Cronosstech 2050X12Mm - 4 Zgornji Hidravlični Cilinder nakup rabljenega (60.995)

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Highly suitable for bending round and various diameter materials Lower roll and side rolls move hydraulically up and down in direct linear motion Protected against overloading The top roll is driven by an electric motor and planetary gearbox. The lower roll is driven by a cardan coupling system. Two rolls are driven The positions of the rolls are easily read with three digital displays The piece can be easily removed thanks to the hydraulically opening head Very easy operation with the mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety regulations and bears the CE mark Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) for support during large diameter bending Hydraulic side supports for support during large diameter bending Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Extractor system TECHNICAL SPECIFICATIONS Isdpfx Abow Slxzs Asib Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 38,5 kW (52,35 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * The lower, bottom, and side rolls move linearly up and down via body-mounted hydraulic pistons * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) Iisdpfx Ajxd S T Uob Aob * Roll positions are easily readable via three digital indicators * Rolled parts are easily removed due to hydraulically opening head and automatic lifting shaft * Very user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top support crane (elevator) for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic plate ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Top & Bottom Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19800 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 400 mm, premer zgornjega valja: 400 mm, premer stranskega valja: 300 mm, delovna širina: 2.550 mm, najv. debelina pločevine: 40 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT * The upper, lower, and side rolls move up and down linearly by means of pistons hydraulically attached to the frame. * Protected against overload. * The upper roll and side rolls are driven by a hydromotor and planetary gearbox (all three rolls are motor-driven). * The positions of the rolls are easily readable via three digital displays. * Easy removal of the rolled part thanks to the hydraulically opening head and the automatically lifting shaft. * Very easy operation with a movable control panel. * Welded steel construction frame. * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Cone bending system. * Central lubrication system. * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). * Electronic balancing system (Ø500-550-580-620-680). * Dual-speed operation system. OPTIONAL EQUIPMENT Iedpfx Ajxw Ebxjb Asib * NC and CNC control for automation. * Top crane (elevator) for supporting large diameter bending. * Hydraulic side supports for supporting large diameter bending. * Hydraulic sheet removal system. * Ground and polished rolls for special applications. * Stepless speed adjustment system. * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17,800 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 550 mm, premer zgornjega valja: 550 mm, premer stranskega valja: 450 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 70 kW (95,17 KM), trajanje garancije: 12 meseci, Oprema: kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * The bottom and side rolls are hydraulically operated with pistons attached to the frame, providing linear up-and-down movement * Protected against overload * The top and side rolls are driven by hydromotors and planetary gearboxes (three-roll motor drive) * The positions of the rolls are easily read with three digital indicators * Hydraulic opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Iedpfx Asxbzptjb Ajib Bending Length : 3100 mm Pre-bending : 50/40 mm Bending Thickness : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 25 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Roll positions can be easily read with three digital readouts * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC automation control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length : 2550 mm Pre-bending : 16/20 mm Bending : 20-25 mm Iisdpfxjw Smb Rs Ab Aob Upper & Lower Roll : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 4850 mm Width : 1900 mm Height : 1950 mm Weight : 12800 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 320 mm, premer zgornjega valja: 320 mm, premer stranskega valja: 240 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT * The lower, upper, and side rolls move up and down linearly via pistons attached to the body hydraulically * Protected against overload * The upper and side rolls are driven by hydromotors with planetary gearboxes (all three rolls are motor-driven) * Easy roll position reading with three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and automatically lifting shaft * User-friendly with movable control panel * Welded steel construction body Iijdpfx Ajxw Ebleb Ajb * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Upper & Lower Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Height : 1950 mm Weight : 10,500 kg

Stanje: novo, Leto izdelave: 2025, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 380 mm, premer zgornjega valja: 380 mm, premer stranskega valja: 300 mm, delovna širina: 3.100 mm, najv. debelina pločevine: 25 mm, Oprema: dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * Lower, upper, and side rolls move up and down linearly via hydraulic cylinders attached to the frame * Protected against overloading * Upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor-driven) * Roll positions are easily read via three digital position indicators * Folded parts can be removed easily thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending Iisdpsxw Ecvjfx Ab Aob * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Infinitely variable speed control system * Electronic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 16/20 mm Bending: 20/25 mm Upper & Lower Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 19200 kg

Stanje: novo, Sheet thickness: 10 mm Bending length: 3100 mm Top roller diameter: 270 mm Dimensions (L x W x H): 5600 x 1450 x 1600 mm Pre-bending capacity: 8 mm Motor: 11 kW Lower roller diameter: 250 mm Side roller diameter: 210 mm Technical Data: Iedpfxsd Ab R Sj Ab Ajib - Hardened and polished rollers - Complete frame made from ST-52 steel - Symmetrical 4-roller arrangement - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers driven by hydraulic system and gearbox - Vertical movement of lower roller hydraulically powered - Mobile control panel - CE-compliant Options: | Description | Quantity | Net price (€) | |-----|-----|-----| | Heating + cooling | 1 | 11,477 | | Infinitely variable speed | 1 | 3,323 | | Material feed table 1000 × 2000 – 1 pc. | 1 | 2,414 | | Central support | 1 | 15,857 | | Preparation for central support | 1 | 1,888 | | Side supports left and right | 1 | 5,020 | | Preparation for side support (instead of standard) | 1 | 1,923 | | CNC-CS6 control system | 1 | 18,200 | | NC-CS6 control system | 1 | 7,721 | | Ejection system | 1 | 13,020 |

Stanje: dober (rabljeno), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram Ijdpfxsdv D E Do Ab Aoib - Piston diameter: 32 mm - Piston rod: Ø 14 mm - Eye diameter: 12 mm - Stroke: 200 mm - Dimensions: 130/70/H405 mm - Weight: 3 kg

Stanje: skoraj kot novo (rabljeno), Neuporabljen, kot nov Tip: HZO 50/30/600/D/GL Premer bata: 50 mm Premer batnice: 30 mm Isdpoyxnwusfx Ab Aoib Hod: 600 mm Dovoljen tlak: 103 bar

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Neuporabljen, kot nov Iiodpeyxqmlefx Ab Asb Tip: HZOS 100/60/1200/D/FU Premer bata: 100 mm Premer batnice: 60 mm Hod: 1200 mm Dovoljeni tlak: 250 bar

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Neporabljen, kot nov Tip: HZOS 160/100/1200/D Premer bata: 160 mm Premer batnice: 100 mm Hod: 1200 mm Iodpfx Ajyxqrbeb Aeib Dovoljeno tlačno: 250 bar Teoretična tlačna sila: ca. 500 kN Teoretična vlečna sila: ca. 300 kN

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 15 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with mobile control panel * Lower rolls’ positions can be easily read via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Rolling system with roller bearings and conical mechanism * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends to allow installation of section and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (hoist) support for large diameter bending operations * Hydraulic side supports for large diameter bending operations * Ground and polished rolls for special applications * Section bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 10/13 mm Bending: 13/15 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 5150 mm Width: 1500 mm Height: 1550 mm Isdpfx Ajw Sld Rsb Aeib Weight: 9050 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 20 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls are moved up and down via hydraulic cylinders attached to the frame, allowing linear motion * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent workpiece thanks to hydraulically opening head and automatic lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame Iijdpjw Smdfofx Ab Ajb * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 12/16 mm Bending : 16/20 mm Top & Bottom Rolls : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 5350 mm Width : 1900 mm Height : 1950 mm Weight : 14,450 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 150 mm, premer stranskega valja: 130 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Mobile control panel - Centrally driven rolls powered by motor - Hydraulic up/down movement for rear and lower rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Lower and upper roll drive by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High-strength forged steel rolls made from certified SAE 1050 (CK45) steel - Hardened shafts - Digital readouts (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Rolling Capacity: 4/6 mm Iiodpfx Aoxw D Udeb Aob Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 22 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary reducer * The hydraulically opening head allows for easy removal of bent workpieces * Very easy operation with movable control panel * The position of the lower rolls can be easily read via two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends for mounting profile or pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special work * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16/20 mm Bending : 20/22 mm Upper & Lower Roll : 300 mm Side Roll : 280 mm Motor Power : 11 kW Bending Speed : 5 m/min Length : 4100 mm Width : 1500 mm Iiedsw Slg Sspfx Ab Asb Height : 1550 mm Weight : 7400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 400 mm, premer zgornjega valja: 400 mm, premer stranskega valja: 300 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 30 mm, STANDARD EQUIPMENT * The top, bottom, and side rolls move up and down linearly via hydraulic cylinders attached to the machine frame * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Easy removal of bent parts thanks to the hydraulically opening head and automatic lifting shaft * Highly user-friendly operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT Ijdpfxsw Sl T Se Ab Ajib * NC and CNC control for automation * Upper crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 20/25 mm Bending: 25/30 mm Top & Bottom Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Stanje: novo, Leto izdelave: 2025, moč: 22 kW (29,91 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 110 mm/s, višina mize: 955 mm, globina grla: 410 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 320 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) Iedpsx Nn I Ujfx Ab Asib • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-groove dies • Rear gauge X travel 1000 mm • AKAS or DSP front safety system with laser beam • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATION VALUE Bending Force (Ton) 320 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/s) 150 Return Speed (mm/s) 110 Pressing Speed (mm/s) 10 Oil Tank (L) 290 Machine Weight (kg) 16800 Main Motor (kW) 22 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam type) Safety System Front laser safety Origin Turkey

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 460 mm, premer zgornjega valja: 460 mm, premer stranskega valja: 380 mm, dolžina valja: 4.100 mm, najv. debelina pločevine: 25 mm, moč: 38,5 kW (52,35 KM), STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down by pistons hydraulically attached to the frame * Protected against overloading * Top and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * The positions of the rolls are easily readable via three digital displays * The hydraulically opening head and the automatically lifting shaft make it easy to remove the bent piece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK50) induction-hardened, forged, or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT Iodpfxew Sl I Ns Ab Asib * Automation with NC and CNC control * Top crane (elevator) for support in large diameter bending * Hydraulic side supports for support in large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-Bending Thickness : 16/20 mm Bending Thickness : 20/25 mm Top & Bottom Roll : 460 mm Side Roll : 380 mm Motor Power : 38.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2300 mm Height : 2350 mm Weight : 29500 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 280 mm, premer zgornjega valja: 280 mm, premer stranskega valja: 220 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 16 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move vertically via pistons hydraulically connected to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary gearbox (3 rolls motor-driven) * Roll positions are easily read with three digital displays * The hydraulically opening head and automatic rising shaft allow the workpiece to be easily removed Iiedpfx Abjw Smfcs Aob * Easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Central lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) support for large-diameter bending * Hydraulic side supports for large-diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed control system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll Diameter: 280 mm Side Roll Diameter: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 1.550 mm, delovna širina: 1.550 mm, najv. debelina pločevine: 15 mm, najv. debelina jeklene pločevine: 15 mm, moč: 7,5 kW (10,20 KM), trajanje garancije: 12 meseci, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload Iodpfoxbzr Usx Ab Ajib * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with movable control panel * Position of lower rolls can be easily read with two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends to mount profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Rollers for bending profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-Bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up and down movement for rear roll and lower roll Precision bending with braked main motor Conical bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear Roll Ball System for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 units) Operating manual OPTIONAL EQUIPMENT Top crane (hoist) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. bending diameter: 375 / 1250 mm Motor power: 7.5 + 1.5 kW Bending speed: 5 m/min Tank capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Isdsw Slcgspfx Ab Aeib Weight: 4800 kg

Stanje: novo, Leto izdelave: 2025, moč: 18,5 kW (25,15 KM), hod: 310 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 140 mm/s, višina mize: 965 mm, globina grla: 410 mm, delovna širina: 4.100 mm, upogibna sila (maks.): 220 t, razdalja med stojali: 3.600 mm, vrsta upravljanja: CNC krmiljenje, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, tip kronanja: poganjan z motorjem, vrsta aktuacije: hidravlični, STANDARD FEATURES CNC-controlled hydraulic press brake Y1 – Y2 – X – R axes CNC controlled (4 axes) CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display) Offline PC programming capability Stress-relieved, heavy-duty steel frame CNC-controlled synchronized cylinder system 310 mm stroke 410 mm throat depth ±0.03 mm precision servo motorized backgauge Backgauge travel distances: X axis: 750 mm R axis: 250 mm Backgauge system with ball screws and linear guides Sliding type front support arms Manual crowning system (wedge type) Isdpfxjx Nqqre Ab Ajib European-style narrow bottom table European-style quick upper tool clamping system (Promecam type) High-precision linear scales Standard upper tool (H: 67 mm – 85° – R: 0.8) Standard lower die (60×60 mm – 4-groove V: 16 / 22 / 35 / 50 mm) Laser front safety system LED lighting Foot pedal Emergency stop buttons Safety equipment compliant with CE standards OPTIONAL FEATURES Backgauge systems with 4 / 6 / 8 axes starting from X + R Extension of backgauge X axis distance to 1000 mm Additional backgauge fingers Hydraulic upper and lower tool clamping systems Motorized crowning system Wide bottom table for multi-groove dies Front safety laser system (AKAS or DSP) Rear safety light barrier CNC-controlled sheet metal front support systems Automatic angle measurement system Oil cooler or oil heater Electrical cabinet air conditioning cooling system Deep throat option TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL) Bending force: 220 tons Bending length: 4100 mm Distance between side frames: 3600 mm Stroke: 310 mm Open height (daylight): 515 mm Throat depth: 410 mm Table height: 965 mm Backgauge axes: X = 750 mm / R = 250 mm Approach speed: 180 mm/s Working speed: 140 mm/s Return speed: 10 mm/s Main motor power: 18.5 kW Oil tank capacity: 290 liters Machine weight: ~13,650 kg Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotor and planetary gearbox * Easy removal of bent parts thanks to hydraulically opening head * Very easy operation with movable control panel * Position of the lower rolls easily readable via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of rolls * Extended shaft ends for mounting profile/tube bending rolls OPTIONAL EQUIPMENT * Upper crane (lift) for support during large-diameter bending * Hydraulic side supports for large-diameter bending * Ground and polished rolls for special applications Iedpfxsw Slf Us Ab Asib * Section bending rolls for profile bending * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of rolls TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Rolling/Bending: 16/18 mm Upper & Lower Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 9 mm, skupna masa: 5.400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up-down movement for rear and lower rolls Precision bending with braked main motor Conical and pre-bending system Lower and upper roll drive via planetary gearbox Rear roll ball system for easy sheet movement Compliance with EU safety directives High strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) User manual OPTIONAL EQUIPMENT Top crane (elevator) for support during large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option Isdpfxew Slbvj Ab Ajib TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 lt Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg