Faccin Rcm1 nakup rabljenega (35)

Stanje: pripravljen za uporabo (rabljen), Stroj za upogibanje profilov Faccin Bedsy Abz Uepfx Aiqedh

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, številka stroja/vozila: plate roll Faccin, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 180 mm, premer zgornjega valja: 200 mm, premer stranskega valja: 160 mm, premer valja: 200 mm, dolžina valja: 2.050 mm, delovna širina: 2.000 mm, delovna višina: 700 mm, najv. debelina pločevine: 8 mm, najv. debelina jeklene pločevine: 8 mm, maks. debelina pločevine iz nerjavečega jekla: 8 mm, maks. debelina aluminijaste pločevine: 10 mm, maks. debelina medeninaste pločevine: 12 mm, najv. debelina bakrene pločevine: 12 mm, skupna masa: 3.700 kg, skupna dolžina: 3.500 mm, skupna širina: 1.100 mm, skupna višina: 1.000 mm, moč: 5,52 kW (7,51 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 3, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, STROJ ZA UPOGIJANJE PLOČEVIN FACCIN – 4 VALJNI, HIDRAVLIČNI, 2000 X 8 MM MODEL 2020B4, leto izdelave 2020, zmogljivost 2000 x 8 mm Valji za upogibanje, hidravlične linearne vodila. Stroj je v odličnem delovnem stanju. Zmogljivost upogibanja: - Širina pločevine: 2000 mm - Debelina upogibane pločevine: 8 mm - Debelina pločevine pri predhodnem upogibanju: 6 mm Dimenzije valjev: - Uporabna dolžina: 2050 mm - Zgornji valj: 200 mm - Spodnji valj: 180 mm - Stranski valji: 160 mm Bdodpfozy Nv Eox Aiqjh Električni motor 5,5 kW, napetost 400/50 V • Kaljenje 4 valjev za povečanje trdnosti površine. • Osrednji valji se poganjajo s hidravličnimi motorji in prestavami. • Stožčasta nastavitev za upogibanje, stranski valji se nagibajo za oblikovanje stožcev. • Sprednji, hidravlični odpiralni del za enostavno razkladanje upognjene konstrukcije. • Spremenljiva hitrost delovnega valja, hidravlična hitrost upogibanja: hitro/počasi. • Konzola z električnim upravljanjem na kolesih, osrednji nadzor z ročkami in 3 digitalnimi zasloni. • Digitalni zasloni za prikaz položaja valjev, ponovljivost upogibanja in predhodnega upogibanja. • Dimenzije: 3500 x 1100 x V 1000 mm – teža 3700 kg.

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), skupna masa: 11.500 kg, skupna širina: 1.950 mm, skupna višina: 1.650 mm, največja dolžina izdelka: 4.200 mm, Valjarna za upogljanje, izdelana leta 2006. Ta naprava FACCIN 4HEL 2134 omogoča maksimalno širino pločevine 2.100 mm in maksimalno debelino pločevine 28 mm. Opremljena je z linearnimi vodili in ima zgornji valj premera 350 mm. Če iščete visokokakovostno valjanje, razmislite o stroju FACCIN 4HEL 2134, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Geometrija: linearna vodila • Maks. širina pločevine: 2.100 mm • Maks. debelina pločevine: 28 mm • Premer zgornjega valja: 350 mm • Premer pritrdilnega valja: 330 mm • Premer stranskega valja: 240 mm • Moč glavnega motorja: 18,5 kW • Hitrost valjanja: 7 m/min • Posebnost: vizualni/digitalni prikazovalnik položaja valja Bdsdpozylh Dsfx Aiqjh • Zmogljivost valjanja: • Skupna širina: do 25 mm valjanje / 20 mm predhodno upogibanje pri Ø 1.700 mm, 260 N/mm² • Skupna širina: 20 mm / 16 mm pri Ø 400 mm, 260 N/mm² • Skupna širina: 20 mm / 16 mm pri Ø 1.700 mm, 360 N/mm² • Skupna širina: 18 mm / 14 mm pri Ø 400 mm, 355 N/mm² • Polovična širina: do 30 mm valjanje / 25 mm predhodno upogibanje pri Ø 1.700 mm, 260 N/mm²

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, številka stroja/vozila: 18105876-5772, premer gredi: 360 mm, premer valja: 800 mm, skupna masa: 46.000 kg, skupna dolžina: 4.500 mm, skupna širina: 4.850 mm, skupna višina: 3.750 mm, obratovalna hitrost: 6 mm/s, Certificirane osi, izdelane iz kovanega zlitinskega jekla NiCrMo + zaščitene s sistemom za nastavitev višine (PHAS) Sistem za hitro spreminjanje konfiguracije upogljalnih valjev (tehnologija TIMS) Bdsdewayt Ropfx Aiqoh Stranski vodilni valji, nastavljivi v 6 smereh, z vsemi hidravličnimi krmilnimi elementi Brezstopenjska nastavitev hitrosti vrtenja in sočasno gibanje osi Upravljalna stikala na osrednje premikajoči se upravljalni plošči

Stanje: dober (rabljeno), Leto izdelave: 2000, številka stroja/vozila: 21977-1964, Ponudba 26165 Tehnični podatki Bdsdpfozf Hkdox Aiqeh - dva gnana valja, vsak valj hidravlično nastavljiv - za predkrivljenje in konično valjanje - upravljanje z ločene upravljalne plošče, z digitalnim prikazom dejanske vrednosti - in ročnim upravljanjem - največja delovna širina 1300 mm - največja debelina pločevine pri 400 N/mm² brez predkrivljenja - pri upogibnem premeru 370 mm znotraj 30 mm - s predkrivljenjem pri upogibnem premeru 370 mm znotraj 25 mm - brez predkrivljenja pri upogibnem premeru 380 mm znotraj in - širini 370 mm 45 mm - premer zgornjega valja vsak 300 mm - premer stranskega valja vsak 310 mm - delovna hitrost 4,5 m/min - pogon 400 V / 30 kW - potrebna površina Š 5800 x V 1900 x G 2200 mm - teža 8500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Tehnični podatki: Delovna širina: 2100 mm Moč upogibanja: 28,0 mm Globina upogiba: 22,0 mm CNC-nadzor Premer zgornjega valja: 350 mm Premer srednjega valja: 330 mm Premer stranskih valjev: 240 mm kaljeni valji stožčasta upogibna naprava, dosežena s poševno postavitvijo obeh stranskih valjev mobilna upravljalna konzola z digitalnim prikazovalnikom Moč motorja: 7,5 kW Označitev CE Dimenzije (dolžina x širina x višina): pribl. 3600 x 1500 x 1500 mm Teža: pribl. 14,5 tone Prodajalec ne odgovarja za tiskarske ali prenosne napake. Stroj je glede na starost v dobri optični in tehnični kondiciji ter glede obrabe; rabljeni stroji se prodajajo brez kakršnih koli garancij. Bdodpfxsx Dtt As Aiqeh

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, Four-Roll Plate Bending Machine Make: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Technical specifications Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Lower roll diameter: 210 mm Side rolls diameter: 165 mm Bending force (against top roll): 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4.2 t Performance Data Rolling capacity (full width) mm: 12 Pre-bending capacity (full width) mm: 8 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 260 Rolling capacity (full width) mm: 8 Pre-bending capacity (full width) mm: 6 Min. diameter for pipes mm: 295 At material yield strength N/mm²: 260 Rolling capacity (full width) mm: 8 Pre-bending capacity (full width) mm: 6 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 360 Rolling capacity (full width) mm: 6.5 Pre-bending capacity (full width) mm: 5 Min. diameter for pipes mm: 295 At material yield strength N/mm²: 360 Rolling capacity (half width) mm: 15 Pre-bending capacity (half width) mm: 10 Min. diameter for pipes mm: 1,125 At material yield strength N/mm²: 260 Equipment - Double linear guide system for roll movement Bsdpezguumsfx Aiqsdh - Extra-wide bearing blocks - MCS dual-bearing system for roll rotation - Extra heavy, double-supported swing-out end bearing - Electronic parallelism system EPS - Hardened rolls for high wear resistance and minimal sheet marking - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop function, CE certified - Water cooler for the hydraulic unit All information subject to change. A powered demonstration is available anytime in our showroom.

Leto izdelave: 2018, stanje: dober (rabljeno), Manufacturer: FACCIN Model: 4HEL 3590 Control: Siemens TOUCH Year of manufacture: 2018 Specifications Metric US Standard Roll width 3500 mm Sheet thickness at 3 x top roll Ø 80 mm Sheet thickness at 5 x top roll Ø 110 mm Sheet thickness during prebending 90 mm Top roll Ø 900 mm Top roll Ø 900 mm Bottom roll Ø 800 mm Side roll Ø 600 mm Number of rolls 4 Bending speed 0-6 Adjustment, bottom roll 0-200 mm/min Adjustment, side roll 0-400 mm/min Top support Yes Side support Yes Number of driven rolls 2 Power 90+75+9 kW Dimensions (estimated) Length 4430 mm Width Bsdpokvm Nfjfx Aiqedh 8800 mm Height 11000 mm Weight 178000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roll diameter: 320 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Hardened rolls Conical bending device via inclined positioning of both side rolls Mobile control panel with digital display Motor power: 11 kW CE marking Dimensions (L x W x H): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 t Bedpfxov Htnie Aiqsdh The seller is not liable for typing or data transmission errors. The machine's visual appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, proizvajalec krmilnikov: Siemens, premer spodnjega valja: 160 mm, premer zgornjega valja: 175 mm, premer stranskega valja: 135 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina pločevine: 7 mm, moč: 4,4 kW (5,98 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, trajanje garancije: 12 meseci, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, zavrtljivi zgornji valj, Electronically Controlled, Electrohydraulic Four-Roll Plate Bending Machine Manufacturer: FACCIN, Model: 4 EDL 1617 Technical Specifications: Number of rolls: Four Side roll geometry: Linear guides Working width: 1500 mm Top roll diameter: 175 mm Bottom roll diameter: 160 mm Side roll diameter: 135 mm Press force against top roll: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: With material yield strength 260 N/mm² Rolling capacity (full width): 7 mm Prebending capacity (full width): 6 mm From pipe diameter: 875 mm Rolling capacity (full width): 5 mm Prebending capacity (full width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roll movement Extra wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double-supported swing arm bearing Electronic Parallelism System EPS Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens PLC control Electric drive for top roll to increase efficiency Safety emergency stop rope and CE certification Centralized lubrication Cone bending device Bedpfx Aijwwt Ddjqodh Optional equipment included: CNC control PGS-ABSOLUTE

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Bodpfeypbp Rsx Aiqjdh Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Leto izdelave: 1986, stanje: pripravljen za uporabo (rabljen), Working width: 1250 mm, max. sheet thickness: 3 mm, equipped with loading table, vacuum lifter, feed table with rollers, ejector, output table, control console and manual. Inspection is possible. Available from March 2024. Bdodpfxoq A Un Sj Aiqjh

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, premer spodnjega valja: 310 mm, premer zgornjega valja: 320 mm, premer valja: 310 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina jeklene pločevine: 38 mm, skupna masa: 12.500 kg, skupna dolžina: 4.500 mm, skupna širina: 2.300 mm, skupna višina: 1.740 mm, moč: 18,39 kW (25,00 KM), delovna dolžina: 1.500 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, FACCIN HAV 15342 Variable 3-Roller Plate Bending Machine Electronically controlled, hydraulic 3-roller plate bending machine Technical Data: Number of rollers: three Side roller geometry: variable Working width: 1,550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressing force against top roller: 160 tons Working pressure at rated capacity: 250 bar Guaranteed installed power: 18 kW (25 HP) Guaranteed max. rotation speed: 3.5–7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed Performance: for material with yield strength 260 N/mm² Rolling capacity (full working width): 38 mm Pre-bending capacity (full working width): 20 mm from pipe diameter: 1,600 mm Rolling capacity (full working width): 30 mm Pre-bending capacity (full working width): 17 mm from pipe diameter: 415 mm Standard Equipment: Variable geometry with linear guides for roller movement Bdedpfx Ast Akt Rjiqjh Extra-long swing arm bearing for increased frame stability Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulics and electrics package Simultaneous rotation and roller movement Safety emergency cable with emergency stop and CE certification Centralized lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP 3163 Four-Roll Plate Bending Machine Electronically controlled, hydraulic four-roll plate bending machine Technical Data: Number of rolls: Four Side roll geometry: Swinging lever guide Working width: 3,000 mm Top roll diameter: 630 mm Bottom roll diameter: 570 mm Side roll diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800 mm Width: 3,600 mm Height: 3,550 mm Guaranteed Performance: for material yield strength of 260 N/mm² Rolling capacity (full working width): 70 mm Pre-bending capacity (full working width): 60 mm from tube diameter: 3,150 mm Bdjdpfxeiivfqj Aiqsh Rolling capacity (full working width): 55 mm Pre-bending capacity (full working width): 50 mm from tube diameter: 820 mm Standard Equipment: Swinging lever adjustment of the side rolls Extra heavy-duty, double-supported drop end bearing Electronic parallelism system (EPS) Hardened rolls for high wear resistance Cone bending device Mobile control panel 3 digital position indicators for the side rolls and bottom roll Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP 3135 Four-Roll Plate Bending Machine Electronically controlled, hydraulic four-roll plate bending machine Technical Specifications: Number of rolls: Four Side rolls geometry: Lever arm guidance Bdjdpjiivc Djfx Aiqsh Working width: 3,000 mm Top roll diameter: 350 mm Bottom roll diameter: 330 mm Side roll diameter: 250 mm Installed power (guaranteed): 14.4 kW Maximum rotation speed (guaranteed): 5 m/min Machine weight (guaranteed): 13,000 kg Length: 5,700 mm Width: 1,800 mm Height: 2,100 mm Guaranteed Performance Data: For material with yield strength 260 N/mm² Rolling capacity (full working width): 20 mm Pre-bending capacity (full working width): 15 mm Minimum rollable diameter: from 1,750 mm Rolling capacity (full working width): 14 mm Pre-bending capacity (full working width): 12 mm Minimum rollable diameter: from 455 mm Standard Equipment: Lever arm movement of side rolls Extra heavy, double-supported drop end bearing Electronic Parallelism System (EPS) Hardened rolls for high wear resistance Cone bending device Mobile control panel 3 digital position indicators for side rolls and bottom roll Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP S54 Four-Roller Plate Bending Machine Electronically controlled, electric drive, four-roller plate bending machine Technical Specifications: Number of rollers: Four Side roller geometry: Lever-arm guided Working width: 3,000 mm Top roller diameter: 300 mm Bottom roller diameter: 280 mm Side roller diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500 mm Width: 1,400 mm Height: 1,600 mm Guaranteed Performance: For material with yield strength of 260 N/mm² Rolling capacity (full working width): 18 mm Pre-bending capacity (full working width): 12 mm From pipe diameter: 1,500 mm Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 10 mm From pipe diameter: 450 mm Standard Equipment: Electric drive for the top roller Lever-arm adjustment of the side rollers Extra heavy-duty, double-pinned drop-end bearing Electronic Parallelism System (EPS) Hardened rollers for high wear resistance Cone bending device Bedpfx Aieiivgrsqodh Mobile control panel 3 digital readouts for side and lower roller positions Safety cable with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN HAV 3162 Variable 3-Roll Plate Bending Machine Electronically controlled, hydraulic 3-roll plate bending machine Technical Data: Number of rolls: Three Side roll geometry: Variable Working width: 3,050 mm Top roll diameter: 620 mm Side roll diameter: 550 mm Pressing force against top roll: 630 tonnes Working pressure at rated force: 250 bar Guaranteed installed power: 55 kW (75 HP) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600 mm Width: 3,700 mm Height: 3,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full width): 75 mm Pre-bending capacity (full width): 48 mm From pipe diameter: 3,100 mm Rolling capacity (full width): 55 mm Pre-bending capacity (full width): 40 mm From pipe diameter: 805 mm Bsdpoiivgyofx Aiqsdh Standard Equipment: Variable geometry with linear guides for roll movement Extra-long drop-end bearing for increased frame stability Electronic Parallelism System (EPS) Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hi-tech hydraulic and electrical package Simultaneous rotation and roll movement Safety pull cord with emergency stop and CE certification Centralised lubrication Water cooling for hydraulic system Cone bending device Prepared for retrofit of supports and roller tables FACCIN Advantage Package AP

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, 4 HEL 3128 Four-roll Plate Rolling Machine Electronically controlled, hydraulic four-roll plate rolling machine Manufacturer: FACCIN, Model 4 HEL 3128 Technical data: Number of rolls: Four Side rolls geometry: Linear guides Working width: 3050 mm Top roll diameter: 285 mm Bottom roll diameter: 275 mm Side roll diameter: 205 mm Certified roll hardness: 950-1050 N/mm² Pressing force against top roll: 150 tons Working pressure at maximum force: 190 bar Guaranteed installed power: 11 kW (15 HP) Guaranteed maximum rolling speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450 mm Width: 1,520 mm Height: 1,450 mm Guaranteed capacities: With material yield strength 260 N/mm² Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm from pipe diameter 1,425 mm Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for roll movement Extremely wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double end-stopped swing bearing Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Bedpfx Aioiink Seqjdh Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulic and electrical package Safety tripwire with emergency stop and CE certification Central lubrication Cone bending device FACCIN AP package CNC control PGS-ULTRA

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, RCMI 280 Three-Roll Profile Bending Machine Technical Specifications: Bjdpeiivhdefx Aiqedh Section Modulus: 720 cm³ Main Shaft Diameter: 280 mm Lateral Shaft Diameter: 280 mm Outer Diameter of Bending Rolls: 720 mm Adjustable Rolling Speed: 0–4 m/min Installed Power: 44 kW (60 HP) Weight: 34,000 kg Standard Equipment: Hydraulic adjustment of lateral rolls 3 driven rolls (3 hydraulic motors + 3 planetary reduction gears) Independent, fully hydraulic lateral profile guide rolls, adjustable in 6 directions Automatic circumference and rotation speed compensation Complete universal roller set for standard profiles and beams (12 pieces) Tool set for machine equipment Low-voltage control via mobile operator console Safety device in accordance with regulations Technical documentation and CE certificates Digital displays for the roll positions of the side rolls

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 10 h, Including: Special iron bending tool ATRC 18 Special ornamental bending tool ATAR 305 Helical bending device ATSC Demonstration machine, less than 10 hours of operation! TECHNICAL DATA Shaft diameter: 30 mm Roller diameter: 128 mm Roller speed (rpm): 8.5 - 17 Bdjdpfet Akxaox Aiqeh Drive motor: 0.75 kW Main switch with trip coil and built-in emergency stop (CP30 - CP30 R) - Reversing gearbox and dual-speed selector mounted on a separate control panel (CP30 - CP30 R) - Foot pedal for rotation control (L/R) with built-in emergency stop (CP30 PR) - Two-speed selector (CP30 PR) - Mechanical adjustment of the upper roller with digital position display - Two traction rollers with knurled surface - Machine inner frame made of steel - Shafts made of hardened and ground, high-strength steel - Gear wheels made of special steel with ground teeth - Rollers made of special steel, hardness 59/60 HRC - Outer cover in ABS - Working position: horizontal (CP30) - Working positions: horizontal and vertical (CP30 R - CP30 PR) Weight: CP 30 PR: 240 kg External dimensions (mm): CP30 PR Base: 680 x 800 – Height: 825 ACCESSORIES Guide rollers, 2-way Universal rollers (standard) Operating key Operating manual

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN HAV 3293 Plate Width: 3200 mm Bedoiivg Sspfx Aiqedh Top Roll Diameter: 930 mm Side Roll Diameter: 800 mm Machine Weight: 150 tons Rolling Capacity (Y:260 MPa/Ø 4650 mm): 3200 mm x 155 mm Pre-bending Capacity (Y:260 MPa/Ø 4650 mm): 3200 mm x 115 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, BIKO B4 2014 Linear Four-Roller Plate Rolling Machine Hydraulically controlled four-roller plate rolling machine Manufacturer: BIKO, Model: B4 2014 Technical Data: Number of rollers: Four Bedpsiinknofx Aiqedh Geometry of side rollers: Linear guides Working width: 2000 mm Top roller diameter: 145 mm Lower roller diameter: 130 mm Side roller diameter: 130 mm Guaranteed installed power: 5.5 kW Guaranteed maximum rotational speed: 5 m/min Guaranteed machine weight: 2,300 kg Length: 2,900 mm Width: 900 mm Height: 1,000 mm Guaranteed Performance: For material with yield strength of 260 N/mm² Rolling capacity (full working width): 4 mm Pre-bending capacity (full working width): 3 mm From pipe diameter: 725 mm Rolling capacity (full working width): 3 mm Pre-bending capacity (full working width): 2 mm From pipe diameter: 190 mm Standard Equipment: Linear guide system for roller movement Extra-wide bearing blocks Needle bearings for roller rotation Extra heavy-duty, double-mounted swing bearing Hardened rollers for high wear resistance Hydraulic parallelism system for side rollers Digital display for side and lower roller positions Cone bending device Control via swiveling operator panel Safety pull cord with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Max. rolling capacity (cold forming): mm 32 Max. bending capacity (cold forming): mm 24 For pipe diameter: mm 2050 For material with yield strength: N/mm² 260 Usable length: mm 3050 Number of rollers: four Bdodjf T Rzfopfx Aiqeh Top roller diameter: mm 410 Bottom roller diameter: mm 390 Driven rollers: two Rotation speed: 5 m/min Rolling speed: hydraulic Installed power: 30 HP Voltage: 400V, 50Hz, 3Ph Includes: - Hardened & polished rollers - Cone bending device - Electronic roller parallelism - Siemens PLC control - CE marking with corresponding drive brake - Mobile control panel

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, TECHNICAL DATA: Number of rollers FOUR Geometry Linear guides Maximum sheet width mm 3000 Top roller diameter mm 390 Bottom roller diameter mm 370 Side roller diameter mm 295 Installed power HP 40 Infinitely variable rotational speed m/min 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield strength 260 N/mm² Bdedpfogd T R Dex Aiqsh Rolling capacity (full working width) Ø 1950 mm 25 mm Pre-bending capacity (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Pre-bending capacity (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting adjustment

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Electronically controlled, hydraulic four-roll plate bending machine Manufacturer: FACCIN, Model 4 HEL/S 2122 Technical specifications: Number of rolls: Four Bodpfod Eqg Hex Aiqjdh Side roll geometry: Linear guides Working width: 2000 mm Top roll diameter: 225 mm Bottom roll diameter: 215 mm Side roll diameter: 165 mm Pressing force against top roll: 100 tons Guaranteed installed power: 9.2 kW (12.5 HP) Guaranteed max. rotation speed: 4–8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500 mm Width: 1,200 mm Height: 1,100 mm Guaranteed performance: With material yield strength of 260 N/mm² Rolling capacity (full working width): 11 mm Pre-bending capacity (full working width): 8 mm From pipe diameter: 1,100 mm Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 286 mm Standard equipment: Double linear guide system for roll movement Extra-wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty swing arm bearing, double mounted Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulic and electrical package Safety tripwire with emergency stop and CE certification Centralized lubrication Cone bending device Optional equipment included: CNC control PGS-ABSOLUTE