Cronosstech Hpb Nc 60-2100 nakup rabljenega (26.625)

Stanje: novo, Leto izdelave: 2026, moč: 7,5 kW (10,20 KM), stiskalna sila: 60 t, hod: 160 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 90 mm/s, globina grla: 320 mm, dolžina plošče bata: 2.100 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, Standard Equipment Stroke: 160 mm Daylight Opening: 380 mm Throat Depth: 320 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Machine Features - Dual-cylinder upper beam bending system - Rigid steel frame and upper beam construction for high static and dynamic stiffness - Upper beam movement supported by fiber slide bearings - High-strength balance shaft and eccentric bearing system ensuring parallelism - Mechanically controlled stroke system within the cylinder for motorized angle adjustment - Large working area suitable for various tool sets - Tonnage adjustment and bottom dead point stop via NC control unit - Hydraulic safety system against overpressure - Dual-speed working system: rapid approach, bending, and fast return - CE-compliant multifunctional foot pedal and emergency stop system - Compact hydraulic power unit with HAWE or Rexroth components - Remote service support with Siemens, Pizzato, and Balluff electrical equipment - LEUZE safety system and learning mode - NC control unit stores 500 programs with 200 lines per program - Easy program upload and download via USB - Standard upper and lower tool sets - NC-controlled motorized X-axis backgauge (600 mm) - Programmable and linear-guide backgauge system - 0.2 mm positioning accuracy - Motorized Y-axis angle adjustment - Movable control panel - Linear-guided front support arms - Lower die centering and clamping bolts - Programmable precise backgauge retract function Optional Equipment - Motorized R-axis - Special bending dies - Special pedal system for dual hand and foot operation - DSP or FIESSLER safety systems - Extended backgauge depth - Additional backgauge fingers - Additional front support arms Kdsdpfx Abezcmbfjxjn - Manual crowning system - Motorized crowning system Technical Specifications Bending Force: 60 Tons Maximum Bending Capacity: 4 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Stroke: 160 mm Bending Speed: 10 mm/s Rapid Approach Speed: 90 mm/s Throat Depth: 320 mm Daylight Opening: 380 mm Table Width: 100 mm Table Height: 845 mm Main Motor Power: 7.5 kW X-Axis Motor: 0.75 kW Y-Axis Motor: 0.37 kW Optional R-Axis Motor: 0.25 kW Backgauge Depth: 600 mm Oil Tank Capacity: 120 L Machine Length: 2450 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 4,340 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Stanje: novo, Leto izdelave: 2026, moč: 5,5 kW (7,48 KM), stiskalna sila: 60 t, hod: 210 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 135 mm/s, globina grla: 410 mm, dolžina plošče bata: 2.100 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, HPB B60-2100 – 60 Ton x 2100 mm CNC Hydraulic Press Brake The HPB B60-2100 CNC Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, is engineered for precise sheet metal bending operations with 60 tons of bending force and a bending length of 2100 mm. Standard Features - Stroke: 260 mm - Open Height (Daylight): 465 mm - Throat Depth: 410 mm - Bending Length: 2100 mm - Distance Between Uprights: 1600 mm - ESA S630 CNC Control Unit (3-4 Axis) - 10” 2D touchscreen graphical interface - Manual bend sequence and collision check calculation - Angle compensation calculation (Crowning) - Angle measurement and correction - 2D drawing support - 2 USB ports - Offline programming software - CRONOSSTECH Servo Motorized X-Axis Backgauge System - X-axis travel distance: 750 mm - Speed: 250 mm/sec - Repeatability: ±0.05 mm - Manual R-axis movement: 250 mm - Steel frame construction - Hardened ball screw - Hardened linear guide system - Optional 1000 mm X-axis Backgauge Fingers - 2 pieces - Flat type - 3 positions (10 mm / 20 mm / 30 mm) - Manual Z-axis movement - Anti-deflection structure for sheet support European Type Quick Tool Clamping System (Promecam E7) - Fast tool change - Safe operation - Practical, time-saving design CRONOSSTECH Special Narrow Lower Bed - 70 mm or 90 mm lower bed - T-slot can be applied according to the tools Standard Top Tool ES1260 - Tool height: 67 mm - Tool angle: 85° - Radius: 0.8 mm - Material: C45 - Maximum capacity: 100 Tons/Meter - Amada compatible Standard Bottom Tool ES2067 - 4-groove V opening (16-22-35-50 mm) - Tool height: 60 mm - Tool angle: 85° - Material: C45 - Maximum capacity: 80 Tons/Meter - Amada compatible B Series Open Frame Design - Black plexiglass protection panels - Wide field of view - Professional appearance - Ergonomic design Additional Equipment - Single foot pedal system (P2) - GIVI linear scales - LED illumination on the top beam - Electrical panel to VDE standards - Schneider or Siemens electrical components - Hoerbiger (HAWE) hydraulic block - Eckerle hydraulic pump - Siemens driver - Energy-saving Standby function Front Support Arms - 2 standard sliding front support arms - Height adjustable - Ruler measurement system - Operator support Optional Features - Servo Motorized X + R-Axis Backgauge System - Servo motorized X and R axis movement Kjdezbrfaspfx Abxodn - X-axis travel: 750 mm (expandable up to 1000 mm) - Repeatability: ±0.05 mm AKAS II Front Safety Laser System + Rear Light Barriers - Finger protection system - Laser-based safety system - Enhances operator safety - CE conformity - Maximum working distance: 4.3 meters Delem DA53Tx CNC Control Unit (15” Touchscreen) - 15” color touchscreen - 2D product drawing and simulation - Angle compensation calculation - Angle measurement and correction - USB data transfer - Data backup - Offline profile-TL programming - Remote access and fault management Technical Specifications - Bending Force: 60 Ton - Bending Length: 2100 mm - Distance Between Uprights: 1600 mm - Stroke: 260 mm - Open Height (Daylight): 465 mm - Throat Depth: 410 mm - Table Height: 870 mm - Machine Length: 3660 mm - Machine Width: 2175 mm - Machine Height: 2820 mm - Approach Speed: 160 mm/sec - Return Speed: 135 mm/sec - Bending Speed: 10 mm/sec - Oil Tank Capacity: 170 L - Machine Weight: 4290 kg - Main Motor Power: 5.5 kW - Backgauge X-Axis Speed: 300 mm/sec - Backgauge R-Axis Speed: 250 mm/sec This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, moč: 3 kW (4,08 KM), stiskalna sila: 30 t, hod: 150 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 70 mm/s, globina grla: 255 mm, dolžina plošče bata: 1.270 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, Standard Equipment Stroke: 150 mm Daylight (Lower–Upper Beam Gap): 265 mm Throat Depth: 255 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Machine Features - Double-cylinder upper beam bending system - Steel machine frame construction ensures high static and dynamic rigidity - Upper beam movement supported by fiber slide bearings - High-strength balance shaft and eccentric bearing system support parallel movement - Mechanically adjustable stroke system within cylinder allows motor-controlled angle adjustment - Large opening and high stroke suitable for various die applications Kdsdpozcl S Nofx Abxen - Easy tonnage setting and bottom dead center stop via NC control - Hydraulic safety system against overpressure - Dual-speed operation with modes for rapid descent, bending, and rapid return - Multi-functional foot pedal with emergency stop, CE-compliant - Compact, top-mounted hydraulic power unit with HAWE or Rexroth components - Siemens, Pizzato, and Balluff electrical components - LEUZE safety system and learning mode - NC control unit with 500 program memory capacity, up to 200 lines per program - Program transfer via USB - Standard upper and lower die set - NC controlled motorized X-axis backgauge (500 mm) - Linear guide rear stopper system - 0.2 mm positioning accuracy - Motorized Y-axis angle adjustment - Movable control panel - Front support arms with linear guides - Lower die centering bolts - Programmable precise backgauge retreat function Optional Equipment - Motorized R axis - Custom bending dies - Special pedal system with dual hand + foot control - DSP or Fiessler safety systems - Extended backgauge travel distance - Additional backgauge fingers - Additional front support arm - Manual crowning system - Motorized crowning system Technical Specifications Bending Force: 30 Tons Maximum Bending Capacity: 4 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Stroke: 150 mm Bending Speed: 10 mm/s Rapid Descent Speed: 70 mm/s Throat Depth: 255 mm Daylight (Lower–Upper Beam Gap): 265 mm Table Width: 130 mm Table Height: 830 mm Main Motor Power: 3 kW X Axis Motor: 0.55 kW Y Axis Motor: 0.18 kW Optional R Axis Motor: 0.25 kW Backgauge Travel: 500 mm Oil Tank Capacity: 90 L Machine Length: 1780 mm Machine Width: 1375 mm Machine Height: 2160 mm Machine Weight: 1700 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Stanje: novo, Leto izdelave: 2026, moč: 5,5 kW (7,48 KM), stiskalna sila: 100 t, hod: 210 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 135 mm/s, globina grla: 40 mm, dolžina plošče bata: 2.100 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, HPB B100-2100 – 100 Ton x 2100 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Daylight (Lower–Upper Jaw Opening): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance Between Uprights: 1600 mm ESA S630 CNC Control Unit (3-4 Axis) 10” 2D Touch Graphic Display Manual Bend Sequence and Collision Control Calculation Angle Correction Calculation (Crowning) Angle Measurement and Correction 2D Drawing Support 2x USB Ports Offline Programming Software CT-BEND Servo Motorized X Axis Backgauge System X-axis Travel: 750 mm Speed: 250 mm/sec Precision: ±0.05 mm Manual R-axis Travel: 250 mm Heavy-duty Steel Frame Construction Hardened Ball Screw Hardened Linear Guideway System Optional 1000 mm X Axis Backgauge Fingers 2 pieces Flat Type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis Movement Sheet Sag Prevention Structure European Type Quick Die Clamping System (Promecam E7) Quick Tool Change Safe Operation Practical and Time-saving Design CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm Lower Table T-slot can be applied according to tooling requirements Standard Upper Die ES1260 Die Height: 67 mm Die Angle: 85° Radius: 0.8 mm Material: C45 Maximum Capacity: 100 Ton/Meter Amada Compatible Standard Lower Die ES2067 4-groove V Openings (16-22-35-50 mm) Die Height: 60 mm Die Angle: 85° Material: C45 Maximum Capacity: 80 Ton/Meter Amada Compatible B Series Open Cabin Design Black Plexiglass Safety Panels Wide Viewing Area Professional Appearance Ergonomic Design Additional Equipment Single Pedal System (P2) GIVI Linear Scales Upper Beam LED Lighting VDE-standard Electrical Panel Schneider or Siemens Electrical Components Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Siemens Drive Energy-saving Standby Function Front Support Arms 2 Standard Sliding Front Support Arms Height Adjustable Ruler Measurement System Operator Assistance Optional Features CT-BEND Servo Motorized X + R Axis Backgauge System Servo Motorized X and R Axis Movement X Axis Travel: 750 mm Precision: ±0.05 mm X Axis Extendable up to 1000 mm AKAS II Front Safety Laser System + Rear Light Barriers Finger Protection System Laser-based Safety System Enhanced Operator Safety CE Compliance Maximum Operating Distance: 4.3 meters Delem DA66T CNC Control Unit (17” Touchscreen) 17” 2D Touch Graphic Display 2D Drawing and 3D Viewing / Product Simulation User-friendly Interface 1 GB Hard Drive Automatic Bend Sequence and Collision Control Calculation Angle Correction Calculation (Crowning) Angle Measurement and Correction Windows-based Operating System 2x USB Ports Data Backup Offline Profile-TL Programming Feature Technical Specifications Bending Force: 100 Ton Bending Length: 2100 mm Distance Between Uprights: 1600 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/sec Return Speed: 135 mm/sec Bending Speed: 10 mm/sec Oil Tank Capacity: 170 L Machine Weight: 5000 kg Main Motor Power: 5.5 kW Backgauge X Axis Speed: 300 mm/sec Backgauge R Axis Speed: 250 mm/sec This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷 Kedjzbrf Topfx Abxsdn

Stanje: novo, Leto izdelave: 2026, moč: 5,5 kW (7,48 KM), stiskalna sila: 40 t, hod: 160 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 90 mm/s, globina grla: 320 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, HPB NC 40-1550 – 40 x 1550 mm Ton NC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB NC 40-1550 Hydraulic Press Brake is engineered for precision sheet metal bending applications, offering a bending force of 40 tons and a bending length of 1550 mm. Thanks to its compact design, NC-controlled axes, high-rigidity steel frame, and user-friendly control system, it provides an efficient solution for workshops, metal fabrication companies, and industrial manufacturers. Standard Features: - Stroke: 160 mm - Daylight Opening: 380 mm - Throat Depth: 320 mm - Bending Length: 1550 mm Kodpfszbq U Hsx Abxodn - Distance Between Columns: 1260 mm - Double cylinder upper beam structure - Steel frame and upper beam for high static and dynamic rigidity - Upper beam system with adjustable fiber slide support - High-strength balancing shaft and eccentric bearing system for parallelism support - Mechanically integrated stroke system with motorized angle adjustment - Wide stroke and daylight clearance suitable for diverse tooling - Easy tonnage and bottom dead center adjustment via NC control - Hydraulic safety system against overpressure - Dual-speed operating system (free fall, bending, rapid return) - Multi-functional foot pedal with emergency stop, CE compliant - Top-mounted hydraulic power unit with HAWE or REXROTH components - SIEMENS, PIZZATO, and BALLUFF electrical equipment - LEUZE safety system and learning mode - NC control unit with memory for 500 programs and 200 steps per program - USB data upload and backup capability - Standard punch and die set - NC-controlled, motorized X axis back gauge system - 500 mm travel distance - 0.2 mm positioning accuracy - Motorized Y axis angle adjustment - Movable control panel - Front support arms with linear guides - Lower die centering and clamping bolts - Programmable precision back-off function Optional Features: - Motorized R axis - Special bending tools and dies - Special dual hand/foot control pedal system - DSP or FIESSLER safety systems - Extended back gauge system - Additional back gauge fingers - Additional front support arm - Manual crowning system - Motorized crowning system Technical Specifications: - Bending Force: 40 Tons - Bending Capacity*: 4 mm - Working Length: 1550 mm - Distance Between Columns: 1260 mm - Stroke: 160 mm - Bending Speed: 10 mm/s - Rapid Descent Speed: 90 mm/s - Throat Depth: 320 mm - Daylight Opening: 380 mm - Table Width: 100 mm - Lower Table Height: 845 mm - Main Motor Power: 5.5 kW - X Axis Motor Power: 0.75 kW - Y Axis Motor Power: 0.37 kW - R Axis Motor Power (Optional): 0.25 kW - Back Gauge Travel: 600 mm - Oil Tank Capacity: 120 L - Machine Length: 2000 mm - Machine Width: 1600 mm - Machine Height: 2235 mm - Machine Weight: 3450 kg This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Stanje: novo, Leto izdelave: 2026, moč: 4 kW (5,44 KM), stiskalna sila: 60 t, hod: 210 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 120 mm/s, globina grla: 410 mm, dolžina plošče bata: 1.250 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, HPB A60-1250 – 60 Ton x 1250 mm CNC Hydraulic Press Brake The HPB A60-1250 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, has been engineered for precision sheet metal bending applications, featuring a 60-ton bending force and a 1250 mm bending length. Equipped with the ESA S630 CNC control unit, servo motorized backgauge system, compact frame construction, and professional tooling, it delivers high accuracy and efficiency for workshops, metalworking companies, and industrial manufacturers. Standard Features - Stroke: 210 mm - Daylight (Open Height): 415 mm - Throat Depth: 410 mm - Bending Length: 1250 mm - Distance Between Columns: 1100 mm - ESA S630 CNC Control Unit (3-4 Axis) - 10” 2D touch graphic display - Manual bend sequence and collision control calculation - Angle correction calculation (Crowning) - Angle measurement and correction - 2D drawing support - 2 USB ports - Offline programming software - CT-BEND Servo Motorized X Axis Backgauge System - X axis travel: 750 mm - Speed: 130 mm/s Kjdezbyu Njpfx Abxjdn - Accuracy: ±0.10 mm - Manual R axis travel: 190 mm - Steel frame construction - Hardened ball screw - Hardened linear guideway system - Optional: 1000 mm X axis Backgauge Fingers - Quantity: 2 - Flat type - 3-position (10 mm / 20 mm / 30 mm) - Manual Z axis movement - Anti-deflection support structure European Type Manual Promecam Upper Tool Holder E7 - Quick tool change - Safe operation - Safety structure to prevent tool drop CRONOSSTECH Special Narrow Bottom Table - 70 mm or 90 mm bottom table - Optional T-slot upon request Standard Upper Die ES1260 - Die height: 67 mm - Die angle: 85° - Radius: 0.8 mm - Material: C45 - Max. capacity: 100 Ton/Meter - Amada compatible Standard Lower Die ES2067 - 4-way V opening (16-22-35-50 mm) - Die height: 60 mm - Die angle: 85° - Material: C45 - Max. capacity: 80 Ton/Meter - Amada compatible A Series Open Frame Design - CRONOSSTECH premium open frame - Wide viewing angle - Ergonomic design - Professional appearance Additional Equipment - Single pedal system (P2) - GIVI linear scales - Overhead LED lighting - Electrical panel to VDE standards - Schneider or Siemens electric components - Hoerbiger (HAWE) hydraulic block - Eckerle hydraulic pump - Energy-saving standby function Front Support Arms - 2 standard sliding front support arms - Height adjustable - Ruler measuring system - Operator support Optional Features - AKAS II Front Safety Laser System + PLC + Rear Light Barriers - Finger protection system - Laser-based safety system - Enhances operator safety - CE compliance - Max. working distance: 4.3 meters Technical Specifications - Bending Force: 60 Ton - Bending Length: 1250 mm - Distance Between Columns: 1100 mm - Stroke: 210 mm - Daylight (Open Height): 465 mm - Throat Depth: 410 mm - Table Height: 885 mm - Machine Length: 3060 mm - Machine Width: 2195 mm - Machine Height: 2730 mm - Approach Speed: 150 mm/s - Return Speed: 120 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 95 L - Machine Weight: 3400 kg - Main Motor Power: 4 kW - Backgauge X Axis Speed: 300 mm/s - Backgauge R Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Stanje: novo, Leto izdelave: 2026, moč: 7,5 kW (10,20 KM), stiskalna sila: 100 t, hod: 260 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 135 mm/s, globina grla: 410 mm, dolžina plošče bata: 2.600 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, HPB B100-2600 – 100 Ton x 2600 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Open Height (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 2600 mm Distance Between Uprights: 2150 mm ESA S830 CNC Control Unit (3-4 Axis) 10” 2D touch graphic screen Manual bend sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Backgauge System X-axis travel distance: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis travel: 250 mm Heavy-duty steel frame construction Hardened ball screw Hardened linear guide system Optional 1000 mm X-axis Backgauge Fingers 2 pieces Flat type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure prevents sheet sagging European Type Quick Tool Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving structure CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slot can be applied depending on dies used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Metre Compatible with Amada Standard Lower Die ES2067 4-groove V opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Metre Compatible with Amada B Series Open Frame Design Black plexiglass safety panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical cabinet built to VDE standards Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height-adjustable Scale measurement system Supports the operator Optional Features CT-BEND Servo Motorized X + R Axis Backgauge System Servo-driven X and R axis movement X-axis travel distance: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm CNC Controlled Motorized Crowning System MVD wedge and G.E.C. motor system Automatic calculation by CNC Faster setup time Higher bending accuracy Longer machine life AKAS (FPSC) Front Safety Laser System + Rear Light Curtain Laser-based finger protection system Enhances operator safety Fast detection and response time CE compliant Maximum working distance: 4.3 meters Technical Specifications Bending Force: 100 Ton Bending Length: 2600 mm Distance Between Uprights: 2150 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 4220 mm Machine Width: 2230 mm Machine Height: 2950 mm Approach Speed: 200 mm/s Pressing Speed: 10 mm/s Return Speed: 135 mm/s Oil Tank Capacity: 170 L Machine Weight: 6430 kg Main Motor Power: 7.5 kW Backgauge X-Axis Speed: 300 mm/s Backgauge R-Axis Speed: 250 mm/s Ksdpfjzbyt Sox Abxodn This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Stanje: novo, Leto izdelave: 2026, moč: 15 kW (20,39 KM), stiskalna sila: 175 t, hod: 260 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 130 mm/s, globina grla: 410 mm, dolžina plošče bata: 3.700 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, HPB B175-3700 – 175 Ton x 3700 mm CNC Hydraulic Press Brake The HPB B175-3700 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is engineered for precise and repeatable sheet metal bending processes with a bending force of 175 tons and a bending length of 3700 mm. Standard Features - Stroke: 260 mm - Daylight (open height): 465 mm - Throat Depth: 410 mm - Bending Length: 3700 mm - Distance Between Columns: 3200 mm - ESA S830 CNC Control Unit - 10” 2D Touchscreen Display - Manual bending sequence and collision detection - Automatic crowning calculation - Angle measurement and correction - 2D drawing capability - 2 USB ports - Offline programming software CT-BEND Servo Motorized Backgauge - X-axis travel: 750 mm - Speed: 250 mm/s - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Hardened ball screw - Linear guide system - Optional X-axis: 1000 mm Tooling System - 2 rear gauge fingers - European-type Promecam quick clamping system - CRONOSSTECH custom narrow lower table - Eurostamp ES1260 upper tool - Eurostamp ES2067 lower tool - Compatible with Amada tool system Standard Equipment - B Series open frame design - GIVI linear encoders - LED lighting - VDE electrical panel - Schneider or Siemens electrical components - HAWE hydraulic block Kodpfx Abozb Inkexodn - Eckerle pump - Siemens drive - Single pedal system - Energy-saving standby function - 2 adjustable front support arms Optional Features - CT-BEND X+R servo motorized backgauge - AKAS II front safety laser system - PLC safety module - Rear light curtains - Delem DA53Tx CNC control unit - CNC-controlled motorized crowning system - X-axis extension to 1000 mm Technical Specifications - Bending Force: 175 Ton - Bending Length: 3700 mm - Distance Between Columns: 3200 mm - Stroke: 260 mm - Daylight (open height): 465 mm - Throat Depth: 410 mm - Table Height: 955 mm - Machine Length: 5300 mm - Machine Width: 2430 mm - Machine Height: 2990 mm - Approach Speed: 180 mm/s - Return Speed: 130 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 180 L - Weight: 10,500 kg - Main Motor Power: 15 kW - X-axis Speed: 300 mm/s - R-axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. Country of origin: Turkey. 🇹🇷

Stanje: novo, Leto izdelave: 2026, moč: 22 kW (29,91 KM), stiskalna sila: 220 t, hod: 260 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 110 mm/s, globina grla: 410 mm, dolžina plošče bata: 6.100 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, HPB B220-6100 – 220 Ton x 6100 mm CNC Hydraulic Press Brake The HPB B220-6100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for the precise, powerful, and repeatable bending of long sheet metal parts, featuring a bending force of 220 tons and a bending length of 6100 mm. It is suitable for heavy industry, steel construction, energy, machinery manufacturing, and metalworking applications. The machine offers high efficiency with an ESA S630 CNC control unit, servo-driven backgauge system, European-style tooling clamping system, robust frame construction, and professional equipment. Standard Features - Stroke: 260 mm Kdedpfx Aszbyvtsbxen - Open Height (Daylight): 465 mm - Throat Depth: 410 mm - Bending Length: 6100 mm - Distance Between Uprights: 5100 mm - ESA S630 CNC Control Unit - 10" 2D touch graphic display - Manual bend sequence & collision calculation - Angle correction calculation - Angle measurement and correction - 2D drawing - 2 USB ports - Offline software - CT-BEND Servo Motorized X-Axis Backgauge - X-axis travel: 750 mm - X-axis speed: 250 mm/s - Accuracy: ±0.05 mm - Manual R-axis travel: 250 mm - Heavy-duty steel frame - Hardened ballscrew - Hardened linear guides - Optional X-axis travel: up to 1000 mm Tooling & Backgauge System - 2 straight type, 3-stage backgauge fingers - Manual Z-axis adjustment - European quick-release Promecam upper tool holder - Special narrow lower table by CRONOSSTECH - Standard upper tool ES1260, H: 67 mm, 85°, R: 0.8 mm - Standard lower die ES2067, 60 x 60 mm, V: 16-22-35-50 mm - Amada compatible tooling system Other Standard Equipment - B-series open-frame design - Black plexiglass safety panels - Single pedal control - GIVI linear encoders - LED illumination on upper beam - VDE electrical panel - Schneider or Siemens electrical components - Hoerbiger / HAWE hydraulic block - Eckerle pump - Siemens drive - Energy-saving standby function - 2 standard sliding front support arms Optional Features - AKAS II front safety laser system + PLC + rear light barriers - Delem DA53Tx 15” CNC control unit - Delem DA58Tx 18.5” CNC control unit - CNC-controlled motorized crowning system - X-axis extension up to 1000 mm - Additional front support arms - Additional backgauge fingers - Custom bending tools Technical Specifications - Bending Force: 220 tons - Bending Length: 6100 mm - Distance Between Uprights: 5100 mm - Stroke: 260 mm - Open Height (Daylight): 465 mm - Throat Depth: 410 mm - Table Height: 1060 mm - Machine Length: 7560 mm - Machine Width: 2570 mm - Machine Height: 3440 mm - Approach Speed: 150 mm/s - Return Speed: 110 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 290 L - Machine Weight: 20,000 kg - Main Motor Power: 22 kW - Backgauge X-axis Speed: 300 mm/s - Backgauge R-axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. Country of origin: Turkey.

Stanje: novo, Leto izdelave: 2026, moč: 22 kW (29,91 KM), stiskalna sila: 270 t, hod: 260 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 120 mm/s, globina grla: 410 mm, dolžina plošče bata: 3.100 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, HPB B270-3100 – 270 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B270-3100 CNC Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, has been developed for heavy industry, steel construction, machinery manufacturing, and precision sheet metal forming applications with its 270-ton bending force and 3100 mm bending length. Standard Features - Stroke: 260 mm - Daylight (Open Height): 465 mm - Throat Depth: 410 mm - Bending Length: 3100 mm - ESA S830 CNC Control Unit (3-4 Axis) - 10” 2D touchscreen graphic display - Manual bend sequence and collision control calculation - Automatic crowning compensation (deflection calculation) - Angle measurement and adjustment - 2D drawing support - 2 USB ports - Offline programming software - Servo-motorized X-axis Backgauge System - X-axis travel: 750 mm - Speed: 250 mm/sec - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Heavy-duty steel frame construction - Hardened ball screw - Hardened linear guide system - Optional 1000 mm X-axis Backgauge Fingers - 2 pieces - Flat type - 3-stage (10 mm / 20 mm / 30 mm) - Manual Z-axis movement - Design prevents sheet sagging European Type Quick Tool Clamping System (Promecam Type) - Quick tool change - Secure locking system - User-friendly operation European Type Narrow Lower Table - 70 mm or 90 mm special lower table - T-slot can be applied according to tooling needs Standard Upper Tool ES1260 - Tool height: 67 mm Ksdpfezbrc Sox Abxsdn - Tool angle: 85° - Radius: 0.8 mm - Material: C45 - Max. capacity: 100 Ton/Meter - Amada compatible Standard Lower Tool ES2067 - 4-channel V opening (16-22-35-50 mm) - Tool height: 60 mm - Tool angle: 85° - Material: C45 - Max. capacity: 80 Ton/Meter - Amada compatible B-Series Open Frame Design - Black plexiglass safety panels - Wide viewing area - Professional appearance - Ergonomic design Additional Equipment - Single pedal system (P2) - GIVI linear rulers - Upper beam LED lighting - Electrical panel to VDE standards - Schneider or Siemens electrical components - High-quality hydraulic block system - Eckerle hydraulic pump - Siemens main drive - Energy-saving standby function Front Support Arms - 2 standard sliding front support arms - Height adjustable - Ruler measurement system Optional Features - Servo-motorized X + R Axis Backgauge System - Servo-controlled X-axis movement - X-axis travel: 750 mm - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Hardened linear guides and ball screw system - X-axis extendable up to 1000 mm CNC-Controlled Motorized Crowning System - Motorized wedge system - Automatic calculation by CNC - Faster adjustment time - Higher bending accuracy - Increased machine lifetime Front Safety Laser System + Rear Light Curtains - Laser-based finger protection system - Enhances operator safety - Fast detection and response time - Max. working distance: 4.3 meters Technical Specifications - Bending Force: 270 Ton - Bending Length: 3100 mm - Distance Between Columns: 2600 mm - Stroke: 260 mm - Daylight: 465 mm - Throat Depth: 410 mm - Table Height: 960 mm - Machine Length: 4840 mm - Machine Width: 2500 mm - Machine Height: 3040 mm - Approach Speed: 150 mm/sec - Return Speed: 120 mm/sec - Bending Speed: 10 mm/sec - Oil Tank Capacity: 290 L - Machine Weight: 12,300 kg - Main Motor Power: 22 kW - Backgauge X Axis Speed: 300 mm/sec - Backgauge R Axis Speed: 250 mm/sec This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Stanje: novo, Leto izdelave: 2026, moč: 4 kW (5,44 KM), stiskalna sila: 40 t, hod: 210 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 120 mm/s, globina grla: 410 mm, dolžina plošče bata: 1.250 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, HPB A40-1250 – 40 Ton x 1250 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB A40-1250 CNC Hydraulic Press Brake is engineered for precise sheet metal bending applications, featuring 40 tons of bending force and a bending length of 1250 mm. With the ESA S630 CNC control unit, servo-driven backgauge system, compact body design, and professional tooling equipment, it provides an efficient solution for workshops, metal fabrication companies, and industrial manufacturers. Standard Features • Stroke: 210 mm • Lower – Upper Jaw Opening (Daylight): 465 mm • Throat Depth: 410 mm • Bending Length: 1250 mm • Distance Between Uprights: 1100 mm • ESA S630 CNC Control Unit (3-4 Axis) • 10” 2D graphical touchscreen • Manual bend sequence and collision check calculation • Angle correction calculation (crowning) • Angle measurement and correction • 2D drawing support • 2 USB ports • Offline programming software • CRONOSS Servo Motorized X Axis Backgauge System – X axis travel: 750 mm – Speed: 130 mm/s – Accuracy: ±0.10 mm – Manual R axis travel: 190 mm • Steel frame construction • Hardened ball screw • Linear guide system • Optional 1000 mm X axis Backgauge Fingers • 2 pieces • Flat type • 3-step adjustable (10 mm / 20 mm / 30 mm) • Manual Z axis movement European Type Manual Promecam Upper Tool Holder E7 • Quick tool change • Safe operation • Fall-prevention design for punches and dies CRONOSS Special Narrow Lower Table • 70 mm or 90 mm lower table • Optional T-groove as per request Standard Upper Tool ES1260 • Punch height: 67 mm • Punch angle: 85° • Radius: 0.8 mm • Material: C45 • Max. capacity: 100 Tons/Meter Standard Lower Die ES2067 • 4-channel V-opening (16-22-35-50 mm) • Die angle: 85° • Die height: 60 mm • Material: C45 • Max. capacity: 80 Tons/Meter A Series Open Cabin Cladding • CRONOSS Premium open cabin • Wide field of view • Ergonomic design • Professional appearance Single Pedal System (P2) Encoder Linear Scales Upper Beam LED Lighting VDE Electrical Panel Schneider or Siemens Electrical Components Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Energy-Saving Standby Function 2 Sliding Front Support Arms • Height adjustable • Integrated ruler measurement system • Operator assistance system Kedpfozbrcrox Abxodn Optional Features AKAS II Front Safety Laser System + Rear Light Barriers • AKAS® II laser safety system • Finger guard system • Laser protection at punch alignment • Enhanced operator safety • CE compliant • Max. operating range: 4.3 meters Technical Specifications • Bending Force: 40 Tons • Bending Length: 1250 mm • Distance Between Uprights: 1100 mm • Stroke: 210 mm • Daylight: 465 mm • Throat Depth: 410 mm • Table Height: 885 mm • Machine Length: 3060 mm • Machine Width: 2195 mm • Machine Height: 2730 mm • Approach Speed: 150 mm/s • Return Speed: 120 mm/s • Bending Speed: 10 mm/s • Oil Tank Capacity: 95 L • Machine Weight: 3400 kg • Main Motor Power: 4 kW • Backgauge X Axis Speed: 300 mm/s • Backgauge R Axis Speed: 250 mm/s

Stanje: novo, Leto izdelave: 2026, moč: 7,5 kW (10,20 KM), stiskalna sila: 100 t, hod: 260 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 200 mm/s, globina grla: 410 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, HPB B100-3100 – 100 Ton x 3100 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB B100-3100 CNC Hydraulic Press Brake is designed for precise and repeatable sheet metal bending operations, offering 100 tons of bending force and a bending length of 3100 mm. With its ESA S830 CNC control unit, servo-driven backgauge system, rigid machine frame, and professional tooling, this press brake delivers high performance for metalworking and industrial fabrication facilities. Standard Features Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 3100 mm ESA S830 CNC Control Unit (3-4 Axis) 10” 2D touchscreen graphical display Manual bend sequencing and collision calculation Angle correction computation (crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSS Servo-driven X-R Axis Backgauge System X-axis travel: 750 mm X-axis speed: 250 mm/s Accuracy: ±0.05 mm R-axis travel: 250 mm Heavy-duty steel frame construction Hardened ball screw Linear rail system X-axis extendable up to 1000 mm (optional) Backgauge Fingers 2 pieces Flat type 3-step (10 mm / 20 mm / 30 mm) Manual Z-axis adjustment European Type Quick Clamp Promecam Upper Tool Holder E7 Quick tool change system Safe operation Practical and ergonomic design CRONOSS Special Narrow Bottom Table Bottom table width of 70 mm or 90 mm, depending on machine tonnage T-slot can be added upon request Standard Upper Tool ES1260 Tool height: 67 mm Tool angle: 85° Radius: 0.8 mm Material: C45 Max capacity: 100 Ton/Meter Standard Lower Die ES2067 4-way V-opening (16-22-35-50 mm) Tool angle: 85° Tool height: 60 mm Material: C45 Max capacity: 80 Ton/Meter B Series Open Frame Enclosure CRONOSS Premium open frame Black plexiglass safety panels Wide viewing area Ergonomic design Single Pedal System (P2) GIVI Linear Scales LED Lighting VDE Electrical Panel Schneider or Siemens Electrical Equipment Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Siemens Drive Energy-Saving Standby Function 2 Standard Sliding Front Support Arms Height adjustable Ruler measurement system Operator support system Optional Features CT-BEND Servo-Driven X+R Axis Backgauge System Fully automatic movement on X and R axes Manual movement on Z1 and Z2 axes X-axis extendable up to 1000 mm CNC Controlled Motorized Crowning System CRONOSS wedge-type system G.E.C. motorized structure Automatic CNC calculation Provides more accurate and homogeneous bends No operator intervention required AKAS FPSC Front Safety Laser System + Rear Light Curtain CE-compliant safety system Finger protection function Maximum working distance: 4.3 meters Technical Specifications Bending Force: 100 Ton Bending Length: 3100 mm Distance Between Uprights: 2600 mm Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Table Height: 905 mm Machine Length: 4670 mm Machine Width: 2230 mm Machine Height: 2950 mm Approach Speed: 200 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 180 L Kjdpszbrb Iefx Abxodn Machine Weight: 6780 kg Main Motor Power: 7.5 kW Backgauge X Axis Speed: 300 mm/s Backgauge R Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 110 mm/s, višina mize: 955 mm, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 320 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promecam quick-release clamping system • Sliding front support system • Manual crowning system (Original WILA cam lock) • Narrow lower table (European type) • GIVI linear scales • Standard upper die (H:67, 850 R:08) • Standard lower die (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R Kdedpfx Asx Nn Easbxsn • ROLLERI Roll200 hydraulic tool clamping • WILA hydraulic upper and lower tool clamping • Wide lower table for multi-groove tools • Backgauge X distance 1000 mm • AKAS or DSP laser beam front safety system • Additional backgauge fingers • Additional backgauge support TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 320 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/sec) 150 Return Speed (mm/sec) 110 Pressing Speed (mm/sec) 10 Oil Tank (Liters) 290 Machine Weight (kg) 14,700 Main Motor (kW) 22 CNC Control Unit ESA S640 CNC Axis Count Y1-Y2-X-R (4 Axis) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam lock) Safety System Front laser safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 60 t, hod: 400 mm, širina mize: 700 mm, dolžina mize: 700 mm, razmak između stupova: 700 mm, sila umika: 20 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 60/20 TON FOUR-POST HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 60/20 ton four-post hydraulic deep drawing press is a robust and compact solution designed for precise metal forming, deep drawing, and spinning applications. The four-post construction ensures stable parallelism and perpendicularity tolerances are maintained throughout the pressing process. The frame is manufactured from St52 grade steel and undergoes stress relief treatment via vibration. The ram and blankholder systems are independently controllable; stroke and pressure adjustments can be set precisely via the touchscreen panel. Outfitted with REXROTH or PARKER brand hydraulic components, IE3 class motors, and an automatic lubrication system, it offers long-lasting, safe, and efficient operation. Operator errors are minimized with its PLC-controlled system. This model is an ideal solution for small and medium-scale spinning, deep drawing, die testing, and auxiliary pressing applications. Key Advantages - Rigid four-post press frame - Independent stroke and tonnage control for ram and blankholder - Adjustable system via touchscreen panel - High precision and repeatability - Low maintenance requirement, long service life Applications - Metal spinning operations - Deep drawing processes - Die testing and prototype productions - Metal processing and auxiliary production lines ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-Post FRAME MATERIAL: St52 – ERDEMİR POST DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 60 Ton CAPACITY (BLANKHOLDER): 20 Ton DISTANCE BETWEEN POSTS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m Kedpjx N Ulgsfx Abxodn STROKE (RAM): 400 mm STROKE (BLANKHOLDER): 100 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 500 mm WELD STRESS RELIEF: Vibration stress relieving WELD APPLICATION: WPQR and WPS certified by TÜRK-AK, complies with EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/sec MOVING TABLE PRESSING SPEED: 12 mm/sec MOVING TABLE RETURN SPEED: 170 mm/sec BLANKHOLDER TABLE ADVANCE SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 175 mm – Ck45 BLANKHOLDER CYLINDER BORE: Ø 100 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3100 mm APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm PRE-FILL VALVE: NG 100 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from screen) RAM/BLANKHOLDER STROKE & TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Displayed on screen DIE MEMORY: Adjustable via screen LINEAR SCALE: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 18,5 kW (25,15 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 140 mm/s, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 220 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R – 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European-type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam-type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H:67, 850 R:08) • Standard lower die (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4, 6, and 8-axis backgauge configurations starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping systems • Wide lower table for multi-way dies • Backgauge X travel: 1000 mm • AKAS or DSP laser-guided front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 220 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Kdsdjx Nnzbjpfx Abxsn Open Height (Daylight) (mm) 515 Throat Depth (mm) 410 Table Height (mm) 940 Approach Speed (mm/s) 180 Return Speed (mm/s) 140 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 290 Machine Weight (kg) 11,300 Main Motor Power (kW) 18.5 CNC Control Unit ESA S640 CNC Axis Count Y1-Y2-X-R (4 Axis) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam-type) Safety System Laser front safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, moč: 15 kW (20,39 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 130 mm/s, višina mize: 935 mm, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 175 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promecam quick-release die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge type) • Narrow bottom table (European type) • GIVI brand linear scales • Standard top punch (H: 67, 850 R:08) • Standard bottom die (60x60 mm, 4 channels V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R Ksdpfx Absx Nn U Uoxsdn • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic top and bottom die clamping • Wide bottom table for multi-channel tooling • Backgauge X-axis travel up to 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge stop TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 175 Bending Length (mm) 3100 Clearance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 515 Throat Depth (mm) 410 Table Height (mm) 935 Approach Speed (mm/s) 180 Return Speed (mm/s) 130 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 180 Machine Weight (kg) 9700 Main Motor Power (kW) 15 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge type) Safety System Laser front safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 110 mm/s, višina mize: 955 mm, globina grla: 410 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 320 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-groove dies • Rear gauge X travel 1000 mm • AKAS or DSP front safety system with laser beam • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATION VALUE Bending Force (Ton) 320 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/s) 150 Return Speed (mm/s) 110 Pressing Speed (mm/s) 10 Oil Tank (L) 290 Machine Weight (kg) 16800 Main Motor (kW) 22 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Kdodpfsx Nn I Ujx Abxsn Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam type) Safety System Front laser safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, moč: 30 kW (40,79 KM), hod: 310 mm, obratovalna hitrost: 8 mm/s, hitrost vzvratne vožnje: 80 mm/s, višina mize: 1.055 mm, globina grla: 510 mm, delovna širina: 6.100 mm, upogibna sila (maks.): 400 t, razdalja med stojali: 5.100 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R – 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-channel dies • Backgauge X travel up to 1000 mm • AKAS or DSP front laser safety system • Additional backgauge fingers • Additional backgauge supports TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 6100 Distance Between Side Frames (mm) 5100 Stroke (mm) 310 Daylight (mm) 535 Throat Depth (mm) 510 Table Height (mm) 1055 Approach Speed (mm/sec) 100 Return Speed (mm/sec) 80 Pressing Speed (mm/sec) 8 Oil Tank (Lt) 400 Machine Weight (kg) 33000 Main Motor (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam type) Safety System Laser front safety Kdodpfxsx Nn Syo Abxsn Origin Turkey

Stanje: novo, Leto izdelave: 2025, moč: 18,5 kW (25,15 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 140 mm/s, višina mize: 965 mm, globina grla: 410 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 220 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, STANDARD FEATURES CNC-controlled hydraulic press brake Y1 – Y2 – X – R axes CNC controlled (4 axes) CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display) Offline PC programming capability Kedjx Nqqrjpfx Abxjdn Stress-relieved, heavy-duty steel frame CNC-controlled synchronized cylinder system 310 mm stroke 410 mm throat depth ±0.03 mm precision servo motorized backgauge Backgauge travel distances: X axis: 750 mm R axis: 250 mm Backgauge system with ball screws and linear guides Sliding type front support arms Manual crowning system (wedge type) European-style narrow bottom table European-style quick upper tool clamping system (Promecam type) High-precision linear scales Standard upper tool (H: 67 mm – 85° – R: 0.8) Standard lower die (60×60 mm – 4-groove V: 16 / 22 / 35 / 50 mm) Laser front safety system LED lighting Foot pedal Emergency stop buttons Safety equipment compliant with CE standards OPTIONAL FEATURES Backgauge systems with 4 / 6 / 8 axes starting from X + R Extension of backgauge X axis distance to 1000 mm Additional backgauge fingers Hydraulic upper and lower tool clamping systems Motorized crowning system Wide bottom table for multi-groove dies Front safety laser system (AKAS or DSP) Rear safety light barrier CNC-controlled sheet metal front support systems Automatic angle measurement system Oil cooler or oil heater Electrical cabinet air conditioning cooling system Deep throat option TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL) Bending force: 220 tons Bending length: 4100 mm Distance between side frames: 3600 mm Stroke: 310 mm Open height (daylight): 515 mm Throat depth: 410 mm Table height: 965 mm Backgauge axes: X = 750 mm / R = 250 mm Approach speed: 180 mm/s Working speed: 140 mm/s Return speed: 10 mm/s Main motor power: 18.5 kW Oil tank capacity: 290 liters Machine weight: ~13,650 kg Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm

Stanje: novo, Leto izdelave: 2025, moč: 30 kW (40,79 KM), hod: 310 mm, obratovalna hitrost: 8 mm/s, hitrost vzvratne vožnje: 80 mm/s, višina mize: 985 mm, globina grla: 510 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 400 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promecam quick-release die clamping system • Sliding front support system • Manual crowning system (Original WILA cam) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options, starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-groove tooling • Backgauge X travel: 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 4100 Distance Between Frames (mm) 3600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 510 Table Height (mm) 985 Descent Speed (mm/s) 100 Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank Capacity (L) 400 Machine Weight (kg) 22500 Kdodpex Npalefx Abxjn Main Motor Power (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam) Safety System Laser front safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, moč: 5,5 kW (7,48 KM), stiskalna sila: 60 t, širina mize: 590 mm, dolžina mize: 800 mm, prebijalna sila: 60 t, prebojna odprtina v mizi: 140 mm, vrtina cilindra: 40 mm, nastavitev hoda: 100 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and forming with dies. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 60 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for serial production. Key Advantages: - Stable stroke performance and high repeatability in mass production Kdjdpfx Abjvtx D Njxsn - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual hand/foot pedal control Application Areas: - Cold cutting and punching operations - Cold forging applications - Metal forming with dies - High volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slide guide • Spheroidal cast iron connecting rods and gear housings • Crankshaft and transmission shafts from 4140 tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Double-coil safety valve • Manual adjustable stroke • Finger–hand protection with light curtain safety system • PLC control system • Dual hand/foot pedal control system • Mechanical safety lock system • Emergency reverse motor operation • Occupational safety regulation compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • Custom-designed die set • Eight-slide guide ✅ TECHNICAL SPECIFICATIONS (60 TON) Capacity: 60 Ton Throat depth: 260 mm Table–ram distance: 360 mm Ram–table distance: 395 mm Distance between walls: 380 mm Ram adjustment (stroke): 70 mm Approx. press width: 1340 mm Approx. press depth: 1450 mm Approx. press height: 2200 mm Front anchorage: 630 mm Side anchorage: 875 mm Table hole diameter: Ø150 mm Table size: 520×720 mm Die clamping slot diameter: Ø40 mm Ram size: 340×220 mm Floor to table height: 730 mm Stroke adjustment: 0–95 mm Strokes per minute: 50 SPM Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2750 kg Note: Please notify us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2024, Premer cevi (maks.): 60 mm, moč: 2,2 kW (2,99 KM), trajanje garancije: 12 meseci, obratovalna hitrost: 45.000 mm/s, COUNTRY OF ORIGIN: TURKIYE WARRANTY PERIOD: 12 MONTHS Standard Equipment - Built-in memory NC control display ensures professional and user-friendly machine operation - Pipe bending capacity up to Ø 60 mm x 4 mm - Clamping device supports the pipe while securing it to the machine - Spare holes for mounting special tooling - Welded steel construction body - Thermal – Power & Reset indicator lights - Emergency stop button - Machine features 500 internal program memory capacity - Minimum bending radius is 3 times the pipe diameter (Ø), varies with wall thickness and material - Includes 1 set of Ø 33.7 mm standard pipe die - User manual Kdedpevkua Uofx Abxen MODEL NBM 60 Min. Diameter mm 80 Max. Diameter mm 320 Working Speed m/s 3 Motor Power kW 2 Weight kg 250 Dimensions (L x W x H) 750 x 850 x 1050 mm Bending Capacity NBM 60 Thick-Walled Pipe mm 60×4 Black Steel Pipe mm 48×4 Aluminum Pipe mm 60×8 Solid Round Pipe (black steel) mm 40 Square Pipe (black steel) mm 40x40x4

Stanje: novo, Leto izdelave: 2025, moč: 11 kW (14,96 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 130 mm/s, višina mize: 935 mm, globina grla: 410 mm, delovna širina: 3.100 mm, upogibna sila (maks.): 135 t, razdalja med stojali: 2.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-motorized back gauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge type) • Narrow lower table (European type) • GIVI brand linear scales Kjdpfex Nn N Eox Abxjdn • Standard upper punch (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis back gauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-channel die • Back gauge X travel 1000 mm • AKAS or DSP laser beam front safety system • Additional back gauge fingers • Additional back gauge tongues TECHNICAL SPECIFICATION VALUE Bending Force (ton) 135 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Daylight (mm) 515 Throat Depth (mm) 410 Table Height (mm) 935 Approach Speed (mm/sec) 210 Return Speed (mm/sec) 130 Pressing Speed (mm/sec) 10 Oil Tank Capacity (L) 180 Machine Weight (kg) 8350 Main Motor Power (kW) 11 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Back Gauge X (mm) 750 Back Gauge R (mm) 250 Crowning Manual (WILA wedge type) Safety System Laser front safety Origin Turkey

Stanje: novo, Leto izdelave: 2026, moč: 55 kW (74,78 KM), stiskalna sila: 1.250 t, hod: 510 mm, obratovalna hitrost: 6 mm/s, hitrost vzvratne vožnje: 55 mm/s, globina grla: 810 mm, razmak između stupova: 7.100 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, 1250 Ton 8.1 Meter CNC Press Brake – New / 12 Months Warranty Press brake machines are heavy-duty industrial production equipment designed for precise, repeatable, and controlled bending of large sheet metals. The CRONOSSTECH-manufactured 1250 Ton CNC Press Brake, featuring an 8100 mm bending length and high tonnage capacity, is specifically engineered for heavy steel construction, energy, and large-scale industrial projects. Key Advantages - High-precision bending over 8.1 meters - High bending capacity of 1250 tons - Advanced automation with ESA S840W CNC control - Servo motor-driven X+R-axis precision back gauge - Homogeneous bending with WILA motorized crowning system - Heavy-duty, high-strength frame construction Kdodpfx Ajyzb Hnsbxen Applications - Heavy steel fabrication - Energy and infrastructure projects - Shipbuilding and shipyard industry - Defense and heavy machinery manufacturing - Large-size sheet metal bending applications Standard Features - ESA S840W CNC control unit (3–8 axes) - 15.6” touchscreen, 2D graphics, and offline software - Automatic bending sequence and collision control - Angular measurement and automatic crowning compensation - Servo-driven X + R-axis back gauge system - High-precision linear guide and ball screw system - 2 back gauge fingers (3-position) - Promecam quick-tool clamping system (E20) - Eurostamp standard punch and die set - D Series full enclosure safety guard system - Dual foot pedal control (up / down) - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic system, Parker pump - LED lighting and energy-saving mode - Heavy-duty front support arms - WILA motorized crowning system Technical Specifications - Bending Capacity: 1250 Ton - Bending Length: 8100 mm - Distance Between Columns: 7100 mm - Stroke: 510 mm - Daylight: 775 mm - Throat Depth: 810 mm - Table Height: 750 mm - Pit Depth: 2375 mm - Machine Dimensions (LxWxH): 10600 x 3650 x 4500 mm - Approach Speed: 70 mm/s - Bending Speed: 6 mm/s - Return Speed: 55 mm/s - Oil Tank: 1000 L - Motor Power: 55 kW - Weight: 136,000 kg Optional Features - Advanced multi-axis back gauge systems (4–6–8 axes) - WILA hydraulic tool clamping systems - Roller hydraulic punch clamping - Wide table (for Multi-Vee dies) - 1000 mm X-axis stroke - AKAS / DSP laser safety systems - Additional back gauge fingers General Information - Country of Manufacture: Turkey - Warranty: 12 Months - Condition: New and unused This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2026, moč: 22 kW (29,91 KM), stiskalna sila: 320 t, hod: 310 mm, obratovalna hitrost: 9 mm/s, hitrost vzvratne vožnje: 110 mm/s, globina grla: 410 mm, razmak između stupova: 5.100 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, 320 Tonne 6 Metre CNC Press Brake – HPB C320-6100 – New / 12 Months Warranty Press brake machines are essential production equipment that provide high precision, repeatability, and manufacturing efficiency in sheet metal bending operations. The HPB C320-6100 CNC Press Brake, manufactured by CRONOSSTECH, is designed for precise and stable processing of large-size sheets with a bending capacity of 320 tonnes and a bending length of 6100 mm. Key Advantages - High-precision bending over 6 metres length - Advanced programming with ESA S840 CNC control unit - Servo motor-driven high-precision back gauge system - Homogeneous bending with WILA crowning system - Heavy-duty frame for high stability - Hydraulics and electrical components of European origin Areas of Application - Large format sheet metal bending - Steel structure manufacturing - Energy and infrastructure projects - Machinery and equipment production - Industrial production lines Standard Features - ESA S840 (3-6 axis) CNC control unit - 15.6” touchscreen, 2D graphics, and offline software - Automatic bending sequence and collision control - Angle measurement and automatic angle correction (crowning) - CRONOSS X+R axis servo motor back gauge (±0.03 mm accuracy) - Hardened linear guides and ball screw system - 2 adjustable back gauge fingers - Promecam quick tool clamping system - Eurostamp standard punch & die set - Full enclosure safety system - Double foot pedal (up/down control) Ksdpfxeyzb Ewj Abxodn - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic block, Eckerle pump - LED lighting, energy saving mode - Front support arms (high strength, adjustable) - Manual WILA crowning system Technical Specifications – HPB C320-6100 - Bending Capacity: 320 Tonne - Bending Length: 6100 mm - Distance Between Frames: 5100 mm - Stroke: 310 mm - Daylight: 535 mm - Throat Depth: 410 mm - Table Height: 1065 mm - Machine Dimensions (LxWxH): 8150 x 2655 x 3170 mm - Approach Speed: 150 mm/sec - Bending Speed: 9 mm/sec - Return Speed: 110 mm/sec - Oil Tank: 290 L - Motor Power: 22 kW - Weight: 27,000 kg General Information - Place of Manufacture: Turkey - Warranty: 12 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.