Cronosstech Cecp 150 nakup rabljenega (10.697)

Stanje: novo, Leto izdelave: 2026, moč: 15 kW (20,39 KM), stiskalna sila: 150 t, hod: 125 mm, širina mize: 660 mm, dolžina mize: 920 mm, globina grla: 320 mm, širina plošče bata: 290 mm, dolžina plošče bata: 600 mm, skupna dolžina: 1.600 mm, skupna širina: 2.280 mm, skupna višina: 2.750 mm, skupna masa: 7.100 kg, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CECP 150 | 150-tonska eksцентриčna stiskalnica tipa C | Stroj za rezanje in oblikovanje plošč za težko industrijo Od zanesljivega turškega proizvajalca stiskalnic, CRONOSSTECH: 100-odstotno CE-certificirana 150-tonska eksцентриčna stiskalnica tipa C za rezanje, prebijanje in obdelavo debelejših plošč. Industrijske rešitve z močno, trdno jekleno konstrukcijo, ki zagotavljajo minimalno upogibanje, maksimalno varnost pri delu in natančno ponovljivost giba pri serijski proizvodnji v težki industriji. Ključne prednosti za vašo industrijsko proizvodnjo: Visoka vzdržljivost in ponovljivost: Jeklena konstrukcija, ki ohranja stabilnost pri obremenitvah, zagotavlja brezhibno kakovost izdelkov in dolgo življenjsko dobo orodij. Maksimalna varnost pri delu: Zasnova, osredotočena na varnost operaterja, z varnostno pregrado, dvojnim varnostnim ventilom in mehansko varovalko. Nizki stroški vzdrževanja: Centralni, popolnoma avtomatiziran sistem za mazanje zagotavlja neprekinjeno in nemoteno delovanje. Prodpfezwt Nwex Amfea Pametni nadzor (standardna oprema): Napredna PLC platforma in standardno vključeni zaslon na dotik LCD omogočajo hitro upravljanje receptov in nastavitev. Področja uporabe: Operacije rezanja, prebijanja in utrjevanja plošč Postopki hladnega stiskanja in oblikovanja težkih kovin Serijske proizvodnje v avtomobilski industriji, industriji gospodinjskih aparatov in težki industriji ✅ STANDARDNA OPREMA Trdna jeklena konstrukcija Sistem vodil s štirimi ležaji Kovano jekleno pogonsko ročico in ležaji pogonskega sistema Kovano jekleno gred in pogonska gred iz jekla 4140 Pnevmatska sklopka in zavora Zaslon na dotik LCD in sistem nadzora PLC Ročno nastavljiv hod in mehanska varovalka Dvojni sistem upravljanja z roko/pedalom Zasilno obratno gibanje motorja Popolna skladnost s standardi CE in varnostnimi predpisi ✅ DODATNA OPREMA (opcija) Industrijske protidrseče podložke Hidravlični varnostni sistem Rezervna plošča Integracija sistema za odvijanje, pogon in izravnavo jeklenih trakov Sistem vodil z osmimi ležaji Posebna zasnova in izdelava enega kompleta orodij za projekt ✅ TEHNIČNE KARAKTERISTIKE (150 TON) Kapaciteta: 150 ton | Moč motorja: 15 kW (1450 vrt/min) | Število hodov: 42 hodov/min Velikost plošče: 660 x 920 mm | Velikost bati: 600 x 290 mm Globina grla: 320 mm | Nastavitev hoda: 10–125 mm Nastavitev bati (nastavitev): 120 mm | Premer luknje plošče: Ø220 mm Razdalja med mizo in batom: 500 mm | Razdalja med vodilom in mizo: 540 mm Razdalja med stenicami: 500 mm | Višina od tal do mize: 805 mm Premer luknje za pritrditev orodja: Ø55 mm Dimenzije sprednjih/stranskih sidrišč: 840 mm / 1300 mm Zunanje dimenzije (Š x G x V): 1600 x 2280 x 2750 mm Približna teža: 7100 kg (Opomba: Če imate posebne zahteve glede tehničnih sprememb za vašo proizvodno linijo, nas prosim obvestite.) ✅ GARANCIJA PROIZVAJALCA Ta stroj je izdelan v Turčiji po tehnologiji CRONOSSTECH. Globalni izvoz, uvedba v obrat in vsa tehnična podpora po prodaji so izvedene neposredno s strani naše strokovne ekipe.

Stanje: novo, Leto izdelave: 2026, moč: 7,5 kW (10,20 KM), stiskalna sila: 80 t, hod: 100 mm, širina mize: 540 mm, dolžina mize: 740 mm, globina grla: 280 mm, širina plošče bata: 370 mm, skupna dolžina: 1.400 mm, skupna širina: 1.735 mm, skupna višina: 2.220 mm, skupna masa: 4.000 kg, Oprema: CE označba, varnostna svetlobna zapora, CRONOSSTECH CECP 80 | 80-tonska ekscentrična preša tipa C | Stroj za rezanje in oblikovanje pločevine Od podjetja CRONOSSTECH, zanesljivega turškega proizvajalca strojev za prešanje, 80-tonska ekscentrična preša tipa C, v celoti skladna s standardom CE, za vaše operacije rezanja, prebijanja in hladnega oblikovanja. Industrijske rešitve za prešanje, ki zagotavljajo minimalno vzdrževanje, maksimalno varnost pri delu in brezhibno natančnost hodov, idealne za vaše proizvodne linije z velikim številom izdelkov. Ključne prednosti za vašo industrijsko proizvodnjo: Visoka ponovljivost: Stabilna zmogljivost hoda pri serijski proizvodnji zagotavlja brezhibno kakovost izdelkov in minimalne izgube. Maksimalna varnost pri delu: Zasnova, osredotočena na varnost operaterja, z varnostno pregrado, dvojnim varnostnim ventilom in mehansko zaščito. Nizki stroški vzdrževanja: Zahvaljujoč centralnemu, popolnoma avtomatiziranemu sistemu za mazanje, omogoča neprekinjeno, brezhibno in dolgotrajno delovanje. Hitra uvedba v proizvodnjo: Napredna podlaga za nadzor PLC in dvojni ročni/pedalni nadzor omogočata takojšen začetek proizvodnje. Območja uporabe: Operacije rezanja, prebijanja in utiskovanja pločevine Hladno striženje in aplikacije za oblikovanje kovin Proizvodne linije za avtomobilsko industrijo, gospodinjske aparate in pomožno industrijo ✅ STANDARDNA OPREMA Jeklena konstrukcija z robustnim ohišjem Sistem vodil, podprt na štirih straneh Sferoidna litina za povezovalno roko in ležaje gredi Kurbel in pogonska gred iz jekla 4140, podvržena kaljenju Pnevmatska sklopka in kombinacija zavor Ročno nastavljiv hod Silni hod v sili Popolna skladnost s standardi CE in predpisi o varnosti pri delu ✅ DODATNA OPREMA (opcija) Industrijske podlage za dušenje vibracij Na dotik občutljiv LCD-zaslon (standard za modele od 150 do 300 ton) Hidravlični varnostni sistem (standard za modele od 200 do 300 ton) Dodatna plošča Integracija stroja za odvijanje, podajalnika in poravnave valjane pločevine Sistem drsnega mehanizma z 8 ležaji Zasnova in izdelava kompleta orodij po meri za projekt ✅ TEHNIČNE LASTNOSTI (80 TON) Kapaciteta: 80 ton | Moč motorja: 7,5 kW (1450 vrt/min) | Število hodov: 45–75 hodov/min Dimenzije plošče: 540 × 740 mm | Dimenzije bata: 370 × 230 mm Globina grla: 280 mm | Nastavitev hoda: 10–100 mm Nastavitev bata (urejanje): 85 mm | Premer luknje plošče: Ø190 mm Razdalja med mizo in batom: 400 mm | Razdalja med drsnikom in mizo: 420 mm Razdalja med stenami: 400 mm | Višina od tal do mize: 755 mm Premer vtičnice za pritrditev orodij: Ø40 mm Mere prednjega/stranskega sidra: 670 mm / 1040 mm Zunanje dimenzije (Š x G x V): 1400 x 1735 x 2220 mm Približna teža: 4000 kg (Opomba: Če imate posebne zahteve glede tehničnih sprememb za vašo proizvodno linijo, nas prosimo obvestite.) Pedpozwk S Nefx Amfjra ✅ GARANCIJA PROIZVAJALCA Ta stroj je bil zasnovan in izdelan v Turčiji s strani podjetja CRONOSSTECH. Svetovna izvozna mreža, uvedba v obrat in celotna tehniška podpora po prodaji so neposredno izvedene s strani naše strokovne ekipe.

Stanje: novo, Leto izdelave: 2026, moč: 4 kW (5,44 KM), stiskalna sila: 60 t, hod: 95 mm, širina mize: 520 mm, dolžina mize: 720 mm, globina grla: 260 mm, širina plošče bata: 340 mm, dolžina plošče bata: 720 mm, skupna dolžina: 1.340 mm, skupna širina: 1.450 mm, skupna višina: 2.200 mm, skupna masa: 2.750 kg, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CECP 60 | 60-tonska eksцентриčna stiskalnica tipa C | Stroj za rezanje in oblikovanje pločevine Od CRONOSSTECH, zanesljivega turškega proizvajalca stiskalnic: 100-odstotno CE-certificirana 60-tonska eksцентриčna stiskalnica tipa C za vaše operacije rezanja, prebijanja in hladnega oblikovanja pločevine. Industrijske rešitve za stiskalnice, ki zagotavljajo minimalno vzdrževanje, maksimalno varnost pri delu in brezhibno natančnost pri gibu, v vaših proizvodnih linijah z velikim številom izdelkov. Ključne prednosti za vašo industrijsko proizvodnjo: Visoka ponovljivost: Stabilna zmogljivost giba v proizvodnih linijah z velikim številom izdelkov zmanjšuje stopnjo izgube materiala. Maksimalna varnost pri delu: Zasnova, usmerjena k varnosti operaterja, z varnostno pregrado in dvojnim elektromagnetnim ventilom. Nizki stroški vzdrževanja: Neprekinjeno in dolgotrajno delovanje zahvaljujoč centralnemu, popolnoma avtomatiziranemu sistemu za podmazovanje. Hitra uvedba: Takojšen začetek proizvodnje zahvaljujoč infrastrukturi za nadzor PLC in dvojnemu upravljalniku (ročnemu/pedalnemu). Področja uporabe: Operacije rezanja, prebijanja in udarjanja pločevine Hladno striženje in aplikacije za oblikovanje kovin Proizvodne linije za avtomobilsko industrijo, gospodinjske aparate in dobavitelje ✅ STANDARDNA OPREMA Jeklena konstrukcija z robustnim ohišjem Sistem vodil z oporo na štirih straneh Sferoidno litje povezovalne palice in ležajev zobnika Kurbel in pogonska gred iz 4140 kaljenega jekla Pnevmatska sklopka in kombinacija zavor Ročno nastavljiv gib in mehanska varnostna zapora Zasilno obratno gibanje motorja ✅ DODATNE MOŽNOSTI Industrijski blažilniki vibracij Na dotik občutljiv zaslon LCD (standard za modele od 150 do 300 ton) Podezwk Rrjpfx Amfora Hidravlični varnostni sistem (standard za modele od 200 do 300 ton) Integracija odvijalnika, podajalnika in poravnava valjarske pločevine Posebna zasnova in proizvodnja 1 kompleta matrice po projektu ✅ TEHNIČNE SPECIFIKACIJE (60 TON) Kapaciteta: 60 ton | Moč motorja: 4 kW | Število gibov na minuto: 50 gibov/min Velikost plošče: 520 × 720 mm | Velikost bata: 340 × 220 mm Globina grla: 260 mm | Nastavitev giba: 0–95 mm Nastavitev bata: 70 mm | Premer luknje plošče: Ø150 mm Razdalja med mizo in batom: 360 mm | Razdalja med drsnikom in mizo: 395 mm Zunanje dimenzije (Š x G x V): 1340 x 1450 x 2200 mm Približna teža: 2750 kg (Opomba: Za posebne zahteve glede giba, velikosti plošče in tehničnih sprememb za vašo proizvodno linijo nas kontaktirajte.) ✅ GARANCIJA PROIZVAJALCA Ta stroj je proizveden v Turčiji po standardih inženiringa CRONOSSTECH. Izvoz, namestitev in vsa tehnična podpora po prodaji se izvajajo po mednarodnih standardih, in to neposredno s strani naših strokovnih ekip.

Stanje: novo, Leto izdelave: 2026, moč: 15 kW (20,39 KM), stiskalna sila: 200 t, širina mize: 800 mm, dolžina mize: 1.100 mm, prebijalna sila: 200 t, prebojna odprtina v mizi: 220 mm, vrtina cilindra: 60 mm, nastavitev hoda: 180 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by a force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 200 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready use with PLC control and dual hand/foot controls Applications - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-surface slide guides • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 quenched and tempered steel • Central, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Double-solenoid safety valve • Manually adjustable stroke • Light curtain hand–finger safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock • Emergency reverse motor movement • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES Prsdpfx Aevtyx Iemfoa • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare table • Decoiler, feeder, and straightener • One set of tooling/custom die as requested • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Ton Throat depth: 340 mm Bed–ram distance: 500 mm Slide–bed distance: 600 mm Distance between uprights: 510 mm Ram adjustment (shut height): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchor distance: 920 mm Side anchor distance: 1420 mm Table hole diameter: Ø240 mm Table size: 680×1000 mm Die clamping slot diameter: Ø60 mm Ram size: 620×350 mm Floor to bed height: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approx. weight: 9200 kg Note: If you require any changes to the technical specifications, please let us know. ✅ MANUFACTURING / SUPPLY NOTE: This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 400 t, hod: 1.000 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 150 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-gibbed H-frame structure provides maximum rigidity during pressing, maintaining stable parallelism and perpendicularity tolerances throughout the long stroke. The CHSP 400/150 model, featuring a 400-ton main ram and 150-ton blank-holder (pot) capacity, is designed for deep drawing and spinning applications requiring high tonnage. The machine frame is stress-relieved using vibration methods, ensuring long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-gibbed H-frame press body type - Stress-relieved frame by vibration - Bronze Zr14 slide bushings - Welds certified by TÜRK-AK accredited WPQR and WPS processes (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 400/150 - Type: Steel construction, 8-gibbed H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 400 tons - Capacity (Pot): 150 tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Stroke (Pot): 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding procedures supervised by "welding coordination engineers" certified to EN ISO 14731) - Max. Working Pressure: 250 bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Spinning Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Pot Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø450 mm – Ck45 - Pot Cylinder Bore: Ø280 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5600 mm - Approx. Press Width: 3250 mm Podpfx Aox N Uhhomfsra - Approx. Press Depth: 2200 mm - Bottom Table Height from Floor: 1400 mm - Pre-Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 24 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), stiskalna sila: 250 t, hod: 160 mm, širina mize: 700 mm, dolžina mize: 1.100 mm, globina grla: 350 mm, nastavitev hoda: 150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, The eccentric press is a type of mechanical press operated by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure make it a reliable performer suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready with PLC control and dual-hand/foot operation Applications - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES - Steel construction body - Four-sided guided slide - Nodular cast iron connecting rod and gear housings - Crankshaft and transmission shafts made of 4140 tempered steel - Centralized fully-automatic grease lubrication - Pneumatic clutch and brake combination - Compliance with CE safety directives - Double-coil safety valve - Manually adjustable stroke - Finger-hand protection safety system with light curtain - PLC control system - Dual-hand/foot control system - Mechanical safety system - Emergency reverse motor operation - Complies with occupational health and safety regulations - Conforms to CE standards ✅ OPTIONAL FEATURES - Vibration isolation mounts - Touch LCD screen (standard for 150–300 ton models) - Hydraulic safety system (standard for 200–300 ton models) - Spare bolster plate - Coil feeder, straightener, and uncoiler - One set of dies according to requested specifications - Eight-way guided slide ✅ TECHNICAL SPECIFICATIONS (250 TON) - Capacity: 250 tons Prsdpfx Aox N Nfbemfsa - Throat depth: 350 mm - Table–ram distance: 520 mm - Slide–table distance: 630 mm - Distance between side frames: 520 mm - Ram adjustment (regulation): 150 mm - Approx. press width: 2000 mm - Approx. press depth: 2500 mm - Approx. press height: 3100 mm - Front anchoring dimension: 930 mm - Side anchoring dimension: 1430 mm - Table hole diameter: Ø250 mm - Table size: 700×1100 mm - Die clamping slot diameter: Ø60 mm - Ram size: 670×380 mm - Table height from floor: 810 mm - Stroke adjustment: 20–160 mm - Strokes per minute: 40 spm - Motor power: 22 + 2.2 kW - Motor speed: 1450 rpm - Approximate weight: 12,000 kg Note: Please inform us if you require modifications in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 30 kW (40,79 KM), stiskalna sila: 300 t, hod: 200 mm, širina mize: 700 mm, dolžina mize: 1.200 mm, globina grla: 370 mm, nastavitev hoda: 150 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Eccentric presses are mechanical press types operated by an eccentric mechanism, used for cold forming operations such as punching, cutting, and forming with dies. Thanks to their high production speed and repeatability, they offer an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement thanks to central automatic lubrication - Ready-to-use with PLC control and dual-hand/foot pedal operation Areas of Application - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction body • 4-way guide slide • Spheroidal cast connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Designed according to CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system Prjdpfx Asx N Nfhemfsa • PLC control system • Dual-hand/foot pedal operation system • Mechanical safety system • Emergency motor reverse feature • Complies with occupational safety regulations • CE compliance ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touch-screen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die according to requirements • 8-way slide system ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Throat depth: 370 mm Bed–ram distance: 530 mm Ram–table distance: 650 mm Distance between side frames: 470 mm Ram adjustment (shut height adj.): 150 mm Approximate press width: 2000 mm Approximate press depth: 2700 mm Approximate press height: 3200 mm Front anchor dimension: 940 mm Side anchor dimension: 1440 mm Table hole diameter: Ø260 mm Table size: 700×1200 mm Die clamping slot diameter: Ø60 mm Ram size: 780×400 mm Floor-to-table height: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 spm Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 600 mm, širina mize: 1.000 mm, dolžina mize: 1.200 mm, sila umika: 50 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and forming applications. Thanks to the 8-guided H-frame structure, maximum rigidity is maintained during pressing; parallelism and perpendicularity tolerances are consistently upheld throughout the stroke. The CHSP 150/50 model is specially engineered for precise and repeatable deep drawing operations, with a 150-ton main ram and a 50-ton cushion (die cushion) capacity. The frame construction undergoes stress-relieving via vibration, ensuring reliable and long-lasting performance. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press type - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding processes accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, 8-guided H-frame press type Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Ton Capacity (Cushion): 50 Ton Movable Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 700 mm Stress Relief: Vibration stress relieving Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017. (Welding operations are supervised by "welding coordination engineers" certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/sec Psdpsx N T U Hsfx Amfsra Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Cushion Table Forward Speed: 30 mm/sec Main Cylinder Internal Diameter: Ø280 mm – Ck45 Cushion Cylinder Internal Diameter: Ø160 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height of the Press: 3650 mm Approx. Width of the Press: 2950 mm Approx. Depth of the Press: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 11 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 500 mm, širina mize: 800 mm, dolžina mize: 1.000 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial-grade presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing operations. Thanks to its 8-guide H-frame construction, the press delivers stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed for medium-capacity applications, aiming for reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered for heavy-duty industrial environments. The frame and load-bearing components are stress-relieved by vibration. Bronze Zr14 slide bushings ensure smooth load transfer and long-term stable performance. ⚙️ Standard Equipment: • Steel construction, H-type press body with 8 slide guides • Stress-relieved frame and load-bearing parts (vibration treated) • Bronze Zr14 slide bushings • WPQR & WPS certified welding, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Machine frame designed and manufactured according to CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning • Monitoring of hydraulic oil temperature and system status on screen • Cooling system • Off-line filtration • Two-hand control system • Light curtain (standard operator safety) • SIEMENS and SCHNEIDER electrical switchgear 📐 Technical Specifications – CHP 150 • Type: Steel construction, 8-guide H-frame press • Frame Material: St52 – ERDEMİR • Slide Bushing: Bronze Zr14 • Capacity (Ram): 150 Tons • Movable Table Dimensions: 800 × 1000 mm • Fixed Table Dimensions: 800 × 1000 mm • Parallelism Tolerance: 120 micron/meter • Squareness Tolerance: 60 micron/meter Pedox N T Dzjpfx Amfera • Stroke (Ram): 500 mm • Minimum Daylight: 100 mm • Maximum Daylight: 600 mm • Weld Stress Relief: Vibration treated • Welding: WPQR & WPS approved, TÜRK-AK accredited, complies with EN ISO 15614-1:2017 supervised by certified welding coordination engineers (EN ISO 14731) • Max. Working Pressure: 250 Bar • Total Motor Power: 18.5 kW – IE3 • Main Pump: 32 cm³ – REXROTH or PARKER • Movable Table Fast Descent Speed: 150 mm/sec • Movable Table Pressing Speed: 12 mm/sec • Movable Table Return Speed: 170 mm/sec • Main Cylinder Inner Diameter: Ø280 mm – Ck45 • Approx. Height: 3650 mm • Approx. Width: 2950 mm • Approx. Depth: 2000 mm • Lower Table Height from Floor: 1250 mm • Pre-fill Valve: NG 100 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Distance Encoder: NOVATECHNIK or TURCK • PLC: DELTA • Touch Panel: DELTA 7” • Switchgear: SIEMENS – SCHNEIDER • Approximate Weight: 7 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, moč: 4 kW (5,44 KM), stiskalna sila: 40 t, širina mize: 440 mm, dolžina mize: 700 mm, prebijalna sila: 40 t, prebojna odprtina v mizi: 140 mm, vrtina cilindra: 35 mm, nastavitev hoda: 80 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Press; is a type of mechanical press used in cold forming operations such as punching, cutting, and forming with dies. It operates by transmitting force through an eccentric mechanism. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 40 Ton is designed for stable operation in cold forming applications. Its rigid steel frame construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance thanks to centralized automatic lubrication - Production-ready use with PLC control + dual hand/foot control Areas of application: - Cold cutting and punching operations - Cold notching applications - Metal forming with dies - High volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-point guided ram • Spheroidal cast connecting rod and gear bearings • Crankshaft and transmission shafts made from 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • Compliant with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies as specified Pedpfx Amovtx Axofera • Eight-point guided ram ✅ TECHNICAL SPECIFICATIONS (40 TON) Capacity: 40 Ton Throat depth: 220 mm Table–ram distance: 340 mm Distance between side frames: 330 mm Ram adjustment (setting): 60 mm Approx. press width: 1050 mm Approx. press depth: 1280 mm Approx. press height: 2100 mm Front anchorage dimension: 575 mm Side anchorage dimension: 740 mm Table hole diameter: Ø150 mm Table size: 440×630 mm Die holder slot diameter: Ø40 mm Ram size: 290×180 mm Floor-to-table height: 720 mm Stroke adjustment: 10–70 mm Strokes per minute: 55 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2100 kg Note: For any requests to modify the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 130 t, širina mize: 750 mm, dolžina mize: 1.000 mm, prebijalna sila: 130 t, prebojna odprtina v mizi: 220 mm, vrtina cilindra: 55 mm, nastavitev hoda: 140 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Press; is a type of mechanical press powered by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. Podpovtyvgjfx Amfsra CRONOSSTECH C-Type Eccentric Press 125 Ton is designed for stable operation in cold forming applications. Its rigid steel construction body, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver dependable performance suitable for series production. Key Advantages • Stable stroke performance and high repeatability in mass production • Operator safety-focused design (light curtain + safety systems) • Low maintenance due to centralized automatic lubrication • Production-ready use with PLC control + dual hand/foot control Application Areas • Cold cutting and punching operations • Cold breaking applications • Metal die forming • High-volume production lines ✅ STANDARD FEATURES • Steel frame body • Four-face guided slideways • Spheroidal cast connecting rod and gear housings • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Double-coil safety valve • Manually adjustable stroke • Finger–hand protection safety system with light curtain • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Compliance with occupational safety regulations • CE standard conformity ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touch LCD display (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener units • One set of dies manufactured to customer requirements • Eight-way slide guiding ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 tons Throat depth: 310 mm Table–ram distance: 500 mm Slide–table distance: 510 mm Distance between uprights: 450 mm Ram adjustment (regulation): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchoring size: 790 mm Side anchoring size: 1250 mm Table bore diameter: Ø210 mm Table size: 630×820 mm Die clamping slot diameter: Ø55 mm Ram size: 500×250 mm Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: Please contact us for changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 600 mm, širina mize: 800 mm, dolžina mize: 800 mm, razmak između stupova: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 150/50 TON FOUR-POST HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 150/50 ton four-post hydraulic deep drawing press is an industrial solution designed for metal forming, deep drawing, and precision pressing applications. It features a robust four-post rigid frame structure for enhanced stability and precision. Its St52-grade steel frame undergoes stress relief via vibration technology to maintain high parallelism and perpendicularity tolerances over extended operations. Ram and cushion systems operate independently, with precise stroke and pressure adjustments managed via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 efficiency class motors and PLC-based control, the press provides high efficiency, reliability, and long service life. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With a 150/50 ton capacity, this model is ideal for mass production, die test runs, and medium to high tonnage deep drawing operations. Key Advantages - Rigid four-post frame structure - Independent stroke and tonnage adjustment for ram and cushion - Complete control via touchscreen interface - High accuracy and repeatability - Low maintenance costs and long operational life Applications - Metal forming operations - Deep drawing applications - Die testing and production processes - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-Post FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 units, induction-hardened and chrome-plated SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 150 Ton CAPACITY (CUSHION): 50 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m RAM STROKE: 600 mm CUSHION STROKE: 200 mm MIN. DIE OPENING HEIGHT: 100 mm MAX. DIE OPENING HEIGHT: 700 mm WELDING STRESS RELIEF: Vibration method WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 18.5 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DOWN SPEED: 150 mm/s MOVABLE TABLE DRAWING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s CUSHION ADVANCE SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 280 mm – Ck45 CUSHION CYLINDER BORE: Ø 160 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. MACHINE HEIGHT: 3800 mm APPROX. MACHINE WIDTH: 1150 mm APPROX. MACHINE DEPTH: 1150 mm BED HEIGHT FROM FLOOR: 1200 mm PRE-FILL VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from the panel) RAM/CUSHION STROKE & TONNAGE SETTINGS: Adjustable via panel SYSTEM & PRESS STATUS MONITORING: Accessible via the touch panel Predsx N Ul Tjpfx Amfea DIE MEMORY: Adjustable via the panel LINEAR SCALE: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, moč: 7,5 kW (10,20 KM), stiskalna sila: 100 t, širina mize: 670 mm, dolžina mize: 950 mm, prebijalna sila: 100 t, prebojna odprtina v mizi: 180 mm, vrtina cilindra: 45 mm, nastavitev hoda: 120 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Presses are mechanical press machines that operate with force generated via an eccentric mechanism, designed for cold forming operations such as punching, cutting, and shaping with dies. Thanks to their high production speed and repeatability, they are efficient and reliable solutions for mass production lines. CRONOSSTECH C-Type Eccentric Press 100 Ton is designed for stable performance in cold forming applications. Featuring a rigid steel frame construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure, it delivers dependable performance suitable for series production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance need with central automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of Use - Cold cutting and punching operations - Cold breaking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slideway guides • Spheroidal cast connecting rod and gear bearings • Crankshaft and transmission shafts from 4140 tempered steel • Central full automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor movement • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch LCD screen (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster • Decoiler, feeder, and straightener • One set of dies according to customer specs • 8-sided slideway guides ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Table–ram distance: 400 mm Ram–table distance: 465 mm Distance between uprights: 420 mm Ram adjustment (shut height): 85 mm Prjdpfx Ajvtx Injmfja Approx. machine width: 1400 mm Approx. machine depth: 1900 mm Approx. machine height: 2450 mm Front anchorage dimension: 710 mm Side anchorage dimension: 1135 mm Table bore diameter: Ø200 mm Table size: 600×780 mm Die mounting slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Stroke per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approx. weight: 4650 kg Note: Please inform us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 200 mm, širina mize: 900 mm, dolžina mize: 1.800 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric presses are a type of mechanical press powered by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses deliver high stability and process security thanks to their rigid frame structures, especially in applications involving large tables and heavy dies. The CRONOSSTECH H-Type Eccentric Press 150 Ton is engineered for stable operation, die protection, and operator safety in high-volume production. Featuring a monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it offers reliable performance under continuous operation conditions. Key Advantages - Stable operation for large dies with wide table dimensions - Die/equipment protection with hydraulic overload safety device - Precise slide guidance with 8-point guide and counterbalance piston - Controlled and user-friendly operation via PLC & touchscreen panel - Enhanced operator safety with light curtain protection system Application Areas - Punching/cutting/forming applications requiring a large bolster - Mass production lines with automatic feeding systems - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • T-slotted extra bolster plate • 8-point guided slide • Adjustable stroke with single connecting rod • Slide with counterbalance piston • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse function • Hydraulic overload safety system • Motorized slide adjustment mechanism • Light curtain safety system • Enclosed gear system in oil sump • Dual-coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety door in front of bolster • Custom die configuration on request ✅ TECHNICAL SPECIFICATIONS (H TYPE – 150 TON) Capacity: 150 Ton Lower bolster usable area: 900×1800 mm Upper bolster usable area: 900×1800 mm Fixed stroke length: 200 mm Nominal material thickness: 7 mm SPM: 60 Max. closed die height: 500 mm Min. closed die height: 380 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of crankshafts: 2 Safety device: Hydraulic Control panel components: Siemens – Schneider Lubrication system: Automatic Display / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operating positions: 4 Die memory: 99 sets Mounting: Floor standing Frame type: Monoblock Motor power: 22 kW Motor speed (RPM): 1450 Approx. machine dimensions (L×W×H): 4500×3000×2000 mm Approx. weight: 20 Ton Note: Please contact us for any changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE Prjdpjx N Ru Defx Amfea This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2026, moč: 18,5 kW (25,15 KM), stiskalna sila: 150 t, hod: 700 mm, širina mize: 700 mm, dolžina mize: 1.000 mm, globina grla: 350 mm, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, 150 Ton C-Type Hydraulic Press – CHCP 150 – New / 24 Months Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly processes. The CHCP 150 C-Type Hydraulic Press, manufactured by CRONOSSTECH, has been developed for heavy-duty and continuous production applications, featuring a high tonnage capacity, reinforced frame construction, and precise operating performance. Key Advantages - High-strength, vibration-free steel construction frame - High precision (≤120 micron/metre) - PLC controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Design suitable for heavy-duty applications - Long service life and low maintenance cost Application Areas - Heavy-duty metal forming - Deep drawing and metal spinning operations - Pressing applications with dies - Cutting and punching operations - Automotive and sub-industry Standard Features - Steel construction frame stress-relieved by vibration method - PLC control and touch panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in compliance with ISO & DIN standards (≤120 micron/metre) - PARKER or REXROTH hydraulic system Prodpfjyzb D Hsx Amfsa - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 150 Pressing Force: 150 Ton Stroke: 700 mm Throat Depth: 350 mm Table – Ram Distance: 800 mm Table Dimensions: 700 x 1000 mm Press Depth: 1400 mm Press Width: 700 mm Table Height from Floor: 950 mm Total Height: 2800 mm Main Cylinder Diameter: Ø250 mm Motor Power: 18.5 kW Weight: 10500 kg General Information Place of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.500 t, hod: 1.000 mm, širina mize: 1.500 mm, dolžina mize: 2.400 mm, sila umika: 500 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 1500/500 H-Type Hydraulic Deep Drawing (Drawing) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-Type hydraulic deep drawing presses are engineered to provide maximum frame rigidity, precise parallelism, and long-term operational reliability for deep drawing applications that require very high tonnage and large bolster areas. Thanks to the 8-guide H-frame press structure, ram and bolster movements are controlled and stable throughout the pressing process. The CHSP 1500/500 model has been developed for large-dimension dies, deep drawing, and controlled forming operations, with a main ram capacity of 1500 tons and a cushion capacity of 500 tons. The vibration-stress-relieved welded steel frame offers high strength and reliability for heavy-duty industrial conditions. ⚙️ Standard Equipment • Welded steel construction, 8-guide H-frame body • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen panel • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination alert • Display of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-guide H-frame body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram / Cushion): 1500 / 500 Ton Moving / Fixed Bolster: 1500 × 2400 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Cushion): 1000 / 350 mm Daylight (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Cushion Cylinder: Ø360 mm – Ck45 (2 units) Pre-fill Valve: NG 200 Pjdpfxox N Ukij Amfjra PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 150 mm, premer stranskega valja: 130 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Mobile control panel - Centrally driven rolls powered by motor - Hydraulic up/down movement for rear and lower rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Lower and upper roll drive by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High-strength forged steel rolls made from certified SAE 1050 (CK45) steel - Hardened shafts - Digital readouts (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC control unit - Dual speed operation Prsdpfxjxw D Uds Amfsa - Stepless speed adjustment - Ejector system - Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Rolling Capacity: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, širina mize: 720 mm, dolžina mize: 1.000 mm, prebojna odprtina v mizi: 220 mm, nastavitev hidravličnega cilindra: 120 mm, nastavitev hoda: 125 mm, Oprema: varnostna svetlobna zapora, PLACE OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: IMMEDIATE FROM STOCK GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES Psdpfx Amjvyrywefsra - Steel construction frame - Vibration stress relief will be applied to the frame and welded components - Table parallelism and squareness tolerance conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 8 slideways - Ram with cushion cylinder - Ram, connecting rod, and clutch fork made of steel casting, GS52 - High-strength monoblock crankshaft – 4140 - Bronze bushings inside the connecting rod (Zr14) - Rear flywheel - Spare bolster plate included - Hydraulic overload protection - Motorized bed-to-ram adjustment - Automatic central lubrication - Pneumatic pedal with latch and dual-hand control with timer - Electrical cycle counter - PLC application and touchscreen - DELTA - Electrical switchgear components by SIEMENS-SCHNEIDER - CE application – OPTIONAL - Finger protection light curtains – SICK, LEUZE - Safety PLC (Controls complete electrical system, valves, dual-hand and pedal) – PILZ - Dual coil safety valve – GPA, TOPAIR - Panel and position-locked limit switches - Safety wedge - Protective covers in accordance with CE requirements TYPE: D-TYPE MONOBLOCK FRAME Capacity: 150 Ton Bed-to-Ram Distance: 500 mm Distance Between Housings: 1080 mm Ram Adjustment: 120 mm Approx. Press Width: 1400 mm Approx. Press Depth: 1900 mm Approx. Press Height: 3000 mm Table Bore Diameter: 220 mm Table Size: 720 x 1000 mm Die Clamping Slot Diameter: 55 mm Ram Size: 450 x 800 mm Bed Height from Floor: 900 mm Stroke Adjustment: 10 – 125 mm Strokes Per Minute: 50 spm Motor Power: 15 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 12,000 kg

Stanje: novo, Leto izdelave: 2025, moč: 11 kW (14,96 KM), največja višina reza: 1.500 mm, največja širina rezanja: 2.500 mm, trajanje garancije: 12 meseci, STANDARD FEATURES - Independently movable dual hydraulic vice - Linear rapid descent system - Variable band speed control Psdpsvvcpzofx Amfjra - Variable head descent speed control - Hydraulic blade tensioning system - Table drive system - Safety switches - Chip conveyor - Motorized chip brush - 1 bandsaw blade included - 24 months mechanical & 12 months electrical warranty - Country of origin: Turkey TECHNICAL SPECIFICATIONS CAPACITY ROUND (MM): 1500 CAPACITY SQUARE (MM): 1500x1500 CAPACITY RECTANGULAR (MM): 1500x2500 BLADE SIZE (MM): 80x1.6x15650 BLADE SPEED (M/MIN): 20 – 80 MAIN MOTOR (KW): 11 HYDRAULIC MOTOR (KW): 2.2 COOLANT PUMP (KW): 0.09 VOLTAGE (V): 380 FREQUENCY (HZ): 50 WORKING HEIGHT (MM): 600 MACHINE DIMENSIONS (MM): 7500x2150x3440 WEIGHT (KG): 21000 We manufacture both straight and mitre cutting models with capacities ranging from 220mm up to 3000mm. For more information, please contact us.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 1.500 t, hod: 1.000 mm, širina mize: 1.500 mm, dolžina mize: 2.400 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are designed for high-tonnage deep drawing, forming, and heavy-duty shaping applications. Its H-frame structure with 8 guideways ensures maximum rigidity and stability during pressing, helping maintain parallelism and perpendicularity tolerances. The CHP 1500 model provides a reliable solution for the automotive, defense, heavy metal forming, and industrial production lines with its large table dimensions, powerful hydraulic system, and high stroke capacity. The frame is stress-relieved by vibration methods, aiming for long-lasting and stable operation. ⚙️ Standard Equipment - Steel construction, H-frame with 8 guideways - Stress-relieved frame by vibration - Bronze Zr14 guideway bearings - WPQR and WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - Display of hydraulic oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 1500 Pjdpfex N T R Uex Amfjra Type: Steel construction, H-frame with 8 guideways Frame Material: St52 – ERDEMİR Guideway Bearings: Bronze Zr14 Capacity (Ram): 1500 Ton Moving Table Dimensions: 1500 × 2400 mm Fixed Table Dimensions: 1500 × 2400 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relieving: Vibration method Welding Application: EN ISO 15614-1/2017 WPQR and WPS, TÜRK-AK accredited Max. Operating Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Internal Diameter: Ø620 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approximate Height: 6250 mm Approximate Width: 3750 mm Approximate Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-Fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 70 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: dober (rabljeno), Linija za izdelavo brošur Duplo DSC-10/20 + DBM-150 + DBM-150T Ta stroj je v odličnem stanju in predstavlja najnovejšo linijo za izdelavo brošur podjetja Duplo. Izdelan na Japonskem, leto 2018. Upravljanje poteka preko nadzorne plošče. Linija obsega: – DSC-10/20 – naprava za združevanje listov – podajanje z vakuumom – LUL-HM – priključek za ročni podajalnik – DBM-150 – enota za šivanje in zlaganje – šivanje in zlaganje v eni enoti Psdpfx Aszw T Dhemfora – DBM-150T – sprednji rezalnik – Dolga izhodna miza – Vgrajeni zbiralnik za zlaganje listov. Stroj vključuje dokumentacijo, manjše dele itd.

Stanje: dober (rabljeno), Hang 150 dvoglavi kovičnik za registratorje Proizvajalec: Hang Nemčija Stroj je bil obnovljen in je pripravljen za uporabo. Uporablja se za kovičenje vseh vrst mehanizmov z obročem. Dve kovičnični glavi z nastavljivo razdaljo. Podpfszw Ragex Amfera Debelina kartona: 0,2-4 mm Globina grla: 310 mm Razdalja med glavama: nastavljiva od 35 do 440 mm Ciklični čas: 0,5 s Teža: 570 kg Napajanje: 380V Cikel se zažene s stopalko.

Stanje: zelo dobro (rabljeno), Catalogue number 7308 TECHNICAL DATA - Track width: 250 mm - Shaft width: 350 mm - Shaft diameter: 80 mm - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max. cutting height: 150 mm - Table width (with clearance): 700 mm - Table length: 1790 mm From above: - Pawls - Pressure, slip shaft - Pawls - Pressure, smooth shaft - Shaft with saw blades - Smooth, pressure shaft, 2 pcs From below: - Guide bar - Slip, smooth shaft - Pawls - Crawler track Feeding table: - Roller width: 500 mm - Number of rollers: 3 pcs - Total dimensions of feeding table (L/W/H): 580x530x900 mm Discharge table: - Roller width: 500 mm - Number of rollers: 6 pcs - Total dimensions of discharge table (L/W/H): 1210x535x900 mm - Central lubrication - Stepless feed speed adjustment - Main motor: 37 kW - Extraction outlet diameter: 140 mm - Overall dimensions of multirip saw (L/W/H): 2000x1450x2000 mm - Total weight: approx. 3000 kg ADVANTAGES Predpfx Aszww A Ismfsa – German-made – High cutting height – Infeed and outfeed tables – Used multirip saw in very good condition Net price: 46,900 PLN Net price: 11,160 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of larger exchange rate fluctuations, the price may change)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Proizvodna linija je v odličnem stanju, skoraj nova, in je takoj na voljo, saj ima le nekaj delovnih ur. Komponente proizvodne linije: 1. 150 mm 20D hladni vakuumski ekstruder (standardni model) 2. Glava za izdelavo gumijastih plošč (pnevmatična) 3. 6 m infrardeča peč za strjevanje (širina 1000 mm) 4. 6 m peč za strjevanje z vročim zrakom (širina 1140 mm) 5. 6 m peč za strjevanje z vročim zrakom (širina 1440 mm) 6. 6 m peč za strjevanje z vročim zrakom (širina 1600 mm) 7. 6 m peč za strjevanje z vročim zrakom (širina 1800 mm) 8. 6 m peč za strjevanje z vročim zrakom (širina 2000 mm) 9. 6 m peč za strjevanje z vročim zrakom (širina 2300 mm) Predpfx Aey Ez Ersmfea 10. 6 m peč za strjevanje z vročim zrakom (širina 2500 mm) 11. 6 m peč za strjevanje z vročim zrakom (širina 2800 mm) 12. 36 m (v 3 segmentih po 12 m) transportni in hladilni sistem 13. Avtomatski stroj za rezanje in obdelavo pločevine (1) 2000 mm 14. Velik hladilnik z rezervoarjem za vodo 15. Plinski grelec 16. PLC Če ste zainteresirani, vam z veseljem pošljemo podrobno opis in ustrezne podatke.

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7176 TEHNIČNI PODATKI - vhod zalagalnega lijaka 1050x600mm - izhod za zdrobljen les fi 160mm - delovna širina rotorja 590mm - glavni motor 18,5kW - motor črpalke 0,75kW - število nožev 14 kos - dimenzija noža 30x30mm - sito 10x12mm - pritisna predala - električni avto-reverz - dimenzije dol/šir/viš 1900x1200x1530mm - teža 990kg PREDNOSTI – avto-reverz – nemška proizvodnja – ni barvan – kot WEIMA WL4 – pritisna predala – zelo dobro stanje – rabljeni sekalnik Neto cena: 48,900 PLN Neto cena: 11,640 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR Podpfxszkha Ro Amfera (ob večjih nihanjih tečaja se lahko cena spremeni)