Ergoplus 4 M nakup rabljenega (101.404)

Stanje: dober (rabljeno), MIG/MAG torch package -Length: 4 m -Tuchel connector: 3-pin Kjdpfob A Sz Tox Agfonb -Gas-cooled -Weight: 4 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 34.000 mm, skupna višina: 4.500 mm, višina police: 4.500 mm, število vrst polic: 4, prostor za palete: 108 evropske palete, višina okvirja: 4.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 4 vrste paletnih regalov (4 x M45112711-2) v vsaki dolžina 8,5 m, višina 4,5 m, globina 1,1 m, v vsaki 3 polja, širina 2,7 m, v vsaki 2 prečni nivoji, nosilnost police 3000 kg. - 16 okvirjev (RM4511 - RAL5019) - 32 osnovnih plošč, podložni material, pritrdilni material - 64 talnih sider (ZZBA1210) - 48 posameznih prečk (T27114 - RAL2008) - 4 tablice o nosilnosti (BSMcP) Knsdpez Dr Naefx Agfjb Okvirji so vijačeni, niso predmontirani. Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - dostava na gradbišče / mesto montaže - razkladanje iz tovornjaka opravi kupec z lastno dvižno opremo. - dostave po celotnem območju Nemčije, razen otokov! - dobava v države EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 2.050 kg, skupna dolžina: 158.200 mm, skupna višina: 4.000 mm, razmak između stupova: 2.700 mm, višina police: 4.000 mm, število vrst polic: 7, prosta razpetina: 2.700 mm, nosilnost: 4.100 kg, višina okvirja: 4.000 mm, obremenitev na par nosilcev (maks.): 2.050 kg, Paletni regalni sistem: 7 x dvojnih vrst po 4 polja Višina 4 m, po 2 prečni nosilci (svetla širina 2700 mm) Obseg: 70 okvirjev, višina 4 m (RM4011) 280 talnih sider Ksdpfx Aez Anktsgfenb 70 distančnikov za dvojne vrste 224 prečnika, dolžina 2,7 m, višina 0,09 m (TR27094) 14 oznak nosilnosti Dobava z dostavo na gradbišče Okvirji privijačeni, niso predmontirani Prevoz / Dobava: - največ 20 delovnih dni po prejemu plačila - dostava na gradbišče / mesto montaže - Razkladanje iz tovornjaka opravi kupec z lastno dvižno napravo - Dobave po celotnem območju Zvezne republike Nemčije, razen otokov! Dobave v države EU po posameznem dogovoru.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 44.800 mm, skupna višina: 4.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 4.500 mm, prosta razpetina: 3.600 mm, razmak između stupova: 3.600 mm, širina okvirja: 1.100 mm, višina police: 4.500 mm, dolžina police: 44.800 mm, dolžina opore: 3.600 mm, 4 vrste regalov za palete (M45113615-3) dolžina 11,3 m, višina 4,5 m, globina 1,1 m, 3 polja, širina 3,6 m, 3 nivoji nosilcev, nosilnost 3000 kg. - 16 okvirjev (RM4511 - RAL5019) - 32 podstavnih plošč, podložni material, vijaki - 64 talnih sidrnih elementov (ZZBA1210) - 72 posameznih nosilcev, dolžina 3,6 m (T3615 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so priviti, niso vnaprej sestavljeni. Kodozvunrspfx Agfonb Prevoz/dostava: - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča/mest montaže - raztovarjanje z tovornjaka opravi kupec z lastno dvižno napravo - dostave se izvajajo na celotno ozemlje Zvezne republike Nemčije; razen na otoke! Dostave v države EU se izvajajo po predhodnem dogovoru.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 44.800 mm, skupna višina: 4.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 4.500 mm, prosta razpetina: 3.600 mm, razmak između stupova: 3.600 mm, širina okvirja: 1.100 mm, višina police: 4.500 mm, dolžina police: 44.800 mm, dolžina opore: 3.600 mm, 4 vrste regalov za palete (M45113615-3) dolžina 11,3 m, višina 4,5 m, globina 1,1 m, 3 polja, širina 3,6 m, 3 nivoji nosilcev, nosilnost 3000 kg. Knodezrr Nfopfx Agfob - 16 okvirjev (RM4511 - RAL5019) - 32 podstavnih plošč, podložni material, vijaki - 64 talnih sidrnih elementov (ZZBA1210) - 72 posameznih nosilcev, dolžina 3,6 m (T3615 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so priviti, niso vnaprej sestavljeni. Prevoz/dostava: - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča/mest montaže - raztovarjanje z tovornjaka opravi kupec z lastno dvižno napravo - dostave se izvajajo na celotno ozemlje Zvezne republike Nemčije; razen na otoke! Dostave v države EU se izvajajo po predhodnem dogovoru.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 44.800 mm, skupna višina: 4.500 mm, razmak između stupova: 3.600 mm, višina police: 4.500 mm, število vrst polic: 4, prosta razpetina: 3.600 mm, višina okvirja: 4.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 44.800 mm, dolžina opore: 3.600 mm, 4 vrste regalov za palete (M45113615-3) dolžina 11,3 m, višina 4,5 m, globina 1,1 m, 3 polja, širina 3,6 m, 3 nivoji nosilcev, nosilnost 3000 kg. - 16 okvirjev (RM4511 - RAL5019) Knedpjzpfa Sofx Agfjb - 32 podstavnih plošč, podložni material, vijaki - 64 talnih sidrnih elementov (ZZBA1210) - 72 posameznih nosilcev, dolžina 3,6 m (T3615 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so priviti, niso vnaprej sestavljeni. Prevoz/dostava: - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča/mest montaže - raztovarjanje z tovornjaka opravi kupec z lastno dvižno napravo - dostave se izvajajo na celotno ozemlje Zvezne republike Nemčije; razen na otoke! Dostave v države EU se izvajajo po predhodnem dogovoru.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 34.000 mm, skupna višina: 3.500 mm, razmak između stupova: 2.700 mm, višina police: 3.500 mm, število vrst polic: 4, prosta razpetina: 2.700 mm, nosilnost: 9.000 kg, prostor za palete: 108 evropske palete, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 34.000 mm, dolžina opore: 2.700 mm, 4 vrste paletnih regalov (4 x M35112711-2) Vsaka dolžine 8,5 m, višine 3,5 m, globine 1,1 m, vsaka s 3 polji, širina polja 2,7 m, vsaka z 2 nivojema nosilcev, nosilnost polja 3000 kg. - 16 okvirjev (RM3511 - RAL5019) - 32 osnovne plošče, podložni material, pritrdilni material - 64 talnih sider (ZZBA1210) - 48 posameznih prečk (T27114 - RAL2008) - 4 table s podatki o nosilnosti (BSMcP) Okvirji so privijačeni, niso predhodno sestavljeni. Knsdpfx Ajzk Dtmogfeb Prevoz / Dostava: - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča / mesta montaže - razklad tovornjaka opravi kupec z lastno dvižno napravo. - Dobave po celotnem ozemlju Zvezne republike Nemčije, razen otokov! Dobave v države EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 44.800 mm, skupna višina: 4.500 mm, razmak između stupova: 3.600 mm, višina police: 4.500 mm, število vrst polic: 4, prosta razpetina: 3.600 mm, višina okvirja: 4.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 44.800 mm, dolžina opore: 3.600 mm, 4 vrste regalov za palete (M45113615-3) Vsaka: 11,2 m dolžine, 4,5 m višine, 1,1 m globine, po 3 polja, širina polja 3,6 m, po 3 nivoji prečk, nosilnost na polje 3000 kg. - 16 okvirjev (RM4511 – RAL5019) - 32 osnovnih plošč, podložni material, pritrdilni material - 64 talnih sider (ZZBA1210) - 72 posameznih prečk dolžine 3,6 m (T3615 – RAL2008) - 4 tablice s podatki o nosilnosti (BSMcP) Okvirji so vijačeni, niso predhodno sestavljeni. Prevoz / Dostava: - največ 20 delovnih dni po prejemu plačila - dostava brezplačno na gradbišče / mesto montaže - razkladanje iz tovornjaka izvede kupec z lastno dvižno napravo - Dostave po celotnem območju Zvezne republike Nemčije, razen otokov! Dostave v države EU po individualnem dogovoru. Kjdpjzg Am Defx Agfenb

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 34.000 mm, skupna višina: 4.500 mm, višina police: 4.500 mm, število vrst polic: 4, prostor za palete: 108 evropske palete, višina okvirja: 4.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 4 vrste paletnih regalov (4 x M45112711-2) v vsaki dolžina 8,5 m, višina 4,5 m, globina 1,1 m, v vsaki 3 polja, širina 2,7 m, v vsaki 2 prečni nivoji, nosilnost police 3000 kg. - 16 okvirjev (RM4511 - RAL5019) - 32 osnovnih plošč, podložni material, pritrdilni material - 64 talnih sider (ZZBA1210) - 48 posameznih prečk (T27114 - RAL2008) Kodpfx Agozf Dgvsfonb - 4 tablice o nosilnosti (BSMcP) Okvirji so vijačeni, niso predmontirani. Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - dostava na gradbišče / mesto montaže - razkladanje iz tovornjaka opravi kupec z lastno dvižno opremo. - dostave po celotnem območju Nemčije, razen otokov! - dobava v države EU po individualnem dogovoru.

Stanje: zelo dobro (rabljeno), Na prodaj industrijska črpalka priznane znamke Grundfos. Model SPK 4-8 – vertikalna večstopenjska črpalka, namenjena za čiste tekočine, hladilne tekočine, industrijske instalacije ter CNC stroje. Tehnični podatki: Proizvajalec: Grundfos Model: SPK 4-8 A-A-A Moč: 0,55 kW Vrtljaji: 2850 obr/min Pretok: cca 3 m³/h Dvižna višina: do 28 m Temperatura tekočine: max. 90°C Država proizvodnje: Danska Stanje: Rabljeno, delujoče. Vidni znaki uporabe (praskice, manjše sledi korozije – glej slike). Vidna razpoka na ohišju pri priključku – ne vpliva na delovanje (priporočamo preverbo s strani kupca). Kodpoywpahofx Agfjnb

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 2.000 kg, skupna dolžina: 253.000 mm, skupna višina: 7.500 mm, razmak između stupova: 2.700 mm, višina police: 7.500 mm, število vrst polic: 10, višina okvirja: 7.500 mm, obremenitev na par nosilcev (maks.): 2.000 kg, dolžina police: 25.300 mm, dolžina opore: 2.700 mm, 10 vrst paletnih regalov, od tega 4 dvojne vrste in 2 posamezne vrste (10 x M75112711-4) Kodpfezxwrlox Agfonb vsaka vrsta je dolga 25,3 m, visoka 7,5 m, globoka 1,1 m, vsaka vrsta ima 9 polj, širokih 2,7 m, vsaka vrsta ima 4 ravni nosilcev, nosilnost enega polja je 2000 kg. - 100 okvirjev (RM7511 - RAL5019) - 200 podnožij, podložni material, vijaki - 400 talnih sidrnih vijakov (ZZBA1210) - 720 posameznih nosilcev (T27114 - RAL2008) - 2 zaščitni elementi / odbijači (ZRS40901) - 4 bočni zaščitni elementi (ZFL4090D) - 120 distančnikov / povezovalnih elementov za dvojne vrste (ZAbh20) - 10 ploščic z oznako nosilnosti (BSMcP) Okvirji so vijačeni, niso vnaprej sestavljeni. Dobava/prevoz: - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča/montažnega mesta - razkladanje z dostavnega vozila izvede kupec z lastno viličarjem - dostava poteka po celotnem ozemlju Zvezne republike Nemčije; razen na otoke! Dostava v države EU je možna po dogovoru.

Stanje: dober (rabljeno), Leto izdelave: 2013, skupna masa: 560 kg, Tehnični podatki črpalke: • Proizvajalec: KSB • Tip: ETIC D 65 / 45-1 • Zmogljivost: Q = 45 m³/h • Dvižna višina: H = 182,19 m • Leto izdelave: 2013 • Priključki z prirobnicami (vizualno DN150 – v skladu s fotografijami) • Robustna, industrijska konstrukcija • Črpalka odstranjena iz industrijske inštalacije Elektromotor: • Proizvajalec: Siemens • Moč: 37 kW • Napajanje: 3-fazno • Obrati: cca 2950 obr./min (50 Hz) • Industrijska izvedba, hlajenje IC411 • Montaža: IM B3 • Motor nameščen na okvirju s črpalko Stanje: • Tehnično stanje: rabljeno • Vizualno običajni znaki uporabe, brez razpok in poškodb ohišja • Gredi in prirobnice popolne (vidno na fotografijah) • Prodaja kot komplet: črpalka + motor + okvir Dodatne informacije: • Idealno za industrijsko uporabo: tehnološke inštalacije, energetika, kemija, procesna voda Knsdpfx Agsydv I Djfsb • Cena velja za 1 kos.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.250 kg, skupna dolžina: 82.200 mm, skupna višina: 5.000 mm, razmak između stupova: 3.300 mm, višina police: 5.000 mm, število vrst polic: 6, prosta razpetina: 3.300 mm, višina okvirja: 5.000 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.250 kg, dolžina police: 82.200 mm, dolžina opore: 3.300 mm, 2 jednostruka reda paletnih regala + 2 dvostruka reda paletnih regala (8 x M50113313-4) svaki 13,7 m dužine, 5 m visine, 1,1 m dubine, Kedpfx Agezhi Scjfonb svaki po 4 polja, 3,3 m širine, svaki po 3 nivoa nosača, nosivost po polici 3250 kg. - 30 ramova (RM5011 - RAL5019) - 80 osnovnih ploča, podložno materijala, montažni materijal - 20 distancera/spojnica za dvostruke redove (ZAbh20) - 120 anker vijaka za tlo (ZZBA1210) - 144 pojedinačnih nosača (T33135 - RAL2008) - 0 zaštite od udara / zaštite od sudara (ZRS40901) - 6 oznaka nosivosti (BSMcP) Ramovi vijčani, nisu prethodno montirani Prevoz / isporuka: - najviše 20 radnih dana nakon prijema uplate - isporuka na gradilište / mesto montaže - istovar sa kamiona vrši kupac sopstvenim viljuškarom - Isporuke se vrše na teritoriji cele Nemačke osim ostrva! Isporuke u države EU po pojedinačnom dogovoru.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, Oprema: dokumentacija / priročnik, M&R RADICURE D 36/6-4R, zelo malo rabljen, kot nov Knedpfxjwaa Tdj Agfob

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: Kodpsd Tbbdjfx Agfsnb - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard Knjdpfx Aed Tqalogfjb - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) Knedpfx Agofdkbhefsb - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany Knedpfefdkb Tex Agfeb - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. Kjdsguk A Hjpfx Agfenb The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. Kodpfx Agefdkb Uefsnb When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Knjdpsguk Dkjfx Agfeb Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. Ksdpfx Aoguk Dvegfonb The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 253.000 mm, obremenitev na par nosilcev (maks.): 2.000 kg, nosilnost na odsek shranjevanja: 2.000 kg, število vrst polic: 10, višina police: 7.500 mm, višina okvirja: 7.500 mm, dolžina police: 25.300 mm, dolžina opore: 2.700 mm, 10 rows of pallet racks (10 x M75112711-4) Each 25.3 m long, 7.5 m high, 1.1 m deep, Each with 9 bays, 2.7 m wide, Each with 4 beam levels, compartment load capacity 2,000 kg. - 100 frames (RM7511 - RAL5019) Knsdpfsv Uqwdex Agfeb - 200 base plates, shims, assembly bolts - 400 floor anchors (ZZBA1210) - 720 individual beams (T27114 - RAL2008) - 2 impact protections / rack guards (ZRS40901) - 4 side guards (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 20 working days after receipt of payment - Delivery to construction/Montage site free of charge - Unloading from the truck is the responsibility of the buyer, using own lifting equipment - Deliveries made throughout the entire territory of the Federal Republic of Germany; except islands! Deliveries to EU countries subject to individual arrangements.

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 100708, dolžina podajanja os X: 6.300 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 200 mm, skupna masa: 2.500 kg, premer žaginega lista: 700 mm, vhodna napetost: 400 V, izvrtina žagine plošče: 30 mm, Wir bieten diese gebrauchte H&M HM-Z automatische Durchlaufmaschine, Baujahr 2008, an. Maschine: HM-Z Typ: 4-F Seriennummer: 100708 Baujahr: 15.04.2008 Anschluss-Spannung: 400 V Leistung: 19 kW Knjdjy H Dblepfx Agfsb Gewicht: 2.500 kg Luftdruck: 6–10 bar Max. Sägeblattdurchmesser: 700 mm Min. Sägeblattdurchmesser: 600 mm Sägeachsendurchmesser: 30 mm Max. Fräserdurchmesser: 400 mm Min. Fräserdurchmesser: 300 mm Fräserbohrungsdurchmesser: 60 mm Vollständige Überholung in 2024 durch Diba Machinehandel, seither kaum benutzt aufgrund einer zusätzlichen Geschäftstätigkeit. Abgabe wegen Platzmangel. Einlaufbereich im Rahmen der Überholung 2024 auf eine Arbeitslänge von 7 Metern angepasst. H&M Kappsäge: ca. 19,5 x 4 Meter Preis versteht sich zzgl. Demontage, Transport, Montage sowie Zubehör, Klappen, Rohre, Absaugschläuche, Anschlusskabel. Bei Fragen oder Interesse an weiteren Informationen kontaktieren Sie uns gerne per Nachricht oder telefonisch.

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 5.000 kg, dvižna višina: 5.540 mm, skupna dolžina: 6.240 mm, · Operator type: Seated · Max. load capacity: 5,000 kg · Load center distance: 600 mm · Load distance, center of drive axle to fork: 773 mm · Front axle load (laden) / rear axle load (laden): 11,520 kg / 1,805 kg · Front axle load (unladen) / rear axle load (unladen): 3,285 kg / 5,040 kg · Tyres: Pneumatic Knedpexd Exdefx Agfsb · Number of front wheels / rear wheels: 2 / 2 · Number of drive wheels: 4 · Front track width: 1,620 mm · Distance between rear wheels: 1,740 mm · Overhead guard height (cabin) / overall height with low overhead guard (buggy version): 2,486 mm / 2,486 mm · Seat height: 1,455 mm · Fork carriage: DIN 15173 A/B 4A · Aisle width for 1000 x 1200 mm pallet, transverse: 6,812 mm · Aisle width for 800 x 1200 mm pallet, lengthwise: 6,812 mm · Turning radius: 4,640 mm · Travel speed (laden / unladen): 10 km/h / 22 km/h · Lifting speed (laden / unladen): 0.40 m/s / 0.40 m/s · Lowering speed (laden / unladen): 0.50 m/s / 0.40 m/s · Parking brake: Hydraulic · Rated engine power: 55 kW · Manufacturer / engine model / emissions standard: Deutz / TCD 2.9 / Stage V · Rated speed: 2,300 rpm · Number of cylinders / cylinder displacement: 4 – 2,925 cm³ · Auxiliary hydraulic circuit working pressure for attachments: 230 bar · Oil flow for attachment: 97 l/min · Noise level at operator’s ear according to DIN 12 053: 78 dB