Donau Alpha nakup rabljenega (335)

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Drilling capacity steel/cast iron: 25mm/32mm, thread cutting capacity steel/cast iron: M20/M24, tool holder: MT4, spindle speed: 3500rpm, feed rate: 1050mm/min, outreach: 420mm-1320mm, arm travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Ncedpsu N Hdaofx Afmju

Stanje: skoraj kot novo (rabljeno), Donau Donauflex 135 hitrohodni radialni vrtalni stroj Proizvajalec: Donau Tip: Donauflex 135 Leto izdelave: 2020 Njdpfszgvmqsx Afmjcu Stanje: Zelo dobro, rabljen, a kot nov Takoj na voljo iz zaloge.

Stanje: rabljeno, Leto izdelave: 1980, Milling length 1750 mm Milling width 260 mm Module – max. 10 Module – min. 12 Total power requirement 8 kW Nsdpfx Aot Hxagofmocu Machine weight approx. 4500 kg Space requirements approx. m D O N A U – K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Year 1980 # 80-234x _____ Max. gear cutting length 1,750 mm Milling travel/crosswise milling width max. 260 mm Helical gearing up to 30° Module range steel/cast iron max. 10 to 12 Effective table clamping surface 275 x 1,830 mm Mounting height under milling spindle axis min./max. 150 / 430 mm Cutter diameter min. / max. Ø 108 + 2 x cutting depth / max. 165 mm Cutter width max. unsupported / with counter bearing 50 / 140 mm Cutter arbor diameter max. 22 - 50 mm 9 spindle speeds 29 – 178 rpm Milling slide swivels right / left 30° Milling spindle head swivels right / left 30 / 45° Infinitely variable feeds (milling slide) 0 – 600 mm/min Rapid return 2,000 mm/min Milling spindle drive approx. 4 kW Total power requirement 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special equipment: • Automatic milling cycle control via cam plate on the milling head slide and on the table slide, with the possibility of skip control (automatic bypass of non-milling sections) and pendulum milling operation (synchronous milling on one table half and workpiece change on the other table half) • Hydraulic workpiece clamping device continuous approx. 260 x 1800 mm, clamping width max. 140 mm, clamping height approx. 60 mm, with separate hydraulic unit and electric actuation • Manual fine adjustment of the table (0.001 mm), e.g. for precise insertion into a pre-milled gear profile • Various change gears (approx. 10 pcs), 2 cutter arbors, central lubrication with pulser, built-in hydraulic system, separate coolant unit, separate control cabinet, various used rack milling cutters Price, ex stock plus VAT € 49,500.-- This machine is especially suitable for milling racks as well as for making broaching tools (back milling by swiveling the milling head). Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universelle, CNC-gesteuerte Zahnstangenfräsmaschine Typ: UZFM - V 300 H - CNC Baujahr: 1990, Seriennummer 90-244x Technische Daten: - Maximale Verzahnungslänge: 2.100 mm - Maximaler Fräsweg/Fräsbreite quer: 300 mm - Modulbereich (Stahl/Grauguss) bis max. 16/18 - Tischaufspannfläche: 510 x 2.400 mm bzw. 275 x 2.120 mm - Einbauhöhe unter Frässpindelachse (min./max.): 150 / 430 mm - Fräser-Durchmesser (min. / max.): Ø 125 mm + 2 x Schnitttiefe / Ø 280 mm - Max. Fräserbreite (fliegend / mit Gegenlager): 50 / 140 mm - Fräserdorn-Durchmesser max.: 22 - 50 mm - Frässpindelkopf schwenkbar für Hinterfräsungen: rechts 30°, links 45° - Frässchlitten schwenkbar für Schrägverzahnungen: ±30° - 9 Spindeldrehzahlen: 40 - 120 U/min - Stufenlos regelbare Vorschübe (Frässchlitten) / Eilgang: 0 - 1.300 / 2.000 mm/min - Tisch-Eilgang: 10.000 mm/min - Frässpindelantrieb: 5,5 kW - Gesamtantriebsleistung: 10 kW, 400V, 50 Hz - Maschinengewicht: ca. 5.000 kg Zubehör / Sonderausstattung: - SIEMENS CNC-Steuerung Modell M 810 für die Teilachse (X), schnelle Umrüstung ohne Wechselräder, programmierbare Teilungsdistanzen ab 0,001 - 2.100 mm - Einstellung aller Vorschub- und Eilgangswege hydraulisch, Vorschubeinstellungen für 2 Schnitte, Wegbegrenzung über voreinstellbare Endschalter - Hydraulische Werkstückspannvorrichtung, Spannlänge ca. 2.000 x 160 mm - Verstärkter Fräskopf mit stufenlos regelbarer Fräserdrehzahl - Separater Schaltschrank und Hydraulikanlage, im Tisch integrierter und separat aufgestellter Späneförderer mit Kühlmittelausstattung, Zentralschmierung - Nachrüstung mit aktueller SIEMENS-Steuerung möglich ENGLISCH (MACHINESEEKER/INDUSTRY STYLE) D O N A U - K N A P P (Germany) Nedet Hwwqjpfx Afmscu Universal CNC-Controlled Rack Milling Machine Model: UZFM - V 300 H - CNC Year: 1990 - Serial No.: 90-244x Technical Details: - Max. cutting length: 2,100 mm - Max. cross milling stroke/width: 300 mm - Module capacity (steel/cast iron): max. 16/18 - Table clamping area: 510 x 2,400 mm or 275 x 2,120 mm - Mounting height under spindle (min./max.): 150 / 430 mm - Cutter diameter (min. / max.): Ø 125 mm + 2 x cutting depth / Ø 280 mm - Max. cutter width (unsupported / with counter bearing): 50 / 140 mm - Cutter arbor diameter max.: 22 - 50 mm - Milling head swivelling for relief cuts: right 30°, left 45° - Milling slide swivelling for helical gearing: ±30° - 9 spindle speeds: 40 - 120 rpm - Infinitely variable feeds (milling slide) / rapid traverse: 0 - 1,300 / 2,000 mm/min - Table rapid traverse: 10,000 mm/min - Milling spindle drive: 5.5 kW - Total electrical load: 10 kW, 400V, 50 Hz - Machine weight: approx. 5,000 kg Accessories / special equipment: - SIEMENS CNC-control model M 810 for indexing axis (X); rapid changes possible without change gears, programmable indexing distances from 0.001 - 2,100 mm - All feeds and rapid traverse adjustable via hydraulics, feed presets for 2 cuts, travel limits with pre-adjustable limit switches - Built-in hydraulic workpiece clamp, clamping area approx. 2,000 x 160 mm length - Heavy-duty milling head with stepless spindle speed adjustment - Separate control cabinet and hydraulic unit, integrated and free-standing chip conveyors with coolant equipment, central lubrication - Retrofitting with modern SIEMENS control possible Please let me know if you require this in another

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), skupna masa: 300 kg, skupna širina: 730 mm, skupna višina: 1.585 mm, laserska moč: 300 W, Ta 3-osni laser ALPHA LASER ALM 300 je bil proizveden leta 2019. Opremljen je z zmogljivim Nd:YAG laserjem s povprečno močjo 300 W in vršno impulzno močjo 9 kW. Delovno območje znaša 120 × 110 × 800 mm, kar omogoča široko paleto uporabnosti. Če iščete visokokakovostne laserske možnosti varjenja, priporočamo naš naprodajni stroj ALPHA LASER ALM 300. Za več podrobnosti nas kontaktirajte. • Tip laserja / valovna dolžina: Nd:YAG, 1.064 nm • Način delovanja: pulzni • Povprečna moč: 300 W • Vršna impulzna moč: 9 kW • Impulsna energija: 90 J • Trajanje impulza: 0,5–20 ms • Frekvenca pulza: posamezen pulz do 100 Hz • Premer varilne točke: 0,2–2,0 mm Nsdpfjzf A Ifox Afmecu • Fokusna leča: 150 mm (druge leče na voljo po podatkovnem listu leč) • Delovno območje / osi: • Hitrost pomika (X/Y/Z): 0–25 mm/s • Premik (X/Y/Z): 120 × 110 × 800 mm • Najnižja delovna točka: 530 mm • Najvišja delovna točka: 1590 mm • Dolžina roke: 1300 mm • Pogledna lupa / ergonomija: mikroskopski nastavek z okularji za uporabnike z očali 10× • Električni priključek: 3 × 400 V / 50–60 Hz / 3 × 16 A • Stanje: Uporabljeno izključno za demonstracije in razstave; tehnično in vizualno v odličnem stanju

Stanje: generalkompletno obnovljen (rabljeno), Popravilo krmilne plošče za vrtljaje za različne modele. Kontaktirajte nas, če prestave menjalnika ne delujejo pravilno. Ncjdpey Rfzujfx Afmou

Stanje: dober (rabljeno), Leto izdelave: 1988, Rapid Radial Drilling Machine Manufacturer: Donau Model: DR 40 DIGI CONTROL: NC Control Year of manufacture: 1988 APPLICATIONS – DRILLING Drilling capacity in steel (full hole): 40 mm Throat depth (max): 800 mm SPINDLE / HEAD Spindle speed (min): 335 rpm Spindle speed (max): 1800 rpm Number of speed ranges: 2 Tool taper: MT 4 Nedpsikvcasfx Afmscu SPECIFICATIONS Table surface: 1200 x 750 mm ELECTRICAL SPECIFICATIONS Supply voltage: 400 V Frequency: 50 Hz DIMENSIONS / WEIGHTS Width: 2500 mm Depth: 1250 mm Overall height: 2500 mm Weight: 2.6 t Motor power: 6 kW

Stanje: rabljeno, Leto izdelave: 1980, Vpenjalo MK 3 Pomik: 4 stopnje Maks. število vrtljajev: 2580 X-pomik: 2500 mm Ncodpfjzfqmpox Afmou Iztek: 1000 mm Režasta plošča: 1000/2800 mm Teža: 3,7 t 2 paketa Za transport je potrebnih 7,5 nakladalnih metrov

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Dimensions and Travel Distances Tool Holder: SK 40 Table Size: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance, spindle lower edge (min.): mm 140 Distance, table upper edge (max.): mm 740 Drilling radius (min.): mm 540 Drilling radius (max.): mm 1590 U-axis travel: mm 2600 Y-axis travel: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling capacity, solid material St 60: mm 40 Drilling capacity, solid material GG 22: mm 50 Tapping capacity St 60: M 36 Tapping capacity GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled: kW 5.5 at 100% duty cycle Spindle speed range: rpm 15 - 2800 Maximum torque: Nm 250 Constant torque range: rpm 15 – 200 Feed Drives X-axis - AC servo motor: kW 0.25 Y-axis - AC servo motor: kW 0.25 Z-axis - AC servo motor: kW 4.50 W-axis - AC servo motor: kW 2.50 U-axis - AC servo motor: kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Infinitely variable feed rates: mm/min. 5 - 2000 Feed force: N 12000 Accuracy Positioning accuracy X, Y-axis over 1200 mm: mm ±0.075 Repeatability X, Y-axis: mm ±0.03 Positioning accuracy Z-axis: mm ±0.05 Repeatability Z-axis: mm ±0.03 Positioning accuracy W-axis: mm ±0.05 Repeatability W-axis: mm ±0.03 Electrical Data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), extendable Display: TFT flat panel, backlit, excellent readability from all angles Position indications: Cartesian or polar, dimensions absolute or incremental Unit of measurement: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool recommendations by machining operation, cutting data recommendations by material Tool management: max. 500 tools Subroutine technique: yes Machining cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible per cycle Chip breaking/chip removal: Possible in drilling cycle Drilling patterns: row, circle, matrix Basic software: Dialog programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry points Zero-point determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of castings and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Data interfaces: USB port Paintwork (new paint) Standard paint, two-component textured finish Nsdpfev If T Tox Afmocu Machine upper section: light grey RAL 7035 Machine base: signal blue RAL 5005 Documentation Operating and programming manual Electronic wiring diagram Spare parts drawings Test protocol for mechanics, electronics, and safety device

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.000 mm, dolžina pomika po osi Y: 1.050 mm, dolžina podajanja os Z: 200 mm, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Dimensions and Travel Paths Tool Holder: SK 40 Table Dimensions (mm): 4000 x 800 Number of T-slots: 6 T-slot spacing (mm): 140 Distance Spindle Nose – Table Top (min./max. mm): 140 / 740 Drilling Radius (min./max. mm): 540 / 1590 Travel U-Axis (mm): 2600 Travel Y-Axis (mm): 1050 Quill Stroke (Z-Axis, mm): 200 Column Stroke (W-Axis, mm): 400 Machining Capabilities Drilling Capacity (solid material): St 60: 40 mm / GG 22: 50 mm Thread Cutting: St 60: M36 / GG 22: M42 Main Spindle Drive AC Motor, frequency controlled: 5.5 kW at 100% ED Speed Range (rpm): 15 - 2800 Max. Torque (Nm): 250 Constant torque from (rpm): 15 – 200 Feed Drives X-Axis – AC Servo Motor: 0.25 kW Y-Axis – AC Servo Motor: 0.25 kW Z-Axis – AC Servo Motor: 4.50 kW W-Axis – AC Servo Motor: 2.50 kW U-Axis – AC Servo Motor: 2.50 kW Rapid Traverse Speed (X/Y/Z) (m/min): 7.5 / 7.5 / 5 Ncjdoy Ttrtopfx Afmsu Rapid Traverse Speed (U/W) (m/min): 7.5 / 3 Infinitely variable feeds (mm/min): 5 - 2000 Feed Force (N): 12000 Accuracy Positioning Accuracy X-, Y-Axis over 1200 mm (mm): ± 0.075 Repeatability X-, Y-Axis (mm): ± 0.03 Positioning Accuracy Z-Axis (mm): ± 0.05 Repeatability Z-Axis (mm): ± 0.03 Positioning Accuracy W-Axis (mm): ± 0.05 Repeatability W-Axis (mm): ± 0.03 Electrical Data Operating Voltage / Frequency (V / Hz): 400 / 50 Control Voltage (V): 24 Total Connected Load (kVA): 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat panel, backlit, clearly visible from all angles Position Display: Cartesian or polar, absolute or incremental Units: mm or inch; angles in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, suggests suitable tools by machining operation, cutting data recommendations based on material Tool Management: up to 500 tools Subprograms: Yes Machining Cycles: Centering, drilling, tapping, reaming, countersinking, boring, custom cycle for special tools, dwell time possible in any cycle Chip Breaking / Deburring: possible in drilling cycle Hole Patterns: Linear array, hole circle, matrix Base Software: Conversational programming, 38 zero point offsets, rotation/mirroring, teach-in for X, Y, Z, restart in program with selectable re-entry points Zero Point Determination: Cycles to determine zero points by manual probing for: - Randomly clamped right-angle parts - Randomly clamped round parts - Alignment of cast and flame-cut parts - Angle positioning for round parts by touching reference edges/surfaces Data Interfaces Paintwork with signs of use Standard paint, two-component textured finish Machine upper part: light grey RAL 7035 Machine base: light blue, RAL 5012 Documentation Operating and programming manual Electrical circuit diagram Spare parts drawings Inspection protocol for mechanics, electrics, and safety features

Stanje: pripravljen za uporabo (rabljen), Wittenstein alpha SP 180X-MC1-7-0M1-2K planetno gonilo, serijska številka po sliki, rabljeno, z običajnimi sledmi uporabe, 100% delujoče, dobava po slikah. Nedpfx Ajy S Nmkjfmecu

Stanje: pripravljen za uporabo (rabljen), Alpha SPG 060-MF1-7-00/060S02 reduktor 20009454, serijska številka: 1159634, rabljen, dobro ohranjen, 100 % delujoč, obseg dobave v skladu s fotografijami. Ncodpfxsx Dtxfj Afmeu

Stanje: pripravljen za uporabo (rabljen), Wittenstein alpha SP 100S-MF1 menjalnik 36,9Nm 600/min 29A, rabljen, z manjšimi sledmi uporabe, 100% delujoč, dobava v skladu s fotografijami. Ncjdpfox Dwi Isx Afmeu

Stanje: pripravljen za uporabo (rabljen), Alpha SPG 75-MF1-7 menjalnik SN: 203771 - 6000 vrt./min, rabljen, dobro ohranjen, 100% delujoč, dobava kot na slikah. Nodpfx Aoy Nn Hksfmscu

Stanje: rabljeno, Leto izdelave: 1960, Tehnične podrobnosti: Največja višina obdelovanca: 600 mm Izvesek: pribl. 700 mm Vrtalna zmogljivost v jeklu (premer): 25 mm Velikost mize: 1100 x 400 mm Stroj se trenutno nahaja v tehničnem oddelku. Stroj zato NI objavljen/razstavljen. Dela na popravilu so še v teku.... Njdpfxox Afn Ne Afmscu *

Stanje: rabljeno, Leto izdelave: 1971, Technical details: Drilling capacity in steel (diameter): 23 mm Max. workpiece height: ./x. 2 mm Drilling capacity in cast iron: Ø 26 mm Spindle taper: MT 3 Quill stroke: 135 mm (manual/automatic) Spindle speed: 7 steps rpm Nsdpfxjv Ay T Do Afmecu Feed range: mm/rev Table size: 1200 x 500 mm Table clamping surface: 1070 x 400 mm Total power requirement: 3.55 kW Machine weight approx.: 1.4 t Machine dimensions approx. (LxWxH): 1.7 x 1.2 x 2.2 m Arm: - Vertical adjustment: 450 mm, horizontal adjustment: 610 mm - Swivel range 360°, hydraulically lockable Right- and left-hand rotation for tapping with automatic reversal Operation via control panel Coolant tank with pump

Stanje: rabljeno, Leto izdelave: 1971, Dolžina rezkanja 1750 mm Širina rezkanja 260 mm Modul - maks. 10 mm Dimenzije mize vklj. z vodno odkapno žlebo 460 x 2100 mm Upenjalna površina mize: 250 x 1850 mm Maks. širina rezkarja 100 mm Pomik rezkalnega vozička, brezstopenjsko 0 - 500 mm/min. Hitri pomik 3000 mm/min Rezkalna glava - nagibna + / - 30° Območje vrtljajev rezkalne vretena, v 9 stopnjah 29 - 178 obr/min Rezkalna glava nagibna na obe strani za poševno ozobljenje 30° Teža stroja ca. 4 t Prostorska potreba ca. 4 x 1,85 x 1,85 m Oprema/Dodatki - 7 primežev - Menjalna kolesa Nodeylpzyopfx Afmjcu - Vpenjalna sredstva - Dokumentacija

Stanje: novo, SPS krmilna plošča menjalnika Novo za staro Za samostojno montažo ali vgradnjo s strani enega od naših serviserjev Ncsdpey Rkkhefx Afmsu

Stanje: novo, Nadomestni deli za hitre radialne vrtalke Donau: Donau DR, Donau Danuflex, Donau Danumeric, Donau Danusys, Donauflex, Donaumeric. Nodpfsy Ri H Iex Afmecu

Stanje: skoraj kot novo (rabljeno), Primerno za Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128 Nodpfsy Ri Hnox Afmscu

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Ncsdpfx Aern Riqsfmou Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: pripravljen za uporabo (rabljen), DONAU DR 23 - Hitrotekoča radialna vrtalna naprava - Vrtalne zmogljivosti v jeklu: pribl. 28 mm - Izsev: 700 mm - Morsejev stožec MK 3 - Območje vrtljajev: 70-1550 o/min (menjalnik) - Avtomatski podajniki: 0,075-0,3 mm - Naprava za rezanje navojev - Vrtalna globina pribl. 130 mm - Hidravlična blokada - Dokumentacija Njdpfxsy Uv Tve Afmscu Dimenzije: DxŠxV 2x1,7x1,9 metra / Teža 1900 kg Pridržujemo si pravico do napak ali sprememb.

Stanje: pripravljen za uporabo (rabljen), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (stepless adjustment) Feed: stepless, approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column travel (W): 410 mm Arm travel: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swivel range: approx. 330° Column diameter: 195 mm You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. Ncodpfx Afsyrdc Somou For foreign customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop to view more of our offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description may occur and are subject to change.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 11.065 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 03001212-03.14, The ALPHA LASER ALM 200 laser welder was manufactured in Germany in 2014 by Alpha Laser GmbH, but has only been in operation since 2017. This mobile laser welder is equipped with a 200 W laser source (9 kW laser beam power), enabling repair and modification of a wide range of components for stamping dies, molds, injection molds, tools, and machine parts at any chosen location. Welding is performed in a semi-automatic mode. The mobile laser welding system features a narrow laser head that allows access to the inside of the welded component. Controlled via computer, joystick, and footswitch. The machine is in very good technical and visual condition, and has been regularly serviced. The machine is sold together with the table. Price: 170,000 PLN net (VAT invoice issued). Technical specifications of the ALPHA LASER ALM 200 laser welder: - Power: 200 W - Wavelength: 1064 nm - Movement speed (X, Y, Z): 0-25 mm/s - Travel range (X, Y, Z): 140 x 120 x 1300 mm Ncsdpfotqtrfox Afmou - Pulse energy: 90 J - Pulse duration: 0.5-20 ms - Pulse frequency: 100 Hz - Laser beam power: 9 kW - Laser beam diameter: 0.2-2.0 mm - Operating mode: pulsed - Focal length: 150 mm - Power supply: 380 V / 50-60 Hz / 16 A / 8 kW - Dimensions (W x D x H): 1410 x 730 x 1585 mm - Machine weight: approx. 320 kg - Operating hours: 11,065 - Serial number: 03001212-03.14 Additional features and equipment for the ALPHA LASER ALM 200: - Optics: LEICA microscope mount, 10x magnification (optionally 16x) - Display with keyboard - Multifunctional footswitch - Joystick - Adjustable laser arm - Complete workstation with table - Possibility to purchase spare parts and accessories at good prices, e.g. lamps, hoses, wire guides, balls/bases for workpieces, magnets, etc. - Possibility to purchase different types of welding wire at good prices - Possibility to add a fume extraction system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Kapaciteta vrtanja St 60/GG 22: 40/50 mm Rezanje navojev St 60/GG 22: M 36/M 45 Vpenjalna površina mize: 600 x 1800 mm Višinsko nastavljanje izravnalnika: 450 mm Majhen/velik radij vrtanja: 305/1305 mm Vretenski nosilec: SK 40 Nodpfxsy I Ua Is Afmjcu Hod pinole: 200 mm Brezstopenjske vrtljaje vretena: 15 - 2800 obr/min Brezstopenjski podajalci: 5 - 2000 mm/min Pogon vretena, frekvenčno krmiljen: 5,5 kW Električni priklop: 400 V, 14 kVA Teža: 3400 kg Potreben prostor: 3800 x 2000 x 2500 mm