Cts Temperaturna Preizkusna Komora Z Zaščito Pred Eksplozijami nakup rabljenega (57.454)

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), CTS Model: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control: 32-bit controller LCD control panel Digital display of set and actual values Numeric entry of set values Clear-text error messages RS 232 interface Free switching channels for customer-side test specimen control Temperature tests: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: With nitrogen inertization, the test chamber is initially purged with a large amount of N₂ until the oxygen content drops below 3%. Then it switches to a base flow (approx. 10% of the full purging amount). The baseline nitrogen flow is measured with a flow meter, displayed, and monitored via a limit switch. O₂ monitoring continuously extracts gas from the test chamber via a flame arrestor and channels it over an O₂ sensor to monitor the residual oxygen content in the extracted air. After measurement, the gas passes through a second flame arrestor back into the test chamber. The exhaust pump is monitored by a flow meter. Further details can be found in the user manual by Dräger in the appendix. Note: The gas system is currently out of service! The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test material, without radiation, and without additional equipment. Dimensions: Fjdpfx Acozd Rzwedogf Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection rating: IP 54 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level:

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: TE6110019, Polavtomatski razdelilnik za nalepke s pečatom za nanašanje nalepk s pečatom na vogale zložljivih škatel z zatiči. Fodpfozqfu Eox Acdegf

Stanje: zelo dobro (rabljeno), Ponujamo klimatsko testno komoro podjetja Weiss s funkcijo vlaženja! Klimatsko testno komoro je podjetje Weiss/Vötsch zadnjič pregledalo decembra 2020. Izvedli so vse potrebne teste, v našem podjetju pa smo ponovno izvedli testni cikel, pri čemer smo s kalibriranimi merilnimi pripomočki preverili vlažnost in temperaturo. Klimatsko testno komoro smo preverjali vsako leto in je v brezhibnem stanju! Priložen je tudi zapisnik. WEISS 1500SB/010JU/40DU Temperaturno območje: -40 °C – +180 °C Vlažnost: 15 % – 95 % Način delovanja za klimatske teste: +10 °C – +95 °C Prostor za testiranje: 1500 litrov Notranje mere: 1490 mm globina, 1100 mm širina, 945 mm višina Fjdpfszn U A Tjx Acdsgf Zunanje mere: 2470 mm širina, 2000 mm višina, 1450 mm širina Teža: približno 1100 kg Hladilno sredstvo: R404a, 2,00 kg Komora nima nog in stoji stabilno na okvirju. Če imate dodatna vprašanja, nas lahko kadarkoli kontaktirate!

Stanje: zelo dobro (rabljeno), CTS Type: C-40/350 Air-Cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is engineered for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research sectors. Temperature Testing: - Temperature range: -40°C to +180°C - Temporal temperature deviation: ≤ ±0.3 K - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% r.H. - Dew point range: +5°C to 78°C - Temporal temperature deviation: ≤ 1.0 K - Temporal humidity deviation: ≤ +3.0% r.H. Technical specifications are based on an ambient temperature of +25°C, rated voltage of 400V, without test specimen, heat compensation, or additional equipment. Options may affect performance data. Technical Specifications: - Refrigeration unit: air-cooled, low-noise, fully hermetic, continuously variable capacity via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load capacity: 150 kg/m² - Shelf: stainless steel, support area 620 x 600 mm - Max. load per shelf: 35 kg - Total load at maximum shelf configuration: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numeric input of set values - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for customer-side specimen control Dimensions: - Test volume: 350 liters - Internal dimensions (H x W x D): 750 x 650 x 720 mm Fgodpfx Aszizmzscdjf - External dimensions (H x W x D): 1800 x 920 x 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Stanje: zelo dobro (rabljeno), Weiss Model: WK3-340/40 Weiss Climate Test Chamber, Air-Cooled Temperature Testing Volume: 335 liters Test Chamber Dimensions: Internal chamber: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature: -42°C Maximum temperature: +180°C Temperature change rate, cooling: 4 K/min Temperature change rate, heating: 3.2 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature uniformity spatial: ±0.5 to ±1.5 K Climatic Testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature uniformity spatial: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % RH Fsdjziyygspfx Acdsgf Halogen lamp: 2 x 24V, 50W Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: Approx. 515 kg For your safety as a buyer, please note the following information! The following points are carried out on all chambers we offer before sale: 1. Functional inspection and replacement of necessary components 2. If necessary, new charge with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with touch panel) Features of this control system: - Color touchscreen with intuitive menu navigation (usually 5.7" or larger) - Programming of temperature/humidity profiles with ramp and dwell times - Data acquisition & logging (e.g., temperature progression, alarms) Fodpfxsziyxps Acdjgf - USB port for data export (CSV, S!MPATI-compatible if applicable) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optional Modbus or Profibus VT³ 4100 – Technical Data (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min - Maximum thermal compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Interior dimensions (W×D×H): 1100 × 950 × 950 mm - Exterior dimensions (W×D×H): 1390 × 1955 × 1995 mm Feedthroughs: The test chamber is fitted with port openings on the right and left sides. These allow measurement lines and test devices to be routed into the test space. - 1 x L1 DN 50 mm - 1 x R1 DN 125 mm - 3 x R1 DN 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Sound level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Where needed, refilling with a legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical specifications and details!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer a temperature test chamber. Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Fodpfxsziygms Acdegf Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated easily by touching the function icons on the »Touch Panel«. Leveling Feet To compensate for floor unevenness and ensure adequate ventilation of the machine components, the test chamber is equipped with adjustable feet. Feed-throughs Feed-throughs are fitted on both the right and left sides of the test chamber. These allow test leads and testing devices to be routed into the test space. Feed-throughs come as standard: R1: nominal width 125 mm L1: nominal width 50 mm Test Space Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal deviation: ±0.1 to ±0.5 K Spatial deviation: ±0.5 to ±2.0 K Temperature change rate in accordance with IEC 60068-3-5: Heating: 4 K/min. Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH Temporal temperature deviation at center: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Temporal humidity deviation at center: ±1 to ±3 % RH Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 5.9 kW Rated current: 12.0 A Power cable: 3.5 m Fuse protection: 16 A slow-blow, to be provided by buyer Refrigerants: R-404A and R-23 Test Chamber Volume: approx. 190 liters Weight: approx. 460 kg net For your safety as buyer, please note the following information! The following steps are carried out on our offered chambers in advance: Fodpfxozh Huhj Acdogf 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical specifications and information are subject to change and error!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VBT 03/500 Air-cooled Temperature test chest with spray device Technical Description: Data for temperature tests without water: Temperature range: -30°C to +80°C Temperature deviation in stabilized state according to IEC 60068-3-5, depending on test chamber temperature temporal ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: Water level is below the insert rack Water level = 0 mm: Water level is at the top edge of the insert rack Standard spray device data: Number of spray nozzles: 6 Spray rate per nozzle: 0.5 l/min Spray device data as per EN 539-2, Method B: Number of spray nozzles: 6 Spray rate per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray rate per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Pre-tempered water tank data: Volume: approx. 2000 l Pre-tempering temperature range: +5°C to +40°C Temperature change duration: Fedpfszh D S Rsx Acdjgf Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Setup and operation data: Test chamber: width 1120 mm, depth 840 mm, height 540 mm Housing: width 2700 mm, depth 1300 mm, height 1575 mm Water tank: width 1100 mm, depth 800 mm, height 2200 mm Feed-throughs: 1 feed-through, ø 50 mm, installed on the left Test chamber capacity: approx. 500 liters Refrigerant: R-404a Electrical connection: Rated voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: approx. 26 kW Rated current: approx. 44.0 A (neutral conductor is loaded) Protection: 63 A gG, provided by customer Weight: approx. 890 kg net For your safety as a buyer, the following information: The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant if necessary 3. Leak tightness test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data are subject to change and errors!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Technical Specifications: - With a temperature change rate of 25 K/min - Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm - External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm - Temperature range: -72°C to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 - Spatial temperature uniformity: ±0.5 to ±2.0 - Cooling rate: 25 K/min - Heating rate: 25 K/min - Heat compensation at -20°C: 8000 W - Heat compensation at +20°C: 8000 W - Test volume: 270 liters - 2x side feedthroughs ∅ 125 mm - 1x side feedthrough ∅ 50 mm - Chamber is water-cooled Test chamber lighting: - LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 26 kW - Rated current: 44 A - Refrigerants: R-452A and R-23 - Weight: approx. 980 kg Important safety information for you as the buyer! Fedpfx Acjzg Eygsdsgf The following points are carried out in advance on all chambers we offer: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented trial run Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and information!) We will gladly answer any further questions by phone.

Leto izdelave: 2011, stanje: rabljeno, Hydronic system, hydraulic power unit, diaphragm expansion vessel, air receiver, pressure vessel, pressure tank, compressed air tank, air reservoir, -electric heater -Manufacturer: Schniewindt -Type: 97/DF 15 -Power: 15 kW -Connection: DN30 in stainless steel Fjdpfx Acsd Dvgpsdjgf -Permissible operating overpressure: -Centrifugal pump -Manufacturer: Tamel 2.2 kW -Quantity: 2 units available -Price: per unit -Cabinet dimensions: 940/740/H1870 mm -Weight: 406 kg

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber, Climate Chamber VLM 3068/S Air-cooled (top-loading test chambers for building materials) Control Panel The control panel is mounted on a console on top of the temperature test chamber. All control and operation commands can be triggered by simply touching the function symbols. The operating manual for the control panel is included. Main Switch The main switch is located at the front of the temperature test chamber. Air Treatment Chamber The air treatment chamber is located inside the test chamber and contains the assemblies necessary for temperature control. In the air treatment chamber, the air is conditioned (heated/cooled) and circulated by the test chamber fan. Air is drawn in through the center of the side wall and re-enters the test chamber via air duct panels located along the longitudinal sides. Feedthroughs The temperature test chamber can optionally be equipped with feedthroughs, allowing cables and test equipment to be introduced into the test chamber. Feedthroughs: front 2 x 82 mm Ø, rear 1 x 85 mm Ø Internal Dimensions: Width 2000 mm x Depth 570 mm x Height 600 mm External Dimensions: Width 3000 mm x Depth 870 mm x Height 1060 mm Technical Data: Mechanical loading data: Max. load for specimens/test material Test chamber floor (evenly distributed) 600 kg Point load 50 kg Temperature test data: Temperature range: -30°C to +125°C Temporal temperature deviation at center of working space: ±1 K Temperature change rate: Heating approx. 1 K/min Cooling approx. 2 K/min Fgodpozgbmijfx Acdef Operational data: Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 3 kW Rated current: 9 A Customer-side fuse: 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume: approx. 680 l Weight: approx. 700 kg Refrigerant: R-404A Noise level: Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors; all information is without guarantee!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Here we are offering a Weiss climate test chamber. Weiss Climate Test Chamber, water-cooled (Refrigerant converted to R-452A) Temperature Testing Volume: 335 liters Test chamber dimensions: Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature: –42°C Maximum temperature: +180°C Temperature change rate, cooling: 4 K/min Temperature change rate, heating: 3.2 K/min Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Climatic testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3 % r.h. Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-452A Model: WK3-340/40 Weight: approx. 515 kg For your safety as a buyer, please note the following information! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) Fgodpfx Acjzgavvedof (Specifications and technical data may be subject to change and errors!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vötsch VC7034 klimatska testna komora – 340 litrov | -40 °C do +180 °C | upravljanje preko zaslona na dotik Zračno ali vodno hlajenje Na prodaj je visokokakovostna klimatska testna komora Vötsch VC7034 za zahtevne temperaturne in klimatske teste na področju razvoja, zagotavljanja kakovosti, raziskav in proizvodnje. Vötsch je že desetletja eden vodilnih proizvajalcev naprav za simulacijo okoljskih pogojev in je sinonim za najvišjo natančnost, zanesljivost in dolgo življenjsko dobo. Komora ima prostorno testno območje približno 340 litrov in omogoča testiranje v temperaturnem razponu od -40 °C do +180 °C. Zmogljiv sistem kroženja zraka zagotavlja enakomerno porazdelitev temperature po celotnem testnem prostoru. Upravljanje je intuitivno preko preglednega zaslona na dotik. Robustna notranjost iz nerjavnega jekla nudi dovolj prostora za različne testne predmete in aplikacije. Veliko opazovalno okno omogoča spremljanje testiranih objektov med delovanjem. Tehnični podatki: Proizvajalec: Vötsch Industrietechnik Model: VC7034 Tip: klimatska/temperaturna testna komora Fgedpfx Aszdpvascdof Temperaturno območje: -40 °C do +180 °C Notranji volumen: pribl. 340 litrov Testni prostor iz nerjavnega jekla Dinamično kroženje zraka Veliko opazovalno okno Upravljanje preko zaslona na dotik Industrijska robustna izvedba Področja uporabe: elektronika, avtomobilska industrija, letalstvo in vesolje, testiranje materialov, raziskave in razvoj Oprema in prednosti: ✔ Precizno upravljanje temperature v celotnem temperaturnem območju ✔ Vrhunska industrijska kakovost Vötsch ✔ Prostorna notranjost z možnostjo različnih nivojev polic ✔ Uporabniku prijazno upravljanje ✔ Odličen dostop zaradi širokega odpiranja vrat ✔ Enakomeren pretok zraka za ponovljive testne rezultate ✔ Idealno za neprekinjeno uporabo v laboratorijih in proizvodnji Stanje: Naprava je v zelo lepo ohranjenem rabljenem stanju. Notranjost je čista, vstavne rešetke so priložene, tesnilo vrat je v dobrem vizualnem stanju. Ogled in preizkus delovanja sta možna po dogovoru. Na voljo sta izvedbi – zračno ali vodno hlajena Vötsch VC7034 klimatsko testno komoro nudimo tako v zračno kot v vodno hlajeni izvedbi. Zračno hlajene enote potrebujejo le priključek na električno omrežje in so takoj pripravljene na uporabo brez dodatne infrastrukture. Odvečno toploto, ki nastane pri procesu hlajenja, oddajajo neposredno v okolico. Ta izvedba je posebej primerna za laboratorije, delavnice in proizvodna okolja, kjer je zaželena enostavna in fleksibilna namestitev. Vodno hlajene enote obratujejo preko zunanjega kroga hladilne vode. Toplota se odvaja s toplotnim izmenjevalnikom in tako ne obremenjuje prostora, kjer je naprava postavljena. Te enote so še posebej primerne za neprekinjeno delovanje, industrijsko uporabo in testne laboratorije z obstoječo hladilno vodo. Prednosti zračno hlajene izvedbe: ✔ Ni potrebe po priklopu na hladilno vodo ✔ Enostavna in cenovno ugodna montaža ✔ Takojšnja pripravljenost za uporabo ✔ Možnost fleksibilne postavitve ✔ Idealno za standardne aplikacije Prednosti vodno hlajene izvedbe: ✔ Večja energijska učinkovitost pri neprekinjenem delovanju ✔ Manjša toplotna obremenitev prostora ✔ Zelo primerno za 24/7 delovanje ✔ Optimalna rešitev za industrijska testna okolja ✔ Pogosto nižja raven hrupa Z veseljem vam svetujemo pri izbiri.

Leto izdelave: 2019, stanje: Okvarjen nosilec rezervnih delov (rabljen), Funkcionalnost: nefunkcionalno, Pomembno obvestilo o stanju artikla Prosimo, da pred nakupom natančno preberete: Ta artikel izvira iz likvidacije podjetja ali skladišča. Naprave nismo mogli preveriti glede delovanja, zato jo izrecno prodajamo kot NETESTIRANO, OKVARJENO in NEOFUNKCIONALNO. Ponudba je namenjena izključno serviserjem, tehnikom za popravilo ali kot donor rezervnih delov. Prodaja poteka brez kakršnegakoli jamstva za delovanje ali popolnost. Opis izdelka Naprodaj je industrijska klimatska testna komora/komora za temperaturno in vlažnostno testiranje proizvajalca SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Naprave te vrste se običajno uporabljajo za testiranje materialov, simulacije staranja ali preizkušanje elektronskih komponent pod določenimi temperaturnimi in vlažnostnimi pogoji. Oprema in vizualne značilnosti (glede na slike): • Notranjost: Visokokakovostna notranjost iz nerjavečega jekla, enostavna za čiščenje. Vključno z masivno perforirano rešetko (polica iz žične mreže). • Priključki in dostopi: Stranski kabelski prehod (port) z zamaškom za namestitev merilnih sond ali električnih kablov za testirani predmet. • Tehnični del: Tehnični prostor na strani je lahko dostopen (vgrajena je elektronika, kontaktorji, releji, ventilatorski motorji in rezervoar za vodo iz nerjavečega jekla za vlažilno enoto). • Mobilnost: Težka naprava je nameščena na štirih stabilnih vrtljivih kolesih in jo je mogoče enostavno pozicionirati na mestu uporabe. • Drugo: Manometer na zunanji strani, odtočna/priklopna cev v spodnjem delu. Tehnični podatki (po tipski tablici) • Proizvajalec: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (vpisano ročno) • Leto izdelave / datum: 14.08.2019 • Serijska številka: SS-SC19011 • Napajanje: 1 faza, 220V AC • Tok: 30A Videz naprave Naprava ima glede na starost in uporabo sledi uporabe (praske, rahle nečistoče, razbarvanja). Ena bočna obloga za tehnični del manjka ali je bila za fotografiranje odstranjena (prosimo, preverite slike). Tesnila na notranjosti delujejo vizualno nepoškodovana. Vse prikazane notranje komponente (vezja, kabli, rezervoar za vodo) so vključene v paket, vendar ni zagotovila za njihovo delovanje ali popolnost. Fgodpfx Acjzcxbwjdof Obseg dobave • 1x klimatska testna komora SHENGS STH-2P-C (kot je prikazano na fotografijah) • 1x žična mreža (že vstavljena v notranjosti) • Nobena dodatna oprema, priročniki ali testna poročila niso priloženi. Informacije o dostavi in prevzemu Zaradi velikosti in velike teže pošiljanje preko običajne paketne službe ni mogoče. • Prevzem: Priporočen je osebni prevzem kupca (prinesite ustrezno prevozno vozilo in po potrebi pomočnika/voziček za dvigovanje). • Pošiljanje po špediciji: Možna je po dogovoru in ob prevzemu stroškov s strani kupca (kupec naroči špediterja ali se stroški transporta zaračunajo posebej).

Stanje: dober (rabljeno), Feutron Temperature Test Chamber -40 to +100°C The Feutron TPK 3403/125 is a workhorse for standardized temperature testing thanks to its robust construction. Main application areas for this model: 1. Electronics and Component Testing This is the most common area of use. It's about how components react to extreme temperatures: - Functional Testing: Does the board still operate reliably at -40°C or +150°C? - Burn-in Tests: Artificial aging of components through continuous operation at high temperatures to provoke early failures. 2. Material Testing Examination of physical changes in materials: - Brittleness: Do plastics or rubber seals become brittle in the cold? - Deformation: Do composites warp under heat? - Storage Tests: How stable are chemicals or adhesives over long periods at constant temperature? 3. Quality Assurance (QA) - Sample Testing: Series-accompanying tests to ensure that production complies with specified temperature ranges. - Standard Testing: Performing tests according to common industry standards (e.g., DIN EN 60068), which require specific temperature profiles. 4. Research & Development - Prototyping: Testing new enclosure designs or materials under controlled thermal conditions before moving to mass production. Manufacturer: Feutron Model: TPK 3403/125 Temperature Range: -40 to +100°C Refrigeration Unit: Air-cooled condenser Temperature Stability: approx. ±0.1 to ±0.5 K Usable Volume: approx. 125 liters Refrigerant: R22 Operating Overpressure: 23 bar Power Supply: 220/280V-3-50Hz Supply Line Fuse: 25 A Protection Class: IP 20 Weight: 480 kg "All from a single source: We are pleased to offer you suitable bank financing for your project." Fgjdpfx Acsy Nynaedof komplett-konzept.leasingo.de More items – new and used – can be found in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Hodišna temperaturna komora za testne, preizkusne ali tudi proizvodne procese. Temperaturno območje +40°C do +80°C s stabilnostjo regulacije +/- 1°C. Klimatizacija z recirkulacijskim kanalom (približno 3000 m³/h) in električnim grelcem približno 6 kW. Zunanje mere: 4800 x 3200 x 2430 (globina, širina, višina v mm) Notranje mere: 4560 x 2960 x 2160 (globina, širina, višina v mm) Površina komore: približno 13,5 m² Prostornina komore: približno 29,2 m³ Oprema: - Vrata s širino 1200 mm in višino 2000 mm z vgrajeno rampo za enostavno nakladanje. - Okno na vratih. - Talne plošče iz 1,5 mm debele, protidrsne pločevine iz nerjavečega jekla, lepljene na 15 mm debelo, vodoodporno vezano ploščo za enakomerno porazdelitev obremenitve. Protizdrsni razred R11. Dovoljena obremenitev na kolo: 2500 N. - Visokokakovostna izolacija s 120 mm poliuretanske pene za visoke temperature, U-vrednost v skladu s standardom DIN EN 13165: 0,17 W/m²*K. - Temperaturno odporna stropna razsvetljava LED. - Temperaturno odporni kanali na desni in levi strani s skupno 6 vtičnicami 230 V. - Nadzorni sistem Siemens S7-1200 in 7-palčni barvni zaslon na dotik. - Vgrajena PID-regulacija za temperaturo. - Snemanje in grafični prikaz poteka temperature. - Jasen prikaz sporočil o napakah in sledenje zgodovine ter zaščita z geslom. - Potencialno neobremenjeni stikalni kontakti za nadaljnji prenos alarmov. Električni priključek: AC400V / 3Ph/N/PE / 50 Hz. Fgsdpfx Aozpy Idecdsf Napravo si lahko ogledate po predhodnem dogovoru. Kupec mora napravo razstaviti in odpeljati. Ker se lokacija obratovanja opušča, ni mogoče zagotoviti nobene logistične podpore.

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), Vötsch ClimeEvent C/340/70/5/S – podnebna testna komora (posebna izvedba)!! Proizvajalec: Vötsch Industrietechnik GmbH Tip: ClimeEvent C/340/70/5/S Letnik proizvodnje: 2019 Tip stroja: podnebna testna komora / testna komora za temperaturo in vlago Prostornina testne komore: približno 340 litrov Opis Za prodajo je rabljena Vötsch ClimeEvent C/340/70/5/S testna komora za temperaturo in klimo, letnik 2019. Ta naprava je posebna izvedba s tremi stransko izvlečnimi teleskopskimi testnimi predali. Testni vzorci se lahko udobno pripravijo, priklopijo zunaj testne komore in nato vstavijo v testno komoro. Zaradi tega je ta naprava še posebej primerna za serijske teste, razvojne naloge, dolgotrajne teste in aplikacije s pogostimi zamenjavami vzorcev. Fedpozp Nv Defx Acdegf Vsak testni predal ima košaro iz nerjavečega jekla in ločeno zapiralni sprednji del z lastno odprtino za testne vzorce. Tri ločene testne ravni omogočajo preprost vnos več testnih vzorcev ali sklopov v eno samo testno komoro. Naprava je opremljena, med drugim, z nadzorno ploščo WEBSeason Touch, regulacijo temperature in vlage, sistemom za pripravo stisnjenega zraka Donaldson in obsežno dokumentacijo. Naprava je primerna, med drugim, za: Testiranje temperature Testiranje klime Simulacijo okolja Testiranje materialov Testiranje elektronike Testiranje komponent Testiranje baterij Testiranje senzorjev Zagotavljanje kakovosti Raziskave in razvoj Teste staranja in obremenitve Tehnični podatki Proizvajalec: Vötsch Industrietechnik GmbH Tip: ClimeEvent C/340/70/5/S Letnik proizvodnje: 2019 Prostornina testne komore: približno 340 litrov Temperaturno območje: približno -70 °C do +180 °C Hitrost spremembe temperature: približno 5 K/min Maks. kompenzacija toplote: približno 3.000 W Odstopanje temperature v času: ±0,1 do ±0,5 K Homogenost temperature v prostoru: ±0,5 do ±1 K Temperaturni gradient: ≤2 K Priključek na električno omrežje: 3/N/PE AC 400 V ±10 % / 50 Hz Nazivna moč: 9 kW Nazivni tok: 20 A Hladilno sredstvo 1: R449A – 2,50 kg Hladilno sredstvo 2: R23 – 0,75 kg Maks. nizek tlak: 21 bar(g) Maks. visok tlak: 25 bar(g) Delovni tlak R23: 13 bar(g) Dimenzije Zunanje mere (V × Š × G): približno 1.800 × 895 × 1.810 mm Mere testne komore (V × Š × G): približno 750 × 580 × 765 mm Teža: približno 650 kg Oprema Nadzorna plošča WEBSeason Touch Regulacija temperature in vlage Notranjost iz nerjavečega jekla Veliko opazovalno okno 3 stransko izvlečni teleskopski testni predali 3 košare iz nerjavečega jekla Ločeno zapiralni predali Ogrevani vložki predalov Odprtine za testne vzorce Ultrafilter Donaldson za pripravo stisnjenega zraka Transportni podatki Zunanje mere (V × Š × G): približno 1.800 × 895 × 1.810 mm Teža: približno 650 kg Stanje Rabljen / Used Naprava je bila pregledana v delavnici in podvržena dokumentiranemu testnemu teku. Optično stanje ustreza slikam. Obseg dobave Vötsch ClimeEvent C/340/70/5/S – podnebna testna komora 3 teleskopski testni predali 3 košare iz nerjavečega jekla Ultrafilter Donaldson Dodatna oprema glede na slike Možna je dostava ali pošiljka preko špediterja. Pridržujemo si pravico do sprememb, napak in vmesne prodaje. Za dodatna vprašanja smo vam z veseljem na voljo po telefonu.

Stanje: zelo dobro (rabljeno), Vötsch VCS³ 7034-5 klimatska testna komora / temperaturna testna komora Proizvajalec: Vötsch Industrietechnik GmbH Tip: VCS³ 7034-5 Tip naprave: klimatska testna komora / temperaturna testna komora Prostornina testne komore: približno 335 litrov Naprodaj je rabljena klimatska testna komora Vötsch VCS³ 7034-5 z vodnim hlajenjem in hitrostjo spreminjanja temperature 5 K/min. Testna komora je primerna za profesionalne temperaturne in klimatske teste, simulacijo okoljskih pogojev, testiranje materialov, zagotavljanje kakovosti, teste elektronike ter razvojne in obremenitevne teste. Tehnični podatki: Proizvajalec: Vötsch Industrietechnik GmbH Tip: VCS³ 7034-5 Prostornina testne komore: približno 335 litrov Temperaturno območje: -70 °C do +180 °C Hitrost spreminjanja temperature (ogrevanje): približno 7,0 K/min Hitrost spreminjanja temperature (hlajenje): približno 6,7 K/min Časovni odklon temperature: ±0,1 do ±0,5 K Prostorski odklon temperature: ±0,5 do ±2,0 K Klimatsko območje: +10 °C do +95 °C Območje rosišča: +4 °C do +94 °C (razširjeno do -3 °C, občasno) Območje vlažnosti: 10 do 98 % relativne vlažnosti Odklon vlažnosti: ±1 do ±3 % relativne vlažnosti Hladilno sredstvo: R404A / R-23 Količina hladilnega sredstva: R404A 2,5 kg / R-23 0,75 kg Največji dovoljeni tlak (ND): 21 bar(g) Največji dovoljeni visokotlačni tlak (HD): 25 bar(g) Električni priključek: 3/N/PE AC 400 V ±10 % / 50 Hz Fsdozpihaopfx Acdjgf Nazivna moč: 9 kW Nazivni tok: 20 A Varovalka na strani uporabnika: 63 A, počasi reagirajoča Dimenzije: Zunanje mere (Š × G × V): približno 870 × 1.700 × 1.775 mm Notranje mere / testna komora (Š × G × V): približno 580 × 765 × 750 mm Teža: približno 570 kg Oprema: Krmilnik S!MPAC Upravljanje na dotik Notranjost iz nerjavečega jekla Regulacija temperature in vlažnosti Ethernet vmesnik USB vmesnik Kabelska uvodnica 50 mm Kabelska uvodnica 125 mm Funkcija zaščite testnih vzorcev Dodatna oprema glede na slike Transportni podatki: Dimenzije (Š × G × V): približno 870 × 1.700 × 1.775 mm Teža: približno 570 kg Stanje: Rabljeno / Used Vizualno stanje glede na slike. Obseg dobave: Klimatska testna komora Vötsch VCS³ 7034-5 Dodatna oprema glede na slike Razpoložljivost: po dogovoru. Obseg dobave, kot je prikazano na slikah. Pridržujemo si pravico do sprememb, napak in prodaje predhodno.

Stanje: zelo dobro (rabljeno), Vötsch VC 4034 klimatska testna komora / temperaturna testna komora zračna hladitev Fjdpfxszng Unj Acdsgf Proizvajalec: Vötsch Industrietechnik GmbH Tip: VC 4034 Tip naprave: klimatska testna komora / temperaturna testna komora Prostornina testnega prostora: približno 335 litrov Naprodaj je rabljena Vötsch VC 4034 klimatska testna komora podjetja Vötsch Industrietechnik GmbH. Temperaturna in klimatska testna komora z zračno hladitvijo je primerna za profesionalne temperaturne in klimatske teste, simulacije okoljskih razmer, preizkušanje materialov ter razvojne in obremenitvene teste. S temperaturnim območjem od -40 °C do +180 °C in območjem vlažnosti od 10 do 98 % relativne vlažnosti ponuja naprava optimalne pogoje za reproducibilne testne postopke v raziskavah, razvoju, zagotavljanju kakovosti in industriji. Tehnični podatki: Proizvajalec: Vötsch Industrietechnik GmbH Tip: VC 4034 Prostornina testnega prostora: približno 335 litrov Dimenzije testnega prostora: približno 580 × 765 × 750 mm (Š × G × V) Zunanje dimenzije: približno 780 × 1.758 × 1.800 mm (Š × G × V) Teža: približno 515 kg neto Temperaturno območje: -40 °C do +180 °C Sprememba temperature (ogrevanje): približno 3,2 K/min Sprememba temperature (hlajenje): približno 3,5 K/min Odklon temperature: ±0,1 do ±0,5 K Homogenost temperature: ±0,5 do ±1,5 K Območje vlažnosti: 10 do 98 % relativne vlažnosti Odklon temperature pri klimatskem delovanju: ±0,1 do ±0,3 K Homogenost temperature pri klimatskem delovanju: ±0,5 do ±1,0 K Priključitev na omrežje: 3/N/PE AC 400 V +10 % / 50 Hz Nazivna moč: 4,1 kW Nazivni tok: 12,5 A Oprema: Upravljanje s pomočjo zaslona na dotik Testni prostor iz nerjavečega jekla Okno v vratih Osvetlitev testnega prostora Stranska odprtina Rešetka Sistem z zračno hladitvijo Dokumentacija / navodila za uporabo Dodatna oprema v skladu s slikami Področja uporabe: Temperaturni testi Klimatski testi Simulacije okoljskih razmer Preizkušanje materialov Preizkušanje elektronike Zagotavljanje kakovosti Raziskave in razvoj Razvojni in obremenitveni testi Stanje: Rabljeno Klimatska testna komora je v rabljeno stanju. Vizualno stanje ustreza starosti in je razvidno na slikah. Obseg dobave: Vötsch VC 4034 klimatska testna komora Rešetka Upravljalna plošča / krmilnik Dodatna oprema v skladu s slikami Miza ali drugi predmeti, ki niso izrecno omenjeni na slikah, niso del ponudbe. Po dogovoru je možen prevoz s špediterjem ali osebni prevzem. Pridržujemo si pravico do sprememb, napak in medčasne prodaje.

Stanje: zelo dobro (rabljeno), Na prodaj klima komora Vötsch VT 7004, namenjena natančnim raziskavam in testiranjem v nadzorovanih temperaturnih pogojih. Naprava se uporablja v laboratorijih, oddelkih za nadzor kakovosti, pri raziskavah materialov, v elektroniki in avtomobilski industriji. Komora je opremljena z elektronskim regulatorjem temperature, učinkovitim hladilnim sistemom in prisilnim kroženjem zraka, ki zagotavlja enakomerno porazdelitev temperature po celotni delovni komori. Notranjost, izdelana iz nerjavečega jekla, olajša čiščenje in zagotavlja visoko vzdržljivost. Tehnični podatki: Proizvajalec: Vötsch Industrietechnik GmbH Model: VT 7004 Leto izdelave: 2000 Serijska številka naprave: 58566024350010 Napajanje: 230 V AC, 50 Hz Fodpezi U Tnjfx Acdjgf Nazivna moč: 2,0 kW Nazivni tok: 10 A Hladilno sredstvo: R404A – 0,7 kg R23 – 0,22 kg Najvišji dovoljeni delovni tlak: 25 bar Notranjost: nerjaveče jeklo Elektronski regulator temperature Prisilno kroženje zraka Vrata s silikonsko tesnilom Osvetlitev in servisni dostop v komori Kompaktna konstrukcija Stanje: Naprava je bila uporabljena. Vizualno v dobrem stanju. Komora je čista in popolna. Prodaja se v stanju, kot je prikazano na slikah.

Stanje: zelo dobro (rabljeno), Naprodaj je profesionalna klimatska komora Vötsch VTL 7010, namenjena izvajanju temperaturnih testov in simulacij okoljskih razmer. Naprava se uporablja v laboratorijih, oddelkih za nadzor kakovosti, raziskovalno-razvojnih centrih ter pri testiranju elektronskih, avtomobilskih in mehaničnih komponent. Komora je delujoča – na dotik občutljiv zaslon se pravilno prižge, prikazuje glavni meni in trenutno delovno temperaturo, kar potrdijo tudi fotografije. Tehnični podatki: Proizvajalec: Vötsch Industrietechnik GmbH Model: VTL 7010 Leto proizvodnje: 2010 Temperaturni razpon: od -70 °C do +180 °C Hitrost ogrevanja/hlajenja: približno 3,5 K/min Hladilno sredstvo: R404A – 0,8 kg R23 – 0,2 kg Napajanje: 230 V AC, 50 Hz Nazivna moč: 3,5 kW Nazivni tok: 15,2 A Delovni tlak: 8 bar Upravljanje prek barvnega zaslona na dotik Delovna komora iz nerjavečega jekla Vrata z opazovalnim oknom Fodpfx Aszi T Nhocdegf Nastavljive notranje police Oznaka CE Uporaba Naprava je idealna za: temperaturna testiranja, raziskave materialov, testiranje elektronike in komponent, raziskave trdnosti, nadzor kakovosti, raziskovalno-razvojna dela. Stanje: rabljena, delujoča, upravljalna plošča deluje pravilno, notranja komora je čista in dobro vzdrževana, običajne sledi uporabe, prodaja se v stanju, kot je prikazano na fotografijah. V kompletu: klimatska komora Vötsch VTL 7010, 2 perforirani polici, vgrajena upravljalna plošča.

Leto izdelave: 2021, obratovalne ure: 4.748 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4748 h For sale is a used temperature test chamber manufactured by Weiss Technik. The chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Meaning of designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Features: stainless steel inner chamber recirculation fans touch control panel (WEBSeason) observation window automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: cooling approx. 6 K/min heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Fgjdpfxjy Dciie Acdsf Nominal current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note the following: The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data, details may vary!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Memmert Tip: UF 450plus Zračni tok: prisilna krožna zračna izmenjava Temperatura Temperaturno območje: +20 °C do +300 °C Delovno območje: najmanj +10 °C nad temperaturo okolice Natančnost nastavitve: – do 99,9 °C: 0,1 °C – od 100 °C naprej: 0,5 °C Temperaturna senzorja: 2× Pt100 (DIN razred A, 4-žični) Notranji prostor in kapaciteta Volumen: 449 litrov Notranje mere (Š × V × G): 1040 × 720 × 600 mm Maksimalno število vložkov: 8 Obremenitev na vložek: 30 kg Fgedoy T Ictspfx Acdof Maksimalna skupna obremenitev: 300 kg Notranjost: nerjaveče jeklo, ogrevanje po celotnem obodu Zunanje mere in teža Zunanje mere (Š × V × G): cca 1224 × 1247 × 784 mm Neto teža: cca 160 kg Bruto teža: cca 185 kg Električni podatki Napetost: 400 V, trifazno Moč: cca 5800 W Regulacija in upravljanje Krmiljenje: ControlCOCKPIT TwinDISPLAY Regulator: digitalni PID mikroprocesor Timer: 1 minuta do 99 dni Funkcije: SetpointWAIT, HeatBALANCE, kalibracija na 3 temperaturnih točkah Nastavljivi parametri: temperatura, hitrost ventilatorja, loputa za izpušni zrak, časovni programi Prezračevanje Krožna zračna izmenjava: nastavljiva v korakih po 10 % Svež zrak: elektronsko nastavljiv Izpušni zrak: z dušilno loputo Komunikacija Vmesniki: Ethernet, USB Programska oprema: AtmoCONTROL Varnost Omejevalnik temperature (TB), zaščitni razred 1 Nadzornik / omejevalnik temperature (TWW/TWB) izbiren ASF-sistem za nadzor previsoke in prenizke temperature Oprema Vrata iz nerjavečega jekla z dvo-točkovnim zaklepanjem Ohišje iz nerjavečega jekla Tih zračni turbinski ventilator Na zadnji strani vsak po 2 prehoda s premerom cca 12 cm Stanje: rabljeno / used Obseg dobave: (glej sliko) (Spremembe in napake v tehničnih podatkih so možne, podatki so informativni!) Za dodatna vprašanja nas lahko kontaktirate po telefonu.

Stanje: zelo dobro (rabljeno), LDS / CTS Vibration Test System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration test system, including an LDS shaker system, LDS SPA30KCE power amplifier, IMV K2+ vibration controller, and CTS climate chamber. Suitable for combined vibration and climate testing in automotive, aerospace, electronics testing, research & development, materials testing, and industrial quality assurance. The blue overhead/gantry crane visible in the photos is not included in the scope of delivery. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V850-440 LPT 750C Air-cooled electrodynamic shaker. Armature diameter: 440 mm Frequency range: DC – 3000 Hz Resonant frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal payload capacity: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Type: SPA30KCE Class-D high-performance switching amplifier. Input voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. connected load: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Amplifier weight: approx. 550 kg Controller IMV K2+ Vibration Control System Multi-channel vibration controller including Dell Precision PC system. Functions: - Sine - Resonance dwell - Limit control - Random - Sine-on-random - PSD limit control - Shock - Scheduler - System monitor CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: CV-70/1100-5 Year of construction: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% r.h. Rated voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerants: R452A: 6.8 kg R23: 2.1 kg Equipment Combined climate and vibration testing Slip table / mounting table included Fully wired test system Service and maintenance documentation available Slip table: Mounting surface: approx. 760 x 850 mm Thread insert spacing: approx. 100 mm Dimensions / Weight Large industrial plant / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Transport only via suitable heavy-duty freight forwarder. Dimensions, weights, and technical data are partially estimated or not fully known. Condition Used industrial equipment from industrial application. Visual condition as shown in the photos. Inspection and testing by arrangement on site possible. Scope of delivery - LDS V850-440 LPT 750C shaker system - LDS SPA30KCE power amplifier - IMV K2+ vibration controller - Dell Precision PC system - CTS climate chamber CV-70/1100-5 Fgedpfx Acoy Sy Npodof - Slip table / mounting table - Accessories and documents as shown in the photos Not included: Blue overhead crane / gantry crane. Loading by arrangement possible. Commercial sale without warranty. Subject to changes, errors and prior sale.