Fliegl Vts 400 Rr nakup rabljenega (22.488)

Stanje: novo, številka stroja/vozila: ee3256d63dd23b3ad1bdf9ab0, lastna masa: 10.280 kg, največja dovoljena obremenitev: 13.720 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support legs 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps Quarter shell fenders in front of the 1st axle Excavator arm trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes rated at 5 t each in the excavator arm trough, positioned laterally on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear taper 1 storage box recessed into the gooseneck on the floor with lid, W=720 mm/ L=520 mm / D=170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed deck area, sloped for entry, length at bottom approx. 1600 mm, approx. 400 mm deep. Note! Main frame section 400 mm higher than wheel recess. 2nd pair of wheel recesses between the axles, recessed in the low-bed deck area, sloped for entry, length at bottom approx. 600 mm, approx. 300 mm deep. Note! Main frame section 300 mm higher than wheel recess. Removable wheel recess covers from the main frame, with wooden inserts. Distance from main frame longitudinal member to outside member approx. 1280 mm (wheel recess area) Extensions extendable to 3,000 mm, foldable at the wheel recess extensions (extensions not in the rear taper nor at the bottom of the wheel recesses) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber planks centrally on load area or underneath depending on technical feasibility 70 mm timber planks for extension to 3,000 mm Low-bed lashing points 1 pair of ring lashing points recessed in the gooseneck, each rated at 5 t 8 pairs of lashing mushrooms recessed in the top and side outer frame, each rated at 10 t 2 x at the front on the gooseneck 6 x in the low-bed – first lashing point 250 mm from the front, last maximum 250 mm from the rear, distance between lashing points not greater than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each rated at 5 t (can be converted to stake pockets) Drawbar Assembly for Turntable Trailer Drawbar with tested 50 mm towing eye, towing eye inclined at 8° Axles + Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Air suspension with lift & lower valve, separately operable at front and rear Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Gusdpfxji Ri I Ne Aa Ujc Braking System 2-line pneumatic braking system Spring-loaded parking brake Trailer info center, displays vehicle data (e.g., axle load—not a calibrated scale) and odometer Axle load detection via EBS-Canbus signal, for display in the cab (truck must be pre-equipped, not installed in truck, not a calibrated scale) Vehicle Stability System Duomatic coupling at the front with connecting line to the truck tractor EBS, electronic braking system with EBS socket at the front, with connecting cable Note: The trailer may only be towed by vehicles that ensure proper ABS function! Electrics 24 volts, multi-chamber LED lights with resistor, side marker yellow LED lights, LED license plate lights (Note: Certain towing vehicles may show diagnostic errors despite systems working correctly) 2 white front position lights in LED 2 white/red lane marker lights at the rear in LED Additional LED w

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT44001000966, lastna masa: 9.400 kg, največja dovoljena obremenitev: 30.600 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2010, dolžina tovornega prostora: 7.145 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 12.120 mm, skupna širina: 27.500 mm, skupna višina: 900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", barva: rdeča, These images are for reference only! Gross weight perm. / technical: 24,000 / 40,000 kg Payload perm. / technical approx.: 14,600 / 30,600 kg Axle load perm. / technical: 24,000 / 40,000 kg Unladen weight (base version) approx.: 9,400 kg +/- build tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low loader platform length in driving lane area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loading height in the low bed (loaded) approx.: 900 mm Tow height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium 1 plastic toolbox Gedoyxq A Hopfx Aa Ujuc Extendable widenings to 3,250 mm (not at rear bevel) (tracking width of transported construction machines or vehicles must not exceed outer frame width of 2,750 mm) Central storage compartment for wooden planks 70 mm wooden planks for widening to 3,000 mm 2 pairs of stake pockets in the low bed, integrated in the floor longitudinal beams Lashing rings, low loader: 2 pairs of lashing rings on the neck, each 5 t 1 pair of lashing rings in the rear bevel 4 recessed lashing rings, placed centrally in the floor 2 pairs of key slot profiles in the driving lane, for longitudinal guide rails and as additional lashing points 6 pairs of lashing mushroom anchors in the low bed outer frame, each 10 t 5 pairs of stake pockets in the outer frame of the low bed 4 additional pairs of 10 t lashing rings: 1 on the neck 3 recessed in the floor of the low bed Drawbar coupling, turntable trailer: Drawbar with tested 50 mm towing eye Axles + suspension: Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker leveling) Wheels and tires: 235 / 75 R 17.5" Steel rims, twin arrangement, factory silver Brake system: 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connection lines for towing vehicle ABS and ALB, with ABS connector at front, with connection cable Attention: The towed trailer may only be pulled by towing vehicles that ensure proper function of the ABS! Floor: Neck area with steel/chequer plate flooring then 70 mm softwood floor, wheel recesses with steel/chequer plate flooring Rear bevel with 70 mm softwood floor Access ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surface Hydraulically operated via tractor PTO Operating instructions: For 10,000 kg axle load, a special permit is required, only indivisible loads permitted!!! Note! Overlength and excess width, special permanent approval required. For applications for special permits for heavy-duty transport, an axle load display is required for air-suspended vehicles! This applies to all deviations from § 34 StVZO (axle load and permissible gross weight exceedance) that require a special permit under § 70 StVZO. The declared gross weight is technically feasible; depending on the load, the gross vehicle weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor driving and trailing behavior possible due to incorrect load distribution) These images are for reference only!

Stanje: novo, številka stroja/vozila: 408ba9a39bbb8087056d6e563, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Full-width rear mudflap Half-shell fenders on 1st and 2nd axle with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind 3rd and 4th axle Excavator arm recess over the rear axles, starting to the rear, approx. 1800 mm long, approx. 650 mm wide, and approx. 150 mm deep, 2 pairs of lashing holes each rated 5 t located laterally in the excavator arm recess in the main chassis, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (Padlock not included) 1 storage box let into the gooseneck in the floor with lid, w=720 mm/ l=520 mm / d=170 mm Extendable width to 3,000 mm (not at the rear bevel) (the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) 70 mm timber planks for widening to 3,000 mm Storage compartment for timber planks under the loading platform Lashing rings low-loader (40 lashing possibilities) 1 pair of lashing rings on gooseneck, each 5 t 9 pairs of lashing mushrooms recessed into the outer frame, top and side, each rated 10 t 2 x in the front on the gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated 5 t (for lashing strap hooks) 3 additional pairs of folding lashing rings, each rated 10 t 1 x inside beside the main frame at the beginning of the low-bed 1 x on the gooseneck (protruding) 1 x recessed into the floor behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 50 mm towing eye, towing eye inclined at 8°, D-value at least 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 manufacturer’s choice Steel rims, twin mounting, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, including connection lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable Godpfoi Ri Daex Aa Ujuc 1 LED beacon with holder, operated via parking light (beacon removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck at front with steel/chequer plate floor Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber decked Hydraulically operated via tractor PTO with restrictor, control located on the left side at the front Hydraulic connection with SVK connector NW 10/3, incl. connecting hose Registration Country/Plates Registration country: Germany 24/7 Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Warning plate according to ECE – 70 Paintwork Chassis hot-dip galvanized including passivation, 15-year warranty again

Stanje: novo, številka stroja/vozila: 55d3c5c03e032385649769b1b, lastna masa: 9.900 kg, največja dovoljena obremenitev: 14.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with heavy-duty slewing ring, integrated storage box incl. Turntable front structure Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps Extendable widenings to 3,000 mm (not at rear taper) (track width of the machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central compartment on loading area for timber planks 70 mm timber planks for widening to 3,000 mm Lashing points Low-loader 3 pairs of integrated lashing points, each rated to 10 t, at the front floor 6 pairs of mushroom lashing points, top and side integrated in outer frame, each 10 t 1 x at neck area remaining points distributed, distance no greater than 1,200 mm 1 x at rear taper 5 pairs of stake pockets integrated in the outer frame, internal size 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly for trailer turntable Drawbar with certified 40 mm towing eye Note: For 40 mm towing eye, the maximum permissible gross weight of the towing vehicle is 18,000 kg. Otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization front and rear (rocker compensation) Wheels and Tires 235 / 75 R 17.5 manufacturer's choice Steel twin wheels, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the truck ABS and ALB, with ABS connector at front, connection cable included Attention: The trailer may only be towed by vehicles that ensure ABS functionality! Gedpfxji Ri I Ej Aa Uouc Electrics 24-volt multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear lane marker lights 2 x 7-pin non-interchangeable connectors at the front, with connection cable 1 LED beacon with bracket, operated via parking lights (removable beacon) 2 pairs of warning boards, double LED-lit and extendable to 3,000 mm Floor Steel floor at front section thereafter 70 mm softwood floor, in wheel arch area with steel/chequer plate covering Rear taper with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable wooden inlays spring-assisted lifting Operating instructions Exception permit required for 10,000 kg axle load, only indivisible loads allowed!!! The specified total weight is technically possible. Depending on the cargo, the full gross weight may not be achieved while observing permissible axle/pin/support loads (poor tracking and handling may result from incorrect load distribution) Country of Registration / Plates Registration country: Germany 1 with Dekra inspection and report (according to §13 EC-FGV) 24/7 service hotline prepared for 2-line license plate holder Conspicuity markings with reflective strips acc. ECE R 048, white on the sides, red at the rear Paint Frame RAL 3002 Carmine Red 10 years warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Attention: Archive photos!

Stanje: novo, številka stroja/vozila: f79a9f15e7131d57a512793ab, lastna masa: 8.900 kg, največja dovoljena obremenitev: 15.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball race Foldable rear supports 2 wheel chocks with holders Side underrun protection, aluminium Rear spray guards across the full width Quarter fender before 1st axle Extendable outriggers up to 3,000 mm (not in the rear slope area) (Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber planks on the loading area 70 mm timber planks for extension to 3,000 mm Lashing points Low-bed 1 pair of lashing rings on gooseneck, each rated at 5 t 9 pairs of lashing mushrooms, flush-mounted on the top and side in the outer frame, each rated at 10 t 2 x front on gooseneck 7 x in the low-bed Guodji Ri Izopfx Aa Ujc 6 pairs of lashing holes in the outer frame of the low-bed, each rated at 5 t (for attaching tie-down straps) Drawbar System Turntable trailer Drawbar with certified 50 mm towing eye Axles & Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mount and mechanical axle load compensation (rocker balance) front and rear Wheels and Tyres 235/75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System 2-line air brake system Spring-loaded parking brake 2 swap-proof coupling heads at the front with connection lines to towing vehicle ABS and ALS, with ABS connector at the front and connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, side amber LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 LED beacon with holder, switchable by parking light (removable) 2 pairs of warning boards, double LED illuminated and extendable up to 3,000 mm 2 x 7-pin swap-proof plugs at the front, with connecting cable Floor Gooseneck at front with steel/chequer plate covering Thereafter 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood plated Hydraulic activation via auxiliary drive on tractor unit with throttle, operation on front left side Hydraulic connection with SVK connector NW 10/3, including connection hose Operating Instructions A special permit is required for an axle load of 10,000 kg; only indivisible loads possible!!! The specified gross weight is technically possible; depending on the freight, the permissible gross weight may not be achieved while respecting axle, support and kingpin loads. (Poor driving and trailing behaviour possible due to incorrect load distribution) Registration Country / Plates Country of registration: Germany With Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Included Prepared for double-line number plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Paintwork Frame DB 7350 Nova Grey 10-year warranty against rust-through Drawbar galvanised or black, at manufacturer’s choice Access ramps hot-dip galvanised

Stanje: novo, številka stroja/vozila: 15431365fe5515297a6a9fb05, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball-bearing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Full-width rear mud flaps Half-shell mudguards on 1st and 2nd axles with antispray mud flaps behind each axle, antispray mud flaps before and after 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points each 5 t located in the excavator arm recess on the side at the main frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, can be locked with a padlock (lock not included) 1 storage box recessed into the floor at the gooseneck, with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm 70 mm timber planks for extension to 3,000 mm Storage compartment for timber planks under the loading platform Lashing eyes (40 securing options) 1 pair lashing eyes on gooseneck, each 5 t 9 pairs lashing mushrooms integrated on top and side of outer frame, each 10 t 2 x on gooseneck to the front 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each 5 t (for tension belt attachment) 3 pairs of additional folding lashing eyes, each 10 t 1 x inside next to the main frame at the beginning of the low-bed 1 x on gooseneck (protruding) 1 x recessed behind the last axle Trailer towing device turntable Drawbar with tested 50 mm towing eye, towing eye inclined 8°, D-value min. 160 kN Axles + Suspension Drum braked axles Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance) front and rear Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, operated via sidelights (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel chequer plate covering Followed by 70 mm softwood floor, wheel arch area with steel chequer plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber overlay Spring-assisted lifting Country of registration / Plates Gedpfji Ri A Sex Aa Uouc Country of registration: Germany 24/7 service hotline Prepared for double-line licence plate holder Conspicuity marking with reflective strips according to ECE R 048, white at the side and red at the rear Warning panel according to ECE - 70 Coating Frame hot-dip galvanized incl. passivation, 15-year corrosion guarantee Drawbar galvanized or black, as per the manufacturer's choice Loading ramps hot-dip galvanized Attention! Archive pictures shown!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.500 kg, največja dovoljena obremenitev: 33.500 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 12.660 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, Tailor-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized individually according to customer specifications. Chassis Semi-Trailer for Containers Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions Container mounts: - 1 x 20 ft container centered without steel/chequer plate floor at the rear section - 2 x 20 ft or 1 x 40 ft with gooseneck tunnel - Without rear height adjustment and without foldable central supports; transportation of containers without tunnel is not possible. 24 t two-speed landing gear, single-side operation, with straight base, without push compensation 2 wheel chocks with holders Side underrun protection in aluminum Rear underrun protection in galvanized steel Half-shell mudguards with anti-spray mudflaps according to EU regulations Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm brake disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axle spacing offset mm (for intermodal transport) up to 44 t gross combined weight Air suspension Brake System 2-line compressed air braking system Color-coded line routing for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without interconnection line EBS electronic braking system with EBS socket at the front, without connecting cable Please note: The trailer must only be towed by towing vehicles that ensure proper ABS functionality! With lift & lower valve Vehicle Stability System Axle load detection via EBS CAN bus signal, for display in the driver’s cab (truck must be pre-equipped accordingly, no truck installation/no certified scale provided) Wheels and Tyres 385/55 R22.5, make according to manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, rear and brake lights in LED, lateral yellow LED lighting (Note: With certain towing vehicles, false diagnostics may occur, even though functionality is ensured) 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin, non-interchangeable sockets at the front, without interconnecting cable 2 additional LED work lights at the rear, operated via reverse gear Operating Instructions Note: Transport of filled tank containers is excluded! Country of Registration / Signs Germany with Dekra inspection and report (according to §13 EG - FGV) prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Gsdpfsi Riv Nox Aa Ujuc Paintwork Frame painted DB 7350 nova grey – 10-year corrosion warranty or hot-dip galvanized – 15-year corrosion warranty Tailor-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized individually according to customer specifications.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3.810 kg, največja dovoljena obremenitev: 34.190 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 12.660 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, Tailor-made Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are individually tailored to the customer’s specifications. Chassis Semi-Trailer for Containers Fine-grain steel welded construction, fifth wheel plate with interchangeable double king pin Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is excluded. Without height adjustment at the rear and without folding center supports, transport of containers without tunnel is not possible. Removable container guide at the front 24 t, 2-speed landing gear, single-sided operation, straight base, without compensating bearing Wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Half-shell mudguards With anti-spray mudflaps according to EC regulations Rear impact guard Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned – reduces tire wear and fuel consumption Axle spacing offset mm (suitable for combined transport) for up to 44 t gross train weight Air suspension 1st axle: automatic lift axle including forced lowering and starting aid; activated by braking three times (starting aid operational up to 30% axle overload and up to max. 25 km/h) Brake System 2-line compressed air brake system, color-coded lines for easy servicing. Spring-loaded parking brake Godpfoi Ri Ayjx Aa Ueuc 2 confusion-proof coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connection cable Note: This trailer may only be towed by tractors that guarantee ABS functionality! Raise & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab (truck must be pre-equipped, not included) Wheels and Tires 385/55 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, LED rear and brake lights, yellow side LED lighting 2 white front position lamps 2 white/red lane marker lights at rear 1 x 15-pin socket at the front, without connection cable Side-mounted LED work lights on both sides (activated via reversing light) Additional LED work light(s) at the rear, activated via reversing light Operating Notes The specified gross weight is technically possible; depending on the cargo, the gross weight may not be achievable when adhering to the permitted axle, support, and fifth wheel loads. Special permit required if total train length exceeds 16,500 mm Attention: Transport of filled tank containers is excluded! Registration Country / Signs Germany With Dekra certification and report (per §13 EC-FGV) Prepared for single-row license plate holder Warning panel per ECE-70 Contour marking with reflective tapes per ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Nova grey *10 years warranty against rust-through* or hot-dip galvanized *15 years warranty against rust-through* Support legs coated in black Tailor-made Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are individually tailored to the customer’s specifications.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.800 kg, največja dovoljena obremenitev: 28.200 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.200 mm, skupna širina: 2.550 mm, skupna višina: 2.645 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are customized to individual customer specifications. Chassis - Semi-Trailer for Freight Forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin, mounting positions for warning signs at the rear, outer frame with load-lock profile for lashing strap attachment, 24 t two-speed landing gear, single-sided operation, ferry lugs marked in yellow (two at the rear as towing eyes), container locks: 4 pairs of container lock fittings recessed in the floor for either 2 x 20-foot or 1 x 40-foot containers, stake pockets recessed in the outer frame (internal dimension 80 x 80 mm), central stake pockets recessed in the floor (internal dimension 80 x 80 mm), plug-in stanchions B=80 / D=80 / L=1200 mm, hot-dip galvanized, lashing eyes recessed into the outer frame (each rated at 5 t), 2 toolboxes approx. W=1,230 / H=450 mm, fully enclosed, mounted across the full width in front of the axles, replacing side underrun protection, foremost container lock as removable pin, lashing/stanchion rails transversely recessed in the floor across the full width up to the outer frame, approx. 100 mm high, 20 mm round steel rails, top and bottom, spacing between upper and lower rail approx. 60 mm, bottom finished with angle plate, half open downwards. For lashing and inserting 80 x 80 mm stanchions, open compartment for warning boards (as technically feasible). Axles & Suspension SAF disc brake axles (axle/chassis laser-aligned) to reduce tire wear and fuel consumption, air suspension, 1st axle is an automatic lift axle, including forced lowering and traction aid, activated by 'braking 3 times', 2 ride heights adjustable via hand control: - 1 x for coupling height 1120 mm - 1 x for coupling height 1200 mm Brake System 2-line compressed air brake system, color-coded piping for easy service, spring brake parking brake, 2 non-interchangeable connectors at the front, EBS (Electronic Brake System) with EBS socket at the front, with lift & lower valve, vehicle stability control system. Wheels and Tyres 385/65 R 22.5", steel rims, factory silver finish Electrics 24 Volt, 4 x 3-chamber tail lights, side LED marker lights (yellow), 2 white LED front position lights, 2 rear LED lane-keeping lights (white/red), 2 x 7-pin and 1 x 15-pin non-interchangeable front sockets, without supply cables Rotating beacon with holder, controlled via parking light (removable lamp) 2 pairs of double warning signs, LED-lit, extendable to 4,500 mm and removable with plug. Additional bracket at the rear Additional 7-pin socket (ISO 1724) on rear underrun protection Floor Phenolic plywood approx. 30 mm thick, cross joints with omega inserts, installed on longitudinal stringers, for high point load resistance (forklift axle load up to 7,100 kg max) Front Wall / Corner Posts 25 mm aluminium hollow section, 1,650 mm high, front corner posts in volume version steel Inside of front wall additionally lined with 1,250 mm high phenolic plywood "Crash-Blocker", inner lower section (approx. 140 mm high) with steel impact protection Storage compartment for 80 x 80 mm plug-in stanchions inside front wall Painting Guedjzb Iu Depfx Aa Usc Frame: Hot-dip galvanized including passivation, or painted as per customer specification Landing gear feet: Black coated Front corner posts: Galvanized and painted to match front wall color Front wall:

Stanje: rabljeno, prva registracija: 06/2018, Leto izdelave: 2018, Fliegl ZWP 180, 2-osá lafeta s výměnnou nástavbou KRONE BDF – mrazicí skříň CARRIER SUPRA 850 hlubokomrazicí agregát !! K dispozici 4 kusy !! Fliegl lafeta ZWP 180 ● První registrace: 06/2018 ● Rozměry vozidla: 9 150 mm x 2 480 mm (d x š) ● Plně vzduchově odpružená ● Zvedací / spouštěcí zařízení ● ABS ● 2x vzduchově odpružená BPW náprava, 9 t Krone WR 7.3 S BDF výměnná mrazicí skříň ! Jako nové ! ● První registrace 06/2016 ● ATP / FRC prodlouženo do 2029! ● Hliníková podlaha s rýhovaným profilem ● 2 x 2 kotvicí lišty na bočních stěnách ● Skříň s výklenkem pro mrazicí agregát Gujdpezbdg Ajfx Aa Uoc ● Vnitřní rozměry skříně: 7 250 x 2 470 x 2 400 mm (d x š x v) ● 2 zadní portálové dveře se 4bodovým otočným zámkem CARRIER SUPRA 850 Easycold chladicí agregát ● 3 900 mth ● DIESEL – elektro (380 V) ● Externí dieselová nádrž ● Teploměr ● Dálkové ovládání ● Externí baterie - Německá vozidla! - První majitel! - STK / SP: na přání a za příplatek: nové!! Možnost omylu a mezitímního prodeje vyhrazena! = Další informace = Celková povolená hmotnost: 18 000 kg

Stanje: rabljeno, konfiguracija osi: 2 osi, dolžina tovornega prostora: 62.000 mm, širina tovornega prostora: 24.900 mm, višina nakladalnega prostora: 3.800 mm, Leto izdelave: 2020, Oprema: ABS, = Další možnosti a výbava = - Vzduchové pérování vzadu - Vzduchové pérování vpředu = Poznámky = V případě dotazů na vozidlo Vám rád pomůže pan Seidel (telefonicky). Fliegl TPS 119 valník Vzduchové pérování, tažné oko 40 mm, Duomatic, nápravy GFA, ABS Knorr, pružinové brzdy, nájezdové rampy, celková povolená hmotnost: 11 900 kg, pohotovostní hmotnost: 3 250 kg, užitečné zatížení: 8 650 kg, rozměry ložné plochy: D 6 200 mm Š 2 490 mm V 380 mm, vzorek pneumatik: 1. náprava 10 mm, 2. náprava 10 mm Na vyžádání Vám rádi zpracujeme leasingovou nebo financovací nabídku. Pan Seidel (telefon) Vám rád pomůže. Další informace naleznete na našich webových stránkách. ... Omyl, změny a mezitímní prodej vyhrazeny!!! - = Další informace = Pohotovostní hmotnost: 3 250 kg Užitečné zatížení: 8 650 kg Gsdsy Ada Tjpfx Aa Ujuc Celková hmotnost: 11 900 kg Poslední kontrola: 07/2026 Pro více informací kontaktujte pana Tobiase Eberta.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34202034509, lastna masa: 4.790 kg, največja dovoljena obremenitev: 33.210 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 12.660 mm, skupna širina: 2.550 mm, skupna višina: 1.150 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, barva: rdeča, 3-axle container semi-trailer Gooseneck Type: SDS 420 Rigid 40" Chassis Semi-trailer for containers Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions Container mounts: 1 x 20-foot centered without steel/chequer plate flooring at the rear 2 x 20-foot, 1 x 40-foot with gooseneck tunnel Front crossmember with folding locks (not available for front extension), supplied free of charge Transport of filled tank containers is excluded. No rear height adjustment and no foldable center supports, transport of container without tunnel not possible. 24 t, 2-speed landing gear, single-sided operation, with semi-round lower part for compensation Make: Jost 2 wheel chocks with holders Side underrun protection Rear underrun guard Half-shell mudguards With anti-spray flaps according to EC Rear impact guard Axles + Suspension BPW drum brake axles Gjdpfx Aszazznoa Ueuc "Axle/chassis laser alignment" Reduces tire wear and fuel consumption Axle spacing 1310/1410 mm Air suspension Braking system 2-line compressed air brake system Colored pipe layout for easy service Spring-loaded parking brake 2 fail-safe coupling heads in the front, without connecting line EBS make Haldex, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lifting & lowering valve Vehicle stability system Axle load detection via EBS CANbus signal, for display in the driver's cab, truck must be prepared accordingly – not installed (no calibrated scale) Wheels and tires 385/55 R22.5" Make Fulda with M+S marking Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable 2 additional LED work lights, rear both sides, switched via reversing light Operating instructions Note: Transport of filled tank containers is excluded! Registration country / plates Germany With Dekra inspection and certificate (according to §13 EG - FGV) Prepared for single-line number plate holder Warning plate according to ECE - 70 ADR warning plate at rear, foldable Contour marking with reflective strips according to ECE R 048, yellow on the sides and red at the rear Paintwork Frame RAL 3020 Traffic red "10-year warranty against rust-through" Landing legs black coated

Stanje: dober (rabljeno), Technical data for the extension brackets: Manufacturer: Jung Heinrich Type: MPB Scope of delivery: 02x extension brackets, used Total length: approx. 400 mm Total width: approx. 129 mm Internal width: approx. 121 mm For frame profile width: approx. 120 mm Depth: approx. 49 mm Material thickness: approx. 4.00 mm Hole spacing (depth): approx. 100 mm Hole pattern (width x height): approx. 85 x 100 mm Drill hole diameter: approx. 10 mm Material colour: blue Weight per piece: approx. 2.59 kg Gedeipt Ddepfx Aa Usuc Note: No fastening material included in the scope of delivery.

Stanje: rabljeno, prevoženi kilometri: 102.356 km, moč: 115 kW (156,36 KM), prva registracija: 05/2022, vrsta goriva: dizel, skupna masa: 3.500 kg, velikost pnevmatike: 195/75R16C, gorivo: dizel, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, prostornina tovornega prostora: 14 m³, Oprema: ABS, AdBlue, airbag, centralno zaklepanje, dvižna zadnja plošča, električno nastavljivo ogledalo, klimatska naprava, računalnik na krovu, servovolan, tempomat, Special features - Cruise control - Air conditioning - Electric windows - Electrically adjustable and heated mirrors - On-board computer - Radio - Airbag - Power steering - Central locking with remote control - ABS Gusdpfx Aey S Scbea Uoc - ASR (traction control) - Reversing camera - 6 new tires - Multifunction steering wheel - Spare wheel - Carrier DataCOLD 300 temperature data logger Body Deep-freeze body by LAMBERET: - Internal dimensions: 3.5 x 2.05 x 1.95 m (L x W x H) - Volume: 13.99 m³ - Side door - Interior lighting - Anti-slip floor Carrier Pulsor 400 refrigeration unit: - Evaporator - Standby and night operation on 230V - During driving, the unit operates with its own diesel engine Tail lift: Dhollandia DHLM.08 - Load capacity 500 kg - Remote control For sale is an Iveco Daily 35C16, equipped with a premium deep-freeze box body from the renowned French manufacturer Lamberet. The body stands out for its robust construction, excellent insulation properties, and well thought-out functionality – ideal for professional refrigerated transport. In addition, the vehicle is equipped with a Carrier DataCOLD 300 temperature data logger, ensuring reliable monitoring and documentation of cargo temperature during transport. The vehicle is ready for registration. German documents and TÜV inspection are included in the price. Available in stock in Langenfeld! ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. All photos used are original, taken directly at our facility – ensuring full transparency regarding the actual vehicle condition. Before sale, all our vehicles undergo comprehensive reconditioning in our in-house specialist workshop – covering mechanics, bodywork, and paint. This ensures optimal preparation for the next technical inspection. We also guarantee the accuracy of the stated mileage. Trust is good – control is better: Upon request, the vehicle can be inspected by independent bodies such as TÜV, DEKRA, or KÜS – also as part of a remote inspection. Our services for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export license plates - Customized financing and leasing options - Trade-in of your current vehicle - Installation of additional equipment on request Looking for something specific? If you do not currently find a suitable vehicle for your company in our inventory, please contact us – we are happy to assist you. For technical details, additional photos, or personal consultation, we are always at your disposal. All prices quoted are net prices. The contents of our website have been created with the greatest care and are regularly updated. Nevertheless, they are for general information only and do not constitute individual advice. Only the information stated in the purchase contract is binding. Changes, errors, typographical mistakes, and prior sale reserved.

Stanje: novo, Leto izdelave: 2025, Working width: 380 mm Working height: 250 mm 1st unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive 2nd unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive Both units with oscillation: yes Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Gjdov R U Ifopfx Aa Uouc Machine width: 900 mm Weight: 500 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, The Rhule MGR 400 refrigerated mixer is an industrial solution designed for mixing, marinating, and vacuum processing food products. It is used in production to homogenize preparations while controlling temperature, particularly in meat processing lines. This ensures consistent quality and better absorption of ingredients. Thanks to its system combining mixing, vacuum, and cooling, the Rhule MGR 400 optimizes production performance. Vacuum processing improves marinade penetration, while the cooling system maintains thermal stability of the product. As a result, it directly contributes to improved material yield and batch consistency. Additionally, the variable speed mixing arms allow precise adjustment according to the type of product. The machine integrates easily into a food processing line upstream of packaging or cooking. Its large capacity allows the processing of significant volumes while maintaining homogeneous quality. Moreover, its stainless-steel design and closed system guarantee a high level of hygiene, which is essential in industrial environments. Finally, the Rhule MGR 400 refrigerated mixer is part of an optimized production strategy. It combines technical performance, precise parameter control, and reduced product loss. When refurbished, it represents a strategic solution for maintaining high productivity while controlling investment costs. Godpfx Aasy Ew Snj Uouc Technical specifications: - Vacuum pump - Bowl capacity: 400 L - Usable volume: approx. 300 L - Power supply: 400 V – three-phase - Frequency: 50 / 60 Hz - Power: approx. 8.9 kW - Mixing arm speed: up to 25 rpm - Vacuum system: up to 90–95 % - Integrated cooling system (refrigerant type R404A / R452a) - Hoist lift capacity: 400 kg - Dimensions: approx. 2900 × 2800 × 3000 mm - Weight: approx. 1400 kg U-7aepnk

Stanje: dober (rabljeno), Ventilator za odsesavanje prahu, odsesavanje izpušnih plinov, odsesavanje varilnega dima, odsesavanje, ventilator, tlačni puhalnik, vakuumski puhalnik, radialni ventilator, prezračevalno puhalo, radialno puhalo, puhalnik, ventilator -Ventilator: puhalnik/radialni ventilator, dvojna izvedba brez pogona -Ventilatorsko kolo: 2x Ø 400 x 380 mm -Dolžina osi: pribl. 1230 mm -Moč motorja: predvidena za 0,55 do 7,5 kW -Pogonska os: Ø 30 mm, dvokanalna klinasta jermenica Ø 235 mm, glej slike -Količina: na voljo 2 puhalnika -Cena: na kos -Mere: 1470/600/H690 mm Godpex Exnwsfx Aa Uouc -Teža: 65 kg/kos

Stanje: rabljeno, Dust extraction blower, exhaust extraction, welding fume extraction, extraction system, ventilator, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan - Manufacturer: Haier, fan blower for air conditioning unit - Model: lKFD-35-1 - Voltage: 220 V / 35 W - Fan wheel: Ø 400 mm - Overall dimensions: 400/190/H530 mm - Weight: 3.3 kg Godpfx Aeuu U Txea Uouc

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, – poljska izdelava – zelo dobro stanje – DTR dokumentacija – leto izdelave: 2010 – vibrirni žleb – autoreverz TEHNIČNI PARAMETRI: – širina vhoda: 400 mm – višina vhoda: 120 mm – glavni motor: 37 kW – pogonski motor: 2 x 1,5 kW – 2 noža – sito: 50 mm x 50 mm – vibrirna dovalna miza (d/š): 4500 / 430 mm – moč vibrirnega žleba: 3 kW – zgornja pogonska zobata vpenjalna gred – spodnja pogonska zobata vpenjalna gred – hidravlični pokrov pogonskih gredi – premer rotorja: 400 mm – dolžina rotorja: 430 mm Gjdpfx Aaow H Rp Ns Ujuc – mere (d/š/v): 650 x 200 x 190 cm – teža: ~ 2500 kg

Stanje: kot nova (razstavni stroj), MIG/MAG varilni stroj s inverter tehnologijo Trofazno napajanje, varilni stroj - Vključno z Master Software TERRA PME Tehnični podatki Napajanje Napetost (50/60 Hz): 3x400 ±15% Maksimalna vhodna moč: 22,9 kVA Maksimalni vhodni tok: 31,1 A Faktor moči PF: 0,73 Učinkovitost: 89% Počasna varovalka: 25 A Napetost v prostem teku: 61Vdc IP zaščita: IP23S Izolacijski razred: H Napajalni kabel: 4x3mm2 - 5 m Varjenje Nastavitveni razpon: 3-400A Delovni cikel MIG/MAG - 40 °C: 40% - 400A 100% - 330A Gjdpfx Aaew Rm Sao Ueuc Delovni cikel MIG/MAG - 25 °C: 100% - 400A Premer žice: 1,0-1,2 mm (opcijsko 0,6-1,6) Premer polnjene žice: 0,9 - 2,4 mm Premer aluminijaste žice: 0,8 - 1,6 mm Hitrost podajanja žice: 0,5 - 22,0 m/min Premer koluta žice: Ø 200/300 mm Daljinski upravljalnik: da

Stanje: zelo dobro (rabljeno), vrsta goriva: dizel, barva: rumena, dvižna višina: 18.000 mm, tip droga: teleskopski, Leto izdelave: 2019, obratovalne ure: 664 h, General Information Year of manufacture: 2019 Technical Specifications Number of cylinders: 4 Drive: Wheeled Unladen weight: 14,300 kg Functional Mast: Telescopic (3 sections) Mast length: 18 m Lifting capacity: 4,000 kg CE certification: yes Condition Technical condition: very good Visual condition: very good DIECI PEGASUS 40.18 400 EX DEMO TELEHANDLER YEAR OF MANUFACTURE 2019 DRIVE 4X4X4 MAX. LIFTING CAPACITY 4000 KG MAXIMUM LIFTING CAPACITY AT 15.3 METERS 500 KG MAXIMUM WORKING HEIGHT 18 METERS ADDITIONAL HYDRAULIC FUNCTIONS 400° ROTATION TYRES 405/70/20 2X JOYSTICK CONTROL 1X REMOTE CONTROL CE CERTIFICATE KUBOTA ENGINE TYPE: V3800-T 4 CYLINDERS 101 HP WATER COOLING TRAVEL SPEED 30KM/H PALLET FORK HOOK TYPE: BUB 2448 OWN WEIGHT 60 KG MAX. CAPACITY 4000 KG LARGE HYDRAULIC WINCH TYPE: BUD 4475 OWN WEIGHT 410 KG MAXIMUM CAPACITY 3000 KG BUCKET VOLUME 1.20 M3 ONLY 664 DEMO HOURS!!!!! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH Gedjuxrv Tjpfx Aa Uouc

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 2.800 kg, največja dovoljena obremenitev: 7.700 kg, prva registracija: 07/2010, Leto izdelave: 2010, Tandemski nizkopodni priklopnik FLIEGL TPS100 Leto izdelave: 2010 Prva registracija: 07/2010 Nosilnost: 7.700 kg Lastna teža: 2.800 kg - Dolžina nakladalne površine: 5 metrov - Notranja širina: 2,49 metra - Dolžina ramp: 3,10 metra Guodpfjzb E E Hjx Aa Usc - Širina ramp: 0,50 metra - Višina stranic: 0,40 metra - Višinsko nastavljiva vlečna sklopka - Razdeljene rampe - D-homologacija! - Tehnični pregled veljaven do 1/2027! - Takoj pripravljen za uporabo! - Originalni lak! (ni očiščen – ni lakiran) Prodajna cena: 10.900,-- neto Možnost ugodne dostave!

Stanje: rabljeno, lastna masa: 5.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2018, skupna dolžina: 2.550 mm, skupna višina: 13.100 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, Fliegl 30-foot tipping chassis | BPW axles | Lift axle | Alloy wheels | Excellent condition | Austrian vehicle Gujdpfxeyp Hd Hj Aa Usc

Stanje: rabljeno, lastna masa: 3.690 kg, največja dovoljena obremenitev: 9.810 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 09/2019, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 48 m³, vzmetenje: zrak, velikost pnevmatike: 285/70R19,5 148J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 285/70R19,5 148J, velikost zadnje pnevmatike: 285/70R19,5 148J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Lashing points, , -- Printing errors, mistakes and changes reserved, sample images --, More data at: !, More Details: ! Guedpfezc Uyiox Aa Uoc

Stanje: rabljeno, največja dovoljena obremenitev: 28.560 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 12.032 mm, širina tovornega prostora: 2.352 mm, višina nakladalnega prostora: 2.698 mm, prostornina tovornega prostora: 68 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2023, Oprema: ABS, FLIEGL 3-axle fixed container chassis with 40 FT high-cube container First registration: 2023 Permissible total weight (technical): 38,000 kg Chassis unladen weight: 3,640 kg High-cube container unladen weight: 5,800 kg Guedpfx Aasvzk Nas Uec SAF axles with large 430 mm disc brakes 1st axle: LIFT AXLE with start-up aid with vehicle driving stability system Axle load detection Tyres: 6 x 385/55 R 22.5 40 FT high-cube container, right side wall with multiple wing doors (can be opened), door dimensions L 2,340 x W 2,585 mm Rear portal doors Internal dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm Volume: 68 m³ 25 Euro pallets Accessible with pallet truck and forklift Condition: grade 1-A RENTING is the new BUYING – also available from us as a full-service rental.