Esterer = Ewd Deli Vrat So Na Voljo Posamezno nakup rabljenega (39.515)

Stanje: dober (rabljeno), Saw frames, guide rails, connecting rods, feed rollers, new roller shafts, rack bars, new rack bar heads, roller lifting hydraulics, frame stands with extension plates, frame flywheel assembly, fixed pulley and idler pulley with bushing, and many more parts Nsdpfx Ahowhv Rno Uswg

Stanje: generalkompletno obnovljen (rabljeno), 1 komplet = 8 kosov vodil, primernih za okvirno žago ESTERER S 71, generalno obnovljeno, vse drsne površine so ponovno natančno rezkane pod pravim kotom. Nwjdpfsywh Hmex Ah Usg

Stanje: kot nova (razstavni stroj), 7 vodil, primernih za žago Vollgatter ESTERER HD 30 ali EHD 30, popolnoma kot nove, neuporabljene. 5 od 7 vodil so votla vodila za pretok hladilne vode. Nwjdoigqqhepfx Ah Ujg

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Very sturdy roller conveyor with hydraulic lift and lower cross conveyor. Section 1: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Construction height 1,000 mm. Integrated hydraulic lift and lower cross conveyor with 4 chain strands. Spacings: 1,500 - 1,300 - 1,000 mm. Completely sheet metal covered. Hydraulic supporting idler rollers. Driven by a geared motor. New bearings. Section 2: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Nedpfxot Hg Hus Ah Uewg Built-in hydraulic lift and lower cross conveyor with 6 chain strands. Cantilevered design allows workpieces to be transferred under the roller conveyor to the left or right. Completely sheet metal covered. Including hydraulic power unit for both roller conveyors.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Complete hydraulic feed unit for EWD Esterer saw frame type HDE. Very well maintained. Infinitely variable feed rate from 0 to 12 m/min. Njderrxtpjpfx Ah Uowg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Kompleten okvir žage za Esterer Gatter HDE ali SS 71. Nwjdpfxexw Ubno Ah Ueg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Base plate for Esterer frame saw type SS 71 or HD 71 with main shaft and bearing unit. Equipped with solid drive and idler pulleys. Nsdpfx Ajth Udmjh Uewg

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), 1 piece of mass balancer for saw frame. Complete with all accessories and mounting parts. Nwsdpjfm Ev Refx Ah Ueg Has seen little use.

Stanje: zelo dobro (rabljeno), 2 pieces of stilts for Esterer sawmill Type EHD 30. Only 6 years in use. Stilts and spare parts for other Esterer sawmill types are also available. Nedpfxsip Uf Uo Ah Uswg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 2 kosa vratnih stebrov, močna izvedba, za Esterer Gatter HDE ali SS 71, s pokrovom. Nedpfxexw Uf To Ah Uswg

Stanje: zelo dobro (rabljeno), Spare parts for Gatter LSH 65, partly as new, new and used. Nwedpei T Egpefx Ah Ueg Flywheels, support columns, hydraulic cylinders, chain drives, feed gearboxes, guides, solenoid valves, cantilever parts. Upper and lower saw frames, saw blade clamps with insertion brackets. Pulleys. Spare parts also available for Esterer Gatter SS 71.

Stanje: generalkompletno obnovljen (rabljeno), 1 komplet = 8 kosov vodil, primernih za ramno žago ESTERER SS 56 ali SS 71, generalno obnovljenih, torej so vse drsne površine na novo frezane pod točnim kotom. 1 komplet zgornjih vodilnih čevljev, izvrtina 110 mm Ø, višina 250 mm. 1 komplet spodnjih vodilnih čevljev za ležaj 6210 za SS 56. Nsdpfsw Eu Aksx Ah Uewg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with Veneer Sanding Attachment The sanding unit is tiltable up to 45° via a lever. The machine frame, constructed from welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with a separate gear motor for improved sanding results. Oscillation can be optionally switched on or off. Sanding shoe equipped with graphite lining for increased belt life. Height-adjustable sanding table to utilize the full width of the sanding belt. Height-adjustable auxiliary table with extraction for sanding radii. Nwjdpjy Iu N Ajfx Ah Ujg Spring-loaded belt tensioning automatically compensates for differences in belt length. Equipped with dual extraction ports. Extendable roller table extension. Rubber-coated sanding drum. Veneer edge sanding attachment with contact shoe featuring fine adjustment, pressure relief rollers, and stop rulers. Infeed ruler with grooves for veneer overhangs. Quick changeover from veneer edge to solid wood sanding. Dimensions and Weights Length: approx. 1900 mm Width/Depth: approx. 900 mm Height: approx. 1350 mm Weight: approx. 290 kg Dust Extraction Connection Extraction port diameter: 140 / 100 mm Drive Power Oscillation motor: 0.25 kW Work Table(s) Work table length: 960 mm Work table width: 350 mm Work table height adjustment: 230 mm Min. height: 735 mm Max. height: 965 mm Longitudinal table height adjustment: 230 mm Cross table length: 330 mm Cross table width: 330 mm Cross table min. height: 720 mm Cross table max. height: 900 mm Cross table height adjustment: 180 mm Electrical Data Main drive motor: 3.0 kW Connection voltage: 400 V Sanding Unit Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt speed: 20 m/s Sanding surface length: 1050 mm Sanding surface width: 200 mm Oscillation stroke: 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, moč: 26 kW (35,35 KM), notranja dolžina: 2.000 mm, notranja širina: 1.000 mm, notranja višina: 1.600 mm, skupna dolžina: 2.180 mm, skupna širina: 1.702 mm, skupna višina: 2.593 mm, vrsta aktuacije: električni, vrsta goriva: električni, ogrevalna zmogljivost: 24 kW (32,63 KM), Oprema: CE označba, dokumentacija / priročnik, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Immediately available ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for an individual transport quote. ✅ Immediately available – 1 unit in stock ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty Available from stock – no production lead time ⭐ Matech Powder Oven with Electric Heating – MATOVENB-101620 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Immediately available ☘️ Efficient ☘️ Professional curing ✅ Electrically heated powder oven ✅ Stock equipment – available for immediate delivery ✅ No production lead time ✅ Compact design for small and medium-sized workpieces ✅ 2 m internal length for longer workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Adjustable automatic exhaust fan function ✅ Audible signal at end of curing process ✅ Insulated door with special locking system ✅ Robust sandwich panel construction ✅ Excellent heat retention thanks to strong insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shut-off after process completion ➖➖➖➖➖ Technical Specifications: ✔️ Model: MATOVENB-101620 ✔️ Internal and external dimensions: see technical drawing in image gallery ✔️ Electric heating power: 24 kW ✔️ Fan capacity: 3,000 m³/h ✔️ Circulation fan: 1.50 kW ✔️ Exhaust fan: 0.53 kW ✔️ Total power: approx. 26 kW ±10% ✔️ Digital temperature control ✔️ Infinitely adjustable temperature up to 220°C ✔️ Interior: 1.2 mm galvanized steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm rock wool + 100 mm glass fiber ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Audible signal after process completion ✔️ Control panel: 1 unit ➖➖➖➖➖ ⚙️ Optional Upgrades ✅ PID control for precise temperature regulation ✅ Touchscreen control panel and smartphone operation ✅ Ramp heating mode for defined temperature profiles ✅ Insertable shelf system or workpiece trolley ✅ Special dimensions and custom versions upon request Rails and support beams are not included in the price. ➖➖➖➖➖ Secure your stock unit now! This unit is currently available 1 x in stock. Ideal for businesses needing a professional powder coating solution at short notice. ➖➖➖➖➖ Njdpfx Aey N En Eeh Ujwg ✳️ Maintain your liquidity! We offer various financing options. Contact us for leasing, hire-purchase, or installment payment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from superior service and quality! ✨ Enquire now – get your business ready for professional powder coating!

Leto izdelave: 2026, stanje: novo, Butterfly Table 12m long – available immediately from stock! Ready for immediate delivery! BOOSTON – We are a manufacturer of machinery and equipment for the production of prefabricated timber frame houses. Buy directly from the manufacturer! Quality guarantee, short delivery times. We offer an assembly table – hydraulic (butterfly table) consisting of two sections with a length of 12.0 m (available models from 6 m to 12 m). - Table drive – hydraulic cylinders, hydraulic pump - First section with a total width of 360 cm - Second section with a width of 230 cm Nsdpfxjmrtx Uo Ah Uowg - Permissible load on the table: 95 kg/m² (for a 12 m table – total 3,500 kg) - Robust, powder-coated steel construction - Provisions for mounting SD-01 clamping cylinders

Stanje: rabljeno, Stainless Steel Heat Exchanger AGETHERMA Type FT-1.1-910/230/10-RS04-T10-ATWH Air-Water, Air-Oil Heat Exchanger Serial No. WT08-1065P-2 Year of manufacture: 2008 Completely made of stainless steel (likely grade 1.4571) Gas-Air flow area: 900 x 230 mm Connection flange outside: 1000 x 310 mm Max. allowable pressure: 10 bar Max. allowable temperature: 300 °C Volume: 27 liters Nwodpfx Ahoy Dvgus Uog Test pressure: 17.9 bar Net weight: 325 kg Manufacturer test date Flange size: Ø DN25 DIN 2635 PN 40 (2 pcs) - Tubes made of stainless steel with aluminum fins for improved heat transfer Available as accessories – for an additional charge: 3 units of heat exchangers with identical specifications and 27-liter capacity (each weighing 325 kg) 1 unit of heat exchanger with identical specifications and 17-liter capacity (weight: 200 kg) 2x 90° elbows with flange connection, stainless steel 2x adapters from rectangular flange to round tube Ø 210 mm, stainless steel Price is per heat exchanger. All four heat exchangers are shown together as a unit on pallet in the pictures. Total weight of all parts approx. 1,400 kg Package sale of all heat exchangers: EUR 4,000

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, CNC Machining Centers Rover Multi Up M C S Working Area *: X = 3280 mm; Y = from 1580 to 1660 mm, depending on working conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece Passage *: Y = 1900 mm Axis Travel Ranges *: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. AUXILIARY VACUUM SYSTEM – 2 areas Enables clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool magazine and the 12-position side tool magazine. Tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for the machine PC. 6 ATS Workpiece Supports – 18 Module Carriers — 6 aluminum workpiece supports. Guidance of the workpiece supports via linear guides with recirculating ball carriages. Clamping on the front and rear linear guides using pneumatic cylinders. Clamping is released by a push button mounted on the front of the workpiece support. Nwedpfx Ahoy Ehrxs Ujg — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping. Vacuum modules can be rotated in 15° increments on the module carriers – an ideal solution for shaped parts. — 18 locks for module carriers without template. SA (Set-Up Assistant) Worktable for worktables up to 1550 mm. Supported manual positioning system with travel direction indicator and position indicator. — Sensors on each worktable and along the X axis of the working area. — Display of travel direction and achieved position for the carriage during the positioning phase, mounted on each worktable. The system, according to the worktable programming, suggests to the operator the movement direction of each worktable and carriage, and signals the achieved position with a green LED and beep, with a tolerance of +/- 1.5 mm. Division of the pneumatic system into 2 working areas in X Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Suction hood with 12 NC-controlled positions for electrospindle with 5 axes. Flange for preparation of a 5-axis machining unit for aggregate mounting. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions in machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. Tool holder HSK F63, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm for tool holder. Hi-Tech Tool Set Complete set of tools for testing acceptance Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital devices for measuring tool length for up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter vacuum cup proposal 5-axis simultaneous Material removal simulation 12 months warranty period Location: ex stock 54634 Bitburg – immediately available –

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 “Z” Version for RTC 135 5257452 Vacuum table with electric fan 3kW 5257453 Oscillating belt air blow-off device for 5257454 Oscillating belt air blow-off device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure rollers, 2nd position 5257500 Grooved rubber pressure rollers, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Inspection door with window 5257606 LED lamp for internal lighting TECHNICAL DATA Dimensions and Weights Length (approx.) 1800 mm Width/Depth (approx.) 2000 mm Height (approx.) 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Line frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (main motor): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Maximum sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Nwsdpey Ehiwofx Ah Usg Workpiece Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Product Information EU 2023/2854 Type of data generated: Usage data Format of generated data: Common, machine-readable formats such as JSON Data volume: Up to 5 MB Continuous real-time data generation: Yes Data storage location: On the device and on a remote server Data access: On device and via physical as well as wireless interfaces Location: ex stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2026, Table Router SCM / CASADEI F 25 M LL FK Robust woodworking machine with spindle moulder tilting ±45° on both sides and MK4 interchangeable spindle Item number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel and cast iron construction - Dynamically balanced spindle unit anchored to the worktable - Exceptionally robust design - Smooth running thanks to precision units and high machine weight - Standard with forward/reverse rotation and electronic interlock for direction change - Five speeds from 3,000 – 10,000 rpm - Speed change conveniently accessed from the machine side - MK 4 interchangeable spindle system as standard - Large cast iron worktable for lasting precision - Simple operation via controls and digital speed display on machine front - Large professional fence with fine adjustment and aluminium fence jaws, as standard - Fence adjustment via handwheel - Numeric display of spindle height setting, accurate to one-tenth of a millimetre - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Weight (net): approx. 510 kg Dust Extraction Connection Number of extraction ports: 2 Extraction port diameter: 80 mm Number of fence extraction ports: 1 Fence extraction port diameter: 120 mm Worktable Worktable length: 2,500 mm Worktable width: 810 mm Table height: 923 mm Set-up Information Space requirements note: Dimensions account for maximum travel or usable lengths Work area length: 3,700 mm Work area width/depth: 5,000 mm Work area explanation: Please add stated figures to space requirements to calculate recommended free installation area for the machine Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Drive motor power: 7.0 kW Spindle Moulder Spindle tilt: -45° to +45° Spindle usable length: 140 / 180 mm Usable spindle length note: For spindle diameter Ø 30 – 35 mm / for spindle diameter Ø 40 – 50 mm Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Maximum cutter diameters Max. lowerable cutter diameter: 320 x 60 mm Max. profiling cutter diameter: 250 mm Max. tenoning cutter diameter: 350 mm Max. moulding cutter diameter: 160 mm EQUIPMENT Equipment Spindle fence: Heavy-duty professional design with aluminium fence jaws and fine adjustment, frontside handwheel adjustment with digital numeric display Curved-cutting safety hood: ✔ Spindle height adjustment: motorized, with digital display Spindle tilt adjustment: motorized, with digital display Control: motorized adjustment for spindle height and tilt with digital display Control elements location: on machine body Table design: table extensions left and right and extendable workpiece support (total width 2,500 mm) Location: ex-stock 54634 Bitburg Nsdsy Ehcdopfx Ah Uowg - immediately available -

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 7.086 km, moč: 132 kW (179,47 KM), prva registracija: 11/2024, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 4.330 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 65 l, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, število prestav: 6, emisijski razred: Euro 6, skupna dolžina: 6.250 mm, skupna širina: 2.150 mm, skupna višina: 2.800 mm, dovoljena osna obremenitev (os 1): 1.850 kg, dovoljena osna obremenitev (os 2): 2.100 kg, Leto izdelave: 2024, Splošne informacije Število vrat: 2 Kabina: enojna Registrska številka: V-02-JJG Tehnične informacije Število valjev: 4 Prostornina motorja: 2.299 cc Menjalnik: Avtomat, 6 prestav, avtomatski Nwjdpfjyba Trox Ah Ujg Največja dovoljena obremenitev sprednje osi: 1.850 kg Največja dovoljena obremenitev zadnje osi: 2.100 kg Teže Lastna teža: 2.715 kg Nosilnost: 785 kg GVW: 3.500 kg Vzdrževanje Tehnični pregled (APK): veljaven do 11.2027 Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Poškodbe: nobene Finančne informacije Cena: na zahtevo DDV/obdavčitev razlike: DDV odbitna Dodatne informacije Za več informacij kontaktirajte Jelmer Broekhuizen, Mike Kornet ali John De Frankrijker.

Leto izdelave: 2026, stanje: novo, Vakuumska membranska stiskalnica VPR-4000 je univerzalni stroj za obdelavo lesa in termoformiranje. Stiskalnica VPR-4000 je poleg tega tudi vrtljiva in premična. Možnosti uporabe: Furniranje / oblikovno lepljenje / oblačenje ... Oblaganje različnih profilov (furnir, papir, plastika ...) Upogibanje lesa: Izdelava ukrivljenih in slojasto lepljenih delov Vakuumski sistem: Delovna površina z vakuumskimi kanali za enakomeren podtlak tudi pri velikih obdelovancih. Becker vakuumska črpalka / brez olja / kapaciteta rezervoarja 100 l Delovna površina: 4000 x 1500 mm Nedpfx Ahoyr R Hwj Uewg Moč črpalke: 0,75 kW Zmogljivost vakuumske črpalke: 40 m3/h Gumijasta membrana Zunanje dimenzije: 4100 x 1650 x 1000 mm Teža: 400 kg Lokacija: Iz zaloge, 54634 Bitburg - prosto naloženo -

Stanje: zelo dobro (rabljeno), We offer a selection of high-quality refrigeration compressors from Bitzer and Dorin, available immediately. Ideal for industrial applications, refrigeration, and air conditioning systems. Item No.: Kühl 016 Manufacturer: Bitzer Model: 4JTC-15K-40P With EMERSON OM4-120 oil level monitoring Semi-hermetic Refrigerant: R-744, CO₂ for transcritical applications Displacement: 9.2 m³/h Maximum operating pressure (LP/HP): 75/130 bar Nwsdpfx Ahsyx U Hve Uog Quantity in stock: 2 units Item No.: Kühl 018 Manufacturer: Bitzer Model: 4HTE-20K-40P With EMERSON OM4-120 oil level monitoring Semi-hermetic Refrigerant: R-744, CO₂ for transcritical applications Displacement: 12 m³/h Maximum operating pressure (LP/HP): 100/160 bar Quantity in stock: 1 unit Item No.: Kühl 024 Manufacturer: Dorin Model: CDS151B With EMERSON OM4-120 oil level monitoring Semi-hermetic Refrigerant: R-744, CO₂ Displacement: 2.53 m³/h Maximum operating pressure (LP/HP): 31/95 bar Quantity in stock: 1 unit Item No.: Kühl 025 Manufacturer: Dorin Model: CDS301B With EMERSON OM4-120 oil level monitoring Semi-hermetic Refrigerant: R-744, CO₂ Displacement: 4.34 m³/h Maximum operating pressure (LP/HP): 31/95 bar Quantity in stock: 1 unit Immediately available – no waiting times Premium brand compressors Prices on request! Shipping available

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 10 km, moč: 103 kW (140,04 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, barva: bela, število sedežev: 3, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, nadzor oprijema, parkirni senzorji, računalnik na krovu, registracija tovornjaka, servovolan, sistem za imobilizacijo, spojka prikolice, tempomat, Nemško novo vozilo - od pogodbenega partnerja Peugeot! Boxer L2H2 Furgon Klimatska naprava Bluetooth Zadnji parkirni senzorji (pisk) Vzvratna kamera 3-sedežni Vlečna kljuka in še več. Nedpfoyly Abex Ah Uewg Za vprašanja nas kontaktirajte. Na voljo imamo približno 100 gospodarskih vozil takoj na zalogi! Ponujamo tudi leasing ali financiranje. Cena velja samo za podjetja!

Stanje: dober (rabljeno), Set di vari equipaggiamenti disponibili per visione presso l'indirizzo indicato, previo contatto telefonico. Nwjdpfx Ajtv Da Neh Usg

Stanje: novo, Leto izdelave: 2025, PROMOTION OTINUS: 0% LEASING! Don’t wait for a better moment – it’s now. Otinus machines with financing at no additional cost. Pure offer: you only pay the net price of the machine. Optimize taxes in 2026 and choose proven equipment. Contact us for details! CNC Lathe HLC-4055 with Fanuc 0i TF Control Machining Specifications: - Max turning diameter over bed: Φ 560 mm - Max turning diameter over carriage: Φ 320 mm - Max turning diameter: Φ 400 mm - Max turning length: 548 mm - Spindle center height from floor: 980 mm - X-axis travel: 210 mm - Z-axis travel: 610 mm Tool Turret: - Turret type: Hydraulic V12 - External tool size: 25x25 mm - Internal tool diameter: Φ 40 mm - Indexing time: Φ 0.55 s Nedpfewdt Szjx Ah Uswg Spindle: - Drive type: Belt drive - Max spindle speed: 4500 rpm - Power consumption – 15 min: 11/15 kW - Torque – 15 min: 140/250 Nm - Spindle mount: JISA2-6 - Spindle bore: Φ 76 mm - Max workpiece diameter: Φ 50 mm - Front spindle bearing diameter: Φ 100 mm - Spindle diameter: 208 mm Feed Rates: - Rapid traverse X: 24 m/min - Rapid traverse Z: 30 m/min - X/Z servo motor power: 1.8/1.8 kW Tailstock: - Tailstock quill diameter: Φ 100 mm - Center type: MT No.4 - Quill stroke: 120 mm - Travel range: 410 mm Other Specifications: - CNC control: FANUC - Power supply: 25 kVA - Coolant tank capacity: 200 l - Machine weight: 4.5 t - Dimensions [L × W × H]: 4200×2050×1850 mm