Es-Ge 3-Achs-Sattelanhänger, Bordwände nakup rabljenega (85.022)

Stanje: novo, največja dovoljena obremenitev: 32.155 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, with immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details on request. Chassis: * Welded construction made from high-quality steel profiles with punched cross-members. Designed for high point loads. Bedpfey Auhzsx Agtolg Coupling Device: * Fifth wheel plate with 2-inch kingpin. Underrun Protection: * In accordance with EC regulations, bolted design. Side Protection: * In accordance with EC regulations. Landing Legs: * 2 x 12 t landing legs with compensating foot and single-side operation (right side in driving direction). Axles: * 3 x 9 t air-suspension axle assemblies, SAF make, with disc brakes approx. 430 x 45 mm, centrally aligned wheel connection ET120, ABS, total air suspension lift approx. 180 mm (lift approx. 110 mm, lower approx. 70 mm). * Air suspension control via manual regulator with stop function. Steering: * Last axle steered automatically by rod linkage. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Brake System: * Dual-circuit compressed air brake system in accordance with EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, swap-proof coupling heads fixed to the front cross member, without connecting line to the truck. * Manufacturer: Wabco. Tyres: * 6 x, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in driver’s cab (pre-installed by chassis manufacturer). Mudguards: * In accordance with EC, 1/4 PVC fenders in front of and behind the axle assembly. Load Securing: * 9 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 8.0 t each). * 8 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 2.5 t each). * On the outer frame, holes every approx. 500 mm for lashing straps (lashing straps can be hooked in with side boards closed; chamfered outer frame). Stanchion Pockets: * 10 pairs of stanchion sockets on the outer frame, evenly distributed. * 4 rows of stanchion sockets across the loading area. * Plug-in stanchions: 20 pieces, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm. * Rack inside front wall for 20 plug-in stanchions. Front Wall: * Reinforced steel construction, fixed, lined inside with approx. 9 mm phenolic plywood (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor fitted into the outer frame. Sideboards: * 4 x 250 mm side boards and rear wall made from anodized aluminium hollow profiles, folding down and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under the chassis. * Insertion rails for sideboards and stanchions on left and right. Lighting System: * In accordance with EC, 24 volt with multi-chamber lamps, LED side marker lamps, LED position lights front white, LED contour lights rear, number plate lights. * 1 x 15-pin and 2 x 7-pin socket connectors on front cross member. Equipment: * Wheel chocks with double holder. * Warning signs according to ECE 70. * Work spotlight on lamp bracket (actuated via reverse gear). * Bracket for beacon at rear, including beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paintwork: * Chassis and front wall cleaned by sandblasting, primed and top-coated in single colour. * Chassis: hot-dip galvanized + RAL colour of your choice. * Front wall: RAL colour of your choice. * Sideboards: anod

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Extract from the equipment. Complete equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads * Underrun beam approx. 700 mm wide * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm * Neck height at the front approx. 130 mm Blsdow U H Sbjpfx Agtog Coupling Equipment * 2-inch king pin Underrun Protection * Bolted version according to EC regulations Side Impact Protection * According to EC regulations, made from anodised aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR) Axles * 3 x 9 t air suspension axles with disc brakes, 22.5" * Total lift approx. 180 mm * Lifting and lowering device via rotary valve Brake System * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Mudguards * According to EC regulations Spare Wheel Carrier None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t * In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles Lighting System * According to EC regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED outline lights rear * Licence plate lights * Lane marker lights, LED * 1x15- and 2x7-pin plug sockets at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning signs * Bracket for rotating beacon, incl. rotating beacon * 2 rear rubber buffer stops * Access ladder rear right, foldable and extendable (without platform) * 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: single-colour RAL as per request * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single-colour RAL as per request * Centre stanchions: single-colour RAL as per request * Side underrun protection: aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver Contour Marking * Complete, yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm * Internal magazine for 20 plug-in stanchions on the front wall * 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion

Stanje: rabljeno, največja dovoljena obremenitev: 32.610 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, naslednji pregled (TÜV): 11/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with those available immediately and at short notice on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with through crossmembers, designed for high point loads Coupling System: * 2-inch kingpin Underrun Protection: * Bolted design, compliant with EC regulations Side Guard: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and single-sided operation, positioned FR right Axles: * 3 x 9 t air suspension axle units * Disc brakes * Make: Gigant Brake System: * Two-line air brake system complying with EC, featuring EBS and RSS, automatic load-dependent braking force distribution * Spring brake cylinders as parking brake * Mix-up-proof coupling heads permanently mounted on the front beam, without connecting line to tractor unit * Make: Wabco Tyres: * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Holder: * 1 double basket with mounting kit for a spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.5 t * Outer frame drilled approx. every 500 mm for lashing straps Front Wall: * Reinforced steel construction, fixed * Interior covered with approx. 9 mm phenolic overlay plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Lighting System: * EC compliant, 24 volt, with multi-chamber tail lights * LED side marker lights * LED front position lights (white) * LED rear outline lights * Number plate lights * 1x 15-pin and 2x 7-pin sockets on front beam Painting: * Chassis and front wall cleaned by sandblasting, primed, and painted in solid color * Chassis: RAL 3002 carmine red * SSV: aluminum anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Rims: silver Incl. special equipment: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * 20 stakes made from galvanized tube 80/50, total length approx. 1,000 mm * Interior of the front wall with magazine for 20 plug-in stakes * Container locks for 1 x 40' and 2 x 20' containers, flush with rear Bjdjwyhy Espfx Agtelg * Container locks for 1 x 20' container centered * Work lamp on lamp bracket (activated via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our complete range of vehicles with immediate and short-term availability can be found on our website. Extract from the specification. Full equipment list available on request. Chassis: * Welded construction using high-quality steel profiles with through cross members, designed for high point loads * Underrun nose width approx. 700 mm * Outer frame as UNP profile * Scuff plate approx. 8mm * Neck height at the front approx. 130 mm Towing Equipment * 2-inch kingpin Underrun Protection * Bolted version, compliant with EC regulations Side Impact Protection * According to EC, made from anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-sided operation on front right Axles * 3 x 9 t air suspension axle units * 22.5" disc brakes * Total stroke approx. 180 mm * Lifting and lowering device operated by rotary slide valve Braking System * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Non-interchangeable coupling heads permanently mounted on the front crossmember, without connecting line to the truck Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET120 * Brand of our choice Bsdpfsugqvfsx Agtjlg * Tyre pressure monitoring (TPMS) via EBS CAN bus system Mudguards * According to EC Spare Wheel Carrier * Not included Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.0 t * Holes for lashing straps in the outer frame at approx. 400-600 mm intervals Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Inner cladding with phenolic resin plywood, approx. 9 mm, height approx. 1,250 mm Floor * Approx. 28 mm hardwood floor set into the outer frame using galvanized omega steel profiles Lighting System * According to EC, 24 volt, with multi-chamber lights * LED side marker lights * LED position lights, white, front * LED outline marker lights, rear * License plate lights * Lane marker lights, LED * 1x15- and 2x7-pin socket connectors on the front crossmember Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Holder for rotating beacon including rotating beacon * 2 rubber buffer stops at rear * Foldable and extendable access ladder at the rear right (without platform) * 1 open mesh box, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, located behind the axles Paintwork * Front wall: single RAL color of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + single RAL color of your choice * Side protection: aluminium anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Wheel rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets transversely to loading area * 20 pieces of stanchions made of galvanized tube 80/50, total length approx. 1,200 mm * Magazine for 20 plug-in stanchions on inside of front wall * Container locks for 1 x 40’ and 2 x 20’ containers, flush with the rear * Container locks for 1 x 20’ container centered * Work light at lamp bracket (activated in reverse gear) * 2 stainless steel toolboxes, approx. 600x500x500 mm, 1 eac

Stanje: novo, največja dovoljena obremenitev: 39.070 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from specifications. Complete specification available upon request. Chassis: * Welded construction made of high-quality steel profiles with punched cross-members. Designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling Device: * 2-inch kingpin (also suitable for 3.5-inch reception) Underride Guard: * In accordance with EC regulations, bolted design Side Impact Protection: * In accordance with EC regulations Landing Legs: * 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S foot Axles: * 3 x 9 t air suspension axle assembly, manufacturer: SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheels, offset 120 mm, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary valve with locking function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on lifting/lowering device bracket * Smartboard/TIM/Infocenter, no TPMS display Lift Axle: * First axle liftable, fully automatic load-dependent lift control, starting aid via button in the cab (15-pin socket PIN12). Button in cab is not included in delivery Brake System: * Two-line compressed air brake system according to EC guidelines with EBS and RSS, automatic load-sensing, spring-loaded cylinders as parking brake, non-reversible coupling heads fixed to front cross-member, without connecting line to motor vehicle, Wabco brand Tyres: * 6-fold, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), offset 120 mm * Basic version tyre pressure monitoring, connected to the EBS CAN bus system * Tyre pressure display in the cab (pre-installed by tractor manufacturer) Mudguards: * In accordance with EC, PVC mudguards (semi-shell) over all axles * Mud flaps with anti-spray Load Securing: * 8 pairs of welded hook plates in the outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings on the sides of the outer frame, evenly distributed (tensile strength approx. 10 t) Stake Sockets/Posts: * 5 pairs of stake sockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake sockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 removable posts made of galvanized square tubing, approx. 80 x 80 x 4 mm, stop at bottom Front Wall: Bodpfxoyz E T Se Agtelg * Bolted front wall, approx. 1,200 mm high, panelled with sheet metal Stake Magazine: * Magazine for removable posts inside front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting System: * EC-compliant, 24 volt with multi-chamber lights, LED side marker lights, LED front position lights white, LED rear outline marker lights, license plate lights * 1x15-pin and 2x7-pin sockets on the front cross-member Equipment: * Warning panel according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for revolving beacon at rear (including beacon) * 1 rear access ladder, foldable and extendable (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of front wall * Smartboard with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the support legs (switched via revers

Stanje: novo, največja dovoljena obremenitev: 39.850 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment features. Full equipment specification available upon request. Chassis: * Welded construction made from high-quality steel profiles with punched crossmembers * Designed for high point loads. Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underrun nose approx. 700 mm wide * Mounting interface for customer-side installation of a support device at the front, approx. 90 x 90 x 4 mm Coupling device: * 2-inch king pin (also suitable for 3.5) Underrun protection: * According to EC regulations, bolted version Side impact protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) with S-foot Axles: * 3 x 9 t air suspension axle units, brand of our choice, with disc brakes approx. 430 x 45 mm * ABS * Wheel connection, center guided, 10-hole with offset 120 * Total lift of air suspension approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, control via rotary slide valve with detent feature, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted at the lifting/lowering unit bracket * Smartboard/TIM/Infocenter, no TPMS display Lift axle: * First axle liftable, with fully automatic, load-dependent lift control, start-up aid via button in driver’s cab (15-pin socket PIN12). Button in driver’s cab not included in delivery Brake system: * Manufacturer of our choice * Two-line compressed air braking system according to EC with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Mismating-proof coupling heads permanently mounted to the front crossmember, without connecting line to truck Tyres: * 6 pieces, 385/65 R22.5 160J on rim 11.75 x 22.5 (brand of our choice), offset 120 * Basic version tyre pressure monitoring, connected to EBS CAN-bus * Tyre pressure indicator in driver’s cab (pre-installed by chassis manufacturer) Mudguards: * According to EC, PVC mudguards (half-shell) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings mounted on side of outer frame, evenly distributed (tensile strength approx. 10 t) * 13 pairs of lashing points (hoops) in outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/Posts: * 5 pairs of stake pockets recessed in outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with lower stop Front wall: Bsdpfx Agewx Dbpstolg * Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: * Magazine for plug-in stakes inside front wall Floor: * Approx. 28 mm hardwood floor recessed into outer frame, with galvanized omega steel profiles Lighting system: * According to EC, 24 volts with multi-chamber lights * LED side marker lights * White LED position lights at front * LED outline marker lights at rear * License plate lights * 1 × 15-pin and 2 × 7-pin sockets on front crossmember Equipment: * Two wheel chocks with holders * Warning plate according to ECE 70 * 2 LED work lights on lamp carrier (switched via reverse gear) * Bracket for rotating beacon at rear (including rotating beacon) * 1 foldable an

Stanje: novo, največja dovoljena obremenitev: 34.350 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Partial list of equipment. Full equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with reinforced crossmembers, designed for high floor and point loads, with heavy-duty outer frame * Rear loading floor as steel welded construction, with two welded-in external drive tracks made from 5-hole steel sheet (Lohr/Rolfo hole pattern system), approximately 2,250 mm long, hydraulically lowerable by approx. 350 mm * Rear of the vehicle features an integrated loading platform, extendable by approx. 1,500 mm hydraulically; steel welded construction with 5-hole steel sheet cover (Lohr/Rolfo hole pattern system), integrated lights, two ramp storage compartments, and ramp supports * Rear end drive and control via electrical-hydraulic power pack, mounted in a stainless steel box on the left side of the chassis, with radio remote control * Power supply from the tractor unit’s vehicle battery (NATO socket on the front wall, without connecting cable to the truck) Coupling Device: * 2-inch king pin, replaceable from below Underride Protection: * Fixed installation as per EU regulations Landing Legs: * 2 x 12 t support legs with 2-speed gear Axles: * 3 x 9 t air-suspended axle units * SAF brand with disc brakes approx. 370 x 45 mm * ABS * 10-hole centrally located wheel bolt circle, ET120 * Total air suspension stroke approx. 310 mm, with lift approx. 220 mm and lowering approx. 90 mm * Air suspension control via hand lever with stop function Lifting Axle: * 1st and 3rd axles can be lifted automatically, also manually via control at the chassis frame or via PIN 12 of the light socket Tyres: * 6 units, 445/45R19.5, fitted on 14.00x19.5 rims, 10 holes, ET120 Mudguards: * As per EU standards, 1/4 PVC mudguards * 1st axle front and rear; 2nd and 3rd axles rear Brake System: * Wabco brand * Dual-circuit braking system in accordance with EU regulations, with EBS and automatic load-dependent control * Spring-actuated parking brake active on 2 axles * Reversed coupling heads solidly mounted on front crossmember, no connection line to truck Lighting Equipment: * As per EU standards, 24 Volt * Multi-chamber tail lights Bedpfx Aewt Iylsgtelg * Number plate lights * LED side marker lights * White LED position lights at the front and LED lane marker lights at the rear * 15-pin socket and 2x7-pin sockets firmly attached to the front crossmember, no connecting lines to truck Load Securing: * 9 pairs of foldable lashing rings evenly distributed, traction approx. 8 t * 8 pairs of foldable lashing rings evenly distributed, traction approx. 2.5 t * 2 pairs of foldable lashing rings at the rear, traction approx. 2.5 t * On the outer frame, holes for lashing straps every approx. 500 mm Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pocket Sockets: * 8 per side recessed into the outer frame * 4 rows of sockets transversely across the loading area Floor: * Approx. 28 mm Z-hardwood floor, recessed in outer frame Front Wall: * Solid front wall * Storage for 16 plug-in stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders * 2x PVC toolbox, approx. 600/400/500 mm * Rear rotating beacon holder incl. beacon * 2 LED reversing lights (at rear) * 2 aluminum loading ramps, approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair

Stanje: rabljeno, lastna masa: 14.100 kg, največja dovoljena obremenitev: 33.900 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/1999, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 50 odstotek, barva: zelen, Leto izdelave: 1999, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 68575 Nooteboom, Euro standard * Year of manufacture: 1999 * ABS (Anti-lock Braking System) * Air suspension * Suspension type: Air Bsdpfsyibz Rjx Agtolg * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload capacity: 33,900 kg * Permissible gross weight: 48,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 50% -- 50%, tire size: 235/75 R17.5 * Tire condition, 2nd axle: 40% -- 40%, tire size: 235/75 R17.5 * Tire condition, 3rd axle: 50% -- 50%, tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Body manufacturer: ES-GE * 3rd axle hydraulically forced-steered * Extendable up to 9,950 mm * Telescopic extension defective * Loading platform length: 10,990 mm Disclaimer: Specifications subject to change, prior sale, and errors excepted. More images and videos are available on our website. Our comprehensive service portfolio includes: * Purchase, sale, and rental of commercial vehicles * Fast and straightforward financing solutions * Processing of all (export) documents * Ordering of export and customs license plates * Vehicle preparation: new tarpaulins, signage, resprays, etc. * Professional loading and load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialist staff; we are happy to advise you.

Stanje: rabljeno, največja dovoljena obremenitev: 31.760 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2012, naslednji pregled (TÜV): 09/2026, Oprema: ABS, Celotni naš vozni park z vozili, ki so takoj in kratkoročno na voljo, je objavljen na naši spletni strani. Izvleček iz opreme. Celotna oprema na zahtevo. - BPW osi - Kolutne zavore - Zračno vzmetenje - 1 dvižna os - 2-palčni zatič - Edscha streha - Premična cerada - Zadnja portalna vrata - Alu platišča - Zaboj za palete za 30 palet Bledpfoyrwdiox Agteg - 1 PVC zaboj - Žepi za stebričke - ABS - Zadnji portal se lahko razširi za nakladanje in razkladanje - Tehnični pregled: 03/2027

Stanje: rabljeno, največja dovoljena obremenitev: 31.710 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2016, skupna širina: 2.550 mm, Oprema: ABS, Our complete vehicle inventory with immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Full equipment details available on request. - Chassis wedge-shaped, increased point load approx. 25,000 kg over approx. 5,000 mm - 24,000 kg telescopic support winches with load and rapid operation - Lashing points available in 5,000 kg, 6,000 kg, and 10,000 kg variants Bodpfx Ajy Dy Ehogtelg - 8 stake pocket inserts (for second bulkhead) - Aluminum roof bow with sliding tarpaulin - Rear stakes extendable up to approx. 3,500 mm, for loading and unloading only - Three sliding stakes per side - End stakes longitudinally extensible in direction of travel - Bulkhead fully designed as storage compartment with integrated shelving system, closed on the inside - DINKEL mechanical hydraulic lifting roof, height-adjustable. Lifting roof height: 400 mm, operable from both sides or one side - Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm), height-adjustable within the stake pockets - Trailer moveable under tarpaulin up to a total height of approx. 4,400 mm (rear side open above tail lift) - Upper portal cross member with movable sliding tarpaulin - Four rows of stackable 150 mm aluminum slats on each side (in raised bed, only 2 rows), lower: 450 pockets, above: 4 rows of pockets, evenly spaced - WABCO air brake system with EBS, EC-regulation 71/320 EEC incl. PREV - Air suspension in ECAS version, with raise and lower function - Wabco Smart Board with axle load indicator and hubodometer - 3 x 10,000 kg SAF axles with drum brakes - 3rd axle as friction-steered trailing axle - 1st axle liftable - Tires: 235/75 R 17.5 - Dhollandia heavy-duty tail lift type DHLSU, lifting capacity 9,000 kg – load distance 1,000 mm, steel platform approx. 3,000 x 2,500 mm - Hydraulic additional support, automatic ground leveling - Tail lift with ramp function for platform tilting, can be used as a drive-on ramp – loadable up to max. 13,500 kg - Chassis painted in MB-Novagrau - Superstructure with white tarpaulin featuring customer branding

Stanje: rabljeno, največja dovoljena obremenitev: 69.060 kg, skupna masa: 84.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2013, naslednji pregled (TÜV): 07/2026, skupna širina: 2.540 mm, Oprema: ABS, Celotno zalogo vozil, ki so na voljo takoj ali v kratkem času, najdete na naši spletni strani. Izvleček iz opreme. Celoten seznam opreme je na voljo na zahtevo. • Šasija iz visokokakovostnih QSTE drobnozrnatega jekla, s centralnim nosilcem, ni teleskopska • Pritrdilne zanke, pritrdilna sila približno 100 kN na zanko, zložljive • 4 pari žepov za stebre v območju nakladalnih stojal, približno 80 x 80 mm • Hidravlične opore (elektro-hidravlične) • 6 x 11.000 kg (tehnično), SAF osi • Zračno vzmetenje • 1. os vodilna, 2. os toga • 3. – 6. os prisilno vodene • Tridec krmiljenje • Dodatno krmiljenje • Nato vtičnica Bledpfx Ajy Ikbhsgtog • 1. os dvižna • Pnevmatike 265/70R19.5 • 3,5-palčni zatič, zamenljiv • Wabco ABS/EBS zavore • Jeklena sprednja stena, približno 400 mm visoka • 2 stranski steni na labodjem vratu • Barvanje enobarvno v RAL 3000 rdeči barvi

Stanje: novo, največja dovoljena obremenitev: 15.825 kg, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles, including units available for immediate or short-term delivery, on our website. Excerpt from equipment specification. Full equipment details available upon request. Chassis: Bledpfx Agsy Auhbetjg * Steel welded construction made of welded longitudinal beams and punched Z-cross members, close cross member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly under the load floor, two insertion slots for one ramp each, with locking plate in the rear header frame Underride guard: * According to EC regulations Front landing gear: * Single-sided operated landing legs Rear support: * Two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, manufacturer SAF, drum brakes approx. 300 x 200 mm, hub-centered wheel fixing for twin tyres, ABS, total air suspension travel approx. 200 mm (raise approx. 140 mm, lower approx. 60 mm), operated by hand lever with ratchet function Tyres: * 8 units, 235/75R 17.5 – make as per our choice, on steel rims 6.75 x 17.5, fitted with offset Splash protection: * PVC spray guards in front of and behind axles, EC compliant Load securing: * On the outer frame approx. every 150 mm a hole for lashing straps, tensile strength approx. 2.5 t (lashings can be hooked in with side walls closed, bevelled outer frame) * 6 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 8 t * Stake pockets for removable stanchions 80/50: 3 pairs of stake pockets on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EC regulations with EBS * Two spiral hoses as connection to the towing vehicle with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame Front wall: * Made from 25 mm removable front board Lighting system: * Lighting in accordance with EC regulations, 24 volt, multi-chamber tail lights, number plate lights, side marker lights and lane control lights at the rear, connection plate on the left of the drawbar including connection cable with 15-pin and two 7-pin plugs Accessories: * 2 wheel chocks with holders * Removable warning beacon at the rear * Additional 40 mm coupling device supplied (max. GVW 13,500 kg) * Rear extension approx. 800 mm including underride guard, extendable loading platform with load capacity approx. 2 t, locking positions every approx. 200 mm * Mechanically adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolt-on towing eye approx. 50 mm as per DIN 74053 * 4 rows of crosswise stake pockets evenly distributed across the loading platform * 12 removable stanchions made of galvanized pipe, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for one 20’ container, container locks extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair aluminum ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 pieces of 25 mm side walls and a rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm), includes side wall holder at front wall Paintwork: * Chassis shot-blasted, cleaned, and hot-dip galvanized to latest standards * Structure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized & RAL 3002 carmine red * Side walls: RAL 3002 carmine

Stanje: novo, največja dovoljena obremenitev: 63.960 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment features. Full equipment details available upon request. Chassis: * Welded construction made from high-quality steel profiles with punched cross members, designed for high point load capacity * Outer frame: UNP steel Towing device: * 2-inch king pin Underrun protection: * In accordance with EC regulations, bolted design Side impact protection: * In accordance with EC regulations Landing legs: * Landing legs with single-side operation, support load approx. 66 t/lifting capacity approx. 24 t Axles: * 5 x 10 t air suspension axle assemblies, SAF brand, with drum brakes approx. 400 x 200 mm * ABS * Centrally located 10-hole wheel connection with offset ET 0 * Total air suspension lift approx. 200 mm, raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with lock function Steering: * 1 axle self-steering at the front, 2nd axle fixed, 3rd, 4th, and 5th axle forced steered via linkage * Centralized lubrication points positioned externally Axle lift: * First and second axles can be raised automatically, with additional deactivation on the chassis Brake system: * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, Wabco 4S/3M brand * Spring chamber cylinders as parking brake, anti-mistake coupling heads permanently mounted to the front panel, without connection line to the tractor unit * Aluminium air reservoirs Tyres: * 10 x 445/65 R22.5 164J on 11.75 x 22.5 ET 0 rims – Manufacturer of our choice TPMS: * Tyre Pressure Monitoring System (TPMS) according to ECE R141, with data transmission to the tractor unit Mudguards: * In accordance with EC, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axle each front and rear with a 1/4 PVC mudguard * Rear mudguards with spray flaps Blodpfxswx Dcae Agtog Load securing: * 5 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 14 t) * 11 pairs of hook plates welded into the outer frame (lashing capacity approx. 3 t) * 10 pairs of side lashing rings welded into outer frame, evenly distributed (lashing capacity approx. 8 t) Stake pockets: * 10 pairs of stake pockets recessed into the outer frame * 6 pairs of stake pockets recessed into the floor (on the outer longitudinal frame) Insertable stakes: * 16 galvanized insertable stakes, approx. 80 x 80 x 8 mm, approx. 850 mm usable length Stake magazine: * One magazine for 8 insertable stakes (approx. 80/80 mm) on each side in front of the front wall Front wall: * Bolted corner posts, filled with aluminium hollow profiles, internally with a steel impact plate over full width and height Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame, flush-mounted Lighting system: * According to EC, 24 Volt with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline lights rear * Number plate lights 1x15 and 2x7-pin connector at the front panel Equipment: * Two wheel chocks with holder * Warning panel as per ECE 70 * Work spotlight on light carrier (activated by reverse gear) * Holder for rotating beacon at the rear (including beacon) * Fixed access ladder on both left and right, including plug-in step * Smart Board * Sticker: "Vehicle swings out" and load center of gravity indication Paintwork: * Chassis and front wall blast-cleaned and high-quality top-coated * Chas

Stanje: novo, največja dovoljena obremenitev: 56.570 kg, skupna masa: 66.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Extract from the equipment features – full specifications available upon request. Chassis: - Chassis frame construction made of welded longitudinal beams and pass-through cross members - Rear under-run bar approx. 700 mm wide - Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams - Cross member spacing max. 400 mm (for longitudinally laid floor) - King pin 3.5 inch according to SAE standard, replaceable - Outer frame as UNP 200, open to the outside Landing Gear: - 24 t telescopic landing gear JOST -MODUL CH (Heavy Duty) S-foot Axles: - 4 x 10 t SAF axles with large drum brake - 22.5 single tires - Axle distances approx. 1,700/1,810/1,810 mm - Air suspension unit, each with 10 t lifting capacity, lifting and lowering device with 1 rotary slide valve Knorr/Wabco - Holder for lifting and lowering device, bolted version Brake: - Smartboard/TIM/Infocenter at the lifting/lowering gear bracket, in addition to the lift/lower valve, without battery (operable only with towing vehicle) - Holder for light and brake at the front, mounted on the underrun bar, total height approx. 700 mm - Tire pressure monitoring basic version, connected to the EBS CAN bus system - With dual release valve for brake and spring actuator - Test nipple for brake cylinder pressure at right front brake cylinder - 1 red and 1 yellow coupling head each - Lifting/lowering device mounted in driving direction rear left - EBS braking system Wabco make, CAN bus EBS diagnostics (EBS plug), no diagnostic cable led outside! Tires: - 8 x 445/65 R 22.5 premium brand tires of our choice - Central centering Lubrication: - Grease nipple strips at the bogies and at the steering front. No central lubrication Superstructure: - Without body certificate according to DIN EN 12642 XL - 2x LED work lights on top of the front wall (facing rear), switch at the lift/lower bracket - Front wall for platform, reinforced version - Side contour marking yellow, rear yellow - Front wall approx. 800 mm high, with sheet metal cladding, bolted version Lighting: - 2x LED work lights, mounted in lamp panel, switched via reverse gear - 2x LED work lights, switched via reverse gear, 1 each side near landing gear - 2x LED reversing lights, 1 per side in front of the 1st axle Bjdowx Dctspfx Agtslg - Lighting/wiring system brand of our choice - Number plate lighting - The towing vehicle must provide sufficient electrical capacity for the chosen lighting (esp. reversing light) - Position marker lights at the front, lower, white, 1 per side left and right (LED) - 24V lighting system with large multifunction rear lamp - Side marker lights (LED) flashing - 1x 15-pin and 2x 7-pin sockets in multifunction box at the front - EBS socket output - 1 pair lane keeping lights (LED) Floor: - Hardwood floor approx. 28 mm, alternating with galvanized omega steel profiles Paint/Coating (no metallic shades): - Chassis painted in RAL color of choice - Front wall (steel construction) in RAL color of choice - Axle hubs matching chassis color - Axles and landing gear black - Wheels in aluminum/silver similar to RAL 9006 - Wheel nuts untreated - Under-run protection painted RAL 9010 pure white (aluminum) Accessories: - Lifting device for 1st axle - 9 welded lashing plate hooks per side in the outer frame, lashing capacity max. 3,000 daN each - 12 RUD-SLP lashing points per side with

Stanje: novo, številka stroja/vozila: 087c7b6bc0c6118a84279fb46, lastna masa: 4.100 kg, Further Information Bjdpsi Riytefx Agtjlg Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without raised edges, loading area tapered downward after the rear axle by approx. 8°. Longitudinal beams made from steel sections. Steel frame, hot-dip galvanized, with stainless steel sheet at the bend for cable guidance, flush with the platform floor. Suitable for trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm. Tow Coupling Tow coupling, ball head D24.8: (height from ground to top approx. 480 mm), towing capacity 2,800 kg, including installation and electrics with 7-pin socket. Accessories/Conversions 2 brackets for wheel chocks, folding side underrun protection in aluminum – adopted from the truck! Rear under-run protection in steel, quarter shell fenders with mudflaps – adopted from the truck! Toolbox Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (lock not included). 1 holder for 3 fuel canisters. 1 stainless steel toolbox, w=600 / h=400 / d=500 mm, with polished door, lockable, includes control valve and electrohydraulic power unit. Controller box with peripheral door seal and sealing grommets at the rear (splash-proof as technically possible). Electrics Adaptation of existing taillights, 2 additional recessed LED work lights in the bulkhead, switched via parking light with switch outside on front wall, left side. 1 LED work light at the rear, with integrated reversing camera, including color flat screen monitor, monitor with suction cup mount and power supply via 24 Volt, voltage divider 24/12V, 1 x 7-pin 12V socket = plug adapter. Flooring Mega Grip made from serrated galvanized grating, steel floor gratings 50/4 including mesh size 50 mm. Top with anti-slip serrations, laid continuously over main frame platform. Lashing Points 12 pairs of swivel-mounted lashing rings in the outer frame – each 10 tons, first ring at the very front, last at the very rear. 1 lashing ring centrally at the rear for fastening winch cable. 12 lashing rings recessed in the floor, each 5 tons (not in rear bevel). Bulkhead Bulkhead made from sheet steel, height 1,500 mm. Fixed with corner posts at bulkhead height. Each with 2 x 12 hanging brackets for lashing chains mounted left and right on the bulkhead. Winch Electric cable winch, 24 Volt, pulling capacity approx. 6,350 kg, mounted centrally at the bulkhead (recessed with loading bridge), operated by radio remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, cable pressure plate, incl. overload protection, winch freewheel clutch, handheld control with approx. 5 m cable, winch acceptance certificate, civil engineer test report, logbook, and operating instructions. Ramps Length 3,500 mm – 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg/pair (also for ramp loading), electrohydraulically foldable and laterally adjustable – incl. electrohydraulic power unit. Approach angle approx. 8° with lowered rear axle. Ramp platform made of galvanized steel grating (as platform floor), with anti-slip serrations. Ramps can be pushed together to approx. 170 mm, ramp extension hydraulically. Ramps preconfigured for use at loading docks with full load capacity. Ramp locking with 2 lashing straps. Ramp tip stepped (nose min. 150 mm) for use at loading docks. Operating instructions included. Ramps lowering valve for ramp lowering. Support Adjustable support legs at rear, foldable and length-adjustable

Stanje: rabljeno, največja dovoljena obremenitev: 31.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2007, Oprema: ABS, * Inquiries welcome via WhatsApp * Trailer for interchangeable compactors * Manufacturer: H&W * Model: HWDCSS39 * Disc brakes * ABS * Lift axle Bodpfehy R Swsx Agtslg * Steering axle * Hydraulic extension cylinder * 4 x container locks (twistlocks) * Unladen weight: 7,200 kg * Tyres: 385/55R22.5 approx. 80-70-80% tread * German vehicle * New price: 73,000 EUR * Net sales within the EU will only be carried out with VAT deposit and proof of registration in the destination country (confirmation of arrival required). * Sale exclusively to businesses. This offer is non-binding and subject to prior sale. Errors and intermediate sale reserved. * No guarantee for input errors. Transport to port possible. * Viewing by appointment only. Contact via WhatsApp.

Stanje: rabljeno, lastna masa: 9.140 kg, največja dovoljena obremenitev: 28.860 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2007, dolžina tovornega prostora: 11.600 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: v tranzitu / na poti, 2 osi, zračno vzmetenje, zadnja os vodilna, ABS (protiblokirni sistem), razširljiv do 3 m, pritrdilna ušesa, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, podpore, dvojna montaža pnevmatik. Nadgradnja: 2-osna nizkopodna polprikolica s hidravličnimi rampami. Vse informacije brez garancije, ker je polprikolica v tranzitu! Podatki o dodatni opremi brez garancije, spremembe, vmesna prodaja in napake pridržane! Blsdpjyzgndjfx Agtsg

Stanje: rabljeno, številka stroja/vozila: W09BLH3556EE32123, Leto izdelave: 2006, Contact Theo Lelie for further information. Bodpfjy Dgkqsx Agtjlg

Stanje: rabljeno, največja dovoljena obremenitev: 36.250 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2015, dolžina tovornega prostora: 12.350 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 800 mm, skupna širina: 2.550 mm, skupna višina: 3.030 mm, Oprema: ABS, Meusburger kesonska polprikolica s 3 osmi Tip: MPS-3 Zavorni sistem: kolutne zavore Nosilnost: 36.250 kg Bjdpfxey Iibts Agtolg Os: BPW 1x dvižna os 2x podporni točki Keson: Dolžina: 12,35 m Širina: 2,49 m Višina: 0,80 m Z veseljem vam pomagamo tudi pri financiranju/leasingu skupaj z našimi partnerji. Vse informacije so brez garancije. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: novo, Leto izdelave: 2026, Equipment: BDF ZAA 2-Axle Swap System Chassis 1120-1320 - Distance between twist locks (width): 2259 mm - Distance between twist locks (length): 5853 mm - Wheelbase: 1420 mm - Support height: 1120-1320 mm - Special lift: 450 mm - Driving height: approx. 1110 mm - Tyres: 385/55R22.5 retread - Coupling height: 400 mm - Gross weight: 18,000 kg - Manufactured according to EN 284 for C745/C782 retread - Unladen weight: 3270 kg - Rubber-steel bump stops at rear - Guide rollers – 2 pairs - Bolted towing drawbar without longitudinal adjustment - Side underrun protection made of steel, Wielton design - Support height: 1120-1320 mm - Frame made of high-strength S700 steel, hot-dip galvanized. Container chassis with individual locking devices (twist locks) for securing swap bodies. - Wheelbase: 1420 mm - Coupling eye Ø50 mm, height-adjustable - Rear underrun protection made of galvanized steel - Adjustable front bumper, suitable for bodies C745 / C782 - Steel lamp bracket Axles and suspension - Number of axles: 2 - BPW axles, 2 x 9000 kg, 22.5", with disc brakes - Large air suspension stroke (450 mm) Landing legs - 2 SAF steel crank landing legs at front - 2 SAF steel crank landing legs at rear Mudguards - Single-wheel plastic mudguards Rims - 4x steel rims 22.5-11.75 ET-120 Tyres - Hankook 385/55R22.5 Other chassis features - Marking plates as per ECE - Chocks with handles, installed - Two toolboxes (145 l Aberg), on both sides in front of axles Braking system / Pneumatics - Wabco braking system with basic modulator with RSS/RSP - Steel air reservoir - Duomatic coupling - HS valve, mounted in front of axles on left side (driver’s side) Chassis paint - Frame hot-dip galvanized Electrics - Partial LED lighting Aspöck - EUROPOINT III - Hybrid lamp version (LED + bulb) - Position lights in LED technology - Other functions via bulbs - Wiring swing arm, right side (passenger side) - Electrical connectors: 15-pin and EBS. System meets ADR requirements - LED work lights controlled via switch on HS console. 5 total: 2 rear each side, behind axles; 2 front each side, before axles; 1 centrally mounted front of rear container carrier TPMS / Tyre monitoring - System for monitoring tyre pressure and temperature for semitrailers and trailers. Manufacturer: ABERG Connect. System includes TPMS sensors (pressure & temperature) mounted on rims and a device connected to the EBS. - Suspension load-relief system (Bounce Control) Marking - Partial contour marking with Wielton logo - Partial side contour marking white Blsdoyv Ttispfx Agtsg - Partial rear contour marking red Warranty period for ON-ROAD/OFF ROAD products: - 24 months for the complete product from initial registration date - 36 months on the vehicle frame from initial registration date (except surface rust) - 10 years corrosion perforation warranty for the chassis (corrosion from inside to outside) - Guarantee: 24 months from registration, excluding wear parts, subject to technical inspection after 12 months. Warranty on axles as per manufacturer’s specifications. - Delivery ex works EBB, Heilbronn All information without guarantee. Subject to errors and prior sale.

Stanje: rabljeno, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2013, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, Schmitz Cargobull S01 platforma z dvižno osjo, aluminijaste stranske stranice, nosilci PREVOZ JEKLA Int. št. za povpraševanja: 0326236 * ABS * EBS * 3 osi z zračno vzmetenjem * Dvižna os * Kolutne zavore * BPW osi Blsdpfoyulw Njx Agteg * Aluminijaste stranske stranice * Nosilci / stebrički Dolžina tovornega prostora: Dolžina: 13.600 mm Širina: 2.520 mm Pnevmatike: 1. os: 385 / 65 R 19,5 20 % zračno vzmetenje / dvižna os 2. os: 385 / 65 R 19,5 20 % zračno vzmetenje 3. os: 385 / 65 R 19,5 20 % zračno vzmetenje ----Cena: 9.900,- EUR + 19 % DDV Za dodatna vprašanja nas lahko kontaktirate na naslednjih telefonskih številkah: * Govorimo: nemško, angleško, francosko, poljsko in ???? Pridržujemo si pravico do napak, sprememb in vmesne prodaje.

Stanje: novo, lastna masa: 7.300 kg, največja dovoljena obremenitev: 26.700 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Šasija: vroče pocinkana, lesen pod s 70 mm debeline, 18 pritrdilnih obročev, 12 žepov za kole, 2 rampi, vsaka dolžine 3.110 mm x 760 mm širine, plezalni trak na zunanji strani ramp in zadnji klančini, hidravlične enodelne rampe, višina nalaganja: 880 mm, vključuje prikazovalnike obremenitve osi. Doplačila: zadnja os kot krmiljena os: 3.500 €, opozorilne table + razsvetljava in rotacijska luč: 200 €, razširitev na 3 m z lesenimi vložki: 300 €, hidravlični premik ramp: 1.000 €. -- Pridržujemo si pravico do napak v tisku, sprememb in dopolnitev, slike so simbolične -- Več podatkov na:! Bjdpfey Irxzjx Agtslg

Stanje: rabljeno, lastna masa: 5.440 kg, konfiguracija osi: 3 osi, prva registracija: 08/2018, dolžina tovornega prostora: 7.040 mm, širina tovornega prostora: 2.550 mm, prostornina tovornega prostora: 17 m³, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 140J, velikost zadnje pnevmatike: 235/75R17,5 140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Customer vehicle, -- typographical errors, mistakes, and changes excepted, sample images --, more data at: !, More details: ! Bedpfxsy Iryxs Agtelg

Stanje: novo, lastna masa: 6.950 kg, največja dovoljena obremenitev: 24.050 kg, skupna masa: 31.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Podvozje: vroče pocinkano, lesen pod debeline 70 mm, 18 pritrdilnih ušes, 12 žepov za stebre, 2 rampi vsaka dolžine 3.110 mm x širine 760 mm, hidravlični enodelni rampi, nakladalna višina: 880 mm, vklj. z indikatorji obremenitve osi. Doplačila za: zadnjo krmiljeno os: 3.500 €, opozorilne table + osvetlitev in rotacijska luč: 200 €, širitev na 3 m z lesom: 300 €, hidravlični pomik ramp: 1.000 €. Na voljo tudi z vlečno uho K80! -- Pridržujemo si pravico do tiskarskih napak, sprememb in napak. Prikazne slike -- Več podatkov na zahtevo! Bsdpey Irzvjfx Agtjlg

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.200 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Skupna dolžina nakladalne površine ca.: 8.200 mm, Globoko ležišče ca.: 6.000 mm dolgo, Nakladalna višina pod obremenitvijo ca. 890 mm, 22 x pritrdilna ušesa po 10 t, 10 x žepov za stebre v zunanjem okviru, Vzpenjalne rampe (ca. 3.100 x 750 mm), Protizdrsna letvica na zunanji strani ramp in zadnje poševnine, Vzpenjalne rampe nastavljive bočno, Lesen pod debeline 68 mm, Shrambna škatla s pokrovom za pritrdilne verige ali napenjalne pasove, Obrisno označevanje po predpisih, Vozilo pocinkano z vročim potopom, vklj. z indikatorji obremenitve osi, Doplačila za: opozorilne table z razsvetljavo in rotacijsko lučjo, Razširitev na 3 m z lesom, Cena: 500 €, Hidravlično premikanje ramp, Cena: 1.000 €, Izrez za bagrovo roko, Cena: 1.000 € neto, -- Tiskarske napake, napake in spremembe pridržane, vzorčne slike --, Več podatkov na: !, Več podrobnosti na: ! Blsdpfx Agjy Irz Astsg