Donau Danusys 2910 nakup rabljenega (103)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.900 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, CNC vrtalno-rezkalni center Donau DANUSYS 2910, letnik 2002, obnovljen Tehnični podatki: Krmiljenje Heidenhain iTNC 530 Pomiki osi X, Y in Z: 2900 / 1000 / 700 mm Rezkanje St 60: 300 cm³/min Vrtanje v poln material St. 60: ø 40 mm Rezanje navojev: M30 Podajalna hitrost osi X, Y in Z: 7 / 7 / 7 m/min Vreteno HSK 63, 15000 obr/min Hlajenje IKZ in AKZ Menjalec orodij z 32 mesti, razdeljeno na 2 x 16 kosov Obnovljeni deli: - Vreteno popolnoma obnovljeno in na novo navito s strani proizvajalca - Servisiran regulator vretena - Obnovljena napajalna enota Heidenhain - Preverjen glavni računalnik Heidenhain MC422 in krmilna enota CC422 - Zamenjani vozički in vodila osi y Lsdewymtqspfx Ahuern Dodatna oprema: Ročni obroč HR 410 Transporter ostružkov z integriranim rezervoarjem za hladilno tekočino Dokumentacija (navodila za uporabo, različni priročniki uporabljenih dokumentov, električna shema itd.) Prodaja iz zaloge; vmesna prodaja pridržana

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 8.000 obr/min, Travelling column machine Completely overhauled in 2025 Worktable clamping surface mm 1500 x 1000 Table height mm 750 Lrodpfx Ahew I Tm Seujn Number of T-slots 7 T-slot size DIN 650 mm 18 Travel paths X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top to spindle nose min/max mm 150 / 850 Main spindle drive for speed 8000 rpm Tool holder SK 40 AC motor, frequency controlled kW 26 at 44% duty cycle Speed range: rpm 15 – 8000 Torque Nm 245 Internal coolant supply (IKZ) Chip conveyor band filter system Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min 30/30/20 Indirect linear measurement system Accuracy Positioning accuracy X, Y-axis over 1000 mm mm ± 0.0150 Repeatability X, Y-axis mm ± 0.0075 Positioning accuracy Z-axis mm ± 0.0150 Repeatability Z-axis mm ± 0.0075 24-position tool magazine, mounted on the left side of the machine - Tool stations 24 - Tool shank (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Machine control Heidenhain iTNC530

Stanje: rabljeno, Leto izdelave: 2006, x-pomik 2900 mm y-pomik 1000 mm z-pomik 700 mm Krmiljenje Heidenhain SK40 Lrsdpfx Ahsw S Nk Ieuon

Stanje: skoraj kot novo (rabljeno), Donau Donauflex 135 hitrohodni radialni vrtalni stroj Proizvajalec: Donau Tip: Donauflex 135 Leto izdelave: 2020 Stanje: Zelo dobro, rabljen, a kot nov Takoj na voljo iz zaloge. Lrodpfx Ajzgvmqjhusn

Stanje: rabljeno, Leto izdelave: 1980, Milling length 1750 mm Milling width 260 mm Module – max. 10 Module – min. 12 Total power requirement 8 kW Machine weight approx. 4500 kg Space requirements approx. m D O N A U – K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Year 1980 # 80-234x _____ Max. gear cutting length 1,750 mm Milling travel/crosswise milling width max. 260 mm Helical gearing up to 30° Module range steel/cast iron max. 10 to 12 Effective table clamping surface 275 x 1,830 mm Mounting height under milling spindle axis min./max. 150 / 430 mm Cutter diameter min. / max. Ø 108 + 2 x cutting depth / max. 165 mm Cutter width max. unsupported / with counter bearing 50 / 140 mm Cutter arbor diameter max. 22 - 50 mm 9 spindle speeds 29 – 178 rpm Milling slide swivels right / left 30° Milling spindle head swivels right / left 30 / 45° Lrodpfxot Hxage Ahuen Infinitely variable feeds (milling slide) 0 – 600 mm/min Rapid return 2,000 mm/min Milling spindle drive approx. 4 kW Total power requirement 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special equipment: • Automatic milling cycle control via cam plate on the milling head slide and on the table slide, with the possibility of skip control (automatic bypass of non-milling sections) and pendulum milling operation (synchronous milling on one table half and workpiece change on the other table half) • Hydraulic workpiece clamping device continuous approx. 260 x 1800 mm, clamping width max. 140 mm, clamping height approx. 60 mm, with separate hydraulic unit and electric actuation • Manual fine adjustment of the table (0.001 mm), e.g. for precise insertion into a pre-milled gear profile • Various change gears (approx. 10 pcs), 2 cutter arbors, central lubrication with pulser, built-in hydraulic system, separate coolant unit, separate control cabinet, various used rack milling cutters Price, ex stock plus VAT € 49,500.-- This machine is especially suitable for milling racks as well as for making broaching tools (back milling by swiveling the milling head). Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universelle, CNC-gesteuerte Zahnstangenfräsmaschine Typ: UZFM - V 300 H - CNC Baujahr: 1990, Seriennummer 90-244x Technische Daten: - Maximale Verzahnungslänge: 2.100 mm - Maximaler Fräsweg/Fräsbreite quer: 300 mm - Modulbereich (Stahl/Grauguss) bis max. 16/18 - Tischaufspannfläche: 510 x 2.400 mm bzw. 275 x 2.120 mm - Einbauhöhe unter Frässpindelachse (min./max.): 150 / 430 mm - Fräser-Durchmesser (min. / max.): Ø 125 mm + 2 x Schnitttiefe / Ø 280 mm - Max. Fräserbreite (fliegend / mit Gegenlager): 50 / 140 mm - Fräserdorn-Durchmesser max.: 22 - 50 mm - Frässpindelkopf schwenkbar für Hinterfräsungen: rechts 30°, links 45° - Frässchlitten schwenkbar für Schrägverzahnungen: ±30° - 9 Spindeldrehzahlen: 40 - 120 U/min - Stufenlos regelbare Vorschübe (Frässchlitten) / Eilgang: 0 - 1.300 / 2.000 mm/min - Tisch-Eilgang: 10.000 mm/min - Frässpindelantrieb: 5,5 kW - Gesamtantriebsleistung: 10 kW, 400V, 50 Hz - Maschinengewicht: ca. 5.000 kg Zubehör / Sonderausstattung: - SIEMENS CNC-Steuerung Modell M 810 für die Teilachse (X), schnelle Umrüstung ohne Wechselräder, programmierbare Teilungsdistanzen ab 0,001 - 2.100 mm - Einstellung aller Vorschub- und Eilgangswege hydraulisch, Vorschubeinstellungen für 2 Schnitte, Wegbegrenzung über voreinstellbare Endschalter - Hydraulische Werkstückspannvorrichtung, Spannlänge ca. 2.000 x 160 mm - Verstärkter Fräskopf mit stufenlos regelbarer Fräserdrehzahl - Separater Schaltschrank und Hydraulikanlage, im Tisch integrierter und separat aufgestellter Späneförderer mit Kühlmittelausstattung, Zentralschmierung - Nachrüstung mit aktueller SIEMENS-Steuerung möglich Lrodpfx Aot Hwwqjhuen ENGLISCH (MACHINESEEKER/INDUSTRY STYLE) D O N A U - K N A P P (Germany) Universal CNC-Controlled Rack Milling Machine Model: UZFM - V 300 H - CNC Year: 1990 - Serial No.: 90-244x Technical Details: - Max. cutting length: 2,100 mm - Max. cross milling stroke/width: 300 mm - Module capacity (steel/cast iron): max. 16/18 - Table clamping area: 510 x 2,400 mm or 275 x 2,120 mm - Mounting height under spindle (min./max.): 150 / 430 mm - Cutter diameter (min. / max.): Ø 125 mm + 2 x cutting depth / Ø 280 mm - Max. cutter width (unsupported / with counter bearing): 50 / 140 mm - Cutter arbor diameter max.: 22 - 50 mm - Milling head swivelling for relief cuts: right 30°, left 45° - Milling slide swivelling for helical gearing: ±30° - 9 spindle speeds: 40 - 120 rpm - Infinitely variable feeds (milling slide) / rapid traverse: 0 - 1,300 / 2,000 mm/min - Table rapid traverse: 10,000 mm/min - Milling spindle drive: 5.5 kW - Total electrical load: 10 kW, 400V, 50 Hz - Machine weight: approx. 5,000 kg Accessories / special equipment: - SIEMENS CNC-control model M 810 for indexing axis (X); rapid changes possible without change gears, programmable indexing distances from 0.001 - 2,100 mm - All feeds and rapid traverse adjustable via hydraulics, feed presets for 2 cuts, travel limits with pre-adjustable limit switches - Built-in hydraulic workpiece clamp, clamping area approx. 2,000 x 160 mm length - Heavy-duty milling head with stepless spindle speed adjustment - Separate control cabinet and hydraulic unit, integrated and free-standing chip conveyors with coolant equipment, central lubrication - Retrofitting with modern SIEMENS control possible Please let me know if you require this in another

Stanje: generalkompletno obnovljen (rabljeno), Popravilo krmilne plošče za vrtljaje za različne modele. Kontaktirajte nas, če prestave menjalnika ne delujejo pravilno. Lredpfx Ajy Rfzuohujn

Stanje: dober (rabljeno), Leto izdelave: 1988, Rapid Radial Drilling Machine Manufacturer: Donau Model: DR 40 DIGI CONTROL: NC Control Year of manufacture: 1988 APPLICATIONS – DRILLING Drilling capacity in steel (full hole): 40 mm Throat depth (max): 800 mm SPINDLE / HEAD Spindle speed (min): 335 rpm Spindle speed (max): 1800 rpm Number of speed ranges: 2 Tool taper: MT 4 SPECIFICATIONS Table surface: 1200 x 750 mm Lrodpfjikvcaex Ahujn ELECTRICAL SPECIFICATIONS Supply voltage: 400 V Frequency: 50 Hz DIMENSIONS / WEIGHTS Width: 2500 mm Depth: 1250 mm Overall height: 2500 mm Weight: 2.6 t Motor power: 6 kW

Stanje: rabljeno, Leto izdelave: 1980, Vpenjalo MK 3 Pomik: 4 stopnje Maks. število vrtljajev: 2580 Lsdpfxjzfqmps Ahusrn X-pomik: 2500 mm Iztek: 1000 mm Režasta plošča: 1000/2800 mm Teža: 3,7 t 2 paketa Za transport je potrebnih 7,5 nakladalnih metrov

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Dimensions and Travel Distances Tool Holder: SK 40 Table Size: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance, spindle lower edge (min.): mm 140 Distance, table upper edge (max.): mm 740 Drilling radius (min.): mm 540 Drilling radius (max.): mm 1590 U-axis travel: mm 2600 Y-axis travel: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling capacity, solid material St 60: mm 40 Drilling capacity, solid material GG 22: mm 50 Tapping capacity St 60: M 36 Tapping capacity GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled: kW 5.5 at 100% duty cycle Spindle speed range: rpm 15 - 2800 Maximum torque: Nm 250 Constant torque range: rpm 15 – 200 Feed Drives X-axis - AC servo motor: kW 0.25 Y-axis - AC servo motor: kW 0.25 Z-axis - AC servo motor: kW 4.50 W-axis - AC servo motor: kW 2.50 U-axis - AC servo motor: kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Infinitely variable feed rates: mm/min. 5 - 2000 Feed force: N 12000 Accuracy Positioning accuracy X, Y-axis over 1200 mm: mm ±0.075 Repeatability X, Y-axis: mm ±0.03 Positioning accuracy Z-axis: mm ±0.05 Repeatability Z-axis: mm ±0.03 Positioning accuracy W-axis: mm ±0.05 Repeatability W-axis: mm ±0.03 Electrical Data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), extendable Display: TFT flat panel, backlit, excellent readability from all angles Position indications: Cartesian or polar, dimensions absolute or incremental Unit of measurement: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool recommendations by machining operation, cutting data recommendations by material Tool management: max. 500 tools Subroutine technique: yes Machining cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible per cycle Chip breaking/chip removal: Possible in drilling cycle Drilling patterns: row, circle, matrix Basic software: Dialog programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry points Zero-point determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts Lredpfev If T Tsx Ahuon - Arbitrarily clamped round parts - Centering of castings and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Data interfaces: USB port Paintwork (new paint) Standard paint, two-component textured finish Machine upper section: light grey RAL 7035 Machine base: signal blue RAL 5005 Documentation Operating and programming manual Electronic wiring diagram Spare parts drawings Test protocol for mechanics, electronics, and safety device

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.000 mm, dolžina pomika po osi Y: 1.050 mm, dolžina podajanja os Z: 200 mm, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Dimensions and Travel Paths Tool Holder: SK 40 Table Dimensions (mm): 4000 x 800 Number of T-slots: 6 T-slot spacing (mm): 140 Distance Spindle Nose – Table Top (min./max. mm): 140 / 740 Drilling Radius (min./max. mm): 540 / 1590 Travel U-Axis (mm): 2600 Travel Y-Axis (mm): 1050 Quill Stroke (Z-Axis, mm): 200 Column Stroke (W-Axis, mm): 400 Machining Capabilities Drilling Capacity (solid material): St 60: 40 mm / GG 22: 50 mm Thread Cutting: St 60: M36 / GG 22: M42 Main Spindle Drive AC Motor, frequency controlled: 5.5 kW at 100% ED Speed Range (rpm): 15 - 2800 Max. Torque (Nm): 250 Constant torque from (rpm): 15 – 200 Feed Drives X-Axis – AC Servo Motor: 0.25 kW Y-Axis – AC Servo Motor: 0.25 kW Z-Axis – AC Servo Motor: 4.50 kW W-Axis – AC Servo Motor: 2.50 kW U-Axis – AC Servo Motor: 2.50 kW Rapid Traverse Speed (X/Y/Z) (m/min): 7.5 / 7.5 / 5 Rapid Traverse Speed (U/W) (m/min): 7.5 / 3 Infinitely variable feeds (mm/min): 5 - 2000 Feed Force (N): 12000 Accuracy Positioning Accuracy X-, Y-Axis over 1200 mm (mm): ± 0.075 Repeatability X-, Y-Axis (mm): ± 0.03 Positioning Accuracy Z-Axis (mm): ± 0.05 Repeatability Z-Axis (mm): ± 0.03 Positioning Accuracy W-Axis (mm): ± 0.05 Repeatability W-Axis (mm): ± 0.03 Electrical Data Operating Voltage / Frequency (V / Hz): 400 / 50 Control Voltage (V): 24 Total Connected Load (kVA): 13.0 Lrjdpfjy Ttrtox Ahujn CNC Control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat panel, backlit, clearly visible from all angles Position Display: Cartesian or polar, absolute or incremental Units: mm or inch; angles in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, suggests suitable tools by machining operation, cutting data recommendations based on material Tool Management: up to 500 tools Subprograms: Yes Machining Cycles: Centering, drilling, tapping, reaming, countersinking, boring, custom cycle for special tools, dwell time possible in any cycle Chip Breaking / Deburring: possible in drilling cycle Hole Patterns: Linear array, hole circle, matrix Base Software: Conversational programming, 38 zero point offsets, rotation/mirroring, teach-in for X, Y, Z, restart in program with selectable re-entry points Zero Point Determination: Cycles to determine zero points by manual probing for: - Randomly clamped right-angle parts - Randomly clamped round parts - Alignment of cast and flame-cut parts - Angle positioning for round parts by touching reference edges/surfaces Data Interfaces Paintwork with signs of use Standard paint, two-component textured finish Machine upper part: light grey RAL 7035 Machine base: light blue, RAL 5012 Documentation Operating and programming manual Electrical circuit diagram Spare parts drawings Inspection protocol for mechanics, electrics, and safety features

Stanje: rabljeno, Leto izdelave: 1971, Technical details: Drilling capacity in steel (diameter): 23 mm Max. workpiece height: ./x. 2 mm Drilling capacity in cast iron: Ø 26 mm Spindle taper: MT 3 Quill stroke: 135 mm (manual/automatic) Spindle speed: 7 steps rpm Feed range: mm/rev Table size: 1200 x 500 mm Table clamping surface: 1070 x 400 mm Lodov Ay T Djpfx Ahuorn Total power requirement: 3.55 kW Machine weight approx.: 1.4 t Machine dimensions approx. (LxWxH): 1.7 x 1.2 x 2.2 m Arm: - Vertical adjustment: 450 mm, horizontal adjustment: 610 mm - Swivel range 360°, hydraulically lockable Right- and left-hand rotation for tapping with automatic reversal Operation via control panel Coolant tank with pump

Stanje: rabljeno, Leto izdelave: 1960, Tehnične podrobnosti: Največja višina obdelovanca: 600 mm Izvesek: pribl. 700 mm Vrtalna zmogljivost v jeklu (premer): 25 mm Velikost mize: 1100 x 400 mm Stroj se trenutno nahaja v tehničnem oddelku. Lrjdpfx Aex Afn Nehuen Stroj zato NI objavljen/razstavljen. Dela na popravilu so še v teku.... *

Stanje: rabljeno, Leto izdelave: 1971, Dolžina rezkanja 1750 mm Širina rezkanja 260 mm Modul - maks. 10 mm Dimenzije mize vklj. z vodno odkapno žlebo 460 x 2100 mm Upenjalna površina mize: 250 x 1850 mm Maks. širina rezkarja 100 mm Pomik rezkalnega vozička, brezstopenjsko 0 - 500 mm/min. Hitri pomik 3000 mm/min Rezkalna glava - nagibna + / - 30° Območje vrtljajev rezkalne vretena, v 9 stopnjah 29 - 178 obr/min Lrjdsylpzyopfx Ahujn Rezkalna glava nagibna na obe strani za poševno ozobljenje 30° Teža stroja ca. 4 t Prostorska potreba ca. 4 x 1,85 x 1,85 m Oprema/Dodatki - 7 primežev - Menjalna kolesa - Vpenjalna sredstva - Dokumentacija

Stanje: novo, SPS krmilna plošča menjalnika Novo za staro Za samostojno montažo ali vgradnjo s strani enega od naših serviserjev Lodpoy Rkkhofx Ahusrn

Stanje: novo, Nadomestni deli za hitre radialne vrtalke Donau: Donau DR, Donau Danuflex, Donau Danumeric, Donau Danusys, Donauflex, Donaumeric. Lredpfxey Ri H Io Ahujn

Stanje: skoraj kot novo (rabljeno), Primerno za Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128 Lodpfx Ajy Ri Hnshujrn

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Lrodpjrn Riqofx Ahusn Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: pripravljen za uporabo (rabljen), DONAU DR 23 - Hitrotekoča radialna vrtalna naprava - Vrtalne zmogljivosti v jeklu: pribl. 28 mm - Izsev: 700 mm - Morsejev stožec MK 3 - Območje vrtljajev: 70-1550 o/min (menjalnik) - Avtomatski podajniki: 0,075-0,3 mm - Naprava za rezanje navojev Lredey Uv Tvepfx Ahusn - Vrtalna globina pribl. 130 mm - Hidravlična blokada - Dokumentacija Dimenzije: DxŠxV 2x1,7x1,9 metra / Teža 1900 kg Pridržujemo si pravico do napak ali sprememb.

Stanje: pripravljen za uporabo (rabljen), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Lrjdpfx Asyrdc Sehusn Spindle speed: approx. 15 – 2,800 rpm (stepless adjustment) Feed: stepless, approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column travel (W): 410 mm Arm travel: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swivel range: approx. 330° Column diameter: 195 mm You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop to view more of our offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description may occur and are subject to change.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Kapaciteta vrtanja St 60/GG 22: 40/50 mm Rezanje navojev St 60/GG 22: M 36/M 45 Vpenjalna površina mize: 600 x 1800 mm Višinsko nastavljanje izravnalnika: 450 mm Majhen/velik radij vrtanja: 305/1305 mm Vretenski nosilec: SK 40 Hod pinole: 200 mm Brezstopenjske vrtljaje vretena: 15 - 2800 obr/min Brezstopenjski podajalci: 5 - 2000 mm/min Pogon vretena, frekvenčno krmiljen: 5,5 kW Električni priklop: 400 V, 14 kVA Lrodpfsy I Ua Iox Ahuon Teža: 3400 kg Potreben prostor: 3800 x 2000 x 2500 mm

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC radialni vrtalni stroj, ki je bil leta 2018 generalno obnovljen. Delovno območje X/Y: 1050 mm/1800 mm, zmogljivost vrtanja v jeklo: 40 mm, zmogljivost vrtanja v litoželezo: 50 mm, rezanje navojev: M36-M45, vpenjalo za orodje: SK40, območje vrtljajev: 15 obr/min-2800 obr/min, hod pinole Z: 200 mm, hod stebra W: 410 mm, vpenjalna površina mize X/Y: 1800 mm/600 mm, hitrost podajanja: 5 mm/min-2000 mm/min, hitra pomika X/Y: 7,5 m/min, upravljanje: CNC upravljanje. Opremljen z 360° vrtljivo napravo, motoriziranim vpenjanjem orodja, trivilčnimi tokali za okrogle dele, posodobljenim LCD zaslonom, obsežnim paketom orodij. Teža: cca 2900 kg, skupne mere X/Y/Z: cca 2600 mm/1900 mm/2950 mm. Ogled možen po dogovoru. Ljdpfx Ahsy Tn Nteuorn

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Stepless speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots on the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base Lredpfxsyxw Ddo Ahuen • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travels Tool holder type SK 40 Column diameter 195 mm Table dimensions 1800 x 600 mm Number of T-slots 4 T-slot spacing 125 mm Quill travel (Z-axis) 200 mm Column travel (W-axis) 410 mm Distance spindle nose to table top (min.) 70 mm Distance spindle nose to table top (max.) 680 mm Distance spindle nose to floor (min.) 970 mm Distance spindle nose to floor (max.) 1580 mm Drilling radius 540 – 1590 mm Working table height 900 mm Machining Capacities Drilling capacity full material St 60: Ø 40 mm GG 22: Ø 50 mm Thread cutting St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled 5.5 kW at 100% duty cycle Speed range 15 – 2800 rpm Torque up to 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis AC servo motor 0.25 kW Y-axis AC servo motor 0.25 kW Z-axis AC servo motor 4.50 kW W-axis AC servo motor 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Feeds stepless 5 – 2000 mm/min Precision Positioning accuracy X/Y-axis over 1200 mm ± 0.075 mm Electrical Data Operating voltage/frequency 400V / 50Hz Control voltage 24V Hydraulic unit for clamping 0.75 kW Total connected load 13.0 kVA Weight Danumeric 440 (without packaging) with 1800 x 600 mm table 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, back-lit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Unit of measurement: mm or inch, also in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: up to 500 tools Subprogram technique: yes Machining Cycles Standard software options: dialog programming, 38 zero point shifts, rotate and mirror, Teach-In for X, Y, Z, program restart with selectable entry options Zero point determination: cycles for determining zero points by manual touch probe for: - arbitrarily fixtured rectangular parts - arbitrarily fixtured round parts - alignment of cast or flame-cut parts - angle determination on round parts by probing reference edges/surfaces Test graphics: graphical display of drilling patterns

Stanje: rabljeno, Leto izdelave: 2007, Drilling capacity in steel (diameter): 40 mm Arm reach: 1050 mm Spindle speed: 15 - 2800 rpm Feed range: 0.075 - 0.45 mm/min Dimensions: 2450 x 1300 x 2300 mm Weight: 1500 kg Equipment: - Machine in top condition - Serviced and overhauled by factory service in 2026 Lrsdpfxey Nd T He Ahuen Machine design: • Work table 1800 x 600 mm with 4 T-slots • Arm travel distance 1050 mm • Drill spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 18 mm T-slots at the rear of the machine base • 2 18 mm T-slots on the left side of the machine base • Thread cutting device • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and travel distances: Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z-axis): 200 mm Column stroke (W-axis): 410 mm Distance spindle nose – min. table top: 70 mm Max. table top: 680 mm Distance spindle nose – min. floor: 970 mm Max. floor: 1580 mm Drilling radius: 540 - 1590 mm Working table height: 900 mm Machining data: Drilling capacity, full material: Steel St 60 – Ø 40 mm Cast Iron GG 22 – Ø 50 mm Thread cutting: Steel St 60 – M36 Cast Iron GG 22 – M42 Main spindle drive: AC motor, frequency controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Max. torque: 250 Nm, constant from 15 – 2000 rpm Feed drives: X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Feeds stepless: 5 – 2000 mm/min Accuracy: Positioning accuracy X/Y axis over 1200 mm: ± 0.075 mm Electrical data: Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight of Danumeric 440 (without packaging, with table 1800 x 600 mm): 2800 kg CNC control: Axes: 3 (X, Y, Z) Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental units, unit in mm or inch as well as degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool recommendations by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subroutine technology: yes Standard software options: conversational programming, 38 zero point offsets, rotation and mirroring, Teach-In for X, Y, Z, restart in the program with selectable entry functions Zero point determination: cycles for determining zero points by manually probing the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges/surfaces Test-graphic: graphical display of drilling patterns

Stanje: rabljeno, Leto izdelave: 1968, Donau hitra radialna vrtalna stroj tip DR 32 Število obratov 60–1800 /min Izvleček 600 mm Osnovna plošča 100 x 1400 x 110 mm Naprava za rezanje navojev Sistem za hlajenje Strojna svetilka Lrjdpfx Ahox Hgkvousn Hitromenjalni nosilec z vložki Strojni primež