.500 l, Oprema: dokumentacija / priročnik, BRINOX 1,500 L Process Vessel – 1.4435 – Jacketed – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6722-BH1001 Year of Manufacture: 2020 Condition: As new / unused CE Marking: CE 0036 TECHNICAL DATA Type: Main Vessel / Process Vessel Design: Cylindrical with torispherical (Klöpper) heads Working Volume: 94 – 1,500 litres Empty Weight: 866 kg Product contact material: 1.4435 Jacket material: 1.4307 Insulation: Fitted Operating Pressure (Vessel): -1 / +3 barg Max. Allowable Pressure (PS): -1 / +3 barg Test Pressure (PT): 5.4 bar Permissible Temperature (TS): -10 °C / +150 °C Pressure Test Date: 2020/04 Pressure vessel as per PED 2014/68/EU Category IV Assessment Procedure: Module G Notified Body: TÜV SÜD Industrie Service GmbH Design Code: AD 2000 SURFACES & WELDS Internal Surface: Electropolished and passivated Pharmaceutical-grade finish External Surface: Industrial ground finish Nwodpfxeykuc Te Anpsn NDT / Inspections: RT (Radiographic testing) PT (Dye penetrant testing) Documented pressure test 2020 EQUIPMENT • Double jacket for heating/cooling • Large frontal manway • Multiple process nozzles • CIP connections • Temperature and pressure connections • Safety fittings • Agitator mounting point • FDA-compliant seals • Complete piping module CONDITION • Never used in production • Warehouse stock • Internal surface absolutely as new • No corrosion • No signs of use • Immediately available DOCUMENTATION – Complete • EU Declaration of Conformity • TÜV certificates and acceptance reports • PED Module G documentation • Material certificates 3.1 (EN 10204) • Welding protocols • NDT reports (RT / PT) • Pressure test report 2020 • Surface inspection reports • Detail and assembly drawings • FAT documentation • Operation and maintenance manuals SPECIAL FEATURE BRINOX pharma process vessel in 1.4435 with electropolished internal surface, AD2000 design, PED Category IV Module G, full TÜV acceptance in 2020, and complete technical documentation. Project quality for sterile applications – immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 1.500 l, Oprema: dokumentacija / priročnik, BRINOX 1,500 L Primary Precipitation Vessel – 316L – Double Jacket – PED Module G – FAT 2020 – Like New Manufacturer: BRINOX d.o.o. Type: SVMBI-1500 Tag No.: BH6724-BH1001 Package 22 Serial Number: 1003457 Year of Manufacture: 2020 Condition: Like new / unused Nwjdjykn Iiopfx Anpjn CE Mark: CE 0036 TECHNICAL DATA Product type: Primary Precipitation Vessel / Process Vessel Nominal volume: 1,500 liters Total volume: 1,785 liters Empty weight: approx. 866 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) Jacket material: Stainless steel Operating pressure vessel: -1 / +3 bar Test pressure vessel: 5.4 bar Operating pressure jacket: as per design Temperature range: -10 °C to +150 °C Pressure vessel in accordance with PED 2014/68/EU Module G – Individual inspection Inspected by notified body 0036 FAT – Factory Acceptance Test (08/2020) The vessel was fully tested at the BRINOX factory as part of a documented FAT. Tests performed included: • Delta ferrite test of weld seams (compliant, no deviations) • Surface roughness test (Ra internal ≤ 0.8 µm, compliant) • Visual inspection of all product-contact surfaces • Pressure testing as specified • Documentation verification • GMP deviation management (non-critical points, fully closed) • Measuring equipment with valid calibration certificate EXECUTION • Double jacket for heating/cooling • Horizontal orientation • High-quality pharmaceutical design • All product-contact areas in stainless steel 316L • Mirror-polished internal surface • GMP-compliant, documented welds • Large manway with swing cover • Multiple clamp and flange connections • Spray ball / CIP connections • Instrumentation prepared (pressure, temperature, sensors) • Insulated jacket with connections • Heavy-duty flange bottom • Lifting lugs and transport configuration • Project build for CSL Behring (Project SPHINX) CONDITION • Never used in production • Direct from project surplus • Internally absolutely as new • No corrosion • No signs of wear • Industrial mint condition • Immediately available DOCUMENTATION Complete project-related quality and manufacturing documentation available, including: • EU Declaration of Conformity • TÜV inspection documents • PED Module-G documentation • Material certificates 3.1 • Welding documentation (WPS/WPQR) • Delta ferrite test reports • Roughness measurement logs • Calibration certificates for measuring devices • GMP deviation reports • Fully signed FAT protocols • Operating and maintenance documentation Documentation is complete and well-structured. • Pharmaceutical active ingredient processes • Precipitation and reaction processes • Buffer and solution preparation • Sterile liquid processing • Biotechnology • GMP-compliant production facilities • High-purity media SPECIAL FEATURE This is a premium BRINOX process vessel manufactured for CSL Behring in genuine pharmaceutical project quality, with full PED Module-G individual inspection, documented FAT 2020 and complete GMP documentation. Not a standard tank – but certified project quality for sterile applications. Immediately available.

Stanje: novo, Leto izdelave: 2024, Handheld Laser Welding Machine LWH-1000-N Gefasst SUP 20S Scope of Delivery: - Laser welding machine with cooling system - Welding torch with adjustable focal length and accessory kit - MAX Photonics fiber laser source - Automatic wire feeder - Hose and cable set - Starter package with nozzles and protective lenses Technical Parameters - Laser power: 1000 W - Laser wavelength: 1064 nm - Welding speed: up to 120 mm/s - Power supply: 230 Hz - Dimensions (with head mount): 630x1300x1500 mm Included in the Price One-day operator training and machine commissioning - Day 1 (up to 8 hours) – Commissioning and training Gefasst SUP 20S Welding Head – Welding and Cutting Otinus laser welding machines are supplied with a range of nozzles and protective lenses. This makes the device extremely versatile and saves money, as the need to purchase a handheld plasma cutter, for example, is eliminated. Operation Thanks to the revolutionary welding system, any user can achieve excellent results after a brief training period. The cable enables the welder to work flexibly at multiple locations without having to move the machine. The small heat-affected zone prevents excessive deformation. The weld seam is produced quickly and efficiently, resulting in a strong and precise weld connection. Intended Use The laser welding unit is designed for professional applications in workshops that require high-quality and visually appealing welds. Laser Source Specifications: 1000 W - Carbon steel: up to 3 mm - Stainless steel: up to 3 mm - Aluminum: 2 mm - Brass: 0.8 – 1 mm 1500 W Njdjhufigspfx Anpown - Carbon steel: up to 4 mm - Stainless steel: up to 4 mm - Aluminum: 3 mm - Brass: 1 mm 2000 W - Carbon steel: up to 5 mm - Stainless steel: up to 5 mm - Aluminum: 4 mm - Brass: 2 mm 3000 W - Carbon steel: up to 8 mm - Stainless steel: up to 8 mm - Aluminum: 7 mm Construction The torch cable allows for great freedom of movement and facilitates welding in various positions. The integrated controller with a large, user-friendly display is intuitive to operate. The unit is equipped with a high-performance cooling system, ensuring reliable operation in demanding environments and 24/7 shift work. Operating Principle The laser welding machine melts the welding wire and the edges of the components to be joined using laser heat. The laser beam is focused and directed towards the welding wire, which is fed through the automatic feeder, and onto the joint area. When the trigger is pressed, the welding torch must be moved along the weld seam in accordance with the wire feed speed. Consistent operating temperature for the laser source and torch is maintained by a water-cooling system. The beam output and cooling are managed by a controller, which adjusts parameters as set by the operator.