Eaton Sefelec 506-S nakup rabljenega (83.592)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Safety tester with scanner for high voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC Pedpfx Anoxqxw Tjdogn The devices were purchased in 2023/2024 and are in excellent condition. The SEFELEC 506-S test device for electrical safety testing, a new generation EATON model, is based on ARM Dual Core technology components and controlled by a DSP. This technology provides the operator with optimal stability and repeatability of measurements. The high accuracy and test speed are tailored to the quality assurance requirements in production and incoming goods inspection. The sequencing function simplifies operation of the SEFELEC 506-S test station when integrated into a test setup or test bench. The 7” touchscreen of the new SEFELEC model series impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Withstand voltage at 5 kVAC 500 VA and 6 kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2 TΩ range PE measurement at 32 A – 8 VAC, measurement 0 ... 1 Ω Optional: Test current 50 A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming as well as displaying active tests and results Integrated ARM Dual Core Control & Nand 3D technology for optimum precision, stability, and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-034: Particular requirements for measuring insulation resistance and for test equipment for dielectric strength) Shipping is possible upon prior arrangement. #8312-2

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Safety tester for high voltage test bench - EATON Sefelec 506-S The device was acquired in 2023 and is in TOP condition. The SEFELEC 506-S electrical safety tester, a new generation EATON model, is based on ARM dual-core component technology and controlled by DSP. This technology offers the operator optimal stability and repeatability of measurements. High measurement accuracy and speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequencer function simplifies station operation when integrating the SEFELEC 506-S into a test rig or test bench. The new SEFELEC series’ 7” touchscreen impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuation (ΔI) Burn mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range Pgjdpfx Aexqxt Ijndjn PE (protective earth) test at 32A–8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp-up, hold, ramp-down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming and displaying ongoing tests and results Integrated ARM dual-core control & NAND 3D technology for optimum accuracy, stability, and repeatability Integrated DSP allows for higher test speeds Large internal memory for storage of configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical measurement, control and laboratory equipment – Part 2-034: Particular requirements for measurement equipment for insulation resistance and withstand voltage) Shipping available by arrangement. #8312-1

Stanje: skoraj kot novo (rabljeno), Različni EATON močnostni kontaktorji in releji za zaščito motorja na zalogi Podpozg Htbefx Andegn 8 kos zaščitni rele ZB32-10 / EAN št. 4015082784515 2 kosa močnostni kontaktor DILM32-10 / EAN št. 4015082772604 4 kosi močnostni kontaktor DILM25-10 / EAN št. 4015082771324 1 kos močnostni kontaktor DILM50 / EAN št. 4015082778361 1 kos močnostni kontaktor DILM40 / EAN št. 4015082777746

Stanje: novo, Eaton PowerXL DA1-34030FB-B55C / 169391 frekvenčni pretvornik SN: 66650001003, neuporabljen v odprti originalni embalaži, 100% delujoč, obseg dobave v skladu s fotografijami. Pgedpfjy Np Rdsx Andon

Stanje: novo, Eaton XN-2AI-PT/NI-2/3 input module, SN 42369-70, part no. 140067, unused in opened original packaging, 100% fully functional, scope of delivery as per photos. Pgedpfopnpl Rex Anden

Stanje: skoraj kot novo (rabljeno), Ue-200-480VAC 3F 50/60Hz, 230V 5,5kW Uc.Vs-24V AC/DC Podpfey U D N Sox Andogn Področje uporabe: Krmiljenje strojev Širina: 45 mm Višina: 150 mm Globina: 118 mm Teža: 459 g Stanje: Kot novo

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, In this offer, you are purchasing a used accessory option "Konica Minolta LS-506" Pgjdpfxov R Tu Ro Andsn Item for sale: 1 x Konica Minolta LS-506 High-Capacity Stacker: Compatible with various Minolta production systems/machines Condition: This offer is for a used device which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and Shipping: You are welcome to inspect the device during our business hours. Please arrange an appointment for this purpose! Sea-worthy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Stanje: rabljeno, Control relay, control relay extension relay output, compact controller - Manufacturer: Eaton, control relay compact controller - Model: easy 412-DC-R Pjdpfx Asltrgrjndogn - Quantity: 1x relay available - Price: per unit - Dimensions: 90/70/60 mm - Weight: 0.2 kg/unit

Stanje: rabljeno, Del primeren za: tovornjake DDV/obdavčitev razlike: DDV je odbiten Pgsdpfx Aoyrg Dlsndon Tip številka: 1406075

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 5.100 h, Liebherr L506 kolesni nakladač s hitromenjalcem in vilicami. Takoj pripravljen za uporabo. Podpfjy Rq U Hex Andsgn

Stanje: pripravljen za uporabo (rabljen), NUM FS 200504B 200 506 A 26 Power Supply Unit, used, normal signs of wear, 100% functional, scope of delivery as per photos Psdpfsi Eb U Hsx Andogn

Stanje: pripravljen za uporabo (rabljen), Heidenhain BC 120 monitor enota 15" TFT SN: 30938147, sestavljena iz dodatne tipkovnice Heidenhain 329 506-01 in industrijskega monitorja Viscotech SEM15-F-BC120-FP za TNC426, TNC430 / BC120, BC120F, rabljeno, dobro ohranjeno, 100% delujoče, dobava po slikah. Pedpfx Anjy Nqdfodogn

Stanje: novo, Leto izdelave: 2024, Stanje novo Letnik 2024 Številka zaloge 9738 Dobava takoj, prodano vmes Pgsdpfx Aowirulsndon Država izvora Turčija Cena 20.300 € Leasing rata 389,76 € Na zalogi 1 Dolžina upogibanja 1530 mm Maks. kapaciteta upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez predhodnega upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine s predhodnim upogibanjem - konstrukcijsko jeklo 4 mm Premer zgornjega valja 150 mm Moč motorja 4 kW Dolžina 3100 mm Širina 1120 mm Višina 1020 mm Teža 2100 kg 3 valji Asimetrična postavitev valjev - s pred-upogibanjem 2 gnana valja Motorizirana nastavitev stranskega in vpenjalnega valja Digitalni prikaz položaja stranskega in vpenjalnega valja Zgornji valj z možnostjo odklopa naprej Delovanje naprej/nazaj Kaljeni valji Premični upravljalni pult Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolna fotografija)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 506 h, nosilnost: 2.000 kg, dvižna višina: 750 mm, težišče tovora: 575 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.300 mm, dolžina vilic: 1.150 mm, lastna masa: 419 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION Our forklifts are technically refurbished in accordance with FEM-4.004 and the latest safety standards – ensuring maximum quality and your safety. From the chassis to the battery, including drive unit, brakes, steering, and electrics – every vehicle undergoes thorough inspection and reconditioning. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and consult on site now – we will find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Psdjy Rn Ecjpfx Andjgn Model: Low-lift Pallet Truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2019 Operating hours: 506 Lift height: 750 mm Mast type: None Free lift: No Initial lift: Yes Overall length: 1,800 mm Overall width: 730 mm Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 419 kg Load centre: 575 mm Tyres: Polyurethane Model type: EJE C20 Battery type: Gel Battery weight: 219 kg

Stanje: novo, Stanje novo Dobavni rok približno 12 tednov od naročila Država izvora Turčija Cena 33.000 € Leasing rata 630,3 € Dolžina upogibanja 2530 mm Maks. kapaciteta upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez predupogiba - konstrukcijsko jeklo 6 mm Maks. debelina pločevine s predupogibom - konstrukcijsko jeklo 4 mm Premer zgornjega valja 190 mm Moč motorja 5,5 kW Dolžina 4250 mm Širina 1200 mm Višina 1150 mm Teža 3750 kg Pgjdpfx Asynm E Isndsn 3 valji Asimetrična razporeditev valjev - s predupogibom 2 gnana valja Motoriziran pomik stranskega in vpenjalnega valja Digitalni prikaz položaja stranskega in vpenjalnega valja Zgornji valj izhodno nagibljiv naprej Možnost dela naprej/nazaj Kaljeni valji Premična upravljalna konzola Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolična slika)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 250 kN, premer vijaka: 25 mm, razmak između stupova: 270 mm, delovna prostornina: 39 cm³, injekcijska masa: 36 g, minimalna višina orodja: 200 mm, moč: 10,2 kW (13,87 KM), Leto izdelave: 2003 Zapiralna sila: 25 ton Razdalja med stebri: 270 x 270 mm Premer polža: 25 mm Volumen brizganja: 39 ccm Pgedpfexgiaqjx Anden Teža brizganja: 36 g za PS Oprema: transportni trak, odstranjevalec lijevka, izvlek jedra, Euromap Po popolnem pregledu! ZNIŽANJE CENE IZ 6.500 NA 5.500 EUR!!!

Stanje: novo, Sheet length: 2530 mm Sheet thickness: 6 mm Bending: 5 mm Total power requirement: 5.5 kW Weight approx.: 3750 kg Dimensions (LxWxH): 4250 x 1200 x 1250 mm Roll diameter: 190 mm • 3 rolls • Asymmetrical roll arrangement – with pre-bending • Top roll can be swung out to the front • Motorized right-left control • Conical rolling through rear roll tilting Pedpfxod Ab E Ue Andegn • Operation via foot pedal • Hardened rolls • Digital display (Symbol photo) For catalogue, see the following link:

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Zapiralna sila: 25 ton Razdalja med stebri: 270x270 mm Največja odprtina: 275 mm Višina orodja: 200 mm Velikost orodne plošče: 400 x 400 mm Premer polža: 18 mm Volumen vbrizga: 20 cm3 Masa brizga: 17 g Psdpfx Asvl Skgsndegn Tlak vbrizga: 2500 bar Delovne ure: 38.035 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Arburg 270 S 250-60 (2004) Zapiralna sila: 25 t Razdalja med veznimi palicami: 270 mm × 270 mm Dimenzije plošč: 400 mm × 400 mm Maks. hod odpiranja orodja: 275 mm Min. višina orodja: 198 mm Maks. dnevna odprtina: 279 mm Hod izmetalca: 95 mm Sila odpiranja orodja (maks.): 14 kN Dimenzije stroja (Š × D): 1250 mm × 3800 mm Podpjxl Tp Tofx Andegn Teža stroja: ca. 1900 kg Premer polža: 22 mm Prostornina hoda: 39 cm³ Tlak vbrizga: 1810 bar Količina vbrizga (2 črpalki): do 8,1 cm³/s Zmogljivost materiala (PS): do 22,0 kg/h Leto izdelave: 2004 Tip: hidravlični brizgalni stroj

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FN6033.., Leto izdelave: 2019, obratovalne ure: 6.887 h, nosilnost: 5.000 kg, dvižna višina: 6.000 mm, prosto dvigovanje: 1.800 mm, vrsta goriva: električni, tip droga: triplex, dolžina vilic: 1.200 mm, lastna masa: 8.127 kg, vrsta pogona: Elektro, Electric 4-wheel forklift Chassis number: FN6033.. Load centre: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Operational and fully functional Technical condition: Good Front tyre type: Solid rubber Front tyre condition: 80 - 100% Rear tyre type: Solid rubber Rear tyre condition: 80 - 100% Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: JH Battery type: PzS Battery year: 2019 Battery condition: 40 - 60% Psdpjwzdrtefx Andogn Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, heater, fully enclosed cab, White SE tyres.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-23, lastna masa: 888 kg, največja dovoljena obremenitev: 2.612 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.060 mm, širina tovornega prostora: 2.040 mm, višina nakladalnega prostora: 300 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, največja hitrost: 100 km/h, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, zavore: drugo, SARIS PL 506 204 3500 2 Heavy Duty Internal dimensions: 504cm x 204cm Side panel height: 35cm Loading platform height: 67cm Gross weight: 3500Kg Payload: 2561Kg Heavy Duty Special Equipment Braked tandem trailer Overrun brake and handbrake by AL-KO Maximum possible axle and brake sizes Low chassis Fully welded, hot-dip galvanized steel frame 4 longitudinal beams and 16 crossmembers 35cm aluminium profile drop sides with tension latches Sides foldable and removable on all sides 15mm thick, non-slip, heavy-duty phenolic plywood floor Heavy Duty jockey wheel with 500Kg load capacity 10 noise-dampening lashing rings with 800Kg tensile strength Reinforced 13" C-type tyres with steel valve M+S (Mud and Snow) tires Mesh/rope hooks on frame 13-pin plug Complete LED lighting Rear lights with reversing light, fog light, and triangular reflector Standard preparation for integrated loading ramps OPTIONAL ACCESSORIES PERMANENTLY REDUCED FROM FEBRUARY 2026 Pjdpfx Anjrk Iwvodogn - 100km/h upgrade (shock absorbers) - Spare wheel with bracket - Without drop sides (price reduction) - Foldable railing - Black Edition (powder-coated sides and rims in black) - Integrated loading ramps 2800Kg - Steel plate on floor panel - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh side extensions in various heights, also closed - Additional side boards - Flat cover with or without bows - High canvas cover, 180cm or 200cm - Winch for Heavy Duty Further accessories available on request! Plus shipping to Gera and vehicle registration documents 300 € net Images are for reference only and may show optional, extra-cost equipment. Have you not found the right trailer yet? We always have 50–100 vehicles in stock and ready for immediate pick-up. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialists in axle repairs and also for caravans. Large selection of rental trailers available. We also have a wide range of spare parts and accessories for trailers of all makes. Get advice by phone, visit our website, or come by in person.

Stanje: novo, Including large tack room / parabolic suspension / side padding / breast bar padding / 3rd brake light Technical Data: • Brand: Ifor Williams • Model: HBX 506 • Vehicle type: Horse trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/HU: 2 years from initial registration • Internal dimensions (LxWxH): 326 x 167 x 229 cm • External dimensions (LxWxH): 430 x 214 x 275 cm • Floor loading height: 38 cm • Perm. total weight: 2,600 kg • Unladen weight: 880 kg • Payload: 1,720 kg • Chassis: Low-loader (wheels positioned next to the superstructure) • Tyres: 165R13C • Suspension: KNOTT parabolic spring suspension • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Chassis with parabolic leaf spring suspension for enhanced ride comfort • XL tack room with: adjustable saddle rack, bridle holders, storage compartments • Aluminium floor • Aluminium side panels • Tie rings outside • Tie rings inside • Split chest bars with plastic protection • Central post dividing wall, swivelling front and rear, removable • Side padding on the walls and the central partition • Awning rail • Height adjustment for stall bars • Depth adjustment for stall bars • Emergency release system • Extra padding on breast and tail bars • Right-hand side entrance door, lockable • Door stay for entrance door • Single wheel arches, plastic (black) • 12mm thick loose rubber mat on the floor • Hay net rings • Kick protection on sidewalls (GRP plastic) • Doors above rear ramp with emergency release—can also remain open during travel • Manoeuvring handles • Front window / top doors openable on both sides (tilting and swivelling) incl. interior safety guard • Roof vent • Gas strut lifting mechanism on rear ramp • Ramp & door combination at rear tailgate • Step at rear tailgate • Lockable cast iron coupling • LED interior lighting • Spare wheel with mounted holder • Lighting system with reversing lights • Rear 3rd brake light • 13-pin plug Optional accessories (on request): • Shock absorbers (for 100 km/h approval) • Cover for automatic jockey wheel • Anti-sway coupling • Downrating to other total weights • Alloy wheels • Towing mirrors • Storage bar for saddle • Wear mat / scratch mat • Video surveillance system for interior • Reversing camera and much more. New vehicle with warranty and TÜV. - Financing or leasing available - Delivery possible nationwide - All prices include VAT - Vehicle registration document can be sent in advance, or transit plates (Germany) can be provided - Export plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been specialised dealers and service workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands for over 30 years. Pedpfx Aex S Ri Hendjgn - Errors, omissions and prior sale excepted -

Stanje: novo, Including large tack room / parabolic suspension / side padding / breast bar padding / 3rd brake light Technical Specifications: • Brand: Ifor Williams • Model: HBX 506 • Vehicle type: Horse trailer • Vehicle condition: New vehicle • Initial registration: Without initial registration • Roadworthiness/General inspection (TÜV/HU): 2 years from first registration • Interior dimensions (LxWxH): 326 x 167 x 229 cm • Exterior dimensions (LxWxH): 430 x 214 x 275 cm • Loading height: 38 cm • Permissible total weight: 2,600 kg • Unladen weight: 880 kg • Payload: 1,720 kg • Chassis: Low loader (wheels beside the bodywork) • Tyres: 165R13C • Suspension: KNOTT parabolic spring suspension • Jockey wheel: Yes • 100 km/h roadworthiness certificate: Optional, can be retrofitted DESCRIPTION • Chassis with parabolic leaf spring suspension for highest driving comfort • Large XL tack room with adjustable saddle holder, bridle holder, storage compartments • Aluminium floor • Aluminium walls • External tie rings • Internal tie rings • Split stall bars with plastic covering • Central post divider, swingable at front and rear, removable • Side padding on the walls and centre partition • Awning rail • Height adjustment for stall bars • Depth adjustment for stall bars • Emergency release • Extra padding on breast and tail bars • Right side access door, lockable • Door retainer on access door • Single axle wheel arch, plastic (black) • 12mm loose rubber mat on the floor • Hay net rings • Kick protection on side walls (GRP plastic) • Doors above rear ramp with emergency release - can remain open while driving • Maneuvering handles • Front windows / upper doors on both sides can be opened (vent and swing function) including protective grille on the inside • Roof vent • Gas strut lift assist for rear tailgate • Ramp & door combination on rear tailgate • Step platform at rear tailgate • Lockable cast iron tow coupling • LED interior lighting • Spare wheel with bracket mounted • Lighting system with reversing light • 3rd brake light at the rear • 13-pin connector Optional accessories - please inquire: • Aluminium rims (shown in the images - as additional equipment available at extra cost) • Shock absorbers (100km/h approval) • Protective cover for automatic jockey wheel • Anti-sway coupling • Downgrading for different total weight • Approach mirrors • Saddle storage bar • Wear mat / scratch mat • Interior video surveillance system • Reversing camera and much more. Podpfex S Riyjx Andogn New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration documents can be sent in advance or export/transfer license plates (Germany) can be provided. - Export license plates incl. customs clearance possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been a specialist dealer and repair workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Errors, omissions, and prior sale excepted -

Stanje: novo, Including front unload ramp / parabolic suspension / side padding / breast bar padding / 3rd brake light Technical Data: Pgedox S U Srjpfx Anden • Brand: Ifor Williams • Model: HBX 506 • Vehicle type: Horse trailer • Vehicle condition: New vehicle • First registration: None • TÜV/HU: 2 years from initial registration • Internal dimensions (LxWxH): 326 x 167 x 229 cm • External dimensions (LxWxH): 430 x 214 x 275 cm • Loading height (floor): 38 cm • Permissible gross weight: 2,600 kg • Unladen weight: 880 kg • Payload: 1,720 kg • Chassis: Low-loader (wheels positioned next to body) • Tyres: 165R13C • Suspension: KNOTT parabolic suspension • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Chassis with parabolic leaf suspension for superior ride comfort • Very wide front unload ramp on the right-hand side in the direction of travel • Aluminium floor • Aluminium side panels • External tying rings • Internal tying rings • Additional padding on breast and breech bars • Centre post partition, swing- and removable at front and rear • Side wall padding and partition padding • Awning rail • Height adjustment for breast bars • Depth adjustment for breast bars • Panic release • Lockable side entry door on the right • Door holder on entry door • Single wheel mudguards, plastic (black) • 12 mm loose rubber mat on floor • Hay net rings • Kick protection on side walls (GRP) • Doors above rear ramp with panic release - can remain open while driving • Manoeuvring handles • Front window / upper doors openable on both sides (tiltable and swingable) incl. internal protective grille • Roof vent • Gas strut lifter on rear ramp • Ramp & door combination at rear ramp • Step at rear ramp • Lockable cast iron tow coupling • LED interior lighting • Spare wheel with bracket mounted • Lighting system with reversing lights • 3rd brake light at rear • 13-pin plug Accessories available for retrofit – Enquiries welcome: • Aluminium rims • Shock absorbers (100 km/h approval) • Jockey wheel cover • Anti-sway coupling • Downgrading to different gross weights • Curb mirrors • Bracket for saddle • Anti-wear/scratch mat • Video surveillance system for interior • Reversing camera and more. New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration documents can be sent in advance or temporary registration plates (Germany) can be supplied. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a certified dealer and service workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Subject to errors, mistakes, and prior sale -

Stanje: zelo dobro (rabljeno), SD 506: Broschürenfinisher mit Mehrfachfalz-, Falz- und Heftfunktion sowie Schneidemodul Für Konica Minolta Press C 2060 / 1060 / C 1100 / C 6100 / C 3080 ... Als erfahrener Händler für gebrauchte Kopiersysteme verfügen wir über fundierte Fachkenntnisse in der professionellen Verpackung und Palettenversand, um unseren Kunden einen einwandfreien Zustand der Maschinen bei Anlieferung zu gewährleisten. Wir liefern Kopierer, die direkt von Konica Minolta Frankreich stammen und gewartet wurden. Psdpfx Anofyglgjdegn Unser Unternehmen bietet die größte Auswahl an Produktionsdruckern von Konica Minolta und organisiert auf Anfrage weltweite Lieferungen.