Elumatec Mgs142 Mit Pusher nakup rabljenega (9.277)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Bdsdpfx Aeuiy Ngogtsb Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training

Stanje: novo, Leto izdelave: 2026, pritisk: 8 letvica, Bevel angle adjustment horizontal 15°-90°-15°, infinitely variable Saw motor: 5.50 kW (400 Volt) Saw blade: 600 mm Travel range - rear stop: 180 mm Working height: adjustable from 940 to 1000 mm via feet 2 x extraction nozzles (top on the hood & bottom) Net weight: 600 kg Dimensions (W x D x H): 135 x 140 x 150 cm RAL 9007 Grey Aluminum Rotary plate of precision-ground nickel steel Saw head guided by ball recirculation linear guides, offering high accuracy, long service life, and high rigidity. Workpiece clamping under low pressure possible when the hood is open. Hydropneumatic blade feed Chip flow directed to extraction hood. Equipment: Bsdpfogwt S Tex Agtsdb • Precision under-table circular saw • Bevel adjustment: 0º/ 45º/ 90º/ -45º / -60º, infinitely variable • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction device – chip extraction unit • Mist lubrication system for air-oil cooling • Air pistol with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height: 230 mm • Saw blade 600 mm • Saw blade not included in scope of delivery! Our NC pusher system ensures your workpieces are positioned precisely at the desired processing position on our UK 600 HA 90°. A gripper clamp holds the material; the NC controller automatically positions it. Then, clamping and sawing operations are initiated. All positions are pre-programmed into the control system. After the machine completes the operation, it automatically moves to the next cutting position. Depending on the workpiece, multiple parts can be clamped together side-by-side or stacked and positioned simultaneously. You are welcome to inspect the machine at any time in our production/demonstration hall. Please feel free to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK-600-A is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials possible to a limited extent). The machine stands out for its easy operation, quick and convenient material changeover, as well as simple mitre angle adjustment. The UK-600 A offers a continuously adjustable mitre range to the left and right up to 20° (swivel range two times 70°). The saw feed operates automatically at the push of a button, and the material clamping is performed by two pneumatically operated vertical and horizontal clamping cylinders. As standard, the machine includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connection points for a chip extraction system are provided as well. Additionally, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety cover! Equipment • Precision under-table circular saw • Stepless mitre adjustment 0º/45º/90º/-45º/-60º • Includes 2 pneumatic clamps (vertical) • Steplessly adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device • Minimum quantity coolant system for air-oil cooling • Air gun with coiled hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600mm Bdedegwt S Ejpfx Agtsb Our NC pusher system ensures that your workpieces are positioned at the desired machining point on our UK 600 HA 90°. A gripper clamp holds the material, with the NC controller positioning it automatically. Next, the clamping and sawing process is triggered. The positions are pre-programmed in the control system. After the machine completes the machining process, it automatically moves to the next sawing position. Depending on the workpieces, multiple parts can also be clamped either on top of or next to each other and positioned simultaneously. You are welcome to visit the desired system at any time in our manufacturing/showroom. Please do not hesitate to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Leto izdelave: 2018, stanje: rabljeno, Največja dolžina reza: 4.500 mm Največji premer žaginega lista: 380 mm Ročno nastavljanje dolžine z digitalnim prikazom E111 Območje reza pri 90°: 195 x 120 mm Območje reza pri 45°: 135 x 120 mm Bdjdjyz U Sqspfx Agtob Naprava za minimalno mazanje z razprševanjem Pnevmatska vpenjala za material Možni zamiki na obe strani Dvo-ročno upravljanje Stroj je demontiran in nameščen na lesenih nosilcih

Leto izdelave: 1997, stanje: rabljeno, Maks. dolžina reza: 4.500 mm Maks. premer žaginega lista: 550 mm Avtomatsko pozicioniranje dolžine in nastavitev kota preko programskega krmiljenja Motorizirana nastavitev vrtenja na obeh žagalnih agregatih omogoča neposredno nastavitev kotov med 45 in 90 stopinjami Bdedpfsyzhuxex Agtob Nova omrežna krmilna enota iz leta 2019 Naprava za nanašanje minimalne količine sredstva Teža: pribl. 2.200 kg

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, model krmilnika: E555 Touchscreen, skupna masa: 2.300 kg, dolžina rezanja (maks.): 6.000 mm, premer žaginega lista: 550 mm, največja hitrost vrtenja: 2.800 obr/min, TEHNIČNI PODATKI Maksimalna dolžina reza: 6000 mm Premer žaginega lista: 550 mm Hitrost žaginega lista: 2800 vrt/min PODATKI O STROJU Krmiljenje: E555 zaslon na dotik Dovod stisnjenega zraka: 7 barov Bdodpfx Agjy Egahoteb Dimenzije in teža Dimenzije (D x Š x V): 7500 x 1500 x 2000 mm Teža: 2.300 kg

Leto izdelave: 2003, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1500050182, Elumatec SBZ 150 Profile Machining Centre with 5 Axes for Aluminium Profiles 7.3m Due to a switch in our production to a tube laser system, we are selling our fully functional Elumatec SBZ 150. The last service was performed by Elumatec in March 2026, and the machine has not been used since then. Interested parties are welcome at any time—the machine can gladly be demonstrated and tested here on site. Technical specifications: - X-axis travel: 7,300 mm - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0-90°, fully programmable - C-axis swivel angle: 0-355°, fully programmable - Max. machining length without end-face processing: 7,300 mm - Max. machining length with end-face processing: 6,980 mm - Tool changer with 10 stations, plus a saw blade holder - 8 profile clamps - Tool holding system: HSK63 - Spindle power: 15 kW / 22,000 rpm - Double-layer machining - Minimum quantity lubrication system - Central lubrication - Saw blade: 400 mm The machine is available immediately. Required space: see attached layout. Bdjdpoy Dvq Hsfx Agtob Transport instructions are also included in the attachment; if you have any questions, please contact us at any time. Disassembly, loading, and transport for reassembly purposes should preferably be organised by the buyer. Various tools and aids can be made available by arrangement, as far as possible. All information and dimensions have been provided to the best of our knowledge and belief, but we cannot guarantee their completeness or accuracy! The sale is as inspected, without guarantee, return, or similar. Subject to prior sale.

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Prodaja CNC obdelovalnega centra – Elumatec SBZ 130 Proizvajalec: Elumatec Model: SBZ 130 Leto izdelave: 08/2007 Cena: 24.900 EUR brez DDV Stanje: zelo dobro, redno servisiran s strani pooblaščenega servisa Elumatec v ČR Razpoložljivost: takoj na voljo Dokumentacija: fotografije in video stroja na voljo Opis stroja: Bjdpfx Ageyt E D Tjtsdb Trosni CNC obdelovalni center, namenjen obdelavi aluminijastih in jeklenih profilov. Stroj omogoča učinkovito serijsko proizvodnjo zahvaljujoč nihalnemu načinu obdelave (desno/levo delovno območje). Posebej primeren za proizvodnjo okenskih, vratnih in fasadnih sistemov. Prodajne prednosti: • Stroj je bil ves čas redno servisiran pri pooblaščenem servisu Elumatec v ČR. • Robusna in zanesljiva konstrukcija s težo cca 5,5 t zagotavlja stabilno in natančno obdelavo. • Nihalni način obdelave omogoča bistveno povečanje produktivnosti. • Obdelovalni center je povsem delujoč in pripravljen na takojšnjo uporabo. Tehnične specifikacije: • Število osi: 3 • Revolverska glava za 8 orodij • Največja dolžina obdelave: 6500 mm • Nihalni način obdelave: da (desna / leva stran) • Samodejno pozicionirane vpenjalke: 8 kosov • Moč: 8,5 kW • Moč vretena: 5,5 kW • Največja hitrost vretena: 6000 obr/min • Vpenjalni tlak: 7 bar • Hitrost pomika: – X os: 34 m/min – Y + Z os: 18 m/min • Teža stroja: cca 5,5 t Dodatne informacije: • Možnost pošiljanja dodatnih fotografij in videa stroja • Osebni ogled možen po predhodnem dogovoru

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, skupna masa: 2.492 kg, Metal circular saw from 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It is equipped with a motorized swivel range from 22.5° to 140°, as well as a mobile roller conveyor for efficient part removal. If you are looking for a high-quality saw, you should consider the Elumatec DG 244, which we offer for sale. Contact us for further information. • Cutting length (X-axis travel): 6,000 mm (6.0 m) • Saw blade diameter: 550 mm Bjdpfx Asyv H Tijgtedb • Control: E 355 (2-axis control) • Swivel range: 22.5° to 140° (motorized E-axis) • Software: Module for cross-cuts and overlengths (E355/E555) • Software interface: Integration for window construction software Additional equipment • Short length stop: Included with stationary installation • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m long, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction system: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 15.020 km, moč: 134 kW (182,19 KM), prva registracija: 07/1993, vrsta goriva: dizel, lastna masa: 7.520 kg, konfiguracija osi: 4x4, medosna razdalja: 3.800 mm, naslednji pregled (TÜV): 07/2026, gorivo: dizel, vrsta prenosa: mehanski, vzmetenje: jeklo, Leto izdelave: 1993, Odlično stanje S TÜV Dolžina za nadgradnjo ca. 3,60 m 4x4 pogon na vsa kolesa Listnato vzmetenje Bdjdpfx Agsyzrp Hoteb Avstrijsko vozilo Originalno le 15.020 km Popolno za predelavo v avtodom

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Krožna žaga za kov iz leta 2005. Elumatec AKS 134 ima premer žaginega lista 550 mm vertikalno in 500 mm horizontalno, z največjo višino profila 250 mm in največjim pomikom 830 mm. Če iščete vrhunske rezultate rezanja, razmislite o modelu Elumatec AKS 134, ki ga prodajamo. Za dodatne informacije nas kontaktirajte. Bsdpfx Agoy H Ecdjtodb • Premer žaginega lista (vertikalno): 550 mm • Premer žaginega lista (horizontalno): 500 mm • Največja višina profila: 250 mm • Največji pomik: 830 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dolžina 3.050 mm Širina 900 mm Višina 2.600 mm Maksimalna širina vpenjanja 2.800 mm Minimalna širina vpenjanja 390 mm Višina vpenjalnih letvic 2.300 mm Bdjdpfx Aey Aydhsgtjb Širina vpenjalnih letvic 100 mm Širina spodnjega valjčnega transporterja 120 mm Teža 370 kg Nosilnost 200 kg Priključek za stisnjen zrak 7 bar Poraba zraka 35 l/min

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20404, elumatec AF 222 Za obdelavo prečk in vratnih profilov iz aluminija ali plastike Ročno podajanje rezkalne enote Velik razpon rezanja do 400 mm Neprekinjeno nastavljiva višina mize Materialni prislon je mogoče zavrteti do 60° levo in desno. Izrezovanje do 30° (ostri koti, levo in desno). Fiksacija pri 90° z zatičem. S sistemom za hitro menjavo orodja in "Spindle Lock" za enostavno menjavo orodja Natančna, gladka ter malo obrabljajoča se krožna vodila s krogličnimi ležaji Horizontalno in vertikalno pnevmatsko vpenjanje materiala omogoča prilagodljivost Mejni prislon za štiri različne globine izreza Impulzni sistem hlajenja Premer rezalnega orodja maks. 280 mm Premer izvrtine rezkarja 40 mm Višina profila maks. 165 mm Višina reza 145 mm Globina reza 110 mm Dolžina reza 400 mm Hitrost vretena 2.800 vrt/min Pomik 550 mm 2,5 kW moči pri 400 V / 50 Hz Dovod stisnjenega zraka 7 bar Izhodna moč 2 kW Bdedpfx Ajy Hcb Dogteb Poraba zraka 10 l na delovni cikel, 20 l z minimalno količinsko mazalnim sistemom Dolžina 1.540 mm, globina 905 mm, višina 1.000 mm, teža 248 kg Stroj je pripravljen za obratovanje. Orodje je bilo nabrušeno.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector Bdsdpfxjh R Taqj Agtjb = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) Bdsdpomhhy Nsfx Agtjb - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Tilting Spindle Moulder KÖLLE F45 with Power Feed and Integral Fence Very good condition; the machine comes from a small model-making workshop and has only seen light use. Everything functions flawlessly. All bearings and guides are in good shape, and the machine runs extremely smoothly. Year of construction: 1992. The fence features a jaw that can be adjusted in depth with fine adjustment and a scale, allowing for jointing tasks (e.g., when creating a gluing profile). The entire fence can be precisely and rapidly set using a handwheel and leadscrew, with cutting depth displayed on a digital gauge. Includes spindle lock via lever. The control panel is at eye level. Equipped with AIGNER integral fence. Efficient chip extraction possible with two extraction ports (125 mm and 100 mm). Comes with a 30 mm spindle, continuously tiltable from -5° to 45°. Spindle tilt is motorized, with fine adjustment via handwheel and digital gauge. A 40 mm spindle can also be installed. Reversible spindle rotation (clockwise/anticlockwise). Nationwide personal delivery and demonstration in Germany for €220. Shipping to Austria and other EU countries is available on request. Large table opening, which can be reduced with various rings—allowing safe operation with both large and small tooling. Speeds: 3,000 / 4,000 / 5,000 / 6,000 / 8,000 / 10,000 rpm. Spindle height adjustment is also electric, with fine adjustment by handwheel and digital readout. Includes extendable auxiliary support (2,200 mm long). Bdodpfsy Hxtpox Agtob Very robust and durable build—designed for heavy-duty milling, suitable for any routing task. Optimal power transmission via V-belt drive. Supplied with manual. Comes with 4-roller power feed HAFFNER, type 904. Feed offers both directions and 4 speeds, with individually mounted feed rollers. The machine table is 1,200 mm wide by 1,000 mm deep, with 500 mm table extensions on both sides. Ready for immediate use. 380 V, 6,000 W and 8,600 W via two speeds; equipped with extra powerful motor. Fitted with all necessary safety features, motor brake and emergency stop. Approved by the Wood Trade Association (Holz-BG) and carries the GS safety mark. Machine weight approx. 1,000 kg. Motor protection switch against overload. Professional-grade equipment—not DIY store quality. Optimal, simple, fast, and safe to operate.

Stanje: zelo dobro (rabljeno), Nizkotemperaturni kotel Viessmann Vitoplex/105kw z oljnim kotlom Bdsdpfxswauaxs Agteb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1982, Na voljo je Elumatec dvoglavna kotna žaga za aluminijaste in plastične profile, vključno s pozicionirno enoto E200. Zasuk rezalne glave: 45°, premer rezila: 380 mm, hitrost: 2800 obr/min, največja rezalna zmogljivost: 195 mm/120 mm, najmanjša dolžina reza: 520 mm, teža: pribl. 1000 kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Bjdpfey Hk Thex Agtsdb

Leto izdelave: 2008, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Elumatec SLK 118 3-osé CNC obdelovalno središče za profile. Obdelovalno središče za letve s 3 krmiljenimi osmi; zasnovano za obdelavo aluminijastih ter tankostenskih jeklenih profilov in ekstruzij, aluminija, PVC ter lahko legiranega jekla. Še posebej primerno za podjetja, ki obdelujejo profile Neher za zaščito pred insekti ali želijo avtomatizirati svojo proizvodnjo vrat. Obdelava od zgoraj, obračanje obdelovanca za obdelavo nasprotne strani. Tehnični podatki: Pomik osi X 2450 mm / V max. 36 m/min Pomik osi Y 350 mm / V max. 15 m/min Pomik osi Z 280 mm / V max. 15 m/min Število vrtljajev vretena 18.000 vrt/min. 6,5 KM (4,5 kW) motorizirano vreteno Sistem za minimalno mazanje Dimenzije: 3.100 x 1.850 x 2.250 mm (122" x 73" x 89"). Teža: 1.400 kg (3.087 lbs.). Oprema: PC upravljalna enota z zaslonom na dotik in Windows programsko opremo, 4 vpenjalci materiala Bdjdpfoyr Ai Dox Agtsb Stroj je v izjemno dobrem stanju.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck Bodsykuh Nspfx Agtsdb MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS06, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually programmable settings Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film powerstretch: 120–400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically monitored via control unit Quick-loading IEF system for easy film roll change Film specification: max. external diameter Ø300 mm – height: 500 mm – core Ø76 mm Automatic film cutting unit Bdodpfxjyktv Se Agteb Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height: “Machine with MAST (pallet included) 2,150 mm Height detection via photo sensor or direct input on display Safety bar for emergency stop of drive unit Emergency stop switch according to CE regulations Audible warning signal and beacon when machine starts Fall protection for film carriage Push button for start & stop Machine operation according to CE standards Ø22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All functional parameters adjustable via display - Program change lock - Adjustable machine speed around pallet up to 80 m/min Carriage speed up and down independently adjustable - Carriage up speed: 1.3 to 5.4 m/min - Carriage down speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 layers) - Number of wraps at pallet top (1–10 layers) - Adjustable pallet wrapping height - Film application tension base & top wraps / ascent & descent independently adjustable - Film pre-stretch base & top wraps / ascent & descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (up/down) - Single wrapping (only up or down) - Wrapping cycle with defined start and stop height - Wrapping to a preset height (with photo sensor deactivated) - Wrapping cycle for large-size pallets - Wrapping cycle for top sheet film - Soft start cycle for edge protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start for reducing film tears at sharp pallet edges Wrapping cycle with manual or motor stringing (optional) Further machines available from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. MYTHO EASY Low Very low-profile unit Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Additional demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg. Bdsdpfjx Ta Nxex Agtob

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control Bdedpfx Ageykud Rsteb

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Bdjdpfx Agoyktrtotjb Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Bsdpfx Ajykub Aogtsdb Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.