Götzinger Powerdrill Typ Bf 315 -Video- nakup rabljenega (10.132)

Stanje: novo, Bore diameter variable mm Number of horizontal drilling heads: 3 pcs. Number of vertical drilling heads: 4 pcs. Weight: 1,500 kg Dimensions (L x W x H): 4,800 x 1,600 x 2,400 mm Width with table extension: 2,300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill, depending on the setup and configuration, you can: - Drill for handle olives in the loose frame part or for finished sashes, with multi-spindle drilling head, quick-changeable, also for routing of lock case recesses for RC 2/security transmission - Drill for corner bearings in the loose frame part, with multi-spindle drilling head, quick-changeable, orientation by stop or measuring (tilt windows) - Vertical drilling from above for hardware, pre-drilling for clip in the loose frame part - Milling vertically from above for handles, profile cylinders, 3D hinge hardware - Horizontal drilling with 2 drilling units, different drill diameters, dowel drilling for end grain and longitudinal sides, setting blocks / transoms, mullions, corner joints, front doors etc. - Horizontal milling for lock case / hardware etc. Machine Description - Base frame in robust welded construction, linear guide for X-axis - Table support 3,000 x 200 mm - 6 pneumatic clamping cylinders with automatic retraction - 2 side stops for end grain machining, manually retractable - 2 longitudinal stops manually extendable/retractable Travel Ranges: - X-axis – 3,000 mm effective length - Y-axis – 180 mm - Z-axis – 105 mm Units: - 1 vertical drilling unit (Unit 1) from above, 1.1 kW drilling motor, speed 1,500 - 12,000 rpm, 1 spindle, collet chuck ER 25 - 1 vertical drilling unit (Unit 2) from above, 1.1 kW drilling motor, speed 3,000 rpm, with quick-change drilling head system - 1 drilling head BKF 3, for olives, quick-changeable - 1 drilling head BKF 3/2 for corner bearings, quick-changeable - 1 vertical milling unit (Unit 3) from above, 2.0 kW milling motor, 1,500 - 16,000 rpm, collet chuck ER 25 - 2 horizontal drilling units (Units 4 and 5) 1.0 kW, 1,500 – 12,000 rpm, collet chuck ER 20 - 1 horizontal milling unit (Unit 3) 2.0 kW, 1,500 – 16,000 rpm, collet chuck ER 20 Control: electro-pneumatic with 3-axis control X, Y, Z NC Position Controller by B + R, input via 10" TFT display Machine complete with 1 set of drill tools Ø 6, 8, 10, and 12 mm; 2 rough/finish cutters HM Ø 16 mm, CE compliant, ready to connect Extraction connection: 1 x Ø 120, 1 x Ø 80 mm Power supply: 1 x 400 V, 16 Amps Air supply: 1 x Ø 9 mm Lsdpjd Ih Hqofx Al Nsaa OPTION: Longitudinal stops right/left with NC axis high/low, programmable, dimension input by rebate or light measurement possible Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – machine weight 1,500 kg ----- Total price in the above configuration, ex-works: upon request Plus delivery and installation/training (Technical information according to manufacturer – without guarantee!)

Stanje: novo, Bore diameter variable mm Number of horizontal drilling heads: 3 pcs Number of vertical drilling heads: 4 pcs Dimensions (L/W/H): 6100 x 1500 x 2300 mm Weight: 950 kg 1 NEW Drilling and Milling Center Götzinger Power Drill 300 With the Götzinger PowerDrill, depending on the requirements and configuration, you can: - Drill on end faces and longitudinal sides - Dowel door leaves, muntins, transoms - Drilling patterns are freely programmable - You can drill for handle olives and corner bearings using quick-change multi-spindle drilling heads - You can mill and drill for lock cases, lever handle sets, PZ cylinders, and 3D hinges - The machine is equipped with both horizontal and vertical milling units - Simple control allows you to create, save, and recall drilling and milling programs as needed Sturdy base frame with sheet metal cladding Table support: 1800 x 200 mm Processing units: X-axis – 500 mm effective travel Y-axis – 0–120 mm Z-axis – 0–105 mm (above the table) Horizontal units: 1 horizontal drilling unit (left dowel drilling unit) ----- Drill motor 220 V, 1.1 kW Collet chuck ER 25 4,000 – 11,000 rpm, adjustable 1 horizontal milling unit for lock cases ----- Milling motor 2.2 kW Speed adjustable, 3,000 – 16,000 rpm Collet chuck ER 25 1 horizontal drilling unit (right dowel drilling unit) ----- Drill motor 1,100 W, infinitely variable 4,000 – 11,000 rpm with ER 25 collet chuck Vertical units: 1 vertical drilling unit ----- Drill motor 1,100 W, infinitely variable 4,000 – 11,000 rpm with ER 25 collet chuck 1 vertical drilling unit – with quick-change drill head system ----- Drill motor 1.1 kW, 3,000 rpm Included: 1 Drill Head BKF 2/3, for corner bearing insertion, quick-changeable ----- For loose single parts, drill arrangement according to customer's hardware 1 Drill Head BKF 3, for handle olive including drill bits, quick-changeable ----- For loose single parts, drill bits: 1 Kubo d = 25, 2 x Dübo d = 10 1 vertical milling unit for lock case ----- Milling motor 2.2 kW Speed adjustable, 3,000 – 16,000 rpm Collet chuck ER 25 1 length stop left and right, useful length 2.7 m, NC controlled Control: electro-pneumatic with three axes NC position controller and integrated machine functions Input via TFT display, 10" color Machine complete, CE compliant, with 1 set of drilling tools: DÜBO each 1 x d = 6, 8, 10, 12 + 2 roughing end mills d = 16, ready to connect Shipping dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg Lajdpfx Aoif Az Uel Noa ----- Total price for the above configuration, ex works: on request Plus freight and installation/commissioning (Technical data as provided by manufacturer – no guarantee!)

Stanje: novo, Bore diameter variable, mm Number of horizontal drilling heads: 3 pcs Number of vertical drilling heads: 4 pcs Götzinger Power Drill in special design with dowel gluing and insertion station With the Götzinger PowerDrill, depending on the type and configuration, you can: - Drill on face and longitudinal sides - Dowel door leaves, mounting timbers, transoms - Freely program drilling patterns - Drill for handle olives and corner bearings with quick-change multi-spindle drilling heads - Mill and drill lock cases, handles, euro-profile cylinders (PZ), and 3D hinges - The machine is equipped with both horizontal and vertical milling units - Easy control system allows you to create, save, and recall drilling and milling programs POWER DRILL – Drilling and Milling Machine Universal drilling machine for drilling olives, corner bearings, doweling on the face and longitudinal sides, milling, lock cases, hinges, etc. Base frame in robust construction, sheet metal cladding Table support: 1800 x 200 mm Machining unit: X-axis – 500 mm effective travel Y-axis – 100 mm Z-axis – 105 mm 1 horizontal drilling unit (left dowel drilling unit) Drill motor 380 V, 1,100 W Collet chuck d=8/10 4,000–11,000 rpm, adjustable 1 vertical drilling unit from above – fixed mount Drill motor 1.1 kW, 3,000 rpm Quick-change drill head system 1 quickly changeable BKF 2/3 drill head, for corner bearings Includes spare drill bit and customer-specific fittings Control: electro-pneumatic with three axes, NC positioning controller, integrated machine functions Input via TFT 10" color display Machine complete, CE-compliant, with 1 set of drilling tools: Each dowel size 1 x d=6, 8, 10, 14 mm, plus 2 rough cutters d=16 mm, Ljdpfed Ih Hyox Al Neaa 1 cutter d=20 mm, ready for connection 1 BKF 3 drill head, quick-change, for olives, including spare drill bit, customer-specific fittings 2 drilling units: 1 x horizontal for overhead drilling (for hinges) 1 x vertical for doweling, right side Drill motor 1,100 W, infinitely variable speed 4,000–11,000 rpm with ER 20 collet chuck 2 milling units for lock cases: 1 x horizontal for hinges, lock cases 1 x vertical from above for euro-profile cylinder (PZ), handles, hinges Milling motor 2.2 kW Speed adjustable 3,000–16,000 rpm ER 25 collet chuck 1 length stop, left and right, usable length 2.8 m, NC-controlled When using the length stop, fixed stops are not used. Dimensions: LxWxH = 2.50 x 1.50 x 2.20 m – machine weight 850 kg PowerDrill LxWxH = 0.30 x 0.30 x 6.00 m – length stop weight 100 kg 1 dowel gluing and insertion station consisting of: - Vibratory feeder drive for dowel supply - Dowel insertion station - High-pressure stainless steel glue pump with glue tank - Full jet valve for precise clean glue application - Blow-off nozzle Additional price for 1 dowel diameter This increases the base machine length by approx. 300 mm (Technical data according to manufacturer – subject to change and without guarantee!)

Stanje: novo, Bore diameter variable, mm Number of horizontal boring heads: 1 pc. Number of vertical boring heads: 0 pcs. 1 Götzinger Dowel Gluing and Insertion Machine BLE The BLE is used to apply glue and insert dowels into the end faces of workpieces. Optionally, the BLE can be upgraded with a drilling unit, counter milling unit, and longitudinal stop. A 10" touch panel enables easy operation in manual or online mode. Basic Frame: compact design, covered with sheet metal Table size approx. 800 x 200 mm Pos. 1 ----- 1 Glue station Full-jet valve Precisely adjustable glue quantity Glue gun for opposing hole application Pos. 2 ----- 1 Stainless steel glue pump, high-pressure pump and glue hose Pos. 3 ----- 1 Insertion station with dowel singling device and insertion cylinder Pos. 4 ----- 1 Vibratory feeder for dowels d 8 x 50 mm with feed hose to the insertion unit Pos. 5 ----- Laedou Uu Uzepfx Al Noa 1 Processing unit with cross table, linear guide, and 3 NC-axis motors X = 200 mm processing width Y = 120 mm processing height Z = 50 mm insertion depth Pos. 6 ----- 1 Positioning control 10" color touch panel Up to 500 drilling patterns can be created and stored, which can be easily recalled as needed (1 drilling pattern can have up to 16 dowel positions) Software prepared for ONLINE connectivity For online control, the data must be prepared in the appropriate software format for the controller – our machine can receive and process these data. ----- Total price for version with Pos. 1 to Pos. 6: on request! Optional equipment and surcharges: ----- Pos. 7 ----- 1 horizontal drilling unit, 1,000 W drilling motor Speed 4,000 – 8,000 rpm, collet chuck mounting Drill feed: pneumatic Surcharge: EUR 4,305.00 Additional accessories such as larger touch screen, additional dowel station for different dowel sizes, scanner for program selection, or top rail gluing, available on request! Prices are net plus statutory VAT, excluding packaging/shipping and commissioning. (Technical data according to manufacturer – subject to change and without guarantee!)

Stanje: novo, Cutting diameter: 315 mm Bandsaw blade dimensions: 3460 x 1.1 x 34 mm Cutting speed: 35 / 70 m/min Cutting width: 400 x 250 mm Cutting capacity at 45°, round: 250 / 280 mm Cutting capacity at 45°, square: 220 / 280 mm Cutting capacity at 60°, round: 180 mm Cutting capacity at 60°, square: 140 mm Connection voltage: 400 V Ljdpfx Aljwfyq To Nsaa Total power requirement: 2.2 kW Machine weight: approx. 0.6 t Dimensions (L x W x H): 2.1 x 1.0 x 1.5 m Mitre bandsaw - Mitre cuts up to 45° left and right - Mitre cuts up to 60° right - Vice with quick-release device - Blade tension monitored via manometer - Electric coolant system

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 7854 Tehnični podatki: - dolžina traku 2515x152mm - širina traku 150mm - oscilacija - navpično gibanje oscilacije - dolžina brušenja 790mm - dimenzija mize 840x300mm - delovna miza za ukrivljene elemente 300x250mm - nastavitev delovne mize 80mm Laodjyh H A Djpfx Al Noa - motor 2,2kW - brusilni agregat nastavljiv pod kotom 90-45 stopinj - nastavitev brusilne glave 0-45 stopinj - premer odsesa 100mm - dimenzije d/š/v 1450/600/1230mm - teža 138kg PREDNOSTI – z oscilacijo – s čevljem – za brušenje krivuljnih in ravnih elementov – agregat z možnostjo dela v navpičnem in vodoravnem položaju – nebarvana – rabljeni brusilnik, v zelo dobrem stanju Cena brez DDV: 3900 PLN Cena brez DDV: 930 EUR glede na tečaj 4,2 EUR (Cene se lahko spremenijo pri večjih nihanjih)

Stanje: rabljeno, tip droga: simpleks, Polnilec Vrsta droga: standardna Laodpfx Aloyvcm Dj Nsa

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Reflow oven by Rehm Laedpfx Aljudk Amo Nea

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Reflow oven manufactured by Rehm Lodpfx Ajudk Agol Nsaa

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: nepreverjeno, številka stroja/vozila: Expander Typ OEE 23,2 315KW, vrsta vhodnega toka: trifazni, skupna masa: 2.800 kg, moč: 315 kW (428,28 KM), vhodna napetost: 400 V, Used expander / extruder, versatile application, can be operated with either a hydraulic counter-pressure slide or various dies (e.g., for shaping feed products). We purchased the machine but unfortunately cannot use it due to insufficient electrical connection capacity at our site. Included: expander extruder with gearbox and drive unit, hydraulic slide (cone type, not plate), rotary cutter, various dies, hydraulic unit with oil cooler. If required, the matching belt dryer is also available. Laedpfx Aljvlwcho Nja Please send inquiries via email. Thank you.

Stanje: dober (rabljeno), Technical data for pallet rack beam: Rack system: Mecalux Included in delivery: 01x Pallet rack beam, used Beam type: 2C-S 1315 Material color: orange Box profile: 130 x 50 mm Connector: 4 HK (hooks) Clear span: 3,595 mm Max. load per beam pair: Lasdpovgtzcjfx Al Nea 2,650 kg with evenly distributed load 02x Integrated safety pin, used For securing the longitudinal beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra charges, which can be quoted separately depending on the place of delivery and scope of order.

Stanje: zelo dobro (rabljeno), Stanje: Rabljeno, z normalnimi sledmi uporabe, tehnično popolnoma funkcionalno Proizvajalec: Vetter (Nemčija) Država izdelave: Nemčija 📦 Komplet vsebuje: 2x zračna blazina Vetter tip 1/6 komplet zračnih cevi (rumene + rdeče) hitra spojka transportna torba komplet točno kot na fotografijah ⚙️ Tehnični podatki: Model: Tip 1/6 Največja nosilnost: pribl. 3,2 t (32 kN) – vsaka blazina Maks. delovni pritisk: 0,5 bara Prostornina: pribl. 403 L Poraba zraka: pribl. 603 L Cev: DN 19 mm delovni tlak 1 bar (14,5 PSI) ISO standard Laodpfey Af Tnex Al Nea 🛠️ Uporaba: tehnično reševanje (gasilci) dvigovanje vozil in strojev delavnice in industrija servisna in interventna dela 📌 Dodatne informacije: priznan nemški proizvajalec – Vetter komplet je popoln in pripravljen na delo trdna, vzdržljiva konstrukcija hitro in varno dvigovanje težkih predmetov prodaja točno kot na slikah

Stanje: zelo dobro (rabljeno), Stanje: rabljeno, z običajnimi sledovi uporabe, tehnično popolnoma delujoče Proizvajalec: Vetter (Nemčija) Država proizvodnje: Nemčija 📦 Komplet vsebuje: pnevmatično blazino Vetter zračne cevi s hitrimi spojkami transportno torbo viden komplet kot na fotografijah ⚙️ Tehnični podatki: Model: Tip 1/13 (VSM 14) Maks. dvižna sila: 65 kN (pribl. 7,2 tone) Maks. delovni tlak: 1 bar (14,5 PSI) Nazivna prostornina: 403 l Poraba zraka: 806 l Letnik: 2018 🛠️ Uporaba: Lodpfx Asy Af S Rel Neaa tehnično reševanje (gasilci) dvigovanje strojev in vozil servisna in industrijska dela nujne primere 📌 Dodatne informacije: oprema priznanega nemškega proizvajalca čvrsta, vzdržljiva konstrukcija hitro in varno dvigovanje težkih elementov na prodaj natančno kot na slikah

Stanje: zelo dobro (rabljeno), Kataloška številka 7865 Laodpfx Aex U Tvhjl Nea TEHNIČNI PODATKI - maks. premer žaginega lista 315 mm - premer vretena 30 mm - zaščita za list - maks. višina reza 40 mm - min. razmak med žagami 180 mm - maks. razmak med žagami (razmak skrajnih žag) 2400 mm - ročni razmak žag - moč glavnih motorjev 2x3 kW - moč podajalnega motorja 0,74 kW - podajanje na inverter + naprej/nazaj - skupne mere d/š/v 3300x1000x1600 mm - teža 250 kg PREDNOSTI – izdelano na Poljskem – ročni razmak žag – zelo dobro stanje – nebarvano – rabljena dvokrožna žaga Neto cena: 7900 PLN Neto cena: 1880 EUR, odvisno od tečaja 4,2 EUR (Cene se lahko spreminjajo glede na večje nihanje tečaja)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7618 TEHNIČNI PODATKI - širina valja: 500 mm - število nožev: 4 kos - največja debelina obdelovanca: 230 mm z zgornje strani: - zaporne ročice - zobati, vlečni, vrtljivi, sekvenčni dovajalni valj - pritiski - skobeljni valj - pritisk - izhodni gladki vlečni valj z spodnje strani: - 2 drsni valjčki v mizi - motor: 5,5 kW - ročno dviganje mize - 2 hitrostni pomiki: 7,5 in 13 m/min - premer izsesa cevi: 160 mm - mere (d/š/v): 1100x1000x1200 mm - teža: 600 kg PREDNOSTI – izdelano v Italiji – ni prebarvana – rabljena debelinka v zelo dobrem stanju Lsdpfx Aljymnm Do Njaa Neto cena: 15.900 PLN Neto cena: 3.780 EUR po trenutnem tečaju 4,2 EUR (Cene se lahko spreminjajo zaradi večjih nihanj tečaja)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7614 Tehnični podatki: - širina vhoda: 550 mm - višina vhoda: 220 mm - širina osi: 630 mm - dolžina noža: 630 mm - število nožev: 2 kos - dimenzije sita: 60x60 mm - 2 spodnji zobati vpenjalni osi Ledpjydc R Ssfx Al Njaa - motor spodnjih osi: pribl. 1,5 kW - zgornja zobata vpenjalna os - motor zgornje osi: pribl. 1,5 kW - vibracijski kanal - dolžina vibracijskega kanala: 4750 mm - širina vibracijskega kanala: 450 mm - glavni motor: 45 kW - motor vibracijskega kanala: 1,5 kW - samodejni povratni tek - vzvratna vožnja - skupne dimenzije stroja (d/š/v): 3200x1700x1400 mm - skupne dimenzije stroja (d/š/v): 4750x800x1100 mm - teža: cca 4500 kg PREDNOSTI – samodejni povratni tek (z možnostjo nastavitve) – vzvratna vožnja – rabljen sekalnik, zelo dobro ohranjen Cena brez DDV: 120.900 PLN Cena brez DDV: 28.780 EUR po tečaju 4,2 EUR (Cene se lahko spreminjajo zaradi večjih nihanj tečaja)

Stanje: rabljeno, KATALOGŠKA ŠTEVILKA 7585 Tehnični podatki: - premer koles: 630mm - mere mize: 850x810mm - miza nastavljiva po kotu - motor: 3kW - maksimalna višina razreza: 320mm - doseg tračne žage - telo: 600mm - premer izhodnega priključka: 90mm - zavora - dimenzije (d/š/v): 1300x830x2050mm - teža: 420kg Prednosti: – poljska proizvodnja – DTR dokumentacija – zelo dobro stanje – rabljena žaga Neto cena: 8.500 PLN Ljdpfxsx Tptge Al Neaa Neto cena: 2.020 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (pri večjih nihanjih tečaja se lahko cena spremeni)

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7623 Tehnični podatki: - maks. premer žaginega lista: 300 mm - premer vretena: 30 mm - pokrovi za žagine liste: 2 kosa - pnevmatski izteg lista - žagalni agregati nastavljivi pod 45° - ročno nastavljiva razdalja med žagalnimi agregati - min. dolžina reza pri 90°: 300 mm - maks. dolžina reza pri 90°: 4600 mm - širina reza: 90 mm - višina reza pri 90 stopinjah: 90 mm - pnevmatski pritiski: 2 kosa - upravljalni gumbi - podpora za material: 3 kosi - glavni motor: 2×1,1 kW - premer odsesovalnega priključka: 2x90 mm - dimenzije (d/š/v): 5030x1150x1400 mm - teža pribl. 500 kg Lasdpfxex Tpuks Al Nsa PREDNOSTI – italijanska proizvodnja – nagibni žagalni agregati – rabljena žaga, v zelo dobrem stanju Cena brez DDV: 15.900 PLN Cena brez DDV: 3.780 EUR glede na tečaj 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih)

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 7617 TEHNIČNI PODATKI - premer koles: 610 mm - mere mize: 670x640 mm - nagibna miza - motor: 2,2 kW - zavora - največja višina reza: 380 mm - razdalja med trakom in ohišjem: 550 mm - premer sesalnega priključka: 100 mm - dimenzije (d/š/v): 1150x800x2200 mm - teža: 360 kg Laodpfjyg I Axsx Al Nsa PREDNOSTI – izdelano v Nemčiji – ni prebarvano – zelo dobro ohranjeno – rabljena žaga Neto cena: 7.900 PLN Neto cena: 1.880 EUR (po tečaju 4,2 EUR) (Cene se lahko spreminjajo ob večjih nihanjih)

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 7613 Tehnični podatki: - širina vstopa 650 mm - višina vstopa 300 mm - širina gredi 660 mm - dolžina noža 660 mm - število nožev 2 kosa - dimenzije sita 90x100 mm - 2 spodnja zobata podajalna valja - motor spodnjega valja 3 kW - 2 zgornja zobata podajalna valja - motor zgornjega valja 3 kW - tračni podajalnik - dolžina podajalnega traku 2700 mm - širina podajalnega traku 630 mm - glavni motor 75 kW - samodejni povrat - vzvratna vožnja - skupne mere d/š/v 5350x1300x1300 mm - teža 4200 kg PREDNOSTI – italijanska proizvodnja – samodejni povrat (možnost nastavitve) – vzvratna vožnja – rabljeni sekalnik, zelo dobro ohranjen Neto cena: 149900 PLN Neto cena: 35690 EUR glede na tečaj 4,2 EUR (Cene se lahko spreminjajo ob večjih nihanjih) Lasdpfx Asx S I Umjl Noa

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7587 Tehnični podatki: - širina valja: 410 mm - število nožev: 3 kos - zavora - dolžina miz: 2540 mm - železne mize - obe mizi nastavljivi - originalno železno vodilo nastavljivo po kotu - motor: 3 kW - dimenzije (d/š/v): 2540x1000x1050 mm - teža: 730 kg Prednosti: – Poljska proizvodnja – 3-nožni valj – Rabljeni skobeljni stroj – Zelo dobro stanje Ljdpfxoyardmo Al Noaa Neto cena: 7.900 PLN Neto cena: 1.880 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (v primeru večjih nihanj tečaja se lahko cena spremeni)

Stanje: rabljeno, Leto izdelave: 2006, skupna širina: 1.100 mm, skupna dolžina: 3.100 mm, skupna višina: 1.700 mm, - Leto izdelave: 2006 - Dokumentacija na voljo: Ne - CE-certifikat na voljo: Ne - Serijska številka: 466 - Moč glavnega motorja [kW]: 1.1 - Število vreten [kos]: 3 - Največja nastavljiva višina [mm]: 120 - Dolžina mize [mm]: 3100 - Širina mize [mm]: 700 - Napetost [V]: 400 - Poraba toka [A]: 2.8 - Varovalka [A]: 16 - Moč [kW]: 1.1 - Transportne mere: 3100mm x 1100mm x 1700mm (d x š x v) - Transportno število paketov [kos]: 1 Finančne informacije DDV: Cena je navedena brez DDV DDV/obdavčitev po razlikih: DDV je odbiten za podjetnike Dostava in odkup strojev iz industrijskega področja možna kadarkoli Laodpfxox Ig H Ts Al Noa Yorick Diebels

Stanje: novo, Naprodaj električni aktuator ventila Bernard Controls DEUFRA tip SQ10 Lsdpfx Aeyu U Azol Njaa Naprava je nova, neuporabljena, iz zaloge skladišča. Idealno za industrijske aplikacije, tehnološke inštalacije, avtomatizacijo ter upravljanje ventilov in loput. Tehnični podatki: Proizvajalec: Bernard Controls DEUFRA Model: SQ10 Napajanje: 230 V Faza: enofazno Moč: 0,02 kW Frekvenca: 50 Hz Tok: 0,5 A Navor: 100 Nm Hitrost: pribl. 0,43 obr/min Industrijska izvedba Stanje: Novo, neuporabljeno, skladiščno Brez znakov uporabe Popolnoma delujoče Dodatne informacije: Cena velja za en kos.

Stanje: dober (rabljeno), 130 linear meters of Schäfer R3000 shelf rack Used, in like-new condition—see photos Height: 2.5 m Depth: 80 cm Load capacity per shelf: 250 kg Bay width: approx. 128 cm Negotiation price: €26,800 net, ex stock Offer includes: • 101 uprights or frames, 2.5 m, galvanized • 600 shelves, 250 kg load capacity per shelf, galvanized • 34 cross braces for stabilization • 6 levels per bay (additional levels can be supplied at extra cost) Also available with a bay width of 100 cm! Other configurations possible. Heights: 2.5 m or 3.5 m available. Goods in stock. Transport and assembly available upon request. Viewing possible anytime by appointment. Further information available on request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Technical data, details, and prices are subject to change and prior sale! See our terms and conditions. All prices ex VAT, ex stock.) Purchase / Sale We are constantly looking for and offering numerous items from various sectors: • broom-clean clearance of facilities • company liquidations • fast – flexible – efficient! • We also clear out and/or dispose for insolvency administrators. Send us a few details and we will respond promptly. To visit our website, simply click on our logo! Laodpfx Asd Nftxsl Nea

Stanje: dober (rabljeno), Technical specifications for pallet racking system: Racking system: SSI Schäfer Type: K Technical data for installation: Number of rack rows: 01 unit Length per rack row: 15,520 mm Number of bays per rack row: 05 units Ledpfoywi Ncjx Al Njaa Number of levels plus floor level: 03 units Technical data on capacity: Pallet spaces per bay: 12 units Number of pallet spaces per row: 60 units Total number of pallet spaces: 60 units Assuming: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n/a Weight per pallet (max.): 700 kg Scope of delivery includes: 06x pallet rack frames, used Material finish: Sendzimir galvanized Profile dimensions: 90 x 75 x 2.5 mm Incl. horizontal and diagonal bracing, frame guards and footplates Frames are pre-assembled (bolted truss) Height: 5,800 mm Depth: 1,100 mm 30x pallet rack beams, used Material finish: orange Box profile: 110 x 50 mm Clear width: 2,995 mm Connector: 2 HK (hooks) Max. load per pair of beams: 2,100 kg, with evenly distributed load 60x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against unintended lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 12x leveling plates, used Design: fully galvanized For leveling racking frames placed on uneven floors 01x load sign With bay and shelf load information, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is offered for collection only. Any requested transport or shipping of this item is subject to additional costs, which can be requested from us depending on the place of delivery or scope of delivery.