Cetos Cilindrični Brusilni Stroj nakup rabljenega (31.475)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7085, Rabljeni univerzalni brusilni stroj Proizvajalec WMW Tip: SU 315 x 1000 mm Z notranjo napravo za brušenje Maks. premer obdelovanca: 315 mm Maks. dolžina obdelave: 1000 mm Hitrost brusilnega vretena: 1340 obr/min Hitrost obdelovanca: 22–500 obr/min Premik mize pri vzdolžnem brušenju: 5–1680 mm Hitrost mize: 0,05–5 m/min Maks. masa obdelovanca: 300 kg Priključna moč: 12,5 kW Kedpfewl A H Dox Aczenb Teža stroja pribl.: 5,8 t

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1987, Funkcionalnost: nepreverjeno, številka stroja/vozila: 20119, Ponujamo to, že pripravljeno za uporabo, cilindrično brusilnico Studer S35, izdelano leta 1987. Proizvajalec: Studer Ksdozvvzyspfx Aczsnb Model: S35 Leto izdelave: 1987 Stanje: pripravljeno za uporabo Kategorija: 1373 Tip: cilindrična brusilnica Če imate dodatna vprašanja ali potrebujete več informacij, nam prosto pošljite sporočilo ali nas pokličite.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C210068/9002194, dolžina brušenja: 750 mm, premer brusilnega koluta: 400 mm, skupna širina: 2.750 mm, skupna dolžina: 1.950 mm, skupna višina: 1.750 mm, premer brušenja: 250 mm, Stroj popolnoma opremljen s filtrirno enoto in opisom Knsdpfx Aexz Tvxjczjb Premer brušenja (največji premer obdelovanca): 250 mm Razdalja med konicama / največja dolžina brušenja: 750 mm Brusilni kolut (največja velikost): 400 × 40 × 127 mm Moč motorja brusilnega vretena: 5 kW Obrati brusilnega koluta: pribl. 2140 / 2640 min⁻¹ Vpenjanje obdelovanca: med konicami, konjiček; primerno za zunanje cilindrično brušenje Dolžina / širina / višina (približne skupne mere stroja): pribl. 2750 mm / 1950 mm / 1750 mm Teža stroja: pribl. 3,9 t (≈ 3900 kg)

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor water-cooled, 9.8 kW - Marposs tool measurement - Active longitudinal positioning - Kel-Set - GAP on T1 and T2 from ELASO, contactless, integrated into the control interface - GAP on T3/T4 via fluid sensor - Semi-automatic balancing by ELASO integrated into the control interface for T1/T2 - Hydraulic tailstock with fine adjustment +/- 150 μm - Dressing device on lower table, workpiece spindle side - Dressing device on lower table, tailstock side - Dressing device on upper table - New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle head with direct drive * Strongly recommended for non-circular grinding * Max. workpiece weight (chucked): 75 kg * Max. workpiece weight (between centers): 150 kg * Water-cooled * MK5 combined with short taper mounting DIN 55026 * Oriented spindle stop * Fixed base B-axis with direct drive, centre height 225 mm * Extremely torsion-resistant * High positioning accuracy * Resolution ° * Water-cooled MECHANICAL OVERHAUL: - Complete machine refurbished according to Kellenberger measurement protocol - Repainted New hydraulic power unit: - Improved temperature control (oil cooler) - Energy-saving: Only one pump, not running continuously! - Pressure monitoring - Monitoring of water content in hydrostatic oil (early detection of bellows damage) Hydrostatic ball screw drive in X-axis - Wear-free, as no contact during operation - No loss of accuracy, even during prolonged operation under full load at max. speed - Frictionless at low speeds - No reversal backlash when changing direction - Transmits minimal rotational movements - No stick-slip effect at low speeds - No fluctuations in friction torque due to ball circulation - Higher axial stiffness than ball screws - Significantly better damping, resulting in improved workpiece surface and tool life - No oscillations due to ball circulation Knodpouxfu Nofx Aczeb - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor with higher accuracy and much lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling requirements than linear motors Electrical overhaul: - Brand new, modern CNC cylindrical grinding control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, BERUS pressure switches, etc. - New absolute linear scales in X and Z axes - New absolute encoder (for B-axis) Control: The grinding software consists of a basic license and various options that can be enabled depending on machine equipment. Basic software: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on the wheel) - Semi-automatic oscillation grinding - Workpiece...

Stanje: rabljeno, Leto izdelave: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Knedpfxst Ii Nbo Aczjb Machine weight: approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with some optional features. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/face grinding - B-axis automatic, 1° Hirth serration - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount, 400 mm diameter - Right grinding wheel mount, 300 mm diameter - Internal grinding device with belt drive - Tailstock with micro adjustment - Fine adjustment on swivel table - Paper band filter SBP4, 240l

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1,500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Kjdsd Ih Dvepfx Aczenb Table swivel: ± 6° Longitudinal travel of table: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight – cantilevered: 130 kg incl. clamping Internal spindle receptacle: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Space requirement approx.: 5.6 x 2.0 m As a global leader in the field of Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer servicing for your machines. Geometrically overhauled and newly painted with original electrics, but with new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - Digital display on 2 axes. Resolution x-axis 0.5 µm Possible options at extra charge: - Upper table swivel angle display - Rotary encoder with digital readout in workpiece spindle stock - Rotary encoder with digital readout in grinding spindle stock (no height adjustment possible with spindle) - New stable internal grinding device, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm Included: - Operating tools - Draw tube for chuck Further accessories available on request. At present, the machine tool does not meet the basic safety and protection requirements as specified in BetrSichV 2015. Raising the required minimum protection target must be determined by means of a risk assessment according to BetrSichV.

Stanje: rabljeno, Leto izdelave: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit Fanuc 310is Completely mechanically overhauled. Includes grinding process and setup for one part. Original photo of the machine from EMO 2010. CNC control GE Fanuc 310is Hand panel for GE Fanuc CNC control With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Left grinding wheel assembly 500 x 80 mm Right grinding wheel assembly 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ Ksdpevdk N Eefx Aczenb High-frequency internal grinding spindle MFN 1090 Coolant supply through workpiece spindle Dressing device on the upper table Swivelling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on workpiece spindle headstock for internal and external grinding Provisions for measuring controls Movomatic ESZ 400 or Marposs P7 ME Provisions for external filter Coolant shut-off for table devices Full enclosure for emulsion Emulsion mist extraction system Maintenance unit for pneumatic auxiliary functions Provisions for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for Arobo steady rest

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: Knedpfx Aceuxfucezob - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 250 mm Grinding length: 400 mm Centre height: 125 mm Control: Fanuc 21i-T Machine serviced and partially overhauled. - New grinding spindle bearings - New X-axis spindle - Upper table surface reground - New table geometry Ksdpovx Dvuofx Aczsnb - New geometry: workpiece support (WSS) to grinding spindles B-axis with 1° Hirth serration Longitudinal positioning HF internal grinding spindle Gap control (GAP) Paper band filter

Stanje: rabljeno, Leto izdelave: 1990, Premer brušenja 360 mm Dolžina brušenja 1000 mm Višina med konicama 180 mm Teža obdelovanca med konicama maks. 250 kg Ksdpfx Aoxbh Ebsczenb Stroj z zelo malo delovnimi urami po obnovi pri strokovnjaku Karstens. Krmiljenje podajanja Jetter Digitalni prikazovalnik Naprava za notranje brušenje Konjiček z natančno nastavitvijo cilindričnosti Hidravlična pinola konjička itd. Hitro nastavljanje brusnega vretenjaka z zračnim ležiščem

Stanje: rabljeno, Leto izdelave: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm The machine has been overhauled according to the Kellenberger measurement protocol and newly painted. Knodpjvq R Uzofx Aczob The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means that, in the process, the machine also received completely new electrical equipment. The machine features a reinforced workpiece headstock for through-feed grinding of heavy workpieces. At present, the machine does not comply with the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV) 2015. Raising the required minimum protection level must be determined by a risk assessment in accordance with the BetrSichV.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1962, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.050 kg, vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, Prodam: VEB Schleifmaschinenwerk Berlin / WMW SI 40×70, strojno orodje za cilindrično brušenje, leto izdelave 1962, serijska številka 1334/62, izdelano v Nemčiji. Stroj je popoln in v tehnično brezhibnem stanju, kar omogoča njegovo uporabo. Stroj si je mogoče ogledati in preizkusiti na kraju samem pred nakupom. WMW / VEB Schleifmaschinenwerk Berlin je znan po robustnih industrijskih strojih za brušenje, ki so zasnovani za intenzivno uporabo v delavnicah in proizvodnji. Tehnični podatki: Proizvajalec: WMW / VEB Schleifmaschinenwerk Berlin Tip: SI 40×70 Serijska številka: 1334/62 Leto izdelave: 1962 Država izdelave: Nemčija Skupna teža: približno 1.050 kg Električna shema: SI 40-007 Shema ožičenja: SI 40-008 Napajanje: trifazni izmenični tok Frekvenca: 50 Hz Delovna napetost: 380 V Nadzorna napetost: 220 V Stanje: Rabljen, delujoče stanje Kedsznvqlspfx Aczenb Pred nakupom je mogoč ogled in preizkusni zagon. Transport: Transport je mogoč po vsej Poljski po predhodnem dogovoru. Prodajni dokument: Na voljo je račun ali potrdilo z DDV. Kontakt: Prosimo, kontaktirajte nas za dogovor o ogledu, prevzemu ali transportu.

Stanje: rabljeno, KELLENBERGER KEL‑VISTA UR 175/1000 je CNC okrogla brusilnica, zasnovana za natančnost, visoko natančnost in zanesljivost. Kapacitete: višina med konicami 175 mm, razdalja med konicami 1000 mm, največja teža obdelovanca 100 kg; brusilni disk Ø400×63 mm, premer izvrtine 127 mm; hod vodila 50 mm, največji nagib mize 9°. Tehnični podatki: obodna hitrost 35 m/s, vrtljaji 8–800 vrt/min (brezstopenjsko), motor brusilnega vretena 5 kW, hitri hod 12 m/min, konus vretena ASA5/MK5, mere D3200׊1700×V2000 mm. Dodatna oprema: sistem za hlajenje, papirnati filtrirni sistem, komplet brusilnih diskov. Dosega ozke tolerance; primerna za avtomobilsko industrijo, letalstvo, orodjarstvo in medicinsko tehnologijo. Ksdpfx Aoz Dvzasczenb

Stanje: rabljeno, Grinding diameter 350 mm Knsdpfx Ast Ii Rrjczeb Grinding length 1500 mm Centre height 175 mm Machine weight approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle rebuilders - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! The internal grinding spindle can only be switched on when in position A quantum leap in safety - Infinitely variable grinding spindle speed 1000-1500 rpm - Infinitely variable internal grinding spindle speed 0-100% - Digital display of grinding spindle speeds - Swivel angle display on the upper table - Swivel angle display on the grinding spindle headstock - Marposs touch sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Machine already delivered. An identical machine can be built with additional options. The machine tool does not currently meet the essential safety and protection requirements as set out in the BetrSichV 2015. The required minimum safety objective must be determined by a risk assessment in accordance with the BetrSichV.

Stanje: rabljeno, Grinding diameter: 250 mm Grinding length: 1000 mm Center height: 125 mm Knodpfsd Ih Egox Aczeb Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: +/- 360° Grinding spindle head swiveling: +/- 0° Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: +/- 10° Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (unsupported, including clamping): 130 kg Cross travel: 270 mm Tailstock quill taper: MK3 Quill travel: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t As a global leader in Kellenberger overhauls/retrofits, we can not only deliver machines in as-new condition with warranty, but we also offer service for your equipment. Geometrically refurbished and newly painted according to Kellenberger test protocol. Completely new electrics with new infeed control system. Photos show a previously delivered machine of the same model, but with 1500 mm center distance and a universal grinding head instead of 500 mm wheel head for external cylindrical grinding only. Equipment: - 2-axis digital readout - New DGS paper band filter Optional at additional cost: - Semi-automatic dressing - Dressing compensation - GAP control - Measuring automation - Safety doors Electronically controlled infeed system with stepper motor drive. Hydraulic table traverse and rapid movement. Powerful, non-swiveling grinding spindle stock for production external cylindrical grinding operations. Application areas: Machining of high-precision components for gear manufacturing, machine tool, and general mechanical engineering. Match grinding for the hydraulics industry. At this time, the machine does not meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety objective must be determined by a risk assessment according to BetrSichV.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Kedsuxfupspfx Aczjnb Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Workpiece weight max. (fly): 130 kg including clamping Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Picture of a previously delivered machine. - Operation via touch panel is extremely simple. - The symbols on the control panel are nearly identical to the original system, so no extensive retraining required. - Diagnostic function with display of PLC messages and digital I/Os. - Dressing function can be expanded or modified per customer request. - Oriented spindle stop for workpiece spindle available on request. - New maximum infeed amount: 40 mm (can be optionally increased). - Digital readout on 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding spindle headstock (no height adjustment with spindle possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Collet tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system (X-axis) with stepper motor drive. Hydraulic table traverse and rapid feed. Versatile application in production for external and internal cylindrical grinding, or for combined external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control system The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety targets must be determined by a risk assessment according to BetrSichV.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: nepreverjeno, Vretenčni nosilec: MK5 Podporni nosilec: MK3, hidravlični Višina med centri: 100 mm Razdalja med centri: 650 mm Dolžina brušenja: 620 mm Brušno kolo: 500 x 80 x 203,2 Kodpocwuluofx Aczjnb Stanje stroja: CNC krožna brusilka bo v celoti razstavljena, na novo pobarvana, vodila bodo očiščena (vključno s popravkom geometrije), vsi obrabljeni deli in vretena (osi X in Z) bodo zamenjani, vse sklopne enote pa bodo obnovljene v skoraj novo stanje. Krmilnik Marposs E-14 bo zamenjan s krmilnikom SIEMENS ONE ali FANUC. Preizkušanje stroja bo izvedeno po protokolu TSCHUDIN. Dodatna oprema stroja: - 1 kos krmilnika SIEMENS ONE ali FANUC z integrirano funkcijo varnosti - 1 kos ročnega krmilnika z ročnim kolesom za ročno pozicioniranje osi - 1 kos vretenčnega nosilca MK5 - 1 kos podpornega nosilca MK3, hidravličnega - 1 kos sistema za nadzor razmika - 1 kos prirobnice brušnega kolesa - 1 kos zaščitnega pokrova z nadzorom vrat - 1 komplet strojnega orodja in dokumentacije Stroj nima delovnih ur in je bil v celoti obnovljen z novim krmilnikom SIEMENS ONE ali FANUC.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1500 mm Knjdot Ii Rfepfx Aczeb Centre height: 175 mm Left grinding wheel: 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR CNC control with BEMA cylindrical grinding interface. Featuring a new, service-friendly enclosure. Fully overhauled according to Kellenberger measurement protocol.

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal travel of table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – floating: 130 kg incl. clamping Internal spindle fitting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Available immediately, supplied with 12-month warranty as standard! Geometrically overhauled and newly painted with new electrics. In KELLENBERGER quality! - Digital readout on 2 axes. X-axis resolution 0.5 µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request Knjdpfxjv I Eq Sj Aczsb At present, the machine tool does not meet the basic safety and health requirements as stated in the German Industrial Safety Regulation (BetrSichV) 2015. A risk assessment according to BetrSichV must be carried out to determine the necessary minimum protection.

Stanje: rabljeno, Grinding diameter 350, 450 mm Grinding length 600 mm Centre height 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding headstock swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Plunge feed (per stroke) 0.001–0.030 mm/Ø Continuous infeed 0–0.95 mm/Ø Table swivelling ±10° Longitudinal table travel 900 mm Table traverse speed 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight—unsupported 130 kg including clamping Internal spindle mounting 70 mm Total power requirement 6.5 kW Machine weight approx. 2.2 t Space requirement approx. 3.1 x 2.0 m As a global market leader in Kellenberger overhauls/retrofitting, we not only deliver machines in like-new quality with warranty, but also offer service for your machines, with metric overhaul and new paintwork. Photo shows a previously delivered machine with possible different options. Machine is equipped as standard with central lubrication and roller guideway in the X-axis flat bed, as well as air lift in the grinding headstock. Knsdpfod Ih D Eex Aczeb BEMA standard features: - Digital display in 2 axes. X-axis resolution 0.5 micron - Speed display for grinding spindle - Stepless grinding spindle speed 70–100% - Stepless internal grinding spindle speed 70–100% - Workpiece spindle driven by three-phase motor, infinitely variable via frequency inverter Optional equipment (subject to extra charge): - Encoder with digital display in workpiece headstock - Encoder with digital display in grinding headstock (spindle height adjustment not possible) - Sine bar - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Drawbar for chuck Of course, our fully reconditioned machines come with 12 months warranty (only applicable to neighbouring countries). Further accessories on request. The machine tool does not currently meet the essential safety and protection requirements as outlined in the German Occupational Safety Ordinance (BetrSichV) 2015. Determination of required minimum safety level must be established via a risk assessment according to BetrSichV.

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Knedpfed Ih D Hjx Aczjb Workpiece spindle taper: Morse taper 5 (MK5) Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Photo shows identical machine with 225 mm center height Version R: Machine features central lubrication and roller guides in the flat-way X-axis as well as air lift in the grinding headstock. - Two-axis digital readout. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout in workpiece headstock - Rotary encoder with digital readout in grinding headstock (no height adjustment possible with spindle) - New robust internal grinding device, 80 mm or 100 mm diameter, with height adjustment - Increase of center height up to max. 225 mm - Variable speed control for grinding spindle Includes: - Operating tools - Clamping tube for chuck Additional accessories available on request. At the present time, the machine tool does not meet the basic safety and protection requirements as defined in BetrSichV 2015. An assessment to determine if the required minimum protection targets are met must be carried out as per the risk assessment under BetrSichV.

Stanje: rabljeno, Leto izdelave: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Control system: Fanuc 310is CNC control: GE Fanuc 310is Hand-held panel for GE Fanuc CNC control Overhauled according to Kellenberger protocol Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCBN diamond inserts Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing systems KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle housing for internal and external grinding Prepared for measuring controls Movomatic ESZ 400 or Marposs P7 ME Prepared for external filtration system Coolant shut-off for table units Full enclosure for emulsion Mist extraction system for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader Ksdoy U N Hispfx Aczjnb KEL-POS, MOVOMATIC: measuring probe C25 Hydraulic preparation for Arobo steady rest

Stanje: rabljeno, Leto izdelave: 2002, Premer brusilnega diska: 350 mm Dolžina brušenja: 1000 mm Višina med centri: 175 mm Stroj je v odličnem stanju. Kedpezz S Awjfx Aczsnb Vzdrževanje in geometrična nastavitev po protokolu Kellenberger. Stroj z diagonalno glavo: Nadzor: Heidenhain 1830M -T1 450x80x203,2 mm -T4 450x80x203,2 mm Moč pogona motorja brusilne glave: 9,2 kW -Os B z visoko ločljivostjo -Kel-Net, vmesnik Ethernet -hidravlični povrat konusa za podporno pripravo -pnevmatsko razbremenjevanje za podporno pripravo -standardna vretenčna glava za obdelovanec, MK 5 DIN 55026, velikost 5" -spodnji del fiksiran za standardno vretenčno glavo za obdelovanec -KELPOS, aktivna dolžinska pozicija Marposs, nameščen na brusilni glavi -GAP Marposs

Stanje: rabljeno, Leto izdelave: 1990, Premer brušenja 200 mm Dolžina brušenja 340 mm Višina konic 100 mm Krmiljenje CNC Priključna moč 25 kVA Obratovalna napetost 110 / 220 / 3x165 / 3x380 VAC Ksdpfxoywnt Hj Aczenb Krmilna napetost 24 VDC

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Kjdpot Ii Nusfx Aczsnb Table swivel range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight – cantilevered: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a world-leading company in the field of Kellenberger – overhaul / retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer service for your machines. Machine geometrically overhauled and repainted with original electrics. Photo shows a recently delivered 600U. -Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80mm or 100mm, with height adjustment - Increase of centre height to max. 225mm - Variable speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently fulfil the basic safety and protection requirements as specified in BetrSichV 2015. The required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.