Diversen Glogger She 2,6/20 Nachläufer Für Langmaterial ... nakup rabljenega (34.100)

Stanje: rabljeno, prva registracija: 01/2002, Leto izdelave: 2002, Interna številka za povpraševanja strank: 0-307-2 GLOGGER priklopnik za prevoz hlodovine ali dolgih materialov (!!! BREZ tovornjaka !!!) Redpfx Agoylun Estjt Vzmetenje listnato/listnato Dvojna montaža pnevmatik 315/80R22,5 Tehnično dovoljena skupna masa 20.000 kg Lastna masa 3.500 kg Dolžina vozila 4.300 mm Širina vozila 2.550 mm V ponudbi tudi nakladalna dvigalka LOGLIFT F251S 80A, letnik 2006 V kompletu skupaj za 15.000 € neto. Za dodatna vprašanja je na voljo naša prodajna ekipa. To je nezavezujoča ponudba. Vmesna prodaja, napake in spremembe so pridržane. = Dodatne informacije = Število prevoženih kilometrov: 123 km Lastna masa: 3.500 kg Nosilnost: 14.500 kg Skupna dovoljena masa: 18.000 kg

Stanje: rabljeno, - Nadstrešek za kontejner, primeren za 20'' kontejner! - Neuporabljen / Nov! - Cena: 1.500 EUR, neto + 19% DDV. Za dodatna vprašanja pokličite: Rjdpfx Aey Hnu Ajgtot Erik Kortum: WhatsApp Vsi podatki brez jamstva; pridržane so napake in vmesna prodaja.

Stanje: novo, številka stroja/vozila: 28b2dda4ac4da850b1010673a, lastna masa: 4 kg, največja dovoljena obremenitev: 33 kg, skupna masa: 38 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis: Semi-trailer for containers Fine-grain steel welded construction, fifth wheel plate with interchangeable kingpin and two kingpin positions Front locking at the tipper cylinder mounting bracket with guide wedges on both sides, rear locking on continuous rotary shaft with return spring Without subframe for self-supporting containers Container mounts: Transverse locking beams, double position for securing 1 x 20-foot containers (Note: Low kingpin load for 20-foot containers) 24-tonne, 2-speed landing gear, single-sided operation, with straight base, without load equalisation Free support leg corner dimension or free swing clearance to the rear approx. 1850 mm 2 wheel chocks with holder Half-shell mudguards with anti-spray mud flaps according to EU standards Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal width 48 mm (without hose connection) Operated hydraulically via truck PTO Rsdsi Ri Euepfx Agtst Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut Axles & Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tyre wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tonnes Gross train weight Air suspension Brake system 2-line compressed air brake system Colour-coded line routing for easy service Spring-actuated parking brake 2 non-interchangeable couplings at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that ensure ABS effectiveness! with lift & lower valve Vehicle - Driving Stability System Axle load detection via EBS CAN bus signal for display in the cab (truck must be suitably equipped, no truck installation included, not a calibrated scale) Wheels and Tyres 6 x 385/65 R22.5, manufacturer’s brand at the manufacturer’s choice 6 steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Country of registration / plates Germany with Dekra inspection and certificate (according to §13 EC Vehicle Approval Regulation) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on the side, red on the rear Paintwork Chassis DB 7350 Novagrau 10-year warranty against rust-through Support legs coated black Attention: Archive pictures!

Stanje: novo, številka stroja/vozila: 1f4581c873ed977cb9602039b, lastna masa: 3 kg, največja dovoljena obremenitev: 34 kg, skupna masa: 38 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information Chassis: Semi-trailer Container Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin. Container mounts: 1 x 20 ft centered (or swap body container 7.15 / 7.45), front not retractable, twistlocks for the longer version of the container restraint 24 t 2-speed landing gear, single side operation, with straight base, without compensating rod 2 wheel chocks with holder Side underrun protection Aluminum rear underrun protection Half-shell mudguards With anti-spray mudflaps according to EC Stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip plate, with perforated tread plates, approx. 400 mm wide, left and right between drip tray and longitudinal beam 4 hose storage compartments approx. 4500 mm long (hose box) for hose pipes 2 x DN 200 (outer) + 2 x DN 160 (centered), at the rear a hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) with all-round rubber seal, drain hole at lowest point, then without lid on hose pipes 1 stainless steel grounding lug in the right rear of the frame, with international grounding label on the frame Access steps rear right on underrun protection, at the rear right outside on main beam tread plate approx. 260 mm long and 300 mm wide Axles & suspension SAF disc brake axles Axle/chassis laser alignment reduces tire wear and fuel consumption Offset axle spacing mm (intermodal transport) up to 44t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and traction aid, actuation 3x brakes (traction assist functions up to 30% axle overload and at speeds of max. 25 km/h) Brake system 2-line compressed air brake system Color-coded line routing for easy service Spring chamber parking brake 2 interchangeable coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connecting cable Note: This trailer may only be towed by towing vehicles which ensure the effectiveness of ABS! With raise and lower valve Vehicle - driving stability system Axle load detection via EBS CAN bus signal, for display in the cab (truck must be prepared for this, not installed on truck, not a calibrated scale) Wheels and tires 385/65 R22.5 brand at manufacturer's choice Steel rims, factory silver Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights in front 2 white/red lane marker lights at rear 1 x 15-pin socket in front, without connecting cable Operating notes The specified gross weight is technically achievable; depending on the cargo, the permitted axle, support, and fifth wheel load limits may restrict the achievable gross weight. (Poor driving and tracking behavior possible due to incorrect load distribution) This vehicle may only be loaded with 20’ tank containers compliant with ISO 668 and especially ISO 1496-3! The tank containers must have "end load-transfer areas" (end crossbeam load transfer zones)! Country of registration / plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Redpoi Rixkefx Agtet Warning panel according to ECE-70 ADR approval according to 9.1.1.2 of the ADR, EX/II, EX/III / Approval certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning panel at rear, not valid for substances according to UN 0331 and 0332 (explosives B-E) Outline marking with reflective strips

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 12 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, teža obdelovanca (maks.): 15 kg, trajanje garancije: 12 meseci, skupna višina: 1.700 mm, vrsta vhodnega toka: Klimatska naprava, skupna širina: 750 mm, skupna dolžina: 900 mm, skupna masa: 300 kg, vhodna napetost: 230 V, obremenitev mize: 15 kg, leto zadnje generalne obnove: 2025, okoljska temperatura (maks.): 30 °C, temperatura okolja (min.): 12 °C, največja dovoljena obremenitev: 20 kg, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, Fully factory-refurbished and modernised Mahr MS222 multisensor coordinate measuring machine with state-of-the-art 64-bit CNC controller and Windows 11, including 12 months’ warranty and full support by a specialised company. The measuring machine has been comprehensively overhauled and upgraded at the factory, equipped with a modern new control system and the latest version of our measurement software. The machine will be delivered and installed at the customer’s premises at the stated price. Additional optional services: - On-site commissioning / calibration - Training courses - Contract programming for immediate start of measurements on your test parts Complete package includes: - Measuring machine - 64-bit CNC controller - Industrial PC with Windows 11 - Perpetual OptiCheck3D 2025 software license (full version of the measurement software, no subscription or maintenance contract required) Rodpjwcxb Sjfx Agtot - Multisensor head with high-resolution industrial camera - Renishaw TP20 touch probe system (alternatively, Renishaw TP200 probe system) including a standard force module - Calibration standard - Acceptance certificate / calibration certificate (condition prior to delivery) - Free delivery within Germany (EU and international shipping available on request) Details: Measuring range: 200x200x200 mm Load capacity (glass plate): 10 kg Scale resolution: 0.1 µm Max. traverse speed: 150 mm/s Dimensions: 900x750x950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Accuracy in accordance with VDI/VDE 2617 sheet 6, ISO 10360-2: U1 = 1.9 + L/200, U2 = 2.2 + L/150, U3 = 2.9 + L/100

Stanje: rabljeno, Leto izdelave: 2007, Hydraulic Hammer JAB JB20 – Year 2007 = Further Information = Year of manufacture: 2007 Suitable for: Construction machinery Reference number: T4 Please contact Miguel Cubas for more information. = Company Information = Redex U E Iijpfx Agtjt We are located between Antwerp and Brussels, along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Stanje: novo, Leto izdelave: 2025, barva: modra, NOV 20FT FLATRACK jeklena tla Lastna masa: 1.800 kg Nosilnost: 28.680 kg Največja dovoljena masa: 30.480 kg = Dodatne informacije = Splošne informacije Leto izdelave: avg. 2025 Letnik modela: 2025 Dimenzije Mere (D x Š x V): 606 x 244 x 33 cm Teže Lastna teža: 1.800 kg Rjdpexvrmfofx Agtet Nosilnost: 28.680 kg Skupna dovoljena masa: 30.480 kg Stanje Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dodatne informacije Za več informacij se obrnite na Arne Honingh.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Fire Suppression System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for ageing, performance, and safety tests of lithium-ion energy storage systems. Special Value: The device is engineered to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What does the device specifically do? (Point 2 – Performance & Application) - Ageing tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Long-term/temperature cycling and thermal shock tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the chamber - Safe test execution under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technologies Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing facilities - Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Integrated safety features include: - Automatic & manual CO₂ fire extinguishing system - Fire detector with optical & acoustic alarm - Mechanical double door locking (secure containment) - Spark protection inside the chamber - Exhaust port with reversible overpressure flap - Connections for external inerting (e.g. nitrogen) - Emergency stop / manual activation of the extinguishing system - Passthrough ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur without explosion or uncontrolled propagation. It is not an abuse or destruction test unit, but a compliant, safety-oriented test chamber for realistic operational and fault scenarios. Technical Key Data: - Temperature range: –10 °C to +100 °C - Internal volume: approx. 698 litres - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phases: single phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm Rjdpfxjx Sc Inj Agtst In Short – Why This Device Stands Out: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 L) - High market and resale appeal - Weight: approx. 285–300 kg Condition: used Scope of supply: (see picture) (Changes and errors in the technical specifications reserved!) For further questions, please contact us by phone.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2006, nosilnost: 150 kg, doseg roke: 2.700 mm, Tento systém je vybaven robotem KUKA KR 150, který je ovládán pomocí řídicí jednotky KRC2 ed05. Díky nosnosti 150 kg a dosahu až 2700 mm (v závislosti na variantě) nabízí optimální rovnováhu mezi flexibilitou a výkonem. Hlavní oblasti použití: - Obloukové svařování - Manipulace s materiálem - Obsluha CNC strojů - Řezání a broušení - Obecné montážní práce - Středně těžká paletizace Navrženo pro spolehlivou a univerzální automatizaci ve středních až těžkých průmyslových provozech. Model: KR 150 2000, rok výroby 2006 Stav: Použité, otestované, repasované Rok: 2006 (k dispozici i jiné varianty) Řídicí skříň: KRC2 ed05 Součástí dodávky: Manipulátor + řídicí skříň KRC2 ed05 + kompletní kabelové sady + výukový pendant + 1 rok záruky Služby repasování PLC MERKEZI zahrnují: • Čištění: Povrch panelu robota i samotného robota byl vyčištěn. • Výměna oleje: Oleje ve všech osách (6 os) robota byly vyměněny. • Výměna baterií: Všechny baterie byly vyměněny za nové. • Mechanická údržba: Ozubená kola a protiváhy byly kontrolovány a servisovány po zátěžových a opakovacích testech. • Elektronická údržba: Zahrnuje údržbu měničů, elektronických desek, výukového pendantu a PC. • Leštění a lakování: Po čištění je robot naleštěn a natřen do původní barvy, případně dle požadavku zákazníka. Pro nezávaznou cenovou nabídku a informace o možnostech repasování nás neváhejte kontaktovat. Jako PLC Merkezi EOOD máme skladem více než 300 robotů značek KUKA, ABB, FANUC a Motoman. Rodpfew H Nw Sox Agtot (Zdroj: Webové stránky Kuka)

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, nosilnost: 210 kg, doseg roke: 2.900 mm, proizvajalec krmilnikov: KUKA, model krmilnika: KRC2 ED05, Tento systém je vybaven riadiacou jednotkou KUKA KRC2 ed05 a modelom robota KR 210-2 2000. Rodjw H Nuqjpfx Agtot Robot ponúka nosnosť 210 kg a dosah ramena 2700 mm. Je vhodný pre aplikácie vyžadujúce vysokú presnosť. Hlavné oblasti použitia: Bodové a oblúkové zváranie Manipulácia s ťažkým materiálom Paletizácia Obsluha CNC strojov Automatizácia lisov Robot je navrhnutý na spoľahlivú prevádzku v náročných priemyselných podmienkach. Model: KR 210 KRC2 ED05 Nosnosť: 210 kg Dosah ramena: 2700 mm alebo 3100 mm Stav: Použitý a odskúšaný Rok: 2005 (viaceré možnosti k dispozícii) Riadiaca skrinka: KRC2 ED05 Zahrnuté: Manipulátor + riadiaca skrinka KRC2 ed05 + všetky káblové sady + programovací ovládač Teach Pendant Ako PLC Merkezi EOOD máme na sklade viac ako 300 robotov a pracujeme so značkami KUKA, ABB, FANUC a Motoman. Ponúkame tiež zákazkové inžinierske služby a návrhy podľa vašich špecifických výrobných požiadaviek. (Zdroj: stránka Kuka)

Stanje: novo, Leto izdelave: 2025, barva: modra, NOV 20FT FLATRACK trd lesen pod reže za vložke Rjdpfxeyvu I Ij Agtot Lastna masa: 1.600 kg Nosilnost: 28.880 kg Največja skupna masa: 30.480 kg 4x na voljo = Dodatne informacije = Splošne informacije Leto izdelave: dec. 2026 Modelno leto: 2026 Mere Dimenzije (D x Š): 606 x 244 cm Teže Teža praznega: 1.600 kg Nosilnost: 28.879 kg Dovoljena skupna teža: 30.480 kg Stanje Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dodatne informacije Za več informacij se obrnite na Arne Honingh.

Stanje: novo, Leto izdelave: 2025, barva: modra, NOV 20FT FLATRACK trd lesen pod reže za vložke Lastna masa: 1.600 kg Nosilnost: 28.880 kg Največja skupna masa: 30.480 kg 4x na voljo = Dodatne informacije = Splošne informacije Leto izdelave: dec. 2026 Modelno leto: 2026 Mere Dimenzije (D x Š): 606 x 244 cm Teže Teža praznega: 1.600 kg Nosilnost: 28.879 kg Dovoljena skupna teža: 30.480 kg Stanje Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dodatne informacije Rjdpfx Aeyvug Djgtjt Za več informacij se obrnite na Arne Honingh.

Stanje: rabljeno, številka stroja/vozila: 16772, Leto izdelave: 2013, obratovalne ure: 2.770 h, nosilnost: 2.000 kg, dvižna višina: 200 mm, težišče tovora: 600 mm, gradbena višina: 1.500 mm, dolžina vilic: 1.150 mm, skupna masa: 864 kg, tip motorja: Električni, proizvajalec: Still Rjdpfx Agex Rphrotjt

Leto izdelave: 2024, stanje: rabljeno, Usos y aplicaciones: El separador es más adecuado cuando una excavadora ligera debe trabajar con materiales pesados y resistentes. Derivado del modelo más ancho TSC.154, cuenta con el mismo sistema de impulsión y rodamientos, lo que proporciona mayor potencia en una superficie de cribado más pequeña. Los discos de estrella incorporados tienen 5 mm más de grosor que los discos estándar y poseen una protección antidesgaste adicional soldada. La distancia de separación de los discos es de 20 mm, lo que produce un cribado de 0-25/30 mm—ideal para la fabricación de material de relleno. Redpfx Asw Rkxqogtet El precio es sin placa de acoplamiento. Los adaptadores para excavadoras también pueden fabricarse y entregarse bajo pedido. Precio a consultar. Para excavadoras a partir de 11 t Para cargadoras de ruedas a partir de 8 t Peso en kg: 1200 Rendimiento: 30 – 45 m³/h ¿Requiere conexión de aceite de fuga?: no

Leto izdelave: 2021, stanje: rabljeno, Separator je bil v uporabi za proizvodnjo tekočih tal. Večinoma se je drobil šota, zato so vgrajeni tudi križni diski, ki zelo dobro drobijo material. Obloga iz PE zagotavlja, da material bolje drsi. Gredi so primerne za drobljenje biomase in komposta ter drugih mehkih materialov, kot je lubje ipd. Separator ima adapter za volanskosisteme Volvo, Cat, Liebherr ter zaščito proti prelivanju, ki preprečuje, da bi umazanija padla čez rob. Separator lahko opremimo tudi z drugimi gredmi, kot so sito gredi ali mešalne gredi. Opis v prilogi. Za bagre od 16 t dalje Za nakladalnike od 12 t dalje Teža v kg: 1600 Potrebna priključitev za iztekanje olja: 2 Rsdoyf Ar Ejpfx Agtjt Serija: TSC.184.007

Leto izdelave: 2025, stanje: rabljeno, Terra-Star Powerline TSP.124, širina reza 1200 mm, stroj ima s svojimi 4 gredami izjemen pretok! Vgrajene so sejalne gredi S204, v območjih obrabe so oklopljene – to daje zrnavost 0-25/30 mm, za presejanje grobega kamenja iz izkopa, ločevanje kamnov, vej, korenin, travnih ruš itn. Dodajanje zgoščene zemlje na sito zmanjšuje odpadke in povečuje pretok. Rodpfx Agoyf Arretst Vgrajen je nosilec za nakladalec Volvo L50-120. Cena brez adapterja. Za bagre od 18 t Za nakladalce od 10 t Teža v kg: 1850 Pretok: 52 - 77 m³/uro Potrebna povratna hidravlična povezava: 1 Serija: TSP.124.100

Stanje: rabljeno, Leto izdelave: 2017, skupna masa: 100 kg, Frachtna osnova: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100 % pred prevzemom stroja, neto Proizvajalec: TrioTechnik Tip: F3200 Stanje: kot novo SPLOŠNI PODATKI: - Rsdpfxoux Sigj Agtst Skupna priključna moč: 0,18 kW Krmiljenje: TC-130-G Navodila za uporabo: DEU-ENG-ESP-FRA-ITA Druga oprema: F3200 zalogovnik za zaboje, nastavljiv! Skupna teža: 100 kg Skupne mere D x Š x V: 350 x 70 x 110 cm

Stanje: rabljeno, Leto izdelave: 2019, Overview This returnable glass bottle filling line was installed in 2019 and essentially consists of a bottle washer, a rinser/filler/capper block, and a labeling unit with laser printer. The line is being sold as the previous owner is closing the brewery due to retirement. The filling line was operating flawlessly until the last day. The equipment is fully assembled, connected, and can be inspected on site at any time. Technical details - Output: max. 1,500 bottles/hour (actual operating rate: 1,000 bottles/hour) - Filled product: beer - Included formats: 0.33L longneck, 0.5L NRW Rjdexgfr Nepfx Agtot - Closure type: crown cork Scope of delivery - Bottle washer | SEN | 1989 (refurbished and installed 2020) - Isobaric filler block | Shandong Yuesheng | 2019 - Rinser stations: 14 - Filler stations: 12 - Capper stations: 5 - With pre-evacuation - Counter pressure filler incl. 2 formats: 0.33L longneck, 0.5L NRW - Drying tunnel | Shandong Yuesheng | 2019 - Labeling machine incl. laser printer - Collection table

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, številka stroja/vozila: P43058, skupna dolžina: 6.060 mm, skupna širina: 2.440 mm, skupna višina: 2.590 mm, 2017 GASCON 20FT ISO GAS tankkontejner, 24.959 l T50 UN PORTABLE izpust spodaj MAWP: 15,1 bar, testni tlak: 20,1 bar Projektna temperatura: -40/+55°C 5-letni + CSC pregled velja do 06-2028 = Dodatne informacije = Splošne informacije Leto izdelave: marec 2017 Modelno leto: 2017 Uporabni material: plin Teže Lastna teža: 5.750 kg Nosilnost: 31.250 kg Skupna dovoljena masa: 36.000 kg Funkcionalno Vsebina tovornega prostora: 25.000 l Proizvajalec nadgradnje: CIMC 2016, 20FT, 25.000L, L4BN, UN Portable, T11, parno ogrevanje, izpust spodaj, 5Y: 10/2022 Število komor: 1 Redpfeyn Ifpox Agtst Stanje Tehnično stanje: zelo dobro Optično stanje: zelo dobro Dodatne informacije Za več informacij kontaktirajte Arne Honingh.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, številka stroja/vozila: P43056, skupna dolžina: 6.060 mm, skupna širina: 2.440 mm, skupna višina: 2.590 mm, 2016, 20FT GASCON cisternski kontejner, 24.914L, T50, UN PORTABLE, izpust na dnu, MAWP: 15,1 bar, preizkusni tlak: 20,1 bar temperatura načrtovanja: -40/+55°C = Dodatne informacije = Splošne informacije Leto izdelave: dec. 2016 Modelno leto: 2016 Uporabni material: plin Teže Lastna teža: 5.750 kg Nosilnost: 31.250 kg Skupna masa: 36.000 kg Funkcionalno Vsebina nakladalnega prostora: 25.000 l Znamka nadgradnje: CIMC 2016, 20FT, 25.000L, L4BN, UN Portable, T11, parno ogrevanje, izpust na dnu, 5Y: 10/2022 Število prekatov: 1 Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Rodpjyn Eubsfx Agtet Dodatne informacije Za več informacij kontaktirajte Arne Honingh.

Stanje: dober (rabljeno), Technical data for the clothes rail: Shelving system: Stow Type: Stowshelf Included in delivery: 01x Clothes rail, used Total width: 1,258 mm For bay width: 1,265 mm Tube dimensions: 30 x 15 x 0.60 mm Weight per piece: 0.36 kg Material finish: Sendzimir galvanized 02x Bracket, used Total depth: 598 mm For upright depth: 600 mm Total height: 55 mm Material thickness: 1.5 mm Weight per piece: 0.51 kg Material finish: Sendzimir galvanized Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Rjdpfsul Slmsx Agtet General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These costs can be provided upon request, depending on the delivery location or the quantity ordered.

Stanje: dober (rabljeno), AGFA Avantra 30 with AGFA Rapiline Online Processor – system has been fully tested and cleaned. Resolutions: 1200, 1800, 2400, and 3600 dpi – includes Techkon film densitometer. We are happy to send you further information and pictures upon request. Fully overhauled in 2024. Rsdpfx Agjbr Aiajtet

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, AGFA Phoenix 2250 with online developer – system has been fully tested and cleaned. Resolutions: 1200, 1800, 2400 and 3000 dpi – max. 570 × 736 mm. Includes Techkon film densitometer. Further information and photos available upon request. Fully overhauled in 2024. Rodpfofl Sxqjx Agtjt

Stanje: dober (rabljeno), AGFA Avantra 25 in excellent condition. Supplied with 2 supply cassettes and one receiving cassette. The system has been fully tested and cleaned. Resolutions: 1200, 1800, 2400, and 3600 dpi – includes Techkon film densitometer. We are happy to provide you with further information and images upon request. Redpfx Agsbr Ah Ejtst Completely overhauled in 2022.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, številka stroja/vozila: 3069 / BM5132, BM5132 Professional pallet wrapper with stretch film Adjustable wrapping height Maximum wrapping height approx. 2,500 mm Turntable diameter 1,600 mm Maximum load capacity 1,600 kg Film roll width 500 mm Weight approx. 500 kg Rsdpoqpgl Rsfx Agtjt Power supply 400V - 50 Hz - 3 phase