Fliegl Fliegl Tsk 100 4,5M nakup rabljenega (26.836)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 2.860 kg, največja dovoljena obremenitev: 7.040 kg, skupna masa: 9.900 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing support Gear support leg at the front Foldable rear support 2 wheel chocks with holders Hsdji Ri Eiepfx Agijnk Steel underrun protection Full-width rear mudflap (not with forklift holder) Quarter-shell mudguards Lockable storage compartment for loading ramps underneath the load bed 1 pair of ramps, 3,000 mm long, 360 mm wide, load capacity per pair 4,000 kg (ramp hooks at the rear) Central axle trailer coupling Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension GFA or BPW axles (at manufacturer's discretion), with tapered roller bearings and S-cam brakes Axle/chassis laser aligned to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and automatic axle load equalization (rocker balance) Wheels and Tyres 235 / 75 R 17.5 as per manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system, color-coded lines for easier service Manual spindle parking brake Integral air reservoir ABS and ALB, with ABS socket at front, including connecting cable Note: The trailer may only be towed by trucks that ensure ABS functionality! 2 non-interchangeable coupling heads at front, incl. connecting lines to towing vehicle Electrics 24 V system, multi-chamber rear lights, side-mounted amber LED lighting 2 white front marker lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable plugs at the front, incl. connecting cable Hydraulics Three-way tipping system, hydraulic multi-piston press with lift limit and safety wire Low-pressure cylinder up to max. 170 bar, no throttle (to be retrofitted to the truck if needed) Hydraulic connection with SVK plug NW 10/3, incl. hose Operated hydraulically via truck PTO Tipping Body Robust tipping body with 4 mm steel floor, steel side boards, continuous and fold-down side walls (non-swiveling), no lower central locking. Rear corner stanchions removable, rear wall fold-down and swiveling, lower central locking. Platform length approx. 4,500 mm, side walls with 5 bottom hinges Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 t Operating Instructions Specified gross weight is technically possible, but due to type of cargo and compliance with permissible axle, support, and kingpin loads the maximum gross weight may not be achievable. (Poor driving and tracking behavior may occur due to improper load distribution) Registration/Country Plates Country of registration: Germany With Dekra inspection and certificate (per §13 EG-FGV) 24/7 service hotline Prepared for single-line license plate holder ECE R 048 compliant contour marking with reflective strips, white sides and red rear Paintwork Frame hot-dip galvanized including passivation, 15-year warranty against rust-through Sideboards/body RAL 9010 pure white Note: Tipping body interior is only primed unless painted version ordered! Attention: Archive photos shown. With 5 m body ALSO available IMMEDIATELY!

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT21201011556, lastna masa: 3.300 kg, največja dovoljena obremenitev: 8.200 kg, skupna masa: 11.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 450 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, barva: rdeča, These images are archive photographs; the vehicle may still be in use! Further information: Steel welded design, continuous tipping shaft at the rear with 80 mm ball bearing mount. Gearbox support leg at the front, foldable rear support, 2 wheel chocks with holder, steel underrun protection, full-width rear mudflap, quarter-shell fenders, spare wheel (same make as main tires), steel rim, unattached, 1 plastic toolbox with shelf, dimensions w=620/h=360/d=440 mm, lockable with a padlock (padlock not included). Note: When folded down, the sideboard touches the toolbox. Lockable storage compartment for loading ramps beneath the bed. 1 pair of aluminum ramps, 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg (ramp mounting bar at the rear). Drawbar with tested 40 mm towing eye, height-adjustable via spindle, maximum adjustment range 300 mm. BPW drum brake axles, axles/chassis laser-aligned for reduced tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation). Hnjdpfx Aolhpzvogisk 2-line air brake system. Color-coded wiring for easy servicing. Manual spindle parking brake, integral air tank, ABS and ALB, with ABS connector at the front and connecting cable. Note: The trailer may only be towed by vehicles capable of ensuring ABS functionality. 2 non-interchangeable couplings at the front with connecting lines to the towing vehicle. 24 Volt, multi-chamber lights, amber LED side lights, 2 white position lights at the front, 2 white/red lane marker lights at the rear. Two 7-pin, non-interchangeable connectors at the front with connecting cable. Three-way tipper system, hydraulic multi-piston press with stroke limiter and safety cable. Low-pressure cylinder rated up to 170 bar, non-throttled. Throttle to be retrofitted on the truck if required. Hydraulic connection with SVK plug NW 10/3, including connecting hose. Operation via truck PTO-driven hydraulics. Robust tipping bed with 4 mm steel floor, steel drop-side construction, continuous side walls, foldable and pendulum mounted with bottom central locking. Removable corner stanchions at the rear. Rear wall foldable and pendulum mounted with bottom central locking. Flatbed length approx. 5,000 mm, side walls with 6 bottom hinges, flatbed width 2,420 mm. 5 pairs of lashing rings in the floor, each rated for 5 tons. Country of registration: Germany, with Dekra inspection and appraisal (according to §13 EC - FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT21201012268, lastna masa: 3.240 kg, največja dovoljena obremenitev: 8.560 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, prva registracija: 05/2022, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, velikost pnevmatike: 235/75 r17,5, barva: zelen, obratovalna teža: 3.240 kg, Further information Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical bearing, gearbox support foot at the front, foldable rear support, wheel chocks with holder, steel underrun protection, full-width rear mudflaps (not in combination with forklift mounting), quarter-shell fenders, spare wheel (same make and specification as basic tyres), steel rim, loose, plastic toolbox with shelf, width=620 / height=360 / depth=440 mm, lockable with padlock (padlock not included). Note: Sideboard touches toolbox when folded down. Lockable storage compartment for loading ramps beneath the loading platform. Pair of aluminium ramps, 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg (hook-in ramp rail at rear). Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm. BPW drum brake axles, axles/chassis laser-aligned to reduce tyre wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker balancing). 2-line air brake system, colour-coded pipe layout for easy servicing, hand spindle parking brake. Integral air reservoir, ABS and ALB, with ABS connector at front, with connection cable. Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS. Duomatic connection at front with connecting line to the truck. 24 volt, multi-chamber lights, side-mounted yellow LED lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, one 15-pin connector at the front with connection cable. Three-way tipper body, hydraulic multi-piston press with lift limiter and safety cable, low-pressure cylinder up to max. 170 bar, without restrictor (can be retrofitted to the truck if required). Hydraulic connection with SVK plug NW 10/3, including connecting hose. Hydraulic operation via truck PTO. Robust tipping platform with 4 mm steel plate floor, steel sidewall construction, continuous side panels, foldable and pendulum-mounted with central locking at the bottom. Removable corner posts at the rear. Rear panel foldable and pendulum-mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side panels with 6 hinges at the bottom. Sideboard retraction springs (not possible with split side panels). Platform width 2,420 mm, pair of lashing eyes in floor, each 5 tons. Operating notes: The stated gross weight is technically feasible, but depending on the load, the gross weight may not be achievable whilst adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour possible due to incorrect load distribution) Country of registration: Germany, with Dekra inspection and report (according to §13 EC-FGV), 24/7 service hotline, prepared for one-line licence plate holder, contour marking with reflective stripes according to ECE R 048, white on the sides and red at the rear. Hnodpok E Tdasfx Agijk

Stanje: rabljeno, številka stroja/vozila: WFDFLT21001012243, lastna masa: 2.500 kg, največja dovoljena obremenitev: 8.000 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/2022, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2022, Further information Chassis: Central axle trailer, low-bed Fine-grained steel welded construction, gearbox support foot at the front, telescopic rear support, wheel chocks with holder, steel fenders over both wheels Coupling system: Central axle trailer Drawbar with certified 40 mm towing eye, height-adjustable by spindle, max. adjustment range 250 mm Axles & Suspension Euro axles of our choice, with tapered roller bearings and S-cam brake, axles/chassis laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Brake system 2-line compressed air brake system, spring-actuated parking brake, 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by vehicles which ensure the effectiveness of the ABS! Electrics Hnedpfx Agjqmc Rasiok 24 volt, multi-chamber tail lights, yellow LED side marker lights, 2 white position lights at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin plug at the front, with connection cable. Deck TTS Low-mounted steel trough, deck floor made from steel/chequer plate, steel sidewalls solidly welded to the floor, deck length 5,500 mm, trough with Load-Lock profile at the front and sides for lashing strap attachment (8 pieces at the front, 16 pieces on each side) Note: Slight floor warping may occur due to welding distortion! Pair of lashing rings: 1 x at each front corner of the steel trough and 1 x at the rear in the floor, each rated at 5 tons. Additional pair of lashing rings in the floor, each rated at 5 tons. Drive-on ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with grip handles on the ramps, wood-clad, with gas struts for single-operator handling Operating notes The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to the permissible axle, support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG - FGV), prepared for single-line licence plate holder, contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear.

Stanje: novo, Galvanised Pallet Racking for Outdoor Use Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 100.16 linear metres - Load capacity: 3,000 kg per bay - Uprights hot-dip galvanised - Beams 270 x 14 x 5 cm, T30 - Beams hot-dip galvanised - Brand new BLT / PR45 HDG - Manufactured in Europe & tested to the current DIN EN 15512 standard. - 100% quality at the best price. Racking set consists of: - 37 x uprights, approx. 450 cm x 110 cm, pre-assembled. - 144 x beams, approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - 288 x safety bolts M8 x 20 incl. nuts. - Levels: floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Hjdpfxsy A H S Ee Agienk Price: €19,900 net Plus legally applicable VAT. You will receive an invoice showing the VAT separately. Transport: Delivery is carried out upon request by our partner forwarding agent; costs depend on postcode. Assembly: Our trained personnel are at your disposal for professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in the realisation of your projects, from planning to ordering and installation. Customer note: When installing the safety pins/bolts, holes that have become blocked due to galvanisation may need to be redrilled. This unfortunately cannot be completely ruled out with high-quality hot-dip galvanising. If you have any questions, please feel free to contact us.

Stanje: novo, številka stroja/vozila: 06b624786df9f4b5c196a36b0, lastna masa: 3 kg, največja dovoljena obremenitev: 11 kg, skupna masa: 14 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 285 / 70 r 19,5, Further information Chassis Central axle tipping trailer Steel welded construction, continuous tipping shaft at rear with 80 mm ball tipping bearing Hnsdpfxoi Ri Ips Agiok 2-speed gear support leg at the front Foldable rear support Wheel chocks with holder Steel underride guard Rear splash guards across the full width Quarter shell mudguards Lockable storage compartment for loading ramps beneath the loading area Drawbar device for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker compensation) Wheels and Tires 285 / 70 R 19.5 Manufacturer’s choice Steel rims, factory silver Braking system 2-line air brake system Spring-actuated parking brake 2 interlock-proof coupling heads at the front, with connecting lines to the tractor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrics 24 Volt, multi-chamber lamps, yellow side LED lighting 2 white position lights in front 2 white/red lane marker lights at the rear All lamps in LED version (Note! With certain towing vehicles, diagnostic errors may occur, although functionality is ensured) 1 x 15-pin plug at the front, with connecting cable Hydraulics Three-way tipping system, hydraulic multi-piston press with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without flow restrictor. If required, this must be retrofitted on the truck. Operation hydraulic via truck PTO Hydraulic connection with SVK plug NW 10/3, including connecting hose Tipper body Sturdy tipping body with 4 mm steel plate floor, steel drop sides, continuous, foldable and pendulum-mounted with central locking at the bottom. Corner stanchions at the rear plug-in. Tailgate foldable and pendulum-mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 bottom hinges. Side wall return springs (not possible with split side walls) Rear wall pendulum-mounted and as 2-wing door (not foldable), with door retainer and side protective rubber Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 t Country of registration / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, white on side and red at rear Paintwork Frame hot-dip galvanized including passivation; 15-year warranty against rust-through Side walls/body RAL 3002, carmine red Note! Body inside only primed! Attention: Archive images!

Stanje: novo, številka stroja/vozila: dd98a7658922be8f2e25bcadb, lastna masa: 2 kg, največja dovoljena obremenitev: 8 kg, skupna masa: 10 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r 17,5, Further information Chassis Central Axle Trailer Low-bed Fine-grain steel welded construction Telescopic support leg at the front Telescopic rear support 2 wheel chocks with holders Steel mudguards over both wheels Central axle trailer coupling equipment Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & Suspension Euro-axles (manufacturer’s choice), with tapered roller bearings and S-cam brakes Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5 (manufacturer’s choice) Factory silver steel rims Braking System 2-line compressed air braking system Spring-loaded parking brake 2 mistake-proof coupling heads at the front, with connection lines to the towing vehicle, ABS and ALB, with ABS plug at the front, including connection cable Note: The trailer may only be towed by vehicles that ensure proper ABS function! Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white marker lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin mistake-proof plugs at the front, including connection cable Body TTS Low-mounted steel trough, bridge floor made of steel/chequer plate covering, steel sidewalls solidly welded to the floor Bridge length 4500 mm; trough at the front and sides with load-lock profile for attaching lashing straps (8 points in front, 12 per side) Note: Slight floor waviness possible due to welding distortion! 2 pairs of lashing rings, one at the corners of the steel trough front and one at the rear floor, each rated 5t 2 additional pairs of lashing rings in the floor, each rated 5t Ramps Steel ramps, 2300 mm long, 510 mm wide, laterally adjustable, with hand grip on the ramps Wooden covering Gas spring assist for one-man operation Operating instructions The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable while observing the permissible axle/load and saddle loads. (Poor driving and tracking performance possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany Hnedpfx Aei Ri Ebogiek With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Outline markings with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame RAL 3002 Carmine red Ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: bdf30cb8a53c70e900bdb40a7, lastna masa: 2 kg, največja dovoljena obremenitev: 9 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: -, Further Information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing Gear support foot at the front 2 wheel chocks with holders Steel underrun protection Full-width rear mudflap Quarter-shell mudguards Lockable storage compartment for loading ramps beneath the load platform Central axle trailer drawbar system Drawbar with certified 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker equalization) Wheels and Tires 235 / 75 R 17.5 manufacturer's choice Steel rims, factory silver Braking System 2-line air brake system with color-coded piping for easy service. Manual spindle parking brake Integral air tank Hnedsi Riwiepfx Agiok ABS and ALB, with ABS plug at the front, including connection cable. Note: The trailer may only be towed by vehicles that guarantee ABS functionality! 2 non-interchangeable coupling heads at the front, with connecting lines to the truck Electrics 24 Volt, multi-chamber lighting, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Hydraulics Three-way tipping system, hydraulic multi-piston cylinder with stroke limiter and safety cable Low pressure cylinder up to max. 170 bar, without restrictor. If required, the restrictor must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Tipping operated hydraulically via truck PTO Tipper Body Robust tipping platform with 4 mm steel sheet floor, steel side wall construction, continuous side walls, foldable and swinging with central locking at the bottom. Removable rear corner stanchions. Rear wall foldable and swinging, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 bottom hinges. Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated for 5 tonnes Operating Notes The specified gross weight is technically feasible; depending on the cargo, the gross weight might not be attainable while complying with permissible axle/support/kingpin loads. (Poor handling or tracking may result from incorrect load distribution) Registration/Country & Plates Country of registration: Germany with Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation 15-year anti-corrosion warranty against rust-through Side wall/platform RAL 3002 Carmine Red Rear support, loading ramps, and toolbox are optionally available at additional cost Note: Archive images

Stanje: zelo dobro (rabljeno), Profesionalni držala priznane znamke GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – premer vpenjanja Ø6 mm, dolžina 100 mm. • Stožec SK40 – CNC standard • Premer vpenjanja Ø6 mm • Dolžina držala 100 mm • Največja hitrost vrtenja 25.000 obr/min • Visoka natančnost in stabilnost vpenjanja • Rabljeno, delujoče, pripravljeno za uporabo. -- PODANA CENA ZA 1 KOS -- Hnsdpfx Aow Sy D Ejgisk

Stanje: novo, številka stroja/vozila: 074630ca1b8dc2d710f82c15a, lastna masa: 3.980 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Hsdpfxei Ri H So Agionk Chassis – Semi-Trailer Tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Curved front end – patented Without landing gear Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holder, stone-repellent surface Tow hook at rear Axles + Suspension SAF disc brake axles Axles/chassis laser alignment reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and traction aid, activated by 3x braking (traction aid active up to 30% axle overload and max. speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, color-coded hoses for easy maintenance Spring-loaded parking brake 2 interchangeable couplings at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractors capable of ensuring ABS functionality! With raise & lower valve Vehicle electronic stability program Wheels and Tires 385/65 R22.5, brand at manufacturer’s discretion Polished aluminum rims, brand at manufacturer’s discretion Electrics 24 volt, multi-chamber rear lights, yellow LED side markers 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin sockets at front, no connecting cables Hydraulics Low pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, NW 48 mm (no hose connection) Operation hydraulic via truck PTO Body Aluminum box body made from high-grade, wear-resistant alloy; front wall 5 mm thick, external side walls made from 30 mm hollow section profiles, neatly welded, with bulk material-repellent top rail profile. Inside with ladder at front wall (not together with Cramaro system). Shovel and broom holders mounted externally on front wall. Greenline – conical and aerodynamic body shape Membrane – rear wall Rear wall as pendulum flap with double-joint hinge, external, double hook locking. Rear wall with rubber seal. Note: Heat resistant up to max. 170°C! Floor continuous 5 mm thick, Brinell 110. Note: Only suitable for transport of sand, gravel and round aggregate with max. grain size up to 20 mm! Warranty excluded for all other goods! Standing platform with ladder, terminal plate for air/electric connections and brake with large clearance for optimum accessibility. Roll tarp stored on right (FR-right), with central locking on left (FR-left). Operating instructions For salt, lime etc. transports, we recommend a tipping cylinder with hard chrome-plated piston rod to prevent corrosion. The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable while respecting permitted axle, coupling and king pin loads. (Incorrect load distribution may cause poor driving and trailing behavior) Revolution Link: Revolution Link user report: Registration Country / Registration Plates Germany With Dekra inspection and certificate (according to §13 EC – FGV) 24/7 service hotline Prepared for single-line number plate holder Reflective contour markings according to ECE R 048, white at sides, red at rear Paintwork Frame DB 7350 nova gray Body R

Stanje: novo, številka stroja/vozila: 357314e4e176f8758d11ba42b, lastna masa: 4.500 kg, največja dovoljena obremenitev: 30.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2-inch kingpin Patented curved front section Central telescopic support leg, uncoupling with load not possible; when uncoupled, the vehicle must be positioned with a rearward slope. 2 wheel chocks with holders Folding underrun protection Half-shell mudguards Integrated mudguard bracket, stone-repellent surface With anti-spray splash flaps only on the last axle 1 tarpaulin support bar with holder 2 towing hooks at the rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Axles in off-road configuration Air suspension 1st axle automatic lift axle, including forced lowering and traction aid, activated by braking three times (traction aid functional up to a 30% axle load exceedance and to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Brake System 2-line compressed air braking system, color-coded lines for easy maintenance Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, without connection cable Note: The towed vehicle may only be towed by towing vehicles that ensure the function of ABS! With lift & lower valve Vehicle - Driving Stability System Automatic tipping lowering with shut-off valve Wheels and Tires 385/65 R22.5, brand at manufacturer's discretion Steel rims, factory silver Electrics 24 volts, multi-chamber lights, yellow LED side lighting 2 white position lights at the front 2 white/red lane marker lights at the rear Two 7-pin foolproof sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Bodies Aluminum box body made of high-quality, wear-resistant material; front wall 5 mm thick, with external wall panels made of 30 mm hollow chamber profiles, neatly welded, with bulk material-repellent top rail profile. Access inside at the front wall (not in combination with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic body shape Membrane rear wall Rear wall as swinging tailgate with double hinge, externally mounted with double hook locking. Rear wall with rubber seal Note: Heat resistant up to max. 170°C! Floor throughout 6 mm thick Access platform with steps, connection plate for air/electric and brakes with ample free space for optimal operability Hjdpfx Agoi Ri R Ioionk Roll tarp can be stored on right side (FR-right), with central locking on (FR-left) Operating Instructions For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion caused by the material. The specified total weight is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and coupling loads. (Poor handling and tracking due to incorrect load distribution possible) Registration Country/Plates Germany Certification in accordance with EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tapes in accordance with ECE R 048, white on the sides and red on the rear.

Stanje: rabljeno, največja dovoljena obremenitev: 1.979 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prva registracija: 03/2026, dolžina tovornega prostora: 3.070 mm, širina tovornega prostora: 1.530 mm, višina nakladalnega prostora: 350 mm, skupna širina: 1.660 mm, skupna višina: 660 mm, A39 GW26GA00010, Hjdpsyn Ucusfx Agionk Zadnji prekucnik proizvajalca STEMA, tip ROCKO II SHRK .2, skupna masa: 2.700 kg, letnik 2022, z inercijsko zavoro, visoki nakladalec, zadnji prekucnik z aluminijasto stranico, hidravlično prekucanje, z zadnjimi nihajnimi vrati. Pridržujemo si pravico do napak in predhodne prodaje.

Stanje: rabljeno, Leto izdelave: 2014, Industrijski robot Proizvajalec: Kuka Tip: KR210 R3100 ultra s 4,5 m linearno osjo Leto izdelave: 2014 Doseg: 3.196 mm Teža: 1.154 kg Nosilnost: 210 kg Kuka krmiljenje KRC4 Leto izdelave: 2014 Teža: 163 kg Programska oprema: KSS 8.5.4 Kuka TouchPad KCP4 Kuka povezovalni kabli Kuka linearna os Hsdpfxsxuwlwj Agisnk Tip: KL1500-3 T Leto izdelave: 2013 Dolžina: ca. 4,5 m Korak: ca. 3,5 m Kabelski nosilec KRC4 Teža: 2.200 kg

Stanje: novo, Leto izdelave: 2025, nosilnost: 10.000 kg, dvižna višina: 4.500 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 3.750 mm, kapaciteta baterije: 808 Ah, napetost baterije: 80 V, dolžina vilic: 2.400 mm, lastna masa: 15.186 kg, Oprema: kabina, FRIEDMANN FORKLIFTS – PROFESSIONALLY REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD Our forklifts are fully reconditioned according to FEM-4.004 and the latest safety standards – ensuring maximum quality and your safety. From frame to battery, drive, brakes, steering, and electrics – every vehicle undergoes thorough inspection and restoration. ? Made in Germany – with responsibility and precision ? Strict technical inspection ? 400+ units available ? Worldwide shipping & customs clearance ? Service & spare parts at fair prices ? Personalized support – even after purchase Test and get a consultation on site – we will find the right solution for you. Industrial Truck Data: Hnsdpfxeyrm R Se Agisk Manufacturer: Heli Model: Counterbalance Forklift CPD100-G3-4 Drive type: Electric Load capacity: 10,000 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 4,500 mm Mast type: Duplex Free lift: No Overall height: 3,750 mm Fork length: 2,400 mm Unladen weight: 15,186 kg Tyres: Solid rubber Model type: CPD100-G3-4 Battery type: Lithium-ion Voltage: 80V Ah: 808 Ah Cabin type: Full cabin – front, roof & rear window + steel doors (suspended) Lighting: 2x front working lights Lighting: 1x rear working light Lighting: Rotating beacon Lighting: Equipment as per StVO for possible use in (restricted) public road traffic: indicators, rear lights, reversing lights, reflectors, etc. Attachment: Sideshift Attachment: Fork positioner.

Stanje: novo, Leto izdelave: 2025, nosilnost: 10.000 kg, dvižna višina: 4.500 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 3.650 mm, dolžina vilic: 2.100 mm, lastna masa: 12.800 kg, Oprema: kabina, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN OPERATION. Our forklifts are reconditioned according to FEM-4.004 and the latest safety standards – ensuring maximum quality and your safety. From the chassis to the battery, including drive unit, brakes, steering, and electrics – every vehicle is thoroughly inspected and refurbished. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test on-site now and receive expert advice – we’ll find the right solution for you. Industrial Truck Specifications: Manufacturer: Heli Type: Counterbalance Forklift CPCD100-G3-CU Drive type: Diesel Load capacity: 10,000 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 4,500 mm Hnsdpfeyrm Rxsx Agisk Mast type: Triplex Free lift: No Overall height: 3,650 mm Fork length: 2,100 mm Unladen weight: 12,800 kg Tyres: Solid rubber Model designation: CPCD100-G3-CU Cab type: Full cabin – front, roof & rear window + steel doors (suspended) Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Lighting: Road equipment according to StVO for potential operation on public (restricted) roads: indicator light, tail lamp, reverse light, reflector etc. Attachment: Side shifter Attachment: Fork positioner Attachment: Additional hydraulic circuit – routed to fork carriage

Stanje: pripravljen za uporabo (rabljen), Nord SK71L/8-2 geared motor with SK12063AZ-71L/8-2 gearbox, SN: 201892085-100, used, in good condition, fully functional, scope of delivery as per photos. Hodpfx Ast Rmztjgienk

Stanje: zelo dobro (rabljeno), Weiss Weiss Climate Test Chamber WKL 100/70 -70°C to +180°C, Humidity 100 Liters Compressor has been replaced!! Air-cooled For sale is a professional climate test chamber from Weiss Umwelttechnik. This device is ideally suited for material testing, climate testing, as well as temperature and humidity simulation in industrial settings, laboratories, or R&D departments. The test chamber enables precise testing conditions ranging from extreme temperatures to high humidity levels. Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in workspace center: ± 0.3 to ± 1 K Spatial temperature uniformity (reference to set value in range tmin to +150°C): ± 0.5 to ± 2 K Temperature change rate Heating: 3.5 K/min Cooling: 3.5 K/min Heat compensation: max. 700 W Specifications for climate testing: Humidification system data: Tank capacity: approx. 13 l Water quality: demineralized pH value: 6 – 7 Conductivity: max. 20 μS/cm Water consumption at constant temperature +40°C, 92% RH: 2 l / 24 h Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature fluctuation in workspace center: ± 0.3 to ± 0.5 K Spatial temperature uniformity (to set value): ± 0.5 to ± 1.5 K Temporal humidity deviation in workspace center: = 1 to ± 3 % RH Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1776 mm, Width 745 mm, Depth 980 mm Mechanical loading data: Maximum load of chamber floor: 10 kg Per shelf: 10 kg Total shelf loading capacity: 50 kg Operational data: Chamber illumination: Halogen bulb 24V, 50W Rated voltage: 1/N / PE AC 230V ±10% 50 Hz Rated power: 3.5 kW Hedpeyw Nnfjfx Agienk Rated current: 15.2 A Fuse (external): 16A slow Protection category: Control cabinet IP 22 and control panel IP 54 Heat dissipation for air-cooled test chambers: Max. heat output to environment: 2,500 W Noise measurement: Sound pressure level (free-field measurement at 2 m from front and 1.0 m height): approx. 59 dB(A) Port: Feed-through: 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerant: R404A / R23 Chamber volume: approx. 100 liters Weight: 210 kg Important information for you as a buyer for your safety! The following steps are performed in advance on our offered chambers: 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) For further questions, we are happy to assist you by phone.

Stanje: novo, Leto izdelave: 2026, premer žaginega lista: 315 mm, Obseg rezanja okroglega jekla pri 90°: 100 mm, trajanje garancije: 12 meseci, hitrost žaginega lista: 80 obr/min, Območje rezanja kvadratnega jekla pri 90°: 80 mm, Oprema: dokumentacija / priročnik, Fully Automatic Straight Cutting Tube and Profile Sawing Machine Product Overview The fully automatic straight cutting tube and profile sawing machine is engineered for precise, fast, and repeatable 90° cutting of round tubes, square, and rectangular profiles in industrial production lines. Thanks to its servo motor and ball screw-driven material feed system, hydro-pneumatically operated saw head, and PLC-controlled touch screen, it delivers stable cutting quality and high production efficiency. Key Features • Fully automatic straight cutting tube and profile sawing machine • Servo motor and ball screw-controlled material feeder • Adjustable and controlled cutting speed with hydro-pneumatic saw head • PLC-controlled touch screen interface • Single-pass feeding and cutting up to 1000 mm • Multiple feeding capability for lengths over 1000 mm • Ability to cut 4 different lengths from the same material • Dual-speed motor for optimal speed selection according to material properties • High-performance, double helical gear reducer system Cutting Capacity (Tube & Profile) • Maximum Saw Blade Diameter: 315 mm • Cutting Angle: 90° (±45° optional) • Round Tube: Max. Ø 100 mm • Square Profile: Max. 80 × 80 mm • Rectangular Profile: Max. 110 × 80 mm • Minimum Crop Length: 120 mm Technical Specifications • Main Voltage: 400 V • Control Voltage: 24 V • Installed Power: 3 kW Hnjdpfeyg H S Sjx Agiek • Current: 10.2 A • Saw Motor: 1.8 – 2.2 kW • Coolant Pump: 0.09 kW • Air Pressure: 6 kg/cm² (240 l/min) • Saw Speed: 40 / 80 rpm • Cutting Angle: 90° Saw Blade Specifications • Blade Diameter: 315 mm • Bore Diameter: 32 mm • Drive Pin Holes: 2 × Ø11 Coating Options: • TiN: Medium hardness steels • TiCN: High rigidity steels • TiAlN: Stainless steels Machine Dimensions & Weight • Width: 1900 mm • Length: 1400 mm • Height: 1600 mm • Net Weight: 620 kg • Gross Weight: 650 kg

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), SICA SOCKETING MACHINE .1.T. 100-500 For KG-U PVC pipes, Pipe lengths: 0.5m, 1m, 2m, 5m, 6m Year of manufacture: 1997 1 socket per cycle Socketing tools for: 250mm - 315mm - 400mm sewer pipe Hnjdpfx Agovfyntsiek The socketing machine is in good condition, ready for operation.

Stanje: zelo dobro (rabljeno), CTS Type: CS-70/1000-5 Water-cooled Condenser For sale is a high-quality climate and temperature chamber / environmental test chamber manufactured by CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is designed to simulate a wide range of environmental conditions and is typically used in industry, research, and quality assurance. It allows precise testing under extreme temperature and humidity conditions, ideal for: - Material testing - Aging tests - Electronics and component testing - Climate and environmental simulations Thanks to its large test chamber (1000 liters) and powerful control system, both rapid temperature changes and long-term constant tests can be conducted. The system is water-cooled, ensuring stable and efficient operation. Technical specifications: Control: - Multi-touch controller with integrated program generator - Programmable test sequences Side port: 50 cm / 125 cm Temperature range: - Temperature range: –70°C to +180°C - Heating rate: approx. 6 K/min - Cooling rate: approx. 5 K/min - Temperature constancy: ± 0.3 K Climatic data (humidity): - Climate temperature range: +10°C to +95°C - Humidity range: 10% to 98% RH - Humidity constancy: - Range I: ± 1.5% RH - Range II: ± 3% RH - Dew point range: - I: +7°C to +94°C - II: –10°C to +7°C Dimensions: - External dimensions (HxWxD): 1950 x 1270 x 2245 mm - Internal dimensions (HxWxD): 900 x 1000 x 1100 mm - Test chamber volume: 1000 liters Electrical data: - Connection: 400 V, 3/N, 50 Hz - Tolerance: +6% / –10% - Connected load: approx. 16.4 kW - Nominal current: approx. 26.8 A Cooling system: Hedpfx Agsyxmi Aoisnk - Refrigerant: R404A & R23 - Weight: approx. 900 kg Important information for your safety as a buyer: The following procedures are carried out in advance on the chambers we offer: 1. Functional checks and replacement of necessary components 2. If required, a new fill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and errors.) If you have further questions, we will be happy to answer them by phone.

Stanje: skoraj kot novo (rabljeno), Popolnoma obnovljen Cena: 5.500 EUR Spiralni mešalnik za testo Kapaciteta: 100 kg moke 160/180 kg testa Hjdpfx Asx N Ed Tegisnk Diosna Prostornina posode: 260 litrov Električna moč: 380V / 50Hz / 3N/PE Dva časovnika Dve hitrosti Možnost vzvratnega hoda Polovični pokrov z varnostnim stikalom Kolesa z zavorami

Stanje: rabljeno, lastna masa: 6.520 kg, največja dovoljena obremenitev: 23.480 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 8.610 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/140J, velikost zadnje pnevmatike: 235/75R17,5 ---/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Low-bed loading area length approx. 6.50 m, total loading area length approx. 8.60 m, loading height approx. 900 mm. This vehicle is being offered on behalf of a bank. -- Subject to typographical errors, mistakes, and changes. Sample images -- Hnsdpfsy Di Ulsx Agiek More data at: ! More details: !

Stanje: rabljeno, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2019, dolžina tovornega prostora: 7.200 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R19,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 445/45 R19,5 160J, velikost zadnje pnevmatike: 445/45 R19,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Printing errors, mistakes and changes excepted, sample images shown. For more details, visit: ! Hnedpfx Ajy Di Tnogisk

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902024288, lastna masa: 6.075 kg, največja dovoljena obremenitev: 32.925 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 50 odstotek, barva: modra, Leto izdelave: 2018, The images are for reference only! The vehicle may still be in use! Chassis Semi-Trailer Forwarding Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly inclined with "Load-Lock profile" for lashing strap attachment Note! To attach straps in combination with side walls, the side walls must be opened! 24 t 2-speed landing gear, single-side operation, with straight lower section, without push balancing Pull-out ladder at the rear Side door retainers 2x wheel chocks with holders Attention! Only Chassis No. 2024286 - 89: Pallet box for 30 Euro pallets (ground clearance approx. 220 mm) Galvanized steel underrun protection Quarter shell mudguards in front of and behind axle assembly with anti-spray flaps in accordance with EU regulations Rear impact protection Plastic toolbox with drawer and shelf, width=650 / height=520 / depth=670 mm, can be locked with a padlock (padlock not included) Axles & Suspension SAF axles "Axles/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension 1st axle is an automatic lift axle, including forced lowering and start-up aid, activation by "braking 3x" (Start-up aid functions up to 30% axle overload and up to a speed of max. 25 km/h) Braking system 2-line compressed air brake system, color-coded tubing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, no connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Warning: The trailer may only be towed by towing vehicles that ensure proper ABS operation! with raise & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5, manufacturer at the manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber rear lamps, yellow LED side lights 2 white position lamps at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, no connecting cable Front wall / front corner posts 2, 580 mm high, corner posts in volume steel design, release device for side curtain at front wall "Crash blocker", steel rear impact protection inside lower section at approx. 140 mm height Center posts 3 pairs of sliding stanchions, moveable along the entire length, with quadruple stake pockets and long bottom pocket 3 pairs of stanchion positions Rear wall / rear corner posts Rear corner posts steel up to lower edge of roof, curtain hook feature with round tube and curtain tensioning ratchet Rear portal doors, double-wing with 2 internal rotating bar locks each Curtain Curtain with integrated horizontal and vertical belts Hsdpfxjy Dfpre Agijnk Tension locks in stainless steel Roof Sliding roof, end-lift at the rear foldable, tarpaulin can be moved from rear to front, tarpaulin color: white Optimized rain gutter at the rear, on the end cross member above the doors Operating notes When assembling a tractor-trailer combination, ensure compliance with the legally permitted overall vehicle height! If the total height exceeds 4,000 mm, please pay special attention to the following: The transport contractor is liable for any damages incurred. The transporter must obtain their own permit according to §29 StVO. We assume no liability for the transfer of vehicles. The images are for reference only! The vehicle may still be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902026582, lastna masa: 6.500 kg, največja dovoljena obremenitev: 28.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2020, velikost pnevmatike: 445/45 r19,5, Further information The images shown are archive images; the vehicle may still be in use! Hjdpfx Agoqhiyxsionk Chassis, Semi-Trailer, Freight Forwarding Fine-grained steel welded construction with preload (light pre-tensioning) in the neck area, fifth wheel plate with replaceable 2" kingpin PRO SLIDE, additional sliding plate at the front for protection during coupling Outer frame slightly beveled with Load-Lock profile for attaching tie-down straps Note! To attach the straps in combination with drop sides, the drop sides must be opened! 24 t, 2-speed landing gear, single-sided operation, with semi-circular bottom section and straight mounting plate, with shear compensation Note: Free landing leg edge dimension or free swing radius to the rear approx. 1930 mm 1 pair of gearbox supports at the rear, with straight bottom section and single-sided operation on the right (FR) Extendable ladder at the rear Side door retainers Wheel chocks with holders Side underrun protection, aluminum Rear underrun protection, galvanized steel Quarter-shell mudguards in front of the 1st axle and behind each axle With anti-spray mudflaps behind each axle Heavy Blocker rear bumper across the width + roller impact buffers on the sides Heavy-duty pallet stop, bolted on both sides, approx. 15–20 mm high, with lashing points every 200 mm. Loading height reduced by approx. 15–20 mm Plastic toolbox, with drawer and shelf, w = 650 mm / h = 520 mm / d = 670 mm, lockable with a padlock (padlock not included) Storage compartment for 16 insert posts, on one side left (FR), below load floor Axles & Suspension BPW disc brake axles with 370 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Rear loading height in raised position approx. 1200 mm (truck air suspension lowered to approx. 910 mm coupling height) Without lift axle Brake System 2-line compressed air brake system Color-coded hose routing for easy servicing Spring-type parking brake Duomatic coupling at the front, without connecting hose EBS by Wabco-E, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure ABS functionality! With lift & lower valve + auto-reset function Vehicle Stability System Ramp start assist (Wabco), tailGUARD with 3 ultrasonic sensors at the rear Electrics 24-volt, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin mistake-proof sockets at the front, without connecting cables Reversing camera system with color flat-panel monitor, wireless transmission to screen, monitor with suction mount and power supply via 24-volt vehicle socket Floor Phenolic plywood panels approx. 30 mm thick, fitted on longitudinal supports for high point load capacity (up to max. 7100 kg forklift axle load) Heavy duty floor in the rear area over approx. 1800 mm Rear area fitted with steel/aluminum checker plate over approx. 300 mm (slightly projecting) Front wall / corner stanchions 2,580 mm high, corner stanchions in high-volume design, quick-release for side curtain at the front wall Crash Blocker: lower inside area with steel impact protection at approx. 140 mm height Central Stanchions 3 pairs of sliding stanchions adjustable along the entire length, with quadruple insert slots and long bottom slot 3 stanchion positions per side Insert Slats Wooden insert slats Additional row