Elektronska Linija Za Brušenje nakup rabljenega (84.559)

Leto izdelave: 2000, stanje: rabljeno, ELECTRONIC SANDING LINE FOR STRAIGHT AND SHAPED ELEMENTS OMEF MOD. FUTURA – USED composed as follows: - Loader - 2 upper transverse horizontal belt groups - 2 lower transverse horizontal belt groups - 1 upper longitudinal horizontal pneumatic roller group - 1 lower longitudinal horizontal pneumatic roller group Cedpfjiu Ha Hjx Agtegt - 2 right vertical transverse belt groups - 2 left vertical transverse belt groups - 1 right longitudinal pneumatic roller group - 1 left longitudinal pneumatic roller group - 2 orbital sanders - CE standards (year 2000)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Working height: 900 mm Working width: 1,350 mm Abrasive belt exchange side: left Workpiece thickness: 3 – 160 mm Frequency-controlled feed speed: 4 – 20 m/min Abrasive belt dimensions: 2,620 x 1,350 – 1,380 mm Adjustable abrasive belt blow-off device, 5-stage adjustable WRD WORKPIECE CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE CONTROL TERMINAL powerControl with powerTouch SST SOFT STARTER Cgedpfx Agsyw Ndmetst Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM After activating the program, the machine automatically adjusts to 10 mm workpiece thickness and the blow-off rotors are activated. After complete cleaning of the feed belt, the machine returns to the initial setting. AAT EXTRACTION SLIDE VALVE CONTROL Control of extraction slide valves via the terminal (24 Volt DC, slide valves not included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PC Emergency power supply for the abrasive belt oscillation in case of power failure Configuration consists of: SANDTEQ W-700, PROFI SWB735/RRE – bottom sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. The machine is prepared to accommodate up to two auxiliary units, such as cleaning brushes, finishing or structuring brushes, and rotating cleaning nozzles. Units: I. R-UNIT Sanding unit with automatically adjustable contact roller, profiled steel roller, 240 mm diameter, with grit compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation II. R-UNIT Sanding unit with automatically adjustable contact roller, rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grit compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E-UNIT Sanding unit prepared for a pressure beam - Automatic locking of the sanding units for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation - Protected storage on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing workpiece edge - Various sanding inserts, 80 mm wide with different felt hardness grades Machine dimensions L x W x H: 3,900 x 2,100 x 2,000 mm Machine weight approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, with the addition of: FBM FINISHING BRUSH Brush unit with finishing brush Brush material: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions L x W x H: 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight approx. 6,500 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1998, COSTA LEVIGATRICI 757 CC CC 350, 2 spodnja valja + 2 zgornja valja Cgsdor I Atdspfx Agtjt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 14.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3294, vrsta vhodnega toka: trifazni, moč: 90 kW (122,37 KM), vhodna napetost: 400 V, Prodajamo linijo za pelete proizvajalca Nova pellet, letnik 2019 in prva uporaba v letu 2020. - Stiskalnica za pelete N-MIDI 90 kW, 14.000 ur (zelo dobro in redno vzdrževana, 2026 novi valji in matrica) – leto 2019 - Transportni vertikalni dvigalo, višina približno 10 m – leto 2019 - Hladilni stolp N-CO700 – leto 2019 Codpfewahhcjx Agtogt - Krmilna omara – NOVA, NERABLJENA Za doplačilo prodamo tudi robustni kladivni mlin Miller M16 (električni motor 37 kW) – NOV, NERABLJEN – 25.000 € neto. Prodajamo samo zgoraj naštete predmete (brez ciklona, filtrov itd.)! Linija je v zelo dobrem stanju in je bila redno strokovno vzdrževana. Za dodatne informacije pišite ali pokličite na naše kontakte.

Stanje: novo, Condition: New Delivery time: approx. 6 months from order Country of origin: Taiwan Price: €195,350 Leasing rate: €3,692.12 Grinding length: 2,000 mm Distance spindle to table: 730 mm Table size: 2,000 x 600 mm Electromagnetic chuck: 2x 1,000 x 600 mm Table movement, hydraulic: 2,100 mm Table speed: 5 – 30 m/min Cross feed: 0 – 2,250 mm/min Incremental cross feed: mm Max. cross travel: 685 mm Vertical feed: 0 – 675 mm/min Incremental vertical feed: 0.001 – 0.04 mm Max. vertical travel: 560 mm Spindle speed: 500 – 2,200 rpm Spindle motor: 11 kW Hydraulic motor: 5.5 kW Length: 6,225 mm Width: 2,707 mm Height: 2,305 mm Transport dimensions: 6,530 × 2,700 × 3,350 mm (gross) Weight: 10,200 kg Max. table load: 1,600 kg Max. workpiece weight on electromagnetic chuck: 1,150 kg Max. workpiece weight on clamping table: 1,600 kg Grinding wheel dimensions: 405 x 75 x 127 mm Servo feed motors Y/Z axis: 3.1 kW each 10.4" iSurface graphic CNC control on swivel arm with touchscreen for: - Operating mode selection - Cycle selection and program creation - Surface grinding - Cross grinding - Plunge grinding - Dressing with automatic compensation - Semi-automatic balancing in machine - Automatic spindle speed for constant surface speed - Spindle load visualization Cgjdsxpizmjpfx Agtst - Imbalance control - Graphical status display - Alarm list Max. table speed: 30 m/min Integrated machine body temperature control Turcite-coated double-V guideways Hydraulic table drive with cooling Linear guides with recirculating ball screws and AC motors for precise X- and Z-axis positioning Automatic lubrication system with pressure switch for automatic stop in case of pressure drop Electromagnetic chuck: 2x 1,000 x 600 mm Coolant system with automatic paper filter and magnetic separator (500 ltr) Automatic dressing unit mounted on table, without diamond, with automatic compensation Grinding wheel flange with 1 grinding wheel Grinding wheel balancing scale LED machine lamp Machine and equipment compliant with CE regulations Operating manual in GERMAN or ENGLISH OPTIONS (PRICES ON REQUEST): - Full enclosure of work area - Oil mist extraction

Stanje: novo, Condition: new Delivery time: approx. 6 months from order placement Country of origin: Taiwan Price: €156,560 Leasing rate: €2,958.98 Grinding length: 1200 mm Distance spindle – table: 850 mm Table dimensions: 1200 x 500 mm Grinding area: 1200 mm Magnetic chuck: 1200 x 500 mm Table speed: 5 – 30 m/min Cross feed: 0 – 5000 mm/min Cross feed incremental: 0.001 mm Max. cross feed: 560 mm Vertical feed: 0 – 2000 mm/min Vertical feed incremental: 0.001 mm Spindle speed: 500 – 2200 rpm Spindle motor: 11 kW Hydraulic motor: 3.7 kW Cross feed motor: 3.1 kW Grinding wheel feed drive: 2.4 kW Length: 4600 mm Width: 2950 mm Height: 2745 mm Transport dimensions: 4610 x 2290 x 2500 mm Weight: 6,400 kg Table height: 900 mm Max. workpiece weight on magnetic chuck: 930 kg Max. workpiece weight on clamping table: 1,250 kg Grinding wheel dimensions: 405 x 50 x 127 mm Smart i control with 10.4" touchscreen on pivoting panel, with electronic wired handwheel - RS232, USB I/O interface - SMART Grind Cam (dxf transfer to C-Code) - PC-based control with graphic conversational programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-slot grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, Class 7) Spindle with air overpressure system to prevent dust ingress Longitudinal guides with double V-design, Turcite-B coated Cross and vertical feeds with precision ball screws (Class C2) and servo motors Longitudinal feed hydraulic Linear scale for Y-axis, 675 mm The X-axis guides are equipped with a circulating lubrication pump, ensuring adequate oil supply and efficient lubrication Fully enclosed housing with lighting Electro-magnetic chuck 1200 x 500 mm Coolant system with automatic paper filter and magnetic separator Automatic dresser mounted on table with automatic compensation* Grinding wheel Grinding wheel flange Cedpfswiryzox Agtsgt Grinding wheel balancing device Cooling unit for control cabinet Machine and equipment in accordance with CE regulations Operating instructions in GERMAN or ENGLISH PRICE FOB TAIWAN * The exact configuration of the dressing unit must be clarified prior to order.

Stanje: novo, Condition: new Delivery time: approx. 6 months from order placement Codpfx Aewirh Segtegt Country of origin: Taiwan Price: €48,720 Leasing rate: €930.55 Grinding length: 610 mm Distance spindle to table: 600 mm Table size: 610 x 305 mm Magnetic chuck: 300 x 600 mm Table movement, hydraulic: 650 mm Table movement, manual: 700 mm Table speed: 5 - 25 m/min Cross feed: 1,100 mm/min Incremental cross feed: 1 - 12 mm Max. cross feed: 370 mm Hydraulic motor: 1.5 kW Cross feed motor: 0.004 kW Feed drive grinding wheel: 0.19 kW Total connected load: 7.4 kW Length: 2670 mm Width: 1810 mm Height: 2050 mm Weight: 2100 kg Grinding wheel dimensions: 355 x 50 x 127 mm Spindle speed: 1,450 rpm Spindle drive: 3.7 kW Cross feed per handwheel revolution: 4 mm Cross feed handwheel graduation: 0.02 mm Fine feed per revolution: 0.2 mm Fine feed per division: 0.002 mm Operator panel on swivel arm automatic vertical feed hardened guideways in all 3 axes with needle bearings grinding wheel spindle mounted on 4 high-precision angular contact ball bearings electro-magnetic chuck coolant device with automatic paper filter and magnetic separator manual dressing device with diamond Grinding wheel Grinding wheel flange Grinding wheel balancing stand Balancing arbor LED machine lamp Machine and equipment comply with CE regulations Operating manuals in GERMAN and ENGLISH

Stanje: novo, Condition: new Delivery time: approx. 6 months from order Country of origin: Taiwan Price: €73,460 Leasing rate: €1,388.39 Grinding length: 610 mm Distance spindle - table: 600 mm Table: 600 x 300 mm Electromagnetic chuck: 600 x 300 mm Max. workpiece weight: 420 kg Table movement, hydraulic: 700 mm Table speed: 5 - 25 m/min Cross feed: 0 - 2,250 mm/min Incremental cross feed: mm Max. cross travel: 350 mm Automatic vertical feed: 440 mm Vertical feed: 0 - 675 mm/min Incremental vertical feed: 0.001 - 0.04 mm Spindle speed: 500 - 2,000 rpm Spindle motor: 5.5 kW Hydraulic motor: 0.75 kW Cross feed motor: 1.1 kW Feed drive grinding wheel: 1.1 kW Length: 2,710 mm Cgsdpewirc Nefx Agtet Width: 2,428 mm Height: 2,200 mm Weight: 3,500 kg Table height: 975 mm Grinding wheel dimensions: 355 x 50 x 127 mm 10.4" graphic NC control on swivel arm with touchscreen for: - Selection of operating mode, program creation, graphical status monitoring, alarm list automatic vertical feed Fully enclosed working area Servo drive for grinding wheel infeed and table cross movement Hardened guideways on all 3 axes with needle bearings Electro-magnetic chuck Coolant system with automatic paper filter and magnetic separator Automatic dressing device mounted on table, without diamond, with automatic compensation * Grinding wheel Grinding wheel flange Wheel balancing stand Balancing arbor LED machine lamp Machine and equipment in compliance with CE regulations Operating instructions in GERMAN and ENGLISH * The exact configuration of the dressing device must be clarified before ordering (Example photo)

Stanje: novo, Leto izdelave: 2026, Condition: New Year of manufacture: 2026 Stock number: 050163 Delivery time: May 2026, subject to prior sale Country of origin: Taiwan Price: €86,130 Leasing rate: €1,627.86 Grinding length: 1,015 mm Distance spindle to table: 600 mm Table size: 1,000 x 400 mm Magnetic chuck: 1,000 x 400 mm Max. workpiece weight: 670 kg Csdpfowircijx Agtjgt Table movement (hydraulic): 1,100 mm Table speed: 5 - 25 m/min Cross feed: 0 - 2,250 mm/min Incremental cross feed: mm Max. cross feed: 450 mm Automatic vertical feed: 440 mm Vertical feed: 0 - 675 mm/min Incremental vertical feed: 0.001 - 0.04 mm Spindle speed: 500 - 2,000 rpm Spindle motor: 5.5 kW Hydraulic motor: 1.5 kW Cross feed motor: 1.1 kW Grinding wheel feed drive: 1.1 kW Length: 3,630 mm Width: 2,682 mm Height: 2,200 mm Transport dimensions: 4,400 x 2,300 x 2,400 mm Weight: 4,800 kg Max. workpiece weight on magnetic chuck: 423 kg Max. workpiece weight on clamping table: 670 kg Grinding wheel dimensions: 355 x 50 x 127 mm 10.4” graphic NC control system on swivel arm with touchscreen for: - Mode selection, program creation, graphical status monitoring, alarm list automatic vertical feed complete work area enclosure servo drive for grinding wheel infeed and table cross adjustment hardened guideways in all 3 axes with needle bearings electro-magnetic chuck coolant system with automatic paper filter and magnetic separator oil mist extraction system automatic dressing device mounted on table, without diamond, with automatic compensation grinding wheel grinding wheel flange grinding wheel balancing stand balancing arbor LED machine light Machine and equipment conform to CE standards Operating manual in GERMAN and ENGLISH

Stanje: novo, Condition: new Delivery time: approx. 6 months from order confirmation Country of origin: Taiwan Price: €119,350 Leasing rate: €2,255.72 Grinding length: 610 mm Distance spindle - table: 600 mm Table: 600 x 300 mm Magnetic chuck: 600 x 300 mm Table speed: 0 - 20 m/min Cross feed: 0 - 3,000 mm/min Cross feed incremental: 0.001 mm Max. cross feed: 350 mm Automatic vertical feed: 440 mm Vertical feed: 0 - 3,000 mm/min Vertical feed incremental: 0.001 mm Spindle speed: 500 - 1,800 rpm Csdpfswirb Sox Agtegt Spindle motor: 11 kW Length: 3,160 mm Width: 2,450 mm Height: 2,080 mm Transport dimensions: 3,400 x 2,200 x 2,530 mm Weight: 4,000 kg Table height: 975 mm Max. workpiece weight on magnetic chuck: 195 kg Max. workpiece weight clamped on table: 370 kg Grinding wheel dimensions: 355 x 50 x 127 mm Servo feed motors Y/Z: 1.1 / 1.1 kW Servo feed motor X: 3.9 kW Positioning accuracy: 0.005 mm Repeatability: 0.003 mm Smart i control with 10.4" touchscreen on swiveling panel, with electronic handwheel (wired) - RS232, USB I/O interface - SMART Grind Cam (dxf transfer to C-code) - PC-based control with graphical dialog programming or G-code programming Continuously variable speed Surface, traverse, plunge, multiple groove, contour, and dressing grinding cycles Spindle with 4 angular contact ball bearings (P4, Class 7) Longitudinal and cross guides with needle bearings for very low friction, higher accuracy, and low maintenance All 3 axes with precision ball screws (Class C2) and AC servo motors Full enclosure with lighting Electro-magnetic chuck Coolant system 120 l with automatic paper filter and magnetic separator Automatic dressing unit mounted on table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing stand Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH Accuracy standard ISO 1986-1 * The exact configuration of the dressing unit must be clarified before an order is placed.

Stanje: novo, Condition: new Delivery time: approx. 6 months from order Country of origin: Taiwan Price: €123,650 Leasing rate: €2,336.99 Grinding length: 1,015 mm Distance spindle - table: 600 mm Table: 1,000 x 400 mm Magnetic chuck: 1,000 x 400 mm Table movement (hydraulic): 1,100 mm Table speed: 5 - 25 m/min Cross feed: 0 - 3,000 mm/min Cross feed (incremental): 0.001 mm Max. cross feed: 450 mm Automatic vertical feed: 440 mm Vertical feed: 0 - 3,000 mm/min Vertical feed (incremental): 0.001 mm Spindle speed: 500 - 1,800 1/min Spindle motor: 11 kW Hydraulic motor: 2.2 kW Cross feed motor: 1.1 kW Grinding wheel feed drive: 1.1 kW Length: 4,450 mm Width: 2,655 mm Height: 2,080 mm Weight: 4,200 kg Max. workpiece weight on magnetic chuck: 250 kg Max. workpiece weight on clamping table: 470 kg Grinding wheel dimensions: 355 x 50 x 127 mm Positioning accuracy: 0.005 mm Repeatability: 0.003 mm Smart i Control with 10.4" touchscreen on swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer to C-code) - PC-based control with graphical dialogue programming or G-code programming Stepless variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple slot grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal guides with double-V design, with Turcite-B coating Csdowiq Taspfx Agtsgt Cross and vertical feeds with precision ball screws (Class C2) and AC servo motors Longitudinal feed hydraulic Full enclosure with lighting Electromagnetic chuck Coolant system with automatic paper filter and magnetic separator Automatic dressing unit mounted on table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing gauge Machine and equipment according to CE regulations Operating manual in GERMAN or ENGLISH * The exact configuration of the dressing unit must be clarified prior to ordering.

Stanje: novo, Condition: New Delivery time: approx. 6 months from order Country of origin: Taiwan Price: €108,950 Leasing rate: €2,059.16 Grinding length: 610 mm Distance spindle - table: 600 mm Table: 600 x 300 mm Magnetic clamping plate: 600 x 300 mm Table speed: 5 - 25 m/min Cross feed: 0 - 3,000 mm/min Cross feed incremental: 0.001 mm Max. cross feed: 350 mm Automatic vertical feed: 440 mm Vertical feed: 0 - 3,000 mm/min Vertical feed incremental: 0.001 mm Spindle speed: 500 - 1,800 rpm Spindle motor: 11 kW Hydraulic motor: 2.2 kW Length: 4,020 mm Width: 2,450 mm Height: 2,080 mm Transport dimensions: 3,400 x 2,220 x 2,530 mm Weight: 3,700 kg Table height: 975 mm Max. workpiece weight on magnetic table: 195 kg Max. workpiece weight on clamping table: 370 kg Grinding wheel dimensions: 355 x 50 x 127 mm Servo feed motors Y/Z: 1.1 / 1.1 kW Positioning accuracy: 0.005 mm Repeat accuracy: 0.005 mm Smart i control with 10.4'' touchscreen on swiveling panel with electronic cable-connected handwheel - RS232, USB I/O interface - SMART Grind Cam (dxf transfer to C-Code) - PC-based control with graphical dialog programming or G-Code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, Class 7) Longitudinal and cross guides with needle bearings for very low friction, higher accuracy and reduced maintenance costs Cross and vertical feed with precision ball screws (Class C2) and AC servomotors Longitudinal feed hydraulic Full enclosure with lighting Electro-magnetic clamping plate Coolant unit 120 l with automatic paper filter and magnetic separator Automatic dressing unit mounted on table, with automatic compensation * Grinding wheel Cgodpfx Agswiq H Tjtst Grinding wheel flange Grinding wheel balancing arbor Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH Accuracy standard: ISO 1986-1 * The precise configuration of the dressing unit must be clarified prior to order

Stanje: novo, Condition: New Delivery time: approx. 6 months from order placement Country of origin: Taiwan Price: €118,700 Leasing rate: €2,243.43 Grinding length: 1,200 mm Distance spindle - table: 730 mm Table size: 1,200 x 500 mm Electromagnetic chuck: 1,200 x 500 mm Max. table speed: 30 m/min Hydraulic motor: 3.7 kW Total connected load: 27 kVA/kW Length: 4,600 mm Width: 3,040 mm Height: 2,200 mm Weight: 6,400 kg Table height: 990 mm Max. workpiece weight on electromagnetic chuck: 930 kg Max. workpiece weight on clamping table: 1,250 kg Cgjdpfxjwiq Hmj Agtjt Grinding wheel dimensions: 405 x 50 x 127 mm Min. input: 0.001 mm Spindle speed: 500 – 2,000 rpm Spindle drive: 11 kW 10.4" iSurface graphic NC control on swiveling arm with touchscreen for: - Operating mode selection - Cycle selection and program creation - Surface grinding - Cross grinding - Plunge grinding - Dressing with automatic compensation - Semi-automatic balancing in machine - Automatic spindle speed for constant surface speed - Spindle load visualization - Imbalance control - Graphical condition monitoring - Alarm list Max. table speed: 30 m/min Vertical feed by servo motor and ballscrew Cross feed by servo motor and ballscrew Double V-guideway (Turcite-B) for table longitudinal movement Grinding spindle on 6 high-precision angular contact ball bearings Electromagnetic chuck Coolant system with automatic paper filter and magnetic separator Automatic dressing unit mounted on table, without diamond, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing device Balancing arbor LED machine light Machine and equipment in accordance with CE regulations Operating manual in GERMAN and ENGLISH * The exact configuration of the dressing unit must be clarified prior to order placement.

Stanje: novo, Condition: new Delivery time: approx. 6 months from order Country of origin: Taiwan Price: €232,570 Grinding length: 1700 mm Distance spindle to table: 850 mm Table: 1600 x 600 mm Magnetic chuck: 2x 800 x 600 mm Table speed: 0 - 20 m/min Cross feed: 0 - 5000 mm/min Incremental cross feed: 0.001 mm Max. cross travel: 685 mm Vertical feed: 0 - 2000 mm/min Incremental vertical feed: 0.001 mm Max. vertical travel: 675 mm Spindle speed: 500 - 2200 rpm Spindle motor: 11 kW Length: 6165 mm Width: 3320 mm Cgodpfxowiq Eio Agtet Height: 2850 mm Transport dimensions: 5730 x 3200 x 3350 mm gross Weight: 9500 kg Table height: 900 mm Max. workpiece weight on magnetic chuck: 1335 kg Max. workpiece weight on clamping table: 1850 kg Grinding wheel dimensions: 405 x 50 x 127 mm Servo feed motors Y/Z: 3.1 / 3.1 kW Servo feed motor X: 7.5 kW Positioning accuracy X: 0.008 mm, Y/Z: 0.005 mm Repeatability X: 0.006 mm, Y/Z: 0.003 mm Smart i Control with 10.4" touchscreen on swivel panel, with electronic wired handwheel - RS232, USB I/O interface - SMART Grind Cam (DXF transfer to C-code) - PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, class 7) Longitudinal guideways with double V-form and Turcite-B coating All 3 axes with precision ball screws (class C2) and AC servo motors Fully enclosed with lighting Electromagnetic chuck Coolant system 250 l with automatic paper filter and magnetic separator Automatic wheel dresser mounted on table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing stand Machine and equipment compliant with CE regulations Operation manual in GERMAN or ENGLISH Accuracy standard ISO 1986-1 * The exact configuration of the dressing unit must still be clarified before placing an order

Stanje: novo, Condition: New Delivery time: approx. 6 months from receipt of order Country of origin: Taiwan Price: €247,540 Grinding length: 2,100 mm Distance spindle to table: 850 mm Table: 2,000 x 600 mm Magnetic chuck: 2x 1,000 x 600 mm Table speed: 0 - 20 m/min Cross feed: 0 - 5,000 mm/min Cross feed incremental: 0.001 mm Max. cross feed: 685 mm Vertical feed: 0 - 2,000 mm/min Vertical feed incremental: 0.001 mm Max. vertical feed: 675 mm Spindle speed: 500 - 2,200 rpm Spindle motor: 11 kW Length: 7,710 mm Width: 3,320 mm Height: 2,850 mm Transport dimensions: 6,530 x 3,200 x 3,350 mm gross Weight: 10,200 kg Table height: 900 mm Max. workpiece weight on magnetic chuck: 1,240 kg Max. workpiece weight on clamping table: 2,000 kg Grinding wheel dimensions: 405 x 50 x 127 mm Servo feed motors Y/Z: 3.1 / 3.1 kW Servo feed motor X: 7.5 kW Positioning accuracy X: 0.008 mm, Y/Z: 0.005 mm Repeatability X: 0.006 mm, Y/Z: 0.003 mm Smart i control with 10.4" touchscreen on swiveling panel, with electronic cable-connected handwheel - RS232, USB I/O interface - SMART Grind Cam (DXF transfer to C-code) - PC-based control with graphical dialogue programming or G-code programming Infinitely variable spindle speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, class 7) Longitudinal guides in double V-shape with Turcite-B coating All 3 axes equipped with precision ball screws (Class C2) and AC servomotors Full enclosure with lighting Electromagnetic chuck Coolant system 250 L with automatic paper filter and magnetic separator Automatic dressing device mounted on the table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing gauge Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH Accuracy standard ISO 1986-1 Csdpfxswiq Eco Agtjgt * The exact configuration of the dressing device must be clarified before placing an order

Stanje: novo, Leto izdelave: 2026, Condition: new Year of manufacture: 2026 Stock number: 050162 Delivery time: May 2026, subject to prior sale Country of origin: Taiwan Price: €69,400 Leasing rate: €1,311.66 Grinding length: 800 mm Distance spindle – table: 610 mm Table size: 800 x 400 mm Magnetic chuck: 800 x 400 mm Table movement, hydraulic: 810 mm Table speed: 5 – 25 m/min Hydraulic motor: 0.74 kW Total connected load: 10 kVA Length: 3540 mm Width: 2080 mm Height: 2100 mm Weight: 2,900 kg Table height: 980 mm Max. table load: 350 kg Grinding wheel dimensions: 355 x 50 x 127 mm Min. input: 0.001 mm Spindle speed: 500 – 1,800 rpm Spindle drive: 3.75 kW Servo feed motors Y/Z: 1.1 kW 10.4" iSurface graphical NC control on swiveling arm with touchscreen for: - Operating mode selection - Cycle selection and program creation - Surface grinding - Cross grinding Cedpfowiqytox Agtegt - Plunge grinding - Dressing with automatic compensation - Semi-automatic balancing within the machine - Automatic spindle speed for constant surface speed - Spindle load visualization - Unbalance control - Graphical condition monitoring - Alarm list - Automatic vertical feed - Servo drive for grinding wheel feed and table cross movement Hardened guideways on all 3 axes with needle bearings Electromagnetic chuck Coolant system with automatic paper filter and magnetic separator Automatic dressing device above the grinding wheel, with automatic compensation Grinding wheel Grinding wheel flange Grinding wheel balancing scale LED machine lamp Machine and equipment in accordance with CE regulations Operating instructions in GERMAN and ENGLISH

Stanje: novo, Leto izdelave: 2024, Condition new Year of manufacture 2024 Stock number 5549 Delivery time immediate, subject to prior sale Country of origin Taiwan Price €63,310 Leasing rate €1,196.56 Bestseller 1 In stock 1 Grinding length 610 mm Distance spindle - table 610 mm Table 600 x 300 mm Magnetic chuck 300 x 600 mm Table travel hydraulic 650 mm Table travel manual 700 mm Table speed 5 - 25 m/min Cross feed 0 - 2,250 mm/min Cross feed incremental 3 - 32 (0.001) mm Max. cross feed 320 mm Spindle motor 5.5 kW Hydraulic motor 0.74 kW Cross feed motor 1 kW Wheel feed drive 1 kW Length 2,950 mm Width 1,490 mm Height 2,080 mm Weight 2,200 kg Grinding wheel dimensions 355 x 50 x 127 mm Spindle speed 1,450 rpm Fine feed per division 0.001 mm 10.4" iSurface graphic NC control on swing arm with touchscreen for: Operating mode selection Cycle selection and program creation - Surface grinding - Cross grinding - Plunge grinding - Dressing with automatic compensation - Semi-automatic in-machine balancing Automatic spindle speed for constant surface speed Spindle load visualization Unbalance monitoring Graphic condition monitoring Alarm list Automatic vertical feed Servo drive for wheel infeed and table cross adjustment Hardened guideways in all 3 axes with needle bearings Electromagnetic chuck Coolant system with automatic paper filter and magnetic separator Automatic dressing device above grinding wheel, with compensation Grinding wheel Codpfx Agowiqymotegt Grinding wheel flange Grinding wheel balancing scale Balancing arbor LED machine light Machine and equipment according to CE regulations Operating instructions in GERMAN and ENGLISH OPTION: Additional grinding wheel flange €200,--

Stanje: novo, Condition: new Delivery time: approx. 6 months from order Country of origin: Taiwan Price: €76,220 Leasing rate: €1,440.56 Grinding length: 1,015 mm Distance spindle - table: 610 mm Table: 1,000 x 400 mm Magnetic chuck: 400 x 1,000 mm Table movement (hydraulic): 1,050 mm Table speed: 5 - 25 m/min Cross feed: 0 - 2,250 mm/min Incremental cross feed: mm (info not specified) Cgodpfxewiqyas Agtot Max. cross travel: 450 mm Automatic vertical feed: 480 mm Vertical feed: 0 - 675 mm/min Incremental vertical feed: 0.001 - 0.04 mm Spindle speed: 500 - 1,800 rpm Spindle motor: 3.75 kW Hydraulic motor: 1.5 kW Cross feed motor: 1.1 kW Grinding wheel feed drive: 1.1 kW Length: 4,280 mm Width: 2,080 mm Height: 2,100 mm Weight: 3,500 kg Max. workpiece weight on magnetic chuck: 220 kg Max. workpiece weight on clamping table: 440 kg Grinding wheel dimensions: 355 x 50 x 127 mm Fine feed per graduation: mm (info not specified) 10.4'' iSurface graphic NC control on swing arm with touchscreen for: - Operation mode selection - Cycle selection and program creation - Surface grinding - Cross grinding - Plunge grinding - Dressing with automatic compensation - Semi-automatic balancing in machine - Automatic spindle speed for constant surface speed - Spindle load visualization - Imbalance control - Graphical status monitoring - Alarm list - Automatic vertical feed - Servo drive for grinding wheel infeed and table cross adjustment - Hardened guideways in all 3 axes with needle bearings - Electro-magnetic chuck - Coolant system with automatic paper filter and magnetic separator - Automatic table-mounted dressing device (without diamond, with automatic compensation)* - Grinding wheel - Grinding wheel flange - Grinding wheel balancing scale - Balancing arbor - LED machine lamp - Machine and equipment in accordance with CE regulations - Operating instructions in GERMAN and ENGLISH *Exact configuration of the dressing device must be clarified before ordering

Stanje: novo, Condition: new Delivery time: approx. 6 months from order placement Country of origin: Taiwan Price: €76,550 Leasing rate: €1,446.80 Grinding length: 460 mm Distance spindle to table: 445 mm Table: 460 x 200 mm Magnetic chuck: 450 x 200 mm Table speed: 0.1 – 25 m/min Cross feed: 0 – 3,000 mm/min Cross feed incremental: 0.001 mm Max. cross feed: 220 mm Automatic vertical feed: 340 mm Vertical feed: 0 – 3,000 mm/min Vertical feed incremental: 0.001 mm Spindle speed: 1,000 – 7,000 rpm Spindle motor: 3 kW Hydraulic motor: 0.7 kW Cross feed motor: 1.1 kW Grinding wheel feed drive: 1.1 kW Length: 2,510 mm Width: 2,515 mm Height: 2,010 mm Weight: 1,550 kg Table height: 1,015 mm Max. workpiece weight on magnetic chuck: 175 kg Max. workpiece weight on clamping table: 210 kg Grinding wheel dimensions: Ø205 x 12.7 x 31.75 mm Positioning accuracy: 0.004 mm Repeatability: 0.003 mm Smart i control system with 10.4" touchscreen on swiveling panel, with electronic wired handwheel - RS232, USB I/O interface - SMART Grind Cam (DXF transfer into C-code) - PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal guides with double V form, with Turcite-B coating Cross and vertical feed with precision ball screws (class C2) and AC servo motors Longitudinal feed hydraulic Fully enclosed with lighting Electromagnetic chuck Coolant system with automatic paper filter and magnetic separator Automatic dressing device mounted on table, without diamond, with automatic compensation * Grinding wheel Cgodpfjwiqvbjx Agtst Grinding wheel flange Grinding wheel balancing device Machine and equipment according to CE regulations Operating manual in GERMAN or ENGLISH * The exact configuration of the dressing device must be clarified before ordering.

Stanje: novo, Condition: New Delivery time: approx. 6 months from order Price: €162,050 Leasing rate: €3,062.75 Grinding length: 1200 mm Distance spindle - table: 730 mm Table size: 1200 x 600 mm Electromagnetic chuck: 1200 x 600 mm Table movement (hydraulic): 1300 mm Table speed: 5 - 30 m/min Cross feed: 0-2250 mm/min Incremental cross feed: 0.001-32 mm Max. cross feed: 685 mm Automatic vertical feed: 560 mm Vertical feed rate: 0-675 mm/min Spindle speed: 500-2200 rpm Spindle motor: 11 kW Hydraulic motor: 5.5 kW Cross feed motor: 3.1 kW Grinding wheel feed drive: 3.1 kW Length: 4790 mm Width: 3207 mm Height: 2305 mm Weight: 8100 kg Max. workpiece weight on magnetic chuck: 1150 kg Max. workpiece weight on clamping table: 1600 kg Grinding wheel dimensions: 405 x 75 x 127 mm Min. Input: 0.0001 mm 10.4" iSurface Graphic NC control on swivel arm with touchscreen for: - Selection of operating mode - Cycle selection and program creation - Surface grinding - Cross grinding - Plunge grinding - Dressing with automatic compensation - Semi-automatic balancing in the machine - Automatic spindle speed for constant surface speed - Spindle load visualization - Imbalance control - Graphical status monitoring Cgedpewiqq Eofx Agtjt - Alarm list Max. table speed: 30 m/min Integrated machine body temperature control Turcite-coated double V-guides Hydraulic table drive with cooling Linear guides with recirculating ball screws and AC motors for precise positioning in X and Z axes Automatic lubrication with pressure switch for automatic stop in case of pressure drop Electro-magnetic chuck 1200 x 600 mm Coolant device with automatic paper filter and magnetic separator Automatic dressing unit mounted on the table, without diamond, with automatic compensation * Grinding wheel flange with 1 grinding wheel Grinding wheel balancing scale LED machine lamp Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH * The exact configuration of the dressing unit must be clarified prior to ordering OPTION (PRICE ON REQUEST): - Complete enclosure of the working area

Stanje: novo, Condition: new Delivery time: approx. 2 - 4 weeks from order Country of origin: Germany Price: €1,896.69 Grinding wheel dimensions: 200 x 32 x 32 mm Motor: 1 kW Speed: 2550 rpm Connection for extraction: 42 mm diameter Length: 270 mm Width: 470 mm Height: 1050 mm Transport dimensions: 600 x 800 x 1350 mm Weight: 60 kg Smooth-running, maintenance-free motor Side-closed protective hoods Stable, adjustable workpiece supports High safety standard due to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Cjdpfxjy Ig N Io Agtogt Connection cable with 16 A CEE plug 1 coarse and 1 fine grinding wheel included 12-month warranty for single-shift operation Article no.: 317.774 with machine stand, emergency stop mushroom switch, and brake OPTION (price on request): Foot switch as emergency stop ALTERNATIVE VERSIONS: Article no.: 317.762 bench model Article no.: 317.777 with integrated MA400D extraction, machine stand, emergency stop mushroom switch, and brake

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 30.000 h, številka stroja/vozila: LC566, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and production capacity The used CFT can filling line for soft drinks – 12,000 cans per hour offers a complete solution for filling carbonated beverages into aluminum cans. CFT manufactured this line in 2017 and designed it for two slim formats commonly used in the soft drinks industry. Specifically, the system handles up to 12,000 cans per hour, thus meeting the production needs of medium-sized businesses. From 30.06.2025, the owner will make the line available for sale. Therefore, this offer represents a valuable opportunity for companies looking to expand their production capacity. Depalletizing and initial inspection First, the CFT depalletizer automatically separates the empty cans and introduces them into the production flow. Next, a HEUFT inspection unit checks each can for visible defects and dimensional deviations. As a result, the system ensures that only clean, undamaged cans proceed to rinsing. Furthermore, this early inspection step reduces the risk of plant downtime further along the process. Cgsdpsy I R Eajfx Agtot Can transport and rinsing Afterwards, CFT cable conveyors transport the accepted cans to a twin-channel rinser. The CFT rinser cleans the inside of each can using pressurized water jets or a sterile air blast. Consequently, the machine meets hygiene requirements as per food and beverage regulations. In addition, the twin-channel design enhances throughput and reduces contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling Following rinsing, a CFT monoblock performs the filling and seaming operations with 12 filling valves and 4 seaming heads. The machine efficiently processes cans of 150 ml and 330 ml. It also precisely controls pressure and temperature to prevent CO₂ loss during the filling of carbonated soft drinks. Moreover, this phase supports both performance and product integrity, thus ensuring consistent quality at high speeds. Inspection of filled cans and rejection After filling, another HEUFT unit inspects the filled cans to check fill level, seam integrity, and absence of leaks. If non-conforming cans are detected, an automated HEUFT reject module removes them from the conveyor. This protects the quality of downstream processes. Additionally, this step prevents unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveying and packaging Subsequently, CFT conveyors transport the approved cans to an SMI shrink wrapper. The packer forms bundles in multiple formats: 4×3 (12 cans), 6×4 (24 cans), and 2×2×3 (12 cans). This offers flexible configuration to support different packaging and distribution strategies. Alongside improved logistics, this packaging variety enables quick product changeovers. Accordingly, the line adapts well to diverse market demands. Mixing, carbonating, and labelling Before filling, a CFT mixer/carbonator prepares the product by adjusting the syrup-to-water ratio and saturating the liquid with CO₂...

Stanje: rabljeno, Leto izdelave: 1987, Naprava za dovod traku za pločevinaste kolute z integrirano ravnalno in podajalno enoto. Cjdsyyn Dqspfx Agtegt Proizvajalec: Müller Weingarten Model: UWR 80.4 Leto izdelave: 1987 Širina traku: 60 – 700 mm Debelina pločevine: 0,5 – 4 mm Dolžina podajanja: 0 – 700 mm brezstopenjsko nastavljiva

Stanje: rabljeno, Leto izdelave: 1988, Naprava za podajanje traku za kolute pločevine z odvijalnikom in integrirano podajalno enoto. Proizvajalec: H. Schleicher GmbH & Co. Tip: RMS 8-70/160-650 Tip: HE-200-900 Spz Letnik: 1988 Širina traku: 100 – 600 mm Debelina traku: 0,5 – 3 mm Maks. obremenitev: 11 t Napetost: 24 / 380 V Frekvenca: 50 Hz Moč: 5 kW Cgsdpfx Agjyyn Icstjt

Stanje: rabljeno, Leto izdelave: 1985, Transportna linija za samodejno dovajanje pločevinastega traku v linije s prešami. Proizvajalec: Müller Weingarten AG Tip: UWR 60.4 Cgjdpfjyyclcex Agtst Leto izdelave: 1985 Širina traku: 0–600 mm Debelina pločevine: 0,5–4 mm Dolžina podajanja: brezstopenjsko nastavljiva 30–500 mm