Klimatska preizkusna komora 350 litrov z vlažnostjo

CTS C -40/350 -40°C /+180°C

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, CLEANROOM – ISO 8 | Requirements for Cleanroom ISO Class 8 | Cleanroom Room Classification ISO 8 | To achieve ISO 8 air cleanliness class in a Cleanroom, a multi-stage air filtration system is typically applied (e.g., G4 pre-filter, F9 filter, H13 final HEPA filter). Airflow within the room is non-unidirectional (the supplied 'clean' air mixes with 'dirty' air present in the room). Air exhaust vents in an ISO 8 room are installed in the walls. The required number of air changes per hour depends on the activities carried out and the number of personnel present, but a target could be 10–40 air changes per hour. In ISO 8 class, personnel are often present continuously. Employees may wear standard work clothing, and visitors disposable gowns. It is recommended to maintain a minimum positive room pressure relative to adjacent zones at 5–10 Pa. Requirements for equipment and materials intended for Cleanroom ISO 8 (maximum average amount of particles released, assuming 100 samples; measurement according to ISO 14644-14 in a class at least one better than required for device application; number of particles/m3). Detailed description available in photos. Technical drawings included in the images. Ventilation Description: The aim of the ventilation installation was to achieve the following air parameters in the Cleanroom. The structure was built using the GBD PHARMA 2000 system, meeting all requirements for ‘cleanrooms’ in the highest air cleanliness classes. Installation parameters: a. Air cleanliness – ISO 8. b. Temperature: 19–23°C c. Maximum humidity: 38%. a. To ensure the required cleanliness of supplied air, a DOSPEL ventilation unit with a maximum capacity of V = 3500 m3/h [up to 15 air changes per hour] was used. The ventilation unit is equipped with bag filters: pre-filter FK EU5/EC2 and secondary FK-EU9/EC2. Additionally, EUFILTER HEPA 11 filters were used in the ceiling-mounted supply diffusers. Technical data sheets are attached in section H6. As a result, at a measured output of 3264 m3/h, ISO 7 [Class 'C'] room cleanliness was achieved at rest, and thus ISO 8 [Class 'D'] in operation. b. The temperature range of 19–23°C can be easily maintained with an enlarged cooler and aggregate, even with 25% fresh air intake. c. To achieve specified conditions during summer, at high ambient temperatures of around 30°C and humidity of around 80%, a 31.4 kW freon cooler and a 33.5 kW chiller were used. The chiller, made by FUJITSU, was supplied by Klimatherm Gdańsk. The room features automated positive pressure regulation compared to external pressure—differential pressure at the doors: 15 Pa. Ventilation automation allows for an 'economy' mode, where the system operates in a closed loop and maintains a pressure differential of 15 Pa. Dkjdpfxoq H H Rue Abgjp Technical data attached in the images.

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, ERSA VERSAFLOW 4/55 2Modul S021B-23A0548D rabljeno 2023 cena: 190.000 € (transportni trak ni vključen) Dkodpfx Abjx Tgvlegjp Specifikacije na zahtevo.

Stanje: rabljeno, Leto izdelave: 2020, Pralni stroj za zabojnike Storm -Moč: 4,31 kW -Moč črpalke: 4 kW -Zmogljivost: do 240 kosov/uro -Z tehnično dokumentacijo -Parno napajanje Dkjdpfxjxy R Nte Abgjp -Zunanje dimenzije: 3600 x 1050 x 1620 mm -Leto izdelave: 2020 -Teža: 325 kg -Stanje: rabljeno, zelo dobro, pripravljeno za uporabo

Leto izdelave: 2021, stanje: rabljeno, Enota v dobrem stanju. Cena in specifikacije na zahtevo! Dkjdpfxjy Eyp Ae Abgsp

Leto izdelave: 2021, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 37022, We offer this as-new Tagarno ZIP Microscope + LCD Monitor, year of manufacture 2021. Manufacturer: Tagarno Model: ZIP Year of manufacture: 2021 Condition: As new Category ID: 689 Type: Microscope + LCD Monitor Dkodsym Suljpfx Abgjp Professional digital inspection system for quality control and PCB assembly. A high-quality digital microscope from TAGARNO, model ZIP, is for sale. The device is ideal for precise inspection, repair, and documentation in electronics manufacturing or precision engineering. Technical details and highlights: * Resolution: Full HD (1080p / 60fps) for sharp, lag-free images. * Zoom: 30x optical zoom (plus digital zoom). * Working distance: Large free space under the camera (approx. 250 mm), ideal for soldering work. * Interface: HDMI output for direct connection to a monitor (no PC required). * Condition: Technically and visually perfect, very few operating hours. Scope of delivery: * TAGARNO ZIP camera head * Original TAGARNO stand / frame (column) * Power supply unit and HDMI cable Multiple units available / quantity discount possible when purchasing more units. If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WK3-340/40 Dsdjziyygjpfx Abgjkp Weiss Climate Test Chamber, Air-Cooled Temperature Testing Volume: 335 liters Test Chamber Dimensions: Internal chamber: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature: -42°C Maximum temperature: +180°C Temperature change rate, cooling: 4 K/min Temperature change rate, heating: 3.2 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature uniformity spatial: ±0.5 to ±1.5 K Climatic Testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature uniformity spatial: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % RH Halogen lamp: 2 x 24V, 50W Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: Approx. 515 kg For your safety as a buyer, please note the following information! The following points are carried out on all chambers we offer before sale: 1. Functional inspection and replacement of necessary components 2. If necessary, new charge with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a climate test chamber. Water-cooled Test chamber volume: 350 liters Test chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% r.h. Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 to ±0.3 K over time Humidity deviation: ±1% to ±2% r.h. over time up to 90% r.h., max. ±1% to 3% r.h. over time above 90% r.h. Electrical connection: 400V +6-10 %, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg Dsdpfoziyw Esx Abgekp Type: CS-70/350 For your safety as a buyer, please note the following information! The following procedures are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Technical data and specifications are subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Here we are offering a Weiss climate test chamber. Weiss Climate Test Chamber, water-cooled (Refrigerant converted to R-452A) Temperature Testing Volume: 335 liters Test chamber dimensions: Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature: –42°C Maximum temperature: +180°C Temperature change rate, cooling: 4 K/min Temperature change rate, heating: 3.2 K/min Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Climatic testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3 % r.h. Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-452A Model: WK3-340/40 Weight: approx. 515 kg For your safety as a buyer, please note the following information! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant Dkjdpfezgavvox Abgjp 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data may be subject to change and errors!) For further questions, feel free to contact us by phone.

Leto izdelave: 2025, stanje: skoraj kot novo (rabljeno), Binder MKF 720 E5 climate chamber from 2025. The chamber is unused, brand new, with a 3-year spare parts warranty. The Binder MKF 720 E5 is a professional climate/environmental chamber designed for stability studies, as well as temperature and climate tests in compliance with DIN and IEC standards. The E5 series represents the latest generation of Binder equipment, featuring a touchscreen control panel and advanced programmable controls. Key features: * Temperature range: -40°C to +180°C * Humidity range: 10–98% RH * Chamber capacity: approx. 734 liters * APT.line™ preheating chamber technology * Very fast temperature change rates * Humidity control via capacitive sensor plus steam humidification Dksdpfxjy Sg Nve Abgjp * Binder E5 touchscreen controller with segment and time programming * Built-in data logger with USB data export * Ethernet interface * Heated inspection window with LED lighting * Automatic water supply and drainage management * Interior chamber made of stainless steel * Compressor cooling * Refrigerant: R-452A