Format4 Tempora 60.06 L nakup rabljenega (64.475)

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Vorschubgeschwindigkeit: 10 m/min – 10 + 18 m/min Antriebsmotor: 0,75 kW (S6) – 1,1 kW (S6) Präzisions-Lauf- und Führungsflächen Min. Werkstücklänge: 140 mm Min. Werkstückbreite: 70 mm Segmentierte, gummierte Kettenplatten mit Schnellwechselsystem Die minimale Werkstückbreite variiert in Abhängigkeit von der Werkstücklänge, Werkstückhöhe und der Oberflächenbeschaffenheit. Schwenkbares 15“ smartouch-Bedienfeld Unbegrenzter Speicherplatz für benutzerdefinierte Kantenprogramme Feineinstellung der Streckenparameter Einfache, klare und intuitive Darstellung der Aggregate und Funktionen Aggregatauswahl und exakte Feineinstellung der motorisch positionierten Aggregate (Einstellgenauigkeit 1/100 mm) direkt über das Bedienfeld Einstellung der Klebertemperatur mit automatischer Temperaturabsenkung im Stand-by-Modus Einstellung des Anpressdrucks in der Druckzone Hodpfx Afey Ndhdsaep Optimierung des Kantenüberstandes beim Kappen (vorne und hinten) Klartext-Fehlermeldungen Wartungsplan und Laufmeterzähler

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a rotary magazine table with a diameter of 750 mm for edge material from 0.4–3 mm, a GlueBox application unit, as well as top and bottom polishing units. The machine is equipped with an advanced x-motion Plus control system featuring a 15" SmartTouch display and a multifunctional milling unit for precise processing of plastic edges. Contact us for more information on this machine. Additional equipment • Application unit with Teflon coating for 1.5 kg EVA granulate • Top and bottom polishing unit Machine advantages Technical machine benefits • Height adjustment for positioning of workpieces: 8–60 mm • Rotary magazine diameter: 750 mm for edge material 0.4–3 mm in rolls • Rotary magazine for edge material with ball bearings, plate diameter: 740 mm • GlueBox application unit • Milling unit with two motors: 0.35 kW (1 HP), 12,000 rpm, HW saw blades, Z 24, D-100x20x3.2 mm, pneumatically tiltable 0°–10° • Top and bottom multifunctional milling units // top and bottom profile sanding machine x-motion plus, for processing plastic edges of 2 and 3 mm • Motorized corner rounding unit with 2 motors, electronic adjustment for milling the front and rear edge profiles of the top/bottom edge for edge thickness of 0.4–3 mm and feed speeds up to 10 m/min • Pre-milling unit with assigned diamond-tipped cutters, speed 12,000 rpm, 2x 1.5 kW Hsdox D Hbtspfx Afasp • Edge and workpiece thickness measurement with Bluetooth technology Additional information Power supply: 3x400V 50/60Hz Chain feed with 2 speeds, feed rates: 10 and 18 m/min Control system: x-motion Plus control with 15" SmartTouch

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, številka stroja/vozila: 220.01.016.22, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 18 m/min, premer vrtljive mize: 750 mm, največja hitrost vrtenja: 12.000 obr/min, The machine is being auctioned due to the closure of operations! Further details on the machine’s equipment can be found in the attached order confirmation. Hjdpfxjxwt Nqe Afasp TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edgeband material (coil): 0.4–3 mm Rotary table diameter for coiled edge material: 740 mm Workpiece infeed support surface: 600 mm Spindle speed, diamond jointer unit: 12,000 rpm Feed rate, chain conveyor: 10 and 18 m/min Cross-cut saw unit speed: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Electrical Data Voltage: 400.0 V Phases: 3 Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW FEATURES Ball bearing rotary table for coiled edge material Workpiece infeed and infeed fence with manual adjustment Chain feed with two feed rates Edge feeder for both coil and strip material, single feed Upper and lower multifunctional milling units with x-motion PLUS via smartouch Upper and lower radius scraper blade, x-motion PLUS Corner processing unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing unit Pneumatic-mechanical retract safeguard for workpiece spacing control glueBox application unit

Stanje: zelo dobro (rabljeno), Edgebander FORMAT 4 Tempora 60.06 glueBox - used Touchscreen Swiveling control panel Program memory Automatic pressure bridge adjustment Feed via transport chain Extendable workpiece support Diamond jointers for both climb and counter-rotation Glue pot located at the bottom Quick-change glue pot system Suitable for PUR adhesives GLUEBOX system Pressure unit with powered roller Cut-off saw with 2 high-frequency motors Cut-off saw, pneumatically tiltable Flush / radius milling unit Motorized positioning control for milling unit Hsdpfou R S Nwox Afaep x-motion PLUS Corner rounding unit with diamond-coated cutters Radius scraper blade Radius scraper blade with motorized positioning Flat scraper blade Workpiece-activated flat scraper blade Infeed lock Spraying unit for release agent Spraying unit for lubricant Spraying unit for cleaning agent Year of manufacture: 2022 ----- Technical Specifications ----- Edging thickness, coil material: 0.4 - 3 mm Edging thickness, strip material: 3 - 6 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen diagonal: 15 inches Jointers dimensions: D 80 x 64 mm Jointers power: 1.1 kW Cut-off saw power: 0.35 kW Milling station power: 0.75 kW Extraction port diameter: 80 + 160 mm Compressed air connection: 7 - 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Info: - All settings checked - Adjusted to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Immediately ready for operation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Stroj je na voljo zaradi reorganizacije obrata. Hodpfsy Dg N Tsx Afaop Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 4.650 h, največja debelina roba: 3 mm, višina izdelka (maks.): 45 mm, višina izdelka (min.): 10 mm, dolžina izdelka (min.): 140 mm, širina izdelka (min.): 70 mm, TECHNICAL DETAILS Machine Frame: Tempora 45.03L, made of thick-walled electro-welded steel construction Control System x-motion plus control: Swiveling 15" smartouch panel Unlimited storage space for user-defined edging programs Fine adjustment of travel path parameters Optimization of edge overhang during pre-trimming front and rear Feed Chain Feed speed: 9 m/min Drive motor: 1.5 kW (S6) Precision running and guide surfaces Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm Segmented, rubber-coated support pads with quick-change system Rotary Table Edge Magazine Roll edge material diameter: 740 mm Roll edge material thickness: 0.4 – 3 mm Extension Frame Workpiece support: extendable up to 450 mm with roller conveyor for ergonomic handling of larger workpieces Upper Pressure Beam Workpiece height: 8–45 mm Pressure beam made of welded, torsion-resistant steel construction Upper pressure rollers arranged in double-row staggered layout Edge Feeding Powered, rubber-coated feed roller Edge thickness: 0.4 – 3.0 mm Workpiece Feed Extendable workpiece support: up to 450 mm Jointing unit material removal: 0 – 2 mm (on feed fence), digital counter Jointing Unit Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm 2 x 1.1 kW (1.5 hp) Material removal: max. 2 mm Workpiece height: max. 45 mm Jointing cutter with diamond blades Z2+2, D-80 x 49 mm (for angular and tear-free workpiece edges) Glue Unit Glue unit: Teflon-coated, for 1.5 kg EVA or PUR granulate Heat-up time: 10 minutes Linear meter performance: 375 lm (at 19 mm panel) Fine-adjustable glue roller Pressure Unit 1 aluminum roller at 90° angle 1 rubber-coated pressure roller Guillotine Shears Roll edge material thickness: 0.4 – 3 mm For pre-trimming, oscillating End Trimming Saw Unit 0.15 kW, speed 12,000 rpm with 90° round shaft guide End trimming saw with 45° travel path, 0.35 kW, 12,000 rpm Selectable between 0° and 10° cut angle Hsdpewwq Dzefx Afaop Milling Unit Multifunctional milling unit: x-motion plus, 2 high-frequency motors, each 0.75 kW, 12,000 rpm Replaceable cutters: 4 pieces each Precision: 2-axis adjustment enables fine tuning in the 1/100 mm range Motorized Corner Rounding Unit Corner processing unit for post-formed and softforming profiles Workpiece height: 10 – 45 mm Edge thickness: 0.4 – 3 mm TCT cutter with 2 blades Radius: max. 6 mm Workpiece length: min. 270 mm (at 19 mm height) Radius Scraper Unit Processing of 2 mm plastic edges Scraper adjustment via digital counter and m-motion positioning system Scanning of workpiece contours Polishing Unit Upper and lower polishing unit Spray device for cleaning agents Flat Scraper Upper and lower flat scraper for residual adhesive removal. Scanning of workpiece contours Multifunctional Milling Unit for Cup Hinge Boring For processing workpieces with cup hinge bores, back panel grooves and acute-angled workpieces

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Ta robna lepilka Felder FORMAT 4 Tempora60.06LX je bila izdelana leta 2019. Opremljena je s krmiljenjem x-motion PLUS, verižnim podajanjem s hitrostjo 10 m/min ter teflonsko prevlečeno lepilno enoto za EVA ali PUR granulat. Stroj podpira debeline robov od 0,4 do 3 mm in ima večfunkcijsko rezkalno agregat. Izkoristite priložnost za nakup te robne lepilke Felder FORMAT 4 Tempora60.06LX. Kontaktirajte nas za več informacij o tem stroju. Hedpfx Afex D D R Soajp

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, višina obdelovanca (maks.): 8 mm, širina obdelovanca (maks.): 60 mm, dolžina obdelovanca (maks.): 140 mm, z okoli 4000 m prevoženih. Z garancijo za novo napravo. Stroj se prodaja brez prikazane vračalne enote. Min. širina obdelovanca (mm): Minimalna širina obdelovanca je odvisna od dolžine, višine in površinske obdelave: 70 Obdelava kolutnega materiala iz debelega PVC/ABS od 0,4–3,0 mm ter tračnega materiala od 0,4–12 mm debeline "e-motion" upravljanje z 18” barvnim zaslonom na dotik, vključno z integrirano programsko opremo za vzdrževanje in razpoložljivo mrežno povezavo Hedpfx Afezcymheaop Stabilno stojalo iz jekla Izvležno podaljšalo za obdelovance olajša delo z večjimi obdelovanci Motorizirana pritiskalna prečka z dvema zamaknjenima valjčnima tirnicama za enakomerno porazdelitev pritiska na obdelovanec Verižni podajalnik s hitrostjo podajanja 12 m/min in gumiranimi nosilci za optimalen oprijem obdelovanca Krogelno ležajen valjčni nosilni pladenj premera 770 mm Vodilno ravnilo z drsnimi valjčki za občutljive materiale Lepilni rezkalni agregat z diamantnimi rezkalniki, upravljan glede na zahtevo, in dvema motorjema po 1,5 kW, 12.000 obr/min, količina odrezka nastavljiva motorizirano od 0–3 mm, vklj. 2 diamantna rezkalnika Ø 80 mm, višina 49 mm, Z2+2 Prepoznavanje robu z infrardečim senzorjem Škarje za predrezanje PVC/ABS materialov Teflonsko premazana lepilna enota s prostornino 1,5 kg, nanos s fino nastavljivim lepilnim valjčkom, sistem za hitro menjavo in nadzor grelnih vložkov (~ 250 tekočih metrov na 1 kg granulata pri plošči 19 mm), funkcija povratka za lepilni bazen. Optimalno za lepljenje masivnih lesenih ali laminatnih robov Pnevmatsko upravljena lepilna enota Motorizirano upravljano pritiskalno agregat z velikim pogonskim pritiskalnim valjem in dvema stožčastima pritisnima valjčkoma, pnevmatsko prednapeta kapalna žaga z dvema neodvisnima motorjema po 0,50 kW, 12.000 obr/min, pnevmatsko vrtljiva 0–15° Multifunkcijski rezkalni agregat za radiusno, poravnalno in posneto rezkanje tankih robov z dvema samostojnima motorjema po 0,75 kW, 12.000 obr/min, motorno nastavljiva poravnava robov in pnevmatska izklopna funkcija iz upravljalne plošče Agregat za obdelavo vogalov za soft- in postforming obdelovance za obdelavo čelnih robov 0,4–3,0mm debeline robu in 10–60 mm višine obdelovanca Dvoosni motorizirano nastavljiv agregat za radiusno vlečno rezilo, vklj. pnevmatska izklopna funkcija Polirni agregat z dvema motorjema Posebna oprema: 020 Površinsko vlečno rezilo, pnevmatsko upravljano 032 Naprava za nanašanje čistilnega sredstva pred polirno enoto 042 Naprava za nanašanje ločilnega sredstva na vstopni strani stroja (PUR-lepilo) 046 podaljšana vodilna letva (+400 mm) 047 Lepljivi rezkar z izmenljivimi rezili višine 64 mm namesto 49 mm, 2 motorja po 2,2 kW namesto po 1,5 kW 051 Multifunkcijski rezkalni agregat z vertikalnimi večkratnimi tipalnimi valjčki za obdelavo kosov z lončastimi vrtinami 053 Naprava za nanašanje mazal na osnovi razprševanja Pnevmatsko-mehanska zapora za preprečevanje prezgodnjega podajanja v stroj 059 samodejno mazanje verižnega transporterja 067 funkcija povratka za lepilni bazen, optimalno za masivne lesene ali laminatne robove 050A dodatni izmenljivi lepilni bazen – protismerni 090 "classic" multifunkcijski in radiusni vlečni rezilni agregat e-motion s polmerom 1+2 mm 071 motorizirano nastavljanje in pozicioniranje za rezkar zaobljenih vogalov 085 priprava u-motion professional 086 priprava orodja R=1,5 mm za agregat zaobljenih vogalov 033 LED osvetlitev 505 profesionalni razdelilnik za odsesavanje

Stanje: zelo dobro (rabljeno), enota za predhodno rezkanje postaja za lepilo v granulah giljotina pritisni valji enota za natančen odrez robu enota za rezkanje presežka roba z zgornje in spodnje strani obdelovanca enota za zaokroževanje robov radialni strgalo polirke dolžina stroja: 450 cm leto izdelave: 2016 11 KW Hodpfx Aoy Uvg Asfasp 400V

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Stroj za lepljenje robov Proizvajalec: Felder Tip: Tempora 60.06, F600 Leto izdelave: 2019 Popolnoma avtomatsko upravljanje iz nadzorne plošče. Enota za spajanje: Da Enota za odrezovanje: Da Enota za rezkanje radijev: Da Rezilo za vlečenje radijev: Da Hsdpfx Afjxix Hxjajp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Ponujamo zelo dobro robno lepilko Format-4 tempora F600, letnik 2023. Hedpfjzak D Sex Afaep Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite. Dober dan, prodamo robno lepilko Format4 Tempora F600 PUR + Eva. Stroj iz leta 2023, nalepljeno približno 60 km robnih trakov. Opremljena z glue boxom za lepljenje s PUR tehnologijo. Poleg tega 2x posodica za hitro menjavo barve PUR/EVA lepila. Več informacij na povezavi:

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, številka stroja/vozila: 351.10.001.16, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 3.000 mm, širina obdelovanca (maks.): 920 mm, višina obdelovanca (maks.): 50 mm, globina vrtanja: 55 mm, TECHNICAL DETAILS Hedpfx Aozcdkwsfaep Maximum drilling depth, horizontal: 30 mm Maximum drilling depth, vertical: 55 mm Horizontal spindles: 6 Vertical spindles: 9 Distance between horizontal spindles: 32 mm Distance between vertical spindles: 32 mm Maximum diameter of horizontal spindles: 15 mm Maximum diameter of vertical spindle: 8 x 15 mm, 1 x 35 mm Workpiece dimensions X-axis: 280 – 3,000 mm Workpiece dimensions Y-axis: 180 – 920 mm Workpiece dimensions Z-axis: 10 – 50 mm Travel speed X-axis: 25 m/min Travel speed Y-axis: 25 m/min Travel speed Z-axis: 15 m/min Drill head motor power: 1.5 kW Drill head speed: 3,600 rpm Circular saw unit speed: 9,000 rpm Milling spindle speed: 24,000 rpm Maximum circular saw blade diameter: 100 mm MACHINE DETAILS Operating / ambient temperature: 15 – 40 °C Relative humidity: max. 90% at 20 °C Operating pressure: 6 – 8 bar Nominal compressed air consumption: 60 Nl/min Air consumption: 1,650 m³/h Compressed air supply diameter: 5/8" Internal diameter: 16 mm Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,605 x 1,950 mm Weight: 850 kg Operating hours (estimated): approx. 800 h EQUIPMENT Additional support roller tables

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2025, število osi: 4, To štiriosno CNC obdelovalno središče Felder Format4 H100 je bilo izdelano leta 2025. Ima velikost mize 3100 x 2100 mm ter je opremljeno z 16-pozicijskim linearnim menjalcem orodij, 12 navpičnimi vrtalnimi vreteni in eno utorno žago. Če iščete visoko zmogljive CNC obdelovalne rešitve, razmislite o stroju Felder Format4 H100, ki ga imamo na voljo za prodajo. Za več informacij nas kontaktirajte. • Stanje: Neprenovljeno – brez garancije • Velikost mize: 3100 x 2100 mm • Menjalec orodij: 16-pozicijski linearni Hsdoy Hrh Hepfx Afaep • Vrtalna enota: 12 navpičnih vreten • Žagalna enota: 1 utorna žaga Dodatna oprema • 2 vakuumski črpalki

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, For sale is a used Format4 jointer-planer machine with a jointing length of 2250 mm. The machine has been inspected by our specialist staff and is in like-new condition. Technical data: - Jointing/planing width: 510 mm - Jointer tables: DUAL foldable Hodpfx Afewnd T Reaop - Silent Power planer cutterhead - Thicknessing height: 4–250 mm - Variable feed speed for thicknessing: 4–16 m/min - 10 HP (7.35 kW) motor - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer, jointer planer, thicknesser Reference: R-A0117

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, working width 510 mm 4-knife cutterblock table length 2250 mm motor power 7.35 kW fence angle adjustment Hedpfxey Dawks Afaep year of manufacture 2008 cast iron tables

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 7,35 kW (9,99 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, premer vretena: 30 mm, vrtilni razpon: 46 °, največja hitrost vrtenja: 18.000 obr/min, vrtljajska hitrost (min.): 1.000 obr/min, The new profil 92 M e-motion spindle moulder is the Format4 premium model designed for maximum operating comfort and guarantees absolute efficiency with minimal setup times during milling operations. The advanced electrospindle features an HSK 63F interface for a pneumatic tool quick-change system. The swiveling range of ±46° allows for unlimited processing versatility. With the self-explanatory e-motion control via the 15" touchscreen operating panel, spindle speed, spindle height and angle, as well as fence adjustment and even the table opening, can be set intuitively and precisely. Memory slots for tools, spindles, and milling programs ensure perfect repeat accuracy and the shortest setup times. Controlled, eccentric supporting rings provide maximum table support area and significantly reduce adjustment effort, particularly during spindle swiveling. The newly developed, heavy-duty precision milling fence features two controlled axes for precise depth adjustment of the entire fence and an additional, independent depth positioning of the right (infeed) jaw. For comfortable access during curved milling operations, the fence can be completely swung away from the working area. Optionally, the Format4 profil 92 M e-motion can also be equipped with an electrically height-adjustable feed unit. Further technical data: Tool diameter: max. 250 mm Usable spindle height: 140 mm Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F milling spindle Ø 30 mm, 140 mm 118 650 mm "Integral" safety rulers 119 Table opening 255 mm with controlled eccentric supporting rings 183 Table extension on both sides 670 mm with 2200 mm pull-out frame 213 Electrically height-adjustable feeder support incl. horizontal tube 220 Parts list holder with A9 clipboard Benefits: Hodpfx Afjwztr Neaop - Highly efficient electrospindle with stepless speed control and HSK 63F interface - Positioning control for milling height and angle +/–46º - Positioning control for milling fence with offset - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric supporting rings (option) - Electric height adjustment for feeder unit on overhead column (option) Additional information: - The electrospindle is equipped with an HSK F63 quick-change system - Clamping range: 2–25 mm for OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm pull-out frame - Table opening 255 mm with controlled eccentric supporting rings

Stanje: rabljeno, L&L Machinery Inc GLU-ALL Visokofrekvenčna stiskalnica za lepljenje letvic, delovna površina mm. 2700x1300 Stransko nalaganje (ozka stran) Hodpjzcay Usfx Afasp Popolnoma opremljena z avtomatskim podajalnikom in izhodnim valjčnim transporterjem.

Stanje: zelo dobro (rabljeno), For sale: Professional METZ TS 8/8 fire pump, manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The unit is in very good visual and technical condition, sourced from a fire brigade. The pump is equipped with a Volkswagen type 122 engine, delivering 25 kW, renowned for its excellent durability and ease of maintenance. A big advantage is the low operating hours – approximately 66 engine hours, which is very low for equipment of this type. Technical data: • Manufacturer: METZ Feuerwehrgeräte GmbH Hedpfxsyt H R Uj Afajp • Model: TS 8/8 • Standard: DIN 14410 • Year of production: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump performance: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment: • Pressure and vacuum gauge • Engine hour counter • Work lighting • Fire brigade quick couplings • Transport frame • Manual choke and throttle control Applications: • Volunteer fire brigades / fire departments • Pumping water from ponds, rivers, and wells • Agricultural operations • Fire protection systems • Dewatering and water handling tasks Robust German construction – highly durable and easy to service.

Stanje: zelo dobro (rabljeno), Na prodaju profesionalne vatrogasne pumpe PFJ (PFJ Pumpen und Feuerlöschtechnik GmbH, Njemačka) model TS 8/8 DIN 14410. ⚙️ Tehničke specifikacije: Model: TS 8/8 DIN 14410 Kapacitet: 800 l/min Radni tlak: 8 bar Nazivna brzina vrtnje: cca 2725 o/min Godina proizvodnje: 2 komada – 1993, 32 radna sata, 98 radnih sati 1 komad – 1997, 164 radna sata Težina: cca 162 kg Proizvođač: PFJ GmbH Jöhstadt – Proizvedeno u Njemačkoj Hjdpoyyxiwofx Afajp 🔧 Tehničko stanje: Pumpe su ispravne, pale se i rade ispravno Uobičajeni tragovi korištenja (ogrebotine, oštećenja – vidljivo na fotografijama) Oprema rabljena, ali u dobrom tehničkom stanju Kompletne kao na fotografijama 📦 U setu: Motorna pumpa Upravljačka ploča Rasvjeta Elementi vidljivi na fotografijama 💡 Primjena: Vatrogasci / DVD Izvlačenje vode Industrijski i građevinski radovi Protupožarni sustavi ℹ️ Dodatne informacije: Cijena se odnosi na 1 komad Moguća kupnja kompleta Moguća dostava

Stanje: zelo dobro (rabljeno), For sale: TIG welder, L-TEC 200 DC, in very good condition. The price is per unit. Hedpfx Aoud R T Ssfajp

Stanje: zelo dobro (rabljeno), Simultaneous welding and plasma cutting capability. Output power: 400A/36V at 60% duty cycle, 310A/32V at 100% duty cycle. Hodpfjud Rl Usx Afaop

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, nosilnost: 4.000 kg, obremenitev mize: 4.000 kg, premer čelne plošče: 1.000 mm, 3-axis turning and tilting positioner with 4-ton load capacity Clamping plate: 1000 mm Hsdpfxowwinro Afajp Jib arm / radius: 2000 mm (more favorable price at 1500 mm) Height adjustment: min. 1250 mm – max. 2000 mm Turntable speed: 0.05 – 0.5 rpm Lifting speed (hydraulic): 1000 mm/min Rotational range: 360° Tilting range: ±360° Manual remote control (foot control available on request) Special equipment available

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.000 kg, obremenitev mize: 1.000 kg, 3-axis turn and tilt positioner, 1000 kg load capacity, clamping plate diameter 0.65 meters Hjdsxbh Dqopfx Afaop Height adjustment 1000 – 1500 mm For welding, assembly, machining, etc. With its stable and robust construction, flexible three-axis positioning including overhead capability, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces. Optimal workpiece positioning improves weld quality and supports the specified load in any position. The two endlessly rotatable axes and additional height adjustment enable all workpiece positions, including overhead. Turntable speed steplessly adjustable from 0.1 to 1.0 rpm. With wireless remote control Rotation range: 360° continuous Tilt range: 360° continuous Stroke: 1000 – 1500 mm Arm outreach radius: 1 meter

Stanje: novo, Leto izdelave: 2025, nosilnost: 2.000 kg, 3-axis rotary and tilting positioner, 2000 kg load capacity, clamping plate diameter 0.8 meters These units have proven their effectiveness in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in the aerospace and energy technology sectors. They are ideally suited for welding, assembly, machining, and related applications. Their sturdy and robust design, coupled with flexible three-axis positioning capability—including overhead positioning—and ease of operation, make them ideal for welding, assembling, and handling large workpieces. • Accelerates production and increases productivity • Optimal workpiece positioning improves welding quality and allows for higher deposition rates • Enhanced safety—dangerous crane operations are largely eliminated • Simultaneous positioning on up to three axes without the need for time-consuming clamping changes • Simple operation and ergonomic processing reduce operator fatigue and provide effective protection • Flexible, modular adaptation and custom special designs available Principle of operation: By arranging the load arm rotation axis above the clamping plate, the arm acts as a counterweight to the workpiece. As a result, these machines offer significantly greater performance than conventional rotary-tilt tables or rotary-tilt positioners. This design allows handling of the specified loads in any position. Thanks to the infinite rotation capability of both rotary axes and the additional elevation adjustment, all workpiece positions—even overhead—are possible. Hjdpfx Aexbhp Hjfaep • Steplessly adjustable turntable speed: 0.05 – 0.6 rpm • 2000 kg load capacity • Radio remote control included • Rotation: 360° continuous • Tilting: 360° continuous • Lift: 1000 – 1500 mm • Arm outreach radius: 1.2 meters

Stanje: novo, Leto izdelave: 2025, nosilnost: 1.000 kg, 3-axis turn and tilt positioner, 1000 kg load capacity, clamping plate diameter 0.65 meters Height adjustment 1000 – 1500 mm For welding, assembly, machining, etc. With its stable and robust construction, flexible three-axis positioning including overhead capability, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces. Optimal workpiece positioning improves weld quality and supports the specified load in any position. The two endlessly rotatable axes and additional height adjustment enable all workpiece positions, including overhead. Hedex Th Rwspfx Afaep Turntable speed steplessly adjustable from 0.1 to 1.0 rpm. With wireless remote control Rotation range: 360° continuous Tilt range: 360° continuous Stroke: 1000 – 1500 mm Arm outreach radius: 1 meter