Multisenzorski merilni stroj, merilni mikroskop

Mahr MS222 HA Refurbished 2025 Windows 11

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, teža obdelovanca (maks.): 15 kg, trajanje garancije: 12 meseci, vrsta vhodnega toka: Klimatska naprava, potovalna razdalja osi X: 200 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, 3D Coordinate Measuring Machine Mahr MS2VT Used multisensor CMM with motorized zoom and active vibration isolation Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2025. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and application support. Delivery available with factory service or via forwarding agent, worldwide. Online or on-site demonstrations with customer parts on request, application consulting by accredited Profitech measurement laboratories during the project phase. Complete service: – Delivery, setup, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and instructional programs available, including online courses. Rental, leasing, or financing possible directly through Profitech, no financial institution required. Measuring device can be individually configured to meet customer requirements. • Measuring range per individual sensor: 200x200x200mm • Dimensions: 900x750x950mm • Weight: approx. 170 kg • Accuracy: E2 = 2.4 + L/150 [µm] • Retrofit 2024 • incl. USB camera with fixed focal length • incl. LED ring light • incl. calibration standard • incl. dual-monitor operation • incl. new Windows 10 • incl. Opticheck3D 5.0 analysis software (12 months free software updates) Isdsdz Er Repfx Aa Uear Manufacturer's sample image (sister device)

Stanje: rabljeno, Leto izdelave: 2012, x-travel: 850 mm y-travel: 700 mm z-travel: 500 mm Control: Siemens 840 D Rotary table: 800 mm c-axis: 0.001º (±360º) B-axis (table): º mm Spindle speed: 18,000 rpm Tool holder: HSK 63 Tool changer: 38 positions Internal coolant supply: 80 bar Total power requirement: 43 kVA Machine weight approx. 10.6 t Hermle C 40 U Machining Center 5-axis KinematicOpt Adjustable operating panel 2 machining tables, Schunk zero-point clamping system Additional magazines: 43 positions Blow-off device Compressed air through spindle center Chip flushing gun Spindle cooling Electronic thermal compensation Electronic hand control module Renishaw probe BLUM tool breakage control Additional hydraulics for hydraulic workpiece clamping Iajdpeyxy E Refx Aa Usr The technical data are manufacturer or operator specifications and therefore non-binding for us. Interim sale reserved; exclusively our terms and conditions of business and sale apply. About us: More than 400 own machines in stock Over 15,000 m² warehouse space, crane capacity up to 70 t More than 10,000 items/accessories for your workshop If you wish to sell machines, complete production lines or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 2013, Swing diameter . mm Turning length 2000 mm Control Siemens 840 D sl Main spindle: max. speed 3800 rpm Ijdpfxsvu E R Se Aa Usar Main spindle: max. torque 1200 Nm Tailstock quill diameter 140 mm Center taper MK6 Tailstock force 5 - 30 kN Feed rate Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 t The machine can still be inspected under power at the vendor's plant. It is in good condition, with excellent turning accuracy. The milling drive is non-functional. A quotation from Niles for the repair of the milling drive is available upon request. Includes hydraulic steady rest.

Stanje: rabljeno, Leto izdelave: 2009, Pomik v osi X 600 mm Pomik v osi Y 450 mm Pomik v osi Z 450 mm Krmiljenje HEIDENHAIN - TNC 530 Hitrost vretena 18.000 obr/min Vpenjalo orodja HSK-A63 Število mest v menjalcu orodij 120 5-osni simultani obdelovalni center | HERMLE - C 20 U z IKZ (80 bar), NC-nagibno-rotacijska miza, menjalec za 120 orodij in menjalec palet. Stroj je v zelo dobrem stanju in ga je možno kadar koli videti pod napetostjo na švicarski lokaciji tovarne. Video posnetke stroja iz proizvodnega obrata vam bomo z veseljem posredovali na zahtevo. Iodpfxoyy A N Uj Aa Usar Za dodatne tehnične podatke in informacije o opremi si oglejte ponudbo.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2001, obratovalne ure: 10.356 h, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.100 mm, nazivna (navidezna) moč: 44 kVA, proizvajalec krmilnikov: Heidenhain TNC 430, teža obdelovanca (maks.): 5.000 kg, skupna višina: 4.200 mm, skupna dolžina: 7.900 mm, skupna širina: 8.800 mm, hitrost vretena (min.): 10.000 obr/min, Year of manufacture: 2001 CNC control: Heidenhain TNC 430 Axes Travel X-axis mm: 1800 Travel Y-axis mm: 2000 Travel Z-axis mm: 1100 C-axis indexing degrees: 360º (0.001) B-axis indexing degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 NC milling/turning table: Pallet dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Max. spindle speed rpm: 10000 Iedpfsyq Rpcex Aa Usar Spindle drive power kW: 44/32 (40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Coolant supply through spindle bar: 40 Tank capacity liters: 900 Tool system Tool holder: HSK-A 100 Number of tools in magazine: 60 Tool changer type: Double gripper Chip-to-chip time sec.: 13.5 Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rotating viewing windows Blow gun Operating mode 4 Tool breakage sensor Machine operating hours: Power-on time: 132612 Spindle running time: 68009 Basic machine: Dimensions / Weight Length mm: 7900 Width mm: 8800 Height mm: 4200

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Pomik X/Y/Z: 1000mm/500mm/635mm, držalo orodja: BT40, hitrost vrtenja: 10.000 obr/min, mesta za orodja: 40, krmiljenje: Haas, ure vretena: ca. 4500h. 3-osni robotski sistem System 3R WorkPartner, leto izdelave: 2005, prenosna teža: 80kg, hod: 1500mm, mesta za palete: 20. Vključuje ničelno vpenjalni sistem System 3R GPS 240, merjenje orodja, kontrolo loma orodja, 3D merilno tipalo Renishaw in odsesavanje oljne meglice. Dokumentacija je na voljo. Ogled na lokaciji je možen. Ijdpfx Aaexg Riae Ujar

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Vrsta raster elektronskega mikroskopa Zeiss XB 350 Oprema in dodatki • brez FIB stebra Iodpfx Ajw Rdvvsa Uoar • programska oprema SmartSEM in SmartFIB • GIS s Pt-prekurzorjem • integrirani plazemski čistilec • EDX Oxford Xplore 30 (vklj. vmesnik in programska oprema) • avtomatska 200 mm prehodna komora • električni prehod (2 x 15 kanalov) • obtokovni hladilnik • Quiet Mode vakuumski rezervoar • ... kot tudi miza, zaslon, upravljalne konzole (lastniška tipkovnica in joystick Zeiss) ter različni nosilci vzorcev Prva uporaba: avgust 2024 Lokacija: Mainz Razpoložljivost: po dogovoru takoj na voljo. Naprava je še vedno v uporabi in si jo lahko ogledate ter jo testirate. Naprava je brez napak ali poškodb in je v celoti funkcionalna. Dodatne informacije na zahtevo!

Stanje: zelo dobro (rabljeno), Sunnen GH210 Horizontalni honalni stroj Leto izdelave: 2010 Maksimalni hod: 8000 mm Iodpjw U Uh Dsfx Aa Usar Hitrost vretena: 0 - 300 rpm Maksimalna moč vretena: 40 KM (29,83 kW) Maksimalna moč pomika: 18 KM (13,42 kW) Razpon hitrosti pomika: 0 – 100 ft/min (0 – 30,5 m/min) Notranji premer (I.D.): 2 – 24 palcev (50,8 – 609,6 mm) Zunanji premer (O.D.): 26 palcev standard (660,4 mm) Največja teža obdelovanca: 8000 kg Približna teža stroja: 12.066 kg Napajanje: 400 VAC 50 Hz, 3-fazno (85 A) Siemens Simatic krmiljenje,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, 1000 mm nihajni premer, 760 mm maksimalni obdelovalni premer, 1540 mm maksimalna dolžina struženja, 4000 obr/min glavno vreteno, 76 mm kapaciteta palic, 12000 obr/min rezkalno vreteno, 18,5 kW, Iaedpjw Azz Uofx Aa Uer C-os s korakom 0,001 stopinje, Y-os -/+115 mm, ATC z 40 postajami, 22 kW motorji vretena, krmilje FANUC 31i, 3-čeljustna hidravlična vpenjalna glava, transporter za odrezke, hladilni sistem

Stanje: rabljeno, Leto izdelave: 2000, Table length 1160 mm Iajdpfxst Hw S Is Aa Usr Table width 710 mm Clearance 650 mm Control system WENZEL ME 5007 Total power requirement kW Machine weight approx. 800 kg Space requirements approx. m W E N Z E L CNC-controlled vertical 3-D coordinate measuring machine Type LH 54 CNC, year of manufacture 2000 - Continuously maintained and calibrated by the manufacturer Y-axis: longitudinally traversing measuring bridge 600 mm X-axis: crosswise measuring head slide 500 mm Z-axis: vertical measuring quill approx. 400 mm Max. workpiece weight / table load approx. 200 kg Clearance under measuring bridge approx. 650 mm Usable total table size approx. 1,160 x 710 x 160 mm Table height above floor approx. 850 mm Machine height approx. 2,300 mm Weight approx. 800 kg Special equipment / accessories: • Machine delivered with increased accuracy • Measuring table, bridge, and quill made of dark natural hard stone, table with 3 x 4 threaded holes for fixture/workpiece mounting • All axes are air-bearing, enabling smooth and virtually wear-free operation, equipped with incremental scales with 0.0005 mm resolution. • WENZEL CNC control system type ME 5007 for 3 to 6 axes, equipped with ME 4700 portable manual control panel with 2 joysticks for activating all software functions – ideally set up for: • WENZEL measuring software type METROLOG – II Level 2 for measuring regular geometry, graphic 3D workpiece visualization, graphical protocols, etc. including keyboard • RENISHAW control unit model PHC 10 – 2 suitable for • RENISHAW motor-driven rotary and swivel head (automatically indexable in 7.5° steps), model PH 10 T with 5-way probe system model TP 200 with various probe accessories, incl. RENISHAW probe interface PI 200 Automatic probe change possible; 6-position probe magazine model SCR 200 mounted on the table • Reference sphere for mounting on the table, working table with console, various clamping devices • Various cassette tapes and CDs with different software. Separate PC for measuring software and printer Condition: Very good – in stock, can be inspected under power, ready for demonstration, dismantled by a coordinate measuring machine specialist at the seller and reassembled here. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.